diff options
Diffstat (limited to '')
| -rw-r--r-- | doc/chrony.conf.man.in | 4894 |
1 files changed, 4894 insertions, 0 deletions
diff --git a/doc/chrony.conf.man.in b/doc/chrony.conf.man.in new file mode 100644 index 0000000..1a51b24 --- /dev/null +++ b/doc/chrony.conf.man.in @@ -0,0 +1,4894 @@ +'\" t +.\" Title: chrony.conf +.\" Author: [see the "AUTHOR(S)" section] +.\" Generator: Asciidoctor 2.0.15 +.\" Date: 2022-08-29 +.\" Manual: Configuration Files +.\" Source: chrony @CHRONY_VERSION@ +.\" Language: English +.\" +.TH "CHRONY.CONF" "5" "2022-08-29" "chrony @CHRONY_VERSION@" "Configuration Files" +.ie \n(.g .ds Aq \(aq +.el .ds Aq ' +.ss \n[.ss] 0 +.nh +.ad l +.de URL +\fI\\$2\fP <\\$1>\\$3 +.. +.als MTO URL +.if \n[.g] \{\ +. mso www.tmac +. am URL +. ad l +. . +. am MTO +. ad l +. . +. LINKSTYLE blue R < > +.\} +.SH "NAME" +chrony.conf \- chronyd configuration file +.SH "SYNOPSIS" +.sp +\fBchrony.conf\fP +.SH "DESCRIPTION" +.sp +This file configures the \fBchronyd\fP daemon. The compiled\-in location is +\fI@SYSCONFDIR@/chrony.conf\fP. Other locations can be specified on the +\fBchronyd\fP command line with the \fB\-f\fP option. +.sp +Each directive in the configuration file is placed on a separate line. The +following sections describe each of the directives in turn. The directives are +not case\-sensitive. Generally, the directives can occur in any order in the file +and if a directive is specified multiple times, only the last one will be +effective. Exceptions are noted in the descriptions. +.sp +The configuration directives can also be specified directly on the \fBchronyd\fP +command line. In this case each argument is parsed as a new line and the +configuration file is ignored. +.sp +While the number of supported directives is large, only a few of them are +typically needed. See the \fBEXAMPLES\fP section for configuration in +typical operating scenarios. +.sp +The configuration file might contain comment lines. A comment line is any line +that starts with zero or more spaces followed by any one of the following +characters: \fB!\fP, \fB;\fP, \fB#\fP, \fB%\fP. Any line with this format will be ignored. +.SH "DIRECTIVES" +.SS "Time sources" +.sp +\fBserver\fP \fIhostname\fP [\fIoption\fP]... +.RS 4 +The \fBserver\fP directive specifies an NTP server which can be used as a time +source. The client\-server relationship is strictly hierarchical: a client might +synchronise its system time to that of the server, but the server\(cqs system time +will never be influenced by that of a client. +.sp +The server can be specified by its hostname or IP address. If the hostname cannot +be resolved on start, \fBchronyd\fP will try it again in increasing intervals, and +also when the \fBonline\fP command is issued in \fBchronyc\fP. +.sp +The DNS record can change over time. The used address will be replaced with a +newly resolved address when the server becomes unreachable (i.e. no valid +response to last 8 requests), unsynchronised, a falseticker (i.e. does not +agree with a majority of other sources), or the root distance is too large (the +limit can be configured by the \fBmaxdistance\fP directive). The +automatic replacement happens at most once per 30 minutes. It can also be +triggered manually for all sources by the \fBrefresh\fP +command in \fBchronyc\fP. +.sp +This directive can be used multiple times to specify multiple servers. +.sp +The directive supports the following options: +.sp +\fBminpoll\fP \fIpoll\fP +.RS 4 +This option specifies the minimum interval between requests sent to the server +as a power of 2 in seconds. For example, \fBminpoll 5\fP would mean that the +polling interval should not drop below 32 seconds. The default is 6 (64 +seconds), the minimum is \-7 (1/128th of a second), and the maximum is 24 (6 +months). Note that intervals shorter than 6 (64 seconds) should generally not +be used with public servers on the Internet, because it might be considered +abuse. A sub\-second interval will be enabled only when the server is reachable +and the round\-trip delay is shorter than 10 milliseconds, i.e. the server +should be in a local network. +.RE +.sp +\fBmaxpoll\fP \fIpoll\fP +.RS 4 +This option specifies the maximum interval between requests sent to the server +as a power of 2 in seconds. For example, \fBmaxpoll 9\fP indicates that the polling +interval should stay at or below 9 (512 seconds). The default is 10 (1024 +seconds), the minimum is \-7 (1/128th of a second), and the maximum is 24 (6 +months). +.RE +.sp +\fBiburst\fP +.RS 4 +With this option, \fBchronyd\fP will start with a burst of 4\-8 requests in order to +make the first update of the clock sooner. It will also repeat the burst every +time the source is switched from the offline state to online with the +\fBonline\fP command in \fBchronyc\fP. +.RE +.sp +\fBburst\fP +.RS 4 +With this option, \fBchronyd\fP will send a burst of up to 4 requests when it +cannot get a good measurement from the +server. The number of requests in the burst is limited by the current polling +interval to keep the average interval at or above the minimum interval, i.e. +the current interval needs to be at least two times longer than the minimum +interval in order to allow a burst with two requests. +.RE +.sp +\fBkey\fP \fIID\fP +.RS 4 +The NTP protocol supports a message authentication code (MAC) to prevent +computers having their system time upset by rogue packets being sent to them. +The MAC is generated as a function of a key specified in the key file, +which is specified by the \fBkeyfile\fP directive. +.sp +The \fBkey\fP option specifies which key (with an ID in the range 1 through 2^32\-1) +should \fBchronyd\fP use to authenticate requests sent to the server and verify its +responses. The server must have the same key for this number configured, +otherwise no relationship between the computers will be possible. +.sp +If the server is running \fBntpd\fP and the output size of the hash function used +by the key is longer than 160 bits (e.g. SHA256), the \fBversion\fP option needs to +be set to 4 for compatibility. +.RE +.sp +\fBnts\fP +.RS 4 +This option enables authentication using the Network Time Security (NTS) +mechanism. Unlike with the \fBkey\fP option, the server and client do not need to +share a key in a key file. NTS has a Key Establishment (NTS\-KE) protocol using +the Transport Layer Security (TLS) protocol to get the keys and cookies +required by NTS for authentication of NTP packets. +.RE +.sp +\fBcertset\fP \fIID\fP +.RS 4 +This option specifies which set of trusted certificates should be used to verify +the server\(cqs certificate when the \fBnts\fP option is enabled. Sets of certificates +can be specified with the \fBntstrustedcerts\fP directive. The +default set is 0, which by default contains certificates of the system\(cqs +default trusted certificate authorities. +.RE +.sp +\fBmaxdelay\fP \fIdelay\fP +.RS 4 +\fBchronyd\fP uses the network round\-trip delay to the server to determine how +accurate a particular measurement is likely to be. Long round\-trip delays +indicate that the request, or the response, or both were delayed. If only one +of the messages was delayed the measurement error is likely to be substantial. +.sp +For small variations in the round\-trip delay, \fBchronyd\fP uses a weighting scheme +when processing the measurements. However, beyond a certain level of delay the +measurements are likely to be so corrupted as to be useless. (This is +particularly so on wireless networks and other slow links, where a long delay +probably indicates a highly asymmetric delay caused by the response waiting +behind a lot of packets related to a download of some sort). +.sp +If the user knows that round trip delays above a certain level should cause the +measurement to be ignored, this level can be defined with the \fBmaxdelay\fP +option. For example, \fBmaxdelay 0.3\fP would indicate that measurements with a +round\-trip delay greater than 0.3 seconds should be ignored. The default value +is 3 seconds and the maximum value is 1000 seconds. +.RE +.sp +\fBmaxdelayratio\fP \fIratio\fP +.RS 4 +This option is similar to the \fBmaxdelay\fP option above. \fBchronyd\fP keeps a record +of the minimum round\-trip delay amongst the previous measurements that it has +buffered. If a measurement has a round\-trip delay that is greater than the +specified ratio times the minimum delay, it will be rejected. By default, this +test is disabled. +.RE +.sp +\fBmaxdelaydevratio\fP \fIratio\fP +.RS 4 +If a measurement has a ratio of the increase in the round\-trip delay from the +minimum delay amongst the previous measurements to the standard deviation of +the previous measurements that is greater than the specified ratio, it will be +rejected. The default is 10.0. +.RE +.sp +\fBmaxdelayquant\fP \fIp\fP +.RS 4 +This option disables the \fBmaxdelaydevratio\fP test and specifies the maximum +acceptable delay as a quantile of the round\-trip delay instead of a function of +the minimum delay amongst the buffered measurements. If a measurement has a +round\-trip delay that is greater than a long\-term estimate of the \fIp\fP\-quantile, +it will be rejected. +.sp +The specified \fIp\fP value should be between 0.05 and 0.95. For example, +\fBmaxdelayquant 0.2\fP would indicate that only measurements with the lowest 20 +percent of round\-trip delays should be accepted. Note that it can take many +measurements for the estimated quantile to reach the expected value. This +option is intended for synchronisation in mostly static local networks with +very short polling intervals and possibly combined with the \fBfilter\fP option. +By default, this test is disabled in favour of the \fBmaxdelaydevratio\fP test. +.RE +.sp +\fBmindelay\fP \fIdelay\fP +.RS 4 +This option specifies a fixed minimum round\-trip delay to be used instead of +the minimum amongst the previous measurements. This can be useful in networks +with static configuration to improve the stability of corrections for +asymmetric jitter, weighting of the measurements, and the \fBmaxdelayratio\fP and +\fBmaxdelaydevratio\fP tests. The value should be set accurately in order to have a +positive effect on the synchronisation. +.RE +.sp +\fBasymmetry\fP \fIratio\fP +.RS 4 +This option specifies the asymmetry of the network jitter on the path to the +source, which is used to correct the measured offset according to the delay. +The asymmetry can be between \-0.5 and +0.5. A negative value means the delay of +packets sent to the source is more variable than the delay of packets sent from +the source back. By default, \fBchronyd\fP estimates the asymmetry automatically. +.RE +.sp +\fBoffset\fP \fIoffset\fP +.RS 4 +This option specifies a correction (in seconds) which will be applied to +offsets measured with this source. It\(cqs particularly useful to compensate for a +known asymmetry in network delay or timestamping errors. For example, if +packets sent to the source were on average delayed by 100 microseconds more +than packets sent from the source back, the correction would be \-0.00005 (\-50 +microseconds). The default is 0.0. +.RE +.sp +\fBminsamples\fP \fIsamples\fP +.RS 4 +Set the minimum number of samples kept for this source. This overrides the +\fBminsamples\fP directive. +.RE +.sp +\fBmaxsamples\fP \fIsamples\fP +.RS 4 +Set the maximum number of samples kept for this source. This overrides the +\fBmaxsamples\fP directive. +.RE +.sp +\fBfilter\fP \fIpolls\fP +.RS 4 +This option enables a median filter to reduce noise in NTP measurements. The +filter will process samples collected in the specified number of polls +into a single sample. It is intended to be used with very short polling +intervals in local networks where it is acceptable to generate a lot of NTP +traffic. +.RE +.sp +\fBoffline\fP +.RS 4 +If the server will not be reachable when \fBchronyd\fP is started, the \fBoffline\fP +option can be specified. \fBchronyd\fP will not try to poll the server until it is +enabled to do so (by using the \fBonline\fP command in +\fBchronyc\fP). +.RE +.sp +\fBauto_offline\fP +.RS 4 +With this option, the server will be assumed to have gone offline when sending +a request fails, e.g. due to a missing route to the network. This option avoids +the need to run the \fBoffline\fP command from \fBchronyc\fP +when disconnecting the network link. (It will still be necessary to use the +\fBonline\fP command when the link has been established, to +enable measurements to start.) +.RE +.sp +\fBprefer\fP +.RS 4 +Prefer this source over sources without the \fBprefer\fP option. +.RE +.sp +\fBnoselect\fP +.RS 4 +Never select this source. This is particularly useful for monitoring. +.RE +.sp +\fBtrust\fP +.RS 4 +Assume time from this source is always true. It can be rejected as a +falseticker in the source selection only if another source with this option +does not agree with it. +.RE +.sp +\fBrequire\fP +.RS 4 +Require that at least one of the sources specified with this option is +selectable (i.e. recently reachable and not a falseticker) before updating the +clock. Together with the \fBtrust\fP option this might be useful to allow a trusted +authenticated source to be safely combined with unauthenticated sources in +order to improve the accuracy of the clock. They can be selected and used for +synchronisation only if they agree with the trusted and required source. +.RE +.sp +\fBxleave\fP +.RS 4 +This option enables the interleaved mode of NTP. It enables the server to +respond with more accurate transmit timestamps (e.g. kernel or hardware +timestamps), which cannot be contained in the transmitted packet itself and +need to refer to a previous packet instead. This can significantly improve the +accuracy and stability of the measurements. +.sp +The interleaved mode is compatible with servers that support only the basic +mode. Note that even +servers that support the interleaved mode might respond in the basic mode as +the interleaved mode requires the servers to keep some state for each client +and the state might be dropped when there are too many clients (e.g. +\fBclientloglimit\fP is too small), or it might be overwritten +by other clients that have the same IP address (e.g. computers behind NAT or +someone sending requests with a spoofed source address). +.sp +The \fBxleave\fP option can be combined with the \fBpresend\fP option in order to +shorten the interval in which the server has to keep the state to be able to +respond in the interleaved mode. +.RE +.sp +\fBpolltarget\fP \fItarget\fP +.RS 4 +Target number of measurements to use for the regression algorithm which +\fBchronyd\fP will try to maintain by adjusting the polling interval between +\fBminpoll\fP and \fBmaxpoll\fP. A higher target makes \fBchronyd\fP prefer shorter polling +intervals. The default is 8 and a useful range is from 6 to 60. +.RE +.sp +\fBport\fP \fIport\fP +.RS 4 +This option allows the UDP port on which the server understands NTP requests to +be specified. For normal servers this option should not be required (the +default is 123, the standard NTP port). +.RE +.sp +\fBntsport\fP \fIport\fP +.RS 4 +This option specifies the TCP port on which the server is listening for NTS\-KE +connections when the \fBnts\fP option is enabled. The default is 4460. +.RE +.sp +\fBpresend\fP \fIpoll\fP +.RS 4 +If the timing measurements being made by \fBchronyd\fP are the only network data +passing between two computers, you might find that some measurements are badly +skewed due to either the client or the server having to do an ARP lookup on the +other party prior to transmitting a packet. This is more of a problem with long +sampling intervals, which might be similar in duration to the lifetime of entries +in the ARP caches of the machines. +.sp +In order to avoid this problem, the \fBpresend\fP option can be used. It takes a +single integer argument, which is the smallest polling interval for which an +extra pair of NTP packets will be exchanged between the client and the server +prior to the actual measurement. For example, with the following option +included in a \fBserver\fP directive: +.sp +.if n .RS 4 +.nf +.fam C +presend 9 +.fam +.fi +.if n .RE +.sp +when the polling interval is 512 seconds or more, an extra NTP client packet +will be sent to the server a short time (2 seconds) before making the actual +measurement. +.sp +If the \fBpresend\fP option is used together with the \fBxleave\fP option, \fBchronyd\fP +will send two extra packets instead of one. +.RE +.sp +\fBminstratum\fP \fIstratum\fP +.RS 4 +When the synchronisation source is selected from available sources, sources +with lower stratum are normally slightly preferred. This option can be used to +increase stratum of the source to the specified minimum, so \fBchronyd\fP will +avoid selecting that source. This is useful with low\-stratum sources that are +known to be unreliable or inaccurate and which should be used only when other +sources are unreachable. +.RE +.sp +\fBversion\fP \fIversion\fP +.RS 4 +This option sets the NTP version of packets sent to the server. This can be +useful when the server runs an old NTP implementation that does not respond to +requests using a newer version. The default version depends on other options. +If the \fBextfield\fP or \fBxleave\fP option is used, the default version is 4. If +those options are not used and the \fBkey\fP option specifies a key using a hash +function with output size longer than 160 bits (e.g. SHA256), the default +version is 3 for compatibility with older \fBchronyd\fP servers. In other cases, +the default version is 4. +.RE +.sp +\fBcopy\fP +.RS 4 +This option specifies that the server and client are closely related, their +configuration does not allow a synchronisation loop to form between them, and +the client is allowed to assume the reference ID and stratum of the server. +This is useful when multiple instances of \f(CRchronyd\fP are running on one computer +(e.g. for security or performance reasons), one primarily operating as a client +to synchronise the system clock and other instances started with the \fB\-x\fP +option to operate as NTP servers for other computers with their NTP clocks +synchronised to the first instance. +.RE +.sp +\fBextfield\fP \fItype\fP +.RS 4 +This option enables an NTPv4 extension field specified by its type as a +hexadecimal number. It will be included in requests sent to the server and +processed in received responses if the server supports it. Note that some +server implementations do not respond to requests containing an unknown +extension field (\fBchronyd\fP as a server responded to such requests since +version 2.0). +.sp +The following extension field can be enabled by this option: +.sp +\fIF323\fP +.RS 4 +This is an experimental extension field for some improvements that were +proposed for the next version of the NTP protocol (NTPv5). The field contains +root delay and dispersion in higher resolution and a monotonic receive +timestamp, which enables a frequency transfer between the server and client. It +can significantly improve stability of the synchronization. Generally, it +should be expected to work only between servers and clients running the same +version of \fBchronyd\fP. +.RE +.RE +.sp + +.RS 4 +.RE +.RE +.sp +\fBpool\fP \fIname\fP [\fIoption\fP]... +.RS 4 +The syntax of this directive is similar to that for the \fBserver\fP +directive, except that it is used to specify a pool of NTP servers rather than +a single NTP server. The pool name is expected to resolve to multiple addresses +which might change over time. +.sp +This directive can be used multiple times to specify multiple pools. +.sp +All options valid in the \fBserver\fP directive can be used in this +directive too. There is one option specific to the \fBpool\fP directive: +.sp +\fBmaxsources\fP \fIsources\fP +.RS 4 +This option sets the desired number of sources to be used from the pool. +\fBchronyd\fP will repeatedly try to resolve the name until it gets this number of +sources