Adding upstream version 13.11.4.upstream/13.11.4upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

27 files changed, 7216 insertions, 0 deletions

diff --git a/lib/Debian/Debhelper/Buildsystem.pm b/lib/Debian/Debhelper/Buildsystem.pm
new file mode 100644
index 0000000..795f3d3
--- /dev/null
+++ b/lib/Debian/Debhelper/Buildsystem.pm
@@ -0,0 +1,605 @@
+# Defines debhelper build system class interface and implementation
+# of common functionality.
+#
+# Copyright: © 2008-2009 Modestas Vainius
+# License: GPL-2+
+
+package Debian::Debhelper::Buildsystem;
+
+use strict;
+use warnings;
+use Cwd ();
+use File::Spec;
+use Debian::Debhelper::Dh_Lib;
+
+# Build system name. Defaults to the last component of the class
+# name. Do not override this method unless you know what you are
+# doing.
+sub NAME {
+	my ($this) = @_;
+	my $class = ref($this);
+	my $target_name;
+	if ($class) {
+		# Do not assume that the target buildsystem has been provided.
+		# NAME could be called during an error in the constructor.
+		if ($this->IS_GENERATOR_BUILD_SYSTEM and $this->get_targetbuildsystem) {
+			$target_name = $this->get_targetbuildsystem->NAME;
+		}
+	} else {
+		$class = $this;
+	}
+	if ($class =~ m/^.+::([^:]+)$/) {
+		my $name = $1;
+		return "${name}+${target_name}" if defined($target_name);
+		return $name;
+	}
+	else {
+		error("Invalid build system class name: $class");
+	}
+}
+
+# Description of the build system to be shown to the users.
+sub DESCRIPTION {
+	error("class lacking a DESCRIPTION");
+}
+
+# Default build directory. Can be overridden in the derived
+# class if really needed.
+sub DEFAULT_BUILD_DIRECTORY {
+	"obj-" . dpkg_architecture_value("DEB_HOST_GNU_TYPE");
+}
+
+# Return 1 if the build system generator
+sub IS_GENERATOR_BUILD_SYSTEM {
+	return 0;
+}
+
+# Generator build-systems only
+# The name of the supported target systems.  The first one is
+# assumed to be the default if DEFAULT_TARGET_BUILD_SYSTEM is
+# not overridden.
+sub SUPPORTED_TARGET_BUILD_SYSTEMS {
+	error("class lacking SUPPORTED_TARGET_BUILD_SYSTEMS");
+}
+
+# Generator build-systems only
+# Name of default target build system if target is unspecified
+#  (e.g. --buildsystem=cmake instead of cmake+makefile).
+sub DEFAULT_TARGET_BUILD_SYSTEM {
+	my ($this) = @_;
+	my @targets = $this->SUPPORTED_TARGET_BUILD_SYSTEMS;
+	# Assume they are listed in order.
+	return $targets[0];
+}
+
+# For regular build systems, the same as DESCRIPTION
+# For generator based build systems, the DESCRIPTION of the generator build
+# system + the target build system.  Do not override this method unless you
+# know what you are doing.
+sub FULL_DESCRIPTION {
+	my ($this) = @_;
+	my $description = $this->DESCRIPTION;
+	return $description if not exists($this->{'targetbuildsystem'});
+	my $target_build_system = $this->{'targetbuildsystem'};
+	return $description if not defined($target_build_system);
+	my $target_desc = $target_build_system->FULL_DESCRIPTION;
+	return "${description} combined with ${target_desc}";
+}
+
+# Constructs a new build system object. Named parameters:
+# - sourcedir-     specifies source directory (relative to the current (top)
+#                  directory) where the sources to be built live. If not
+#                  specified or empty, defaults to the current directory.
+# - builddir -     specifies build directory to use. Path is relative to the
+#                  current (top) directory. If undef or empty,
+#                  DEFAULT_BUILD_DIRECTORY directory will be used.
+# - parallel -     max number of parallel processes to be spawned for building
+#                  sources (-1 = unlimited; 1 = no parallel)
+# - targetbuildsystem -     The target build system for generator based build
+#                           systems.  Only set for generator build systems.
+# Derived class can override the constructor to initialize common object
+# parameters. Do NOT use constructor to execute commands or otherwise
+# configure/setup build environment. There is absolutely no guarantee the
+# constructed object will be used to build something. Use pre_building_step(),
+# $build_step() or post_building_step() methods for this.
+sub new {
+	my ($class, %opts)=@_;
+
+	my $this = bless({ sourcedir => '.',
+	                   builddir => undef,
+	                   parallel => undef,
+	                   cwd => Cwd::getcwd() }, $class);
+
+	# Setup the target buildsystem early, so e.g. _set_builddir also
+	# applies to the target build system.  Useful if the generator
+	# and target does not agree on (e.g.) the default build dir.
+	my $target_bs_name;
+	if (exists $opts{targetbuildsystem}) {
+		$target_bs_name = $opts{targetbuildsystem};
+	}
+
+	$target_bs_name //= $this->DEFAULT_TARGET_BUILD_SYSTEM if $this->IS_GENERATOR_BUILD_SYSTEM;
+
+	if (defined($target_bs_name)) {
+		my %target_opts = %opts;
+		# Let the target know it is used as a target build system.
+		# E.g. the makefile has special cases based on whether it is
+		# the main or a target build system.
+		delete($target_opts{'targetbuildsystem'});
+		$target_opts{'_is_targetbuildsystem'} = 1;
+		my $target_system =_create_buildsystem_instance($target_bs_name, 1, %target_opts);
+		$this->set_targetbuildsystem($target_system);
+	}
+
+	$this->{'_is_targetbuildsystem'} = $opts{'_is_targetbuildsystem'}
+	  if exists($opts{'_is_targetbuildsystem'});
+
+	if (exists $opts{sourcedir}) {
+		# Get relative sourcedir abs_path (without symlinks)
+		my $abspath = Cwd::abs_path($opts{sourcedir});
+		if (! -d $abspath || $abspath !~ /^\Q$this->{cwd}\E/) {
+			error("invalid or non-existing path to the source directory: ".$opts{sourcedir});
+		}
+		$this->{sourcedir} = File::Spec->abs2rel($abspath, $this->{cwd});
+	}
+	if (exists $opts{builddir}) {
+		$this->_set_builddir($opts{builddir});
+	}
+	if (defined $opts{parallel}) {
+		$this->{parallel} = $opts{parallel};
+	}
+
+	return $this;
+}
+
+# Private method to set a build directory. If undef, use default.
+# Do $this->{builddir} = undef or pass $this->get_sourcedir() to
+# unset the build directory.
+sub _set_builddir {
+	my $this=shift;
+	my $builddir=shift || $this->DEFAULT_BUILD_DIRECTORY;
+
+	if (defined $builddir) {
+		$builddir = $this->canonpath($builddir); # Canonicalize
+
+		# Sanitize $builddir
+		if ($builddir =~ m#^\.\./#) {
+			# We can't handle those as relative. Make them absolute
+			$builddir = File::Spec->catdir($this->{cwd}, $builddir);
+		}
+		elsif ($builddir =~ /\Q$this->{cwd}\E/) {
+			$builddir = File::Spec->abs2rel($builddir, $this->{cwd});
+		}
+
+		# If build directory ends up the same as source directory, drop it
+		if ($builddir eq $this->get_sourcedir()) {
+			$builddir = undef;
+		}
+	}
+	$this->{builddir} = $builddir;
+	# Use get as guard because this method is (also) called from the
+	# constructor before the target build system is setup.
+	if ($this->get_targetbuildsystem) {
+		$this->get_targetbuildsystem->{builddir} = $builddir;
+	};
+	return $builddir;
+}
+
+sub set_targetbuildsystem {
+	my ($this, $target_system) = @_;
+	my $ok = 0;
+	my $target_bs_name = $target_system->NAME;
+	if (not $this->IS_GENERATOR_BUILD_SYSTEM) {
+		my $name = $this->NAME;
+		error("Cannot set a target build system: Buildsystem ${name} is not a generator build system");
+	}
+	for my $supported_bs_name ($this->SUPPORTED_TARGET_BUILD_SYSTEMS) {
+		if ($supported_bs_name eq $target_bs_name) {
+			$ok = 1;
+			last;
+		}
+	}
+	if (not $ok) {
+		my $name = $this->NAME;
+		error("Buildsystem ${name} does not support ${target_bs_name} as target build system.");
+	}
+	$this->{'targetbuildsystem'} = $target_system
+}
+
+sub _is_targetbuildsystem {
+	my ($this) = @_;
+	return 0 if not exists($this->{'_is_targetbuildsystem'});
+	return $this->{'_is_targetbuildsystem'};
+}
+
+# Returns the target build system if it is provided
+sub get_targetbuildsystem {
+	my $this = shift;
+	return if not exists($this->{'targetbuildsystem'});
+	return $this->{'targetbuildsystem'};
+}
+
+# This instance method is called to check if the build system is able
+# to build a source package. It will be called during the build
+# system auto-selection process, inside the root directory of the debian
+# source package. The current build step is passed as an argument.
+# Return 0 if the source is not buildable, or a positive integer
+# otherwise.
+#
+# Generally, it is enough to look for invariant unique build system
+# files shipped with clean source to determine if the source might
+# be buildable or not. However, if the build system is derived from
+# another other auto-buildable build system, this method
+# may also check if the source has already been built with this build
+# system partially by looking for temporary files or other common
+# results the build system produces during the build process. The
+# latter checks must be unique to the current build system and must
+# be very unlikely to be true for either its parent or other build
+# systems. If it is determined that the source has already built
+# partially with this build system, the value returned must be
+# greater than the one of the SUPER call.
+sub check_auto_buildable {
+	my $this=shift;
+	my ($step)=@_;
+	return 0;
+}
+
+# Derived class can call this method in its constructor
+# to enforce in source building even if the user requested otherwise.
+sub enforce_in_source_building {
+	my $this=shift;
+	if ($this->get_builddir()) {
+		$this->{warn_insource} = 1;
+		$this->{builddir} = undef;
+	}
+	if ($this->IS_GENERATOR_BUILD_SYSTEM) {
+		$this->get_targetbuildsystem->enforce_in_source_building(@_);
+		# Only warn in one build system.
+		delete($this->{warn_insource});
+	}
+}
+
+# Derived class can call this method in its constructor to *prefer*
+# out of source building. Unless build directory has already been
+# specified building will proceed in the DEFAULT_BUILD_DIRECTORY or
+# the one specified in the 'builddir' named parameter (which may
+# match the source directory). Typically you should pass @_ from
+# the constructor to this call.
+sub prefer_out_of_source_building {
+	my $this=shift;
+	my %args=@_;
+	if (!defined $this->get_builddir()) {
+		if (!$this->_set_builddir($args{builddir}) && !$args{builddir}) {
+			# If we are here, DEFAULT_BUILD_DIRECTORY matches
+			# the source directory, building might fail.
+			error("default build directory is the same as the source directory." .
+			      " Please specify a custom build directory");
+		}
+		if ($this->IS_GENERATOR_BUILD_SYSTEM) {
+			$this->get_targetbuildsystem->prefer_out_of_source_building(@_);
+		}
+	}
+}
+
+# Enhanced version of File::Spec::canonpath. It collapses ..
+# too so it may return invalid path if symlinks are involved.
+# On the other hand, it does not need for the path to exist.
+sub canonpath {
+	my ($this, $path)=@_;
+	my @canon;
+	my $back=0;
+	foreach my $comp (split(m%/+%, $path)) {
+		if ($comp eq '.') {
+			next;
+		}
+		elsif ($comp eq '..') {
+			if (@canon > 0) { pop @canon; }  else { $back++; }
+		}
+		else {
+			push @canon, $comp;
+		}
+	}
+	return (@canon + $back > 0) ? join('/', ('..')x$back, @canon) : '.';
+}
+
+# Given both $path and $base are relative to the $root, converts and
+# returns path of $path being relative to the $base. If either $path or
+# $base is absolute, returns another $path (converted to) absolute.
+sub _rel2rel {
+	my ($this, $path, $base, $root)=@_;
+	$root = $this->{cwd} unless defined $root;
+
+	if (File::Spec->file_name_is_absolute($path)) {
+		return $path;
+	}
+	elsif (File::Spec->file_name_is_absolute($base)) {
+		return File::Spec->rel2abs($path, $root);
+	}
+	else {
+		return File::Spec->abs2rel(
+			File::Spec->rel2abs($path, $root),
+			File::Spec->rel2abs($base, $root)
+		);
+	}
+}
+
+# Get path to the source directory
+# (relative to the current (top) directory)
+sub get_sourcedir {
+	my $this=shift;
+	return $this->{sourcedir};
+}
+
+# Convert path relative to the source directory to the path relative
+# to the current (top) directory.
+sub get_sourcepath {
+	my ($this, $path)=@_;
+	return File::Spec->catfile($this->get_sourcedir(), $path);
+}
+
+# Get path to the build directory if it was specified
+# (relative to the current (top) directory). undef if the same
+# as the source directory.
+sub get_builddir {
+	my $this=shift;
+	return $this->{builddir};
+}
+
+# Convert path that is relative to the build directory to the path
+# that is relative to the current (top) directory.
+# If $path is not specified, always returns build directory path
+# relative to the current (top) directory regardless if builddir was
+# specified or not.
+sub get_buildpath {
+	my ($this, $path)=@_;
+	my $builddir = $this->get_builddir() || $this->get_sourcedir();
+	if (defined $path) {
+		return File::Spec->catfile($builddir, $path);
+	}
+	return $builddir;
+}
+
+# When given a relative path to the source directory, converts it
+# to the path that is relative to the build directory. If $path is
+# not given, returns a path to the source directory that is relative
+# to the build directory.
+sub get_source_rel2builddir {
+	my $this=shift;
+	my $path=shift;
+
+	my $dir = '.';
+	if ($this->get_builddir()) {
+		$dir = $this->_rel2rel($this->get_sourcedir(), $this->get_builddir());
+	}
+	if (defined $path) {
+		return File::Spec->catfile($dir, $path);
+	}
+	return $dir;
+}
+
+sub get_parallel {
+	my $this=shift;
+	return $this->{parallel};
+}
+
+# This parallel support for the given step
+sub disable_parallel {
+	my ($this) = @_;
+	$this->{parallel} = 1;
+	if ($this->IS_GENERATOR_BUILD_SYSTEM) {
+		$this->get_targetbuildsystem->disable_parallel;
+	}
+}
+
+# When given a relative path to the build directory, converts it
+# to the path that is relative to the source directory. If $path is
+# not given, returns a path to the build directory that is relative
+# to the source directory.
+sub get_build_rel2sourcedir {
+	my $this=shift;
+	my $path=shift;
+
+	my $dir = '.';
+	if ($this->get_builddir()) {
+		$dir = $this->_rel2rel($this->get_builddir(), $this->get_sourcedir());
+	}
+	if (defined $path) {
+		return File::Spec->catfile($dir, $path);
+	}
+	return $dir;
+}
+
+# Creates a build directory.
+sub mkdir_builddir {
+	my $this=shift;
+	if ($this->get_builddir()) {
+		mkdirs($this->get_builddir());
+	}
+}
+
+sub check_auto_buildable_clean_oos_buildir {
+	my $this = shift;
+	my ($step) = @_;
+	# This only applies to clean
+	return 0 if $step ne 'clean';
+	my $builddir = $this->get_builddir;
+	# If there is no builddir, then this rule does not apply.
+	return 0 if not defined($builddir) or not -d $builddir;
+	return 1;
+}
+
+sub _generic_doit_in_dir {
+	my ($this, $dir, $sub, @args) = @_;
+	my %args;
+	if (ref($args[0])) {
+		%args = %{shift(@args)};
+	}
+	$args{chdir} = $dir;
+	return $sub->(\%args, @args);
+}
+
+# Changes working directory to the source directory (if needed),
+# calls print_and_doit(@_) and changes working directory back to the
+# top directory.
+sub doit_in_sourcedir {
+	my ($this, @args) = @_;
+	$this->_generic_doit_in_dir($this->get_sourcedir, \&print_and_doit, @args);
+	return 1;
+}
+
+# Changes working directory to the source directory (if needed),
+# calls print_and_doit(@_) and changes working directory back to the
+# top directory. Errors are ignored.
+sub doit_in_sourcedir_noerror {
+	my ($this, @args) = @_;
+	return $this->_generic_doit_in_dir($this->get_sourcedir, \&print_and_doit_noerror, @args);
+}
+
+# Changes working directory to the build directory (if needed),
+# calls print_and_doit(@_) and changes working directory back to the
+# top directory.
+sub doit_in_builddir {
+	my ($this, @args) = @_;
+	$this->_generic_doit_in_dir($this->get_buildpath, \&print_and_doit, @args);
+	return 1;
+}
+
+# Changes working directory to the build directory (if needed),
+# calls print_and_doit(@_) and changes working directory back to the
+# top directory. Errors are ignored.
+sub doit_in_builddir_noerror {
+	my ($this, @args) = @_;
+	return $this->_generic_doit_in_dir($this->get_buildpath, \&print_and_doit_noerror, @args);
+}
+
+# In case of out of source tree building, whole build directory
+# gets wiped (if it exists) and 1 is returned. If build directory
+# had 2 or more levels, empty parent directories are also deleted.
+# If build directory does not exist, nothing is done and 0 is returned.
+sub rmdir_builddir {
+	my $this=shift;
+	my $only_empty=shift;
+	if ($this->get_builddir()) {
+		my $buildpath = $this->get_buildpath();
+		if (-d $buildpath) {
+			my @dir = File::Spec->splitdir($this->get_build_rel2sourcedir());
+			my $peek;
+			if (not $only_empty) {
+				doit("rm", "-rf", $buildpath);
+				pop @dir;
+			}
+			# If build directory is relative and had 2 or more levels, delete
+			# empty parent directories until the source or top directory level.
+			if (not File::Spec->file_name_is_absolute($buildpath)) {
+				while (($peek=pop @dir) && $peek ne '.' && $peek ne '..') {
+					my $dir = $this->get_sourcepath(File::Spec->catdir(@dir, $peek));
+					doit("rmdir", "--ignore-fail-on-non-empty", $dir);
+					last if -d $dir;
+				}
+			}
+		}
+		return 1;
+	}
+	return 0;
+}
+
+# Instance method that is called before performing any step (see below).
+# Action name is passed as an argument. Derived classes overriding this
+# method should also call SUPER implementation of it.
+sub pre_building_step {
+	my $this=shift;
+	my ($step)=@_;
+
+	# Warn if in source building was enforced but build directory was
+	# specified. See enforce_in_source_building().
+	if ($this->{warn_insource}) {
+		warning("warning: " . $this->NAME() .
+		    " does not support building out of source tree. In source building enforced.");
+		delete $this->{warn_insource};
+	}
+	if ($this->IS_GENERATOR_BUILD_SYSTEM) {
+		$this->get_targetbuildsystem->pre_building_step(@_);
+	}
+}
+
+# Instance method that is called after performing any step (see below).
+# Action name is passed as an argument. Derived classes overriding this
+# method should also call SUPER implementation of it.
+sub post_building_step {
+	my $this=shift;
+	my ($step)=@_;
+	if ($this->IS_GENERATOR_BUILD_SYSTEM) {
+		$this->get_targetbuildsystem->post_building_step(@_);
+	}
+}
+
+# The instance methods below provide support for configuring,
+# building, testing, install and cleaning source packages.
+# In case of failure, the method may just error() out.
+#
+# These methods should be overridden by derived classes to
+# implement build system specific steps needed to build the
+# source. Arbitrary number of custom step arguments might be
+# passed. Default implementations do nothing.
+#
+# Note: For generator build systems, the default is to
+# delegate the step to the target build system for all
+# steps except configure.
+sub configure {
+	my $this=shift;
+}
+
+sub build {
+	my $this=shift;
+	if ($this->IS_GENERATOR_BUILD_SYSTEM) {
+		$this->get_targetbuildsystem->build(@_);
+	}
+}
+
+sub test {
+	my $this=shift;
+	if ($this->IS_GENERATOR_BUILD_SYSTEM) {
+		$this->get_targetbuildsystem->test(@_);
+	}
+}
+
+# destdir parameter specifies where to install files.
+sub install {
+	my $this=shift;
+	my ($destdir) = @_;
+
+	if ($this->IS_GENERATOR_BUILD_SYSTEM) {
+		$this->get_targetbuildsystem->install(@_);
+	}
+}
+
+sub clean {
+	my $this=shift;
+
+	if ($this->IS_GENERATOR_BUILD_SYSTEM) {
+		$this->get_targetbuildsystem->clean(@_);
+	}
+}
+
+
+sub _create_buildsystem_instance {
+	my ($full_name, $required, %bsopts) = @_;
+	my @parts = split(m{[+]}, $full_name, 2);
+	my $name = $parts[0];
+	my $module = "Debian::Debhelper::Buildsystem::$name";
+	if (@parts > 1) {
+		if (exists($bsopts{'targetbuildsystem'})) {
+			error("Conflicting target buildsystem for ${name} (load as ${full_name}, but target configured in bsopts)");
+		}
+		$bsopts{'targetbuildsystem'} = $parts[1];
+	}
+
+	eval "use $module";
+	if ($@) {
+		return if not $required;
+		error("unable to load build system class '$name': $@");
+	}
+	return $module->new(%bsopts);
+}
+
+1
diff --git a/lib/Debian/Debhelper/Buildsystem/ant.pm b/lib/Debian/Debhelper/Buildsystem/ant.pm
new file mode 100644
index 0000000..49aaf1e
--- /dev/null
+++ b/lib/Debian/Debhelper/Buildsystem/ant.pm
@@ -0,0 +1,52 @@
+# A debhelper build system class for handling Ant based projects.
+#
+# Copyright: © 2009 Joey Hess
+# License: GPL-2+
+
+package Debian::Debhelper::Buildsystem::ant;
+
+use strict;
+use warnings;
+use parent qw(Debian::Debhelper::Buildsystem);
+
+sub DESCRIPTION {
+	"Ant (build.xml)"
+}
+
+sub check_auto_buildable {
+	my $this=shift;
+	return (-e $this->get_sourcepath("build.xml")) ? 1 : 0;
+}
+
+sub new {
+	my $class=shift;
+	my $this=$class->SUPER::new(@_);
+	$this->enforce_in_source_building();
+	return $this;
+}
+
+sub build {
+	my $this=shift;
+	my $d_ant_prop = $this->get_sourcepath('debian/ant.properties');
+	my @args;
+	if ( -f $d_ant_prop ) {
+		push(@args, '-propertyfile', $d_ant_prop);
+	}
+
+	# Set the username to improve the reproducibility
+	push(@args, "-Duser.name", "debian");
+
+	$this->doit_in_sourcedir("ant", @args, @_);
+}
+
+sub clean {
+	my $this=shift;
+	my $d_ant_prop = $this->get_sourcepath('debian/ant.properties');
+	my @args;
+	if ( -f $d_ant_prop ) {
+		push(@args, '-propertyfile', $d_ant_prop);
+	}
+	$this->doit_in_sourcedir("ant", @args, "clean", @_);
+}
+
+1
diff --git a/lib/Debian/Debhelper/Buildsystem/autoconf.pm b/lib/Debian/Debhelper/Buildsystem/autoconf.pm
new file mode 100644
index 0000000..8752ea1
--- /dev/null
+++ b/lib/Debian/Debhelper/Buildsystem/autoconf.pm
@@ -0,0 +1,98 @@
+# A debhelper build system class for handling Autoconf based projects
+#
+# Copyright: © 2008 Joey Hess
+#            © 2008-2009 Modestas Vainius
+# License: GPL-2+
+
+package Debian::Debhelper::Buildsystem::autoconf;
+
+use strict;
+use warnings;
+use Debian::Debhelper::Dh_Lib qw(%dh dpkg_architecture_value get_buildoption sourcepackage compat);
+use parent qw(Debian::Debhelper::Buildsystem::makefile);
+
+sub DESCRIPTION {
+	"GNU Autoconf (configure)"
+}
+
+sub check_auto_buildable {
+	my $this=shift;
+	my ($step)=@_;
+
+	return 0 unless -f $this->get_sourcepath("configure") &&
+		-x _;
+
+	# Handle configure explicitly; inherit the rest
+	return 1 if $step eq "configure";
+	return $this->SUPER::check_auto_buildable(@_);
+}
+
+sub configure {
+	my $this=shift;
+
+	# Standard set of options for configure.
