diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-27 21:06:40 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-27 21:06:40 +0000 |
commit | d827c6cf1631209f5042a9d1d8a7ecc24223c8a0 (patch) | |
tree | 91a431d301efd0e524bdfb0c46e97d591a9d7b03 /debhelper.pod | |
parent | Initial commit. (diff) | |
download | debhelper-upstream/13.11.4.tar.xz debhelper-upstream/13.11.4.zip |
Adding upstream version 13.11.4.upstream/13.11.4upstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to '')
-rw-r--r-- | debhelper.pod | 938 |
1 files changed, 938 insertions, 0 deletions
diff --git a/debhelper.pod b/debhelper.pod new file mode 100644 index 0000000..29a37f7 --- /dev/null +++ b/debhelper.pod @@ -0,0 +1,938 @@ +=encoding UTF-8 + +=head1 NAME + +debhelper - the debhelper tool suite + +=head1 SYNOPSIS + +B<dh_>I<*> [B<-v>] [B<-a>] [B<-i>] [B<--no-act>] [B<-p>I<package>] [B<-N>I<package>] [B<-P>I<tmpdir>] + +=head1 DESCRIPTION + +Debhelper is used to help you build a Debian package. The philosophy behind +debhelper is to provide a collection of small, simple, and easily +understood tools that are used in F<debian/rules> to automate various common +aspects of building a package. This means less work for you, the packager. +It also, to some degree means that these tools can be changed if Debian +policy changes, and packages that use them will require only a rebuild to +comply with the new policy. + +A typical F<debian/rules> file that uses debhelper will call several debhelper +commands in sequence, or use L<dh(1)> to automate this process. Examples of +rules files that use debhelper are in F</usr/share/doc/debhelper/examples/> + +To create a new Debian package using debhelper, you can just copy one of +the sample rules files and edit it by hand. Or you can try the B<dh-make> +package, which contains a L<dh_make|dh_make(1)> command that partially +automates the process. For a more gentle introduction, the B<maint-guide> Debian +package contains a tutorial about making your first package using debhelper. + +Except where the tool explicitly denotes otherwise, all of the debhelper +tools assume that they run from the root directory of an unpacked source +package. This is so they can locate find files like F<debian/control> +when needed. + +=head1 DEBHELPER COMMANDS + +Here is the list of debhelper commands you can use. See their man +pages for additional documentation. + +=over 4 + +#LIST# + +=back + +=head2 Deprecated Commands + +A few debhelper commands are deprecated and should not be used. + +=over 4 + +#LIST_DEPRECATED# + +=back + +=head2 Other Commands + +If a program's name starts with B<dh_>, and the program is not on the above +lists, then it is not part of the debhelper package, but it should still +work like the other programs described on this page. + +=head1 DEBHELPER CONFIG FILES + +Many debhelper commands make use of files in F<debian/> to control what they +do. Besides the common F<debian/changelog> and F<debian/control>, which are +in all packages, not just those using debhelper, some additional files can +be used to configure the behavior of specific debhelper commands. These +files are typically named debian/I<package>.foo (where I<package> of course, +is replaced with the package that is being acted on). + +For example, B<dh_installdocs> uses files named F<debian/package.docs> to list +the documentation files it will install. See the man pages of individual +commands for details about the names and formats of the files they use. +Generally, these files will list files to act on, one file per line. Some +programs in debhelper use pairs of files and destinations or slightly more +complicated formats. + +Note for the first (or only) binary package listed in +F<debian/control>, debhelper will use F<debian/foo> when there's no +F<debian/I<package>.foo> file. However, it is often a good idea to keep +the F<I<package>.> prefix as it is more explicit. The primary exception +to this are files that debhelper by default installs in every binary +package when it does not have a package prefix (such as +F<debian/copyright> or F<debian/changelog>). + +In some rare cases, you may want to have different versions of these files +for different architectures or OSes. If files named debian/I<package>.foo.I<ARCH> +or debian/I<package>.foo.I<OS> exist, where I<ARCH> and I<OS> are the same as the +output of "B<dpkg-architecture -qDEB_HOST_ARCH>" / +"B<dpkg-architecture -qDEB_HOST_ARCH_OS>", +then they will be used in preference to other, more general files. + +Mostly, these config files are used to specify lists of various types of +files. Documentation or example files to install, files to move, and so on. +When appropriate, in cases like these, you can use standard shell wildcard +characters (B<?