responding to requests. The default value is 4 and the maximum value is +16. +.sp +An example of the \fBpool\fP directive is +.sp +.if n .RS 4 +.nf +.fam C +pool pool.ntp.org iburst maxsources 3 +.fam +.fi +.if n .RE +.RE +.RE +.sp +\fBpeer\fP \fIhostname\fP [\fIoption\fP]... +.RS 4 +The syntax of this directive is identical to that for the \fBserver\fP +directive, except that it specifies a symmetric association with an NTP peer +instead of a client/server association with an NTP server. A single symmetric +association allows the peers to be both servers and clients to each other. This +is mainly useful when the NTP implementation of the peer (e.g. \fBntpd\fP) supports +ephemeral symmetric associations and does not need to be configured with an +address of this host. \fBchronyd\fP does not support ephemeral associations. +.sp +This directive can be used multiple times to specify multiple peers. +.sp +The following options of the \fBserver\fP directive do not work in the \fBpeer\fP +directive: \fBiburst\fP, \fBburst\fP, \fBnts\fP, \fBpresend\fP, \fBcopy\fP. +.sp +When using the \fBxleave\fP option, both peers must support and have enabled the +interleaved mode, otherwise the synchronisation will work in one direction +only. +When a key is specified by the \fBkey\fP option to enable authentication, both +peers must use the same key and the same key number. +.sp +Note that the symmetric mode is less secure than the client/server mode. A +denial\-of\-service attack is possible on unauthenticated symmetric associations, +i.e. when the peer was specified without the \fBkey\fP option. An attacker who does +not see network traffic between two hosts, but knows that they are peering with +each other, can periodically send them unauthenticated packets with spoofed +source addresses in order to disrupt their NTP state and prevent them from +synchronising to each other. When the association is authenticated, an attacker +who does see the network traffic, but cannot prevent the packets from reaching +the other host, can still disrupt the state by replaying old packets. The +attacker has effectively the same power as a man\-in\-the\-middle attacker. A +partial protection against this attack is implemented in \fBchronyd\fP, which can +protect the peers if they are using the same polling interval and they never +sent an authenticated packet with a timestamp from future, but it should not be +relied on as it is difficult to ensure the conditions are met. If two hosts +should be able to synchronise to each other in both directions, it is +recommended to use two separate client/server associations (specified by the +\fBserver\fP directive on both hosts) instead. +.RE +.sp +\fBinitstepslew\fP \fIstep\-threshold\fP [\fIhostname\fP]... +.RS 4 +(This directive is deprecated in favour of the \fBmakestep\fP +directive.) +.sp +The purpose of the \fBinitstepslew\fP directive is to allow \fBchronyd\fP to make a +rapid measurement of the system clock error at boot time, and to correct the +system clock by stepping before normal operation begins. Since this would +normally be performed only at an appropriate point in the system boot sequence, +no other software should be adversely affected by the step. +.sp +If the correction required is less than a specified threshold, a slew is used +instead. This makes it safer to restart \fBchronyd\fP whilst the system is in +normal operation. +.sp +The \fBinitstepslew\fP directive takes a threshold and a list of NTP servers as +arguments. Each of the servers is rapidly polled several times, and a majority +voting mechanism used to find the most likely range of system clock error that +is present. A step or slew is applied to the system clock to correct this +error. \fBchronyd\fP then enters its normal operating mode. +.sp +An example of the use of the directive is: +.sp +.if n .RS 4 +.nf +.fam C +initstepslew 30 foo.example.net bar.example.net baz.example.net +.fam +.fi +.if n .RE +.sp +where 3 NTP servers are used to make the measurement. The \fI30\fP indicates that +if the system\(cqs error is found to be 30 seconds or less, a slew will be used to +correct it; if the error is above 30 seconds, a step will be used. +.sp +The \fBinitstepslew\fP directive can also be used in an isolated LAN environment, +where the clocks are set manually. The most stable computer is chosen as the +primary server and the other computers are its clients. If each of the clients +is configured with the \fBlocal\fP directive, the server can be set up +with an \fBinitstepslew\fP directive which references some or all of the clients. +Then, if the server machine has to be rebooted, the clients can be relied on to +act analogously to a flywheel and preserve the time for a short period while +the server completes its reboot. +.sp +The \fBinitstepslew\fP directive is functionally similar to a combination of the +\fBmakestep\fP and \fBserver\fP directives with the \fBiburst\fP +option. The main difference is that the \fBinitstepslew\fP servers are used only +before normal operation begins and that the foreground \fBchronyd\fP process waits +for \fBinitstepslew\fP to finish before exiting. This prevent programs started in +the boot sequence after \fBchronyd\fP from reading the clock before it has been +stepped. With the \fBmakestep\fP directive, the +\fBwaitsync\fP command of \fBchronyc\fP can be used instead. +.RE +.sp +\fBrefclock\fP \fIdriver\fP \fIparameter\fP[:\fIoption\fP]... [\fIoption\fP]... +.RS 4 +The \fBrefclock\fP directive specifies a hardware reference clock to be used as a +time source. It has two mandatory parameters, a driver name and a +driver\-specific parameter. The two parameters are followed by zero or more +refclock options. Some drivers have special options, which can be appended to +the driver\-specific parameter using the \fB:\fP character. +.sp +This directive can be used multiple times to specify multiple reference clocks. +.sp +There are four drivers included in \fBchronyd\fP: +.sp +\fBPPS\fP +.RS 4 +Driver for the kernel PPS (pulse per second) API. The parameter is the path to +the PPS device (typically \fI/dev/pps?\fP). As PPS refclocks do not supply full +time, another time source (e.g. NTP server or non\-PPS refclock) is needed to +complete samples from the PPS refclock. An alternative is to enable the +\fBlocal\fP directive to allow synchronisation with some unknown but +constant offset. The driver supports the following option: +.sp +\fBclear\fP +.RS 4 +By default, the PPS refclock uses assert events (rising edge) for +synchronisation. With this option, it will use clear events (falling edge) +instead. +.RE +.RE +.sp + +.RS 4 +Examples: +.sp +.if n .RS 4 +.nf +.fam C +refclock PPS /dev/pps0 lock NMEA refid GPS +refclock SHM 0 offset 0.5 delay 0.2 refid NMEA noselect +refclock PPS /dev/pps1:clear refid GPS2 +.fam +.fi +.if n .RE +.RE +.sp +\fBSHM\fP +.RS 4 +NTP shared memory driver. This driver uses a shared memory segment to receive +samples from another process (e.g. \fBgpsd\fP). The parameter is the number of the +shared memory segment, typically a small number like 0, 1, 2, or 3. The driver +supports the following option: +.sp +\fBperm\fP=\fImode\fP +.RS 4 +This option specifies the permissions of the shared memory segment created by +\fBchronyd\fP. They are specified as a numeric mode. The default value is 0600 +(read\-write access for owner only). +.RE +.RE +.sp + +.RS 4 +.sp +Examples: +.sp +.if n .RS 4 +.nf +.fam C +refclock SHM 0 poll 3 refid GPS1 +refclock SHM 1:perm=0644 refid GPS2 +.fam +.fi +.if n .RE +.RE +.sp +\fBSOCK\fP +.RS 4 +Unix domain socket driver. It is similar to the SHM driver, but samples are +received from a Unix domain socket instead of shared memory and the messages +have a different format. The parameter is the path to the socket, which +\fBchronyd\fP creates on start. An advantage over the SHM driver is that SOCK does +not require polling and it can receive PPS samples with incomplete time. The +format of the messages is described in the \fIrefclock_sock.c\fP file in the chrony +source code. +.sp +An application which supports the SOCK protocol is the \fBgpsd\fP daemon. The path +where \fBgpsd\fP expects the socket to be created is described in the \fBgpsd(8)\fP man +page. For example: +.sp +.if n .RS 4 +.nf +.fam C +refclock SOCK /var/run/chrony.ttyS0.sock +.fam +.fi +.if n .RE +.RE +.sp +\fBPHC\fP +.RS 4 +PTP hardware clock (PHC) driver. The parameter is the path to the device of +the PTP clock which should be used as a time source. If the clock is kept in +TAI instead of UTC (e.g. it is synchronised by a PTP daemon), the current +UTC\-TAI offset needs to be specified by the \fBoffset\fP option. Alternatively, the +\fBpps\fP refclock option can be enabled to treat the PHC as a PPS refclock, using +only the sub\-second offset for synchronisation. The driver supports the +following options: +.sp +\fBnocrossts\fP +.RS 4 +This option disables use of precise cross timestamping. +.RE +.sp +\fBextpps\fP +.RS 4 +This option enables a PPS mode in which the PTP clock is timestamping pulses +of an external PPS signal connected to the clock. The clock does not need to be +synchronised, but another time source is needed to complete the PPS samples. +Note that some PTP clocks cannot be configured to timestamp only assert or +clear events, and it is necessary to use the \fBwidth\fP option to filter wrong +PPS samples. +.RE +.sp +\fBpin\fP=\fIindex\fP +.RS 4 +This option specifies the index of the pin which should be enabled for the +PPS timestamping. If the PHC does not have configurable pins (i.e. the channel +function is fixed), the index needs to be set to \-1 to disable the pin +configuration. The default value is 0. +.RE +.sp +\fBchannel\fP=\fIindex\fP +.RS 4 +This option specifies the index of the channel for the PPS mode. The default +value is 0. +.RE +.sp +\fBclear\fP +.RS 4 +This option enables timestamping of clear events (falling edge) instead of +assert events (rising edge) in the PPS mode. This may not work with some +clocks. +.RE +.RE +.sp + +.RS 4 +.sp +Examples: +.sp +.if n .RS 4 +.nf +.fam C +refclock PHC /dev/ptp0 poll 0 dpoll \-2 offset \-37 +refclock PHC /dev/ptp1:nocrossts poll 3 pps +refclock PHC /dev/ptp2:extpps:pin=1 width 0.2 poll 2 +.fam +.fi +.if n .RE +.RE +.RE +.sp + +.RS 4 +The \fBrefclock\fP directive supports the following options: +.sp +\fBpoll\fP \fIpoll\fP +.RS 4 +Timestamps produced by refclock drivers are not used immediately, but they are +stored and processed by a median filter in the polling interval specified by +this option. This is defined as a power of 2 and can be negative to specify a +sub\-second interval. The default is 4 (16 seconds). A shorter interval allows +\fBchronyd\fP to react faster to changes in the frequency of the system clock, but +it might have a negative effect on its accuracy if the samples have a lot of +jitter. +.RE +.sp +\fBdpoll\fP \fIdpoll\fP +.RS 4 +Some drivers do not listen for external events and try to produce samples in +their own polling interval. This is defined as a power of 2 and can be negative +to specify a sub\-second interval. The default is 0 (1 second). +.RE +.sp +\fBrefid\fP \fIrefid\fP +.RS 4 +This option is used to specify the reference ID of the refclock, as up to four +ASCII characters. The default reference ID is composed from the first three +characters of the driver name and the number of the refclock. Each refclock +must have a unique reference ID. +.RE +.sp +\fBlock\fP \fIrefid\fP +.RS 4 +This option can be used to lock a PPS refclock to another refclock, which is +specified by its reference ID. In this mode received PPS samples are paired +directly with raw samples from the specified refclock. +.RE +.sp +\fBrate\fP \fIrate\fP +.RS 4 +This option sets the rate of the pulses in the PPS signal (in Hz). This option +controls how the pulses will be completed with real time. To actually receive +more than one pulse per second, a negative \fBdpoll\fP has to be specified (\-3 for +a 5Hz signal). The default is 1. +.RE +.sp +\fBmaxlockage\fP \fIpulses\fP +.RS 4 +This option specifies in number of pulses how old can be samples from the +refclock specified by the \fBlock\fP option to be paired with the pulses. +Increasing this value is useful when the samples are produced at a lower rate +than the pulses. The default is 2. +.RE +.sp +\fBwidth\fP \fIwidth\fP +.RS 4 +This option specifies the width of the pulses (in seconds). It is used to +filter PPS samples when the driver provides samples for both rising and falling +edges. Note that it reduces the maximum allowed error of the time source which +completes the PPS samples. If the duty cycle is configurable, 50% should be +preferred in order to maximise the allowed error. +.RE +.sp +\fBpps\fP +.RS 4 +This options forces \fBchronyd\fP to treat any refclock (e.g. SHM or PHC) as a PPS +refclock. This can be useful when the refclock provides time with a variable +offset of a whole number of seconds (e.g. it uses TAI instead of UTC). Another +time source is needed to complete samples from the refclock. +.RE +.sp +\fBoffset\fP \fIoffset\fP +.RS 4 +This option can be used to compensate for a constant error. The specified +offset (in seconds) is applied to all samples produced by the reference clock. +The default is 0.0. +.RE +.sp +\fBdelay\fP \fIdelay\fP +.RS 4 +This option sets the NTP delay of the source (in seconds). Half of this value +is included in the maximum assumed error which is used in the source selection +algorithm. Increasing the delay is useful to avoid having no majority in the +source selection or to make it prefer other sources. The default is 1e\-9 (1 +nanosecond). +.RE +.sp +\fBstratum\fP \fIstratum\fP +.RS 4 +This option sets the NTP stratum of the refclock. This can be useful when the +refclock provides time with a stratum other than 0. The default is 0. +.RE +.sp +\fBprecision\fP \fIprecision\fP +.RS 4 +This option sets the precision of the reference clock (in seconds). The default +value is the estimated precision of the system clock. +.RE +.sp +\fBmaxdispersion\fP \fIdispersion\fP +.RS 4 +Maximum allowed dispersion for filtered samples (in seconds). Samples with +larger estimated dispersion are ignored. By default, this limit is disabled. +.RE +.sp +\fBfilter\fP \fIsamples\fP +.RS 4 +This option sets the length of the median filter which is used to reduce the +noise in the measurements. With each poll about 40 percent of the stored +samples are discarded and one final sample is calculated as an average of the +remaining samples. If the length is 4 or more, at least 4 samples have to be +collected between polls. For lengths below 4, the filter has to be full. The +default is 64. +.RE +.sp +\fBprefer\fP +.RS 4 +Prefer this source over sources without the prefer option. +.RE +.sp +\fBnoselect\fP +.RS 4 +Never select this source. This is useful for monitoring or with sources which +are not very accurate, but are locked with a PPS refclock. +.RE +.sp +\fBtrust\fP +.RS 4 +Assume time from this source is always true. It can be rejected as a +falseticker in the source selection only if another source with this option +does not agree with it. +.RE +.sp +\fBrequire\fP +.RS 4 +Require that at least one of the sources specified with this option is +selectable (i.e. recently reachable and not a falseticker) before updating the +clock. Together with the \fBtrust\fP option this can be useful to allow a trusted, +but not very precise, reference clock to be safely combined with +unauthenticated NTP sources in order to improve the accuracy of the clock. They +can be selected and used for synchronisation only if they agree with the +trusted and required source. +.RE +.sp +\fBtai\fP +.RS 4 +This option indicates that the reference clock keeps time in TAI instead of UTC +and that \fBchronyd\fP should correct its offset by the current TAI\-UTC offset. The +\fBleapsectz\fP directive must be used with this option and the +database must be kept up to date in order for this correction to work as +expected. This option does not make sense with PPS refclocks. +.RE +.sp +\fBlocal\fP +.RS 4 +This option specifies that the reference clock is an unsynchronised clock which +is more stable than the system clock (e.g. TCXO, OCXO, or atomic clock) and +it should be used as a local standard to stabilise the system clock. The +refclock will bypass the source selection. There should be at most one refclock +specified with this option and it should have the shortest polling interval +among all configured sources. +.RE +.sp +\fBminsamples\fP \fIsamples\fP +.RS 4 +Set the minimum number of samples kept for this source. This overrides the +\fBminsamples\fP directive. +.RE +.sp +\fBmaxsamples\fP \fIsamples\fP +.RS 4 +Set the maximum number of samples kept for this source. This overrides the +\fBmaxsamples\fP directive. +.RE +.RE +.sp +\fBmanual\fP +.RS 4 +The \fBmanual\fP directive enables support at run\-time for the +\fBsettime\fP command in \fBchronyc\fP. If no \fBmanual\fP +directive is included, any attempt to use the \fBsettime\fP command in \fBchronyc\fP +will be met with an error message. +.sp +Note that the \fBsettime\fP command can be enabled at run\-time using +the \fBmanual\fP command in \fBchronyc\fP. (The idea of the two +commands is that the \fBmanual\fP command controls the manual clock driver\(cqs +behaviour, whereas the \fBsettime\fP command allows samples of manually entered +time to be provided.) +.RE +.sp +\fBacquisitionport\fP \fIport\fP +.RS 4 +By default, \fBchronyd\fP as an NTP client opens a new socket for each request with +the source port chosen randomly by the operating system. The \fBacquisitionport\fP +directive can be used to specify the source port and use only one socket (per +IPv4 or IPv6 address family) for all configured servers. This can be useful for +getting through some firewalls. It should not be used if not necessary as there +is a small impact on security of the client. If set to 0, the source port of +the permanent socket will be chosen randomly by the operating system. +.sp +It can be set to the same port as is used by the NTP server (which can be +configured with the \fBport\fP directive) to use only one socket for all +NTP packets. +.sp +An example of the \fBacquisitionport\fP directive is: +.sp +.if n .RS 4 +.nf +.fam C +acquisitionport 1123 +.fam +.fi +.if n .RE +.sp +This would change the source port used for client requests to UDP port 1123. +You could then persuade the firewall administrator to open that port. +.RE +.sp +\fBbindacqaddress\fP \fIaddress\fP +.RS 4 +The \fBbindacqaddress\fP directive specifies a local IP address to which +\fBchronyd\fP will bind its NTP and NTS\-KE client sockets. The syntax is similar to +the \fBbindaddress\fP and \fBbindcmdaddress\fP +directives. +.sp +For each of the IPv4 and IPv6 protocols, only one \fBbindacqaddress\fP directive +can be specified. +.RE +.sp +\fBbindacqdevice\fP \fIinterface\fP +.RS 4 +The \fBbindacqdevice\fP directive binds the client sockets to a network device +specified by the interface name. This can be useful when the local address is +dynamic, or to enable an NTP source specified with a link\-local IPv6 address. +This directive can specify only one interface and it is supported on Linux +only. +.sp +An example of the directive is: +.sp +.if n .RS 4 +.nf +.fam C +bindacqdevice eth0 +.fam +.fi +.if n .RE +.RE +.sp +\fBdscp\fP \fIpoint\fP +.RS 4 +The \fBdscp\fP directive sets the Differentiated Services Code Point (DSCP) in +transmitted NTP packets to the specified value. It can improve stability of NTP +measurements in local networks where switches or routers are configured to +prioritise forwarding of packets with specific DSCP values. The default value +is 0 and the maximum value is 63. +.sp +An example of the directive (setting the Expedited Forwarding class) is: +.sp +.if n .RS 4 +.nf +.fam C +dscp 46 +.fam +.fi +.if n .RE +.RE +.sp +\fBdumpdir\fP \fIdirectory\fP +.RS 4 +To compute the rate of gain or loss of