+	my @opts;
+	push @opts, "--build=" . dpkg_architecture_value("DEB_BUILD_GNU_TYPE");
+	push @opts, "--prefix=/usr";
+	push @opts, "--includedir=\${prefix}/include";
+	push @opts, "--mandir=\${prefix}/share/man";
+	push @opts, "--infodir=\${prefix}/share/info";
+	push @opts, "--sysconfdir=/etc";
+	push @opts, "--localstatedir=/var";
+	# We pass --disable/enable-* options that might be unknown, so we
+	# should not emit warnings.
+	push @opts, "--disable-option-checking";
+	if ($dh{QUIET}) {
+		push @opts, "--enable-silent-rules";
+	} else {
+		push @opts, "--disable-silent-rules";
+	}
+	my $multiarch=dpkg_architecture_value("DEB_HOST_MULTIARCH");
+	if (! compat(8)) {
+		if (defined $multiarch) {
+			push @opts, "--libdir=\${prefix}/lib/$multiarch";
+			push(@opts, "--libexecdir=\${prefix}/lib/$multiarch") if compat(11);
+		}
+		else {
+			push(@opts, "--libexecdir=\${prefix}/lib") if compat(11);
+		}
+	}
+	else {
+		push @opts, "--libexecdir=\${prefix}/lib/" . sourcepackage();
+	}
+	push @opts, "--runstatedir=/run" if not compat(10);
+	push @opts, "--disable-maintainer-mode";
+	push @opts, "--disable-dependency-tracking";
+	# Provide --host only if different from --build, as recommended in
+	# autotools-dev README.Debian: When provided (even if equal)
+	# autoconf 2.52+ switches to cross-compiling mode.
+	if (dpkg_architecture_value("DEB_BUILD_GNU_TYPE")
+	    ne dpkg_architecture_value("DEB_HOST_GNU_TYPE")) {
+		push @opts, "--host=" . dpkg_architecture_value("DEB_HOST_GNU_TYPE");
+	}
+
+	$this->mkdir_builddir();
+	eval {
+		$this->doit_in_builddir($this->get_source_rel2builddir("configure"), @opts, @_);
+	};
+	if ($@) {
+		if (-e $this->get_buildpath("config.log")) {
+			$this->doit_in_builddir('tail', '-v', '-n', '+0', 'config.log');
+		}
+		die $@;
+	}
+}
+
+sub test {
+	my $this=shift;
+
+	my $parallel = $this->get_parallel();
+	my @autotest;
+	push @autotest, "-j$parallel";
+	push @autotest, "--verbose" if not get_buildoption("terse");
+	$this->make_first_existing_target(['test', 'check'],
+		"TESTSUITEFLAGS=@autotest",
+		"VERBOSE=1", @_);
+}
+
+1
diff --git a/lib/Debian/Debhelper/Buildsystem/cmake.pm b/lib/Debian/Debhelper/Buildsystem/cmake.pm
new file mode 100644
index 0000000..c4a2ad9
--- /dev/null
+++ b/lib/Debian/Debhelper/Buildsystem/cmake.pm
@@ -0,0 +1,202 @@
+# A debhelper build system class for handling CMake based projects.
+# It prefers out of source tree building.
+#
+# Copyright: © 2008-2009 Modestas Vainius
+# License: GPL-2+
+
+package Debian::Debhelper::Buildsystem::cmake;
+
+use strict;
+use warnings;
+use Debian::Debhelper::Dh_Lib qw(%dh compat dpkg_architecture_value error is_cross_compiling get_buildoption print_and_doit);
+use parent qw(Debian::Debhelper::Buildsystem);
+
+my @STANDARD_CMAKE_FLAGS = qw(
+  -DCMAKE_INSTALL_PREFIX=/usr
+  -DCMAKE_BUILD_TYPE=None
+  -DCMAKE_INSTALL_SYSCONFDIR=/etc
+  -DCMAKE_INSTALL_LOCALSTATEDIR=/var
+  -DCMAKE_EXPORT_NO_PACKAGE_REGISTRY=ON
+  -DCMAKE_FIND_USE_PACKAGE_REGISTRY=OFF
+  -DCMAKE_FIND_PACKAGE_NO_PACKAGE_REGISTRY=ON
+  -DFETCHCONTENT_FULLY_DISCONNECTED=ON
+);
+
+my %DEB_HOST2CMAKE_SYSTEM = (
+	'linux'    => 'Linux',
+	'kfreebsd' => 'kFreeBSD',
+	'hurd'     => 'GNU',
+);
+
+my %GNU_CPU2SYSTEM_PROCESSOR = (
+	'arm'         => 'armv7l',
+	'mips64el'    => 'mips64',
+	'powerpc64le' => 'ppc64le',
+);
+
+my %TARGET_BUILD_SYSTEM2CMAKE_GENERATOR = (
+	'makefile' => 'Unix Makefiles',
+	'ninja'    => 'Ninja',
+);
+
+sub DESCRIPTION {
+	"CMake (CMakeLists.txt)"
+}
+
+sub IS_GENERATOR_BUILD_SYSTEM {
+	return 1;
+}
+
+sub SUPPORTED_TARGET_BUILD_SYSTEMS {
+	return qw(makefile ninja);
+}
+
+sub check_auto_buildable {
+	my $this=shift;
+	my ($step)=@_;
+	if (-e $this->get_sourcepath("CMakeLists.txt")) {
+		my $ret = ($step eq "configure" && 1) ||
+		          $this->get_targetbuildsystem->check_auto_buildable(@_);
+		if ($this->check_auto_buildable_clean_oos_buildir(@_)) {
+			# Assume that the package can be cleaned (i.e. the build directory can
+			# be removed) as long as it is built out-of-source tree and can be
+			# configured.
+			$ret++ if not $ret;
+		}
+		# Existence of CMakeCache.txt indicates cmake has already
+		# been used by a prior build step, so should be used
+		# instead of the parent makefile class.
+		$ret++ if ($ret && -e $this->get_buildpath("CMakeCache.txt"));
+		return $ret;
+	}
+	return 0;
+}
+
+sub new {
+	my $class=shift;
+	my $this=$class->SUPER::new(@_);
+	$this->prefer_out_of_source_building(@_);
+	return $this;
+}
+
+sub configure {
+	my $this=shift;
+	# Standard set of cmake flags
+	my @flags = @STANDARD_CMAKE_FLAGS;
+	my $backend = $this->get_targetbuildsystem->NAME;
+
+	push(@flags, '-DCMAKE_INSTALL_RUNSTATEDIR=/run') if not compat(10);
+	# Speed up installation phase a bit.
+	push(@flags, "-DCMAKE_SKIP_INSTALL_ALL_DEPENDENCY=ON") if not compat(12);
+	# Reproducibility #962474 / #1004939
+	push(@flags, '-DCMAKE_BUILD_RPATH_USE_ORIGIN=ON') if not compat(13);
+	if (exists($TARGET_BUILD_SYSTEM2CMAKE_GENERATOR{$backend})) {
+		my $generator = $TARGET_BUILD_SYSTEM2CMAKE_GENERATOR{$backend};
+		push(@flags, "-G${generator}");
+	}
+	if (not $dh{QUIET}) {
+		push(@flags, "-DCMAKE_VERBOSE_MAKEFILE=ON");
+	}
+
+	if ($ENV{CC}) {
+		push @flags, "-DCMAKE_C_COMPILER=" . $ENV{CC};
+	}
+	if ($ENV{CXX}) {
+		push @flags, "-DCMAKE_CXX_COMPILER=" . $ENV{CXX};
+	}
+	if (is_cross_compiling()) {
+		my $deb_host = dpkg_architecture_value("DEB_HOST_ARCH_OS");
+		if (my $cmake_system = $DEB_HOST2CMAKE_SYSTEM{$deb_host}) {
+			push(@flags, "-DCMAKE_SYSTEM_NAME=${cmake_system}");
+		} else {
+			error("Cannot cross-compile - CMAKE_SYSTEM_NAME not known for ${deb_host}");
+		}
+		my $gnu_cpu = dpkg_architecture_value("DEB_HOST_GNU_CPU");
+		if (exists($GNU_CPU2SYSTEM_PROCESSOR{$gnu_cpu})) {
+			push @flags, "-DCMAKE_SYSTEM_PROCESSOR=" . $GNU_CPU2SYSTEM_PROCESSOR{$gnu_cpu};
+		} else {
+			push @flags, "-DCMAKE_SYSTEM_PROCESSOR=${gnu_cpu}";
+		}
+		if (not $ENV{CC}) {
+			push @flags, "-DCMAKE_C_COMPILER=" . dpkg_architecture_value("DEB_HOST_GNU_TYPE") . "-gcc";
+		}
+		if (not $ENV{CXX}) {
+			push @flags, "-DCMAKE_CXX_COMPILER=" . dpkg_architecture_value("DEB_HOST_GNU_TYPE") . "-g++";
+		}
+		push(@flags, "-DPKG_CONFIG_EXECUTABLE=/usr/bin/" . dpkg_architecture_value("DEB_HOST_GNU_TYPE") . "-pkg-config");
+		push(@flags, "-DPKGCONFIG_EXECUTABLE=/usr/bin/" . dpkg_architecture_value("DEB_HOST_GNU_TYPE") . "-pkg-config");
+		push(@flags, "-DQMAKE_EXECUTABLE=/usr/bin/" . dpkg_architecture_value("DEB_HOST_GNU_TYPE") . "-qmake");
+	}
+	push(@flags, "-DCMAKE_INSTALL_LIBDIR=lib/" . dpkg_architecture_value("DEB_HOST_MULTIARCH"));
+
+	# CMake doesn't respect CPPFLAGS, see #653916.
+	if ($ENV{CPPFLAGS} && ! compat(8)) {
+		$ENV{CFLAGS}   .= ' ' . $ENV{CPPFLAGS};
+		$ENV{CXXFLAGS} .= ' ' . $ENV{CPPFLAGS};
+	}
+
+	$this->mkdir_builddir();
+	eval { 
+		$this->doit_in_builddir("cmake", @flags, @_, $this->get_source_rel2builddir());
+	};
+	if (my $err = $@) {
+		if (-e $this->get_buildpath("CMakeCache.txt")) {
+			$this->doit_in_builddir('tail', '-v', '-n', '+0', 'CMakeCache.txt');
+		}
+		if (-e $this->get_buildpath('CMakeFiles/CMakeOutput.log')) {
+			$this->doit_in_builddir('tail', '-v', '-n', '+0', 'CMakeFiles/CMakeOutput.log');
+		}
+		if (-e $this->get_buildpath('CMakeFiles/CMakeError.log')) {
+			$this->doit_in_builddir('tail', '-v', '-n', '+0', 'CMakeFiles/CMakeError.log');
+		}
+		die $err;
+	}
+}
+
+sub build {
+	my $this=shift;
+	my $target = $this->get_targetbuildsystem;
+	if ($target->NAME eq 'makefile') {
+		# Add VERBOSE=1 for #973029 when not asked to be quiet/terse.
+		push(@_, "VERBOSE=1") if not $dh{QUIET};
+	}
+	return $this->SUPER::build(@_);
+}
+
+sub test {
+	my $this=shift;
+	my $target = $this->get_targetbuildsystem;
+	$ENV{CTEST_OUTPUT_ON_FAILURE} = 1;
+	if ($target->NAME eq 'makefile') {
+		# Unlike make, CTest does not have "unlimited parallel" setting (-j implies
+		# -j1). So in order to simulate unlimited parallel, allow to fork a huge
+		# number of threads instead.
+		my $parallel = ($this->get_parallel() > 0) ? $this->get_parallel() : 999;
+		unshift(@_, "ARGS+=-j$parallel");
+		unshift(@_, "ARGS+=--verbose") if not get_buildoption("terse");
+	}
+	return $this->SUPER::test(@_);
+}
+
+sub install {
+	my $this = shift;
+	my $target = $this->get_targetbuildsystem;
+
+	if (compat(13)) {
+		$target->install(@_);
+	} else {
+		# In compat 14 `cmake --install` is preferred to `make install`,
+		# see https://bugs.debian.org/1020732
+		my $destdir = shift;
+		my %options = (
+			update_env => {
+				'LC_ALL'  => 'C.UTF-8',
+				'DESTDIR' => $destdir,
+			}
+		);
+		print_and_doit(\%options, 'cmake', '--install', $this->get_buildpath, @_);
+	}
+	return 1;
+}
+
+1
diff --git a/lib/Debian/Debhelper/Buildsystem/makefile.pm b/lib/Debian/Debhelper/Buildsystem/makefile.pm
new file mode 100644
index 0000000..856a6dd
--- /dev/null
+++ b/lib/Debian/Debhelper/Buildsystem/makefile.pm
@@ -0,0 +1,204 @@
+# A debhelper build system class for handling simple Makefile based projects.
+#
+# Copyright: © 2008 Joey Hess
+#            © 2008-2009 Modestas Vainius
+# License: GPL-2+
+
+package Debian::Debhelper::Buildsystem::makefile;
+
+use strict;
+use warnings;
+use Debian::Debhelper::Dh_Lib qw(dpkg_architecture_value escape_shell clean_jobserver_makeflags is_cross_compiling compat
+	should_use_root gain_root_cmd error);
+use parent qw(Debian::Debhelper::Buildsystem);
+
+my %DEB_DEFAULT_TOOLS = (
+	'CC'		=> 'gcc',
+	'CXX'		=> 'g++',
+	'PKG_CONFIG'	=> 'pkg-config',
+);
+
+# make makes things difficult by not providing a simple way to test
+# whether a Makefile target exists. Using -n and checking for a nonzero
+# exit status is not good enough, because even with -n, make will
+# run commands needed to eg, generate include files -- and those commands
+# could fail even though the target exists -- and we should let the target
+# run and propagate any failure.
+#
+# Using -n and checking for at least one line of output is better.
+# That will indicate make either wants to run one command, or
+# has output a "nothing to be done" message if the target exists but is a
+# noop.
+#
+# However, that heuristic is also not good enough, because a Makefile
+# could run code that outputs something, even though the -n is asking
+# it not to run anything. (Again, done for includes.) To detect this false
+# positive, there is unfortunately only one approach left: To
+# look for the error message printed by make when a target does not exist.
+#
+# This could break if make's output changes. It would only break a minority
+# of packages where this latter test is needed. The best way to avoid that
+# problem would be to fix make to have this simple and highly useful
+# missing feature.
+#
+# A final option would be to use -p and parse the output data base.
+# It's more practical for dh to use that method, since it operates on
+# only special debian/rules files, and not arbitrary Makefiles which
+# can be arbitrarily complicated, use implicit targets, and so on.
+sub exists_make_target {
+	my $this=shift;
+	my $target=shift;
+
+	my @opts=("-s", "-n", "--no-print-directory");
+	my $buildpath = $this->get_buildpath();
+	unshift @opts, "-C", $buildpath if $buildpath ne ".";
+
+	my $pid = open(MAKE, "-|");
+	defined($pid) || error("fork failed: $!");
+	if (! $pid) {
+		open(STDERR, ">&STDOUT");
+		$ENV{LC_ALL}='C';
+		exec($this->{makecmd}, @opts, $target, @_);
+		exit(1);
+	}
+
+	local $/=undef;
+	my $output=<MAKE>;
+	chomp $output;
+	close MAKE;
+
+	return defined $output
+		&& length $output
+		&& $output !~ /\*\*\* No rule to make target (`|')\Q$target\E'/;
+}
+
+sub do_make {
+	my $this=shift;
+
+	# Avoid possible warnings about unavailable jobserver,
+	# and force make to start a new jobserver.
+	clean_jobserver_makeflags();
+
+	# Note that this will override any -j settings in MAKEFLAGS.
+	my $parallel = $this->get_parallel();
+	if ($parallel == 0 or $parallel > 1) {
+		# We have to use the empty string for "unlimited"
+		$parallel = '' if $parallel == 0;
+		unshift(@_, "-j${parallel}");
+	} else {
+		unshift(@_, '-j1');
+	}
+
+	my @root_cmd;
+	if (exists($this->{_run_make_as_root}) and $this->{_run_make_as_root}) {
+		@root_cmd = gain_root_cmd();
+	}
+	$this->doit_in_builddir(@root_cmd, $this->{makecmd}, @_);
+}
+
+sub make_first_existing_target {
+	my $this=shift;
+	my $targets=shift;
+
+	foreach my $target (@$targets) {
+		if ($this->exists_make_target($target, @_)) {
+			$this->do_make($target, @_);
+			return $target;
+		}
+	}
+	return undef;
+}
+
+sub DESCRIPTION {
+	"simple Makefile"
+}
+
+sub new {
+	my $class=shift;
+	my $this=$class->SUPER::new(@_);
+	$this->{makecmd} = (exists $ENV{MAKE}) ? $ENV{MAKE} : "make";
+	return $this;
+}
+
+sub check_auto_buildable {
+	my $this=shift;
+	my ($step) = @_;
+
+	if (-e $this->get_buildpath("Makefile") ||
+	    -e $this->get_buildpath("makefile") ||
+	    -e $this->get_buildpath("GNUmakefile"))
+	{
+		# This is always called in the source directory, but generally
+		# Makefiles are created (or live) in the build directory.
+		return 1;
+	} elsif ($this->check_auto_buildable_clean_oos_buildir(@_)
+			 and $this->check_auto_buildable('configure')) {
+		# Assume that the package can be cleaned (i.e. the build directory can
+		# be removed) as long as it is built out-of-source tree and can be
+		# configured. This is useful for derivative buildsystems which
+		# generate Makefiles.
+		return 1;
+	}
+	return 0;
+}
+
+sub _should_inject_cross_build_tools {
+	my ($this) = @_;
+	return ref($this) eq 'Debian::Debhelper::Buildsystem::makefile';
+}
+
+
+sub build {
+	my $this=shift;
+	if (not $this->_is_targetbuildsystem
+			and is_cross_compiling()
+			and $this->_should_inject_cross_build_tools) {
+		# Only inject build tools variables during cross-compile when
+		# makefile is the explicit *main* build system.
+		for my $var (sort(keys(%DEB_DEFAULT_TOOLS))) {
+			my $tool = $DEB_DEFAULT_TOOLS{$var};
+			if ($ENV{$var}) {
+				unshift @_, $var . "=" . $ENV{$var};
+			} else {
+				unshift @_, $var . "=" . dpkg_architecture_value("DEB_HOST_GNU_TYPE") . "-" . $tool;
+			}
+		}
+	}
+	if (ref($this) eq 'Debian::Debhelper::Buildsystem::makefile' and not compat(10)) {
+		unshift @_, "INSTALL=install --strip-program=true";
+	}
+	$this->do_make(@_);
+}
+
+sub test {
+	my $this=shift;
+	$this->make_first_existing_target(['test', 'check'], @_);
+}
+
+sub install {
+	my $this=shift;
+	my $destdir=shift;
+	if (ref($this) eq 'Debian::Debhelper::Buildsystem::makefile' and not compat(10)) {
+		unshift @_, "INSTALL=install --strip-program=true";
+	}
+	if ( -f $this->get_buildpath('libtool')) {
+		$this->disable_parallel();
+	}
+
+	if (should_use_root('debhelper/upstream-make-install') and $< != 0) {
+		$this->{_run_make_as_root} = 1;
+	}
+
+	$this->make_first_existing_target(['install'],
+		"DESTDIR=$destdir",
+		"AM_UPDATE_INFO_DIR=no", @_);
+}
+
+sub clean {
+	my $this=shift;
+	if (!$this->rmdir_builddir()) {
+		$this->make_first_existing_target(['distclean', 'realclean', 'clean'], @_);
+	}
+}
+
+1
diff --git a/lib/Debian/Debhelper/Buildsystem/meson.pm b/lib/Debian/Debhelper/Buildsystem/meson.pm
new file mode 100644
index 0000000..3cd447d
--- /dev/null
+++ b/lib/Debian/Debhelper/Buildsystem/meson.pm
@@ -0,0 +1,158 @@
+# A debhelper build system class for handling Meson based projects.
+#
+# Copyright: © 2017 Michael Biebl
+# License: GPL-2+
+
+package Debian::Debhelper::Buildsystem::meson;
+
+use strict;
+use warnings;
+use Debian::Debhelper::Dh_Lib qw(compat dpkg_architecture_value is_cross_compiling doit warning error generated_file);
+use parent qw(Debian::Debhelper::Buildsystem);
+
+sub DESCRIPTION {
+	"Meson (meson.build)"
+}
+
+sub IS_GENERATOR_BUILD_SYSTEM {
+	return 1;
+}
+
+sub SUPPORTED_TARGET_BUILD_SYSTEMS {
+	return qw(ninja);
+}
+
+
+sub check_auto_buildable {
+	my $this=shift;
+	my ($step)=@_;
+
+	return 0 unless -e $this->get_sourcepath("meson.build");
+
+	# Handle configure explicitly; inherit the rest
+	return 1 if $step eq "configure";
+	my $ret = $this->get_targetbuildsystem->check_auto_buildable(@_);
+	if ($ret == 0 and $this->check_auto_buildable_clean_oos_buildir(@_)) {
+		# Assume that the package can be cleaned (i.e. the build directory can
+		# be removed) as long as it is built out-of-source tree and can be
+		# configured.
+		$ret++;
+	}
+	return $ret;
+}
+
+sub new {
+	my $class=shift;
+	my $this=$class->SUPER::new(@_);
+	$this->prefer_out_of_source_building(@_);
+	return $this;
+}
+
+sub configure {
+	my $this=shift;
+
+	# Standard set of options for meson.
+	my @opts = (
+		'--wrap-mode=nodownload',
+	);
+	push @opts, "--buildtype=plain";
+	push @opts, "--prefix=/usr";
+	push @opts, "--sysconfdir=/etc";
+	push @opts, "--localstatedir=/var";
+	my $multiarch=dpkg_architecture_value("DEB_HOST_MULTIARCH");
+	push @opts, "--libdir=lib/$multiarch";
+	push(@opts, "--libexecdir=lib/$multiarch") if compat(11);
+
+	if (is_cross_compiling()) {
+		# http://mesonbuild.com/Cross-compilation.html
+		my $cross_file = $ENV{'DH_MESON_CROSS_FILE'};
+		if (not $cross_file) {
+			my $debcrossgen = '/usr/share/meson/debcrossgen';
+			if (not -x $debcrossgen) {
+				warning("Missing debcrossgen (${debcrossgen}) cannot generate a meson cross file and non was provided");
+				error("Cannot cross-compile: Please use meson (>= 0.42.1) or provide a cross file via DH_MESON_CROSS_FILE");
+			}
+			my $filename = generated_file('_source', 'meson-cross-file.conf');
+			my %options = (
+				stdout => '/dev/null',
+				update_env => { LC_ALL => 'C.UTF-8'},
+			);
+			doit(\%options, $debcrossgen, "-o${filename}");
+			$cross_file = $filename;
+		}
+		if ($cross_file !~ m{^/}) {
+			# Make the file name absolute as meson will be called from the build dir.
+			require Cwd;
+			$cross_file =~ s{^\./}{};
+			$cross_file = Cwd::getcwd() . "/${cross_file}";
+		}
+		push(@opts, '--cross-file', $cross_file);
+	}
+
+	$this->mkdir_builddir();
+	eval {
+		my %options = (
+			update_env => { LC_ALL => 'C.UTF-8'},
+		);
+		$this->doit_in_builddir(\%options, "meson", "setup", $this->get_source_rel2builddir(), @opts, @_);
+	};
+	if ($@) {
+		if (-e $this->get_buildpath("meson-logs/meson-log.txt")) {
+			$this->doit_in_builddir('tail', '-v', '-n', '+0', 'meson-logs/meson-log.txt');
+		}
+		die $@;
+	}
+}
+
+sub test {
+	my $this = shift;
+	my $target = $this->get_targetbuildsystem;
+
+	eval {
+		if (compat(12) or $target->NAME ne 'ninja') {
+			$target->test(@_);
+		} else {
+			# In compat 13 with meson+ninja, we prefer using "meson test"
+			# over "ninja test"
+			my %options = (
+				update_env => {
+					'LC_ALL' => 'C.UTF-8',
+				}
+			);
+			if ($this->get_parallel() > 0) {
+				$options{update_env}{MESON_TESTTHREADS} = $this->get_parallel();
+			}
+			$this->doit_in_builddir(\%options, 'meson', 'test', @_);
+		}
+	};
+	if (my $err = $@) {
+		if (-e $this->get_buildpath("meson-logs/testlog.txt")) {
+			$this->doit_in_builddir('tail', '-v', '-n', '+0', 'meson-logs/testlog.txt');
+		}
+		die $err;
+	}
+	return 1;
+}
+
+sub install {
+	my ($this, $destdir, @args) = @_;
+	my $target = $this->get_targetbuildsystem;
+
+	if (compat(13) or $target->NAME ne 'ninja') {
+		$target->install($destdir, @args);
+	} else {
+		# In compat 14 with meson+ninja, we prefer using "meson install"
+		# over "ninja install"
+		my %options = (
+			update_env => {
+				'LC_ALL' => 'C.UTF-8',
+			}
+		);
+		$this->doit_in_builddir(\%options, 'meson', 'install', '--destdir', $destdir, @args);
+	}
+	return 1;
+}
+
+
+
+1
diff --git a/lib/Debian/Debhelper/Buildsystem/ninja.pm b/lib/Debian/Debhelper/Buildsystem/ninja.pm
new file mode 100644
index 0000000..c08ff16
--- /dev/null
+++ b/lib/Debian/Debhelper/Buildsystem/ninja.pm
@@ -0,0 +1,90 @@
+# A debhelper build system class for handling ninja based projects.
