From 102b0d2daa97dae68d3eed54d8fe37a9cc38a892 Mon Sep 17 00:00:00 2001
From: Daniel Baumann <daniel.baumann@progress-linux.org>
Date: Sun, 28 Apr 2024 11:13:47 +0200
Subject: Adding upstream version 2.8.0+dfsg.

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
---
 .../nxp/common/plat_make_helper/plat_common_def.mk | 103 +++++++++++++++++++++
 1 file changed, 103 insertions(+)
 create mode 100644 plat/nxp/common/plat_make_helper/plat_common_def.mk

(limited to 'plat/nxp/common/plat_make_helper/plat_common_def.mk')

diff --git a/plat/nxp/common/plat_make_helper/plat_common_def.mk b/plat/nxp/common/plat_make_helper/plat_common_def.mk
new file mode 100644
index 0000000..86dacf8
--- /dev/null
+++ b/plat/nxp/common/plat_make_helper/plat_common_def.mk
@@ -0,0 +1,103 @@
+# Copyright 2020-2021 NXP
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+# Include build macros, for example: SET_NXP_MAKE_FLAG
+include plat/nxp/common/plat_make_helper/plat_build_macros.mk
+
+# Adding platform specific defines
+
+$(eval $(call add_define_val,BOARD,'"${BOARD}"'))
+
+ifeq (${POVDD_ENABLE},yes)
+$(eval $(call add_define,CONFIG_POVDD_ENABLE))
+endif
+
+ifneq (${FLASH_TYPE},)
+$(eval $(call add_define,CONFIG_${FLASH_TYPE}))
+endif
+
+ifneq (${XSPI_FLASH_SZ},)
+$(eval $(call add_define_val,NXP_FLEXSPI_FLASH_SIZE,${XSPI_FLASH_SZ}))
+endif
+
+ifneq (${QSPI_FLASH_SZ},)
+$(eval $(call add_define_val,NXP_QSPI_FLASH_SIZE,${QSPI_FLASH_SZ}))
+endif
+
+ifneq (${NOR_FLASH_SZ},)
+$(eval $(call add_define_val,NXP_NOR_FLASH_SIZE,${NOR_FLASH_SZ}))
+endif
+
+
+ifneq (${FSPI_ERASE_4K},)
+$(eval $(call add_define_val,CONFIG_FSPI_ERASE_4K,${FSPI_ERASE_4K}))
+endif
+
+ifneq (${NUM_OF_DDRC},)
+$(eval $(call add_define_val,NUM_OF_DDRC,${NUM_OF_DDRC}))
+endif
+
+ifeq (${CONFIG_DDR_NODIMM},1)
+$(eval $(call add_define,CONFIG_DDR_NODIMM))
+DDRC_NUM_DIMM := 1
+endif
+
+ifneq (${DDRC_NUM_DIMM},)
+$(eval $(call add_define_val,DDRC_NUM_DIMM,${DDRC_NUM_DIMM}))
+endif
+
+ifneq (${DDRC_NUM_CS},)
+$(eval $(call add_define_val,DDRC_NUM_CS,${DDRC_NUM_CS}))
+endif
+
+ifeq (${DDR_ADDR_DEC},yes)
+$(eval $(call add_define,CONFIG_DDR_ADDR_DEC))
+endif
+
+ifeq (${DDR_ECC_EN},yes)
+$(eval $(call add_define,CONFIG_DDR_ECC_EN))
+endif
+
+ifeq (${CONFIG_STATIC_DDR},1)
+$(eval $(call add_define,CONFIG_STATIC_DDR))
+endif
+
+# Platform can control the base address for non-volatile storage.
+#$(eval $(call add_define_val,NV_STORAGE_BASE_ADDR,'${BL2_BIN_XSPI_NOR_END_ADDRESS} - 2 * ${NXP_XSPI_NOR_UNIT_SIZE}'))
+
+ifeq (${WARM_BOOT},yes)
+$(eval $(call add_define_val,PHY_TRAINING_REGS_ON_FLASH,'${BL2_BIN_XSPI_NOR_END_ADDRESS} - ${NXP_XSPI_NOR_UNIT_SIZE}'))
+endif
+
+# Selecting Boot Source for the TFA images.
+define add_boot_mode_define
+    ifeq ($(1),qspi)
+        $$(eval $$(call SET_NXP_MAKE_FLAG,QSPI_NEEDED,BL2))
+        $$(eval $$(call add_define,QSPI_BOOT))
+    else ifeq ($(1),sd)
+        $$(eval $$(call SET_NXP_MAKE_FLAG,SD_MMC_NEEDED,BL2))
+        $$(eval $$(call add_define,SD_BOOT))
+    else ifeq ($(1),emmc)
+        $$(eval $$(call SET_NXP_MAKE_FLAG,SD_MMC_NEEDED,BL2))
+        $$(eval $$(call add_define,EMMC_BOOT))
+    else ifeq ($(1),nor)
+        $$(eval $$(call SET_NXP_MAKE_FLAG,IFC_NOR_NEEDED,BL2))
+        $$(eval $$(call add_define,NOR_BOOT))
+    else ifeq ($(1),nand)
+        $$(eval $$(call SET_NXP_MAKE_FLAG,IFC_NAND_NEEDED,BL2))
+        $$(eval $$(call add_define,NAND_BOOT))
+    else ifeq ($(1),flexspi_nor)
+        $$(eval $$(call SET_NXP_MAKE_FLAG,XSPI_NEEDED,BL2))
+        $$(eval $$(call add_define,FLEXSPI_NOR_BOOT))
+    else
+        $$(error $(PLAT) Cannot Support Boot Mode: $(BOOT_MODE))
+    endif
+endef
+
+ifneq (,$(findstring $(BOOT_MODE),$(SUPPORTED_BOOT_MODE)))
+    $(eval $(call add_boot_mode_define,$(strip $(BOOT_MODE))))
+else
+    $(error $(PLAT) Un-supported Boot Mode = $(BOOT_MODE))
+endif
-- 
cgit v1.2.3