time, \fBchronyd\fP has to store a +measurement history for each of the time sources it uses. +.sp +All supported systems, with the exception of macOS 10.12 and earlier, have +operating system support for setting the rate of gain or loss to compensate for +known errors. +(On macOS 10.12 and earlier, \fBchronyd\fP must simulate such a capability by +periodically slewing the system clock forwards or backwards by a suitable amount +to compensate for the error built up since the previous slew.) +.sp +For such systems, it is possible to save the measurement history across +restarts of \fBchronyd\fP (assuming no changes are made to the system clock +behaviour whilst it is not running). The \fBdumpdir\fP directive defines the +directory where the measurement histories are saved when \fBchronyd\fP exits, +or the \fBdump\fP command in \fBchronyc\fP is issued. +.sp +If the directory does not exist, it will be created automatically. +.sp +The \fB\-r\fP option of \fBchronyd\fP enables loading of the dump files on start. All +dump files found in the directory will be removed after start, even if the \fB\-r\fP +option is not present. +.sp +An example of the directive is: +.sp +.if n .RS 4 +.nf +.fam C +dumpdir @CHRONYRUNDIR@ +.fam +.fi +.if n .RE +.sp +A source whose IP address is \fI1.2.3.4\fP would have its measurement history saved +in the file \fI@CHRONYRUNDIR@/1.2.3.4.dat\fP. History of reference clocks is saved +to files named by their reference ID in form of \fIrefid:XXXXXXXX.dat\fP. +.RE +.sp +\fBmaxsamples\fP \fIsamples\fP +.RS 4 +The \fBmaxsamples\fP directive sets the default maximum number of samples that +\fBchronyd\fP should keep for each source. This setting can be overridden for +individual sources in the \fBserver\fP and \fBrefclock\fP +directives. The default value is 0, which disables the configurable limit. The +useful range is 4 to 64. +.sp +As a special case, setting \fBmaxsamples\fP to 1 disables frequency tracking in +order to make the sources immediately selectable with only one sample. This can +be useful when \fBchronyd\fP is started with the \fB\-q\fP or \fB\-Q\fP option. +.RE +.sp +\fBminsamples\fP \fIsamples\fP +.RS 4 +The \fBminsamples\fP directive sets the default minimum number of samples that +\fBchronyd\fP should keep for each source. This setting can be overridden for +individual sources in the \fBserver\fP and \fBrefclock\fP +directives. The default value is 6. The useful range is 4 to 64. +.sp +Forcing \fBchronyd\fP to keep more samples than it would normally keep reduces +noise in the estimated frequency and offset, but slows down the response to +changes in the frequency and offset of the clock. The offsets in the +\fBtracking\fP and +\fBsourcestats\fP reports (and the \fItracking.log\fP and +\fIstatistics.log\fP files) may be smaller than the actual offsets. +.RE +.sp +\fBntsdumpdir\fP \fIdirectory\fP +.RS 4 +This directive specifies a directory for the client to save NTS cookies it +received from the server in order to avoid making an NTS\-KE request when +\fBchronyd\fP is started again. The cookies are saved separately for each NTP +source in files named by the IP address of the NTS\-KE server (e.g. +\fI1.2.3.4.nts\fP). By default, the client does not save the cookies. +.sp +If the directory does not exist, it will be created automatically. +.sp +An example of the directive is: +.sp +.if n .RS 4 +.nf +.fam C +ntsdumpdir @CHRONYVARDIR@ +.fam +.fi +.if n .RE +.sp +This directory is used also by the NTS server to save keys. +.RE +.sp +\fBntsrefresh\fP \fIinterval\fP +.RS 4 +This directive specifies the maximum interval between NTS\-KE handshakes (in +seconds) in order to refresh the keys authenticating NTP packets. The default +value is 2419200 (4 weeks) and the maximum value is 2^31\-1 (68 years). +.RE +.sp +\fBntstrustedcerts\fP [\fIset\-ID\fP] \fIfile\fP|\fIdirectory\fP +.RS 4 +This directive specifies a file or directory containing certificates (in the +PEM format) of trusted certificate authorities (CA) which can be used to +verify certificates of NTS servers. +.sp +The optional \fIset\-ID\fP argument is a number in the range 0 through 2^32\-1, which +selects the set of certificates where certificates from the specified file +or directory are added. The default ID is 0, which is a set containing the +system\(cqs default trusted CAs (unless the \fBnosystemcert\fP directive is present). +All other sets are empty by default. A set of certificates can be selected for +verification of an NTS server by the \fBcertset\fP option in the \fBserver\fP or \fBpool\fP +directive. +.sp +This directive can be used multiple times to specify one or more sets of +trusted certificates, each containing certificates from one or more files +and/or directories. +.sp +It is not necessary to restart \fBchronyd\fP in order to reload the certificates if +they change (e.g. after a renewal). +.sp +An example is: +.sp +.if n .RS 4 +.nf +.fam C +ntstrustedcerts /etc/pki/nts/foo.crt +ntstrustedcerts 1 /etc/pki/nts/bar.crt +ntstrustedcerts 1 /etc/pki/nts/baz.crt +ntstrustedcerts 2 /etc/pki/nts/qux.crt +.fam +.fi +.if n .RE +.RE +.sp +\fBnosystemcert\fP +.RS 4 +This directive disables the system\(cqs default trusted CAs. Only certificates +specified by the \fBntstrustedcerts\fP directive will be trusted. +.RE +.sp +\fBnocerttimecheck\fP \fIlimit\fP +.RS 4 +This directive disables the checks of the activation and expiration times of +certificates for the specified number of clock updates. It allows the NTS +authentication mechanism to be used on computers which start with wrong time +(e.g. due to not having an RTC or backup battery). Disabling the time checks +has important security implications and should be used only as a last resort, +preferably with a minimal number of trusted certificates. The default value is +0, which means the time checks are always enabled. +.sp +An example of the directive is: +.sp +.if n .RS 4 +.nf +.fam C +nocerttimecheck 1 +.fam +.fi +.if n .RE +.sp +This would disable the time checks until the clock is updated for the first +time, assuming the first update corrects the clock and later checks can work +with correct time. +.RE +.SS "Source selection" +.sp +\fBauthselectmode\fP \fImode\fP +.RS 4 +NTP sources can be specified with the \fBkey\fP or \fBnts\fP option to enable +authentication to limit the impact of man\-in\-the\-middle attacks. The +attackers can drop or delay NTP packets (up to the \fBmaxdelay\fP and +\fBmaxdistance\fP limits), but they cannot modify the timestamps +contained in the packets. The attack can cause only a limited slew or step, and +also cause the clock to run faster or slower than real time (up to double of +the \fBmaxdrift\fP limit). +.sp +When authentication is enabled for an NTP source, it is important to disable +unauthenticated NTP sources which could be exploited in the attack, e.g. if +they are not reachable only over a trusted network. Alternatively, the source +selection can be configured with the \fBrequire\fP and \fBtrust\fP options to +synchronise to the unauthenticated sources only if they agree with the +authenticated sources and might have a positive impact on the accuracy of the +clock. Note that in this case the impact of the attack is higher. The attackers +cannot cause an arbitrarily large step or slew, but they have more control over +the frequency of the clock and can cause \fBchronyd\fP to report false information, +e.g. a significantly smaller root delay and dispersion. +.sp +This directive determines the default selection options for authenticated and +unauthenticated sources in order to simplify the configuration with the +configuration file and \fBchronyc\fP commands. It sets a policy for authentication. +.sp +Sources specified with the \fBnoselect\fP option are ignored (not counted as either +authenticated or unauthenticated), and they always have only the selection +options specified in the configuration. +.sp +There are four modes: +.sp +\fBrequire\fP +.RS 4 +Authentication is strictly required for NTP sources in this mode. If any +unauthenticated NTP sources are specified, they will automatically get the +\fBnoselect\fP option to prevent them from being selected for synchronisation. +.RE +.sp +\fBprefer\fP +.RS 4 +In this mode, authentication is optional and preferred. If it is enabled for at +least one NTP source, all unauthenticated NTP sources will get the \fBnoselect\fP +option. +.RE +.sp +\fBmix\fP +.RS 4 +In this mode, authentication is optional and synchronisation to a mix of +authenticated and unauthenticated NTP sources is allowed. If both authenticated +and unauthenticated NTP sources are specified, all authenticated NTP sources +and reference clocks will get the \fBrequire\fP and \fBtrust\fP options to prevent +synchronisation to unauthenticated NTP sources if they do not agree with a +majority of the authenticated sources and reference clocks. This is the default +mode. +.RE +.sp +\fBignore\fP +.RS 4 +In this mode, authentication is ignored in the source selection. All sources +will have only the selection options that were specified in the configuration +file, or \fBchronyc\fP command. This was the behaviour of \fBchronyd\fP in versions +before 4.0. +.RE +.RE +.sp + +.RS 4 +.sp +As an example, the following configuration using the default \fBmix\fP mode: +.sp +.if n .RS 4 +.nf +.fam C +server foo.example.net nts +server bar.example.net nts +server baz.example.net +refclock SHM 0 +.fam +.fi +.if n .RE +.sp +is equivalent to the following configuration using the \fBignore\fP mode: +.sp +.if n .RS 4 +.nf +.fam C +authselectmode ignore +server foo.example.net nts require trust +server bar.example.net nts require trust +server baz.example.net +refclock SHM 0 require trust +.fam +.fi +.if n .RE +.RE +.sp +\fBcombinelimit\fP \fIlimit\fP +.RS 4 +When \fBchronyd\fP has multiple sources available for synchronisation, it has to +select one source as the synchronisation source. The measured offsets and +frequencies of the system clock relative to the other sources, however, can be +combined with the selected source to improve the accuracy of the system clock. +.sp +The \fBcombinelimit\fP directive limits which sources are included in the combining +algorithm. Their synchronisation distance has to be shorter than the distance +of the selected source multiplied by the value of the limit. Also, their +measured frequencies have to be close to the frequency of the selected source. +If the selected source was specified with the \fBprefer\fP option, it can be +combined only with other sources specified with this option. +.sp +By default, the limit is 3. Setting the limit to 0 effectively disables the +source combining algorithm and only the selected source will be used to control +the system clock. +.RE +.sp +\fBmaxdistance\fP \fIdistance\fP +.RS 4 +The \fBmaxdistance\fP directive sets the maximum root distance of a source to be +acceptable for synchronisation of the clock. Sources that have a distance +larger than the specified distance will be rejected. The distance estimates the +maximum error of the source. It includes the root dispersion and half of the +root delay (round\-trip time) accumulated on the path to the primary source. +.sp +By default, the maximum root distance is 3 seconds. +.sp +Setting \fBmaxdistance\fP to a larger value can be useful to allow synchronisation +with a server that only has a very infrequent connection to its sources and can +accumulate a large dispersion between updates of its clock. +.RE +.sp +\fBmaxjitter\fP \fIjitter\fP +.RS 4 +The \fBmaxjitter\fP directive sets the maximum allowed jitter of the sources to not +be rejected by the source selection algorithm. This prevents synchronisation +with sources that have a small root distance, but their time is too variable. +.sp +By default, the maximum jitter is 1 second. +.RE +.sp +\fBminsources\fP \fIsources\fP +.RS 4 +The \fBminsources\fP directive sets the minimum number of sources that need to be +considered as selectable in the source selection algorithm before the local +clock is updated. The default value is 1. +.sp +Setting this option to a larger number can be used to improve the reliability. +More sources will have to agree with each other and the clock will not be +updated when only one source (which could be serving incorrect time) is +reachable. +.RE +.sp +\fBreselectdist\fP \fIdistance\fP +.RS 4 +When \fBchronyd\fP selects a synchronisation source from available sources, it +will prefer the one with the shortest synchronisation distance. However, to +avoid frequent reselecting when there are sources with similar distance, a +fixed distance is added to the distance for sources that are currently not +selected. This can be set with the \fBreselectdist\fP directive. By default, the +distance is 100 microseconds. +.RE +.sp +\fBstratumweight\fP \fIdistance\fP +.RS 4 +The \fBstratumweight\fP directive sets how much distance should be added per +stratum to the synchronisation distance when \fBchronyd\fP selects the +synchronisation source from available sources. +.sp +By default, the weight is 0.001 seconds. This means that the stratum of the sources +in the selection process matters only when the differences between the +distances are in milliseconds. +.RE +.SS "System clock" +.sp +\fBclockprecision\fP \fIprecision\fP +.RS 4 +The \fBclockprecision\fP directive specifies the precision of the system clock (in +seconds). It is used by \fBchronyd\fP to estimate the minimum noise in NTP +measurements and randomise low\-order bits of timestamps in NTP responses. By +default, the precision is measured on start as the minimum time to read the +clock. +.sp +The measured value works well in most cases. However, it generally +overestimates the precision and it can be sensitive to the CPU speed, which can +change over time to save power. In some cases with a high\-precision clocksource +(e.g. the Time Stamp Counter of the CPU) and hardware timestamping, setting the +precision on the server to a smaller value can improve stability of clients\(aq +NTP measurements. The server\(cqs precision is reported on clients by the +\fBntpdata\fP command. +.sp +An example setting the precision to 8 nanoseconds is: +.sp +.if n .RS 4 +.nf +.fam C +clockprecision 8e\-9 +.fam +.fi +.if n .RE +.RE +.sp +\fBcorrtimeratio\fP \fIratio\fP +.RS 4 +When \fBchronyd\fP is slewing the system clock to correct an offset, the rate at +which it is slewing adds to the frequency error of the clock. On all supported +systems, with the exception of macOS 12 and earlier, this rate can be +controlled. +.sp +The \fBcorrtimeratio\fP directive sets the ratio between the duration in which the +clock is slewed for an average correction according to the source history and +the interval in which the corrections are done (usually the NTP polling +interval). Corrections larger than the average take less time and smaller +corrections take more time, the amount of the correction and the correction +time are inversely proportional. +.sp +Increasing \fBcorrtimeratio\fP improves the overall frequency error of the system +clock, but increases the overall time error as the corrections take longer. +.sp +By default, the ratio is set to 3, the time accuracy of the clock is preferred +over its frequency accuracy. +.sp +The maximum allowed slew rate can be set by the \fBmaxslewrate\fP +directive. The current remaining correction is shown in the +\fBtracking\fP report as the \fBSystem time\fP value. +.RE +.sp +\fBdriftfile\fP \fIfile\fP +.RS 4 +One of the main activities of the \fBchronyd\fP program is to work out the rate at +which the system clock gains or loses time relative to real time. +.sp +Whenever \fBchronyd\fP computes a new value of the gain or loss rate, it is desirable +to record it somewhere. This allows \fBchronyd\fP to begin compensating the system +clock at that rate whenever it is restarted, even before it has had a chance to +obtain an equally good estimate of the rate during the new run. (This process +can take many minutes, at least.) +.sp +The \fBdriftfile\fP directive allows a file to be specified into which \fBchronyd\fP +can store the rate information. Two parameters are recorded in the file. The +first is the rate at which the system clock gains or loses time, expressed in +parts per million, with gains positive. Therefore, a value of 100.0 indicates +that when the system clock has advanced by a second, it has gained 100 +microseconds in reality (so the true time has only advanced by 999900 +microseconds). The second is an estimate of the error bound around the first +value in which the true rate actually lies. +.sp +An example of the driftfile directive is: +.sp +.if n .RS 4 +.nf +.fam C +driftfile @CHRONYVARDIR@/drift +.fam +.fi +.if n .RE +.RE +.sp +\fBfallbackdrift\fP \fImin\-interval\fP \fImax\-interval\fP +.RS 4 +Fallback drifts are long\-term averages of the system clock drift calculated +over exponentially increasing intervals. They are used to avoid quickly +drifting away from true time when the clock was not updated for a longer period +of time and there was a short\-term deviation in the drift before the updates +stopped. +.sp +The directive specifies the minimum and maximum interval since the last clock +update to switch between fallback drifts. They are defined as a power of 2 (in +seconds). The syntax is as follows: +.sp +.if n .RS 4 +.nf +.fam C +fallbackdrift 16 19 +.fam +.fi +.if n .RE +.sp +In this example, the minimum interval is 16 (18 hours) and the maximum interval is +19 (6 days). The system clock frequency will be set to the first fallback 18 +hours after last clock update, to the second after 36 hours, and so on. This +might be a good setting to cover frequency changes due to daily and weekly +temperature fluctuations. When the frequency is set to a fallback, the state of +the clock will change to \(oqNot synchronised\(cq. +.sp +By default (or if the specified maximum or minimum is 0), no fallbacks are used +and the clock frequency changes only with new measurements from NTP sources, +reference clocks, or manual input. +.RE +.sp +\fBleapsecmode\fP \fImode\fP +.RS 4 +A leap second is an adjustment that is occasionally applied to UTC to keep it +close to the mean solar time. When a leap second is inserted, the last day of +June or December has an extra second 23:59:60. +.sp +For computer clocks that is a problem. The Unix time is defined as number of +seconds since 00:00:00 UTC on 1 January 1970 without leap seconds. The system +clock cannot have time 23:59:60, every minute has 60 seconds and every day has +86400 seconds by definition. The inserted leap second is skipped and the clock +is suddenly ahead of UTC by one second. The \fBleapsecmode\fP directive selects how +that error is corrected. There are four options: +.sp +\fBsystem\fP +.RS 4 +When inserting a leap second, the kernel steps the system clock backwards by +one second when the clock gets to 00:00:00 UTC. When deleting a leap second, it +steps forward by one second when the clock gets to 23:59:59 UTC. This is the +default mode when the system driver supports leap seconds (i.e. all supported +systems with the exception of macOS 12 and earlier). +.RE +.sp +\fBstep\fP +.RS 4 +This is similar to the \fBsystem\fP mode, except the clock is stepped by +\fBchronyd\fP instead of the kernel. It can be useful to avoid bugs in the kernel +code that would be executed in the \fBsystem\fP mode. This is the default mode +when the system driver does not support leap seconds. +.RE +.sp +\fBslew\fP +.RS 4 +The clock is corrected by slewing started at 00:00:00 UTC when a leap second +is inserted or 23:59:59 UTC when a leap second is deleted. This might be +preferred over the \fBsystem\fP and \fBstep\fP modes when applications running on the +system are sensitive to jumps in the system time and it is acceptable that the +clock will be off for a longer time. On Linux with the default +\fBmaxslewrate\fP value the correction takes 12 seconds. +.RE +.sp +\fBignore\fP +.RS 4 +No correction