From 102b0d2daa97dae68d3eed54d8fe37a9cc38a892 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 28 Apr 2024 11:13:47 +0200 Subject: Adding upstream version 2.8.0+dfsg. Signed-off-by: Daniel Baumann --- plat/marvell/armada/a8k/a80x0/board/dram_port.c | 147 +++++++++++++++ .../armada/a8k/a80x0/board/marvell_plat_config.c | 202 +++++++++++++++++++++ .../armada/a8k/a80x0/board/phy-porting-layer.h | 192 ++++++++++++++++++++ plat/marvell/armada/a8k/a80x0/mvebu_def.h | 17 ++ plat/marvell/armada/a8k/a80x0/platform.mk | 20 ++ 5 files changed, 578 insertions(+) create mode 100644 plat/marvell/armada/a8k/a80x0/board/dram_port.c create mode 100644 plat/marvell/armada/a8k/a80x0/board/marvell_plat_config.c create mode 100644 plat/marvell/armada/a8k/a80x0/board/phy-porting-layer.h create mode 100644 plat/marvell/armada/a8k/a80x0/mvebu_def.h create mode 100644 plat/marvell/armada/a8k/a80x0/platform.mk (limited to 'plat/marvell/armada/a8k/a80x0') diff --git a/plat/marvell/armada/a8k/a80x0/board/dram_port.c b/plat/marvell/armada/a8k/a80x0/board/dram_port.c new file mode 100644 index 0000000..47bc0a8 --- /dev/null +++ b/plat/marvell/armada/a8k/a80x0/board/dram_port.c @@ -0,0 +1,147 @@ +/* + * Copyright (C) 2018 Marvell International Ltd. + * + * SPDX-License-Identifier: BSD-3-Clause + * https://spdx.org/licenses + */ + +#include +#include +#include +#include + +#include +#include +#include + +#define MVEBU_AP_MPP_CTRL0_7_REG MVEBU_AP_MPP_REGS(0) +#define MVEBU_AP_MPP_CTRL4_OFFS 16 +#define MVEBU_AP_MPP_CTRL5_OFFS 20 +#define MVEBU_AP_MPP_CTRL4_I2C0_SDA_ENA 0x3 +#define MVEBU_AP_MPP_CTRL5_I2C0_SCK_ENA 0x3 + +#define MVEBU_CP_MPP_CTRL37_OFFS 20 +#define MVEBU_CP_MPP_CTRL38_OFFS 24 +#define MVEBU_CP_MPP_CTRL37_I2C0_SCK_ENA 0x2 +#define MVEBU_CP_MPP_CTRL38_I2C0_SDA_ENA 0x2 + +#define MVEBU_MPP_CTRL_MASK 0xf + +/* + * This struct provides the DRAM training code with + * the appropriate board DRAM configuration + */ +static struct mv_ddr_topology_map board_topology_map = { + /* MISL board with 1CS 8Gb x4 devices of Micron 2400T */ + DEBUG_LEVEL_ERROR, + 0x1, /* active interfaces */ + /* cs_mask, mirror, dqs_swap, ck_swap X subphys */ + { { { {0x1, 0x0, 0, 0}, /* FIXME: change the cs mask for all 64 bit */ + {0x1, 0x0, 0, 0}, + {0x1, 0x0, 0, 0}, + {0x1, 0x0, 0, 0}, + {0x1, 0x0, 0, 0}, + {0x1, 0x0, 0, 0}, + {0x1, 0x0, 0, 0}, + {0x1, 0x0, 0, 0}, + {0x1, 0x0, 0, 0} }, + /* TODO: double check if the speed bin is 2400T */ + SPEED_BIN_DDR_2400T, /* speed_bin */ + MV_DDR_DEV_WIDTH_8BIT, /* sdram device width */ + MV_DDR_DIE_CAP_8GBIT, /* die capacity */ + MV_DDR_FREQ_SAR, /* frequency */ + 0, 0, /* cas_l, cas_wl */ + MV_DDR_TEMP_LOW} }, /* temperature */ +#if DDR32 + MV_DDR_32BIT_ECC_PUP8_BUS_MASK, /* subphys mask */ +#else + MV_DDR_64BIT_ECC_PUP8_BUS_MASK, /* subphys mask */ +#endif + MV_DDR_CFG_SPD, /* ddr configuration data source */ + NOT_COMBINED, /* ddr twin-die combined*/ + { {0} }, /* raw spd data */ + {0}, /* timing parameters */ + { /* electrical configuration */ + { /* memory electrical configuration */ + MV_DDR_RTT_NOM_PARK_RZQ_DISABLE, /* rtt_nom */ + { + MV_DDR_RTT_NOM_PARK_RZQ_DIV4, /* rtt_park 1cs */ + MV_DDR_RTT_NOM_PARK_RZQ_DIV1 /* rtt_park 2cs */ + }, + { + MV_DDR_RTT_WR_DYN_ODT_OFF, /* rtt_wr 1cs */ + MV_DDR_RTT_WR_RZQ_DIV2 /* rtt_wr 2cs */ + }, + MV_DDR_DIC_RZQ_DIV7 /* dic */ + }, + { /* phy electrical configuration */ + MV_DDR_OHM_30, /* data_drv_p */ + MV_DDR_OHM_30, /* data_drv_n */ + MV_DDR_OHM_30, /* ctrl_drv_p */ + MV_DDR_OHM_30, /* ctrl_drv_n */ + { + MV_DDR_OHM_60, /* odt_p 1cs */ + MV_DDR_OHM_120 /* odt_p 2cs */ + }, + { + MV_DDR_OHM_60, /* odt_n 1cs */ + MV_DDR_OHM_120 /* odt_n 2cs */ + }, + }, + { /* mac electrical configuration */ + MV_DDR_ODT_CFG_NORMAL, /* odtcfg_pattern */ + MV_DDR_ODT_CFG_ALWAYS_ON, /* odtcfg_write */ + MV_DDR_ODT_CFG_NORMAL, /* odtcfg_read */ + }, + } +}; + +struct mv_ddr_topology_map *mv_ddr_topology_map_get(void) +{ + /* Return the board topology as defined in the board code */ + return &board_topology_map; +} + +static void mpp_config(void) +{ + uintptr_t reg; + uint32_t val; + + reg = MVEBU_CP_MPP_REGS(0, 4); + /* configure CP0 MPP 37 and 38 to i2c */ + val = mmio_read_32(reg); + val &= ~((MVEBU_MPP_CTRL_MASK << MVEBU_CP_MPP_CTRL37_OFFS) | + (MVEBU_MPP_CTRL_MASK << MVEBU_CP_MPP_CTRL38_OFFS)); + val |= (MVEBU_CP_MPP_CTRL37_I2C0_SCK_ENA << + MVEBU_CP_MPP_CTRL37_OFFS) | + (MVEBU_CP_MPP_CTRL38_I2C0_SDA_ENA << + MVEBU_CP_MPP_CTRL38_OFFS); + mmio_write_32(reg, val); +} + +/* + * This function may modify the default DRAM parameters + * based on information received from SPD or bootloader + * configuration located on non volatile storage + */ +void plat_marvell_dram_update_topology(void) +{ + struct mv_ddr_topology_map *tm = mv_ddr_topology_map_get(); + + INFO("Gathering DRAM information\n"); + + if (tm->cfg_src == MV_DDR_CFG_SPD) { + /* configure MPPs to enable i2c */ + mpp_config(); + + /* initialize i2c */ + i2c_init((void *)MVEBU_CP0_I2C_BASE); + + /* select SPD memory page 0 to access DRAM configuration */ + i2c_write(I2C_SPD_P0_ADDR, 0x0, 1, tm->spd_data.all_bytes, 0); + + /* read data from spd */ + i2c_read(I2C_SPD_ADDR, 0x0, 1, tm->spd_data.all_bytes, + sizeof(tm->spd_data.all_bytes)); + } +} diff --git a/plat/marvell/armada/a8k/a80x0/board/marvell_plat_config.c b/plat/marvell/armada/a8k/a80x0/board/marvell_plat_config.c new file mode 100644 index 0000000..4ccda14 --- /dev/null +++ b/plat/marvell/armada/a8k/a80x0/board/marvell_plat_config.c @@ -0,0 +1,202 @@ +/* + * Copyright (C) 2018 Marvell International Ltd. + * + * SPDX-License-Identifier: BSD-3-Clause + * https://spdx.org/licenses + */ + +#include + +/* + * If bootrom is currently at BLE there's no need to include the memory + * maps structure at this point + */ +#include +#ifndef IMAGE_BLE + +/***************************************************************************** + * AMB Configuration + ***************************************************************************** + */ +struct addr_map_win amb_memory_map[] = { + /* CP1 SPI1 CS0 Direct Mode access */ + {0xf900, 0x1000000, AMB_SPI1_CS0_ID}, +}; + +int marvell_get_amb_memory_map(struct addr_map_win **win, uint32_t *size, + uintptr_t base) +{ + *win = amb_memory_map; + if (*win == NULL) + *size = 0; + else + *size = ARRAY_SIZE(amb_memory_map); + + return 0; +} +#endif + +/***************************************************************************** + * IO WIN Configuration + ***************************************************************************** + */ +struct addr_map_win io_win_memory_map[] = { + /* CP1 (MCI0) internal regs */ + {0x00000000f4000000, 0x2000000, MCI_0_TID}, +#ifndef IMAGE_BLE + /* PCIe0 and SPI1_CS0 (RUNIT) on CP1*/ + {0x00000000f9000000, 0x2000000, MCI_0_TID}, + /* PCIe1 on CP1*/ + {0x00000000fb000000, 0x1000000, MCI_0_TID}, + /* PCIe2 on CP1*/ + {0x00000000fc000000, 0x1000000, MCI_0_TID}, + /* MCI 0 indirect window */ + {MVEBU_MCI_REG_BASE_REMAP(0), 0x100000, MCI_0_TID}, + /* MCI 1 indirect window */ + {MVEBU_MCI_REG_BASE_REMAP(1), 0x100000, MCI_1_TID}, +#endif +}; + +uint32_t marvell_get_io_win_gcr_target(int ap_index) +{ + return PIDI_TID; +} + +int marvell_get_io_win_memory_map(int ap_index, struct addr_map_win **win, + uint32_t *size) +{ + *win = io_win_memory_map; + if (*win == NULL) + *size = 0; + else + *size = ARRAY_SIZE(io_win_memory_map); + + return 0; +} + +#ifndef IMAGE_BLE +/***************************************************************************** + * IOB Configuration + ***************************************************************************** + */ +struct addr_map_win iob_memory_map_cp0[] = { + /* CP0 */ + /* PEX1_X1 window */ + {0x00000000f7000000, 0x1000000, PEX1_TID}, + /* PEX2_X1 window */ + {0x00000000f8000000, 0x1000000, PEX2_TID}, + /* PEX0_X4 window */ + {0x00000000f6000000, 0x1000000, PEX0_TID}, + {0x00000000c0000000, 0x30000000, PEX0_TID}, + {0x0000000800000000, 0x100000000, PEX0_TID}, +}; + +struct addr_map_win iob_memory_map_cp1[] = { + /* CP1 */ + /* SPI1_CS0 (RUNIT) window */ + {0x00000000f9000000, 0x1000000, RUNIT_TID}, + /* PEX1_X1 window */ + {0x00000000fb000000, 0x1000000, PEX1_TID}, + /* PEX2_X1 window */ + {0x00000000fc000000, 0x1000000, PEX2_TID}, + /* PEX0_X4 window */ + {0x00000000fa000000, 0x1000000, PEX0_TID} +}; + +int marvell_get_iob_memory_map(struct addr_map_win **win, uint32_t *size, + uintptr_t base) +{ + switch (base) { + case MVEBU_CP_REGS_BASE(0): + *win = iob_memory_map_cp0; + *size = ARRAY_SIZE(iob_memory_map_cp0); + return 0; + case MVEBU_CP_REGS_BASE(1): + *win = iob_memory_map_cp1; + *size = ARRAY_SIZE(iob_memory_map_cp1); + return 0; + default: + *size = 0; + *win = 0; + return 1; + } +} +#endif + +/***************************************************************************** + * CCU Configuration + ***************************************************************************** + */ +struct addr_map_win ccu_memory_map[] = { +#ifdef IMAGE_BLE + {0x00000000f2000000, 0x4000000, IO_0_TID}, /* IO window */ +#else +#if LLC_SRAM + /* This entry is prepared for OP-TEE OS that enables the LLC SRAM + * and changes the window target to SRAM_TID. + */ + {PLAT_MARVELL_LLC_SRAM_BASE, PLAT_MARVELL_LLC_SRAM_SIZE, DRAM_0_TID}, +#endif + {0x00000000f2000000, 0xe000000, IO_0_TID}, /* IO window */ + {0x00000000c0000000, 0x30000000, IO_0_TID}, /* IO window */ + {0x0000000800000000, 0x100000000, IO_0_TID}, /* IO window */ +#endif +}; + +uint32_t marvell_get_ccu_gcr_target(int ap) +{ + return DRAM_0_TID; +} + +int marvell_get_ccu_memory_map(int ap, struct addr_map_win **win, + uint32_t *size) +{ + *win = ccu_memory_map; + *size = ARRAY_SIZE(ccu_memory_map); + + return 0; +} + +#ifndef IMAGE_BLE +/***************************************************************************** + * SoC PM configuration + ***************************************************************************** + */ +/* CP GPIO should be used and the GPIOs should be within same GPIO register */ +struct power_off_method pm_cfg = { + .type = PMIC_GPIO, + .cfg.gpio.pin_count = 1, + .cfg.gpio.info = {{0, 35} }, + .cfg.gpio.step_count = 7, + .cfg.gpio.seq = {1, 0, 1, 0, 1, 0, 1}, + .cfg.gpio.delay_ms = 10, +}; + +void *plat_marvell_get_pm_cfg(void) +{ + /* Return the PM configurations */ + return &pm_cfg; +} + +/* In reference to #ifndef IMAGE_BLE, this part is used for BLE only. */ +#else +/***************************************************************************** + * SKIP