diff options
Diffstat (limited to '')
-rwxr-xr-x | tests/reencryption-compat-test | 489 |
1 files changed, 489 insertions, 0 deletions
diff --git a/tests/reencryption-compat-test b/tests/reencryption-compat-test new file mode 100755 index 0000000..453831d --- /dev/null +++ b/tests/reencryption-compat-test @@ -0,0 +1,489 @@ +#!/bin/bash + +[ -z "$CRYPTSETUP_PATH" ] && CRYPTSETUP_PATH=".." +CRYPTSETUP=$CRYPTSETUP_PATH/cryptsetup +REENC_BIN=$CRYPTSETUP +REENC="$REENC_BIN reencrypt" +FAST_PBKDF="--pbkdf-force-iterations 1000 --pbkdf pbkdf2" + +CRYPTSETUP_VALGRIND=../.libs/cryptsetup +CRYPTSETUP_LIB_VALGRIND=../.libs + +DEV_NAME=reenc9768 +DEV_NAME2=reenc1273 +IMG=reenc-data +IMG_HDR=$IMG.hdr +HEADER_LUKS2_PV=blkid-luks2-pv.img +ORIG_IMG=reenc-data-orig +DEV_LINK="reenc-test-link" +KEY1=key1 +PWD1="93R4P4pIqAH8" +PWD2="1cND4319812f" +PWD3="1-9Qu5Ejfnqv" + +MNT_DIR=./mnt_luks +START_DIR=$(pwd) +FIPS_MODE=$(cat /proc/sys/crypto/fips_enabled 2>/dev/null) + +function fips_mode() +{ + [ -n "$FIPS_MODE" ] && [ "$FIPS_MODE" -gt 0 ] +} + +function del_scsi_device() +{ + rmmod scsi_debug >/dev/null 2>&1 + sleep 2 +} + +function remove_mapping() +{ + [ -b /dev/mapper/$DEV_NAME2 ] && dmsetup remove --retry $DEV_NAME2 + [ -b /dev/mapper/$DEV_NAME ] && dmsetup remove --retry $DEV_NAME + [ ! -z "$LOOPDEV1" ] && losetup -d $LOOPDEV1 >/dev/null 2>&1 + rm -f $IMG $IMG_HDR $ORIG_IMG $KEY1 $HEADER_LUKS2_PV $DEV_LINK >/dev/null 2>&1 + umount $MNT_DIR > /dev/null 2>&1 + rmdir $MNT_DIR > /dev/null 2>&1 + LOOPDEV1="" + del_scsi_device +} + +function fail() +{ + [ -n "$1" ] && echo "$1" + echo "FAILED backtrace:" + while caller $frame; do ((frame++)); done + cd $START_DIR + remove_mapping + exit 2 +} + +function skip() +{ + [ -n "$1" ] && echo "$1" + exit 77 +} + +function valgrind_setup() +{ + command -v valgrind >/dev/null || fail "Cannot find valgrind." + [ ! -f $CRYPTSETUP_VALGRIND ] && fail "Unable to get location of cryptsetup executable." + export LD_LIBRARY_PATH="$CRYPTSETUP_LIB_VALGRIND:$LD_LIBRARY_PATH" +} + +function valgrind_run() +{ + INFOSTRING="$(basename ${BASH_SOURCE[1]})-line-${BASH_LINENO[0]}" ./valg.sh ${CRYPTSETUP_VALGRIND} "$@" +} + +function add_scsi_device() { + del_scsi_device + if [ -d /sys/module/scsi_debug ] ; then + echo "Cannot use scsi_debug module (in use or compiled-in), test skipped." + exit 77 + fi + modprobe scsi_debug $@ delay=0 >/dev/null 2>&1 + if [ $? -ne 0 ] ; then + echo "This kernel seems to not support proper scsi_debug module, test skipped." + exit 77 + fi + + sleep 2 + SCSI_DEV="/dev/"$(grep -l -e scsi_debug /sys/block/*/device/model | cut -f4 -d /) + [ -b $SCSI_DEV ] || fail "Cannot find $SCSI_DEV." +} + +function open_crypt() # $1 pwd, $2 hdr +{ + if [ -n "$2" ] ; then + echo "$1" | $CRYPTSETUP luksOpen $LOOPDEV1 $DEV_NAME --header $2 || fail + elif [ -n "$1" ] ; then + echo "$1" | $CRYPTSETUP luksOpen $LOOPDEV1 $DEV_NAME || fail + else + $CRYPTSETUP