+#
+# Copyright: © 2017 Michael Biebl
+# License: GPL-2+
+
+package Debian::Debhelper::Buildsystem::ninja;
+
+use strict;
+use warnings;
+use Debian::Debhelper::Dh_Lib qw(%dh dpkg_architecture_value);
+use parent qw(Debian::Debhelper::Buildsystem);
+
+sub DESCRIPTION {
+	"Ninja (build.ninja)"
+}
+
+sub new {
+	my $class=shift;
+	my $this=$class->SUPER::new(@_);
+	$this->{buildcmd} = "ninja";
+	return $this;
+}
+
+sub check_auto_buildable {
+	my $this=shift;
+	my ($step) = @_;
+
+	if (-e $this->get_buildpath("build.ninja"))
+	{
+		# This is always called in the source directory, but generally
+		# Ninja files are created (or live) in the build directory.
+		return 1;
+	}
+	return 0;
+}
+
+sub build {
+	my $this=shift;
+	my %options = (
+		update_env => {
+			'LC_ALL' => 'C.UTF-8',
+		}
+	);
+	if (!$dh{QUIET}) {
+		unshift @_, "-v";
+	}
+	if ($this->get_parallel() > 0) {
+		unshift @_, "-j" . $this->get_parallel();
+	}
+	$this->doit_in_builddir(\%options, $this->{buildcmd}, @_);
+}
+
+sub test {
+	my $this=shift;
+	my %options = (
+		update_env => {
+			'LC_ALL' => 'C.UTF-8',
+		}
+	);
+	if ($this->get_parallel() > 0) {
+		$options{update_env}{MESON_TESTTHREADS} = $this->get_parallel();
+	}
+	$this->doit_in_builddir(\%options, $this->{buildcmd}, "test", @_);
+}
+
+sub install {
+	my $this=shift;
+	my $destdir=shift;
+	my %options = (
+		update_env => {
+			'LC_ALL'  => 'C.UTF-8',
+			'DESTDIR' => $destdir,
+		}
+	);
+	$this->doit_in_builddir(\%options, $this->{buildcmd}, "install", @_);
+}
+
+sub clean {
+	my $this=shift;
+	if (!$this->rmdir_builddir()) {
+		my %options = (
+			update_env => {
+				'LC_ALL'  => 'C.UTF-8',
+			}
+		);
+		$this->doit_in_builddir(\%options, $this->{buildcmd}, "clean", @_);
+	}
+}
+
+1
diff --git a/lib/Debian/Debhelper/Buildsystem/perl_build.pm b/lib/Debian/Debhelper/Buildsystem/perl_build.pm
new file mode 100644
index 0000000..8752905
--- /dev/null
+++ b/lib/Debian/Debhelper/Buildsystem/perl_build.pm
@@ -0,0 +1,97 @@
+# A build system class for handling Perl Build based projects.
+#
+# Copyright: © 2008-2009 Joey Hess
+#            © 2008-2009 Modestas Vainius
+# License: GPL-2+
+
+package Debian::Debhelper::Buildsystem::perl_build;
+
+use strict;
+use warnings;
+use Debian::Debhelper::Dh_Lib qw(compat is_cross_compiling perl_cross_incdir warning);
+use parent qw(Debian::Debhelper::Buildsystem);
+use Config;
+
+sub DESCRIPTION {
+	"Perl Module::Build (Build.PL)"
+}
+
+sub check_auto_buildable {
+	my ($this, $step) = @_;
+
+	# Handles everything
+	my $ret = -e $this->get_sourcepath("Build.PL");
+	if ($step ne "configure") {
+		$ret &&= -e $this->get_sourcepath("Build");
+	}
+	return $ret ? 1 : 0;
+}
+
+sub do_perl {
+	my $this=shift;
+	my %options;
+	if (is_cross_compiling()) {
+		my $cross_incdir = perl_cross_incdir();
+		if (defined $cross_incdir) {
+			my $perl5lib = $cross_incdir;
+			$perl5lib .= $Config{path_sep} . $ENV{PERL5LIB}
+				if defined $ENV{PERL5LIB};
+			$options{update_env} = { PERL5LIB => $perl5lib };
+		} else {
+			warning("cross Config.pm does not exist (missing build dependency on perl-xs-dev?)");
+		}
+	}
+	$this->doit_in_sourcedir(\%options, $^X, @_);
+}
+
+sub new {
+	my $class=shift;
+	my $this= $class->SUPER::new(@_);
+	$this->enforce_in_source_building();
+	return $this;
+}
+
+sub configure {
+	my $this=shift;
+	my (@flags, @perl_flags);
+	$ENV{PERL_MM_USE_DEFAULT}=1;
+	if ($ENV{CFLAGS} && ! compat(8)) {
+		push @flags, "--config", "optimize=$ENV{CFLAGS} $ENV{CPPFLAGS}";
+	}
+	if ($ENV{LDFLAGS} && ! compat(8)) {
+		my $ld = $Config{ld};
+		if (is_cross_compiling()) {
+			my $incdir = perl_cross_incdir();
+			$ld = qx/perl -I$incdir -MConfig -e 'print \$Config{ld}'/
+				if defined $incdir;
+		}
+		push @flags, "--config", "ld=$ld $ENV{CFLAGS} $ENV{LDFLAGS}";
+	}
+	push(@perl_flags, '-I.') if compat(10);
+	$this->do_perl(@perl_flags, "Build.PL", "--installdirs", "vendor", @flags, @_);
+}
+
+sub build {
+	my $this=shift;
+	$this->do_perl("Build", @_);
+}
+
+sub test {
+	my $this=shift;
+	$this->do_perl("Build", "test", "--verbose", 1, @_);
+}
+
+sub install {
+	my $this=shift;
+	my $destdir=shift;
+	$this->do_perl("Build", "install", "--destdir", "$destdir", "--create_packlist", 0, @_);
+}
+
+sub clean {
+	my $this=shift;
+	if (-e $this->get_sourcepath("Build")) {
+		$this->do_perl("Build", "realclean", "--allow_mb_mismatch", 1, @_);
+	}
+}
+
+1
diff --git a/lib/Debian/Debhelper/Buildsystem/perl_makemaker.pm b/lib/Debian/Debhelper/Buildsystem/perl_makemaker.pm
new file mode 100644
index 0000000..881f1ec
--- /dev/null
+++ b/lib/Debian/Debhelper/Buildsystem/perl_makemaker.pm
@@ -0,0 +1,104 @@
+# A debhelper build system class for handling Perl MakeMaker based projects.
+#
+# Copyright: © 2008-2009 Joey Hess
+#            © 2008-2009 Modestas Vainius
+# License: GPL-2+
+
+package Debian::Debhelper::Buildsystem::perl_makemaker;
+
+use strict;
+use warnings;
+use Debian::Debhelper::Dh_Lib qw(compat is_cross_compiling perl_cross_incdir warning);
+use parent qw(Debian::Debhelper::Buildsystem::makefile);
+use Config;
+
+sub DESCRIPTION {
+	"Perl ExtUtils::MakeMaker (Makefile.PL)"
+}
+
+sub check_auto_buildable {
+	my $this=shift;
+	my ($step)=@_;
+
+	# Handles everything if Makefile.PL exists. Otherwise - next class.
+	if (-e $this->get_sourcepath("Makefile.PL")) {
+		if ($step eq "configure") {
+			return 1;
+		}
+		else {
+			return $this->SUPER::check_auto_buildable(@_);
+		}
+	}
+	return 0;
+}
+
+sub new {
+	my $class=shift;
+	my $this=$class->SUPER::new(@_);
+	$this->enforce_in_source_building();
+	return $this;
+}
+
+sub configure {
+	my $this=shift;
+	my (@flags, @perl_flags);
+	# If set to a true value then MakeMaker's prompt function will
+	# # always return the default without waiting for user input.
+	$ENV{PERL_MM_USE_DEFAULT}=1;
+	# This prevents  Module::Install from interactive behavior.
+	$ENV{PERL_AUTOINSTALL}="--skipdeps";
+
+	if ($ENV{CFLAGS} && ! compat(8)) {
+		push @flags, "OPTIMIZE=$ENV{CFLAGS} $ENV{CPPFLAGS}";
+	}
+	my $cross_flag;
+	if (is_cross_compiling()) {
+		my $incdir = perl_cross_incdir();
+		if (defined $incdir) {
+			$cross_flag = "-I$incdir";
+		} else {
+			warning("cross Config.pm does not exist (missing build dependency on perl-xs-dev?)");
+		}
+	}
+	if ($ENV{LDFLAGS} && ! compat(8)) {
+		my $ld = $Config{ld};
+		$ld = qx/perl $cross_flag -MConfig -e 'print \$Config{ld}'/
+			if is_cross_compiling() and defined $cross_flag;
+		push @flags, "LD=$ld $ENV{CFLAGS} $ENV{LDFLAGS}";
+	}
+
+	push(@perl_flags, '-I.') if compat(10);
+
+	push @perl_flags, $cross_flag
+		if is_cross_compiling() and defined $cross_flag;
+
+	$this->doit_in_sourcedir($^X, @perl_flags, "Makefile.PL", "INSTALLDIRS=vendor",
+		# if perl_build is not tested first, need to pass packlist
+		# option to handle fallthrough case
+		(compat(7) ? "create_packlist=0" : ()),
+		@flags, @_);
+}
+
+sub test {
+	my $this=shift;
+	# Make tests verbose
+	$this->SUPER::test("TEST_VERBOSE=1", @_);
+}
+
+sub install {
+	my $this=shift;
+	my $destdir=shift;
+
+	# Special case for Makefile.PL that uses
+	# Module::Build::Compat. PREFIX should not be passed
+	# for those; it already installs into /usr by default.
+	my $makefile=$this->get_sourcepath("Makefile");
+	if (system(qq{grep -q "generated automatically by MakeMaker" $makefile}) != 0) {
+		$this->SUPER::install($destdir, @_);
+	}
+	else {
+		$this->SUPER::install($destdir, "PREFIX=/usr", @_);
+	}
+}
+
+1
diff --git a/lib/Debian/Debhelper/Buildsystem/python_distutils.pm b/lib/Debian/Debhelper/Buildsystem/python_distutils.pm
new file mode 100644
index 0000000..e5fe7ed
--- /dev/null
+++ b/lib/Debian/Debhelper/Buildsystem/python_distutils.pm
@@ -0,0 +1,214 @@
+# A debhelper build system class for building Python Distutils based
+# projects. It prefers out of source tree building.
+#
+# Copyright: © 2008 Joey Hess
+#            © 2008-2009 Modestas Vainius
+# License: GPL-2+
+
+package Debian::Debhelper::Buildsystem::python_distutils;
+
+use strict;
+use warnings;
+use Cwd ();
+use Debian::Debhelper::Dh_Lib qw(error deprecated_functionality);
+use parent qw(Debian::Debhelper::Buildsystem);
+
+sub DESCRIPTION {
+	"Python Distutils (setup.py) [DEPRECATED]"
+}
+
+sub DEFAULT_BUILD_DIRECTORY {
+	my $this=shift;
+	return $this->canonpath($this->get_sourcepath("build"));
+}
+
+sub new {
+	my $class=shift;
+	my $this=$class->SUPER::new(@_);
+	# Out of source tree building is preferred.
+	$this->prefer_out_of_source_building(@_);
+	return $this;
+}
+
+sub check_auto_buildable {
+	my $this=shift;
+	return -e $this->get_sourcepath("setup.py") ? 1 : 0;
+}
+
+sub not_our_cfg {
+	my $this=shift;
+	my $ret;
+	if (open(my $cfg, '<', $this->get_buildpath(".pydistutils.cfg"))) {
+		$ret = not "# Created by dh_auto\n" eq <$cfg>;
+		close $cfg;
+	}
+	return $ret;
+}
+
+sub create_cfg {
+	my $this=shift;
+	if (open(my $cfg, ">", $this->get_buildpath(".pydistutils.cfg"))) {
+		print $cfg "# Created by dh_auto", "\n";
+		print $cfg "[build]\nbuild-base=", $this->get_build_rel2sourcedir(), "\n";
+		close $cfg;
+		return 1;
+	}
+	return 0;
+}
+
+sub pre_building_step {
+	my $this=shift;
+	my $step=shift;
+
+	deprecated_functionality('Please use the third-party "pybuild" build system instead of python-distutils',
+		12);
+
+	return unless grep /$step/, qw(build install clean);
+
+	if ($this->get_buildpath() ne $this->DEFAULT_BUILD_DIRECTORY()) {
+		# --build-base can only be passed to the build command. However,
+		# it is always read from the config file (really weird design).
+		# Therefore create such a cfg config file.
+		# See http://bugs.python.org/issue818201
+		#     http://bugs.python.org/issue1011113
+		not $this->not_our_cfg() or
+		    error("cannot set custom build directory: .pydistutils.cfg is in use");
+		$this->mkdir_builddir();
+		$this->create_cfg() or
+		    error("cannot set custom build directory: unwritable .pydistutils.cfg");
+		# Distutils reads $HOME/.pydistutils.cfg
+		$ENV{HOME} = Cwd::abs_path($this->get_buildpath());
+	}
+
+	$this->SUPER::pre_building_step($step);
+}
+
+sub dbg_build_needed {
+	my $this=shift;
+	my $act=shift;
+
+	# Return a list of python-dbg package which are listed
+	# in the build-dependencies. This is kinda ugly, but building
+	# dbg extensions without checking if they're supposed to be
+	# built may result in various FTBFS if the package is not
+	# built in a clean chroot.
+
+	my @dbg;
+	open (my $fd, '<', 'debian/control') ||
+		error("cannot read debian/control: $!\n");
+	foreach my $builddeps (join('', <$fd>) =~
+			/^Build-Depends[^:]*:.*\n(?:^[^\w\n].*\n)*/gmi) {
+		while ($builddeps =~ /(python[^, ]*-dbg)/g) {
+			push @dbg, $1;
+		}
+	}
+
+	close($fd);
+	return @dbg;
+
+}
+
+sub setup_py {
+	my $this=shift;
+	my $act=shift;
+
+	# We need to run setup.py with the default python last
+	# as distutils/setuptools modifies the shebang lines of scripts.
+	# This ensures that #!/usr/bin/python is installed last and
+	# not pythonX.Y
+	# Take into account that the default Python must not be in
+	# the requested Python versions.
+	# Then, run setup.py with each available python, to build
+	# extensions for each.
+
+	my $python_default = `pyversions -d`;
+	if ($? == -1) {
+		error("failed to run pyversions")
+	}
+	my $ecode = $? >> 8;
+	if ($ecode != 0) {
+		error("pyversions -d failed [$ecode]")
+	}
+	$python_default =~ s/^\s+//;
+	$python_default =~ s/\s+$//;
+	my @python_requested = split ' ', `pyversions -r`;
+	if ($? == -1) {
+		error("failed to run pyversions")
+	}
+	$ecode = $? >> 8;
+	if ($ecode != 0) {
+		error("pyversions -r failed [$ecode]")
+	}
+	if (grep /^\Q$python_default\E/, @python_requested) {
+		@python_requested = (
+			grep(!/^\Q$python_default\E/, @python_requested),
+			"python",
+		);
+	}
+
+	my @python_dbg;
+	my @dbg_build_needed = $this->dbg_build_needed();
+	foreach my $python (map { $_."-dbg" } @python_requested) {
+		if (grep /^(python-all-dbg|\Q$python\E)/, @dbg_build_needed) {
+			push @python_dbg, $python;
+		}
+		elsif (($python eq "python-dbg")
+		       and (grep /^\Q$python_default\E/, @dbg_build_needed)) {
+			push @python_dbg, $python_default."-dbg";
+		}
+	}
+
+	foreach my $python (@python_dbg, @python_requested) {
+		if (-x "/usr/bin/".$python) {
+			# To allow backports of debhelper we don't pass
+			# --install-layout=deb to 'setup.py install` for
+			# those Python versions where the option is
+			# ignored by distutils/setuptools.
+			if ( $act eq "install" and not
+			     ( ($python =~ /^python(?:-dbg)?$/
+			         and $python_default =~ /^python2\.[2345]$/)
+			      or $python =~ /^python2\.[2345](?:-dbg)?$/ )) {
+				$this->doit_in_sourcedir($python, "setup.py",
+						$act, @_, "--install-layout=deb");
+			}
+			else {
+				$this->doit_in_sourcedir($python, "setup.py",
+						$act, @_);
+			}
+		}
+	}
+}
+
+sub build {
+	my $this=shift;
+	$this->setup_py("build",
+		"--force",
+		@_);
+}
+
+sub install {
+	my $this=shift;
+	my $destdir=shift;
+	$this->setup_py("install",
+		"--force",
+		"--root=$destdir",
+		"--no-compile",
+		"-O0",
+		@_);
+}
+
+sub clean {
+	my $this=shift;
+	$this->setup_py("clean", "-a", @_);
+
+	# Config file will remain if it was created by us
+	if (!$this->not_our_cfg()) {
+		unlink($this->get_buildpath(".pydistutils.cfg"));
+		$this->rmdir_builddir(1); # only if empty
+	}
+	# The setup.py might import files, leading to python creating pyc
+	# files.
+	$this->doit_in_sourcedir('find', '.', '-name', '*.pyc', '-exec', 'rm', '{}', '+');
+}
+
+1
diff --git a/lib/Debian/Debhelper/Buildsystem/qmake.pm b/lib/Debian/Debhelper/Buildsystem/qmake.pm
new file mode 100644
index 0000000..18b896d
--- /dev/null
+++ b/lib/Debian/Debhelper/Buildsystem/qmake.pm
@@ -0,0 +1,103 @@
+# A debhelper build system class for Qt projects
+# (based on the makefile class).
+#
+# Copyright: © 2010 Kelvin Modderman
+# License: GPL-2+
+
+package Debian::Debhelper::Buildsystem::qmake;
+
+use strict;
+use warnings;
+use Debian::Debhelper::Dh_Lib qw(dpkg_architecture_value error is_cross_compiling);
+use parent qw(Debian::Debhelper::Buildsystem::makefile);
+
+my %OS_MKSPEC_MAPPING = (
+	'linux'    => 'linux-g++',
+	'kfreebsd' => 'gnukfreebsd-g++',
+	'hurd'     => 'hurd-g++',
+);
+
+sub DESCRIPTION {
+	"qmake (*.pro)";
+}
+
+sub check_auto_buildable {
+	my $this=shift;
+	my @projects=glob($this->get_sourcepath('*.pro'));
+	my $ret=0;
+
+	if (@projects > 0) {
+		$ret=1;
+		# Existence of a Makefile generated by qmake indicates qmake
+		# class has already been used by a prior build step, so should
+		# be used instead of the parent makefile class.
+		my $mf=$this->get_buildpath("Makefile");
+		if (-e $mf) {
+			$ret = $this->SUPER::check_auto_buildable(@_);
+			open(my $fh, '<', $mf)
+				or error("unable to open Makefile: $mf");
+			while(<$fh>) {
+				if (m/^# Generated by qmake/i) {
+					$ret++;
+					last;
+				}
+			}
+			close($fh);
+		}
+	}
+
+	return $ret;
+}
+
+sub configure {
+	my $this=shift;
+	my @options;
+	my @flags;
+
+	push @options, '-makefile';
+	if (is_cross_compiling()) {
+		my $host_os = dpkg_architecture_value("DEB_HOST_ARCH_OS");
+
+		if (defined(my $spec = $OS_MKSPEC_MAPPING{$host_os})) {
+			push(@options, "-spec", $spec);
+		} else {
+			error("Cannot cross-compile: Missing entry for HOST OS ${host_os} for qmake's -spec option");
+		}
+	}
+
+	if ($ENV{CFLAGS}) {
+		push @flags, "QMAKE_CFLAGS_RELEASE=$ENV{CFLAGS} $ENV{CPPFLAGS}";
+		push @flags, "QMAKE_CFLAGS_DEBUG=$ENV{CFLAGS} $ENV{CPPFLAGS}";
+	}
+	if ($ENV{CXXFLAGS}) {
+		push @flags, "QMAKE_CXXFLAGS_RELEASE=$ENV{CXXFLAGS} $ENV{CPPFLAGS}";
+		push @flags, "QMAKE_CXXFLAGS_DEBUG=$ENV{CXXFLAGS} $ENV{CPPFLAGS}";
+	}
+	if ($ENV{LDFLAGS}) {
+		push @flags, "QMAKE_LFLAGS_RELEASE=$ENV{LDFLAGS}";
+		push @flags, "QMAKE_LFLAGS_DEBUG=$ENV{LDFLAGS}";
+	}
+	push @flags, "QMAKE_STRIP=:";
+	push @flags, "PREFIX=/usr";
+
+	$this->mkdir_builddir();
+	$this->doit_in_builddir($this->_qmake(), @options, @flags, @_);
+}
+
+sub install {
+	my $this=shift;
+	my $destdir=shift;
+
+	# qmake generated Makefiles use INSTALL_ROOT in install target
+	# where one would expect DESTDIR to be used.
+	$this->SUPER::install($destdir, "INSTALL_ROOT=$destdir", @_);
+}
+
+sub _qmake {
+	if (is_cross_compiling()) {
+		return dpkg_architecture_value("DEB_HOST_GNU_TYPE") . "-qmake";
+	}
+	return 'qmake';
+}
+
+1
diff --git a/lib/Debian/Debhelper/Buildsystem/qmake_qt4.pm b/lib/Debian/Debhelper/Buildsystem/qmake_qt4.pm
new file mode 100644
index 0000000..60d9084
--- /dev/null
+++ b/lib/Debian/Debhelper/Buildsystem/qmake_qt4.pm
@@ -0,0 +1,15 @@
+package Debian::Debhelper::Buildsystem::qmake_qt4;
+
+use strict;
+use warnings;
+use parent qw(Debian::Debhelper::Buildsystem::qmake);
+
+sub DESCRIPTION {
+	"qmake for QT 4 (*.pro)";
+}
+
+sub _qmake {
+	return 'qmake-qt4';
+}
+
+1
diff --git a/lib/Debian/Debhelper/DH/AddonAPI.pm b/lib/Debian/Debhelper/DH/AddonAPI.pm
new file mode 100644
index 0000000..44082a9
--- /dev/null
+++ b/lib/Debian/Debhelper/DH/AddonAPI.pm
@@ -0,0 +1,228 @@
+# Defines dh sequence state variables
+#
+# License: GPL-2+
+
+package Debian::Debhelper::DH::AddonAPI;
+use strict;
+use warnings;
+
+use Debian::Debhelper::Dh_Lib qw(warning error);
+use Debian::Debhelper::Sequence;
+use Debian::Debhelper::SequencerUtil;
+use Debian::Debhelper::DH::SequenceState;
+
+
+our ($DH_INTERNAL_ADDON_TYPE, $DH_INTERNAL_ADDON_NAME);
+
+sub _add_sequence {
+	my @args = @_;
+	my $seq = Debian::Debhelper::Sequence->new(@args);
+	my $name = $seq->name;
+	$Debian::Debhelper::DH::SequenceState::sequences{$name} = $seq;
+	if ($seq->allowed_subsequences eq SEQUENCE_ARCH_INDEP_SUBSEQUENCES) {
+		for my $subseq ((SEQUENCE_TYPE_ARCH_ONLY, SEQUENCE_TYPE_INDEP_ONLY)) {
+			my $subname = "${name}-${subseq}";
+			$Debian::Debhelper::DH::SequenceState::sequences{$subname} = $seq;
+		}
+	}
+	return;
+}
+
+sub _skip_cmd_if_deb_build_options_contains {
+	my ($command, $flag) = @_;
+	push(@{$Debian::Debhelper::DH::SequenceState::commands_skippable_via_deb_build_options{$command}}, $flag);
+	return;
+}
+
+sub _assert_not_conditional_sequence_addon {
+	my ($feature) = @_;
+	return if $DH_INTERNAL_ADDON_TYPE eq 'both';
+	warning("The add-on ${DH_INTERNAL_ADDON_NAME} relies on a feature (${feature}) (possibly indirectly), which is "
+		. 'not supported for conditional debhelper sequence add-ons.');
+	warning("Hint: You may have to move the build-dependency for dh-sequence-${DH_INTERNAL_ADDON_NAME} to "
+		. 'Build-Depends to avoid this error assuming it is possible to use the sequence unconditionally.');
+	error("${feature} is not supported for conditional dh sequence add-ons.\n");
+}
+
+sub _filter_sequences_for_conditional_add_ons {
+	my @sequences = @_;
+	# If it is unconditional, then there is no issues.