> and B<*> and B<[>I<..>B<]> character classes) in the files. +You can also put comments in these files; lines beginning with B<#> are +ignored. + +The syntax of these files is intentionally kept very simple to make them +easy to read, understand, and modify. + +=head2 Substitutions in debhelper config files + +In compatibility level 13 and later, it is possible to use simple +substitutions in debhelper config files for the following tools: + +=over 4 + +=item * + +dh_clean + +=item * + +dh_install + +=item * + +dh_installcatalogs + +=item * + +dh_installdeb + +=item * + +dh_installdirs + +=item * + +dh_installdocs + +=item * + +dh_installexamples + +=item * + +dh_installinfo + +=item * + +dh_installman + +=item * + +dh_installwm + +=item * + +dh_link + +=item * + +dh_missing + +=item * + +dh_ucf + +=back + +All substitution variables are of the form I<${foo}> and the braces +are mandatory. Variable names are case-sensitive and consist of +alphanumerics (a-zA-Z0-9), hyphens (-), underscores (_), and colons (:). +The first character must be an alphanumeric. + +If you need a literal dollar sign that cannot trigger a substitution, +you can either use the B<${Dollar}> substitution or the sequence B<${}>. + +The following expansions are available: + +=over 4 + +=item B<DEB_HOST_*>, B<DEB_BUILD_*>, B<DEB_TARGET_*> + +Expands to the relevant L<dpkg-architecture(1)> value (similar to +I<dpkg-architecture -qVARIABLE_HERE>). + +When in doubt, the B<DEB_HOST_*> variant is the one that will work both +for native and cross builds. + +For performance reasons, debhelper will attempt to resolve these +names from the environment first before consulting +L<dpkg-architecture(1)>. This is mostly mentioned for completeness +as it will not matter for most cases. + +=item B<Dollar> + +Expands to a single literal B<$>-symbol. This symbol will I<never> +be considered part of a substitution variable. That is: + + # Triggers an error + ${NO_SUCH_TOKEN} + # Expands to the literal value "${NO_SUCH_TOKEN}" + ${Dollar}{NO_SUCH_TOKEN} + +This variable equivalent to the sequence B<${}> and the two can be +used interchangeably. + +=item B<Newline>, B<Space>, B<Tab> + +Expands to a single ASCII newline, space and tab respectively. + +This can be useful if you need to include a literal whitespace +character (e.g. space) where it would otherwise be stripped or +used as a separator. + +=item B<< env:I<NAME> >> + +Expands to the environment variable I<NAME>. The environment +variable must be set (but can be set to the empty string). + +=back + +Note that all variables must expand to a defined value. As an example, +if debhelper sees I<${env:FOO}>, then it will insist that the environment +variable I<FOO> is set (it can be set to the empty string). + +=head3 Substitution limits + +To avoid infinite loops and resource exhaustion, debhelper will stop +with an error if the text contains many substitution variables (50) or +they expand beyond a certain size (4096 characters or 3x length of +the original input - whichever is bigger). + +=head2 Executable debhelper config files + +If you need additional flexibility, many of the debhelper tools +(e.g. L<dh_install(1)>) support executing a config file as a script. + +To use this feature, simply mark the config file as executable +(e.g. B<< chmod +x debian/I<package>.install >>) and the tool will +attempt to execute it and use the output of the script. In many +cases, you can use L<dh-exec(1)> as interpreter of the config file to +retain most of the original syntax while getting the additional +flexibility you need. + + +When using executable debhelper config files, please be aware of the +following: + +=over 4 + +=item * + +The executable config file B<must> exit with success (i.e. its return +code should indicate success). + +=item * + +In compatibility level 13+, the output will be subject to substitutions +(see L</Substitutions in debhelper config files>) where the tool +support these. Remember to be careful if your generator I<also> provides +substitutions as this can cause unnecessary confusion. + +Otherwise, the output will be used exactly as-is. Notably, debhelper +will I<not> expand wildcards or strip comments or strip whitespace +in the