is applied to the clock for the leap second. The clock will be +corrected later in normal operation when new measurements are made and the +estimated offset includes the one second error. This option is particularly +useful when multiple \fBchronyd\fP instances are running on the system, one +controlling the system clock and others started with the \fB\-x\fP option, which +should rely on the first instance to correct the system clock and ignore it for +the correction of their own NTP clock running on top of the system clock. +.RE +.RE +.sp + +.RS 4 +.sp +When serving time to NTP clients that cannot be configured to correct their +clocks for a leap second by slewing, or to clients that would correct at +slightly different rates when it is necessary to keep them close together, the +\fBslew\fP mode can be combined with the \fBsmoothtime\fP directive to +enable a server leap smear. +.sp +When smearing a leap second, the leap status is suppressed on the server and +the served time is corrected slowly by slewing instead of stepping. The clients +do not need any special configuration as they do not know there is any leap +second and they follow the server time which eventually brings them back to +UTC. Care must be taken to ensure they use only NTP servers which smear the +leap second in exactly the same way for synchronisation. +.sp +This feature must be used carefully, because the server is intentionally not +serving its best estimate of the true time. +.sp +A recommended configuration to enable a server leap smear is: +.sp +.if n .RS 4 +.nf +.fam C +leapsecmode slew +maxslewrate 1000 +smoothtime 400 0.001024 leaponly +.fam +.fi +.if n .RE +.sp +The first directive is necessary to disable the clock step which would reset +the smoothing process. The second directive limits the slewing rate of the +local clock to 1000 ppm, which improves the stability of the smoothing process +when the local correction starts and ends. The third directive enables the +server time smoothing process. It will start when the clock gets to 00:00:00 +UTC and it will take 62500 seconds (about 17.36 hours) to finish. The frequency +offset will be changing by 0.001024 ppm per second and will reach a maximum of +32 ppm in 31250 seconds. The \fBleaponly\fP option makes the duration of the leap +smear constant and allows the clients to safely synchronise with multiple +identically configured leap smearing servers. +.sp +The duration of the leap smear can be calculated from the specified wander as +.sp +.if n .RS 4 +.nf +.fam C +duration = sqrt(4 / wander) +.fam +.fi +.if n .RE +.RE +.sp +\fBleapsectz\fP \fItimezone\fP +.RS 4 +This directive specifies a timezone in the system timezone database which +\fBchronyd\fP can use to determine when will the next leap second occur and what is +the current offset between TAI and UTC. It will periodically check if 23:59:59 +and 23:59:60 are valid times in the timezone. This normally works with the +\fIright/UTC\fP timezone. +.sp +When a leap second is announced, the timezone needs to be updated at least 12 +hours before the leap second. It is not necessary to restart \fBchronyd\fP. +.sp +This directive is useful with reference clocks and other time sources which do +not announce leap seconds, or announce them too late for an NTP server to +forward them to its own clients. Clients of leap smearing servers must not +use this directive. +.sp +It is also useful when the system clock is required to have correct TAI\-UTC +offset. Note that the offset is set only when leap seconds are handled by the +kernel, i.e. \fBleapsecmode\fP is set to \fBsystem\fP. +.sp +The specified timezone is not used as an exclusive source of information about +leap seconds. If a majority of time sources announce on the last day of June or +December that a leap second should be inserted or deleted, it will be accepted +even if it is not included in the timezone. +.sp +An example of the directive is: +.sp +.if n .RS 4 +.nf +.fam C +leapsectz right/UTC +.fam +.fi +.if n .RE +.sp +The following shell command verifies that the timezone contains leap seconds +and can be used with this directive: +.sp +.if n .RS 4 +.nf +.fam C +$ TZ=right/UTC date \-d \(aqDec 31 2008 23:59:60\(aq +Wed Dec 31 23:59:60 UTC 2008 +.fam +.fi +.if n .RE +.RE +.sp +\fBmakestep\fP \fIthreshold\fP \fIlimit\fP +.RS 4 +Normally \fBchronyd\fP will cause the system to gradually correct any time offset, +by slowing down or speeding up the clock as required. In certain situations, +e.g. when \fBchronyd\fP is initially started, the system clock might be so far +adrift that this slewing process would take a very long time to correct the +system clock. +.sp +This directive forces \fBchronyd\fP to step the system clock if the adjustment is +larger than a threshold value, but only if there were no more clock updates +since \fBchronyd\fP was started than the specified limit. A negative value disables +the limit. +.sp +On most systems it is desirable to step the system clock only on boot, before +starting programs that rely on time advancing monotonically forwards. +.sp +An example of the use of this directive is: +.sp +.if n .RS 4 +.nf +.fam C +makestep 0.1 3 +.fam +.fi +.if n .RE +.sp +This would step the system clock if the adjustment is larger than 0.1 seconds, but +only in the first three clock updates. +.RE +.sp +\fBmaxchange\fP \fIoffset\fP \fIstart\fP \fIignore\fP +.RS 4 +This directive sets the maximum offset to be accepted on a clock update. The +offset is measured relative to the current estimate of the true time, which is +different from the system time if a previous slew did not finish. +.sp +The check is enabled after the specified number of clock updates to allow a +large initial offset to be corrected on start. Offsets larger than the +specified maximum will be ignored for the specified number of times. Another +large offset will cause \fBchronyd\fP to give up and exit. A negative value +can be used to disable the limit to ignore all large offsets. A syslog message +will be generated when an offset is ignored or it causes the exit. +.sp +An example of the use of this directive is: +.sp +.if n .RS 4 +.nf +.fam C +maxchange 1000 1 2 +.fam +.fi +.if n .RE +.sp +After the first clock update, \fBchronyd\fP will check the offset on every clock +update, it will ignore two adjustments larger than 1000 seconds and exit on +another one. +.RE +.sp +\fBmaxclockerror\fP \fIerror\-in\-ppm\fP +.RS 4 +The \fBmaxclockerror\fP directive sets the maximum assumed frequency error that the +system clock can gain on its own between clock updates. It describes the +stability of the clock. +.sp +By default, the maximum error is 1 ppm. +.sp +Typical values for \fIerror\-in\-ppm\fP might be 10 for a low quality clock and 0.1 +for a high quality clock using a temperature compensated crystal oscillator. +.RE +.sp +\fBmaxdrift\fP \fIdrift\-in\-ppm\fP +.RS 4 +This directive specifies the maximum assumed drift (frequency error) of the +system clock. It limits the frequency adjustment that \fBchronyd\fP is allowed to +use to correct the measured drift. It is an additional limit to the maximum +adjustment that can be set by the system driver (100000 ppm on Linux, 500 ppm +on FreeBSD, NetBSD, and macOS 10.13+, 32500 ppm on illumos). +.sp +By default, the maximum assumed drift is 500000 ppm, i.e. the adjustment is +limited by the system driver rather than this directive. +.RE +.sp +\fBmaxupdateskew\fP \fIskew\-in\-ppm\fP +.RS 4 +One of \fBchronyd\fP\(aqs tasks is to work out how fast or slow the computer\(cqs clock +runs relative to its reference sources. In addition, it computes an estimate of +the error bounds around the estimated value. +.sp +If the range of error is too large, it probably indicates that the measurements +have not settled down yet, and that the estimated gain or loss rate is not very +reliable. +.sp +The \fBmaxupdateskew\fP directive sets the threshold for determining whether an +estimate might be so unreliable that it should not be used. By default, the +threshold is 1000 ppm. +.sp +Typical values for \fIskew\-in\-ppm\fP might be 100 for NTP sources polled over a +wireless network, and 10 or smaller for sources on a local wired network. +.sp +It should be noted that this is not the only means of protection against using +unreliable estimates. At all times, \fBchronyd\fP keeps track of both the estimated +gain or loss rate, and the error bound on the estimate. When a new estimate is +generated following another measurement from one of the sources, a weighted +combination algorithm is used to update the master estimate. So if \fBchronyd\fP +has an existing highly\-reliable master estimate and a new estimate is generated +which has large error bounds, the existing master estimate will dominate in the +new master estimate. +.RE +.sp +\fBmaxslewrate\fP \fIrate\-in\-ppm\fP +.RS 4 +The \fBmaxslewrate\fP directive sets the maximum rate at which \fBchronyd\fP is allowed +to slew the time. It limits the slew rate controlled by the correction time +ratio (which can be set by the \fBcorrtimeratio\fP directive) and +is effective only on systems where \fBchronyd\fP is able to control the rate (i.e. +all supported systems with the exception of macOS 12 or earlier). +.sp +For each system there is a maximum frequency offset of the clock that can be set +by the driver. On Linux it is 100000 ppm, on FreeBSD, NetBSD and macOS 10.13+ it +is 5000 ppm, and on illumos it is 32500 ppm. Also, due to a kernel limitation, +setting \fBmaxslewrate\fP on FreeBSD, NetBSD, macOS 10.13+ to a value between 500 +ppm and 5000 ppm will effectively set it to 500 ppm. +.sp +By default, the maximum slew rate is set to 83333.333 ppm (one twelfth). +.RE +.sp +\fBtempcomp\fP \fIfile\fP \fIinterval\fP \fIT0\fP \fIk0\fP \fIk1\fP \fIk2\fP, \fBtempcomp\fP \fIfile\fP \fIinterval\fP \fIpoints\-file\fP +.RS 4 +Normally, changes in the rate of drift of the system clock are caused mainly by +changes in the temperature of the crystal oscillator on the motherboard. +.sp +If there are temperature measurements available from a sensor close to the +oscillator, the \fBtempcomp\fP directive can be used to compensate for the changes +in the temperature and improve the stability and accuracy of the clock. +.sp +The result depends on many factors, including the resolution of the sensor, the +amount of noise in the measurements, the polling interval of the time source, +the compensation update interval, how well the compensation is specified, and +how close the sensor is to the oscillator. When it is working well, the +frequency reported in the \fItracking.log\fP file is more stable and the maximum +reached offset is smaller. +.sp +There are two forms of the directive. The first one has six parameters: a path +to the file containing the current temperature from the sensor (in text +format), the compensation update interval (in seconds), and temperature +coefficients \fIT0\fP, \fIk0\fP, \fIk1\fP, \fIk2\fP. +.sp +The frequency compensation is calculated (in ppm) as +.sp +.if n .RS 4 +.nf +.fam C +comp = k0 + (T \- T0) * k1 + (T \- T0)^2 * k2 +.fam +.fi +.if n .RE +.sp +The result has to be between \-10 ppm and 10 ppm, otherwise the measurement is +considered invalid and will be ignored. The \fIk0\fP coefficient can be adjusted to +keep the compensation in that range. +.sp +An example of the use is: +.sp +.if n .RS 4 +.nf +.fam C +tempcomp /sys/class/hwmon/hwmon0/temp2_input 30 26000 0.0 0.000183 0.0 +.fam +.fi +.if n .RE +.sp +The measured temperature will be read from the file in the Linux sysfs +filesystem every 30 seconds. When the temperature is 26000 (26 degrees +Celsius), the frequency correction will be zero. When it is 27000 (27 degrees +Celsius), the clock will be set to run faster by 0.183 ppm, etc. +.sp +The second form has three parameters: the path to the sensor file, the update +interval, and a path to a file containing a list of (temperature, compensation) +points, from which the compensation is linearly interpolated or extrapolated. +.sp +An example is: +.sp +.if n .RS 4 +.nf +.fam C +tempcomp /sys/class/hwmon/hwmon0/temp2_input 30 /etc/chrony.tempcomp +.fam +.fi +.if n .RE +.sp +where the \fI/etc/chrony.tempcomp\fP file could have +.sp +.if n .RS 4 +.nf +.fam C +20000 1.0 +21000 0.64 +22000 0.36 +23000 0.16 +24000 0.04 +25000 0.0 +26000 0.04 +27000 0.16 +28000 0.36 +29000 0.64 +30000 1.0 +.fam +.fi +.if n .RE +.sp +Valid measurements with corresponding compensations are logged to the +\fItempcomp.log\fP file if enabled by the \fBlog tempcomp\fP directive. +.RE +.SS "NTP server" +.sp +\fBallow\fP [\fBall\fP] [\fIsubnet\fP] +.RS 4 +The \fBallow\fP directive is used to designate a particular subnet from which NTP +clients are allowed to access the computer as an NTP server. It also controls +access of NTS\-KE clients when NTS is enabled on the server. +.sp +The default is that no clients are allowed access, i.e. \fBchronyd\fP operates +purely as an NTP client. If the \fBallow\fP directive is used, \fBchronyd\fP will be +both a client of its servers, and a server to other clients. +.sp +This directive can be used multiple times. +.sp +Examples of the use of the directive are as follows: +.sp +.if n .RS 4 +.nf +.fam C +allow 1.2.3.4 +allow 3.4.5.0/24 +allow 3.4.5 +allow 2001:db8::/32 +allow 0/0 +allow ::/0 +allow +.fam +.fi +.if n .RE +.sp +The first directive allows access from an IPv4 address. The second directive +allows access from all computers in an IPv4 subnet specified in the CIDR +notation. The third directive specifies the same subnet using a simpler +notation where the prefix length is determined by the number of dots. The +fourth directive specifies an IPv6 subnet. The fifth and sixth directives allow +access from all IPv4 and IPv6 addresses respectively. The seventh directive +allows access from all addresses (both IPv4 or IPv6). +.sp +A second form of the directive, \fBallow all\fP, has a greater effect, depending on +the ordering of directives in the configuration file. To illustrate the effect, +consider the two examples: +.sp +.if n .RS 4 +.nf +.fam C +allow 1.2.3.4 +deny 1.2.3.0/24 +allow 1.2.0.0/16 +.fam +.fi +.if n .RE +.sp +and +.sp +.if n .RS 4 +.nf +.fam C +allow 1.2.3.4 +deny 1.2.3.0/24 +allow all 1.2.0.0/16 +.fam +.fi +.if n .RE +.sp +In the first example, the effect is the same regardless of what order the three +directives are given in. So the \fI1.2.0.0/16\fP subnet is allowed access, except +for the \fI1.2.3.0/24\fP subnet, which is denied access, however the host \fI1.2.3.4\fP +is allowed access. +.sp +In the second example, the \fBallow all 1.2.0.0/16\fP directive overrides the +effect of \fIany\fP previous directive relating to a subnet within the specified +subnet. Within a configuration file this capability is probably rather moot; +however, it is of greater use for reconfiguration at run\-time via \fBchronyc\fP +with the \fBallow all\fP command. +.sp +The rules are internally represented as a tree of tables with one level per +four bits of the IPv4 or IPv6 address. The order of the \fBallow\fP and \fBdeny\fP +directives matters if they modify the same records of one table, i.e. if one +subnet is included in the other subnet and their prefix lengths are at the same +level. For example, \fI1.2.3.0/28\fP and \fI1.2.3.0/29\fP are in different tables, but +\fI1.2.3.0/25\fP and \fI1.2.3.0/28\fP are in the same table. The configuration can be +verified for individual addresses with the \fBaccheck\fP +command in \fBchronyc\fP. +.sp +A hostname can be specified in the directives instead of the IP address, but +the name must be resolvable when \fBchronyd\fP is started, i.e. the network is +already up and DNS is working. If the hostname resolves to multiple addresses, +only the first address (in the order returned by the system resolver) will be +allowed or denied. +.sp +Note, if the \fBinitstepslew\fP directive is used in the +configuration file, each of the computers listed in that directive must allow +client access by this computer for it to work. +.RE +.sp +\fBdeny\fP [\fBall\fP] [\fIsubnet\fP] +.RS 4 +This is similar to the \fBallow\fP directive, except that it denies NTP +and NTS\-KE client access to a particular subnet or host, rather than allowing +it. +.sp +The syntax is identical and the directive can be used multiple times too. +.sp +There is also a \fBdeny all\fP directive with similar behaviour to the \fBallow all\fP +directive. +.RE +.sp +\fBbindaddress\fP \fIaddress\fP +.RS 4 +The \fBbindaddress\fP directive binds the sockets on which \fBchronyd\fP listens for +NTP and NTS\-KE requests to a local address of the computer. On systems other +than Linux, the address of the computer needs to be already configured when +\fBchronyd\fP is started. +.sp +An example of the use of the directive is: +.sp +.if n .RS 4 +.nf +.fam C +bindaddress 192.168.1.1 +.fam +.fi +.if n .RE +.sp +Currently, for each of the IPv4 and IPv6 protocols, only one \fBbindaddress\fP +directive can be specified. Therefore, it is not useful on computers which +should serve NTP on multiple network interfaces. +.RE +.sp +\fBbinddevice\fP \fIinterface\fP +.RS 4 +The \fBbinddevice\fP directive binds the NTP and NTS\-KE server sockets to a network +device specified by the interface name. This directive can specify only one +interface and it is supported on Linux only. +.sp +An example of the directive is: +.sp +.if n .RS 4 +.nf +.fam C +binddevice eth0 +.fam +.fi +.if n .RE +.RE +.sp +\fBbroadcast\fP \fIinterval\fP \fIaddress\fP [\fIport\fP] +.RS 4 +The \fBbroadcast\fP directive is used to declare a broadcast address to which +chronyd should send packets in the NTP broadcast mode (i.e. make \fBchronyd\fP act +as a broadcast server). Broadcast clients on that subnet will be able to +synchronise. +.sp +This directive can be used multiple times to specify multiple addresses. +.sp +The syntax is as follows: +.sp +.if n .RS 4 +.nf +.fam C +broadcast 32 192.168.1.255 +broadcast 64 192.168.2.255 12123 +broadcast 64 ff02::101 +.fam +.fi +.if n .RE +.sp +In the first example, the destination port defaults to UDP port 123 (the normal NTP +port). In the second example, the destination port is specified as 12123. The +first parameter in each case (32 or 64 respectively) is the interval in seconds +between broadcast packets being sent. The second parameter in each case is the +broadcast address to send the packet to. This should correspond to the +broadcast address of one of the network interfaces on the computer where +\fBchronyd\fP is running. +.sp +You can have more than 1 \fBbroadcast\fP directive if you have more than 1 network +interface onto which you want to send NTP broadcast packets. +.sp +\fBchronyd\fP itself cannot act as a broadcast client; it must always be configured +as a point\-to\-point client by defining specific NTP servers and peers. This +broadcast server feature is intended for providing a time source to other NTP +implementations. +.sp +If \fBntpd\fP is used as the broadcast client, it will try to measure the +round\-trip delay between the server and client with normal client mode packets. +Thus, the broadcast subnet should also be the subject of an \fBallow\fP +directive. +.RE +.sp +\fBclientloglimit\fP \fIlimit\fP +.RS 4 +This directive specifies the maximum amount of memory that \fBchronyd\fP is allowed +to allocate for logging of client accesses and the state that \fBchronyd\fP as an +NTP server needs to support the interleaved mode for its clients. The default +limit is 524288 bytes, which enables monitoring of up to 4096 IP addresses at +the same time and holding NTP timestamps for up to 4096 clients using the +interleaved mode (depending on uniformity of their polling interval). The +number of addresses and timestamps is always a power of 2. The maximum +effective value is 2147483648 (2 GB), which corresponds to 16777216 addresses +and timestamps. +.sp +An example of the use of this directive is: +.sp +.if n .RS 4 +.nf +.fam C +clientloglimit 1048576 +.fam +.fi +.if