+	return @sequences if $DH_INTERNAL_ADDON_TYPE eq 'both' or not @sequences;
+	for my $seq (@sequences) {
+		# Typically, if you add a command to a sequence, then you will in fact add it to two. E.g.
+		# Adding dh_foo after dh_installdocs will affect both install-arch AND install-indep.  We want
+		# this to "just work(tm)" with a conditional add-on to avoid too much hassle (i.e. only affect
+		# the relevant sequence).  At the same time, we must abort if a sequence like "clean" is
+		# affected.
+		#
+		# We solve the above by checking if the sequence has an -arch + an -indep variant and then
+		# insert the command only for that sequence variant.
+
+		if ($seq->allowed_subsequences ne SEQUENCE_ARCH_INDEP_SUBSEQUENCES) {
+			my $sequence_name = $seq->name;
+			warning("The add-on ${DH_INTERNAL_ADDON_NAME} attempted to modify the sequence ${sequence_name} (possibly "
+				. "indirectly) but the add-on is conditional for \"*-${DH_INTERNAL_ADDON_TYPE}\" targets");
+			warning("Hint: You may have to move the build-dependency for dh-sequence-${DH_INTERNAL_ADDON_NAME} to "
+				. 'Build-Depends to avoid this error assuming it is possible to use the sequence unconditionally.');
+			error("The add-on ${DH_INTERNAL_ADDON_NAME} cannot be use conditionally for \"*-${DH_INTERNAL_ADDON_TYPE}\""
+				. " targets\n");
+		}
+	}
+	return @sequences;
+}
+
+sub _register_cmd_added_by_addon {
+	my ($cmd) = @_;
+	my $existing = $Debian::Debhelper::DH::SequenceState::commands_added_by_addon{$cmd};
+	if ($existing) {
+		if ($existing->{'addon-type'} ne $DH_INTERNAL_ADDON_TYPE) {
+			my $old_addon_name = $existing->{'addon-name'};
+			my $old_addon_type = $existing->{'addon-type'};
+			# Technically, "both" could be made compatible with "indep" OR "arch" (but not both at the same time).
+			# Implement if it turns out to be relevant.
+			warning("Both dh sequence add-ons ${DH_INTERNAL_ADDON_NAME} and ${old_addon_name} have attempted to add "
+				. "the command $cmd (possibly indirectly).");
+			warning("However, the two add-ons do not have compatible constraints (${DH_INTERNAL_ADDON_TYPE} vs. "
+				. "${old_addon_type}).");
+			warning("Hint: You may have to move the build-dependency for dh-sequence-<X> to "
+				. ' the same build-dependency field to avoid this error assuming it is possible.');
+			error("Multiple sequences have conflicting requests for $cmd.\n");
+		}
+		return;
+	}
+
+	$Debian::Debhelper::DH::SequenceState::commands_added_by_addon{$cmd} = {
+		'addon-name' => $DH_INTERNAL_ADDON_NAME,
+		'addon-type' => $DH_INTERNAL_ADDON_TYPE,
+	};
+	return;
+}
+
+sub _sequences_containing_cmd {
+	my ($cmd) = @_;
+	my @sequences;
+	foreach my $sequence_name (keys(%Debian::Debhelper::DH::SequenceState::sequences)) {
+		my $seq = $Debian::Debhelper::DH::SequenceState::sequences{$sequence_name};
+		for my $scmd (@{$seq->{'_cmds'}}) {
+			if ($scmd->{'command'} eq $cmd) {
+				push(@sequences, $seq);
+				last;
+			}
+		}
+	}
+	return @sequences;
+}
+
+sub _seq_cmd {
+	my ($cmd_name) = @_;
+	return {
+		'command'             => $cmd_name,
+		'command-options'     => [],
+		'sequence-limitation' => $DH_INTERNAL_ADDON_TYPE,
+	};
+}
+
+# sequence addon interface
+sub _insert {
+	my ($offset, $existing, $new) = @_;
+	my @affected_sequences = _sequences_containing_cmd($existing);
+	@affected_sequences = _filter_sequences_for_conditional_add_ons(@affected_sequences);
+	return if not @affected_sequences;
+	_register_cmd_added_by_addon($new);
+	for my $seq (@affected_sequences) {
+		$seq->_insert($offset, $existing, _seq_cmd($new));
+	}
+	return 1;
+}
+sub insert_before {
+	return _insert(-1, @_);
+}
+sub insert_after {
+	return _insert(1, @_);
+}
+sub remove_command {
+	my ($command) = @_;
+	# Implement if actually needed (I *think* it basically means to transform dh_foo to dh_foo -a/-i)
+	_assert_not_conditional_sequence_addon('remove_command');
+	my @affected_sequences = _sequences_containing_cmd($command);
+	@affected_sequences = _filter_sequences_for_conditional_add_ons(@affected_sequences);
+	return 1 if not @affected_sequences;
+	for my $seq (@affected_sequences) {
+		$seq->remove_command($command);
+	}
+	return 1;
+}
+sub add_command {
+	my ($command, $sequence) = @_;
+	_assert_not_conditional_sequence_addon('add_command');
+	_register_cmd_added_by_addon($command);
+	if (not exists($Debian::Debhelper::DH::SequenceState::sequences{$sequence})) {
+		_add_sequence($sequence, SEQUENCE_NO_SUBSEQUENCES, _seq_cmd($command));
+	} else {
+		my $seq = $Debian::Debhelper::DH::SequenceState::sequences{$sequence};
+		_filter_sequences_for_conditional_add_ons($seq);
+		$seq->add_command_at_start(_seq_cmd($command))
+	}
+	return 1;
+}
+sub add_command_at_end {
+	my ($command, $sequence) = @_;
+	_assert_not_conditional_sequence_addon('add_command');
+	_register_cmd_added_by_addon($command);
+	if (not exists($Debian::Debhelper::DH::SequenceState::sequences{$sequence})) {
+		_add_sequence($sequence, SEQUENCE_NO_SUBSEQUENCES, _seq_cmd($command));
+	} else {
+		my $seq = $Debian::Debhelper::DH::SequenceState::sequences{$sequence};
+		_filter_sequences_for_conditional_add_ons($seq);
+		$seq->add_command_at_end(_seq_cmd($command))
+	}
+	return 1;
+}
+
+sub add_command_options {
+	my $command=shift;
+	# Implement if actually needed (Complicated as dh_foo becomes dh_foo -a && dh_foo -i <extra_options>
+	# and that implies smarter deduplication logic)
+	_assert_not_conditional_sequence_addon('add_command_options');
+	push(@{$Debian::Debhelper::DH::SequenceState::command_opts{$command}}, @_);
+	return 1;
+}
+
+sub remove_command_options {
+	my ($command, @cmd_options) = @_;
+	# Implement if actually needed (Complicated as dh_foo <extra_options> becomes
+	#   dh_foo -a  <extra_options> && dh_foo -i and that implies smarter deduplication logic)
+	_assert_not_conditional_sequence_addon('remove_command_options');
+	if (@cmd_options) {
+		# Remove only specified options
+		if (my $opts = $Debian::Debhelper::DH::SequenceState::command_opts{$command}) {
+			foreach my $opt (@cmd_options) {
+				$opts = [ grep { $_ ne $opt } @$opts ];
+			}
+			$Debian::Debhelper::DH::SequenceState::command_opts{$command} = $opts;
+		}
+	}
+	else {
+		# Clear all additional options
+		delete($Debian::Debhelper::DH::SequenceState::command_opts{$command});
+	}
+	return 1;
+}
+
+sub declare_command_obsolete {
+	my ($error_compat, $command) = @_;
+	if (not defined($command) and defined($error_compat)) {
+		# Backwards compat - originally this only accepted one command.
+		$command = $error_compat;
+		$error_compat = 13;
+	}
+	if ($error_compat < 13) {
+		error("Minimum error compat is 13 (got ${error_compat} for command: ${command})");
+	}
+	_assert_not_conditional_sequence_addon('declare_command_obsolete');
+	$Debian::Debhelper::DH::SequenceState::obsolete_command{$command} = [$DH_INTERNAL_ADDON_NAME, $error_compat];
+	return 1;
+}
+
+
+1;
diff --git a/lib/Debian/Debhelper/DH/SequenceState.pm b/lib/Debian/Debhelper/DH/SequenceState.pm
new file mode 100644
index 0000000..b029e01
--- /dev/null
+++ b/lib/Debian/Debhelper/DH/SequenceState.pm
@@ -0,0 +1,31 @@
+# Defines dh sequence state variables
+#
+# License: GPL-2+
+
+package Debian::Debhelper::DH::SequenceState;
+use strict;
+use warnings;
+
+our (
+	# Definitions of sequences.
+	%sequences,
+	# Additional command options
+	%command_opts,
+	# Track commands added by (which) addons
+	%commands_added_by_addon,
+	# Removed commands
+	%obsolete_command,
+	# Commands that can be skipped due to DEB_BUILD_OPTIONS=X flags
+	%commands_skippable_via_deb_build_options,
+	# Options passed that should be passed on to underlying helpers (in order)
+	@options,
+	# Options passed by name (to assist can_skip with which options are used)
+	%seen_options,
+	# Whether there were sequences of options that inhibit certain optimizations
+	# * $unoptimizable_option_bundle => can skip iff cli-options hint is present and empty
+	# * $unoptimizable_user_option => We can never skip anything (non-option seen)
+	$unoptimizable_option_bundle,
+	$unoptimizable_user_option,
+);
+
+1;
diff --git a/lib/Debian/Debhelper/Dh_Buildsystems.pm b/lib/Debian/Debhelper/Dh_Buildsystems.pm
new file mode 100644
index 0000000..9918969
--- /dev/null
+++ b/lib/Debian/Debhelper/Dh_Buildsystems.pm
@@ -0,0 +1,319 @@
+# A module for loading and managing debhelper build system classes.
+# This module is intended to be used by all dh_auto_* programs.
+#
+# Copyright: © 2009 Modestas Vainius
+# License: GPL-2+
+
+package Debian::Debhelper::Dh_Buildsystems;
+
+use strict;
+use warnings;
+use Debian::Debhelper::Buildsystem;
+use Debian::Debhelper::Dh_Lib;
+use File::Spec;
+
+use Exporter qw(import);
+our @EXPORT=qw(&buildsystems_init &buildsystems_do &load_buildsystem &load_all_buildsystems);
+
+use constant BUILD_STEPS => qw(configure build test install clean);
+
+# Historical order must be kept for backwards compatibility. New
+# build systems MUST be added to the END of the list.
+our @BUILDSYSTEMS = (
+	"autoconf",
+	(! compat(7) ? "perl_build" : ()),
+	"perl_makemaker",
+	"makefile",
+	"python_distutils",
+	(compat(7) ? "perl_build" : ()),
+	"cmake+makefile",
+	"cmake+ninja",
+	"ant",
+	"qmake",
+	"qmake_qt4",
+	"meson+ninja",
+	"ninja",
+);
+
+our @THIRD_PARTY_BUILDSYSTEMS = (
+	'maven',
+	'gradle',
+	'mkcmake',
+	'bmake',
+	'golang',
+);
+
+# Visible for dh_assistant's sake; not API for external tools!
+our $opt_buildsys;
+my $opt_sourcedir;
+my $opt_builddir;
+my $opt_list;
+my $opt_parallel;
+
+*create_buildsystem_instance = \&Debian::Debhelper::Buildsystem::_create_buildsystem_instance;
+
+sub _insert_cmd_opts {
+	my (%bsopts) = @_;
+	if (!exists $bsopts{builddir} && defined $opt_builddir) {
+		$bsopts{builddir} = ($opt_builddir eq "") ? undef : $opt_builddir;
+	}
+	if (!exists $bsopts{sourcedir} && defined $opt_sourcedir) {
+		$bsopts{sourcedir} = ($opt_sourcedir eq "") ? undef : $opt_sourcedir;
+	}
+	if (!exists $bsopts{parallel}) {
+		$bsopts{parallel} = $opt_parallel;
+	}
+	return %bsopts;
+}
+
+# Autoselect a build system from the list of instances
+sub autoselect_buildsystem {
+	my $step=shift;
+	my $selected;
+	my $selected_level = 0;
+
+	foreach my $inst (@_) {
+		# Only  more specific build system can be considered beyond
+		# the currently selected one.
+		if (defined($selected)) {
+			my $ok = $inst->isa(ref($selected)) ? 1 : 0;
+			if (not $ok and $inst->IS_GENERATOR_BUILD_SYSTEM) {
+				$ok = 1 if $inst->get_targetbuildsystem->NAME eq $selected->NAME;
+			}
+			next if not $ok;
+		}
+
+		# If the build system says it is auto-buildable at the current
+		# step and it can provide more specific information about its
+		# status than its parent (if any), auto-select it.
+		my $level = $inst->check_auto_buildable($step);
+		if ($level > $selected_level) {
+			$selected = $inst;
+			$selected_level = $level;
+		}
+	}
+	return $selected;
+}
+
+# Similar to create_buildsystem_instance(), but it attempts to autoselect
+# a build system if none was specified. In case autoselection fails or an
+# explicit “none” is requested, undef is returned.
+sub load_buildsystem {
+	my $system=shift;
+	my $step=shift;
+	my %opts = _insert_cmd_opts(@_);
+	my $system_options;
+	if (defined($system) && ref($system) eq 'HASH') {
+		$system_options = $system;
+		$system = $system_options->{'system'};
+	}
+	if (defined $system) {
+		return undef if $system eq 'none';
+		my $inst = create_buildsystem_instance($system, 1, %opts);
+		return $inst;
+	}
+	else {
+		# Try to determine build system automatically
+		my @buildsystems;
+		foreach $system (@BUILDSYSTEMS) {
+			push @buildsystems, create_buildsystem_instance($system, 1, %opts);
+		}
+		if (!$system_options || $system_options->{'enable-thirdparty'}) {
+			foreach $system (@THIRD_PARTY_BUILDSYSTEMS) {
+				push @buildsystems, create_buildsystem_instance($system, 0, %opts);
+			}
+		}
+		return autoselect_buildsystem($step, @buildsystems);
+	}
+}
+
+sub load_all_buildsystems {
+	my $incs=shift || \@INC;
+	my %opts = _insert_cmd_opts(@_);
+	my (%buildsystems, %genbuildsystems, @buildsystems);
+
+	foreach my $inc (@$incs) {
+		my $path = File::Spec->catdir($inc, "Debian/Debhelper/Buildsystem");
+		if (-d $path) {
+			foreach my $module_path (glob "$path/*.pm") {
+				my $name = basename($module_path);
+				$name =~ s/\.pm$//;
+				next if exists $buildsystems{$name} or exists $genbuildsystems{$name};
+				my $system = create_buildsystem_instance($name, 1, %opts);
+				if ($system->IS_GENERATOR_BUILD_SYSTEM) {
+					$genbuildsystems{$name} = 1;
+					for my $target_name ($system->SUPPORTED_TARGET_BUILD_SYSTEMS) {
+						my $full_name = "${name}+${target_name}";
+						my $full_system = create_buildsystem_instance($name, 1, %opts,
+							'targetbuildsystem' => $target_name);
+						$buildsystems{$full_name} = $full_system;
+					}
+				} else {
+					$buildsystems{$name} = $system;
+				}
+			}
+		}
+	}
+
+	# Standard debhelper build systems first
+	foreach my $name (@BUILDSYSTEMS) {
+		error("standard debhelper build system '$name' could not be found/loaded")
+		    if not exists $buildsystems{$name};
+		push @buildsystems, $buildsystems{$name};
+		delete $buildsystems{$name};
+	}
+
+	foreach my $name (@THIRD_PARTY_BUILDSYSTEMS) {
+		next if not exists $buildsystems{$name};
+		my $inst = $buildsystems{$name};
+		$inst->{thirdparty} = 1;
+		push(@buildsystems, $inst);
+		delete($buildsystems{$name});
+	}
+
+	# The rest are 3rd party build systems
+	foreach my $name (sort(keys(%buildsystems))) {
+		my $inst = $buildsystems{$name};
+		$inst->{thirdparty} = 1;
+		push @buildsystems, $inst;
+	}
+
+	return @buildsystems;
+}
+
+sub buildsystems_init {
+	my %args=@_;
+
+	# Compat 10 defaults to --parallel by default
+	my $max_parallel = compat(9) ? 1 : -1;
+
+	# Available command line options
+	my %options = (
+	    "D=s" => \$opt_sourcedir,
+	    "sourcedir=s" => \$opt_sourcedir,
+	    "sourcedirectory=s" => \$opt_sourcedir,
+
+	    "B:s" => \$opt_builddir,
+	    "builddir:s" => \$opt_builddir,
+	    "builddirectory:s" => \$opt_builddir,
+
+	    "S=s" => \$opt_buildsys,
+	    "buildsystem=s" => \$opt_buildsys,
+
+	    "l" => \$opt_list,
+	    "list" => \$opt_list,
+
+	    "parallel" => sub { $max_parallel = -1 },
+	    'no-parallel' => sub { $max_parallel = 1 },
+	    "max-parallel=i" => \$max_parallel,
+
+	    'reload-all-buildenv-variables' => sub {
+		Debian::Debhelper::Dh_Lib::reset_buildflags();
+	    },
+	);
+	if (compat(8)) {
+		# This option only works in compat 9+ where we actually set buildflags
+		$options{'reload-all-buildenv-variables'} = sub {
+			die("--reload-all-buildenv-variables only work reliably in compat 9+.\n");
+		};
+	}
+	$args{options}{$_} = $options{$_} foreach keys(%options);
+	Debian::Debhelper::Dh_Lib::init(%args);
+	Debian::Debhelper::Dh_Lib::setup_buildenv();
+	set_parallel($max_parallel);
+}
+
+sub set_parallel {
+	my $max=shift;
+
+	# Get number of processes from parallel=n option, limiting it
+	# with $max if needed
+	$opt_parallel=get_buildoption("parallel") || 1;
+
+	if ($max > 0 && $opt_parallel > $max) {
+		$opt_parallel = $max;
+	}
+}
+
+sub buildsystems_list {
+	my $step=shift;
+
+	my @buildsystems = load_all_buildsystems();
+	my %auto_selectable = map { $_ => 1 } @THIRD_PARTY_BUILDSYSTEMS;
+	my $auto = autoselect_buildsystem($step, grep { ! $_->{thirdparty} || $auto_selectable{$_->NAME} } @buildsystems);
+	my $specified_text;
+
+	if ($opt_buildsys) {
+		for my $inst (@buildsystems) {
+			my $full_name = $inst->NAME;
+			if ($full_name eq $opt_buildsys) {
+				$specified_text = $full_name;
+			} elsif ($inst->IS_GENERATOR_BUILD_SYSTEM and ref($inst)->NAME eq $opt_buildsys) {
+				my $default = $inst->DEFAULT_TARGET_BUILD_SYSTEM;
+				$specified_text = "${opt_buildsys}+${default} (default for ${opt_buildsys})";
+			}
+		}
+	}
+
+	# List build systems (including auto and specified status)
+	foreach my $inst (@buildsystems) {
+		printf("%-20s %s", $inst->NAME(), $inst->FULL_DESCRIPTION());
+		print " [3rd party]" if $inst->{thirdparty};
+		print "\n";
+	}
+	print "\n";
+	print "Auto-selected: ", $auto->NAME(), "\n" if defined $auto;
+	print "Specified: ", $specified_text, "\n" if defined $specified_text;
+	print "No system auto-selected or specified\n"
+		if ! defined $auto && ! defined $specified_text;
+}
+
+sub buildsystems_do {
+	my $step=shift;
+
+	if (!defined $step) {
+		$step = basename($0);
+		$step =~ s/^dh_auto_//;
+	}
+
+	if (grep(/^\Q$step\E$/, BUILD_STEPS) == 0) {
+		error("unrecognized build step: " . $step);
+	}
+
+	if ($opt_list) {
+		buildsystems_list($step);
+		exit 0;
+	}
+
+	my $buildsystem = load_buildsystem($opt_buildsys, $step);
+	if (defined $buildsystem) {
+		my ($xdg_runtime_dir, $err, $ref);
+		local $SIG{'INT'} = sub { $ref = 'INT'; die(\$ref); };
+		local $SIG{'TERM'} = sub { $ref = 'TERM'; die(\$ref); };
+		if ($step eq 'test' and not compat(12)) {
+			require File::Temp;
+			$xdg_runtime_dir = File::Temp->newdir('dh-xdg-rundir-XXXXXXXX',
+				TMPDIR  => 1,
+				CLEANUP => 1,
+			);
+			$ENV{'XDG_RUNTIME_DIR'} = $xdg_runtime_dir->dirname;
+		}
+		eval {
+			$buildsystem->pre_building_step($step);
+			$buildsystem->$step(@_, @{$dh{U_PARAMS}});
+			$buildsystem->post_building_step($step);
+		};
+		$err = $@;
+		doit('rm', '-fr', '--', $xdg_runtime_dir) if $xdg_runtime_dir;
+		if ($err) {
+			my $sig;
+			die($err) if $err ne \$ref;
+			$sig = $ref;
+			delete($SIG{$sig});
+			kill($sig => $$);
+		}
+	}
+	return 0;
+}
+
+1
diff --git a/lib/Debian/Debhelper/Dh_Getopt.pm b/lib/Debian/Debhelper/Dh_Getopt.pm
new file mode 100644
index 0000000..5486c41
--- /dev/null
+++ b/lib/Debian/Debhelper/Dh_Getopt.pm
@@ -0,0 +1,332 @@
+#!/usr/bin/perl
+#
+# Debhelper option processing library.
+#
+# Joey Hess GPL copyright 1998-2002
+
+package Debian::Debhelper::Dh_Getopt;
+use strict;
+use warnings;
+
+use Debian::Debhelper::Dh_Lib;
+use Getopt::Long;
+
+my (%exclude_package, %internal_excluded_package, %explicitly_requested_packages, %profile_enabled_packages,
+	$profile_excluded_pkg);
+
+sub showhelp {
+	my $prog=basename($0);
+	print "Usage: $prog [options]\n\n";
+	print "  $prog is a part of debhelper. See debhelper(7)\n";
+	print "  and $prog(1) for complete usage instructions.\n"; 
+	exit(1);
+}
+
+# Passed an option name and an option value, adds packages to the list
+# of packages. We need this so the list will be built up in the right
+# order.
+sub AddPackage { my($option,$value)=@_;
+	if ($option eq 'i' or $option eq 'indep') {
+		push @{$dh{DOPACKAGES}}, getpackages('indep');
+		$dh{DOINDEP}=1;
+	}
+	elsif ($option eq 'a' or $option eq 'arch' or
+	       $option eq 's' or $option eq 'same-arch') {
+		push @{$dh{DOPACKAGES}}, getpackages('arch');
+		$dh{DOARCH}=1;
+		if ($option eq 's' or $option eq 'same-arch') {
+			deprecated_functionality('-s/--same-arch is deprecated; please use -a/--arch instead',
+									 12,
+									 '-s/--same-arch has been removed; please use -a/--arch instead'
+			);
+		}
+	}
+	elsif ($option eq 'p' or $option eq 'package') {
+		assert_opt_is_known_package($value, '-p/--package');
+		%profile_enabled_packages = map { $_ => 1 } getpackages('both') if not %profile_enabled_packages;
+		$explicitly_requested_packages{$value} = 1;
+		# Silently ignore packages that are not enabled by the
+		# profile.
+		if (exists($profile_enabled_packages{$value})) {
+			push @{$dh{DOPACKAGES}}, $value;
+		} else {
+			$profile_excluded_pkg = 1;
+		}
+	}
+	else {
+		error("bad option $option - should never happen!\n");
+	}
+}
+
+# Sets a package as the debug package.
+sub SetDebugPackage { my($option,$value)=@_;
+	$dh{DEBUGPACKAGE} = $value;
+	# For backwards compatibility
+	$dh{DEBUGPACKAGES} = [$value];
+}
+
+# Add a package to a list of packages that should not be acted on.
+sub ExcludePackage {
+	my($option, $value)=@_;
+	assert_opt_is_known_package($value, '-N/--no-package');
+	$exclude_package{$value}=1;
+}
+
+# Add another item to the exclude list.