output. + +=back + +If you need the package to build on a file system where you cannot +disable the executable bit, then you can use L<dh-exec(1)> and its +B<strip-output> script. + +=head1 SHARED DEBHELPER OPTIONS + +The following command line options are supported by all debhelper programs. + +=over 4 + +=item B<-v>, B<--verbose> + +Verbose mode: show commands that modify the package build directory. + +Note that verbose mode may also output other "internal" commands that do not +directly affect the package build directory. + +=item B<--no-act> + +Do not really do anything. If used with -v, the result is that the command +will output what it would have done. + +=item B<-a>, B<--arch> + +Act on architecture dependent packages that should be built for the +B<DEB_HOST_ARCH> architecture. + +=item B<-i>, B<--indep> + +Act on all architecture independent packages. + +=item B<-p>I<package>, B<--package=>I<package> + +Act on the package named I<package>. This option may be specified multiple +times to make debhelper operate on a given set of packages. + +=item B<-s>, B<--same-arch> + +Deprecated alias of B<-a>. + +This option is removed in compat 12. + +=item B<-N>I<package>, B<--no-package=>I<package> + +Do not act on the specified package even if an B<-a>, B<-i>, or B<-p> option lists +the package as one that should be acted on. + +=item B<--remaining-packages> + +Do not act on the packages which have already been acted on by this debhelper +command earlier (i.e. if the command is present in the package debhelper log). +For example, if you need to call the command with special options only for a +couple of binary packages, pass this option to the last call of the command to +process the rest of packages with default settings. + +=item B<-P>I<tmpdir>, B<--tmpdir=>I<tmpdir> + +Use I<tmpdir> for package build directory. The default is debian/I<package> + +=item B<--mainpackage=>I<package> + +This little-used option changes the package which debhelper considers the +"main package", that is, the first one listed in F<debian/control>, and the +one for which F<debian/foo> files can be used instead of the usual +F<debian/package.foo> files. + +=item B<-O=>I<option>|I<bundle> + +This is used by L<dh(1)> when passing user-specified options to all the +commands it runs. If the command supports the specified option or option +bundle, it will take effect. If the command does not support the option (or +any part of an option bundle), it will be ignored. + +=back + +=head1 COMMON DEBHELPER OPTIONS + +The following command line options are supported by some debhelper programs. +See the man page of each program for a complete explanation of what each +option does. + +=over 4 + +=item B<-n> + +Do not modify F<postinst>, F<postrm>, etc. scripts. + +=item B<-X>I<item>, B<--exclude=>I<item> + +Exclude an item from processing. This option may be used multiple times, +to exclude more than one thing. The I<item> is typically part of a +filename, and any file containing the specified text will be excluded. + +=item B<-A>, B<--all> + +Makes files or other items that are specified on the command line take effect +in ALL packages acted on, not just the first. + +=back + +=head1 BUILD SYSTEM OPTIONS + +The following command line options are supported by all of the B<dh_auto_>I<*> +debhelper programs. These programs support a variety of build systems, +and normally heuristically determine which to use, and how to use them. +You can use these command line options to override the default behavior. +Typically these are passed to L<dh(1)>, which then passes them to all the +B<dh_auto_>I<*> programs. + +=over 4 + +=item B<-S>I<buildsystem>, B<--buildsystem=>I<buildsystem> + +Force use of the specified I<buildsystem>, instead of trying to auto-select +one which might be applicable for the package. + +Pass B<none> as I<buildsystem> to disable auto-selection. + +=item B<-D>I<directory>, B<--sourcedir=>I<directory>, B<--sourcedirectory=>I<directory> + +Assume that the original package source tree is at the specified +I<directory> rather than the top level directory of the Debian +source package tree. + +B<Warning>: The B<--sourcedir> variant matches a similar named option in +B<dh_install> and B<dh_missing> (etc.) for historical reasons. While they +have a similar name, they have very distinct purposes and in some cases +it can cause errors when this variant is passed to B<dh> (when then passes +it on to all tools). + +=item