From 102b0d2daa97dae68d3eed54d8fe37a9cc38a892 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 28 Apr 2024 11:13:47 +0200 Subject: Adding upstream version 2.8.0+dfsg. Signed-off-by: Daniel Baumann --- plat/ti/k3/board/generic/include/board_def.h | 43 ++++++++++++++++++++++++++++ 1 file changed, 43 insertions(+) create mode 100644 plat/ti/k3/board/generic/include/board_def.h (limited to 'plat/ti/k3/board/generic/include') diff --git a/plat/ti/k3/board/generic/include/board_def.h b/plat/ti/k3/board/generic/include/board_def.h new file mode 100644 index 0000000..4ff687c --- /dev/null +++ b/plat/ti/k3/board/generic/include/board_def.h @@ -0,0 +1,43 @@ +/* + * Copyright (c) 2017-2019, ARM Limited and Contributors. All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#ifndef BOARD_DEF_H +#define BOARD_DEF_H + +#include + +/* The ports must be in order and contiguous */ +#define K3_CLUSTER0_CORE_COUNT U(2) +#define K3_CLUSTER1_CORE_COUNT U(2) +#define K3_CLUSTER2_CORE_COUNT U(2) +#define K3_CLUSTER3_CORE_COUNT U(2) + +/* + * This RAM will be used for the bootloader including code, bss, and stacks. + * It may need to be increased if BL31 grows in size. + * + * The link addresses are determined by SEC_SRAM_BASE + offset. + * When ENABLE_PIE is set, the TF images can be loaded anywhere, so + * SEC_SRAM_BASE is really arbitrary. + * + * When ENABLE_PIE is unset, SEC_SRAM_BASE should be chosen so that + * it matches to the physical address where BL31 is loaded, that is, + * SEC_SRAM_BASE should be the base address of the RAM region. + * + * Lets make things explicit by mapping SRAM_BASE to 0x0 since ENABLE_PIE is + * defined as default for our platform. + */ +#define SEC_SRAM_BASE UL(0x00000000) /* PIE remapped on fly */ +#define SEC_SRAM_SIZE UL(0x00020000) /* 128k */ + +#define PLAT_MAX_OFF_STATE U(2) +#define PLAT_MAX_RET_STATE U(1) + +#define PLAT_PROC_START_ID U(32) +#define PLAT_PROC_DEVICE_START_ID U(202) +#define PLAT_CLUSTER_DEVICE_START_ID U(198) + +#endif /* BOARD_DEF_H */ -- cgit v1.2.3