luksOpen -d $KEY1 $LOOPDEV1 $DEV_NAME || fail + fi +} + +function wipe_dev() # $1 dev +{ + dd if=/dev/zero of=$1 bs=256k >/dev/null 2>&1 +} + +function wipe() # $1 pass +{ + open_crypt $1 + wipe_dev /dev/mapper/$DEV_NAME + udevadm settle >/dev/null 2>&1 + $CRYPTSETUP luksClose $DEV_NAME || fail +} + +function prepare() # $1 dev1_siz +{ + remove_mapping + + dd if=/dev/zero of=$IMG bs=1k count=$1 >/dev/null 2>&1 + LOOPDEV1=$(losetup -f 2>/dev/null) + [ -z "$LOOPDEV1" ] && fail "No free loop device" + losetup $LOOPDEV1 $IMG + + if [ ! -e $KEY1 ]; then + dd if=/dev/urandom of=$KEY1 count=1 bs=32 >/dev/null 2>&1 + fi +} + +function check_hash_dev() # $1 dev, $2 hash +{ + HASH=$(sha256sum $1 | cut -d' ' -f 1) + [ $HASH != "$2" ] && fail "HASH differs ($HASH)" +} + +function check_hash() # $1 pwd, $2 hash, $3 hdr +{ + open_crypt $1 $3 + check_hash_dev /dev/mapper/$DEV_NAME $2 + $CRYPTSETUP remove $DEV_NAME || fail +} + +function backup_orig() +{ + sync + losetup -d $LOOPDEV1 + cp $IMG $ORIG_IMG + losetup $LOOPDEV1 $IMG +} + +function rollback() +{ + sync + losetup -d $LOOPDEV1 + cp $ORIG_IMG $IMG + losetup $LOOPDEV1 $IMG +} + +function check_slot() #space separated list of ENABLED key slots +{ + local _KS0=DISABLED + local _KS1=$_KS0 _KS2=$_KS0 _KS3=$_KS0 _KS4=$_KS0 _KS5=$_KS0 _KS6=$_KS0 _KS7=$_KS0 + local _tmp + + for _tmp in $*; do + eval _KS$_tmp=ENABLED + done + + local _out=$($CRYPTSETUP luksDump $LOOPDEV1 | grep -e "Key Slot" | cut -d ' ' -f 4) + + local _i=0 + for _tmp in $_out; do + eval local _orig="\${_KS${_i}}" + if [ "$_tmp" != "$_orig" ]; then + echo "Keyslot $_i is $_tmp, expected result: $_orig" + return 1 + fi + _i=$[_i+1] + done + + return 0 +} + +function simple_scsi_reenc() +{ + echo -n "$1" + echo $PWD1 | $CRYPTSETUP luksFormat --type luks1 $FAST_PBKDF $SCSI_DEV || fail + + echo $PWD1 | $CRYPTSETUP luksOpen $SCSI_DEV $DEV_NAME || fail + HASH=$(sha256sum /dev/mapper/$DEV_NAME | cut -d' ' -f 1) + $CRYPTSETUP luksClose $DEV_NAME || fail + + echo $PWD1 | $REENC -q $FAST_PBKDF $SCSI_DEV || fail + + echo $PWD1 | $CRYPTSETUP luksOpen $SCSI_DEV $DEV_NAME || fail + check_hash_dev /dev/mapper/$DEV_NAME $HASH + $CRYPTSETUP luksClose $DEV_NAME || fail +} + +function mount_and_test() { + test -d $MNT_DIR || mkdir -p $MNT_DIR + mount $@ $MNT_DIR 2>/dev/null || { + echo -n "failed to mount [SKIP]" + return 0 + } + rm $MNT_DIR/* 2>/dev/null + cd $MNT_DIR + + if [ "${REENC:0:1}" != "/" ] ; then + MNT_REENC=$START_DIR/$REENC + else + MNT_REENC=$REENC + fi + + echo $PWD2 | $MNT_REENC $LOOPDEV1 -q --use-fsync --use-directio --write-log $FAST_PBKDF || return 1 + cd $START_DIR + umount $MNT_DIR + echo -n [OK] +} + +function test_logging_tmpfs() { + echo -n "[tmpfs]" + mount_and_test -t tmpfs none -o size=$[25*1024*1024] || return 1 + echo +} + +function test_logging() { + echo -n "$1:" + for img in $(ls img_fs*img.xz) ; do + wipefs -a $SCSI_DEV > /dev/null + echo -n "[${img%.img.xz}]" + xz -d -c $img | dd of=$SCSI_DEV bs=4k >/dev/null 2>&1 + mount_and_test $SCSI_DEV || return 1 + done + echo +} + +function check_blkid() { + xz -dkf $HEADER_LUKS2_PV.xz + if ! $($CRYPTSETUP --version | grep -q "BLKID"); then + HAVE_BLKID=0 + elif $(blkid -p -n crypto_LUKS $HEADER_LUKS2_PV >/dev/null 2>&1); then + HAVE_BLKID=1 + else + HAVE_BLKID=0 + fi +} + +[ $(id -u) != 0 ] && skip "WARNING: You must be root to run this test, test skipped." +[ ! -x "$REENC_BIN" ] && skip "Cannot find $REENC_BIN, test skipped." +[ -n "$VALG" ] && valgrind_setup && CRYPTSETUP=valgrind_run +command -v wipefs >/dev/null || skip "Cannot find wipefs, test skipped." + +# REENCRYPTION tests + +HASH1=b69dae56a14d1a8314ed40664c4033ea0a550eea2673e04df42a66ac6b9faf2c +HASH2=d85ef2a08aeac2812a648deb875485a6e3848fc3d43ce4aa380937f08199f86b +HASH3=e4e5749032a5163c45125eccf3e8598ba5ed840df442c97e1d5ad4ad84359605 +HASH4=2daeb1f36095b44b318410b3f4e8b5d989dcc7bb023d1426c492dab0a3053e74 +HASH5=5f70bf18a086007016e948b04aed3b82103a36bea41755b6cddfaf10ace3c6ef + +echo "[1] Reencryption" +prepare 8192 +echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 -s 128 -c aes-cbc-plain $FAST_PBKDF --align-payload 4096 $LOOPDEV1 || fail +wipe $PWD1 +check_hash $PWD1 $HASH1 +echo $PWD1 | $REENC $LOOPDEV1 -q $FAST_PBKDF || fail +check_hash $PWD1 $HASH1 +echo $PWD1 | $REENC $LOOPDEV1 -q -s 256 $FAST_PBKDF || fail +check_hash $PWD1 $HASH1 +echo $PWD1 | $REENC $LOOPDEV1 -q -s 256 -c aes-xts-plain64 -h sha256 $FAST_PBKDF || fail +check_hash $PWD1 $HASH1 +echo $PWD1 | $REENC $LOOPDEV1 -q --use-directio $FAST_PBKDF || fail +check_hash $PWD1 $HASH1 +echo $PWD1 | $REENC $LOOPDEV1 -q --volume-key-file /dev/urandom $FAST_PBKDF || fail +check_hash $PWD1 $HASH1 +echo $PWD1 | $REENC $LOOPDEV1 -q -s 512 --volume-key-file /dev/urandom $FAST_PBKDF || fail +check_hash $PWD1 $HASH1 +$CRYPTSETUP --type luks1 luksDump $LOOPDEV1 > /dev/null || fail + +echo "[2] Reencryption with data shift" +echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 -c aes-cbc-essiv:sha256 -s 128 $FAST_PBKDF --align-payload 2048 $LOOPDEV1 || fail +wipe $PWD1 +echo $PWD1 | $REENC $LOOPDEV1 -q -s 256 --reduce-device-size 1024S $FAST_PBKDF || fail +check_hash $PWD1 $HASH2 +echo $PWD1 | $REENC $LOOPDEV1 -q $FAST_PBKDF || fail +check_hash $PWD1 $HASH2 +$CRYPTSETUP --type luks1 luksDump $LOOPDEV1 > /dev/null || fail + +echo "[3] Reencryption with keyfile" +echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 -d $KEY1 -c aes-cbc-essiv:sha256 -s 128 $FAST_PBKDF --align-payload 4096 $LOOPDEV1 || fail +wipe +check_hash "" $HASH1 +echo $PWD1 | $CRYPTSETUP -q luksAddKey -d $KEY1 $LOOPDEV1 $FAST_PBKDF || fail +$REENC $LOOPDEV1 -d $KEY1 $FAST_PBKDF -q 2>/dev/null && fail +$REENC $LOOPDEV1 -d $KEY1 -S 0 $FAST_PBKDF -q || fail +check_hash "" $HASH1 +check_slot 0 || fail "Only keyslot 0 expected to be enabled" +$REENC $LOOPDEV1 -d $KEY1 $FAST_PBKDF -q || fail +# FIXME echo $PWD1 | $REENC ... + +echo "[4] Encryption of not yet encrypted device" +# Encrypt without size reduction must not allow header device same as data device +wipe_dev $LOOPDEV1 +echo $PWD1 | $REENC $LOOPDEV1 --type luks1 --new --header $LOOPDEV1 -q $FAST_PBKDF_ARGON 2>/dev/null && fail +$CRYPTSETUP isLUKS $LOOPDEV1 2>/dev/null && fail +ln -s $LOOPDEV1 $DEV_LINK || fail +echo $PWD1 | $REENC $LOOPDEV1 --type luks1 --new --header $DEV_LINK -q $FAST_PBKDF_ARGON 2>/dev/null && fail +$CRYPTSETUP isLUKS $LOOPDEV1 2>/dev/null && fail +rm -f $DEV_LINK || fail +echo $PWD1 | $REENC $IMG --type luks1 --new --header $IMG -q $FAST_PBKDF_ARGON 2>/dev/null && fail +$CRYPTSETUP isLUKS $IMG 2>/dev/null && fail +ln -s $IMG $DEV_LINK || fail +echo $PWD1 | $REENC $IMG --type luks1 --new --header $DEV_LINK -q $FAST_PBKDF_ARGON 2>/dev/null && fail +$CRYPTSETUP isLUKS $IMG 2>/dev/null && fail + +if [ ! fips_mode ]; then +# well, movin' zeroes :-) +OFFSET=2048 +SIZE=$(blockdev --getsz $LOOPDEV1) +dmsetup create $DEV_NAME2 --table "0 $(($SIZE - $OFFSET)) linear $LOOPDEV1 0" || fail +check_hash_dev /dev/mapper/$DEV_NAME2 $HASH3 +dmsetup remove --retry $DEV_NAME2 || fail +echo $PWD1 | $REENC $LOOPDEV1 -c aes-cbc-essiv:sha256 -s 128 --new --type luks1 --reduce-device-size "$OFFSET"S -q $FAST_PBKDF || fail +check_hash $PWD1 $HASH3 +$CRYPTSETUP --type luks1 luksDump $LOOPDEV1 > /dev/null || fail +# 64MiB + 1 KiB +prepare 65537 +OFFSET=131072 +SIZE=$(blockdev --getsz $LOOPDEV1) +wipe_dev $LOOPDEV1 +dmsetup create $DEV_NAME2 --table "0 $(($SIZE - $OFFSET)) linear $LOOPDEV1 0" || fail +check_hash_dev /dev/mapper/$DEV_NAME2 $HASH5 +dmsetup remove --retry $DEV_NAME2 || fail +echo $PWD1 | $REENC $LOOPDEV1 -c aes-cbc-essiv:sha256 -s 128 --new --type luks1 --reduce-device-size "$OFFSET"S -q $FAST_PBKDF || fail +check_hash $PWD1 $HASH5 +$CRYPTSETUP --type luks1 luksDump $LOOPDEV1 > /dev/null || fail +prepare 8192 +OFFSET=4096 +echo fake | $REENC $LOOPDEV1 -d $KEY1 --new --type luks1 --reduce-device-size "$OFFSET"S -q $FAST_PBKDF || fail +$CRYPTSETUP open --test-passphrase $LOOPDEV1 -d $KEY1 || fail +wipe_dev $LOOPDEV1 +fi + +echo "[5] Reencryption using specific keyslot" +echo $PWD2 | $CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF $LOOPDEV1 || fail +echo -e "$PWD2\n$PWD1" | $CRYPTSETUP -q luksAddKey $FAST_PBKDF -S 1 $LOOPDEV1 || fail +echo -e "$PWD2\n$PWD2" | $CRYPTSETUP -q luksAddKey $FAST_PBKDF -S 2 $LOOPDEV1 || fail +echo -e "$PWD2\n$PWD1" | $CRYPTSETUP -q luksAddKey $FAST_PBKDF -S 3 $LOOPDEV1 || fail +echo -e "$PWD2\n$PWD2" | $CRYPTSETUP -q luksAddKey $FAST_PBKDF -S 4 $LOOPDEV1 || fail +echo -e "$PWD2\n$PWD1" | $CRYPTSETUP -q luksAddKey $FAST_PBKDF -S 5 $LOOPDEV1 || fail +echo -e "$PWD2\n$PWD2" | $CRYPTSETUP -q luksAddKey $FAST_PBKDF -S 6 $LOOPDEV1 || fail +echo -e "$PWD2\n$PWD3" | $CRYPTSETUP -q luksAddKey $FAST_PBKDF -S 7 $LOOPDEV1 || fail +backup_orig +echo $PWD2 | $REENC $FAST_PBKDF -S 0 -q $LOOPDEV1 || fail +check_slot 0 || fail "Only keyslot 0 expected to be enabled" +wipe $PWD2 +rollback +echo $PWD1 | $REENC $FAST_PBKDF -S 1 -q $LOOPDEV1 || fail +check_slot 1 || fail "Only keyslot 1 expected to be enabled" +wipe $PWD1 +rollback +echo $PWD2 | $REENC $FAST_PBKDF -S 6 -q $LOOPDEV1 || fail +check_slot 6 || fail "Only keyslot 6 expected to be enabled" +wipe $PWD2 +rollback +echo $PWD3 | $REENC $FAST_PBKDF -S 7 -q $LOOPDEV1 || fail +check_slot 7 || fail "Only keyslot 7 expected to be enabled" +wipe $PWD3 +rollback +echo $PWD3 | $REENC $FAST_PBKDF -S 8 -q $LOOPDEV1 2>/dev/null && fail +$CRYPTSETUP luksDump $LOOPDEV1 > /dev/null || fail + +echo "[6] Reencryption using all active keyslots" +echo -e "$PWD2\n$PWD1\n$PWD2\n$PWD1\n$PWD2\n$PWD1\n$PWD2\n$PWD3" | $REENC -q $LOOPDEV1 $FAST_PBKDF || fail +check_slot 0 1 2 3 4 5 6 7 || fail "All keyslots expected to be enabled" + +echo "[7] Reencryption of block devices with different block size" +add_scsi_device sector_size=512 dev_size_mb=8 +simple_scsi_reenc "[512 sector]" +add_scsi_device sector_size=4096 dev_size_mb=8 +simple_scsi_reenc "[4096 sector]" +add_scsi_device sector_size=512 physblk_exp=3 dev_size_mb=8 +simple_scsi_reenc "[4096/512 sector]" +echo "[OK]" + +echo "[8] Header only reencryption (hash and iteration time)" +echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 --hash sha512 $FAST_PBKDF $LOOPDEV1 || fail +wipe $PWD1 +check_hash $PWD1 $HASH1 +echo $PWD1 | $REENC $LOOPDEV1 -q --keep-key || fail +check_hash $PWD1 $HASH1 +echo $PWD1 | $REENC $LOOPDEV1 -q --keep-key --pbkdf-force-iterations 999 2>/dev/null && fail +check_hash $PWD1 $HASH1 +echo $PWD1 | $REENC $LOOPDEV1 -q --keep-key --hash sha256 --pbkdf-force-iterations 1001 || fail +check_hash $PWD1 $HASH1 +[ "$($CRYPTSETUP luksDump $LOOPDEV1 | grep -A1 -m1 "Key Slot 0" | grep Iterations: | sed -e 's/[[:space:]]\+Iterations:\ \+//g')" -eq 1001 ] || fail +[ "$($CRYPTSETUP luksDump $LOOPDEV1 | grep -m1 "Hash spec:" | cut -f2)" = "sha256" ] || fail +echo $PWD1 | $REENC $LOOPDEV1 -q --keep-key --hash sha512 $FAST_PBKDF || fail +check_hash $PWD1 $HASH1 +[ "$($CRYPTSETUP luksDump $LOOPDEV1 | grep -A1 -m1 "Key Slot 0" | grep Iterations: | sed -e 's/[[:space:]]\+Iterations:\ \+//g')" -eq 1000 ] || fail +echo $PWD1 | $REENC $LOOPDEV1 -q --keep-key $FAST_PBKDF || fail +check_hash $PWD1 $HASH1 +$CRYPTSETUP --type luks1 luksDump $LOOPDEV1 > /dev/null || fail + +echo "[9] Test log I/Os on various underlying block devices" +prepare 8192 +echo $PWD2 | $CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF $LOOPDEV1 || fail +add_scsi_device sector_size=512 dev_size_mb=32 +test_logging "[512 sector]" || fail +add_scsi_device sector_size=4096 dev_size_mb=32 +test_logging "[4096 sector]" || fail +add_scsi_device sector_size=512 dev_size_mb=32 physblk_exp=3 +test_logging "[4096/512 sector]" || fail +test_logging_tmpfs || fail + +if [ ! fips_mode ]; then +echo "[10] Removal of encryption" +prepare 8192 +echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF $LOOPDEV1 || fail +wipe $PWD1 +check_hash $PWD1 $HASH1 +echo $PWD1 | $REENC $LOOPDEV1 -q --decrypt || fail +check_hash_dev $LOOPDEV1 $HASH4 + +echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 -S5 $FAST_PBKDF $LOOPDEV1 || fail +wipe $PWD1 +check_hash $PWD1 $HASH1 +echo $PWD1 | $REENC $LOOPDEV1 -q --decrypt || fail +check_hash_dev $LOOPDEV1 $HASH4 + +echo "[11] Detached header - adding encryption/reencryption/decryption" +prepare 8192 +check_hash_dev $IMG $HASH4 +echo $PWD1 | $REENC $LOOPDEV1 -q $FAST_PBKDF --header $IMG_HDR --new --type luks1 +check_hash $PWD1 $HASH4 $IMG_HDR +echo $PWD1 | $REENC $LOOPDEV1 -q $FAST_PBKDF --header $IMG_HDR || fail +check_hash $PWD1 $HASH4 $IMG_HDR +echo $PWD1 | $REENC $LOOPDEV1 -q --header $IMG_HDR --decrypt || fail +check_hash_dev $IMG $HASH4 +# existing header of zero size +cat /dev/null >$IMG_HDR +echo $PWD1 | $REENC $LOOPDEV1 -q $FAST_PBKDF --header $IMG_HDR --new --type luks1 +check_hash $PWD1 $HASH4 $IMG_HDR +$CRYPTSETUP isLuks $LOOPDEV1 && fail +$CRYPTSETUP isLuks $IMG_HDR || fail + +echo "[12] Prevent nested encryption" +prepare 8192 +echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF $LOOPDEV1 || fail + +#data device is already LUKS device (prevent nested encryption) +echo $PWD1 | $REENC $LOOPDEV1 -q $FAST_PBKDF --new --type luks1 --reduce-device-size 1024S 2>/dev/null && fail +echo $PWD1 | $REENC $LOOPDEV1 -q $FAST_PBKDF --new --type luks1 --header $IMG_HDR 2>/dev/null && fail +test -f $IMG_HDR && fail +echo $PWD1 | $REENC $LOOPDEV1 -q $FAST_PBKDF --new --type luks2 --reduce-device-size 2048S 2>/dev/null && fail +echo $PWD1 | $REENC $LOOPDEV1 -q $FAST_PBKDF --new --type luks2 --header $IMG_HDR 2>/dev/null && fail +test -f $IMG_HDR && fail + +wipe_dev $LOOPDEV1 +echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 --header $IMG_HDR $FAST_PBKDF $LOOPDEV1 || fail + +echo $PWD1 | $REENC $LOOPDEV1 -q $FAST_PBKDF --new --type luks1 --header $IMG_HDR 2>/dev/null && fail +echo $PWD1 | $REENC $LOOPDEV1 -q $FAST_PBKDF --new --type luks2 --header $IMG_HDR 2>/dev/null && fail + +check_blkid +if [ "$HAVE_BLKID" -gt 0 ]; then + echo "[13] Prevent nested encryption of broken LUKS device" + rm -f $IMG_HDR + wipe_dev $LOOPDEV1 + xz -dkf $HEADER_LUKS2_PV.xz + # broken header + echo $PWD1 | $REENC --header $HEADER_LUKS2_PV $LOOPDEV1 -q $FAST_PBKDF --new --type luks1 2>/dev/null && fail + $CRYPTSETUP isLuks $HEADER_LUKS2_PV && fail + # broken device + echo $PWD1 | $REENC $HEADER_LUKS2_PV -q $FAST_PBKDF --new --type luks1 --reduce-device-size 1024S 2>/dev/null && fail + $CRYPTSETUP isLuks $HEADER_LUKS2_PV && fail + # broken data device only + echo $PWD1 | $REENC --header $IMG_HDR $HEADER_LUKS2_PV -q $FAST_PBKDF --new --type luks1 2>/dev/null && fail + test -f $IMG_HDR && fail +fi +fi # if [ ! fips_mode ] + +remove_mapping +exit 0 |