+sub AddExclude {
+	my($option,$value)=@_;
+	push @{$dh{EXCLUDE}},$value;
+}
+
+# This collects non-options values.
+sub NonOption {
+	push @{$dh{ARGV}}, @_;
+}
+
+sub getoptions {
+	my $array=shift;
+	my %params=@_;
+
+	if (! exists $params{bundling} || $params{bundling}) {
+		Getopt::Long::config("bundling");
+	}
+	Getopt::Long::config('no_ignore_case');
+	if ( ! -f 'debian/control' or ! compat(12, 1)) {
+		Getopt::Long::config('no_auto_abbrev');
+	}
+
+	my @test;
+	my %options=(	
+		"v" => \$dh{VERBOSE},
+		"verbose" => \$dh{VERBOSE},
+
+		"no-act" => \$dh{NO_ACT},
+	
+		"i" => \&AddPackage,
+		"indep" => \&AddPackage,
+	
+		"a" => \&AddPackage,
+		"arch" => \&AddPackage,
+	
+		"p=s" => \&AddPackage,
+		"package=s" => \&AddPackage,
+		
+		"N=s" => \&ExcludePackage,
+		"no-package=s" => \&ExcludePackage,
+	
+		"remaining-packages" => \$dh{EXCLUDE_LOGGED},
+	
+		"dbg-package=s" => \&SetDebugPackage,
+		
+		"s" => \&AddPackage,
+		"same-arch" => \&AddPackage,
+	
+		"n" => \$dh{NOSCRIPTS},
+		"noscripts" => \$dh{NOSCRIPTS},
+		"no-scripts" => \$dh{NOSCRIPTS},
+		"o" => \$dh{ONLYSCRIPTS},
+		"onlyscripts" => \$dh{ONLYSCRIPTS},
+		"only-scripts" => \$dh{ONLYSCRIPTS},
+
+		"X=s" => \&AddExclude,
+		"exclude=s" => \&AddExclude,
+		
+		"d" => \$dh{D_FLAG},
+	
+		"P=s" => \$dh{TMPDIR},
+		"tmpdir=s" => \$dh{TMPDIR},
+
+		"u=s", => \$dh{U_PARAMS},
+
+		"V:s", => \$dh{V_FLAG},
+
+		"A" => \$dh{PARAMS_ALL},
+		"all" => \$dh{PARAMS_ALL},
+	
+		"h|help" => \&showhelp,
+
+		"mainpackage=s" => \$dh{MAINPACKAGE},
+
+		"name=s" => \$dh{NAME},
+
+		"error-handler=s" => \$dh{ERROR_HANDLER},
+
+		"O=s" => sub { push @test, $_[1] },
+	      
+		(ref $params{options} ? %{$params{options}} : ()) ,
+
+		"<>" => \&NonOption,
+	);
+
+	if ($params{test}) {
+		foreach my $key (keys %options) {
+			$options{$key}=sub {};
+		}
+	}
+
+	my $oldwarn;
+	if ($params{test} || $params{ignore_unknown_options}) {
+		$oldwarn=$SIG{__WARN__};
+		$SIG{__WARN__}=sub {};
+	}
+	my $ret=Getopt::Long::GetOptionsFromArray($array, %options);
+	if ($params{test} || $params{ignore_unknown_options}) {
+		$SIG{__WARN__}=$oldwarn;
+	}
+
+	foreach my $opt (@test) {
+		# Try to parse an option, and skip it
+		# if it is not known.
+		if (getoptions([$opt], %params,
+				ignore_unknown_options => 0,
+				test => 1)) {
+			getoptions([$opt], %params);
+		}
+	}
+
+	return 1 if $params{ignore_unknown_options};
+	return $ret;
+}
+
+sub split_options_string {
+	my $str=shift;
+	$str=~s/^\s+//;
+	return split(/\s+/,$str);
+}
+
+# Parse options and set %dh values.
+sub parseopts {
+	my %params=@_;
+	
+	my @ARGV_extra;
+
+	# DH_INTERNAL_OPTIONS is used to pass additional options from
+	# dh through an override target to a command.
+	if (defined $ENV{DH_INTERNAL_OPTIONS}) {
+		@ARGV_extra=split(/\x1e/, $ENV{DH_INTERNAL_OPTIONS});
+		getoptions(\@ARGV_extra, %params);
+
+		# Avoid forcing acting on packages specified in
+		# DH_INTERNAL_OPTIONS. This way, -p can be specified
+		# at the command line to act on a specific package, but when
+		# nothing is specified, the excludes will cause the set of
+		# packages DH_INTERNAL_OPTIONS specifies to be acted on.
+		if (defined $dh{DOPACKAGES}) {
+			foreach my $package (getpackages()) {
+				if (! grep { $_ eq $package } @{$dh{DOPACKAGES}}) {
+					$exclude_package{$package} = 1;
+					$internal_excluded_package{$package} = 1;
+				}
+			}
+		}
+		delete $dh{DOPACKAGES};
+		delete $dh{DOINDEP};
+		delete $dh{DOARCH};
+	}
+	
+	# DH_OPTIONS can contain additional options to be parsed like @ARGV
+	if (defined $ENV{DH_OPTIONS}) {
+		@ARGV_extra=split_options_string($ENV{DH_OPTIONS});
+		my $ret=getoptions(\@ARGV_extra, %params);
+		if (!$ret) {
+			warning("ignored unknown options in DH_OPTIONS");
+		}
+	}
+
+	my $ret=getoptions(\@ARGV, %params);
+	if (!$ret) {
+		if (! compat(7)) {
+			error("unknown option or error during option parsing; aborting");
+		}
+	}
+
+	# Check to see if -V was specified. If so, but no parameters were
+	# passed, the variable will be defined but empty.
+	if (defined($dh{V_FLAG})) {
+		$dh{V_FLAG_SET}=1;
+	}
+	
+	# If we have not been given any packages to act on, assume they
+	# want us to act on them all. Note we have to do this before excluding
+	# packages out, below.
+	if (! defined $dh{DOPACKAGES} || ! @{$dh{DOPACKAGES}}) {
+		my $do_exit = 0;
+		if ($profile_excluded_pkg) {
+			if (! $dh{BLOCK_NOOP_WARNINGS}) {
+				warning('All requested packages have been excluded'
+					. ' (e.g. via a Build-Profile or due to architecture restrictions).');
+			}
+			$do_exit = 1;
+		}
+		if ($dh{DOINDEP} || $dh{DOARCH}) {
+			# User specified that all arch (in)dep package be
+			# built, and there are none of that type.
+			if (! $dh{BLOCK_NOOP_WARNINGS}) {
+				warning("You asked that all arch in(dep) packages be built, but there are none of that type.");
+			}
+			$do_exit = 1;
+		}
+		exit(0) if $do_exit;
+		push @{$dh{DOPACKAGES}},getpackages("both");
+	}
+
+	# Remove excluded packages from the list of packages to act on.
+	# Also unique the list, in case some options were specified that
+	# added a package to it twice.
+	my (@package_list, $package, %packages_seen);
+	foreach $package (@{$dh{DOPACKAGES}}) {
+		if (defined($dh{EXCLUDE_LOGGED}) &&
+		    grep { $_ eq $Debian::Debhelper::Dh_Lib::TOOL_NAME } load_log($package)) {
+			$exclude_package{$package}=1;
+		}
+		if (! $exclude_package{$package}) {
+			if (! exists $packages_seen{$package}) {
+				$packages_seen{$package}=1;
+				push @package_list, $package;	
+			}
+		}
+	}
+	@{$dh{DOPACKAGES}}=@package_list;
+
+	if (! defined $dh{DOPACKAGES} || ! @{$dh{DOPACKAGES}}) {
+		if (! $dh{BLOCK_NOOP_WARNINGS}) {
+			my %archs;
+			if (%explicitly_requested_packages) {
+				# Avoid sending a confusing error message when debhelper must exclude a package given via -p.
+				# This commonly happens due to Build-Profiles or/and when build only a subset of the packages
+				# (e.g. dpkg-buildpackage -A vs. -B vs. none of the options)
+				for my $pkg (sort(keys(%explicitly_requested_packages))) {
+					if (exists($internal_excluded_package{$pkg}) or not exists($profile_enabled_packages{$pkg})) {
+						delete($explicitly_requested_packages{$pkg});
+					}
+				}
+				if (not %explicitly_requested_packages) {
+					warning('All requested packages have been excluded'
+						. ' (e.g. via a Build-Profile or due to architecture restrictions).');
+					exit(0);
+				}
+			}
+			for my $pkg (getpackages()) {
+				$archs{package_declared_arch($pkg)} = 1;
+			}
+			warning("No packages to build. Possible architecture mismatch: " . hostarch() .
+				", want: " . join(" ", sort keys %archs));
+		}
+		exit(0);
+	}
+
+	if (defined $dh{U_PARAMS}) {
+		# Split the U_PARAMS up into an array.
+		my $u=$dh{U_PARAMS};
+		undef $dh{U_PARAMS};
+		push @{$dh{U_PARAMS}}, split(/\s+/,$u);
+	}
+
+	# Anything left in @ARGV is options that appeared after a --
+	# These options are added to the U_PARAMS array, while the
+	# non-option values we collected replace them in @ARGV;
+	push @{$dh{U_PARAMS}}, @ARGV, @ARGV_extra;
+	@ARGV=@{$dh{ARGV}} if exists $dh{ARGV};
+}
+
+1
diff --git a/lib/Debian/Debhelper/Dh_Lib.pm b/lib/Debian/Debhelper/Dh_Lib.pm
new file mode 100644
index 0000000..7cf59e0
--- /dev/null
+++ b/lib/Debian/Debhelper/Dh_Lib.pm
@@ -0,0 +1,3111 @@
+#!/usr/bin/perl
+#
+# Library functions for debhelper programs, perl version.
+#
+# Joey Hess, GPL copyright 1997-2008.
+
+package Debian::Debhelper::Dh_Lib;
+
+use v5.24;
+use warnings;
+use utf8;
+
+# Disable unicode_strings for now until a better solution for
+# Debian#971362 comes around.
+no feature 'unicode_strings';
+
+
+use constant {
+	# Lowest compat level supported
+	'MIN_COMPAT_LEVEL' => 7,
+	# Lowest compat level that does *not* cause deprecation
+	# warnings
+	'LOWEST_NON_DEPRECATED_COMPAT_LEVEL' => 10,
+	# Lowest compat level to generate "debhelper-compat (= X)"
+	# relations for.
+	'LOWEST_VIRTUAL_DEBHELPER_COMPAT_LEVEL' => 9,
+	# Highest compat level permitted
+	'MAX_COMPAT_LEVEL' => 15,
+	# Magic value for xargs
+	'XARGS_INSERT_PARAMS_HERE' => \'<INSERT-HERE>', #'# Hi emacs.
+	# Magic value for debhelper tools to request "current version"
+	'DH_BUILTIN_VERSION' => \'<DH_LIB_VERSION>', #'# Hi emacs.
+	# Default Package-Type / extension (must be aligned with dpkg)
+	'DEFAULT_PACKAGE_TYPE' => 'deb',
+};
+
+
+# The Makefile changes this if debhelper is installed in a PREFIX.
+my $prefix="/usr";
+# The Makefile changes this during install to match the actual version.
+use constant HIGHEST_STABLE_COMPAT_LEVEL => undef;
+
+# Locations we search for data files by default
+my @DATA_INC_PATH = (
+	"${prefix}/share/debhelper",
+);
+# Enable the use of DH_DATAFILES for testing purposes.
+unshift(@DATA_INC_PATH, split(':', $ENV{'DH_DATAFILES'})) if exists($ENV{'DH_DATAFILES'});
+
+use constant {
+	# Package-Type / extension for dbgsym packages
+	# TODO: Find a way to determine this automatically from the vendor
+	#  - blocked by Dpkg::Vendor having a rather high load time (for debhelper)
+	'DBGSYM_PACKAGE_TYPE' => DEFAULT_PACKAGE_TYPE,
+	# Lowest compat level supported that is not scheduled for removal.
+	# - Set to MIN_COMPAT_LEVEL when there are no pending compat removals.
+	'MIN_COMPAT_LEVEL_NOT_SCHEDULED_FOR_REMOVAL' => MIN_COMPAT_LEVEL,
+};
+
+
+# Internal constants used to define limits in variable expansions.
+use constant {
+	# How many expansions are permitted in total.
+	_VAR_SUBST_EXPANSION_COUNT_LIMIT              => 50,
+	# When recursion is enabled, how many times will we expand a pattern
+	# on the same position in the string.
+	_VAR_SUBST_SAME_POSITION_RECURSION_LIMIT      => 20,
+	# Expansions are always allowed to grow up to this length regardless
+	# of original input size (provided it does not trip another limit)
+	_VAR_SUBST_EXPANSION_MIN_SUPPORTED_SIZE_LIMIT => 4096,
+	# Factor input is allowed to grow before it triggers an error
+	# (_VAR_SUBST_EXPANSION_MIN_SUPPORTED_SIZE_LIMIT overrules this for a
+	#  given input if the max size limit computed with this factor is less
+	#  than _VAR_SUBST_EXPANSION_MIN_SUPPORTED_SIZE_LIMIT)
+	_VAR_SUBST_EXPANSION_DYNAMIC_EXPANSION_FACTOR_LIMIT => 3,
+};
+
+
+use Errno qw(ENOENT EXDEV);
+use Exporter qw(import);
+use File::Glob qw(bsd_glob GLOB_CSH GLOB_NOMAGIC GLOB_TILDE);
+our (@EXPORT, %dh);
+@EXPORT = (
+	# debhelper basis functionality
+qw(
+	init
+	%dh
+	compat
+),
+	# External command tooling API
+qw(
+	doit
+	doit_noerror
+	qx_cmd
+	xargs
+	XARGS_INSERT_PARAMS_HERE
+	print_and_doit
+	print_and_doit_noerror
+
+	complex_doit
+	escape_shell
+),
+	# Logging/messaging/error handling
+qw(
+	error
+	error_exitcode
+	warning
+	verbose_print
+	nonquiet_print
+),
+	# Package related actions
+qw(
+	getpackages
+	sourcepackage
+	tmpdir
+	dbgsym_tmpdir
+	default_sourcedir
+	pkgfile
+	pkgext
+	pkgfilename
+	package_is_arch_all
+	package_binary_arch
+	package_declared_arch
+	package_multiarch
+	package_section
+	package_arch
+	package_type
+	process_pkg
+	compute_doc_main_package
+	isnative
+	is_udeb
+),
+	# File/path related actions
+qw(
+	basename
+	dirname
+	mkdirs
+	install_file
+	install_prog
+	install_lib
+	install_dir
+	install_dh_config_file
+	make_symlink
+	make_symlink_raw_target
+	rename_path
+	find_hardlinks
+	rm_files
+	excludefile
+	is_so_or_exec_elf_file
+	is_empty_dir
+	reset_perm_and_owner
+	log_installed_files
+
+	filearray
+	filedoublearray
+	glob_expand
+	glob_expand_error_handler_reject
+	glob_expand_error_handler_warn_and_discard
+	glob_expand_error_handler_silently_ignore
+	glob_expand_error_handler_reject_nomagic_warn_discard
+),
+	# Generate triggers, substvars, maintscripts, build-time temporary files
+qw(
+	autoscript
+	autotrigger
+	addsubstvar
+	delsubstvar
+
+	generated_file
+	restore_file_on_clean
+),
+	# Split tasks among different cores
+qw(
+	on_pkgs_in_parallel
+	on_items_in_parallel
+	on_selected_pkgs_in_parallel
+),
+	# R³ framework
+qw(
+	should_use_root
+	gain_root_cmd
+
+),
+	# Architecture, cross-tooling, build options and profiles
+qw(
+	dpkg_architecture_value
+	hostarch
+	cross_command
+	is_cross_compiling
+	is_build_profile_active
+	get_buildoption
+	perl_cross_incdir
+),
+	# Other
+qw(
+	open_gz
+	get_source_date_epoch
+	get_non_binnmu_date_epoch
+	deprecated_functionality
+),
+	# Special-case functionality (e.g. tool specific), debhelper(-core) functionality and deprecated functions
+qw(
+	inhibit_log
+	load_log
+	write_log
+	commit_override_log
+	debhelper_script_subst
+	debhelper_script_per_package_subst
+	is_make_jobserver_unavailable
+	clean_jobserver_makeflags
+	set_buildflags
+	DEFAULT_PACKAGE_TYPE
+	DBGSYM_PACKAGE_TYPE
+	DH_BUILTIN_VERSION
+	is_known_package
+	assert_opt_is_known_package
+	restore_all_files
+
+	buildarch
+));
+
+my $MAX_PROCS = get_buildoption("parallel") || 1;
+my $DH_TOOL_VERSION;
+
+our $PKGNAME_REGEX = qr/[a-z0-9][-+\.a-z0-9]+/o;
+our $PKGVERSION_REGEX = qr/
+                 (?: \d+ : )?                # Optional epoch
+                 [0-9][0-9A-Za-z.+:~]*       # Upstream version (with no hyphens)
+                 (?: - [0-9A-Za-z.+:~]+ )*   # Optional debian revision (+ upstreams versions with hyphens)
+                          /xoa;
+our $MAINTSCRIPT_TOKEN_REGEX = qr/[A-Za-z0-9_.+]+/o;
+our $TOOL_NAME = basename($0);
+
+# From Policy 5.1:
+#
+#  The field name is composed of US-ASCII characters excluding control
+#  characters, space, and colon (i.e., characters in the ranges U+0021
+#  (!) through U+0039 (9), and U+003B (;) through U+007E (~),
+#  inclusive). Field names must not begin with the comment character
+#  (U+0023 #), nor with the hyphen character (U+002D -).
+our $DEB822_FIELD_REGEX = qr/
+	    [\x21\x22\x24-\x2C\x2F-\x39\x3B-\x7F]  # First character
+	    [\x21-\x39\x3B-\x7F]*                  # Subsequent characters (if any)
+    /xoa;
+
+our $PARSE_DH_SEQUENCE_INFO = 0;
+
+# We need logging in compat 9 or in override/hook targets (for --remaining-packages to work)
+# - This option is a global toggle to disable logs for special commands (e.g. dh or dh_clean)
+# It is initialized during "init".  This implies that commands that never calls init are
+# not dh_* commands or do not need the log
+my $write_log = undef;
+
+sub init {
+	my %params=@_;
+
+	if ($params{internal_parse_dh_sequence_info}) {
+		$PARSE_DH_SEQUENCE_INFO = 1;
+	}
+
+	# Check if we can by-pass the expensive Getopt::Long by optimising for the
+	# common case of "-a" or "-i"
+	if (scalar(@ARGV) == 1 && ($ARGV[0] eq '-a' || $ARGV[0] eq '-i') &&
+		! (defined $ENV{DH_OPTIONS} && length $ENV{DH_OPTIONS}) &&
+		! (defined $ENV{DH_INTERNAL_OPTIONS} && length $ENV{DH_INTERNAL_OPTIONS})) {
+
+		# Single -i or -a as dh does it.
+		if ($ARGV[0] eq '-i') {
+			push(@{$dh{DOPACKAGES}}, getpackages('indep'));
+			$dh{DOINDEP} = 1;
+		} else {
+			push(@{$dh{DOPACKAGES}}, getpackages('arch'));
+			$dh{DOARCH} = 1;
+		}
+
+		if (! @{$dh{DOPACKAGES}}) {
+			if (! $dh{BLOCK_NOOP_WARNINGS}) {
+				warning("You asked that all arch in(dep) packages be built, but there are none of that type.");
+			}
+			exit(0);
+		}
+		# Clear @ARGV so we do not hit the expensive case below
+		@ARGV = ();
+	}
+
+	# Check to see if an option line starts with a dash,
+	# or DH_OPTIONS is set.
+	# If so, we need to pass this off to the resource intensive 
+	# Getopt::Long, which I'd prefer to avoid loading at all if possible.
+	if ((defined $ENV{DH_OPTIONS} && length $ENV{DH_OPTIONS}) ||
+ 	    (defined $ENV{DH_INTERNAL_OPTIONS} && length $ENV{DH_INTERNAL_OPTIONS}) ||
+	    grep /^-/, @ARGV) {
+		eval { require Debian::Debhelper::Dh_Getopt; };
+		error($@) if $@;
+		Debian::Debhelper::Dh_Getopt::parseopts(%params);
+	}
+
+	# Another way to set excludes.
+	if (exists $ENV{DH_ALWAYS_EXCLUDE} && length $ENV{DH_ALWAYS_EXCLUDE}) {
+		push @{$dh{EXCLUDE}}, split(":", $ENV{DH_ALWAYS_EXCLUDE});
+	}
+	
+	# Generate EXCLUDE_FIND.
+	if ($dh{EXCLUDE}) {
+		$dh{EXCLUDE_FIND}='';
+		foreach (@{$dh{EXCLUDE}}) {
+			my $x=$_;
+			$x=escape_shell($x);
+			$x=~s/\./\\\\./g;
+			$dh{EXCLUDE_FIND}.="-regex .\\*$x.\\* -or ";
+		}
+		$dh{EXCLUDE_FIND}=~s/ -or $//;
+	}
+	
+	# Check to see if DH_VERBOSE environment variable was set, if so,
+	# make sure verbose is on. Otherwise, check DH_QUIET.
+	if (defined $ENV{DH_VERBOSE} && $ENV{DH_VERBOSE} ne "") {
+		$dh{VERBOSE}=1;
+	} elsif (defined $ENV{DH_QUIET} && $ENV{DH_QUIET} ne "" || get_buildoption("terse")) {
+		$dh{QUIET}=1;
+	}
+
+	# Check to see if DH_NO_ACT environment variable was set, if so, 
+	# make sure no act mode is on.
+	if (defined $ENV{DH_NO_ACT} && $ENV{DH_NO_ACT} ne "") {
+		$dh{NO_ACT}=1;
+	}
+
+	# Get the name of the main binary package (first one listed in
+	# debian/control). Only if the main package was not set on the
+	# command line.
+	if (! exists $dh{MAINPACKAGE} || ! defined $dh{MAINPACKAGE}) {
+		my @allpackages=getpackages();
+		$dh{MAINPACKAGE}=$allpackages[0];
+	}
+
+	# Check if packages to build have been specified, if not, fall back to
+	# the default, building all relevant packages.
+	if (! defined $dh{DOPACKAGES} || ! @{$dh{DOPACKAGES}}) {
+		push @{$dh{DOPACKAGES}}, getpackages('both');
+	}
+
+	# Check to see if -P was specified. If so, we can only act on a single
+	# package.
+	if ($dh{TMPDIR} && $#{$dh{DOPACKAGES}} > 0) {
+		error("-P was specified, but multiple packages would be acted on (".join(",",@{$dh{DOPACKAGES}}).").");
+	}
+
+	# Figure out which package is the first one we were instructed to build.
+	# This package gets special treatement: files and directories specified on
+	# the command line may affect it.
+	$dh{FIRSTPACKAGE}=${$dh{DOPACKAGES}}[0];
+
+	# If no error handling function was specified, just propagate
+	# errors out.
+	if (! exists $dh{ERROR_HANDLER} || ! defined $dh{ERROR_HANDLER}) {
+		$dh{ERROR_HANDLER}='exit 1';
+	}
+
+	$dh{U_PARAMS} //= [];
+
+	if ($params{'inhibit_log'}) {
+		$write_log = 0;
+	} else {
+		# Only initialize if unset (i.e. avoid overriding an early call
+		# to inhibit_log()
+		$write_log //= 1;
+	}
+}
+
+# Ensure the log is written if requested but only if the command was
+# successful.
+sub END {
+	return if $? != 0 or not $write_log;
+	# If there is no 'debian/control', then we are not being run from
+	# a package directory and then the write_log will not do what we
+	# expect.
+	return if not -f 'debian/control';
+	if (compat(9, 1) || $ENV{DH_INTERNAL_OVERRIDE}) {
+		write_log($TOOL_NAME, @{$dh{DOPACKAGES}});
+	}
+}
+
+sub logfile {
+	my $package=shift;
+	my $ext=pkgext($package);
+	return "debian/${ext}debhelper.log"
+}
+
+sub load_log {
+	my ($package, $db)=@_;
+
+	my @log;
+	open(LOG, "<", logfile($package)) || return;
+	while (<LOG>) {
+		chomp;
+		my $command = $_;
+		push @log, $command;
+		$db->{$package}{$command}=1 if defined $db;
+	}
+	close LOG;
+	return @log;
+}
+
+sub write_log {
+	my $cmd=shift;
+	my @packages=@_;
+
+	return if $dh{NO_ACT};
+
+	foreach my $package (@packages) {
+		my $log = logfile($package);
+		open(LOG, ">>", $log) || error("failed to write to ${log}: $!");
+		print LOG $cmd."\n";
+		close LOG;
+	}
+}
+
+sub commit_override_log {
+	my @packages=@_;
+
+	return if $dh{NO_ACT};
+
+	foreach my $package (@packages) {
+		my @log = load_log($package);
+		my $log = logfile($package);
+		open(LOG, ">", $log) || error("failed to write to ${log}: $!");
+		print LOG $_."\n" foreach @log;
+		close LOG;
+	}
+}
+
+sub inhibit_log {
+	$write_log=0;
+}
+
+# Pass it an array containing the arguments of a shell command like would
+# be run by exec(). It turns that into a line like you might enter at the
+# shell, escaping metacharacters and quoting arguments that contain spaces.
