From 102b0d2daa97dae68d3eed54d8fe37a9cc38a892 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 28 Apr 2024 11:13:47 +0200 Subject: Adding upstream version 2.8.0+dfsg. Signed-off-by: Daniel Baumann --- plat/mediatek/mt8173/bl31_plat_setup.c | 146 +++++++++++++++++++++++++++++++++ 1 file changed, 146 insertions(+) create mode 100644 plat/mediatek/mt8173/bl31_plat_setup.c (limited to 'plat/mediatek/mt8173/bl31_plat_setup.c') diff --git a/plat/mediatek/mt8173/bl31_plat_setup.c b/plat/mediatek/mt8173/bl31_plat_setup.c new file mode 100644 index 0000000..bd7d0b0 --- /dev/null +++ b/plat/mediatek/mt8173/bl31_plat_setup.c @@ -0,0 +1,146 @@ +/* + * Copyright (c) 2013-2019, ARM Limited and Contributors. All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +static entry_point_info_t bl32_ep_info; +static entry_point_info_t bl33_ep_info; + +static void platform_setup_cpu(void) +{ + /* turn off all the little core's power except cpu 0 */ + mtcmos_little_cpu_off(); + + /* setup big cores */ + mmio_write_32((uintptr_t)&mt8173_mcucfg->mp1_config_res, + MP1_DIS_RGU0_WAIT_PD_CPUS_L1_ACK | + MP1_DIS_RGU1_WAIT_PD_CPUS_L1_ACK | + MP1_DIS_RGU2_WAIT_PD_CPUS_L1_ACK | + MP1_DIS_RGU3_WAIT_PD_CPUS_L1_ACK | + MP1_DIS_RGU_NOCPU_WAIT_PD_CPUS_L1_ACK); + mmio_setbits_32((uintptr_t)&mt8173_mcucfg->mp1_miscdbg, MP1_AINACTS); + mmio_setbits_32((uintptr_t)&mt8173_mcucfg->mp1_clkenm_div, + MP1_SW_CG_GEN); + mmio_clrbits_32((uintptr_t)&mt8173_mcucfg->mp1_rst_ctl, + MP1_L2RSTDISABLE); + + /* set big cores arm64 boot mode */ + mmio_setbits_32((uintptr_t)&mt8173_mcucfg->mp1_cpucfg, + MP1_CPUCFG_64BIT); + + /* set LITTLE cores arm64 boot mode */ + mmio_setbits_32((uintptr_t)&mt8173_mcucfg->mp0_rv_addr[0].rv_addr_hw, + MP0_CPUCFG_64BIT); + + /* enable dcm control */ + mmio_setbits_32((uintptr_t)&mt8173_mcucfg->bus_fabric_dcm_ctrl, + ADB400_GRP_DCM_EN | CCI400_GRP_DCM_EN | ADBCLK_GRP_DCM_EN | + EMICLK_GRP_DCM_EN | ACLK_GRP_DCM_EN | L2C_IDLE_DCM_EN | + INFRACLK_PSYS_DYNAMIC_CG_EN); + mmio_setbits_32((uintptr_t)&mt8173_mcucfg->l2c_sram_ctrl, + L2C_SRAM_DCM_EN); + mmio_setbits_32((uintptr_t)&mt8173_mcucfg->cci_clk_ctrl, + MCU_BUS_DCM_EN); +} + +static void platform_setup_sram(void) +{ + /* protect BL31 memory from non-secure read/write access */ + mmio_write_32(SRAMROM_SEC_ADDR, (uint32_t)(BL31_END + 0x3ff) & 0x3fc00); + mmio_write_32(SRAMROM_SEC_CTRL, 0x10000ff9); +} + +/******************************************************************************* + * Return a pointer to the 'entry_point_info' structure of the next image for + * the security state specified. BL33 corresponds to the non-secure image type + * while BL32 corresponds to the secure image type. A NULL pointer is returned + * if the image does not exist. + ******************************************************************************/ +entry_point_info_t *bl31_plat_get_next_image_ep_info(uint32_t type) +{ + entry_point_info_t *next_image_info; + + next_image_info = (type == NON_SECURE) ? &bl33_ep_info : &bl32_ep_info; + assert(next_image_info->h.type == PARAM_EP); + + /* None of the images on this platform can have 0x0 as the entrypoint */ + if (next_image_info->pc) + return next_image_info; + else + return NULL; +} + +/******************************************************************************* + * Perform any BL3-1 early platform setup. Here is an opportunity to copy + * parameters passed by the calling EL (S-EL1 in BL2 & EL3 in BL1) before they + * are lost (potentially). This needs to be done before the MMU is initialized + * so that the memory layout can be used while creating page tables. + * BL2 has flushed this information to memory, so we are guaranteed to pick up + * good data. + ******************************************************************************/ +void bl31_early_platform_setup2(u_register_t arg0, u_register_t arg1, + u_register_t arg2, u_register_t arg3) +{ + static console_t console; + + console_16550_register(MT8173_UART0_BASE, MT8173_UART_CLOCK, MT8173_BAUDRATE, &console); + + VERBOSE("bl31_setup\n"); + + bl31_params_parse_helper(arg0, &bl32_ep_info, &bl33_ep_info); +} + +/******************************************************************************* + * Perform any BL3-1 platform setup code + ******************************************************************************/ +void bl31_platform_setup(void) +{ + platform_setup_cpu(); + platform_setup_sram(); + + generic_delay_timer_init(); + + /* Initialize the gic cpu and distributor interfaces */ + plat_arm_gic_driver_init(); + plat_arm_gic_init(); + + /* Initialize spm at boot time */ + spm_boot_init(); +} + +/******************************************************************************* + * Perform the very early platform specific architectural setup here. At the + * moment this is only intializes the mmu in a quick and dirty way. + ******************************************************************************/ +void bl31_plat_arch_setup(void) +{ + plat_cci_init(); + plat_cci_enable(); + + plat_configure_mmu_el3(BL_CODE_BASE, + BL_COHERENT_RAM_END - BL_CODE_BASE, + BL_CODE_BASE, + BL_CODE_END, + BL_COHERENT_RAM_BASE, + BL_COHERENT_RAM_END); +} + -- cgit v1.2.3