n .RE +.RE +.sp +\fBnoclientlog\fP +.RS 4 +This directive, which takes no arguments, specifies that client accesses are +not to be logged. Normally they are logged, allowing statistics to be reported +using the \fBclients\fP command in \fBchronyc\fP. This option +also effectively disables server support for the NTP interleaved mode. +.RE +.sp +\fBlocal\fP [\fIoption\fP]... +.RS 4 +The \fBlocal\fP directive enables a local reference mode, which allows \fBchronyd\fP +operating as an NTP server to appear synchronised to real time (from the +viewpoint of clients polling it), even when it was never synchronised or +the last update of the clock happened a long time ago. +.sp +This directive is normally used in an isolated network, where computers are +required to be synchronised to one another, but not necessarily to real time. +The server can be kept vaguely in line with real time by manual input. +.sp +The \fBlocal\fP directive has the following options: +.sp +\fBstratum\fP \fIstratum\fP +.RS 4 +This option sets the stratum of the server which will be reported to clients +when the local reference is active. The specified value is in the range 1 +through 15, and the default value is 10. It should be larger than the maximum +expected stratum in the network when external NTP servers are accessible. +.sp +Stratum 1 indicates a computer that has a true real\-time reference directly +connected to it (e.g. GPS, atomic clock, etc.), such computers are expected to +be very close to real time. Stratum 2 computers are those which have a stratum +1 server; stratum 3 computers have a stratum 2 server and so on. A value +of 10 indicates that the clock is so many hops away from a reference clock that +its time is fairly unreliable. +.RE +.sp +\fBdistance\fP \fIdistance\fP +.RS 4 +This option sets the threshold for the root distance which will activate the local +reference. If \fBchronyd\fP was synchronised to some source, the local reference +will not be activated until its root distance reaches the specified value (the +rate at which the distance is increasing depends on how well the clock was +tracking the source). The default value is 1 second. +.sp +The current root distance can be calculated from root delay and root dispersion +(reported by the \fBtracking\fP command in \fBchronyc\fP) as: +.sp +.if n .RS 4 +.nf +.fam C +distance = delay / 2 + dispersion +.fam +.fi +.if n .RE +.RE +.sp +\fBorphan\fP +.RS 4 +This option enables a special \(oqorphan\(cq mode, where sources with stratum equal +to the local \fIstratum\fP are assumed to not serve real time. They are ignored +unless no other source is selectable and their reference IDs are smaller than +the local reference ID. +.sp +This allows multiple servers in the network to use the same \fBlocal\fP +configuration and to be synchronised to one another, without confusing clients +that poll more than one server. Each server needs to be configured to poll all +other servers with the \fBlocal\fP directive. This ensures only the server with the +smallest reference ID has the local reference active and others are +synchronised to it. If that server stops responding, the server with the second +smallest reference ID will take over when its local reference mode activates +(root distance reaches the threshold configured by the \fBdistance\fP option). +.sp +The \fBorphan\fP mode is compatible with the \fBntpd\fP\(aqs orphan mode (enabled by the +\fBtos orphan\fP command). +.RE +.RE +.sp + +.RS 4 +.sp +An example of the directive is: +.sp +.if n .RS 4 +.nf +.fam C +local stratum 10 orphan distance 0.1 +.fam +.fi +.if n .RE +.RE +.sp +\fBntpsigndsocket\fP \fIdirectory\fP +.RS 4 +This directive specifies the location of the Samba \fBntp_signd\fP socket when it +is running as a Domain Controller (DC). If \fBchronyd\fP is compiled with this +feature, responses to MS\-SNTP clients will be signed by the \fBsmbd\fP daemon. +.sp +Note that MS\-SNTP requests are not authenticated and any client that is allowed +to access the server by the \fBallow\fP directive, or the +\fBallow\fP command in \fBchronyc\fP, can get an MS\-SNTP +response signed with a trust account\(cqs password and try to crack the password +in a brute\-force attack. Access to the server should be carefully controlled. +.sp +An example of the directive is: +.sp +.if n .RS 4 +.nf +.fam C +ntpsigndsocket /var/lib/samba/ntp_signd +.fam +.fi +.if n .RE +.RE +.sp +\fBntsport\fP \fIport\fP +.RS 4 +This directive specifies the TCP port on which \fBchronyd\fP will provide the NTS +Key Establishment (NTS\-KE) service. The default port is 4460. +.sp +The port will be open only when a certificate and key is specified by the +\fBntsservercert\fP and \fBntsserverkey\fP directives. +.RE +.sp +\fBntsservercert\fP \fIfile\fP +.RS 4 +This directive specifies a file containing a certificate in the PEM format +for \fBchronyd\fP to operate as an NTS server. The file should also include +any intermediate certificates that the clients will need to validate the +server\(cqs certificate. The file needs to be readable by the user under which +\fBchronyd\fP is running after dropping root privileges. +.sp +This directive can be used multiple times to specify multiple certificates for +different names of the server. +.sp +The files are loaded only once. \fBchronyd\fP needs to be restarted in order to +load a renewed certificate. The \fBntsdumpdir\fP and +\fBdumpdir\fP directives with the \fB\-r\fP option of \fBchronyd\fP are +recommended for a near\-seamless server operation. +.RE +.sp +\fBntsserverkey\fP \fIfile\fP +.RS 4 +This directive specifies a file containing a private key in the PEM format +for \fBchronyd\fP to operate as an NTS server. The file needs to be readable by +the user under which \fBchronyd\fP is running after dropping root privileges. For +security reasons, it should not be readable by other users. +.sp +This directive can be used multiple times to specify multiple keys. The number +of keys must be the same as the number of certificates and the corresponding +files must be specified in the same order. +.RE +.sp +\fBntsprocesses\fP \fIprocesses\fP +.RS 4 +This directive specifies how many helper processes will \fBchronyd\fP operating +as an NTS server start for handling client NTS\-KE requests in order to improve +performance with multi\-core CPUs and multithreading. If set to 0, no helper +process will be started and all NTS\-KE requests will be handled by the main +\fBchronyd\fP process. The default value is 1. +.RE +.sp +\fBmaxntsconnections\fP \fIconnections\fP +.RS 4 +This directive specifies the maximum number of concurrent NTS\-KE connections +per process that the NTS server will accept. The default value is 100. The +maximum practical value is half of the system \fBFD_SETSIZE\fP constant (usually +1024). +.RE +.sp +\fBntsdumpdir\fP \fIdirectory\fP +.RS 4 +This directive specifies a directory where \fBchronyd\fP operating as an NTS server +can save the keys which encrypt NTS cookies provided to clients. The keys are +saved to a single file named \fIntskeys\fP. When \fBchronyd\fP is restarted, reloading +the keys allows the clients to continue using old cookies and avoids a storm of +NTS\-KE requests. By default, the server does not save the keys. +.sp +An example of the directive is: +.sp +.if n .RS 4 +.nf +.fam C +ntsdumpdir @CHRONYVARDIR@ +.fam +.fi +.if n .RE +.sp +This directory is used also by the NTS client to save NTS cookies. +.RE +.sp +\fBntsntpserver\fP \fIhostname\fP +.RS 4 +This directive specifies the hostname (as a fully qualified domain name) or +address of the NTP server(s) which is +provided in the NTS\-KE response to the clients. It allows the NTS\-KE server to +be separated from the NTP server. However, the servers need to share the keys, +i.e. external key management needs to be enabled by setting +\fBntsrotate\fP to 0. By default, no hostname or address is provided +to the clients, which means they should use the same server for NTS\-KE and NTP. +.RE +.sp +\fBntsrotate\fP \fIinterval\fP +.RS 4 +This directive specifies the rotation interval (in seconds) of the server key +which encrypts the NTS cookies. New keys are generated automatically from the +\fI/dev/urandom\fP device. The server keeps two previous keys to give the clients +time to get new cookies encrypted by the latest key. The interval is measured +as the server\(cqs operating time, i.e. the actual interval can be longer if +\fBchronyd\fP is not running continuously. The default interval is 604800 seconds +(1 week). The maximum value is 2^31\-1 (68 years). +.sp +The automatic rotation of the keys can be disabled by setting \fBntsrotate\fP to 0. +In this case the keys are assumed to be managed externally. \fBchronyd\fP will not +save the keys to the \fIntskeys\fP file and will reload the keys from the file when +the \fBrekey\fP command is issued in \fBchronyc\fP. The file can +be periodically copied from another server running \fBchronyd\fP (which does +not have \fBntsrotate\fP set to 0) in order to have one or more servers dedicated +to NTS\-KE. The NTS\-KE servers need to be configured with the +\fBntsntpserver\fP directive to point the clients to the right NTP +server. +.sp +An example of the directive is: +.sp +.if n .RS 4 +.nf +.fam C +ntsrotate 2592000 +.fam +.fi +.if n .RE +.RE +.sp +\fBport\fP \fIport\fP +.RS 4 +This option allows you to configure the port on which \fBchronyd\fP will listen for +NTP requests. The port will be open only when an address is allowed by the +\fBallow\fP directive or the \fBallow\fP command in +\fBchronyc\fP, an NTP peer is configured, or the broadcast server mode is enabled. +.sp +The default value is 123, the standard NTP port. If set to 0, \fBchronyd\fP will +never open the server port and will operate strictly in a client\-only mode. The +source port used in NTP client requests can be set by the +\fBacquisitionport\fP directive. +.RE +.sp +\fBratelimit\fP [\fIoption\fP]... +.RS 4 +This directive enables response rate limiting for NTP packets. Its purpose is +to reduce network traffic with misconfigured or broken NTP clients that are +polling the server too frequently. The limits are applied to individual IP +addresses. If multiple clients share one IP address (e.g. multiple hosts behind +NAT), the sum of their traffic will be limited. If a client that increases its +polling rate when it does not receive a reply is detected, its rate limiting +will be temporarily suspended to avoid increasing the overall amount of +traffic. The maximum number of IP addresses which can be monitored at the same +time depends on the memory limit set by the \fBclientloglimit\fP +directive. +.sp +The \fBratelimit\fP directive supports a number of options (which can be defined +in any order): +.sp +\fBinterval\fP \fIinterval\fP +.RS 4 +This option sets the minimum interval between responses. It is defined as a +power of 2 in seconds. The default value is 3 (8 seconds). The minimum value +is \-19 (524288 packets per second) and the maximum value is 12 (one packet per +4096 seconds). Note that with values below \-4 the rate limiting is coarse +(responses are allowed in bursts, even if the interval between them is shorter +than the specified interval). +.RE +.sp +\fBburst\fP \fIresponses\fP +.RS 4 +This option sets the maximum number of responses that can be sent in a burst, +temporarily exceeding the limit specified by the \fBinterval\fP option. This is +useful for clients that make rapid measurements on start (e.g. \fBchronyd\fP with +the \fBiburst\fP option). The default value is 8. The minimum value is 1 and the +maximum value is 255. +.RE +.sp +\fBleak\fP \fIrate\fP +.RS 4 +This option sets the rate at which responses are randomly allowed even if the +limits specified by the \fBinterval\fP and \fBburst\fP options are exceeded. This is +necessary to prevent an attacker who is sending requests with a spoofed +source address from completely blocking responses to that address. The leak +rate is defined as a power of 1/2 and it is 2 by default, i.e. on average at +least every fourth request has a response. The minimum value is 1 and the +maximum value is 4. +.RE +.RE +.sp + +.RS 4 +.sp +An example use of the directive is: +.sp +.if n .RS 4 +.nf +.fam C +ratelimit interval 1 burst 16 +.fam +.fi +.if n .RE +.sp +This would reduce the response rate for IP addresses sending packets on average +more than once per 2 seconds, or sending packets in bursts of more than 16 +packets, by up to 75% (with default \fBleak\fP of 2). +.RE +.sp +\fBntsratelimit\fP [\fIoption\fP]... +.RS 4 +This directive enables rate limiting of NTS\-KE requests. It is similar to the +\fBratelimit\fP directive, except the default interval is 6 +(1 connection per 64 seconds). +.sp +An example of the use of the directive is: +.sp +.if n .RS 4 +.nf +.fam C +ntsratelimit interval 3 burst 1 +.fam +.fi +.if n .RE +.RE +.sp +\fBsmoothtime\fP \fImax\-freq\fP \fImax\-wander\fP [\fBleaponly\fP] +.RS 4 +The \fBsmoothtime\fP directive can be used to enable smoothing of the time that +\fBchronyd\fP serves to its clients to make it easier for them to track it and keep +their clocks close together even when large offset or frequency corrections are +applied to the server\(cqs clock, for example after being offline for a longer +time. +.sp +BE WARNED: The server is intentionally not serving its best estimate of the +true time. If a large offset has been accumulated, it can take a very long time +to smooth it out. This directive should be used only when the clients are not +configured to also poll another NTP server, because they could reject this +server as a falseticker or fail to select a source completely. +.sp +The smoothing process is implemented with a quadratic spline function with two +or three pieces. It is independent from any slewing applied to the local system +clock, but the accumulated offset and frequency will be reset when the clock is +corrected by stepping, e.g. by the \fBmakestep\fP directive or the +\fBmakestep\fP command in \fBchronyc\fP. The process can be +reset without stepping the clock by the \fBsmoothtime +reset\fP command. +.sp +The first two arguments of the directive are the maximum frequency offset of +the smoothed time to the tracked NTP time (in ppm) and the maximum rate at +which the frequency offset is allowed to change (in ppm per second). \fBleaponly\fP +is an optional third argument which enables a mode where only leap seconds are +smoothed out and normal offset and frequency changes are ignored. The \fBleaponly\fP +option is useful in a combination with the \fBleapsecmode slew\fP +directive to allow the clients to use multiple time smoothing servers safely. +.sp +The smoothing process is activated automatically when 1/10000 of the estimated +skew of the local clock falls below the maximum rate of frequency change. It +can be also activated manually by the \fBsmoothtime +activate\fP command, which is particularly useful when the clock is +synchronised only with manual input and the skew is always larger than the +threshold. The \fBsmoothing\fP command can be used to +monitor the process. +.sp +An example suitable for clients using \fBntpd\fP and 1024 second polling interval +could be: +.sp +.if n .RS 4 +.nf +.fam C +smoothtime 400 0.001 +.fam +.fi +.if n .RE +.sp +An example suitable for clients using \fBchronyd\fP on Linux could be: +.sp +.if n .RS 4 +.nf +.fam C +smoothtime 50000 0.01 +.fam +.fi +.if n .RE +.RE +.SS "Command and monitoring access" +.sp +\fBbindcmdaddress\fP \fIaddress\fP +.RS 4 +The \fBbindcmdaddress\fP directive specifies a local IP address to which \fBchronyd\fP +will bind the UDP socket listening for monitoring command packets (issued +by \fBchronyc\fP). On systems other than Linux, the address of the interface needs +to be already configured when \fBchronyd\fP is started. +.sp +This directive can also change the path of the Unix domain command socket, +which is used by \fBchronyc\fP to send configuration commands. The socket must be +in a directory that is accessible only by the root or \fIchrony\fP user. The +directory will be created on start if it does not exist. The compiled\-in default +path of the socket is \fI@CHRONYRUNDIR@/chronyd.sock\fP. The socket can be +disabled by setting the path to \fI/\fP. +.sp +By default, \fBchronyd\fP binds the UDP sockets to the addresses \fI127.0.0.1\fP and +\fI::1\fP (i.e. the loopback interface). This blocks all access except from +localhost. To listen for command packets on all interfaces, you can add the +lines: +.sp +.if n .RS 4 +.nf +.fam C +bindcmdaddress 0.0.0.0 +bindcmdaddress :: +.fam +.fi +.if n .RE +.sp +to the configuration file. +.sp +For each of the IPv4, IPv6, and Unix domain protocols, only one +\fBbindcmdaddress\fP directive can be specified. +.sp +An example that sets the path of the Unix domain command socket is: +.sp +.if n .RS 4 +.nf +.fam C +bindcmdaddress /var/run/chrony/chronyd.sock +.fam +.fi +.if n .RE +.RE +.sp +\fBbindcmddevice\fP \fIinterface\fP +.RS 4 +The \fBbindcmddevice\fP directive binds the UDP command sockets to a network device +specified by the interface name. This directive can specify only one interface +and it is supported on Linux only. +.sp +An example of the directive is: +.sp +.if n .RS 4 +.nf +.fam C +bindcmddevice eth0 +.fam +.fi +.if n .RE +.RE +.sp +\fBcmdallow\fP [\fBall\fP] [\fIsubnet\fP] +.RS 4 +This is similar to the \fBallow\fP directive, except that it allows +monitoring access (rather than NTP client access) to a particular subnet or +host. (By \(oqmonitoring access\(cq is meant that \fBchronyc\fP can be run on those +hosts and retrieve monitoring data from \fBchronyd\fP on this computer.) +.sp +The syntax is identical to the \fBallow\fP directive. +.sp +There is also a \fBcmdallow all\fP directive with similar behaviour to the \fBallow +all\fP directive (but applying to monitoring access in this case, of course). +.sp +Note that \fBchronyd\fP has to be configured with the +\fBbindcmdaddress\fP directive to not listen only on the +loopback interface to actually allow remote access. +.RE +.sp +\fBcmddeny\fP [\fBall\fP] [\fIsubnet\fP] +.RS 4 +This is similar to the \fBcmdallow\fP directive, except that it denies +monitoring access to a particular subnet or host, rather than allowing it. +.sp +The syntax is identical. +.sp +There is also a \fBcmddeny all\fP directive with similar behaviour to the \fBcmdallow +all\fP directive. +.RE +.sp +\fBcmdport\fP \fIport\fP +.RS 4 +The \fBcmdport\fP directive allows the port that is used for run\-time monitoring +(via the \fBchronyc\fP program) to be altered from its default (323). If set to 0, +\fBchronyd\fP will not open the port, this is useful to disable \fBchronyc\fP +access from the Internet. (It does not disable the Unix domain command socket.) +.sp +An example shows the syntax: +.sp +.if n .RS 4 +.nf +.fam C +cmdport 257 +.fam +.fi +.if n .RE +.sp +This would make \fBchronyd\fP use UDP 257 as its command port. (\fBchronyc\fP would +need to be run with the \fB\-p 257\fP switch to inter\-operate correctly.) +.RE +.sp +\fBcmdratelimit\fP [\fIoption\fP]... +.RS 4 +This directive enables response rate limiting for command packets. It is +similar to the \fBratelimit\fP directive, except responses to +localhost are never limited and the default interval is \-4 (16 packets per +second). +.sp +An example of the use of the directive is: +.sp +.if n .RS 4 +.nf +.fam C +cmdratelimit interval 2 +.fam +.fi +.if n .RE +.RE +.SS "Real\-time clock (RTC)" +.sp +\fBhwclockfile\fP \fIfile\fP +.RS 4 +The \fBhwclockfile\fP directive sets the location of the adjtime file which is +used by the \fBhwclock\fP program on Linux. \fBchronyd\fP parses the file to find out +if the RTC keeps local time or UTC. It overrides the \fBrtconutc\fP +directive. +.sp +The compiled\-in default value is \(aq\fI@DEFAULT_HWCLOCK_FILE@\fP\(aq. +.sp +An example of the directive is: +.sp +.if n .RS 4 +.nf +.fam C +hwclockfile /etc/adjtime +.fam +.fi +.if n .RE +.RE +.sp +\fBrtcautotrim\fP \fIthreshold\fP +.RS 4 +The \fBrtcautotrim\fP directive is used to keep the RTC close to the system clock +automatically. When the system clock is synchronised and the estimated error +between the two clocks is larger than the specified threshold, \fBchronyd\fP will +trim the RTC as if the \fBtrimrtc\fP command in \fBchronyc\fP +was issued. The trimming operation is accurate to only about 1 second, which is +the minimum effective threshold. +.sp +This directive is effective only with the \fBrtcfile\fP directive. +.sp +An example of the use of this directive is: +.sp +.if n .RS 4 +.nf +.fam C +rtcautotrim 30 +.fam +.fi +.if n .RE +.sp +This would set the threshold error to 30 seconds. +.RE +.sp +\fBrtcdevice\fP \fIdevice\fP +.RS 4 +The \fBrtcdevice\fP directive sets the path to the device file for accessing the +RTC. The default path is \fI@DEFAULT_RTC_DEVICE@\fP. +.RE +.sp +\fBrtcfile\fP \fIfile\fP +.RS 4 +The \fBrtcfile\fP directive defines the name of the file in which \fBchronyd\fP can +save parameters associated with tracking the accuracy of the RTC. +.sp +An example of the directive is: +.sp +.if n .RS 4 +.nf +.fam C +rtcfile @CHRONYVARDIR@/rtc +.fam +.fi +.if n .RE +.sp +\fBchronyd\fP saves information in this file when it exits and when the \fBwritertc\fP +command is issued in \fBchronyc\fP. The information saved is the RTC\(cqs error at +some epoch, that epoch (in seconds since January 1 1970), and the rate at which +the RTC gains or loses time. +.sp +So far, the support for real\-time clocks is limited; their code is even more +system\-specific than the rest of the software. You can only use the RTC +facilities (the \fBrtcfile\fP directive and the \fB\-s\fP command\-line +option to \fBchronyd\fP) if the following three conditions apply: +.sp +.RS 4 +.ie n \{\ +\h'-04' 1.