+sub escape_shell {
+	my @args=@_;
+	my @ret;
+	foreach my $word (@args) {
+		if ($word=~/\s/) {
+			# Escape only a few things since it will be quoted.
+			# Note we use double quotes because you cannot
+			# escape ' in single quotes, while " can be escaped
+			# in double.
+			# This does make -V"foo bar" turn into "-Vfoo bar",
+			# but that will be parsed identically by the shell
+			# anyway..
+			$word=~s/([\n`\$"\\])/\\$1/g;
+			push @ret, "\"$word\"";
+		}
+		else {
+			# This list is from _Unix in a Nutshell_. (except '#')
+			$word=~s/([\s!"\$()*+#;<>?@\[\]\\`|~])/\\$1/g;
+			push @ret,$word;
+		}
+	}
+	return join(' ', @ret);
+}
+
+# Run a command, and display the command to stdout if verbose mode is on.
+# Throws error if command exits nonzero.
+#
+# All commands that modify files in $TMP should be run via this
+# function.
+#
+# Note that this cannot handle complex commands, especially anything
+# involving redirection. Use complex_doit instead.
+sub doit {
+	doit_noerror(@_) || error_exitcode(_format_cmdline(@_));
+}
+
+sub doit_noerror {
+	verbose_print(_format_cmdline(@_)) if $dh{VERBOSE};
+
+	goto \&_doit;
+}
+
+sub print_and_doit {
+	print_and_doit_noerror(@_) || error_exitcode(_format_cmdline(@_));
+}
+
+sub print_and_doit_noerror {
+	nonquiet_print(_format_cmdline(@_));
+
+	goto \&_doit;
+}
+
+sub _post_fork_setup_and_exec {
+	my ($close_stdin, $options, @cmd) = @_;
+	if (defined($options)) {
+		if (defined(my $dir = $options->{chdir})) {
+			if ($dir ne '.') {
+				chdir($dir) or error("chdir(\"${dir}\") failed: $!");
+			}
+		}
+		if ($close_stdin) {
+			open(STDIN, '<', '/dev/null') or error("redirect STDIN failed: $!");
+		}
+		if (defined(my $output = $options->{stdout})) {
+			open(STDOUT, '>', $output) or error("redirect STDOUT failed: $!");
+		}
+		if (defined(my $update_env = $options->{update_env})) {
+			while (my ($k, $v) = each(%{$update_env})) {
+				if (defined($v)) {
+					$ENV{$k} = $v;
+				} else {
+					delete($ENV{$k});
+				}
+			}
+		}
+	}
+	# Force execvp call to avoid shell.  Apparently, even exec can
+	# involve a shell if you don't do this.
+	exec { $cmd[0] } @cmd or error('exec (for cmd: ' . escape_shell(@cmd) . ") failed: $!");
+}
+
+sub _doit {
+	my (@cmd) = @_;
+	my $options = ref($cmd[0]) ? shift(@cmd) : undef;
+	# In compat <= 11, we warn, in compat 12 we assume people know what they are doing.
+	if (not defined($options) and @cmd == 1 and compat(12) and $cmd[0] =~ m/[\s<&>|;]/) {
+		deprecated_functionality('doit() + doit_*() calls will no longer spawn a shell in compat 12 for single string arguments (please use complex_doit instead)',
+								 12);
+		return 1 if $dh{NO_ACT};
+		return system(@cmd) == 0;
+	}
+	return 1 if $dh{NO_ACT};
+	my $pid = fork() // error("fork(): $!");
+	if (not $pid) {
+		_post_fork_setup_and_exec(1, $options, @cmd) // error("Assertion error: sub should not return!");
+	}
+	return waitpid($pid, 0) == $pid && $? == 0;
+}
+
+sub _format_cmdline {
+	my (@cmd) = @_;
+	my $options = ref($cmd[0]) ? shift(@cmd) : {};
+	my $cmd_line = escape_shell(@cmd);
+	if (defined(my $update_env = $options->{update_env})) {
+		my $need_env = 0;
+		my @params;
+		for my $key (sort(keys(%{$update_env}))) {
+			my $value = $update_env->{$key};
+			if (defined($value)) {
+				my $quoted_key = escape_shell($key);
+				push(@params, join('=', $quoted_key, escape_shell($value)));
+				# shell does not like: "FU BAR"=1 cmd
+				# if the ENV key has weird symbols, the best bet is to use env
+				$need_env = 1 if $quoted_key ne $key;
+			} else {
+				$need_env = 1;
+				push(@params, escape_shell("--unset=${key}"));
+			}
+		}
+		unshift(@params, 'env', '--') if $need_env;
+		$cmd_line = join(' ', @params, $cmd_line);
+	}
+	if (defined(my $dir = $options->{chdir})) {
+		$cmd_line = join(' ', 'cd', escape_shell($dir), '&&', $cmd_line) if $dir ne '.';
+	}
+	if (defined(my $output = $options->{stdout})) {
+		$cmd_line .= ' > ' . escape_shell($output);
+	}
+	return $cmd_line;
+}
+
+sub qx_cmd {
+	my (@cmd) = @_;
+	my $options = ref($cmd[0]) ? shift(@cmd) : undef;
+	my ($output, @output);
+	my $pid = open(my $fd, '-|') // error('fork (for cmd: ' . escape_shell(@cmd) . ") failed: $!");
+	if ($pid == 0) {
+		_post_fork_setup_and_exec(0, $options, @cmd) // error("Assertion error: sub should not return!");
+	}
+	if (wantarray) {
+		@output = <$fd>;
+	} else {
+		local $/ = undef;
+		$output = <$fd>;
+	}
+	if (not close($fd)) {
+		error("close pipe failed: $!") if $!;
+		error_exitcode(escape_shell(@cmd));
+	}
+	return @output if wantarray;
+	return $output;
+}
+
+# Run a command and display the command to stdout if verbose mode is on.
+# Use doit() if you can, instead of this function, because this function
+# forks a shell. However, this function can handle more complicated stuff
+# like redirection.
+sub complex_doit {
+	verbose_print(join(" ",@_));
+	
+	if (! $dh{NO_ACT}) {
+		# The join makes system get a scalar so it forks off a shell.
+		system(join(" ", @_)) == 0 || error_exitcode(join(" ", @_))
+	}			
+}
+
+
+sub error_exitcode {
+	my $command=shift;
+	if ($? == -1) {
+		error("$command failed to execute: $!");
+	}
+	elsif ($? & 127) {
+		error("$command died with signal ".($? & 127));
+	}
+	elsif ($?) {
+		error("$command returned exit code ".($? >> 8));
+	}
+	else {
+		warning("This tool claimed that $command have failed, but it");
+		warning("appears to have returned 0.");
+		error("Probably a bug in this tool is hiding the actual problem.");
+	}
+}
+
+# Some shortcut functions for installing files and dirs to always
+# have the same owner and mode
+# install_file - installs a non-executable
+# install_prog - installs an executable
+# install_lib  - installs a shared library (some systems may need x-bit, others don't)
+# install_dir  - installs a directory
+{
+	my $_loaded = 0;
+	sub install_file {
+		unshift(@_, 0644);
+		goto \&_install_file_to_path;
+	}
+
+	sub install_prog {
+		unshift(@_, 0755);
+		goto \&_install_file_to_path;
+	}
+	sub install_lib {
+		unshift(@_, 0644);
+		goto \&_install_file_to_path;
+	}
+
+	sub _install_file_to_path {
+		my ($mode, $source, $dest) = @_;
+		if (not $_loaded) {
+			$_loaded++;
+			require File::Copy;
+		}
+		verbose_print(sprintf('install -p -m%04o %s', $mode, escape_shell($source, $dest)))
+			if $dh{VERBOSE};
+		return 1 if $dh{NO_ACT};
+		# "install -p -mXXXX foo bar" silently discards broken
+		# symlinks to install the file in place.  File::Copy does not,
+		# so emulate it manually.  (#868204)
+		if ( -l $dest and not -e $dest and not unlink($dest) and $! != ENOENT) {
+			error("unlink $dest failed: $!");
+		}
+		File::Copy::copy($source, $dest) or error("copy($source, $dest): $!");
+		chmod($mode, $dest) or error("chmod($mode, $dest): $!");
+		my (@stat) = stat($source);
+		error("stat($source): $!") if not @stat;
+		utime($stat[8], $stat[9], $dest)
+			or error(sprintf("utime(%d, %d, %s): $!", $stat[8] , $stat[9], $dest));
+		return 1;
+	}
+}
+
+
+sub _mkdirs {
+	my ($log, @dirs) = @_;
+	return if not @dirs;
+	if ($log && $dh{VERBOSE}) {
+		verbose_print(sprintf('install -m0755 -d %s', escape_shell(@dirs)));
+	}
+	return 1 if $dh{NO_ACT};
+	state $_loaded;
+	if (not $_loaded) {
+		$_loaded++;
+		require File::Path;
+	}
+	my %opts = (
+		# install -d uses 0755 (no umask), make_path uses 0777 (& umask) by default.
+		# Since we claim to run install -d, then ensure the mode is correct.
+		'chmod' => 0755,
+	);
+	eval {
+		File::Path::make_path(@dirs, \%opts);
+	};
+	if (my $err = "$@") {
+		$err =~ s/\s+at\s+\S+\s+line\s+\d+\.?\n//;
+		error($err);
+	}
+	return;
+}
+
+sub mkdirs {
+	my @to_create = grep { not -d $_ } @_;
+	return _mkdirs(0, @to_create);
+}
+
+sub install_dir {
+	my @dirs = @_;
+	return _mkdirs(1, @dirs);
+}
+
+sub rename_path {
+	my ($source, $dest) = @_;
+
+	if ($dh{VERBOSE}) {
+		my $files = escape_shell($source, $dest);
+		verbose_print("mv $files");
+	}
+	return 1 if $dh{NO_ACT};
+	if (not rename($source, $dest)) {
+		my $ok = 0;
+		if ($! == EXDEV) {
+			# Replay with a fork+exec to handle crossing two mount
+			# points (See #897569)
+			$ok = _doit('mv', $source, $dest);
+		}
+		if (not $ok) {
+			my $files = escape_shell($source, $dest);
+			error("mv $files: $!");
+		}
+	}
+	return 1;
+}
+
+sub reset_perm_and_owner {
+	my ($mode, @paths) = @_;
+	my $_mode;
+	my $use_root = should_use_root();
+	# Dark goat blood to tell 0755 from "0755"
+	if (length( do { no warnings "numeric"; $mode & "" } ) ) {
+		# 0755, leave it alone.
+		$_mode = $mode;
+	} else {
+		# "0755" -> convert to 0755
+		$_mode = oct($mode);
+	}
+	if ($dh{VERBOSE}) {
+		verbose_print(sprintf('chmod %#o -- %s', $_mode, escape_shell(@paths)));
+		verbose_print(sprintf('chown 0:0 -- %s', escape_shell(@paths))) if $use_root;
+	}
+	return if $dh{NO_ACT};
+	for my $path (@paths) {
+		chmod($_mode, $path) or error(sprintf('chmod(%#o, %s): %s', $mode, $path, $!));
+		if ($use_root) {
+			chown(0, 0, $path) or error("chown(0, 0, $path): $!");
+		}
+	}
+}
+
+# Run a command that may have a huge number of arguments, like xargs does.
+# Pass in a reference to an array containing the arguments, and then other
+# parameters that are the command and any parameters that should be passed to
+# it each time.
+sub xargs {
+	my ($args, @static_args) = @_;
+
+        # The kernel can accept command lines up to 20k worth of characters.
+	my $command_max=20000; # LINUX SPECIFIC!!
+			# (And obsolete; it's bigger now.)
+			# I could use POSIX::ARG_MAX, but that would be slow.
+
+	# Figure out length of static portion of command.
+	my $static_length=0;
+	my $subst_index = -1;
+	for my $i (0..$#static_args) {
+		my $arg = $static_args[$i];
+		if ($arg eq XARGS_INSERT_PARAMS_HERE) {
+			error("Only one insertion place supported in xargs, got command: @static_args") if $subst_index > -1;
+			$subst_index = $i;
+			next;
+		}
+		$static_length+=length($arg)+1;
+	}
+	
+	my @collect=();
+	my $length=$static_length;
+	foreach (@$args) {
+		if (length($_) + 1 + $static_length > $command_max) {
+			error("This command is greater than the maximum command size allowed by the kernel, and cannot be split up further. What on earth are you doing? \"@_ $_\"");
+		}
+		$length+=length($_) + 1;
+		if ($length < $command_max) {
+			push @collect, $_;
+		}
+		else {
+			if ($#collect > -1) {
+				if ($subst_index < 0) {
+					doit(@static_args, @collect);
+				} else {
+					my @cmd = @static_args;
+					splice(@cmd, $subst_index, 1, @collect);
+					doit(@cmd);
+				}
+			}
+			@collect=($_);
+			$length=$static_length + length($_) + 1;
+		}
+	}
+	if ($#collect > -1) {
+		if ($subst_index < 0) {
+			doit(@static_args, @collect);
+		} else {
+			my @cmd = @static_args;
+			splice(@cmd, $subst_index, 1, @collect);
+			doit(@cmd);
+		}
+	}
+}
+
+# Print something if the verbose flag is on.
+sub verbose_print {
+	my $message=shift;
+	
+	if ($dh{VERBOSE}) {
+		print "\t$message\n";
+	}
+}
+
+# Print something unless the quiet flag is on
+sub nonquiet_print {
+	my $message=shift;
+
+	if (!$dh{QUIET}) {
+		if (defined($message)) {
+			print "\t$message\n";
+		} else {
+			print "\n";
+		}
+	}
+}
+
+sub _color {
+	my ($msg, $color) = @_;
+	state $_use_color;
+	if (not defined($_use_color)) {
+		# This part is basically Dpkg::ErrorHandling::setup_color over again
+		# with some tweaks.
+		# (but the module uses Dpkg + Dpkg::Gettext, so it is very expensive
+		# to load)
+		my $mode = $ENV{'DH_COLORS'} // $ENV{'DPKG_COLORS'};
+		# Support NO_COLOR (https://no-color.org/)
+		$mode //= exists($ENV{'NO_COLOR'}) ? 'never' : 'auto';
+
+		if ($mode eq 'auto') {
+			$_use_color = 1 if -t *STDOUT or -t *STDERR;
+		} elsif ($mode eq 'always') {
+			$_use_color = 1;
+		} else {
+			$_use_color = 0;
+		}
+
+		eval {
+			require Term::ANSIColor if $_use_color;
+		};
+		if ($@) {
+			# In case of errors, skip colors.
+			$_use_color = 0;
+		}
+	}
+	if ($_use_color) {
+		local $ENV{'NO_COLOR'} = undef;
+		$msg = Term::ANSIColor::colored($msg, $color);
+	}
+	return $msg;
+}
+
+# Output an error message and die (can be caught).
+sub error {
+	my ($message) = @_;
+	# ensure the error code is well defined.
+	$! = 255;
+	die(_color($TOOL_NAME, 'bold') . ': ' . _color('error', 'bold red') . ": $message\n");
+}
+
+# Output a warning.
+sub warning {
+	my ($message) = @_;
+	$message //= '';
+
+	print STDERR _color($TOOL_NAME, 'bold') . ': ' . _color('warning', 'bold yellow') . ": $message\n";
+}
+
+# Returns the basename of the argument passed to it.
+sub basename {
+	my $fn=shift;
+
+	$fn=~s/\/$//g; # ignore trailing slashes
+	$fn=~s:^.*/(.*?)$:$1:;
+	return $fn;
+}
+
+# Returns the directory name of the argument passed to it.
+sub dirname {
+	my $fn=shift;
+	
+	$fn=~s/\/$//g; # ignore trailing slashes
+	$fn=~s:^(.*)/.*?$:$1:;
+	return $fn;
+}
+
+# Pass in a number, will return true iff the current compatibility level
+# is less than or equal to that number.
+my $compat_from_bd;
+{
+	my $check_pending_removals = get_buildoption('dherroron', '') eq 'obsolete-compat-levels' ? 1 : 0;
+	my $warned_compat = $ENV{DH_INTERNAL_TESTSUITE_SILENT_WARNINGS} ? 1 : 0;
+	my $declared_compat;
+	my $delared_compat_source;
+	my $c;
+
+	# Used mainly for testing
+	sub resetcompat {
+		undef $c;
+		undef $compat_from_bd;
+	}
+
+	sub _load_compat_info {
+		my ($nowarn) = @_;
+
+		getpackages() if not defined($compat_from_bd);
+
+		$c=1;
+		if (-e 'debian/compat') {
+			open(my $compat_in, '<', "debian/compat") || error "debian/compat: $!";
+			my $l=<$compat_in>;
+			close($compat_in);
+			if (! defined $l || ! length $l) {
+				error("debian/compat must contain a positive number (found an empty first line)");
+
+			}
+			else {
+				chomp $l;
+				my $new_compat = $l;
+				$new_compat =~ s/^\s*+//;
+				$new_compat =~ s/\s*+$//;
+				if ($new_compat !~ m/^\d+$/) {
+					error("debian/compat must contain a positive number (found: \"${new_compat}\")");
+				}
+				if (defined($compat_from_bd) and $compat_from_bd != -1) {
+					warning("Please specify the debhelper compat level exactly once.");
+					warning(" * debian/compat requests compat ${new_compat}.");
+					warning(" * debian/control requests compat ${compat_from_bd} via \"debhelper-compat (= ${compat_from_bd})\"");
+					warning();
+					warning("Hint: If you just added a build-dependency on debhelper-compat, then please remember to remove debian/compat");
+					warning();
+					error("debhelper compat level specified both in debian/compat and via build-dependency on debhelper-compat");
+				}
+				$c = $new_compat;
+			}
+			$delared_compat_source = 'debian/compat';
+		} elsif ($compat_from_bd != -1) {
+			$c = $compat_from_bd;
+			$delared_compat_source = "Build-Depends: debhelper-compat (= $c)";
+		} elsif (not $nowarn) {
+			error("Please specify the compatibility level in debian/compat or via Build-Depends: debhelper-compat (= X)");
+		}
+
+		$declared_compat = int($c);
+
+		if (defined $ENV{DH_COMPAT}) {
+			my $override = $ENV{DH_COMPAT};
+			error("The environment variable DH_COMPAT must be a positive integer")
+				if $override ne q{} and $override !~ m/^\d+$/;
+			$c=int($ENV{DH_COMPAT}) if $override ne q{};
+		}
+	}
+
+	sub get_compat_info {
+		if (not $c) {
+			_load_compat_info(1);
+		}
+		return ($c, $declared_compat, $delared_compat_source);
+	}
+
+	sub compat {
+		my ($num, $nowarn) = @_;
+
+		if (not $c) {
+			_load_compat_info($nowarn);
+		}
+
+		if (not $nowarn) {
+			if ($c < MIN_COMPAT_LEVEL) {
+				error("Compatibility levels before ${\MIN_COMPAT_LEVEL} are no longer supported (level $c requested)");
+			}
+
+			if ($check_pending_removals and $c < MIN_COMPAT_LEVEL_NOT_SCHEDULED_FOR_REMOVAL) {
+				my $v = MIN_COMPAT_LEVEL_NOT_SCHEDULED_FOR_REMOVAL;
+				error("Compatibility levels before ${v} are scheduled for removal and DH_COMPAT_ERROR_ON_PENDING_REMOVAL was set (level $c requested)");
+			}
+
+			if ($c < LOWEST_NON_DEPRECATED_COMPAT_LEVEL && ! $warned_compat) {
+				warning("Compatibility levels before ${\LOWEST_NON_DEPRECATED_COMPAT_LEVEL} are deprecated (level $c in use)");
+				$warned_compat=1;
+			}
+	
+			if ($c > MAX_COMPAT_LEVEL) {
+				error("Sorry, but ${\MAX_COMPAT_LEVEL} is the highest compatibility level supported by this debhelper.");
+			}
+		}
+
+		return ($c <= $num);
+	}
+}
+
+# Pass it a name of a binary package, it returns the name of the tmp dir to
+# use, for that package.
+sub tmpdir {
+	my $package=shift;
+
+	if ($dh{TMPDIR}) {
+		return $dh{TMPDIR};
+	}
+	else {
+		return "debian/$package";
+	}
+}
+
+# Pass it a name of a binary package, it returns the name of the staging dir to
+# use, for that package.  (Usually debian/tmp)
+sub default_sourcedir {
+	my ($package) = @_;
+
+	return 'debian/tmp';
+}
+
+# Pass this the name of a binary package, and the name of the file wanted
+# for the package, and it will return the actual existing filename to use.
+#
+# It tries several filenames:
+#   * debian/package.filename.hostarch
+#   * debian/package.filename.hostos
+#   * debian/package.filename
+#   * debian/filename (if the package is the main package)
+# If --name was specified then the files
+# must have the name after the package name:
+#   * debian/package.name.filename.hostarch
+#   * debian/package.name.filename.hostos
+#   * debian/package.name.filename
+#   * debian/name.filename (if the package is the main package)
+
+{
+	my %_check_expensive;
+
+	sub pkgfile {
+		my ($package, $filename) = @_;
+		my (@try, $check_expensive);
+
+		if (not exists($_check_expensive{$filename})) {
+			my @f = grep {
+				!/\.debhelper$/
+			} bsd_glob("debian/*.$filename.*", GLOB_CSH & ~(GLOB_NOMAGIC|GLOB_TILDE));
+			if (not @f) {
+				$check_expensive = 0;
+			} else {
+				$check_expensive = 1;
+			}
+			$_check_expensive{$filename} = $check_expensive;
+		} else {
+			$check_expensive = $_check_expensive{$filename};
+		}
+
+		# Rewrite $filename after the check_expensive globbing above
+		# as $dh{NAME} is used as a prefix (so the glob above will
+		# cover it).
+		#
+		# In practise, it should not matter as NAME is ether set
+		# globally or not.  But if someone is being "clever" then the
+		# cache is reusable and for the general/normal case, it has no
+		# adverse effects.
+		if (defined $dh{NAME}) {
+			$filename="$dh{NAME}.$filename";
+		}
+
+		if (ref($package) eq 'ARRAY') {
+			# !!NOT A PART OF THE PUBLIC API!!
+			# Bulk test used by dh to speed up the can_skip check.   It
+			# is NOT useful for finding the most precise pkgfile.
+			push(@try, "debian/$filename");
+			for my $pkg (@{$package}) {
+				push(@try, "debian/${pkg}.${filename}");
+				if ($check_expensive) {
+					my $cross_type = uc(package_cross_type($pkg));
+					push(@try,
+						 "debian/${pkg}.${filename}.".dpkg_architecture_value("DEB_${cross_type}_ARCH"),
+						 "debian/${pkg}.${filename}.".dpkg_architecture_value("DEB_${cross_type}_ARCH_OS"),
+					);
+				}
+			}
+		} else {
+			# Avoid checking for hostarch+hostos unless we have reason
+			# to believe that they exist.
+			if ($check_expensive) {
+				my $cross_type = uc(package_cross_type($package));
+				push(@try,
+					 "debian/${package}.${filename}.".dpkg_architecture_value("DEB_${cross_type}_ARCH"),
+					 "debian/${package}.${filename}.".dpkg_architecture_value("DEB_${cross_type}_ARCH_OS"),
+					);
+			}
+			push(@try, "debian/$package.$filename");
+			if ($package eq $dh{MAINPACKAGE}) {
+				push @try, "debian/$filename";
+			}
+		}
+		foreach my $file (@try) {
+			return $file if -f $file;
+		}
+
+		return "";
+	}
+
+	# Used by dh to ditch some caches that makes assumptions about
+	# dh_-tools can do, which does not hold for override targets.
+	sub dh_clear_unsafe_cache {
+		%_check_expensive = ();
+	}
+}
+
+# Pass it a name of a binary package, it returns the name to prefix to files
+# in debian/ for this package.
+sub pkgext {
+	my ($package) = @_;
+	return "$package.";
+}
+
+# Pass it the name of a binary package, it returns the name to install
+# files by in eg, etc. Normally this is the same, but --name can override
+# it.