B<-B>[I<directory>], B<--builddir>[I<=directory>], B<--builddirectory>[I<=directory>] + +Enable out of source building and use the specified I<directory> as the build +directory. If I<directory> parameter is omitted, a default build directory +will be chosen. + +If this option is not specified, building will be done in source by default +unless the build system requires or prefers out of source tree building. +In such a case, the default build directory will be used even if +B<--builddirectory> is not specified. + +If the build system prefers out of source tree building but still +allows in source building, the latter can be re-enabled by passing a build +directory path that is the same as the source directory path. + +=item B<--parallel>, B<--no-parallel> + +Control whether parallel builds should be used if underlying build +system supports them. The number of parallel jobs is controlled by +the B<DEB_BUILD_OPTIONS> environment variable (L<Debian Policy, +section 4.9.1>) at build time. It might also be subject to a build +system specific limit. + +If neither option is specified, debhelper currently defaults to +B<--parallel> in compat 10 (or later) and B<--no-parallel> otherwise. + +As an optimization, B<dh> will try to avoid passing these options to +subprocesses, if they are unnecessary and the only options passed. +Notably this happens when B<DEB_BUILD_OPTIONS> does not have a +I<parallel> parameter (or its value is 1). + +=item B<--max-parallel=>I<maximum> + +This option implies B<--parallel> and allows further limiting the number of +jobs that can be used in a parallel build. If the package build is known to +only work with certain levels of concurrency, you can set this to the maximum +level that is known to work, or that you wish to support. + +Notably, setting the maximum to 1 is effectively the same as using +B<--no-parallel>. + +=item B<--reload-all-buildenv-variables> + +By default, L<dh(1)> will compute several environment variables (e.g. by +using L<dpkg-buildflags(1)>) and cache them to avoid having all B<dh_auto_*> +tool recompute them. + +When passing this option, the concrete B<dh_auto_*> tool will ignore +the cache from L<dh(1)> and retrigger a rebuild of these variables. +This is useful in the very rare case where the package need to do +multiple builds but with different B<...FLAGS> options. A concrete +example would be needing to change the B<-O> parameter in B<CFLAGS> in +the second build: + + export DEB_CFLAGS_MAINT_APPEND=-O3 + + %: + dh $@ + + override_dh_auto_configure: + dh_auto_configure -Bbuild-deb ... + DEB_CFLAGS_MAINT_APPEND=-Os dh_auto_configure \ + --reload-all-buildenv-variables -Bbuild-udeb ... + +Without B<--reload-all-buildenv-variables> in the second call to +L<dh_auto_configure(1)>, the change in B<DEB_CFLAGS_MAINT_APPEND> +would be ignored as L<dh_auto_configure(1)> would use the cached value +of B<CFLAGS> set by L<dh(1)>. + +This option is only available with B<< debhelper (>= 12.7~) >> when +the package uses compatibility level 9 or later. + +=item B<--list>, B<-l> + +List all build systems supported by debhelper on this system. The list +includes both default and third party build systems (marked as such). Also +shows which build system would be automatically selected, or which one +is manually specified with the B<--buildsystem> option. + +=back + +=head1 COMPATIBILITY LEVELS + +From time to time, major non-backwards-compatible changes need to be made +to debhelper, to keep it clean and well-designed as needs change and its +author gains more experience. To prevent such major changes from breaking +existing packages, the concept of debhelper compatibility levels was +introduced. You must tell debhelper which compatibility level it should use, and +it modifies its behavior in various ways. + +In current debhelper, you can specify the compatibility level in +F<debian/control> by adding a Build-Depends on the debhelper-compat package. +For example, to use v#RECOMMENDED_COMPAT# mode, ensure F<debian/control> has: + + Build-Depends: debhelper-compat (= #RECOMMENDED_COMPAT#) + +This also serves as an appropriate versioned build dependency on a sufficient +version of the debhelper package, so you do not need to specify a separate +versioned build dependency on the debhelper package unless you need a specific +point release of debhelper (such as for the introduction of a new feature or +bugfix within a compatibility level). + +Note that debhelper does not provide debhelper-compat for experimental or beta +compatibility levels; packages experimenting with those compatibility levels +should use F<debian/compat> (or, if only for selected commands, B<DH_COMPAT>). + +Prior versions of debhelper required specifying the compatibility level in the +file F<debian/compat>, and current debhelper still supports this for backward +compatibility. To use this method, the F<debian/compat> file should contain +the compatibility level as a single number, and no other content. If you +specify the compatibility level by this method, your package will also need a +versioned build dependency on a version of the debhelper package equal to (or +greater than) the compatibility level your package uses. So, if you specify +compatibility level #RECOMMENDED_COMPAT# in F<debian/compat>, ensure +F<debian/control> has: + + Build-Depends: debhelper (>= #RECOMMENDED_COMPAT#~) + +Note that you must use either the build-dependency on debhelper-compat or +the F<debian/compat> file. Whenever possible, the debhelper-compat +build-dependency is recommended. + +If needed be, the B<DH_COMPAT> environment variable can be used to override +the compat level for a given command. The feature is mostly useful for +either temporarily upgrading a few commands to a new compat level or +keeping a few commands on a lower compat level. The feature is best used +sparingly as it effectively introduces special-cases into the +F<debian/rules> file that may be surprising to maintainers or reviewers +(or, in the long term, to yourself). + +Unless otherwise indicated, all debhelper documentation assumes that you +are using the most recent compatibility level, and in most cases does not +indicate if the behavior is different in an earlier compatibility level, so +if you are not using the most recent compatibility level, you're advised to +read below for notes about what is different in earlier compatibility +levels. + +=head2 Supported compatibility levels + +The list of supported compatibility levels and the related upgrade check +list has moved to L<debhelper-compat-upgrade-checklist(7)>. + +=head1 NOTES + +=head2 Multiple binary package support + +If your source package generates more than one binary package, debhelper +programs will default to acting on all binary packages when run. If your +source package happens to generate one architecture dependent package, and +another architecture independent package, this is not the correct behavior, +because you need to generate the architecture dependent packages in the +binary-arch F<debian/rules> target, and the architecture independent packages +in the binary-indep F<debian/rules> target. + +To facilitate this, as well as give you more control over which packages +are acted on by debhelper programs, all debhelper programs accept the +B<-a>, B<-i>, B<-p>, and B<-s> parameters. These parameters are cumulative. +If none are given, debhelper programs default to acting on all packages listed +in the control file, with the exceptions below. + +First, any package whose B<Architecture> field in B<debian/control> does not +match the B<DEB_HOST_ARCH> architecture will be excluded +(L<Debian Policy, section 5.6.8>). + +Also, some additional packages may be excluded based on the contents of the +B<DEB_BUILD_PROFILES> environment variable and B<Build-Profiles> fields in +binary package stanzas in B<debian/control>, according to the draft policy at +L<https://wiki.debian.org/BuildProfileSpec>. + +=head3 Interaction between package selections and Build-Profiles + +Build-Profiles affect which packages are included in the package +selections mechanisms in debhelper. Generally, the package selections +are described from the assumption that all packages are enabled. This +section describes how the selections react when a package is disabled +due to the active Build-Profiles (or lack of active Build-Profiles). + +=over 4 + +=item -a/--arch, -i/--indep OR no selection options (a raw "dh_X" call) + +The package disabled by Build-Profiles is silently excluded from the +selection. + +Note you will receive a warning if I<all> packages related to these +selections are disabled. In that case, it generally does not make +sense to do the build in the first place. + +=item -N I<package> / --no-package I<package> + +The option is accepted and effectively does nothing. + +=item -p I<package> / --package I<package> + +The option is accepted, but debhelper will not act on the package. + +=back + +Note that it does not matter whether a package is enabled or disabled +by