\h'+01'\c +.\} +.el \{\ +. sp -1 +. IP " 1." 4.2 +.\} +You are running Linux. +.RE +.sp +.RS 4 +.ie n \{\ +\h'-04' 2.\h'+01'\c +.\} +.el \{\ +. sp -1 +. IP " 2." 4.2 +.\} +The kernel is compiled with extended real\-time clock support (i.e. the +\fI/dev/rtc\fP device is capable of doing useful things). +.RE +.sp +.RS 4 +.ie n \{\ +\h'-04' 3.\h'+01'\c +.\} +.el \{\ +. sp -1 +. IP " 3." 4.2 +.\} +You do not have other applications that need to make use of \fI/dev/rtc\fP at all. +.RE +.RE +.sp +\fBrtconutc\fP +.RS 4 +\fBchronyd\fP assumes by default that the RTC keeps local time (including any +daylight saving changes). This is convenient on PCs running Linux which are +dual\-booted with Windows. +.sp +If you keep the RTC on local time and your computer is off when daylight saving +(summer time) starts or ends, the computer\(cqs system time will be one hour in +error when you next boot and start chronyd. +.sp +An alternative is for the RTC to keep Universal Coordinated Time (UTC). This +does not suffer from the 1 hour problem when daylight saving starts or ends. +.sp +If the \fBrtconutc\fP directive appears, it means the RTC is required to keep UTC. +The directive takes no arguments. It is equivalent to specifying the \fB\-u\fP +switch to the Linux \fBhwclock\fP program. +.sp +Note that this setting is overridden by the \fBhwclockfile\fP file +and is not relevant for the \fBrtcsync\fP directive. +.RE +.sp +\fBrtcsync\fP +.RS 4 +The \fBrtcsync\fP directive enables a mode where the system time is periodically +copied to the RTC and \fBchronyd\fP does not try to track its drift. This directive +cannot be used with the \fBrtcfile\fP directive. +.sp +On Linux, the RTC copy is performed by the kernel every 11 minutes. +.sp +On macOS, \fBchronyd\fP will perform the RTC copy every 60 minutes +when the system clock is in a synchronised state. +.sp +On other systems this directive does nothing. +.RE +.SS "Logging" +.sp +\fBlog\fP [\fIoption\fP]... +.RS 4 +The \fBlog\fP directive indicates that certain information is to be logged. +The log files are written to the directory specified by the \fBlogdir\fP +directive. A banner is periodically written to the files to indicate the +meanings of the columns. +.sp +\fBrawmeasurements\fP +.RS 4 +This option logs the raw NTP measurements and related information to a file +called \fImeasurements.log\fP. An entry is made for each packet received from the +source. This can be useful when debugging a problem. An example line (which +actually appears as a single line in the file) from the log file is shown +below. +.sp +.if n .RS 4 +.nf +.fam C +2016\-11\-09 05:40:50 203.0.113.15 N 2 111 111 1111 10 10 1.0 \(rs + \-4.966e\-03 2.296e\-01 1.577e\-05 1.615e\-01 7.446e\-03 CB00717B 4B D K +.fam +.fi +.if n .RE +.sp +The columns are as follows (the quantities in square brackets are the values +from the example line above): +.sp +.RS 4 +.ie n \{\ +\h'-04' 1.\h'+01'\c +.\} +.el \{\ +. sp -1 +. IP " 1." 4.2 +.\} +Date [2015\-10\-13] +.RE +.sp +.RS 4 +.ie n \{\ +\h'-04' 2.\h'+01'\c +.\} +.el \{\ +. sp -1 +. IP " 2." 4.2 +.\} +Hour:Minute:Second. Note that the date\-time pair is expressed in UTC, not the +local time zone. [05:40:50] +.RE +.sp +.RS 4 +.ie n \{\ +\h'-04' 3.\h'+01'\c +.\} +.el \{\ +. sp -1 +. IP " 3." 4.2 +.\} +IP address of server or peer from which measurement came [203.0.113.15] +.RE +.sp +.RS 4 +.ie n \{\ +\h'-04' 4.\h'+01'\c +.\} +.el \{\ +. sp -1 +. IP " 4." 4.2 +.\} +Leap status (\fIN\fP means normal, \fI+\fP means that the last minute of the current +month has 61 seconds, \fI\-\fP means that the last minute of the month has 59 +seconds, \fI?\fP means the remote computer is not currently synchronised.) [N] +.RE +.sp +.RS 4 +.ie n \{\ +\h'-04' 5.\h'+01'\c +.\} +.el \{\ +. sp -1 +. IP " 5." 4.2 +.\} +Stratum of remote computer. [2] +.RE +.sp +.RS 4 +.ie n \{\ +\h'-04' 6.\h'+01'\c +.\} +.el \{\ +. sp -1 +. IP " 6." 4.2 +.\} +RFC 5905 tests 1 through 3 (1=pass, 0=fail) [111] +.RE +.sp +.RS 4 +.ie n \{\ +\h'-04' 7.\h'+01'\c +.\} +.el \{\ +. sp -1 +. IP " 7." 4.2 +.\} +RFC 5905 tests 5 through 7 (1=pass, 0=fail) [111] +.RE +.sp +.RS 4 +.ie n \{\ +\h'-04' 8.\h'+01'\c +.\} +.el \{\ +. sp -1 +. IP " 8." 4.2 +.\} +Results of the \fBmaxdelay\fP, \fBmaxdelayratio\fP, and \fBmaxdelaydevratio\fP (or +\fBmaxdelayquant\fP) tests, and a test for synchronisation loop (1=pass, +0=fail). The first test from these four also checks the server precision, +response time, and whether an interleaved response is acceptable for +synchronisation. [1111] +.RE +.sp +.RS 4 +.ie n \{\ +\h'-04' 9.\h'+01'\c +.\} +.el \{\ +. sp -1 +. IP " 9." 4.2 +.\} +Local poll [10] +.RE +.sp +.RS 4 +.ie n \{\ +\h'-04' 10.\h'+01'\c +.\} +.el \{\ +. sp -1 +. IP " 10." 4.2 +.\} +Remote poll [10] +.RE +.sp +.RS 4 +.ie n \{\ +\h'-04' 11.\h'+01'\c +.\} +.el \{\ +. sp -1 +. IP " 11." 4.2 +.\} +\(oqScore\(cq (an internal score within each polling level used to decide when to +increase or decrease the polling level. This is adjusted based on number of +measurements currently being used for the regression algorithm). [1.0] +.RE +.sp +.RS 4 +.ie n \{\ +\h'-04' 12.\h'+01'\c +.\} +.el \{\ +. sp -1 +. IP " 12." 4.2 +.\} +The estimated local clock error (\fItheta\fP in RFC 5905). Positive indicates +that the local clock is slow of the remote source. [\-4.966e\-03] +.RE +.sp +.RS 4 +.ie n \{\ +\h'-04' 13.\h'+01'\c +.\} +.el \{\ +. sp -1 +. IP " 13." 4.2 +.\} +The peer delay (\fIdelta\fP in RFC 5905). [2.296e\-01] +.RE +.sp +.RS 4 +.ie n \{\ +\h'-04' 14.\h'+01'\c +.\} +.el \{\ +. sp -1 +. IP " 14." 4.2 +.\} +The peer dispersion (\fIepsilon\fP in RFC 5905). [1.577e\-05] +.RE +.sp +.RS 4 +.ie n \{\ +\h'-04' 15.\h'+01'\c +.\} +.el \{\ +. sp -1 +. IP " 15." 4.2 +.\} +The root delay (\fIDELTA\fP in RFC 5905). [1.615e\-01] +.RE +.sp +.RS 4 +.ie n \{\ +\h'-04' 16.\h'+01'\c +.\} +.el \{\ +. sp -1 +. IP " 16." 4.2 +.\} +The root dispersion (\fIEPSILON\fP in RFC 5905). [7.446e\-03] +.RE +.sp +.RS 4 +.ie n \{\ +\h'-04' 17.\h'+01'\c +.\} +.el \{\ +. sp -1 +. IP " 17." 4.2 +.\} +Reference ID of the server\(cqs source as a hexadecimal number. [CB00717B] +.RE +.sp +.RS 4 +.ie n \{\ +\h'-04' 18.\h'+01'\c +.\} +.el \{\ +. sp -1 +. IP " 18." 4.2 +.\} +NTP mode of the received packet (\fI1\fP=active peer, \fI2\fP=passive peer, +\fI4\fP=server, \fIB\fP=basic, \fII\fP=interleaved). [4B] +.RE +.sp +.RS 4 +.ie n \{\ +\h'-04' 19.\h'+01'\c +.\} +.el \{\ +. sp -1 +. IP " 19." 4.2 +.\} +Source of the local transmit timestamp +(\fID\fP=daemon, \fIK\fP=kernel, \fIH\fP=hardware). [D] +.RE +.sp +.RS 4 +.ie n \{\ +\h'-04' 20.\h'+01'\c +.\} +.el \{\ +. sp -1 +. IP " 20." 4.2 +.\} +Source of the local receive timestamp +(\fID\fP=daemon, \fIK\fP=kernel, \fIH\fP=hardware). [K] +.RE +.RE +.sp +\fBmeasurements\fP +.RS 4 +This option is identical to the \fBrawmeasurements\fP option, except it logs only +valid measurements from synchronised sources, i.e. measurements which passed +the RFC 5905 tests 1 through 7. This can be useful for producing graphs of the +source\(cqs performance. +.RE +.sp +\fBstatistics\fP +.RS 4 +This option logs information about the regression processing to a file called +\fIstatistics.log\fP. An example line (which actually appears as a single line in +the file) from the log file is shown below. +.sp +.if n .RS 4 +.nf +.fam C +2016\-08\-10 05:40:50 203.0.113.15 6.261e\-03 \-3.247e\-03 \(rs + 2.220e\-03 1.874e\-06 1.080e\-06 7.8e\-02 16 0 8 0.00 +.fam +.fi +.if n .RE +.sp +The columns are as follows (the quantities in square brackets are the values +from the example line above): +.sp +.RS 4 +.ie n \{\ +\h'-04' 1.\h'+01'\c +.\} +.el \{\ +. sp -1 +. IP " 1." 4.2 +.\} +Date [2015\-07\-22] +.RE +.sp +.RS 4 +.ie n \{\ +\h'-04' 2.\h'+01'\c +.\} +.el \{\ +. sp -1 +. IP " 2." 4.2 +.\} +Hour:Minute:Second. Note that the date\-time pair is expressed in +UTC, not the local time zone. [05:40:50] +.RE +.sp +.RS 4 +.ie n \{\ +\h'-04' 3.\h'+01'\c +.\} +.el \{\ +. sp -1 +. IP " 3." 4.2 +.\} +IP address of server or peer from which measurement comes [203.0.113.15] +.RE +.sp +.RS 4 +.ie n \{\ +\h'-04' 4.\h'+01'\c +.\} +.el \{\ +. sp -1 +. IP " 4." 4.2 +.\} +The estimated standard deviation of the measurements from the source (in +seconds). [6.261e\-03] +.RE +.sp +.RS 4 +.ie n \{\ +\h'-04' 5.\h'+01'\c +.\} +.el \{\ +. sp -1 +. IP " 5." 4.2 +.\} +The estimated offset of the source (in seconds, positive means the local +clock is estimated to be fast, in this case). [\-3.247e\-03] +.RE +.sp +.RS 4 +.ie n \{\ +\h'-04' 6.\h'+01'\c +.\} +.el \{\ +. sp -1 +. IP " 6." 4.2 +.\} +The estimated standard deviation of the offset estimate (in seconds). +[2.220e\-03] +.RE +.sp +.RS 4 +.ie n \{\ +\h'-04' 7.\h'+01'\c +.\} +.el \{\ +. sp -1 +. IP " 7." 4.2 +.\} +The estimated rate at which the local clock is gaining or losing time +relative to the source (in seconds per second, positive means the local clock +is gaining). This is relative to the compensation currently being applied to +the local clock, \fInot\fP to the local clock without any compensation. +[1.874e\-06] +.RE +.sp +.RS 4 +.ie n \{\ +\h'-04' 8.\h'+01'\c +.\} +.el \{\ +. sp -1 +. IP " 8." 4.2 +.\} +The estimated error in the rate value (in seconds per second). [1.080e\-06]. +.RE +.sp +.RS 4 +.ie n \{\ +\h'-04' 9.\h'+01'\c +.\} +.el \{\ +. sp -1 +. IP " 9." 4.2 +.\} +The ratio of |old_rate \- new_rate| / old_rate_error. Large values +indicate the statistics are not modelling the source very well. [7.8e\-02] +.RE +.sp +.RS 4 +.ie n \{\ +\h'-04' 10.\h'+01'\c +.\} +.el \{\ +. sp -1 +. IP " 10." 4.2 +.\} +The number of measurements currently being used for the regression +algorithm. [16] +.RE +.sp +.RS 4 +.ie n \{\ +\h'-04' 11.\h'+01'\c +.\} +.el \{\ +. sp -1 +. IP " 11." 4.2 +.\} +The new starting index (the oldest sample has index 0; this is the method +used to prune old samples when it no longer looks like the measurements fit a +linear model). [0, i.e. no samples discarded this time] +.RE +.sp +.RS 4 +.ie n \{\ +\h'-04' 12.\h'+01'\c +.\} +.el \{\ +. sp -1 +. IP " 12." 4.2 +.\} +The number of runs. The number of runs of regression residuals with the same +sign is computed. If this is too small it indicates that the measurements are +no longer represented well by a linear model and that some older samples need +to be discarded. The number of runs for the data that is being retained is +tabulated. Values of approximately half the number of samples are expected. +[8] +.RE +.sp +.RS 4 +.ie n \{\ +\h'-04' 13.\h'+01'\c +.\} +.el \{\ +. sp -1 +. IP " 13." 4.2 +.\} +The estimated or configured asymmetry of network jitter on the path to the +source which was used to correct the measured offsets. The asymmetry can be +between \-0.5 and +0.5. A negative value means the delay of packets sent to +the source is more variable than the delay of packets sent from the source +back. [0.00, i.e. no correction for asymmetry] +.RE +.RE +.sp +\fBselection\fP +.RS 4 +This option logs information about selection of sources for synchronisation to +a file called \fIselection.log\fP. Note that the rate of entries written to this +file grows quadratically with the number of specified sources (each measurement +triggers the selection for all sources). An example line (which actually +appears as a single line in the file) from the log file is shown below. +.sp +.if n .RS 4 +.nf +.fam C +2022\-05\-01 02:01:20 203.0.113.15 * \-\-\-\-\- 377 1.00 \(rs + 4.228e+01 \-1.575e\-04 1.239e\-04 +.fam +.fi +.if n .RE +.sp +The columns are as follows (the quantities in square brackets are the values +from the example line above): +.sp +.RS 4 +.ie n \{\ +\h'-04' 1.\h'+01'\c +.\} +.el \{\ +. sp -1 +. IP " 1." 4.2 +.\} +Date [2022\-05\-01] +.RE +.sp +.RS 4 +.ie n \{\ +\h'-04' 2.\h'+01'\c +.\} +.el \{\ +. sp -1 +. IP " 2." 4.2 +.\} +Hour:Minute:Second. Note that the date\-time pair is expressed in +UTC, not the local time zone. [02:01:20] +.RE +.sp +.RS 4 +.ie n \{\ +\h'-04' 3.\h'+01'\c +.\} +.el \{\ +. sp -1 +. IP " 3." 4.2 +.\} +IP address or reference ID of the source. [203.0.113.15] +.RE +.sp +.RS 4 +.ie n \{\ +\h'-04' 4.\h'+01'\c +.\} +.el \{\ +. sp -1 +. IP " 4." 4.2 +.\} +State of the source indicated with one of the following symbols. [*] +.sp + +.RS 4 +Not considered selectable for synchronisation: +.sp +.RS 4 +.ie n \{\ +\h'-04'\(bu\h'+03'\c +.\} +.el \{\ +. sp -1 +. IP \(bu 2.3 +.\} +\fIN\fP \- has the \fBnoselect\fP option. +.RE +.sp +.RS 4 +.ie n \{\ +\h'-04'\(bu\h'+03'\c +.\} +.el \{\ +. sp -1 +. IP \(bu 2.3 +.\} +\fIs\fP \- is not synchronised. +.RE +.sp +.RS 4 +.ie n \{\ +\h'-04'\(bu\h'+03'\c +.\} +.el \{\ +. sp -1 +. IP \(bu 2.3 +.\} +\fIM\fP \- does not have enough measurements. +.RE +.sp +.RS 4 +.ie n \{\ +\h'-04'\(bu\h'+03'\c +.\} +.el \{\ +. sp -1 +. IP \(bu 2.3 +.\} +\fId\fP \- has a root distance larger than the maximum distance (configured by the +\fBmaxdistance\fP directive). +.RE +.sp +.RS 4 +.ie n \{\ +\h'-04'\(bu\h'+03'\c +.\} +.el \{\ +. sp -1 +. IP \(bu 2.3 +.\} +\fI~\fP \- has a jitter larger than the maximum jitter (configured by the +\fBmaxjitter\fP directive). +.RE +.sp +.RS 4 +.ie n \{\ +\h'-04'\(bu\h'+03'\c +.\} +.el \{\ +. sp -1 +. IP \(bu 2.3 +.\} +\fIw\fP \- waits for other sources to get out of the \fIM\fP state. +.RE +.sp +.RS 4 +.ie n \{\ +\h'-04'\(bu\h'+03'\c +.\} +.el \{\ +. sp -1 +. IP \(bu 2.3 +.\} +\fIS\fP \- has older measurements than other sources. +.RE +.sp +.RS 4 +.ie n \{\ +\h'-04'\(bu\h'+03'\c +.\} +.el \{\ +. sp -1 +. IP \(bu 2.3 +.\} +\fIO\fP \- has a stratum equal or larger than the orphan stratum (configured by +the \fBlocal\fP directive). +.RE +.sp +.RS 4 +.ie n \{\ +\h'-04'\(bu\h'+03'\c +.\} +.el \{\ +. sp -1 +. IP \(bu 2.3 +.\} +\fIT\fP \- does not fully agree with sources that have the \fBtrust\fP option. +.RE +.sp +.RS 4 +.ie n \{\ +\h'-04'\(bu\h'+03'\c +.\} +.el \{\ +. sp -1 +. IP \(bu 2.3 +.\} +\fIx\fP \- does not agree with other sources (falseticker). +.RE +.RE +.sp + +.RS 4 +Considered selectable for synchronisation, but not currently used: +.sp +.RS 4 +.ie n \{\ +\h'-04'\(bu\h'+03'\c +.\} +.el \{\ +. sp -1 +. IP \(bu 2.3 +.\} +\fIW\fP \- waits for other sources to be selectable (required by the +\fBminsources\fP directive, or the \fBrequire\fP option of +another source). +.RE +.sp +.RS 4 +.ie n \{\ +\h'-04'\(bu\h'+03'\c +.\} +.el \{\ +. sp -1 +. IP \(bu 2.3 +.\} +\fIP\fP \- another selectable source is preferred due to the \fBprefer\fP option. +.RE +.sp +.RS 4 +.ie n \{\ +\h'-04'\(bu\h'+03'\c +.\} +.el \{\ +. sp -1 +. IP \(bu 2.3 +.\} +\fIU\fP \- waits for a new measurement (after selecting a different best source). +.RE +.sp +.RS 4 +.ie n \{\ +\h'-04'\(bu\h'+03'\c +.\} +.el \{\ +. sp -1 +. IP \(bu 2.3 +.\} +\fID\fP \- has, or recently had, a root distance which is too large to be combined +with other sources (configured by the \fBcombinelimit\fP +directive). +.RE +.RE +.sp + +.RS 4 +Used for synchronisation of the local clock: +.sp +.RS 4 +.ie n \{\ +\h'-04'\(bu\h'+03'\c +.\} +.el \{\ +. sp -1 +. IP \(bu 2.3 +.\} +\fI+\fP \- combined with the best source. +.RE +.sp +.RS 4 +.ie n \{\ +\h'-04'\(bu\h'+03'\c +.\} +.el \{\ +. sp -1 +. IP \(bu 2.3 +.\} +\fI*\fP \- selected as the best source to update the reference data (e.g. root +delay, root dispersion). +.RE +.RE +.RE +.sp +.RS 4 +.ie n \{\ +\h'-04' 5.\h'+01'\c +.\} +.el \{\ +. sp -1 +. IP " 5." 4.2 +.\} +Reachability register printed as an octal number. The register has 8 bits and +is updated on every received or missed packet from the source. A value of 377 +indicates that a valid reply was received for all from the last eight +transmissions. [377] +.RE +.sp +.RS 4 +.ie n \{\ +\h'-04' 6.\h'+01'\c +.\} +.el \{\ +. sp -1 +. IP " 6." 4.2 +.\} +Current score against the source in the \fI*\fP state. The scoring system avoids +frequent reselection when multiple sources have a similar root distance. A +value larger than 1 indicates this source was better than the \fI*\fP source in +recent selections. If the score reaches 10, the best source will be reselected +and the scores will be reset to 1. [1.00] +.RE +.sp +.RS 4 +.ie n \{\ +\h'-04' 7.\h'+01'\c +.\} +.el \{\ +. sp -1 +. IP " 7." 4.2 +.\} +Interval since the last measurement of the source in seconds. [4.228e+01] +.RE +.sp +.RS 4 +.ie n \{\ +\h'-04' 8.\h'+01'\c +.\} +.el \{\ +. sp -1 +. IP " 8." 4.2 +.\} +Lower endpoint of the interval which was expected to contain the true offset +of the local clock determined by the root distance of the source. [\-1.575e\-04] +.RE +.sp +.RS 4 +.ie n \{\ +\h'-04' 9.\h'+01'\c +.\} +.el \{\ +. sp -1 +. IP " 9." 4.2 +.\} +Upper endpoint of the interval which was expected to contain the true offset +of the local clock determined by the root distance of the source. [1.239e\-04] +.RE +.RE +.sp +\fBtracking\fP +.RS 4 +This option logs changes to the estimate of the system\(cqs gain or loss rate, and +any slews made, to a file called \fItracking.log\fP. An example line (which +actually appears as a single line in the file) from the log file is shown +below. +.sp +.if n .RS 4 +.nf +.fam C +2017\-08\-22 13:22:36 203.0.113.15 2 \-3.541 0.075 \-8.621e\-06 N \(rs + 2 2.940e\-03 \-2.084e\-04 1.534e\-02 3.472e\-04 8.304e\-03 +.fam +.fi +.if n .RE +.sp +The columns are as follows (the quantities in square brackets are the +values from the example line above) : +.sp +.RS 4 +.ie n \{\ +\h'-04' 1.\h'+01'\c +.\} +.el \{\ +. sp -1 +. IP " 1." 4.2 +.\} +Date [2017\-08\-22] +.RE +.sp +.RS 4 +.ie n \{\ +\h'-04' 2.\h'+01'\c +.\} +.el \{\ +. sp -1 +. IP " 2." 4.2 +.\} +Hour:Minute:Second. Note that the date\-time pair is expressed in UTC, not the +local time zone. [13:22:36] +.RE +.sp +.RS 4 +.ie n \{\ +\h'-04' 3.\h'+01'\c +.\} +.el \{\ +. sp -1 +. IP " 3." 4.2 +.\} +The IP address of the server or peer to which the local system is synchronised. +[203.0.113.15] +.RE +.sp +.RS 4 +.ie n \{\ +\h'-04' 4.\h'+01'\c +.\} +.el \{\ +. sp -1 +. IP " 4." 4.2 +.\} +The stratum of the local system. [2] +.RE +.sp +.RS 4 +.ie n \{\ +\h'-04' 5.\h'+01'\c +.\} +.el \{\ +. sp -1 +. IP " 5." 4.2 +.\} +The local system frequency (in ppm, positive means the local system runs fast +of UTC). [\-3.541] +.RE +.sp +.RS 4 +.ie n \{\ +\h'-04' 6.\h'+01'\c +.\} +.el \{\ +. sp -1 +. IP " 6." 4.2 +.