+sub pkgfilename {
+	my $package=shift;
+
+	if (defined $dh{NAME}) {
+		return $dh{NAME};
+	}
+	return $package;
+}
+
+# Returns 1 if the package is a native debian package, null otherwise.
+# As a side effect, sets $dh{VERSION} to the version of this package.
+sub isnative {
+	my ($package) = @_;
+	my $cache_key = $package;
+
+	state (%isnative_cache, %pkg_version);
+
+	if (exists($isnative_cache{$cache_key})) {
+		$dh{VERSION} = $pkg_version{$cache_key};
+		return $isnative_cache{$cache_key};
+	}
+
+	# Make sure we look at the correct changelog.
+	my $isnative_changelog = pkgfile($package,"changelog");
+	if (! $isnative_changelog) {
+		$isnative_changelog = "debian/changelog";
+		$cache_key = '_source';
+		# check if we looked up the default changelog
+		if (exists($isnative_cache{$cache_key})) {
+			$dh{VERSION} = $pkg_version{$cache_key};
+			return $isnative_cache{$cache_key};
+		}
+	}
+
+	if (not %isnative_cache) {
+		require Dpkg::Changelog::Parse;
+	}
+
+	my $res = Dpkg::Changelog::Parse::changelog_parse(
+		file => $isnative_changelog,
+		compression => 0,
+	);
+	if (not defined($res)) {
+		error("No changelog entries for $package!? (changelog file: ${isnative_changelog})");
+	}
+	my $version = $res->{'Version'};
+	# Do we have a valid version?
+	if (not defined($version) or not $version->is_valid) {
+		error("changelog parse failure; invalid or missing version");
+	}
+	# Get and cache the package version.
+	$dh{VERSION} = $pkg_version{$cache_key} = $version->as_string;
+
+	# Is this a native Debian package?
+	if (index($dh{VERSION}, '-') > -1) {
+		return $isnative_cache{$cache_key} = 0;
+	} else {
+		return $isnative_cache{$cache_key} = 1;
+	}
+}
+
+sub _tool_version {
+	return $DH_TOOL_VERSION if defined($DH_TOOL_VERSION);
+	if (defined($main::VERSION)) {
+		$DH_TOOL_VERSION = $main::VERSION;
+	}
+	if (defined($DH_TOOL_VERSION) and $DH_TOOL_VERSION eq DH_BUILTIN_VERSION) {
+		my $version = "UNRELEASED-${\MAX_COMPAT_LEVEL}";
+		eval {
+			require Debian::Debhelper::Dh_Version;
+			$version = $Debian::Debhelper::Dh_Version::version;
+		};
+		$DH_TOOL_VERSION = $version;
+	} else {
+		$DH_TOOL_VERSION //= 'UNDECLARED';
+	}
+	return $DH_TOOL_VERSION;
+}
+
+# Automatically add a shell script snippet to a debian script.
+# Only works if the script has #DEBHELPER# in it.
+#
+# Parameters:
+# 1: package
+# 2: script to add to
+# 3: filename of snippet
+# 4: either text: shell-quoted sed to run on the snippet. Ie, 's/#PACKAGE#/$PACKAGE/'
+#    or a sub to run on each line of the snippet. Ie sub { s/#PACKAGE#/$PACKAGE/ }
+#    or a hashref with keys being variables and values being their replacement.  Ie. { PACKAGE => $PACKAGE }
+# 5: Internal usage only
+sub autoscript {
+	my ($package, $script, $filename, $sed, $extra_options) = @_;
+
+	my $tool_version = _tool_version();
+	# This is the file we will modify.
+	my $outfile="debian/".pkgext($package)."$script.debhelper";
+	if ($extra_options && exists($extra_options->{'snippet-order'})) {
+		my $order = $extra_options->{'snippet-order'};
+		error("Internal error - snippet order set to unknown value: \"${order}\"")
+			if $order ne 'service';
+		$outfile = generated_file($package, "${script}.${order}");
+	}
+
+	# Figure out what shell script snippet to use.
+	my $infile;
+	if (defined($ENV{DH_AUTOSCRIPTDIR}) && 
+	    -e "$ENV{DH_AUTOSCRIPTDIR}/$filename") {
+		$infile="$ENV{DH_AUTOSCRIPTDIR}/$filename";
+	}
+	else {
+		for my $dir (@DATA_INC_PATH) {
+			my $path = "${dir}/autoscripts/${filename}";
+			if (-e $path) {
+				$infile = $path;
+				last;
+			}
+		}
+		if (not defined($infile)) {
+			my @dirs = map { "$_/autoscripts" } @DATA_INC_PATH;
+			unshift(@dirs, $ENV{DH_AUTOSCRIPTDIR}) if exists($ENV{DH_AUTOSCRIPTDIR});
+			error("Could not find autoscript $filename (search path: " . join(':', @dirs) . ')');
+		}
+	}
+
+	if (-e $outfile && ($script eq 'postrm' || $script eq 'prerm')) {
+		# Add fragments to top so they run in reverse order when removing.
+		if (not defined($sed) or ref($sed)) {
+			verbose_print("[META] Prepend autosnippet \"$filename\" to $script [${outfile}.new]");
+			if (not $dh{NO_ACT}) {
+				open(my $out_fd, '>', "${outfile}.new") or error("open(${outfile}.new): $!");
+				print {$out_fd} '# Automatically added by ' . $TOOL_NAME . "/${tool_version}\n";
+				autoscript_sed($sed, $infile, undef, $out_fd);
+				print {$out_fd} "# End automatically added section\n";
+				open(my $in_fd, '<', $outfile) or error("open($outfile): $!");
+				while (my $line = <$in_fd>) {
+					print {$out_fd} $line;
+				}
+				close($in_fd);
+				close($out_fd) or error("close(${outfile}.new): $!");
+			}
+		} else {
+			complex_doit("echo \"# Automatically added by ".$TOOL_NAME."/${tool_version}\"> $outfile.new");
+			autoscript_sed($sed, $infile, "$outfile.new");
+			complex_doit("echo '# End automatically added section' >> $outfile.new");
+			complex_doit("cat $outfile >> $outfile.new");
+		}
+		rename_path("${outfile}.new", $outfile);
+	} elsif (not defined($sed) or ref($sed)) {
+		verbose_print("[META] Append autosnippet \"$filename\" to $script [${outfile}]");
+		if (not $dh{NO_ACT}) {
+			open(my $out_fd, '>>', $outfile) or error("open(${outfile}): $!");
+			print {$out_fd} '# Automatically added by ' . $TOOL_NAME . "/${tool_version}\n";
+			autoscript_sed($sed, $infile, undef, $out_fd);
+			print {$out_fd} "# End automatically added section\n";
+			close($out_fd) or error("close(${outfile}): $!");
+		}
+	} else {
+		complex_doit("echo \"# Automatically added by ".$TOOL_NAME."/${tool_version}\">> $outfile");
+		autoscript_sed($sed, $infile, $outfile);
+		complex_doit("echo '# End automatically added section' >> $outfile");
+	}
+}
+
+sub autoscript_sed {
+	my ($sed, $infile, $outfile, $out_fd) = @_;
+	if (not defined($sed) or ref($sed)) {
+		my $out = $out_fd;
+		open(my $in, '<', $infile) or error("open $infile failed: $!");
+		if (not defined($out_fd)) {
+			open($out, '>>', $outfile) or error("open($outfile): $!");
+		}
+		if (not defined($sed) or ref($sed) eq 'CODE') {
+			while (<$in>) { $sed->() if $sed; print {$out} $_; }
+		} else {
+			my $rstr = sprintf('#(%s)#', join('|', reverse(sort(keys(%$sed)))));
+			my $regex = qr/$rstr/;
+			while (my $line = <$in>) {
+				$line =~ s/$regex/$sed->{$1}/eg;
+				print {$out} $line;
+			}
+		}
+		if (not defined($out_fd)) {
+			close($out) or error("close $outfile failed: $!");
+		}
+		close($in) or error("close $infile failed: $!");
+	}
+	else {
+		error("Internal error - passed open handle for legacy method") if defined($out_fd);
+		complex_doit("sed \"$sed\" $infile >> $outfile");
+	}
+}
+
+# Adds a trigger to the package
+{
+	my %VALID_TRIGGER_TYPES = map { $_ => 1 } qw(
+		interest interest-await interest-noawait
+		activate activate-await activate-noawait
+	);
+
+	sub autotrigger {
+		my ($package, $trigger_type, $trigger_target) = @_;
+		my ($triggers_file, $ifd, $tool_version);
+
+		if (not exists($VALID_TRIGGER_TYPES{$trigger_type})) {
+			require Carp;
+			Carp::confess("Invalid/unknown trigger ${trigger_type}");
+		}
+		return if $dh{NO_ACT};
+
+		$tool_version = _tool_version();
+		$triggers_file = generated_file($package, 'triggers');
+		if ( -f $triggers_file ) {
+			open($ifd, '<', $triggers_file)
+				or error("open $triggers_file failed $!");
+		} else {
+			open($ifd, '<', '/dev/null')
+				or error("open /dev/null failed $!");
+		}
+		open(my $ofd, '>', "${triggers_file}.new")
+			or error("open ${triggers_file}.new failed: $!");
+		while (my $line = <$ifd>) {
+			next if $line =~ m{\A  \Q${trigger_type}\E  \s+
+                                   \Q${trigger_target}\E (?:\s|\Z)
+                              }x;
+			print {$ofd} $line;
+		}
+		print {$ofd} '# Triggers added by ' . $TOOL_NAME . "/${tool_version}\n";
+		print {$ofd} "${trigger_type} ${trigger_target}\n";
+		close($ofd) or error("closing ${triggers_file}.new failed: $!");
+		close($ifd);
+		rename_path("${triggers_file}.new", $triggers_file);
+	}
+}
+
+# Generated files are cleaned by dh_clean AND dh_prep
+# - Package can be set to "_source" to generate a file relevant
+#   for the source package (the meson build does this atm.).
+#   Files for "_source" are only cleaned by dh_clean.
+sub generated_file {
+	my ($package, $filename, $mkdirs) = @_;
+	my $dir = "debian/.debhelper/generated/${package}";
+	my $path = "${dir}/${filename}";
+	$mkdirs //= 1;
+	mkdirs($dir) if $mkdirs;
+	return $path;
+}
+
+sub _update_substvar {
+	my ($substvar_file, $update_logic, $insert_logic) = @_;
+	my @lines;
+	my $changed = 0;
+	if ( -f $substvar_file) {
+		open(my $in, '<', $substvar_file) // error("open($substvar_file): $!");
+		while (my $line = <$in>) {
+			chomp($line);
+			my $orig_value = $line;
+			my $updated_value = $update_logic->($line);
+			$changed ||= !defined($updated_value) || $orig_value ne $updated_value;
+			push(@lines, $updated_value) if defined($updated_value);
+		}
+		close($in);
+	}
+	my $len = scalar(@lines);
+	push(@lines, $insert_logic->()) if $insert_logic;
+	$changed ||= $len != scalar(@lines);
+	if ($changed && !$dh{NO_ACT}) {
+		open(my $out, '>', "${substvar_file}.new") // error("open(${substvar_file}.new, \"w\"): $!");
+		for my $line (@lines) {
+			print {$out} "$line\n";
+		}
+		close($out) // error("close(${substvar_file}.new): $!");
+		rename_path("${substvar_file}.new", $substvar_file);
+	}
+	return;
+}
+
+# Removes a whole substvar line.
+sub delsubstvar {
+	my ($package, $substvar) = @_;
+	my $ext = pkgext($package);
+	my $substvarfile = "debian/${ext}substvars";
+
+	return _update_substvar($substvarfile, sub {
+		my ($line) = @_;
+		return $line if $line !~ m/^\Q${substvar}\E[?]?=/;
+		return;
+	});
+}
+				
+# Adds a dependency on some package to the specified
+# substvar in a package's substvar's file.
+sub addsubstvar {
+	my ($package, $substvar, $deppackage, $verinfo, $remove) = @_;
+	my ($present);
+	my $ext = pkgext($package);
+	my $substvarfile = "debian/${ext}substvars";
+	my $str = $deppackage;
+	$str .= " ($verinfo)" if defined $verinfo && length $verinfo;
+
+	if (not defined($deppackage) and not $remove) {
+		error("Bug in helper: Must provide a value for addsubstvar (or set the remove flag, but then use delsubstvar instead)")
+	}
+
+	if (defined($str) and $str =~ m/[\n]/) {
+		$str =~ s/\n/\\n/g;
+		# Per #1026014
+		warning('Unescaped newlines in the value of a substvars can cause broken substvars files (see #1025714).');
+		warning("Hint: If you really need a newline character, provide it as \"\${Newline}\".");
+		error("Bug in helper: The substvar must not contain a raw newline character (${substvar}=${str})");
+	}
+
+	my $update_logic = sub {
+		my ($line) = @_;
+		return $line if $line !~ m/^\Q${substvar}\E([?]?=)(.*)/;
+		my $assignment_type = $1;
+		my %items = map { $_ => 1 } split(", ", $2);
+		$present = 1;
+		if ($remove) {
+			# Unchanged; we can avoid rewriting the file.
+			return $line if not exists($items{$str});
+			delete($items{$str});
+			my $replacement = join(", ", sort(keys(%items)));
+			return "${substvar}${assignment_type}${replacement}" if $replacement ne '';
+			return;
+		}
+		# Unchanged; we can avoid rewriting the file.
+		return $line if %items and exists($items{$str});
+
+		$items{$str} = 1;
+		return "${substvar}${assignment_type}" . join(", ", sort(keys(%items)));
+	};
+	my $insert_logic = sub {
+		return ("${substvar}=${str}") if not $present and not $remove;
+		return;
+	};
+	return _update_substvar($substvarfile, $update_logic, $insert_logic);
+}
+
+sub _glob_expand_error_default_msg {
+	my ($pattern, $dir_ref) = @_;
+	my $dir_list = join(', ', map { escape_shell($_) } @{$dir_ref});
+	return "Cannot find (any matches for) \"${pattern}\" (tried in $dir_list)";
+}
+
+sub glob_expand_error_handler_reject {
+	my $msg = _glob_expand_error_default_msg(@_);
+	error("$msg\n");
+	return;
+}
+
+sub glob_expand_error_handler_warn_and_discard {
+	my $msg = _glob_expand_error_default_msg(@_);
+	warning("$msg\n");
+	return;
+}
+
+# Emulates the "old" glob mechanism; not recommended for new code as
+# it permits some globs expand to nothing with only a warning.
+sub glob_expand_error_handler_reject_nomagic_warn_discard {
+	my ($pattern, $dir_ref) = @_;
+	for my $dir (@{$dir_ref}) {
+		my $full_pattern = "$dir/$pattern";
+		my @matches = bsd_glob($full_pattern, GLOB_CSH & ~(GLOB_TILDE));
+		if (@matches) {
+			goto \&glob_expand_error_handler_reject;
+		}
+	}
+	goto \&glob_expand_error_handler_warn_and_discard;
+}
+
+sub glob_expand_error_handler_silently_ignore {
+	return;
+}
+
+sub glob_expand {
+	my ($dir_ref, $error_handler, @patterns) = @_;
+	my @dirs = @{$dir_ref};
+	my @result;
+	for my $pattern (@patterns) {
+		my @m;
+		for my $dir (@dirs) {
+			my $full_pattern = "$dir/$pattern";
+			@m = bsd_glob($full_pattern, GLOB_CSH & ~(GLOB_NOMAGIC|GLOB_TILDE));
+			last if @m;
+			# Handle "foo{bar}" pattern (#888251)
+			if (-l $full_pattern or -e _) {
+				push(@m, $full_pattern);
+				last;
+			}
+		}
+		if (not @m) {
+			$error_handler //= \&glob_expand_error_handler_reject;
+			$error_handler->($pattern, $dir_ref);
+		}
+		push(@result, @m);
+	}
+	return @result;
+}
+
+
+my %BUILT_IN_SUBST = (
+	'Space'        => ' ',
+	'Dollar'       => '$',
+	'Newline'      => "\n",
+	'Tab'          => "\t",
+);
+
+sub _variable_substitution {
+	my ($text, $loc) = @_;
+	return $text if index($text, '$') < 0;
+	my $pos = -1;
+	my $subst_count = 0;
+	my $expansion_count = 0;
+	my $current_size = length($text);
+	my $expansion_size_limit = _VAR_SUBST_EXPANSION_DYNAMIC_EXPANSION_FACTOR_LIMIT * $current_size;
+	$expansion_size_limit = _VAR_SUBST_EXPANSION_MIN_SUPPORTED_SIZE_LIMIT
+		if $expansion_size_limit < _VAR_SUBST_EXPANSION_MIN_SUPPORTED_SIZE_LIMIT;
+	1 while ($text =~ s<
+			\$\{([A-Za-z0-9][-_:0-9A-Za-z]*)\}  # Match ${something} and replace it
+		>[
+			my $match = $1;
+			my $new_pos = pos()//-1;
+			my $value;
+
+			if ($pos == $new_pos) {
+				# Safe-guard in case we ever implement recursive expansion
+				error("Error substituting in ${loc} (at position $pos); recursion limit while expanding \${${match}}")
+					if (++$subst_count >= _VAR_SUBST_SAME_POSITION_RECURSION_LIMIT);
+			} else {
+				$subst_count = 0;
+				$pos = $new_pos;
+				if (++$expansion_count >= _VAR_SUBST_EXPANSION_COUNT_LIMIT) {
+					error("Error substituting in ${loc}; substitution limit of ${expansion_count} reached");
+				}
+			}
+			if (exists($BUILT_IN_SUBST{$match})) {
+				$value = $BUILT_IN_SUBST{$match};
+			} elsif ($match =~ m/^DEB_(?:BUILD|HOST|TARGET)_/) {
+				$value = dpkg_architecture_value($match) //
+					error(qq{Cannot expand "\${${match}}" in ${loc} as it is not a known dpkg-architecture value});
+			} elsif ($match =~ m/^env:(.+)/) {
+				my $env_var = $1;
+				$value = $ENV{$env_var} //
+					error(qq{Cannot expand "\${${match}}" in ${loc} as the ENV variable "${env_var}" is unset});
+			}
+			error(qq{Cannot resolve variable "\${$match}" in ${loc}})
+				if not defined($value);
+			# We do not support recursive expansion.
+			$value =~ s/\$/\$\{\}/;
+			$current_size += length($value) - length($match) - 3;
+			if ($current_size > $expansion_size_limit) {
+				error("Refusing to expand \${${match}} in ${loc} - the original input seems to grow beyond reasonable'
+						 . ' limits!");
+			}
+			$value;
+		]gex);
+	$text =~ s/\$\{\}/\$/g;
+
+	return $text;
+}
+
+# Reads in the specified file, one line at a time. splits on words, 
+# and returns an array of arrays of the contents.
+# If a value is passed in as the second parameter, then glob
+# expansion is done in the directory specified by the parameter ("." is
+# frequently a good choice).
+# In compat 13+, it will do variable expansion (after splitting the lines
+# into words)
+sub filedoublearray {
+	my ($file, $globdir, $error_handler) = @_;
+
+	# executable config files are a v9 thing.
+	my $x=! compat(8) && -x $file;
+	my $expand_patterns = compat(12) ? 0 : 1;
+	my $source;
+	if ($x) {
+		require Cwd;
+		my $cmd=Cwd::abs_path($file);
+		$ENV{"DH_CONFIG_ACT_ON_PACKAGES"} = join(",", @{$dh{"DOPACKAGES"}});
+		open(DH_FARRAY_IN, '-|', $cmd) || error("cannot run $file: $!");
+		delete $ENV{"DH_CONFIG_ACT_ON_PACKAGES"};
+		$source = "output of ./${file}";
+	}
+	else {
+		open (DH_FARRAY_IN, '<', $file) || error("cannot read $file: $!");
+		$source = $file;
+	}
+
+	my @ret;
+	while (<DH_FARRAY_IN>) {
+		chomp;
+		if ($x) {
+			if (m/^\s++$/) {
+				error("Executable config file $file produced a non-empty whitespace-only line");
+			}
+		} else {
+			s/^\s++//;
+			next if /^#/;
+			s/\s++$//;
+		}
+		# We always ignore/permit empty lines
+		next if $_ eq '';
+		my @line;
+		my $source_ref = "${source} (line $.)";
+
+		if (defined($globdir) && ! $x) {
+			if (ref($globdir)) {
+				my @patterns = split;
+				if ($expand_patterns) {
+					@patterns = map {_variable_substitution($_, $source_ref)} @patterns;
+				}
+				push(@line, glob_expand($globdir, $error_handler, @patterns));
+			} else {
+				# Legacy call - Silently discards globs that match nothing.
+				#
+				# The tricky bit is that the glob expansion is done
+				# as if we were in the specified directory, so the
+				# filenames that come out are relative to it.
+				foreach (map { glob "$globdir/$_" } split) {
+					s#^$globdir/##;
+					if ($expand_patterns) {
+						$_ = _variable_substitution($_, $source_ref);
+					}
+					push @line, $_;
+				}
+			}
+		}
+		else {
+			@line = split;
+			if ($expand_patterns) {
+				@line = map {_variable_substitution($_, $source_ref)} @line;
+			}
+		}
+		push @ret, [@line];
+	}
+
+	if (!close(DH_FARRAY_IN)) {
+		if ($x) {
+			_executable_dh_config_file_failed($file, $!, $?);
+		} else {
+			error("problem reading $file: $!");
+		}
+	}
+	
+	return @ret;
+}
+
+# Reads in the specified file, one word at a time, and returns an array of
+# the result. Can do globbing as does filedoublearray.
+sub filearray {
+	return map { @$_ } filedoublearray(@_);
+}
+
+# Passed a filename, returns true if -X says that file should be excluded.
+sub excludefile {
+        my $filename = shift;
+        foreach my $f (@{$dh{EXCLUDE}}) {
+                return 1 if $filename =~ /\Q$f\E/;
+        }
+        return 0;
+}
+
+sub dpkg_architecture_value {
+	my $var = shift;
+	state %dpkg_arch_output;
+	if (exists($ENV{$var})) {
+		my $value = $ENV{$var};
+		return $value if $value ne q{};
+		warning("ENV[$var] is set to the empty string.  It has been ignored to avoid bugs like #862842");
+		delete($ENV{$var});
+	}
+	if (! exists($dpkg_arch_output{$var})) {
+		# Return here if we already consulted dpkg-architecture
+		# (saves a fork+exec on unknown variables)
+		return if %dpkg_arch_output;
+
+		open(my $fd, '-|', 'dpkg-architecture')
+			or error("dpkg-architecture failed");
+		while (my $line = <$fd>) {
+			chomp($line);
+			my ($k, $v) = split(/=/, $line, 2);
+			$dpkg_arch_output{$k} = $v;
+		}
+		close($fd);
+	}
+	return $dpkg_arch_output{$var};
+}
+
+# Confusing name for hostarch
+sub buildarch {
+	deprecated_functionality('buildarch() is deprecated and replaced by hostarch()', 12);
+	goto \&hostarch;
+}
+
+# Returns the architecture that will run binaries produced (DEB_HOST_ARCH)
+sub hostarch {
+	dpkg_architecture_value('DEB_HOST_ARCH');
+}
+
+# Returns a truth value if this seems to be a cross-compile
+sub is_cross_compiling {
+	return dpkg_architecture_value("DEB_BUILD_GNU_TYPE")
+	    ne dpkg_architecture_value("DEB_HOST_GNU_TYPE");
+}
+
+# Passed an arch and a space-separated list of arches to match against, returns true if matched
+sub samearch {
+	my $arch=shift;
+	my @archlist=split(/\s+/,shift);
+	state %knownsame;
+
+	foreach my $a (@archlist) {
+		if (exists $knownsame{$arch}{$a}) {
+			return 1 if $knownsame{$arch}{$a};
+			next;
+		}
+
+		require Dpkg::Arch;
+		if (Dpkg::Arch::debarch_is($arch, $a)) {
+			return $knownsame{$arch}{$a}=1;
+		}
+		else {
+			$knownsame{$arch}{$a}=0;
+		}
+	}
+
+	return 0;
+}
+
+
+# Returns a list of packages in the control file.
+# Pass "arch" or "indep" to specify arch-dependent (that will be built
+# for the system's arch) or independent. If nothing is specified,
+# returns all packages. Also, "both" returns the union of "arch" and "indep"
+# packages.
+#
+# As a side effect, populates %package_arches and %package_types
+# with the types of all packages (not only those returned).