IMAGE Configuration + ***************************************************************************** + */ +#if PLAT_RECOVERY_IMAGE_ENABLE +struct skip_image skip_im = { + .detection_method = GPIO, + .info.gpio.num = 33, + .info.gpio.button_state = HIGH, + .info.test.cp_ap = CP, + .info.test.cp_index = 0, +}; + +void *plat_marvell_get_skip_image_data(void) +{ + /* Return the skip_image configurations */ + return &skip_im; +} +#endif +#endif diff --git a/plat/marvell/armada/a8k/a80x0/board/phy-porting-layer.h b/plat/marvell/armada/a8k/a80x0/board/phy-porting-layer.h new file mode 100644 index 0000000..afa3be1 --- /dev/null +++ b/plat/marvell/armada/a8k/a80x0/board/phy-porting-layer.h @@ -0,0 +1,192 @@ +/* + * Copyright (C) 2018 Marvell International Ltd. + * + * SPDX-License-Identifier: BSD-3-Clause + * https://spdx.org/licenses + */ + +#ifndef PHY_PORTING_LAYER_H +#define PHY_PORTING_LAYER_H + +#define MAX_LANE_NR 6 + +static const struct xfi_params + xfi_static_values_tab[AP_NUM][CP_NUM][MAX_LANE_NR] = { + /* AP0 */ + { + /* CP 0 */ + { + { 0 }, /* Comphy0 */ + { 0 }, /* Comphy1 */ + { .g1_ffe_res_sel = 0x3, .g1_ffe_cap_sel = 0xf, + .align90 = 0x5f, + .g1_dfe_res = 0x2, .g1_amp = 0x1c, .g1_emph = 0xe, + .g1_emph_en = 0x1, .g1_tx_amp_adj = 0x1, + .g1_tx_emph_en = 0x1, .g1_tx_emph = 0x0, + .g1_rx_selmuff = 0x1, .g1_rx_selmufi = 0x0, + .g1_rx_selmupf = 0x2, .g1_rx_selmupi = 0x2, + .valid = 0x1 }, /* Comphy2 */ + { 0 }, /* Comphy3 */ + { .g1_ffe_res_sel = 0x3, .g1_ffe_cap_sel = 0xf, + .align90 = 0x5f, + .g1_dfe_res = 0x2, .g1_amp = 0x1c, .g1_emph = 0xe, + .g1_emph_en = 0x1, .g1_tx_amp_adj = 0x1, + .g1_tx_emph_en = 0x1, .g1_tx_emph = 0x0, + .g1_rx_selmuff = 0x1, .g1_rx_selmufi = 0x0, + .g1_rx_selmupf = 0x2, .g1_rx_selmupi = 0x2, + .valid = 0x1 }, /* Comphy4 */ + { 0 }, /* Comphy5 */ + }, + + /* CP 1 */ + { + { 0 }, /* Comphy0 */ + { 0 }, /* Comphy1 */ + { .g1_ffe_res_sel = 0x3, .g1_ffe_cap_sel = 0xf, + .align90 = 0x5f, + .g1_dfe_res = 0x2, .g1_amp = 0x1c, .g1_emph = 0xe, + .g1_emph_en = 0x1, .g1_tx_amp_adj = 0x1, + .g1_tx_emph_en = 0x1, .g1_tx_emph = 0x0, + .g1_rx_selmuff = 0x1, .g1_rx_selmufi = 0x0, + .g1_rx_selmupf = 0x2, .g1_rx_selmupi = 0x2, + .valid = 0x1 }, /* Comphy2 */ + { 0 }, /* Comphy3 */ + { .g1_ffe_res_sel = 0x3, .g1_ffe_cap_sel = 0xf, + .align90 = 0x5f, + .g1_dfe_res = 0x2, .g1_amp = 0x1c, .g1_emph = 0xe, + .g1_emph_en = 0x1, .g1_tx_amp_adj = 0x1, + .g1_tx_emph_en = 0x1, .g1_tx_emph = 0x0, + .g1_rx_selmuff = 0x1, .g1_rx_selmufi = 0x0, + .g1_rx_selmupf = 0x2, .g1_rx_selmupi = 0x2, + .valid = 0x1 }, /* Comphy4 */ + { 0 }, /* Comphy5 */ + }, + }, +}; + +static const struct sata_params + sata_static_values_tab[AP_NUM][CP_NUM][MAX_LANE_NR] = { + /* AP0 */ + { + /* CP 0 */ + { + { 0 }, /* Comphy0 */ + { .g1_amp = 0x8, .g2_amp = 0xa, .g3_amp = 0x1e, + .g1_emph = 0x1, .g2_emph = 0x2, .g3_emph = 0xe, + .g1_emph_en = 0x1, .g2_emph_en = 0x1, + .g3_emph_en = 0x1, + .g1_tx_amp_adj = 0x1, .g2_tx_amp_adj = 0x1, + .g3_tx_amp_adj = 0x1, + .g1_tx_emph_en = 0x0, .g2_tx_emph_en = 0x0, + .g3_tx_emph_en = 0x0, + .g1_tx_emph = 0x1, .g2_tx_emph = 0x1, + .g3_tx_emph = 0x1, + .g3_dfe_res = 0x1, .g3_ffe_res_sel = 0x4, + .g3_ffe_cap_sel = 0xf, + .align90 = 0x61, + .g1_rx_selmuff = 0x3, .g2_rx_selmuff = 0x3, + .g3_rx_selmuff = 0x3, + .g1_rx_selmufi = 0x0, .g2_rx_selmufi = 0x0, + .g3_rx_selmufi = 0x3, + .g1_rx_selmupf = 0x1, .g2_rx_selmupf = 0x1, + .g3_rx_selmupf = 0x2, + .g1_rx_selmupi = 0x0, .g2_rx_selmupi = 0x0, + .g3_rx_selmupi = 0x2, + .polarity_invert = COMPHY_POLARITY_NO_INVERT, + .valid = 0x1 + }, /* Comphy1 */ + { 0 }, /* Comphy2 */ + { .g1_amp = 0x8, .g2_amp = 0xa, .g3_amp = 0x1e, + .g1_emph = 0x1, .g2_emph = 0x2, .g3_emph = 0xe, + .g1_emph_en = 0x1, .g2_emph_en = 0x1, + .g3_emph_en = 0x1, + .g1_tx_amp_adj = 0x1, .g2_tx_amp_adj = 0x1, + .g3_tx_amp_adj = 0x1, + .g1_tx_emph_en = 0x0, .g2_tx_emph_en = 0x0, + .g3_tx_emph_en = 0x0, + .g1_tx_emph = 0x1, .g2_tx_emph = 0x1, + .g3_tx_emph = 0x1, + .g3_dfe_res = 0x1, .g3_ffe_res_sel = 0x4, + .g3_ffe_cap_sel = 0xf, + .align90 = 0x61, + .g1_rx_selmuff = 0x3, .g2_rx_selmuff = 0x3, + .g3_rx_selmuff = 0x3, + .g1_rx_selmufi = 0x0, .g2_rx_selmufi = 0x0, + .g3_rx_selmufi = 0x3, + .g1_rx_selmupf = 0x1, .g2_rx_selmupf = 0x1, + .g3_rx_selmupf = 0x2, + .g1_rx_selmupi = 0x0, .g2_rx_selmupi = 0x0, + .g3_rx_selmupi = 0x2, + .polarity_invert = COMPHY_POLARITY_NO_INVERT, + .valid = 0x1 + }, /* Comphy3 */ + { 0 }, /* Comphy4 */ + { 0 }, /* Comphy5 */ + }, + + /* CP 1 */ + { + { 0 }, /* Comphy0 */ + { .g1_amp = 0x8, .g2_amp = 0xa, .g3_amp = 0x1e, + .g1_emph = 0x1, .g2_emph = 0x2, .g3_emph = 0xe, + .g1_emph_en = 0x1, .g2_emph_en = 0x1, + .g3_emph_en = 0x1, + .g1_tx_amp_adj = 0x1, .g2_tx_amp_adj = 0x1, + .g3_tx_amp_adj = 0x1, + .g1_tx_emph_en = 0x0, .g2_tx_emph_en = 0x0, + .g3_tx_emph_en = 0x0, + .g1_tx_emph = 0x1, .g2_tx_emph = 0x1, + .g3_tx_emph = 0x1, + .g3_dfe_res = 0x1, .g3_ffe_res_sel = 0x4, + .g3_ffe_cap_sel = 0xf, + .align90 = 0x61, + .g1_rx_selmuff = 0x3, .g2_rx_selmuff = 0x3, + .g3_rx_selmuff = 0x3, + .g1_rx_selmufi = 0x0, .g2_rx_selmufi = 0x0, + .g3_rx_selmufi = 0x3, + .g1_rx_selmupf = 0x1, .g2_rx_selmupf = 0x1, + .g3_rx_selmupf = 0x2, + .g1_rx_selmupi = 0x0, .g2_rx_selmupi = 0x0, + .g3_rx_selmupi = 0x2, + .polarity_invert = COMPHY_POLARITY_NO_INVERT, + .valid = 0x1 + }, /* Comphy1 */ + { 0 }, /* Comphy2 */ + { .g1_amp = 0x8, .g2_amp = 0xa, .g3_amp = 0x1e, + .g1_emph = 0x1, .g2_emph = 0x2, .g3_emph = 0xe, + .g1_emph_en = 0x1, .g2_emph_en = 0x1, + .g3_emph_en = 0x1, + .g1_tx_amp_adj = 0x1, .g2_tx_amp_adj = 0x1, + .g3_tx_amp_adj = 0x1, + .g1_tx_emph_en = 0x0, .g2_tx_emph_en = 0x0, + .g3_tx_emph_en = 0x0, + .g1_tx_emph = 0x1, .g2_tx_emph = 0x1, + .g3_tx_emph = 0x1, + .g3_dfe_res = 0x1, .g3_ffe_res_sel = 0x4, + .g3_ffe_cap_sel = 0xf, + .align90 = 0x61, + .g1_rx_selmuff = 0x3, .g2_rx_selmuff = 0x3, + .g3_rx_selmuff = 0x3, + .g1_rx_selmufi = 0x0, .g2_rx_selmufi = 0x0, + .g3_rx_selmufi = 0x3, + .g1_rx_selmupf = 0x1, .g2_rx_selmupf = 0x1, + .g3_rx_selmupf = 0x2, + .g1_rx_selmupi = 0x0, .g2_rx_selmupi = 0x0, + .g3_rx_selmupi = 0x2, + .polarity_invert = COMPHY_POLARITY_NO_INVERT, + .valid = 0x1 + }, /* Comphy3 */ + { 0 }, /* Comphy4 */ + { 0 }, /* Comphy5 */ + + }, + }, +}; + +static const struct usb_params + usb_static_values_tab[AP_NUM][CP_NUM][MAX_LANE_NR] = { + [0 ... AP_NUM-1][0 ... CP_NUM-1][0 ... MAX_LANE_NR-1] = { + .polarity_invert = COMPHY_POLARITY_NO_INVERT + }, +}; +#endif /* PHY_PORTING_LAYER_H */ diff --git a/plat/marvell/armada/a8k/a80x0/mvebu_def.h b/plat/marvell/armada/a8k/a80x0/mvebu_def.h new file mode 100644 index 0000000..3fa119a --- /dev/null +++ b/plat/marvell/armada/a8k/a80x0/mvebu_def.h @@ -0,0 +1,17 @@ +/* + * Copyright (C) 2018 Marvell International Ltd. + * + * SPDX-License-Identifier: BSD-3-Clause + * https://spdx.org/licenses + */ + +#ifndef MVEBU_DEF_H +#define MVEBU_DEF_H + +#include + +#define CP_COUNT 2 /* A80x0 has both CP0 & CP1 */ +#define I2C_SPD_ADDR 0x53 /* Access SPD data */ +#define I2C_SPD_P0_ADDR 0x36 /* Select SPD data page 0 */ + +#endif /* MVEBU_DEF_H */ diff --git a/plat/marvell/armada/a8k/a80x0/platform.mk b/plat/marvell/armada/a8k/a80x0/platform.mk new file mode 100644 index 0000000..115dd4a --- /dev/null +++ b/plat/marvell/armada/a8k/a80x0/platform.mk @@ -0,0 +1,20 @@ +# +# Copyright (C) 2018 Marvell International Ltd. +# +# SPDX-License-Identifier: BSD-3-Clause +# https://spdx.org/licenses +# + +PCI_EP_SUPPORT := 0 + +CP_NUM := 2 +$(eval $(call add_define,CP_NUM)) + +DOIMAGE_SEC := tools/doimage/secure/sec_img_8K.cfg + +MARVELL_MOCHI_DRV := drivers/marvell/mochi/apn806_setup.c + +BOARD_DIR := $(shell dirname $(lastword $(MAKEFILE_LIST))) +include plat/marvell/armada/a8k/common/a8k_common.mk + +include plat/marvell/armada/common/marvell_common.mk -- cgit v1.2.3