default. + +=head2 Automatic generation of Debian install scripts + +Some debhelper commands will automatically generate parts of Debian +maintainer scripts. If you want these automatically generated things +included in your existing Debian maintainer scripts, then you need to add +B<#DEBHELPER#> to your scripts, in the place the code should be added. +B<#DEBHELPER#> will be replaced by any auto-generated code when you run +B<dh_installdeb>. + +If a script does not exist at all and debhelper needs to add something to +it, then debhelper will create the complete script. + +All debhelper commands that automatically generate code in this way let it +be disabled by the -n parameter (see above). + +Note that the inserted code will be shell code, so you cannot directly use +it in a Perl script. If you would like to embed it into a Perl script, here +is one way to do that (note that I made sure that $1, $2, etc are set with +the set command): + + my $temp="set -e\nset -- @ARGV\n" . << 'EOF'; + #DEBHELPER# + EOF + if (system($temp)) { + my $exit_code = ($? >> 8) & 0xff; + my $signal = $? & 0x7f; + if ($exit_code) { + die("The debhelper script failed with error code: ${exit_code}"); + } else { + die("The debhelper script was killed by signal: ${signal}"); + } + } + +=head2 Automatic generation of miscellaneous dependencies. + +Some debhelper commands may make the generated package need to depend on +some other packages. For example, if you use L<dh_installdebconf(1)>, your +package will generally need to depend on debconf. Or if you use +L<dh_installxfonts(1)>, your package will generally need to depend on a +particular version of xutils. Keeping track of these miscellaneous +dependencies can be annoying since they are dependent on how debhelper does +things, so debhelper offers a way to automate it. + +All commands of this type, besides documenting what dependencies may be +needed on their man pages, will automatically generate a substvar called +B<${misc:Depends}>. If you put that token into your F<debian/control> file, it +will be expanded to the dependencies debhelper figures you need. + +This is entirely independent of the standard B<${shlibs:Depends}> generated by +L<dh_makeshlibs(1)>, and the B<${perl:Depends}> generated by L<dh_perl(1)>. +You can choose not to use any of these, if debhelper's guesses don't match +reality. + +=head2 Package build directories + +By default, all debhelper programs assume that the temporary directory used +for assembling the tree of files in a package is debian/I<package>. + +Sometimes, you might want to use some other temporary directory. This is +supported by the B<-P> flag. For example, "B<dh_installdocs -Pdebian/tmp>", will +use B<debian/tmp> as the temporary directory. Note that if you use B<-P>, the +debhelper programs can only be acting on a single package at a time. So if +you have a package that builds many binary packages, you will need to also +use the B<-p> flag to specify which binary package the debhelper program will +act on. + +=head2 udebs + +Debhelper includes support for udebs. To create a udeb with debhelper, +add "B<Package-Type: udeb>" to the package's stanza in F<debian/control>. +Debhelper will try to create udebs that comply with debian-installer +policy, by making the generated package files end in F<.udeb>, not +installing any documentation into a udeb, skipping over +F<preinst>, F<postrm>, F<prerm>, and F<config> scripts, etc. + +=head1 ENVIRONMENT + +This section describes some of the environment variables that influences +the behaviour of debhelper or which debhelper interacts with. + +It is important to note that these must be actual environment variables in +order to affect the behaviour of debhelper (not simply F<Makefile> variables). +To specify them properly in F<debian/rules>, be sure to "B<export>" them. For +example, "B<export DH_VERBOSE>". + +=over 4 + +=item B<DH_VERBOSE> + +Set to a non-empty value to enable verbose mode. Please see the B<-v> / B<--verbose> +option for details. + +=item B<DH_QUIET> + +Set to a non-empty value to enable quiet mode. Debhelper will not output commands calling +the upstream build system nor will dh print which subcommands are called +and depending on the upstream build system might make that more quiet, too. +This makes it easier to spot important messages but makes the output quite +useless as buildd log. + +Ignored if DH_VERBOSE is also set or B<-v> / B<--verbose> is passed. + +=item B<DH_COMPAT> + +Temporarily