\} +The error bounds on the frequency (in ppm). [0.075] +.RE +.sp +.RS 4 +.ie n \{\ +\h'-04' 7.\h'+01'\c +.\} +.el \{\ +. sp -1 +. IP " 7." 4.2 +.\} +The estimated local offset at the epoch, which is normally corrected by +slewing the local clock (in seconds, positive indicates the clock is fast of +UTC). [\-8.621e\-06] +.RE +.sp +.RS 4 +.ie n \{\ +\h'-04' 8.\h'+01'\c +.\} +.el \{\ +. sp -1 +. IP " 8." 4.2 +.\} +Leap status (\fIN\fP means normal, \fI+\fP means that the last minute of this month +has 61 seconds, \fI\-\fP means that the last minute of the month has 59 seconds, +\fI?\fP means the clock is not currently synchronised.) [N] +.RE +.sp +.RS 4 +.ie n \{\ +\h'-04' 9.\h'+01'\c +.\} +.el \{\ +. sp -1 +. IP " 9." 4.2 +.\} +The number of combined sources. [2] +.RE +.sp +.RS 4 +.ie n \{\ +\h'-04' 10.\h'+01'\c +.\} +.el \{\ +. sp -1 +. IP " 10." 4.2 +.\} +The estimated standard deviation of the combined offset (in seconds). +[2.940e\-03] +.RE +.sp +.RS 4 +.ie n \{\ +\h'-04' 11.\h'+01'\c +.\} +.el \{\ +. sp -1 +. IP " 11." 4.2 +.\} +The remaining offset correction from the previous update (in seconds, +positive means the system clock is slow of UTC). [\-2.084e\-04] +.RE +.sp +.RS 4 +.ie n \{\ +\h'-04' 12.\h'+01'\c +.\} +.el \{\ +. sp -1 +. IP " 12." 4.2 +.\} +The total of the network path delays to the reference clock to which +the local clock is ultimately synchronised (in seconds). [1.534e\-02] +.RE +.sp +.RS 4 +.ie n \{\ +\h'-04' 13.\h'+01'\c +.\} +.el \{\ +. sp -1 +. IP " 13." 4.2 +.\} +The total dispersion accumulated through all the servers back to the +reference clock to which the local clock is ultimately synchronised +(in seconds). [3.472e\-04] +.RE +.sp +.RS 4 +.ie n \{\ +\h'-04' 14.\h'+01'\c +.\} +.el \{\ +. sp -1 +. IP " 14." 4.2 +.\} +The maximum estimated error of the system clock in the interval since the +previous update (in seconds). It includes the offset, remaining offset +correction, root delay, and dispersion from the previous update with the +dispersion which accumulated in the interval. [8.304e\-03] +.RE +.RE +.sp +\fBrtc\fP +.RS 4 +This option logs information about the system\(cqs real\-time clock. An example +line (which actually appears as a single line in the file) from the \fIrtc.log\fP +file is shown below. +.sp +.if n .RS 4 +.nf +.fam C +2015\-07\-22 05:40:50 \-0.037360 1 \-0.037434\(rs + \-37.948 12 5 120 +.fam +.fi +.if n .RE +.sp +The columns are as follows (the quantities in square brackets are the +values from the example line above): +.sp +.RS 4 +.ie n \{\ +\h'-04' 1.\h'+01'\c +.\} +.el \{\ +. sp -1 +. IP " 1." 4.2 +.\} +Date [2015\-07\-22] +.RE +.sp +.RS 4 +.ie n \{\ +\h'-04' 2.\h'+01'\c +.\} +.el \{\ +. sp -1 +. IP " 2." 4.2 +.\} +Hour:Minute:Second. Note that the date\-time pair is expressed in UTC, not the +local time zone. [05:40:50] +.RE +.sp +.RS 4 +.ie n \{\ +\h'-04' 3.\h'+01'\c +.\} +.el \{\ +. sp -1 +. IP " 3." 4.2 +.\} +The measured offset between the RTC and the system clock in seconds. +Positive indicates that the RTC is fast of the system time [\-0.037360]. +.RE +.sp +.RS 4 +.ie n \{\ +\h'-04' 4.\h'+01'\c +.\} +.el \{\ +. sp -1 +. IP " 4." 4.2 +.\} +Flag indicating whether the regression has produced valid coefficients. +(1 for yes, 0 for no). [1] +.RE +.sp +.RS 4 +.ie n \{\ +\h'-04' 5.\h'+01'\c +.\} +.el \{\ +. sp -1 +. IP " 5." 4.2 +.\} +Offset at the current time predicted by the regression process. A large +difference between this value and the measured offset tends to indicate that +the measurement is an outlier with a serious measurement error. [\-0.037434] +.RE +.sp +.RS 4 +.ie n \{\ +\h'-04' 6.\h'+01'\c +.\} +.el \{\ +. sp -1 +. IP " 6." 4.2 +.\} +The rate at which the RTC is losing or gaining time relative to the system +clock. In ppm, with positive indicating that the RTC is gaining time. +[\-37.948] +.RE +.sp +.RS 4 +.ie n \{\ +\h'-04' 7.\h'+01'\c +.\} +.el \{\ +. sp -1 +. IP " 7." 4.2 +.\} +The number of measurements used in the regression. [12] +.RE +.sp +.RS 4 +.ie n \{\ +\h'-04' 8.\h'+01'\c +.\} +.el \{\ +. sp -1 +. IP " 8." 4.2 +.\} +The number of runs of regression residuals of the same sign. Low values +indicate that a straight line is no longer a good model of the measured data +and that older measurements should be discarded. [5] +.RE +.sp +.RS 4 +.ie n \{\ +\h'-04' 9.\h'+01'\c +.\} +.el \{\ +. sp -1 +. IP " 9." 4.2 +.\} +The measurement interval used prior to the measurement being made (in +seconds). [120] +.RE +.RE +.sp +\fBrefclocks\fP +.RS 4 +This option logs the raw and filtered reference clock measurements to a file +called \fIrefclocks.log\fP. An example line (which actually appears as a single +line in the file) from the log file is shown below. +.sp +.if n .RS 4 +.nf +.fam C +2009\-11\-30 14:33:27.000000 PPS2 7 N 1 4.900000e\-07 \-6.741777e\-07 1.000e\-06 +.fam +.fi +.if n .RE +.sp +The columns are as follows (the quantities in square brackets are the values +from the example line above): +.sp +.RS 4 +.ie n \{\ +\h'-04' 1.\h'+01'\c +.\} +.el \{\ +. sp -1 +. IP " 1." 4.2 +.\} +Date [2009\-11\-30] +.RE +.sp +.RS 4 +.ie n \{\ +\h'-04' 2.\h'+01'\c +.\} +.el \{\ +. sp -1 +. IP " 2." 4.2 +.\} +Hour:Minute:Second.Microsecond. Note that the date\-time pair is expressed in +UTC, not the local time zone. [14:33:27.000000] +.RE +.sp +.RS 4 +.ie n \{\ +\h'-04' 3.\h'+01'\c +.\} +.el \{\ +. sp -1 +. IP " 3." 4.2 +.\} +Reference ID of the reference clock from which the measurement came. [PPS2] +.RE +.sp +.RS 4 +.ie n \{\ +\h'-04' 4.\h'+01'\c +.\} +.el \{\ +. sp -1 +. IP " 4." 4.2 +.\} +Sequence number of driver poll within one polling interval for raw samples, +or \fI\-\fP for filtered samples. [7] +.RE +.sp +.RS 4 +.ie n \{\ +\h'-04' 5.\h'+01'\c +.\} +.el \{\ +. sp -1 +. IP " 5." 4.2 +.\} +Leap status (\fIN\fP means normal, \fI+\fP means that the last minute of the current +month has 61 seconds, \fI\-\fP means that the last minute of the month has 59 +seconds). [N] +.RE +.sp +.RS 4 +.ie n \{\ +\h'-04' 6.\h'+01'\c +.\} +.el \{\ +. sp -1 +. IP " 6." 4.2 +.\} +Flag indicating whether the sample comes from PPS source. (1 for yes, +0 for no, or \fI\-\fP for filtered sample). [1] +.RE +.sp +.RS 4 +.ie n \{\ +\h'-04' 7.\h'+01'\c +.\} +.el \{\ +. sp -1 +. IP " 7." 4.2 +.\} +Local clock error measured by reference clock driver, or \fI\-\fP for filtered sample. +[4.900000e\-07] +.RE +.sp +.RS 4 +.ie n \{\ +\h'-04' 8.\h'+01'\c +.\} +.el \{\ +. sp -1 +. IP " 8." 4.2 +.\} +Local clock error with applied corrections. Positive indicates that the local +clock is slow. [\-6.741777e\-07] +.RE +.sp +.RS 4 +.ie n \{\ +\h'-04' 9.\h'+01'\c +.\} +.el \{\ +. sp -1 +. IP " 9." 4.2 +.\} +Assumed dispersion of the sample. [1.000e\-06] +.RE +.RE +.sp +\fBtempcomp\fP +.RS 4 +This option logs the temperature measurements and system rate compensations to +a file called \fItempcomp.log\fP. An example line (which actually appears as a +single line in the file) from the log file is shown below. +.sp +.if n .RS 4 +.nf +.fam C +2015\-04\-19 10:39:48 2.8000e+04 3.6600e\-01 +.fam +.fi +.if n .RE +.sp +The columns are as follows (the quantities in square brackets are the values +from the example line above): +.sp +.RS 4 +.ie n \{\ +\h'-04' 1.\h'+01'\c +.\} +.el \{\ +. sp -1 +. IP " 1." 4.2 +.\} +Date [2015\-04\-19] +.RE +.sp +.RS 4 +.ie n \{\ +\h'-04' 2.\h'+01'\c +.\} +.el \{\ +. sp -1 +. IP " 2." 4.2 +.\} +Hour:Minute:Second. Note that the date\-time pair is expressed in UTC, not the +local time zone. [10:39:48] +.RE +.sp +.RS 4 +.ie n \{\ +\h'-04' 3.\h'+01'\c +.\} +.el \{\ +. sp -1 +. IP " 3." 4.2 +.\} +Temperature read from the sensor. [2.8000e+04] +.RE +.sp +.RS 4 +.ie n \{\ +\h'-04' 4.\h'+01'\c +.\} +.el \{\ +. sp -1 +. IP " 4." 4.2 +.\} +Applied compensation in ppm, positive means the system clock is running +faster than it would be without the compensation. [3.6600e\-01] +.RE +.RE +.RE +.sp + +.RS 4 +An example of the directive is: +.sp +.if n .RS 4 +.nf +.fam C +log measurements statistics tracking +.fam +.fi +.if n .RE +.RE +.sp +\fBlogbanner\fP \fIentries\fP +.RS 4 +A banner is periodically written to the log files enabled by the \fBlog\fP +directive to indicate the meanings of the columns. +.sp +The \fBlogbanner\fP directive specifies after how many entries in the log file +should be the banner written. The default is 32, and 0 can be used to disable +it entirely. +.RE +.sp +\fBlogchange\fP \fIthreshold\fP +.RS 4 +This directive sets the threshold for the adjustment of the system clock that +will generate a syslog message. Clock errors detected via NTP packets, +reference clocks, or timestamps entered via the +\fBsettime\fP command of \fBchronyc\fP are logged. +.sp +By default, the threshold is 1 second. +.sp +An example of the use is: +.sp +.if n .RS 4 +.nf +.fam C +logchange 0.1 +.fam +.fi +.if n .RE +.sp +which would cause a syslog message to be generated if a system clock error of over +0.1 seconds starts to be compensated. +.RE +.sp +\fBlogdir\fP \fIdirectory\fP +.RS 4 +This directive specifies the directory for writing log files enabled by the +\fBlog\fP directive. If the directory does not exist, it will be created +automatically. +.sp +An example of the use of this directive is: +.sp +.if n .RS 4 +.nf +.fam C +logdir /var/log/chrony +.fam +.fi +.if n .RE +.RE +.sp +\fBmailonchange\fP \fIemail\fP \fIthreshold\fP +.RS 4 +This directive defines an email address to which mail should be sent if +\fBchronyd\fP applies a correction exceeding a particular threshold to the system +clock. +.sp +An example of the use of this directive is: +.sp +.if n .RS 4 +.nf +.fam C +mailonchange root@localhost 0.5 +.fam +.fi +.if n .RE +.sp +This would send a mail message to root if a change of more than 0.5 seconds +were applied to the system clock. +.sp +This directive cannot be used when a system call filter is enabled by the \fB\-F\fP +option as the \fBchronyd\fP process will not be allowed to fork and execute the +sendmail binary. +.RE +.SS "Miscellaneous" +.sp +\fBconfdir\fP \fIdirectory\fP... +.RS 4 +The \fBconfdir\fP directive includes configuration files with the \fI.conf\fP suffix +from a directory. The files are included in the lexicographical order of the +file names. +.sp +Multiple directories (up to 10) can be specified with a single \fBconfdir\fP +directive. In this case, if multiple directories contain a file with the same +name, only the first file in the order of the specified directories will be +included. This enables a fragmented configuration where existing fragments can +be replaced by adding files to a different directory. +.sp +This directive can be used multiple times. +.sp +An example of the directive is: +.sp +.if n .RS 4 +.nf +.fam C +confdir @SYSCONFDIR@/chrony.d +.fam +.fi +.if n .RE +.RE +.sp +\fBsourcedir\fP \fIdirectory\fP... +.RS 4 +The \fBsourcedir\fP directive is identical to the \fBconfdir\fP directive, except the +configuration files have the \fI.sources\fP suffix, they can only specify NTP +sources (i.e. the \fBserver\fP, \fBpool\fP, and \fBpeer\fP directives), they are expected +to have all lines terminated by the newline character, and they can be +reloaded by the \fBreload sources\fP command in +\fBchronyc\fP. It is particularly useful with dynamic sources like NTP servers +received from a DHCP server, which can be written to a file specific to the +network interface by a networking script. +.sp +This directive can be used multiple times. +.sp +An example of the directive is: +.sp +.if n .RS 4 +.nf +.fam C +sourcedir /var/run/chrony\-dhcp +.fam +.fi +.if n .RE +.RE +.sp +\fBinclude\fP \fIpattern\fP +.RS 4 +The \fBinclude\fP directive includes a configuration file, or multiple configuration +files if a wildcard pattern is specified. Unlike with the \fBconfdir\fP directive, +the full name of the files needs to be specified and at least one file is +required to exist. +.sp +This directive can be used multiple times. +.sp +An example of the directive is: +.sp +.if n .RS 4 +.nf +.fam C +include @SYSCONFDIR@/chrony.d/*.conf +.fam +.fi +.if n .RE +.RE +.sp +\fBhwtimestamp\fP \fIinterface\fP [\fIoption\fP]... +.RS 4 +This directive enables hardware timestamping of NTP packets sent to and +received from the specified network interface. The network interface controller +(NIC) uses its own clock to accurately timestamp the actual transmissions and +receptions, avoiding processing and queueing delays in the kernel, network +driver, and hardware. This can significantly improve the accuracy of the +timestamps and the measured offset, which is used for synchronisation of the +system clock. In order to get the best results, both sides receiving and +sending NTP packets (i.e. server and client, or two peers) need to use HW +timestamping. If the server or peer supports the interleaved mode, it needs to +be enabled by the \fBxleave\fP option in the \fBserver\fP or the +\fBpeer\fP directive. +.sp +This directive is supported on Linux 3.19 and newer. The NIC must support HW +timestamping, which can be verified with the \fBethtool \-T\fP command. The list of +capabilities should include \fIhardware\-raw\-clock\fP, \fIhardware\-transmit\fP, and +\fIhardware\-receive\fP. The receive filter \fIall\fP, or \fIntp\fP, is necessary for +timestamping of received NTP packets. Timestamping of packets received on +bridged and bonded interfaces is supported on Linux 4.13 and newer. If HW +timestamping does not work for received packets, \fBchronyd\fP will use kernel +receive timestamps instead. Transmit\-only HW timestamping can still be useful +to improve stability of the synchronisation. +.sp +\fBchronyd\fP does not synchronise the NIC clock. It assumes the clock is running +free. Multiple instances of \fBchronyd\fP can use the same interface with enabled +HW timestamping. Applications which need HW timestamping with a synchronised +clock (e.g. a PTP daemon) should use a virtual clock running on top of the +physical clock created by writing to \fI/sys/class/ptp/ptpX/n_vclocks\fP. This +feature is available on Linux 5.14 and newer. +.sp +If the kernel supports software timestamping, it will be enabled for all +interfaces. The source of timestamps (i.e. hardware, kernel, or daemon) is +indicated in the \fImeasurements.log\fP file if enabled by the \fBlog +measurements\fP directive, and the \fBntpdata\fP report in +\fBchronyc\fP. +.sp +This directive can be used multiple times to enable HW timestamping on multiple +interfaces. If the specified interface is \fI*\fP, \fBchronyd\fP will try to enable HW +timestamping on all available interfaces. +.sp +The \fBhwtimestamp\fP directive has the following options: +.sp +\fBminpoll\fP \fIpoll\fP +.RS 4 +This option specifies the minimum interval between readings of the NIC clock. +It\(cqs defined as a power of two. It should correspond to the minimum polling +interval of all NTP sources and the minimum expected polling interval of NTP +clients. The default value is 0 (1 second) and the minimum value is \-6 (1/64th +of a second). +.RE +.sp +\fBminsamples\fP \fIsamples\fP +.RS 4 +This option specifies the minimum number of readings kept for tracking of the +NIC clock. The default value is 2. +.RE +.sp +\fBmaxsamples\fP \fIsamples\fP +.RS 4 +This option specifies the maximum number of readings kept for tracking of the +NIC clock. The default value is 16. +.RE +.sp +\fBprecision\fP \fIprecision\fP +.RS 4 +This option specifies the assumed precision of reading of the NIC clock. The +default value is 100e\-9 (100 nanoseconds). +.RE +.sp +\fBtxcomp\fP \fIcompensation\fP +.RS 4 +This option specifies the difference in seconds between the actual transmission +time at the physical layer and the reported transmit timestamp. This value will +be added to transmit timestamps obtained from the NIC. The default value is 0. +.RE +.sp +\fBrxcomp\fP \fIcompensation\fP +.RS 4 +This option specifies the difference in seconds between the reported receive +timestamp and the actual reception time at the physical layer. This value will +be subtracted from receive timestamps obtained from the NIC. The default value +is 0. +.RE +.sp +\fBnocrossts\fP +.RS 4 +Some hardware can precisely cross timestamp the NIC clock with the system +clock. This option disables the use of the cross timestamping. +.RE +.sp +\fBrxfilter\fP \fIfilter\fP +.RS 4 +This option selects the receive timestamping filter. The \fIfilter\fP can be one of +the following: +.sp +\fIall\fP +.RS 4 +Enables timestamping of all received packets. +.RE +.sp +\fIntp\fP +.RS 4 +Enables timestamping of received NTP packets. +.RE +.sp +\fIptp\fP +.RS 4 +Enables timestamping of received PTP packets. +.RE +.sp +\fInone\fP +.RS 4 +Disables timestamping of received packets. +.RE +.RE +.sp + +.RS 4 +The most specific filter for timestamping of NTP packets supported by the NIC +is selected by default. Some NICs can timestamp PTP packets only. By default, +they will be configured with the \fInone\fP filter and expected to provide hardware +timestamps for transmitted packets only. Timestamping of PTP packets is useful +with NTP\-over\-PTP enabled by the \fBptpport\fP +directive, or when another application is receiving PTP packets on the +interface. Forcing timestamping of all packets with the \fIall\fP filter could be +useful if the NIC supported both the \fIall\fP and \fIntp\fP filters, and it should +timestamp both NTP and PTP packets, or NTP packets on a different UDP port. +.RE +.RE +.sp + +.RS 4 +.sp +Examples of the directive are: +.sp +.if n .RS 4 +.nf +.fam C +hwtimestamp eth0 +hwtimestamp eth1 txcomp 300e\-9 rxcomp 645e\-9 +hwtimestamp * +.fam +.fi +.if n .RE +.RE +.sp +\fBkeyfile\fP \fIfile\fP +.RS 4 +This directive is used to specify the location of the file containing symmetric +keys which are shared between NTP servers and clients, or peers, in order to +authenticate NTP packets with a message authentication code (MAC) using a +cryptographic hash function or cipher. +.sp +The format of the directive is shown in the example below: +.sp +.if n .RS 4 +.nf +.fam C +keyfile @SYSCONFDIR@/chrony.keys +.fam +.fi +.if n .RE +.sp +The argument is simply the name of the file containing the ID\-key pairs. The +format of the file is shown below: +.sp +.if n .RS 4 +.nf +.fam C +10 tulip +11 hyacinth +20 MD5 ASCII:crocus +25 SHA1 HEX:933F62BE1D604E68A81B557F18CFA200483F5B70 +30 AES128 HEX:7EA62AE64D190114D46D5A082F948EC1 +31 AES256 HEX:37DDCBC67BB902BCB8E995977FAB4D2B5642F5B32EBCEEE421921D97E5CBFE39 + ... +.fam +.fi +.if n .RE +.sp +Each line consists of an ID, optional type, and key. +.sp +The ID can be any positive integer in the range 1 through 2^32\-1. +.sp +The type is a name of a cryptographic hash function or cipher which is used to +generate and verify the MAC. The default type is \fBMD5\fP, which is always +supported. +If \fBchronyd\fP was built with enabled support for hashing using a crypto library +(Nettle, GnuTLS, NSS, or LibTomCrypt), the following functions are available: \fBMD5\fP, +\fBSHA1\fP, \fBSHA256\fP, \fBSHA384\fP, \fBSHA512\fP. Depending on which library and version is +\fBchronyd\fP using, some of the following hash functions and ciphers may +also be available: +\fBSHA3\-224\fP, \fBSHA3\-256\fP, \fBSHA3\-384\fP, \fBSHA3\-512\fP, \fBTIGER\fP, \fBWHIRLPOOL\fP, \fBAES128\fP, +\fBAES256\fP. +.sp +The key can be specified as a string of ASCII characters not containing white +space with an optional \fBASCII:\fP prefix, or as a hexadecimal number with the +\fBHEX:\fP prefix. The maximum length of the line is 2047 characters. +If the type is a cipher, the length of the key must match the cipher (i.e. 128 +bits for AES128 and 256 bits for AES256). +.sp +It is recommended to use randomly generated keys, specified in the hexadecimal +format, which are at least 128 bits long (i.e. they have at least 32 characters +after the \fBHEX:\fP prefix). \fBchronyd\fP will log a warning to syslog on start if a +source is specified in the configuration file with a key shorter than 80 bits. +.sp +The recommended key types are AES ciphers and SHA3 hash functions. MD5 should +be avoided unless no