specifies what compatibility level debhelper should run at, +overriding any value specified via Build-Depends on debhelper-compat or via the +F<debian/compat> file. + +=item B<DH_NO_ACT> + +Set to B<1> to enable no-act mode. + +=item B<DH_OPTIONS> + +All debhelper tools will parse command line arguments listed in this variable +before any command option (as if they had been prepended to the command +line arguments). Unfortunately, some third-party provided tools may not +support this variable and will ignore these command line arguments. + +When using L<dh(1)>, it can be passed options that will be passed on to each +debhelper command, which is generally better than using DH_OPTIONS. + +=item B<DH_ALWAYS_EXCLUDE> + +If set, this adds the value the variable is set to to the B<-X> options of all +commands that support the B<-X> option. Moreover, B<dh_builddeb> will B<rm -rf> +anything that matches the value in your package build tree. + +This can be useful if you are doing a build from a CVS source tree, in +which case setting B<DH_ALWAYS_EXCLUDE=CVS> will prevent any CVS directories +from sneaking into the package you build. Or, if a package has a source +tarball that (unwisely) includes CVS directories, you might want to export +B<DH_ALWAYS_EXCLUDE=CVS> in F<debian/rules>, to make it take effect wherever +your package is built. + +Multiple things to exclude can be separated with colons, as in +B<DH_ALWAYS_EXCLUDE=CVS:.svn> + +=item B<DH_EXTRA_ADDONS> + +If set, this adds the specified dh addons to be run in the appropriate places +in the sequence of commands. This is equivalent to specifying the addon to run +with the --with flag in the debian/rules file. Any --without calls specifying +an addon in this environment variable will not be run. + +This is intended to be used by downstreams or specific local configurations +that require a debhelper addon to be run during multiple builds without +having to patch a large number of rules file. If at all possible, this should +be avoided in favor of a --with flag in the rules file. + +=item B<DH_COLORS>, B<DPKG_COLORS> + +These variables can be used to control whether debhelper commands should use +colors in their textual output. Can be set to "always", "auto" (the default), +or "never". + +Note that B<DPKG_COLOR> also affects a number of dpkg related tools and +debhelper uses it on the assumption that you want the same color setting for +dpkg and debhelper. In the off-hand chance you want different color setting +for debhelper, you can use B<DH_COLORS> instead or in addition to +B<DPKG_COLORS>. + +=item B<NO_COLOR> + +If no explicit request for color has been given (e.g. B<DH_COLORS> and +B<DPKG_COLORS> are both unset), the presence of this environment variable +cause the default color setting to be "never". + +The variable is defined according to L<https://no-color.org/>. In this +project, the environment variables (such as B<DH_COLORS>) are considered +an explicit request for color. + +=item B<CFLAGS>, B<CPPFLAGS>, B<CXXFLAGS>, B<OBJCFLAGS>, B<OBJCXXFLAGS>, B<GCJFLAGS>, B<FFLAGS>, B<FCFLAGS>, B<LDFLAGS> + +By default (in any non-deprecated compat level), debhelper will automatically +set these flags by using L<dpkg-buildflags(1)>, when they are unset. If you +need to change the default flags, please use the features from +L<dpkg-buildflags(1)> to do this (e.g. B<DEB_BUILD_MAINT_OPTIONS=hardening=all> +or B<DEB_CPPFLAGS_MAINT_APPEND=-DCUSTOM_MACRO=true>) rather than setting the +concrete variable directly. + +=item B<HOME>, B<XDG_*> + +In compat 13 and later, these environment variables are reset before invoking +the upstream build system via the B<dh_auto_*> helpers. The variables B<HOME> +(all B<dh_auto_*> helpers) and B<XDG_RUNTIME_DIR> (B<dh_auto_test> only) will +be set to a writable directory. All remaining variables and B<XDG_RUNTIME_DIR> +(except for during B<dh_auto_test>) will be cleared. + +The B<HOME> directory will be created as an empty directory but it will be +reused between calls to B<dh_auto_*>. Any content will persist until +explicitly deleted or B<dh_clean>. + +=item B<DEB_BUILD_OPTIONS> + +Please see L</Supported flags in DEB_BUILD_OPTIONS> for this environment +variable. + +Please note that this variable should I<not> be altered by package maintainers +inside F<debian/rules> to change the behaviour of debhelper. Instead, where +the package maintainer need these features, they should look disabling the +relevant feature directly (e.g. by overriding the concrete tools). + +=item B<DEB_BUILD_MAINT_OPTIONS> + +This is a dpkg specific environment variable (see e.g. L<dpkg-buildflags(1)>). +The debhelper tool suite silently ignores it. + +It is documented here because it has a similar name to B<DEB_BUILD_OPTIONS>, +which make some people mistakenly assume that debhelper will also react to this +variable. + +=back + +=head2 Supported flags in DEB_BUILD_OPTIONS + +The debhelper tool suite reacts to the following flags in B<DEB_BUILD_OPTIONS>. + +=over 4 + +=item B<dherroron=obsolete-compat-levels> + +I<This is a debhelper specific value.