other type is supported on the server and client, or +peers. +.sp +The \fBkeygen\fP command of \fBchronyc\fP can be used to +generate random keys for the key file. By default, it generates 160\-bit MD5 or +SHA1 keys. +.sp +For security reasons, the file should be readable only by root and the user +under which \fBchronyd\fP is normally running (to allow \fBchronyd\fP to re\-read the +file when the \fBrekey\fP command is issued by \fBchronyc\fP). +.RE +.sp +\fBlock_all\fP +.RS 4 +The \fBlock_all\fP directive will lock the \fBchronyd\fP process into RAM so that it +will never be paged out. This can result in lower and more consistent latency. +The directive is supported on Linux, FreeBSD, NetBSD, and illumos. +.RE +.sp +\fBpidfile\fP \fIfile\fP +.RS 4 +Unless \fBchronyd\fP is started with the \fB\-Q\fP option, it writes its process ID +(PID) to a file, and checks this file on startup to see if another \fBchronyd\fP +might already be running on the system. By default, the file used is +\fI@DEFAULT_PID_FILE@\fP. The \fBpidfile\fP directive allows the name to be changed, +e.g.: +.sp +.if n .RS 4 +.nf +.fam C +pidfile /run/chronyd.pid +.fam +.fi +.if n .RE +.RE +.sp +\fBptpport\fP \fIport\fP +.RS 4 +The \fBptpport\fP directive enables \fBchronyd\fP to send and receive NTP messages +contained in PTP event messages (NTP\-over\-PTP) to enable hardware timestamping +on NICs which cannot timestamp NTP packets, but can timestamp unicast PTP +packets. The port recognized by the NICs is 319 (PTP event port). The default +value is 0 (disabled). +.sp +The NTP\-over\-PTP support is experimental. The protocol and configuration can +change in future. It should be used only in local networks and expected to work +only between servers and clients running the same version of \fBchronyd\fP. +.sp +The PTP port will be open even if \fBchronyd\fP is not configured to operate as a +server or client. The directive does not change the default protocol of +specified NTP sources. Each NTP source that should use NTP\-over\-PTP needs to +be specified with the \fBport\fP option set to the PTP port. To actually enable +hardware timestamping on NICs which can timestamp PTP packets only, the +\fBrxfilter\fP option of the \fBhwtimestamp\fP directive needs to be set to \fIptp\fP. +.sp +An example of client configuration is: +.sp +.if n .RS 4 +.nf +.fam C +server foo.example.net minpoll 0 maxpoll 0 xleave port 319 +hwtimestamp * rxfilter ptp +ptpport 319 +.fam +.fi +.if n .RE +.RE +.sp +\fBsched_priority\fP \fIpriority\fP +.RS 4 +On Linux, FreeBSD, NetBSD, and illumos, the \fBsched_priority\fP directive will +select the SCHED_FIFO real\-time scheduler at the specified priority (which must +be between 0 and 100). On macOS, this option must have either a value of 0 (the +default) to disable the thread time constraint policy or 1 for the policy to be +enabled. +.sp +On systems other than macOS, this directive uses the \fBpthread_setschedparam()\fP +system call to instruct the kernel to use the SCHED_FIFO first\-in, first\-out +real\-time scheduling policy for \fBchronyd\fP with the specified priority. This +means that whenever \fBchronyd\fP is ready to run it will run, interrupting +whatever else is running unless it is a higher priority real\-time process. This +should not impact performance as \fBchronyd\fP resource requirements are modest, +but it should result in lower and more consistent latency since \fBchronyd\fP will +not need to wait for the scheduler to get around to running it. You should not +use this unless you really need it. The \fBpthread_setschedparam(3)\fP man page has +more details. +.sp +On macOS, this directive uses the \fBthread_policy_set()\fP kernel call to +specify real\-time scheduling. As noted above, you should not use this directive +unless you really need it. +.RE +.sp +\fBuser\fP \fIuser\fP +.RS 4 +The \fBuser\fP directive sets the name of the system user to which \fBchronyd\fP will +switch after start in order to drop root privileges. +.sp +On Linux, \fBchronyd\fP needs to be compiled with support for the \fBlibcap\fP library. +On macOS, FreeBSD, NetBSD and illumos \fBchronyd\fP forks into two processes. +The child process retains root privileges, but can only perform a very limited +range of privileged system calls on behalf of the parent. +.sp +The compiled\-in default value is \fI@DEFAULT_USER@\fP. +.RE +.SH "EXAMPLES" +.SS "NTP client with permanent connection to NTP servers" +.sp +This section shows how to configure \fBchronyd\fP for computers that are connected +to the Internet (or to any network containing true NTP servers which ultimately +derive their time from a reference clock) permanently or most of the time. +.sp +To operate in this mode, you will need to know the names of the NTP servers +you want to use. You might be able to find names of suitable servers by one of +the following methods: +.sp +.RS 4 +.ie n \{\ +\h'-04'\(bu\h'+03'\c +.\} +.el \{\ +. sp -1 +. IP \(bu 2.3 +.\} +Your institution might already operate servers on its network. +Contact your system administrator to find out. +.RE +.sp +.RS 4 +.ie n \{\ +\h'-04'\(bu\h'+03'\c +.\} +.el \{\ +. sp -1 +. IP \(bu 2.3 +.\} +Your ISP probably has one or more NTP servers available for its +customers. +.RE +.sp +.RS 4 +.ie n \{\ +\h'-04'\(bu\h'+03'\c +.\} +.el \{\ +. sp -1 +. IP \(bu 2.3 +.\} +Somewhere under the NTP homepage there is a list of public +stratum 1 and stratum 2 servers. You should find one or more servers that are +near to you. Check that their access policy allows you to use their +facilities. +.RE +.sp +.RS 4 +.ie n \{\ +\h'-04'\(bu\h'+03'\c +.\} +.el \{\ +. sp -1 +. IP \(bu 2.3 +.\} +Use public servers from the \c +.URL "https://www.pool.ntp.org/" "pool.ntp.org" "" +project. +.RE +.sp +Assuming that your NTP servers are called \fIfoo.example.net\fP, \fIbar.example.net\fP +and \fIbaz.example.net\fP, your \fIchrony.conf\fP file could contain as a minimum: +.sp +.if n .RS 4 +.nf +.fam C +server foo.example.net +server bar.example.net +server baz.example.net +.fam +.fi +.if n .RE +.sp +However, you will probably want to include some of the other directives. The +\fBdriftfile\fP, \fBmakestep\fP and \fBrtcsync\fP +might be particularly useful. Also, the \fBiburst\fP option of the +\fBserver\fP directive is useful to speed up the initial +synchronisation. The smallest useful configuration file would look something +like: +.sp +.if n .RS 4 +.nf +.fam C +server foo.example.net iburst +server bar.example.net iburst +server baz.example.net iburst +driftfile @CHRONYVARDIR@/drift +makestep 1.0 3 +rtcsync +.fam +.fi +.if n .RE +.sp +When using a pool of NTP servers (one name is used for multiple servers which +might change over time), it is better to specify them with the \fBpool\fP +directive instead of multiple \fBserver\fP directives. The configuration file could +in this case look like: +.sp +.if n .RS 4 +.nf +.fam C +pool pool.ntp.org iburst +driftfile @CHRONYVARDIR@/drift +makestep 1.0 3 +rtcsync +.fam +.fi +.if n .RE +.sp +If the servers (or pool) support the Network Time Security (NTS) +authentication mechanism and \fBchronyd\fP is compiled with NTS support, the \fBnts\fP +option will enable a secure synchronisation to the servers. The configuration +file could look like: +.sp +.if n .RS 4 +.nf +.fam C +server foo.example.net iburst nts +server bar.example.net iburst nts +server baz.example.net iburst nts +driftfile @CHRONYVARDIR@/drift +makestep 1.0 3 +rtcsync +.fam +.fi +.if n .RE +.SS "NTP client with infrequent connection to NTP servers" +.sp +This section shows how to configure \fBchronyd\fP for computers that have +occasional connections to NTP servers. In this case, you will need some +additional configuration to tell \fBchronyd\fP when the connection goes up and +down. This saves the program from continuously trying to poll the servers when +they are inaccessible. +.sp +Again, assuming that your NTP servers are called \fIfoo.example.net\fP, +\fIbar.example.net\fP and \fIbaz.example.net\fP, your \fIchrony.conf\fP file would now +contain: +.sp +.if n .RS 4 +.nf +.fam C +server foo.example.net offline +server bar.example.net offline +server baz.example.net offline +driftfile @CHRONYVARDIR@/drift +makestep 1.0 3 +rtcsync +.fam +.fi +.if n .RE +.sp +The \fBoffline\fP keyword indicates that the servers start in an offline state, and +that they should not be contacted until \fBchronyd\fP receives notification from +\fBchronyc\fP that the link to the Internet is present. To tell \fBchronyd\fP when to +start and finish sampling the servers, the \fBonline\fP and +\fBoffline\fP commands of \fBchronyc\fP need to be used. +.sp +To give an example of their use, assuming that \fBpppd\fP is the program being +used to connect to the Internet and that \fBchronyc\fP has been installed at +\fI@BINDIR@/chronyc\fP, the script \fI/etc/ppp/ip\-up\fP would include: +.sp +.if n .RS 4 +.nf +.fam C +@BINDIR@/chronyc online +.fam +.fi +.if n .RE +.sp +and the script \fI/etc/ppp/ip\-down\fP would include: +.sp +.if n .RS 4 +.nf +.fam C +@BINDIR@/chronyc offline +.fam +.fi +.if n .RE +.sp +\fBchronyd\fP\(aqs polling of the servers would now only occur whilst the machine is +actually connected to the Internet. +.SS "Isolated networks" +.sp +This section shows how to configure \fBchronyd\fP for computers that never have +network connectivity to any computer which ultimately derives its time from a +reference clock. +.sp +In this situation, one computer is selected to be the primary timeserver. The +other computers are either direct clients of the server, or clients of clients. +.sp +The \fBlocal\fP directive enables a local reference mode, which allows +\fBchronyd\fP to appear synchronised even when it is not. +.sp +The rate value in the server\(cqs drift file needs to be set to the average rate +at which the server gains or loses time. \fBchronyd\fP includes support for this, +in the form of the \fBmanual\fP directive and the +\fBsettime\fP command in the \fBchronyc\fP program. +.sp +If the server is rebooted, \fBchronyd\fP can re\-read the drift rate from the drift +file. However, the server has no accurate estimate of the current time. To get +around this, the system can be configured so that the server can initially set +itself to a \(oqmajority\-vote\(cq of selected clients\(aq times; this allows the +clients to \(oqflywheel\(cq the server while it is rebooting. +.sp +The \fBsmoothtime\fP directive is useful when the clocks of the +clients need to stay close together when the local time is adjusted by the +\fBsettime\fP command. The smoothing process needs to be +activated by the \fBsmoothtime activate\fP command when +the local time is ready to be served. After that point, any adjustments will be +smoothed out. +.sp +A typical configuration file for the server (called \fIntp.local\fP) might be +(assuming the clients and the server are in the \fI192.168.165.x\fP subnet): +.sp +.if n .RS 4 +.nf +.fam C +initstepslew 1 client1 client3 client6 +driftfile @CHRONYVARDIR@/drift +local stratum 8 +manual +allow 192.168.165.0/24 +smoothtime 400 0.01 +rtcsync +.fam +.fi +.if n .RE +.sp +For the clients that have to resynchronise the server when it restarts, +the configuration file might be: +.sp +.if n .RS 4 +.nf +.fam C +server ntp.local iburst +driftfile @CHRONYVARDIR@/drift +allow 192.168.165.0/24 +makestep 1.0 3 +rtcsync +.fam +.fi +.if n .RE +.sp +The rest of the clients would be the same, except that the \fBallow\fP directive is +not required. +.sp +If there is no suitable computer to be designated as the primary server, or +there is a requirement to keep the clients synchronised even when it fails, the +\fBorphan\fP option of the \fBlocal\fP directive enables a special mode where the +server is selected from multiple computers automatically. They all need to use +the same \fBlocal\fP configuration and poll one another. The server with the +smallest reference ID (which is based on its IP address) will take the role of +the primary server and others will be synchronised to it. When it fails, the +server with the second smallest reference ID will take over and so on. +.sp +A configuration file for the first server might be (assuming there are three +servers called \fIntp1.local\fP, \fIntp2.local\fP, and \fIntp3.local\fP): +.sp +.if n .RS 4 +.nf +.fam C +initstepslew 1 ntp2.local ntp3.local +server ntp2.local +server ntp3.local +driftfile @CHRONYVARDIR@/drift +local stratum 8 orphan +manual +allow 192.168.165.0/24 +rtcsync +.fam +.fi +.if n .RE +.sp +The other servers would be the same, except the hostnames in the \fBinitstepslew\fP +and \fBserver\fP directives would be modified to specify the other servers. Their +clients might be configured to poll all three servers. +.SS "RTC tracking" +.sp +This section considers a computer which has occasional connections to the +Internet and is turned off between \(oqsessions\(cq. In this case, \fBchronyd\fP relies +on the computer\(cqs RTC to maintain the time between the periods when it is +powered up. It assumes that Linux is run exclusively on the computer. Dual\-boot +systems might work; it depends what (if anything) the other system does to the +RTC. On 2.6 and later kernels, if your motherboard has a HPET, you will need to +enable the \fBHPET_EMULATE_RTC\fP option in your kernel configuration. Otherwise, +\fBchronyd\fP will not be able to interact with the RTC device and will give up +using it. +.sp +When the computer is connected to the Internet, \fBchronyd\fP has access to +external NTP servers which it makes measurements from. These measurements are +saved, and straight\-line fits are performed on them to provide an estimate of +the computer\(cqs time error and rate of gaining or losing time. +.sp +When the computer is taken offline from the Internet, the best estimate of the +gain or loss rate is used to free\-run the computer until it next goes online. +.sp +Whilst the computer is running, \fBchronyd\fP makes measurements of the RTC (via +the \fI/dev/rtc\fP interface, which must be compiled into the kernel). An estimate +is made of the RTC error at a particular RTC second, and the rate at which the +RTC gains or loses time relative to true time. +.sp +When the computer is powered down, the measurement histories for all the NTP +servers are saved to files, and the RTC tracking information is also +saved to a file (if the \fBrtcfile\fP directive has been specified). +These pieces of information are also saved if the \fBdump\fP +and \fBwritertc\fP commands respectively are issued +through \fBchronyc\fP. +.sp +When the computer is rebooted, \fBchronyd\fP reads the current RTC time and the RTC +information saved at the last shutdown. This information is used to set the +system clock to the best estimate of what its time would have been now, had it +been left running continuously. The measurement histories for the servers are +then reloaded. +.sp +The next time the computer goes online, the previous sessions\(aq measurements can +contribute to the line\-fitting process, which gives a much better estimate of +the computer\(cqs gain or loss rate. +.sp +One problem with saving the measurements and RTC data when the machine is shut +down is what happens if there is a power failure; the most recent data will not +be saved. Although \fBchronyd\fP is robust enough to cope with this, some +performance might be lost. (The main danger arises if the RTC has been changed +during the session, with the \fBtrimrtc\fP command in \fBchronyc\fP. Because of this, +\fBtrimrtc\fP will make sure that a meaningful RTC file is saved after the +change is completed). +.sp +The easiest protection against power failure is to put the \fBdump\fP and +\fBwritertc\fP commands in the same place as the \fBoffline\fP command is issued to +take \fBchronyd\fP offline; because \fBchronyd\fP free\-runs between online sessions, no +parameters will change significantly between going offline from the Internet +and any power failure. +.sp +A final point regards computers which are left running for extended periods and +where it is desired to spin down the hard disc when it is not in use (e.g. when +not accessed for 15 minutes). \fBchronyd\fP has been planned so it supports such +operation; this is the reason why the RTC tracking parameters are not saved to +disc after every update, but only when the user requests such a write, or +during the shutdown sequence. The only other facility that will generate +periodic writes to the disc is the \fBlog rtc\fP facility in the configuration +file; this option should not be used if you want your disc to spin down. +.sp +To illustrate how a computer might be configured for this case, example +configuration files are shown. +.sp +For the \fIchrony.conf\fP file, the following can be used as an example. +.sp +.if n .RS 4 +.nf +.fam C +server foo.example.net maxdelay 0.4 offline +server bar.example.net maxdelay 0.4 offline +server baz.example.net maxdelay 0.4 offline +logdir /var/log/chrony +log statistics measurements tracking +driftfile @CHRONYVARDIR@/drift +makestep 1.0 3 +maxupdateskew 100.0 +dumpdir @CHRONYVARDIR@ +rtcfile @CHRONYVARDIR@/rtc +.fam +.fi +.if n .RE +.sp +\fBpppd\fP is used for connecting to the Internet. This runs two scripts +\fI/etc/ppp/ip\-up\fP and \fI/etc/ppp/ip\-down\fP when the link goes online and offline +respectively. +.sp +The relevant part of the \fI/etc/ppp/ip\-up\fP file is: +.sp +.if n .RS 4 +.nf +.fam C +@BINDIR@/chronyc online +.fam +.fi +.if n .RE +.sp +and the relevant part of the \fI/etc/ppp/ip\-down\fP script is: +.sp +.if n .RS 4 +.nf +.fam C +@BINDIR@/chronyc \-m offline dump writertc +.fam +.fi +.if n .RE +.sp +\fBchronyd\fP is started during the boot sequence with the \fB\-r\fP and \fB\-s\fP options. +It might need to be started before any software that depends on the system clock +not jumping or moving backwards, depending on the directives in \fBchronyd\fP\(aqs +configuration file. +.sp +For the system shutdown, \fBchronyd\fP should receive a SIGTERM several seconds +before the final SIGKILL; the SIGTERM causes the measurement histories and RTC +information to be saved. +.SS "Public NTP server" +.sp +\fBchronyd\fP can be configured to operate as a public NTP server, e.g. to join the +.URL "https://www.pool.ntp.org/en/join.html" "pool.ntp.org" "" +project. The configuration +is similar to the NTP client with permanent connection, except it needs to +allow client access from all addresses. It is recommended to find at least four +good servers (e.g. from the pool, or on the NTP homepage). If the server has a +hardware reference clock (e.g. a GPS receiver), it can be specified by the +\fBrefclock\fP directive. +.sp +The amount of memory used for logging client accesses can be increased in order +to enable clients to use the interleaved mode even when the server has a large +number of clients, and better support rate limiting if it is enabled by the +\fBratelimit\fP directive. The system timezone database, if it is +kept up to date and includes the \fIright/UTC\fP timezone, can be used as a +reliable source to determine when a leap second will be applied to UTC. The +\fB\-r\fP option with the \fBdumpdir\fP directive shortens the time in which +\fBchronyd\fP will not be able to serve time to its clients when it needs to be +restarted (e.g. after upgrading to a newer version, or a change in the +configuration). +.sp +The configuration file could look like: +.sp +.if n .RS 4 +.nf +.fam C +server foo.example.net iburst +server bar.example.net iburst +server baz.example.net iburst +server qux.example.net iburst +makestep 1.0 3 +rtcsync +allow +clientloglimit 100000000 +leapsectz right/UTC +driftfile @CHRONYVARDIR@/drift +dumpdir @CHRONYRUNDIR@ +.fam +.fi +.if n .RE +.SH "SEE ALSO" +.sp +\fBchronyc(1)\fP, \fBchronyd(8)\fP +.SH "BUGS" +.sp +For instructions on how to report bugs, please visit +.URL "https://chrony.tuxfamily.org/" "" "." +.SH "AUTHORS" +.sp +chrony was written by Richard Curnow, Miroslav Lichvar, and others.
\ No newline at end of file |