> + +When B<dherroron> is present and set to B<obsolete-compat-levels>, then +debhelper tools will promote deprecation warnings for usage of old soon +to be removed compat levels into errors. + +This is useful for automated checking for code relying on deprecated +compat levels that is scheduled for removal. + +This option is intended for testing purposes; not production builds. + +=item B<nostrip> + +I<This value will change the content of the debs being built. The .deb +packages built when this is set is therefore not bit-for-bit reproducible +with a regular build in the general case.> + +This value will cause the official debhelper tools will skip actions and +helpers that either remove, detach or deduplicate debugging symbols in +ELF binaries. + +This value affects L<dh_dwz(1)> and L<dh_strip(1)>. + +=item B<nocheck> + +This value will cause the official debhelper build systems to skip runs +of upstream test suites. + +Package maintainers looking to avoid running the upstream tests should +B<not> rely on this. Instead, they can add an empty override target +to skip B<dh_auto_test>. + +This value affects L<dh_auto_test(1)>. + +=item B<nodoc> + +I<This value will change the content of the debs being built. The .deb +packages built when this is set is therefore not bit-for-bit reproducible +with a regular build in the general case.> + +This value will cause several debhelper tools to skip installation of +documentation such as manpages or upstream provided documentation. +Additionally, the tools will also ignore if declared documentation is +"missing" on the assumption that the documentation has not been built. + +This value effects tools I<like> L<dh_installdocs(1)>, which I<knows> +it is working with documentation. + +=item B<notrimdch> + +I<This value will change the content of the debs being built. The .deb +packages built when this is set is therefore not bit-for-bit reproducible +with a regular build in the general case.> + +This value will cause L<dh_installchangelogs(1)> to act as if it +had been passed the B<--no-trim> option, forcing it to forgo removing +older entries from changelogs. + +=item B<noautodbgsym>, B<noddebs> + +I<The official name is noautodbgsym. The noddebs variant is accepted +for historical reasons.> + +This value causes debhelper to skip the generation of automatically +generated debug symbol packages. + +This value affects L<dh_strip(1)>. + +=item B<parallel=N> + +This value enables debhelper to use up to B<N> threads or processes +(subject to parameters like B<--no-parallel> and B<--max-parallel=M>). +Not all debhelper tools work with parallel tasks and may silently +ignore the request. + +This value affects many debhelper tools. Most notably B<dh_auto_*>, +which will attempt to run the underlying upstream build system with +that number of threads. + +=item B<terse> + +This value will cause the official debhelper build systems to configure +upstream builds to be terse (i.e. reduce verbosity in their output). +This is subject to the upstream and the debhelper build system +supporting such features. + +This value affects most B<dh_auto_*> tools directly. For commands +provided by the debhelper package, it also causes the tools to act like +the B<DH_QUIET> environment variable was non-empty. + +=back + +Unknown flags are silently ignored. + +Note third-party debhelper-like tools or third-party provided build systems +may or may not react to the above flags. This tends to depend on +implementation details of the tool. + +=head1 SEE ALSO + +=over 4 + +=item L<debhelper-compat-upgrade-checklist(7)> + +List of supported compat levels and an upgrade checklist for each of them. + +=item F</usr/share/doc/debhelper/examples/> + +A set of example F<debian/rules> files that use debhelper. + +=item L<http://joeyh.name/code/debhelper/> + +Debhelper web site. + +=back + +=head1 AUTHOR + +Joey Hess <joeyh@debian.org> + +=cut |