+my (%package_types, %package_arches, %package_multiarches, %packages_by_type,
+    %package_sections, $sourcepackage, %package_cross_type, %dh_bd_sequences);
+
+# Resets the arrays; used mostly for testing
+sub resetpackages {
+	undef $sourcepackage;
+	%package_types = %package_arches = %package_multiarches =
+	    %packages_by_type = %package_sections = %package_cross_type = ();
+	%dh_bd_sequences = ();
+}
+
+# Returns source package name
+sub sourcepackage {
+	getpackages() if not defined($sourcepackage);
+	return $sourcepackage;
+}
+
+sub getpackages {
+	my ($type) = @_;
+	error("getpackages: First argument must be one of \"arch\", \"indep\", or \"both\"")
+		if defined($type) and $type ne 'both' and $type ne 'indep' and $type ne 'arch';
+
+	$type //= 'all-listed-in-control-file';
+
+	if (not %packages_by_type) {
+		_parse_debian_control();
+	}
+	return @{$packages_by_type{$type}};
+}
+
+sub _strip_spaces {
+	my ($v) = @_;
+	return if not defined($v);
+	$v =~ s/^\s++//;
+	$v =~ s/\s++$//;
+	return $v;
+}
+
+sub _parse_debian_control {
+	my $valid_pkg_re = qr{^${PKGNAME_REGEX}$}o;
+	my (%seen, @profiles, $source_section, $cross_target_arch, %field_values,
+		$field_name, %bd_fields, $bd_field_value, %seen_fields, $fd);
+	if (exists $ENV{'DEB_BUILD_PROFILES'}) {
+		@profiles=split /\s+/, $ENV{'DEB_BUILD_PROFILES'};
+	}
+	if (not open($fd, '<', 'debian/control')) {
+		error("\"debian/control\" not found. Are you sure you are in the correct directory?")
+			if $! == ENOENT;
+		error("cannot read debian/control: $!\n");
+	};
+
+	$packages_by_type{$_} = [] for qw(both indep arch all-listed-in-control-file);
+	while (<$fd>) {
+		chomp;
+		s/\s+$//;
+		next if m/^\s*+\#/;
+
+		if (/^\s/) {
+			if (not %seen_fields) {
+				error("Continuation line seen before first stanza in debian/control (line $.)");
+			}
+			# Continuation line
+			s/^\s[.]?//;
+			push(@{$bd_field_value}, $_) if $bd_field_value;
+			# Ensure it is not completely empty or the code below will assume the paragraph ended
+			$_ = '.' if not $_;
+		} elsif (not $_ and not %seen_fields) {
+			# Ignore empty lines before first stanza
+			next;
+		} elsif ($_) {
+			my ($value);
+
+			if (m/^($DEB822_FIELD_REGEX):\s*(.*)/o) {
+				($field_name, $value) = (lc($1), $2);
+				if (exists($seen_fields{$field_name})) {
+					my $first_time = $seen_fields{$field_name};
+					error("${field_name}-field appears twice in the same stanza of debian/control. " .
+						  "First time on line $first_time, second time: $.");
+				}
+				$seen_fields{$field_name} = $.;
+				$bd_field_value = undef;
+			} else {
+				# Invalid file
+				error("Parse error in debian/control, line $., read: $_");
+			}
+			if ($field_name eq 'source') {
+				$sourcepackage = $value;
+				if ($sourcepackage !~ $valid_pkg_re) {
+					error('Source-field must be a valid package name, ' .
+						  "got: \"${sourcepackage}\", should match \"${valid_pkg_re}\"");
+				}
+				next;
+			} elsif ($field_name eq 'section') {
+				$source_section = $value;
+				next;
+			} elsif ($field_name =~ /^(?:build-depends(?:-arch|-indep)?)$/) {
+				$bd_field_value = [$value];
+				$bd_fields{$field_name} = $bd_field_value;
+			}
+		}
+		last if not $_ or eof;
+	}
+	error("could not find Source: line in control file.") if not defined($sourcepackage);
+	if (%bd_fields) {
+		my ($dh_compat_bd, $final_level);
+		my %field2addon_type = (
+			'build-depends' => 'both',
+			'build-depends-arch' => 'arch',
+			'build-depends-indep' => 'indep',
+		);
+		for my $field (sort(keys(%bd_fields))) {
+			my $value = join(' ', @{$bd_fields{$field}});
+			$value =~ s/^\s*//;
+			$value =~ s/\s*(?:,\s*)?$//;
+			for my $dep (split(/\s*,\s*/, $value)) {
+				if ($dep =~ m/^debhelper-compat\s*[(]\s*=\s*(${PKGVERSION_REGEX})\s*[)]$/) {
+					my $version = $1;
+					if ($version =~m/^(\d+)\D.*$/) {
+						my $guessed_compat = $1;
+						warning("Please use the compat level as the exact version rather than the full version.");
+						warning("  Perhaps you meant: debhelper-compat (= ${guessed_compat})");
+						if ($field ne 'build-depends') {
+							warning(" * Also, please move the declaration to Build-Depends (it was found in ${field})");
+						}
+						error("Invalid compat level ${version}, derived from relation: ${dep}");
+					}
+					$final_level = $version;
+					error("Duplicate debhelper-compat build-dependency: ${dh_compat_bd} vs. ${dep}") if $dh_compat_bd;
+					error("The debhelper-compat build-dependency must be in the Build-Depends field (not $field)")
+						if $field ne 'build-depends';
+					$dh_compat_bd = $dep;
+				} elsif ($dep =~ m/^debhelper-compat\s*(?:\S.*)?$/) {
+					my $clevel = "${\MAX_COMPAT_LEVEL}";
+					eval {
+						require Debian::Debhelper::Dh_Version;
+						$clevel = $Debian::Debhelper::Dh_Version::version;
+					};
+					$clevel =~ s/^\d+\K\D.*$//;
+					warning("Found invalid debhelper-compat relation: ${dep}");
+					warning(" * Please format the relation as (example): debhelper-compat (= ${clevel})");
+					warning(" * Note that alternatives, architecture restrictions, build-profiles etc. are not supported.");
+					if ($field ne 'build-depends') {
+						warning(" * Also, please move the declaration to Build-Depends (it was found in ${field})");
+					}
+					warning(" * If this is not possible, then please remove the debhelper-compat relation and insert the");
+					warning("   compat level into the file debian/compat.  (E.g. \"echo ${clevel} > debian/compat\")");
+					error("Could not parse desired debhelper compat level from relation: $dep");
+				}
+				# Build-Depends on dh-sequence-<foo> OR dh-sequence-<foo> (<op> <version>)
+				if ($PARSE_DH_SEQUENCE_INFO and $dep =~ m/^dh-sequence-(${PKGNAME_REGEX})\s*(?:[(]\s*(?:[<>]?=|<<|>>)\s*(?:${PKGVERSION_REGEX})\s*[)])?(\s*[^\|]+[]>]\s*)?$/) {
+					my $sequence = $1;
+					my $has_profile_or_arch_restriction = $2 ? 1 : 0;
+					my $addon_type = $field2addon_type{$field};
+					if (not defined($field)) {
+						warning("Cannot map ${field} to an add-on type (like \"both\", \"indep\" or \"arch\")");
+						error("Internal error: Cannot satisfy dh sequence add-on request for sequence ${sequence} via ${field}.");
+					}
+					if (defined($dh_bd_sequences{$sequence})) {
+						error("Saw $dep multiple times (last time in $field).  However dh only support that build-"
+							. 'dependency at most once across all Build-Depends(-Arch|-Indep) fields');
+					}
+					if ($has_profile_or_arch_restriction) {
+						require Dpkg::Deps;
+						my $dpkg_dep = Dpkg::Deps::deps_parse($dep, build_profiles => \@profiles, build_dep => 1,
+							reduce_restrictions => 1);
+						# If dpkg reduces it to nothing, then it was not relevant for us after all
+						next if not $dpkg_dep;
+					}
+					$dh_bd_sequences{$sequence} = $addon_type;
+				}
+			}
+		}
+		$compat_from_bd = $final_level // -1;
+	} else {
+		$compat_from_bd = -1;
+	}
+
+	%seen_fields = ();
+	$field_name = undef;
+
+	while (<$fd>) {
+		chomp;
+		s/\s+$//;
+		if (m/^\#/) {
+			# Skip unless EOF for the special case where the last line
+			# is a comment line directly after the last stanza.  In
+			# that case we need to "commit" the last stanza as well or
+			# we end up omitting the last package.
+			next if not eof;
+			$_  = '';
+		}
+
+		if (/^\s/) {
+			# Continuation line
+			if (not %seen_fields) {
+				error("Continuation line seen outside stanza in debian/control (line $.)");
+			}
+			s/^\s[.]?//;
+			$field_values{$field_name} .= ' ' . $_;
+			# Ensure it is not completely empty or the code below will assume the paragraph ended
+			$_ = '.' if not $_;
+		} elsif (not $_ and not %seen_fields) {
+			# Ignore empty lines before first stanza
+			next;
+		} elsif ($_) {
+			my ($value);
+			if (m/^($DEB822_FIELD_REGEX):\s*(.*)/o) {
+				($field_name, $value) = (lc($1), $2);
+				if (exists($seen_fields{$field_name})) {
+					my $first_time = $seen_fields{$field_name};
+					error("${field_name}-field appears twice in the same stanza of debian/control. " .
+						  "First time on line $first_time, second time: $.");
+				}
+
+				if ($field_name =~ m/^(?:x[bc]*-)?package-type$/) {
+					# Normalize variants into the main "Package-Type" field
+					$field_name = 'package-type';
+					if (exists($seen_fields{$field_name})) {
+						my $package = _strip_spaces($field_values{'package'} // '');
+						my $help = "(issue seen prior \"Package\"-field)";
+						$help = "for package ${package}" if $package;
+						error("Multiple definitions of (X-)Package-Type in line $. ${help}");
+					}
+				}
+				$seen_fields{$field_name} = $.;
+				$field_values{$field_name} = $value;
+				$bd_field_value = undef;
+			} else {
+				# Invalid file
+				error("Parse error in debian/control, line $., read: $_");
+			}
+		}
+		if (!$_ or eof) { # end of stanza.
+			if (%field_values) {
+				my $package = _strip_spaces($field_values{'package'} // '');
+				my $build_profiles = $field_values{'build-profiles'};
+				my $included_in_build_profile = 1;
+				my $arch = _strip_spaces($field_values{'architecture'} // '');
+				my $cross_type = _strip_spaces($field_values{'x-dh-build-for-type'} // 'host');
+
+				# Detect duplicate package names in the same control file.
+				if ($package eq '') {
+					error("Binary paragraph ending on line $. is missing mandatory \"Package\"-field");
+				}
+				if (! $seen{$package}) {
+					$seen{$package}=1;
+				} else {
+					error("debian/control has a duplicate entry for $package");
+				}
+				if ($package !~ $valid_pkg_re) {
+					error('Package-field must be a valid package name, ' .
+						  "got: \"${package}\", should match \"${valid_pkg_re}\"");
+				}
+				if ($cross_type ne 'host' and $cross_type ne 'target') {
+					error("Unknown value of X-DH-Build-For-Type \"$cross_type\" for package $package");
+				}
+
+				$package_types{$package} = _strip_spaces($field_values{'package-type'} // 'deb');
+				$package_arches{$package} = $arch;
+				$package_multiarches{$package} = _strip_spaces($field_values{'multi-arch'} // '');
+				$package_sections{$package} = _strip_spaces($field_values{'section'} // $source_section);
+				$package_cross_type{$package} = $cross_type;
+				push(@{$packages_by_type{'all-listed-in-control-file'}}, $package);
+
+				if (defined($build_profiles)) {
+					eval {
+						# rely on libdpkg-perl providing the parsing functions
+						# because if we work on a package with a Build-Profiles
+						# field, then a high enough version of dpkg-dev is needed
+						# anyways
+						require Dpkg::BuildProfiles;
+						my @restrictions = Dpkg::BuildProfiles::parse_build_profiles($build_profiles);
+						if (@restrictions) {
+							$included_in_build_profile = Dpkg::BuildProfiles::evaluate_restriction_formula(
+								\@restrictions,
+								\@profiles);
+						}
+					};
+					if ($@) {
+						error("The control file has a Build-Profiles field. Requires libdpkg-perl >= 1.17.14");
+					}
+				}
+
+				if ($included_in_build_profile) {
+					if ($arch eq 'all') {
+						push(@{$packages_by_type{'indep'}}, $package);
+						push(@{$packages_by_type{'both'}}, $package);
+					} else {
+						my $included = 0;
+						$included = 1 if $arch eq 'any';
+						if (not $included) {
+							my $desired_arch = hostarch();
+							if ($cross_type eq 'target') {
+								$cross_target_arch //= dpkg_architecture_value('DEB_TARGET_ARCH');
+								$desired_arch = $cross_target_arch;
+							}
+							$included = 1 if samearch($desired_arch, $arch);
+						}
+						if ($included) {
+								push(@{$packages_by_type{'arch'}}, $package);
+								push(@{$packages_by_type{'both'}}, $package);
+						}
+					}
+				}
+			}
+			%field_values = ();
+			%seen_fields = ();
+		}
+	}
+	close($fd);
+}
+
+# Return true if we should use root.
+# - Takes an optional keyword; if passed, this will return true if the keyword is listed in R^3 (Rules-Requires-Root)
+# - If the optional keyword is omitted or not present in R^3 and R^3 is not 'binary-targets', then returns false
+# - Returns true otherwise (i.e. keyword is in R^3 or R^3 is 'binary-targets')
+sub should_use_root {
+	my ($keyword) = @_;
+	my $rrr_env = $ENV{'DEB_RULES_REQUIRES_ROOT'} // 'binary-targets';
+	$rrr_env =~ s/^\s++//;
+	$rrr_env =~ s/\s++$//;
+	return 0 if $rrr_env eq 'no';
+	return 1 if $rrr_env eq 'binary-targets';
+	return 0 if not defined($keyword);
+
+	state %rrr = map { $_ => 1 } split(' ', $rrr_env);
+	return 1 if exists($rrr{$keyword});
+	return 0;
+}
+
+# Returns the "gain root command" as a list suitable for passing as a part of the command to "doit()"
+sub gain_root_cmd {
+	my $raw_cmd = $ENV{DEB_GAIN_ROOT_CMD};
+	return if not defined($raw_cmd) or $raw_cmd =~ m/^\s*+$/;
+	return split(' ', $raw_cmd);
+}
+
+sub root_requirements {
+	my $rrr_env = $ENV{'DEB_RULES_REQUIRES_ROOT'} // 'binary-targets';
+	$rrr_env =~ s/^\s++//;
+	$rrr_env =~ s/\s++$//;
+	return 'none' if $rrr_env eq 'no';
+	return 'legacy-root' if $rrr_env eq 'binary-targets';
+	return 'targeted-promotion';
+}
+
+# Returns the arch a package will build for.
+#
+# Deprecated: please switch to the more descriptive
+# package_binary_arch function instead.
+sub package_arch {
+	my $package=shift;
+	return package_binary_arch($package);
+}
+
+# Returns the architecture going into the resulting .deb, i.e. the
+# host architecture or "all".
+sub package_binary_arch {
+	my $package=shift;
+
+	if (! exists $package_arches{$package}) {
+		warning "package $package is not in control info";
+		return hostarch();
+	}
+	return 'all' if $package_arches{$package} eq 'all';
+	return dpkg_architecture_value('DEB_TARGET_ARCH') if package_cross_type($package) eq 'target';
+	return hostarch();
+}
+
+# Returns the Architecture: value which the package declared.
+sub package_declared_arch {
+	my $package=shift;
+
+	if (! exists $package_arches{$package}) {
+		warning "package $package is not in control info";
+		return hostarch();
+	}
+	return $package_arches{$package};
+}
+
+# Returns whether the package specified Architecture: all
+sub package_is_arch_all {
+	my $package=shift;
+
+	if (! exists $package_arches{$package}) {
+		warning "package $package is not in control info";
+		return hostarch();
+	}
+	return $package_arches{$package} eq 'all';
+}
+
+# Returns the multiarch value of a package.
+sub package_multiarch {
+	my $package=shift;
+
+	# Test the architecture field instead, as it is common for a
+	# package to not have a multi-arch value.
+	if (! exists $package_arches{$package}) {
+		warning "package $package is not in control info";
+		# The only sane default
+		return 'no';
+	}
+	return $package_multiarches{$package} // 'no';
+}
+
+# Returns the (raw) section value of a package (possibly including component).
+sub package_section {
+	my ($package) = @_;
+
+	# Test the architecture field instead, as it is common for a
+	# package to not have a multi-arch value.
+	if (! exists $package_sections{$package}) {
+		warning "package $package is not in control info";
+		return 'unknown';
+	}
+	return $package_sections{$package} // 'unknown';
+}
+
+sub package_cross_type {
+	my ($package) = @_;
+
+	# Test the architecture field instead, as it is common for a
+	# package to not have a multi-arch value.
+	if (! exists $package_cross_type{$package}) {
+		warning "package $package is not in control info";
+		return 'host';
+	}
+	return $package_cross_type{$package} // 'host';
+}
+
+sub package_type {
+	my ($package) = @_;
+
+	if (! exists $package_types{$package}) {
+		warning "package $package is not in control info";
+		return DEFAULT_PACKAGE_TYPE;
+	}
+	return $package_types{$package};
+}
+
+# Return true if a given package is really a udeb.
+sub is_udeb {
+	my $package=shift;
+	
+	return package_type($package) eq 'udeb';
+}
+
+
+sub process_pkg {
+	my ($package) = @_;
+	state %packages_to_process = map { $_ => 1 } @{$dh{DOPACKAGES}};
+	return $packages_to_process{$package} // 0;
+}
+
+# Only useful for dh(1)
+sub bd_dh_sequences {
+	# Use $sourcepackage as check because %dh_bd_sequence can be empty
+	# after running getpackages().
+	getpackages() if not defined($sourcepackage);
+	return \%dh_bd_sequences;
+}
+
+sub _concat_slurp_script_files {
+	my (@files) = @_;
+	my $res = '';
+	for my $file (@files) {
+		open(my $fd, '<', $file) or error("open($file) failed: $!");
+		my $f = join('', <$fd>);
+		close($fd);
+		$res .= $f;
+	}
+	return $res;
+}
+
+sub _substitution_generator {
+	my ($input) = @_;
+	my $cache = {};
+	return sub {
+		my ($orig_key) = @_;
+		return $cache->{$orig_key} if exists($cache->{$orig_key});
+		my $value = exists($input->{$orig_key}) ? $input->{$orig_key} : undef;
+		if (not defined($value)) {
+			if ($orig_key =~ m/^DEB_(?:BUILD|HOST|TARGET)_/) {
+				$value = dpkg_architecture_value($orig_key);
+			} elsif ($orig_key =~ m{^ENV[.](\S+)$}) {
+				$value = $ENV{$1} // '';
+			}
+		} elsif (ref($value) eq 'CODE') {
+			$value = $value->($orig_key);
+		} elsif ($value =~ s/^@//) {
+			$value = _concat_slurp_script_files($value);
+		}
+		$cache->{$orig_key} = $value;
+		return $value;
+	};
+}
+
+sub debhelper_script_per_package_subst {
+	my ($package, $provided_subst) = @_;
+	my %vars = %{$provided_subst};
+	$vars{'PACKAGE'} = $package if not exists($vars{'PACKAGE'});
+	for my $var (keys(%{$provided_subst})) {
+		if ($var !~ $Debian::Debhelper::Dh_Lib::MAINTSCRIPT_TOKEN_REGEX) {
+			warning("User defined token ${var} does not match ${Debian::Debhelper::Dh_Lib::MAINTSCRIPT_TOKEN_REGEX}");
+			error("Invalid provided token ${var}: It cannot be substituted as it does not follow the token name rules");
+		}
+		if ($var =~ m/^pkg[.]\Q${package}\E[.](.+)$/) {
+			my $new_key = $1;
+			$vars{$new_key} = $provided_subst->{$var};
+		}
+	}
+	return \%vars;
+}
+
+
+# Handles #DEBHELPER# substitution in a script; also can generate a new
+# script from scratch if none exists but there is a .debhelper file for it.
+sub debhelper_script_subst {
+	my ($package, $script, $extra_vars) = @_;
+
+	my $tmp=tmpdir($package);
+	my $ext=pkgext($package);
+	my $file=pkgfile($package,$script);
+	my %variables = defined($extra_vars) ? %{$extra_vars} : ();
+	my $service_script = generated_file($package, "${script}.service", 0);
+	my @generated_scripts = ("debian/$ext$script.debhelper", $service_script);
+	my $subst;
+	@generated_scripts = grep { -f } @generated_scripts;
+	if ($script eq 'prerm' or $script eq 'postrm') {
+		@generated_scripts = reverse(@generated_scripts);
+	}
+	if (not exists($variables{'DEBHELPER'})) {
+		$variables{'DEBHELPER'} = sub {
+			return _concat_slurp_script_files(@generated_scripts);
+		};
+	}
+	$subst = _substitution_generator(\%variables);
+
+	if ($file ne '') {
+		if ($dh{VERBOSE}) {
+			verbose_print('cp -f ' . escape_shell($file) . " $tmp/DEBIAN/$script");
+			verbose_print("[META] Replace #TOKEN#s in \"$tmp/DEBIAN/$script\"");
+		}
+		if (not $dh{NO_ACT}) {
+			my $regex = qr{#(${MAINTSCRIPT_TOKEN_REGEX})#}o;
+			open(my $out_fd, '>', "$tmp/DEBIAN/$script") or error("open($tmp/DEBIAN/$script) failed: $!");
+			open(my $in_fd, '<', $file) or error("open($file) failed: $!");
+			while (my $line = <$in_fd>) {
+				$line =~ s{$regex}{$subst->($1) // "#${1}#"}ge;
+				print {$out_fd} $line;
+			}
+			close($in_fd);
+			close($out_fd) or error("close($tmp/DEBIAN/$script) failed: $!");
+		}
+		reset_perm_and_owner('0755', "$tmp/DEBIAN/$script");
+	}
+	elsif (@generated_scripts) {
+		if ($dh{VERBOSE}) {
+			verbose_print(q{printf '#!/bin/sh\nset -e\n' > } . "$tmp/DEBIAN/$script");
+			verbose_print("cat @generated_scripts >> $tmp/DEBIAN/$script");
+		}
+		if (not $dh{NO_ACT}) {
+			open(my $out_fd, '>', "$tmp/DEBIAN/$script") or error("open($tmp/DEBIAN/$script): $!");
+			print {$out_fd} "#!/bin/sh\n";
+			print {$out_fd} "set -e\n";
+			for my $generated_script (@generated_scripts) {
+				open(my $in_fd, '<', $generated_script)
+					or error("open($generated_script) failed: $!");
+				while (my $line = <$in_fd>) {
+					print {$out_fd} $line;
+				}
+				close($in_fd);
+			}
+			close($out_fd) or error("close($tmp/DEBIAN/$script) failed: $!");
+		}
+		reset_perm_and_owner('0755', "$tmp/DEBIAN/$script");
+	}
+}
+
+sub rm_files {
+	my @files = @_;
+	verbose_print('rm -f ' . escape_shell(@files))
+		if $dh{VERBOSE};
+	return 1 if $dh{NO_ACT};
+	for my $file (@files) {
+		if (not unlink($file) and $! != ENOENT) {
+			error("unlink $file failed: $!");
+		}
+	}
+	return 1;
+}
+
+sub make_symlink_raw_target {
+	my ($src, $dest) = @_;
+	verbose_print('ln -s ' . escape_shell($src, $dest))
+		if $dh{VERBOSE};
+	return 1 if $dh{NO_ACT};
+	if (not symlink($src, $dest)) {
+		error("symlink($src, $dest) failed: $!");
+	}
+	return 1;
+}
+
+# make_symlink($dest, $src[, $tmp]) creates a symlink from  $dest -> $src.
+# if $tmp is given, $dest will be created within it.
+# Usually $tmp should be the value of tmpdir($package);
+sub make_symlink{
+	my $dest = shift;
+	my $src = _expand_path(shift);
+	my $tmp = shift;
+	$tmp = '' if not defined($tmp);
+
+	if ($dest =~ m{(?:^|/)*[.]{2}(?:/|$)}) {
+		error("Invalid destination/link name (contains \"..\"-segments): $dest");
+	}
+
+	$src =~ s{^(?:[.]/+)++}{};
+	$dest =~ s{^(?:[.]/+)++}{};
+
+	$src=~s:^/++::;
+	$dest=~s:^/++::;
+
+	if ($src eq $dest) {
+		warning("skipping link from $src to self");
+		return;
+	}
+
+
+
+	# Policy says that if the link is all within one toplevel
+	# directory, it should be relative. If it's between
+	# top level directories, leave it absolute.
+	my @src_dirs = grep { $_ ne '.' } split(m:/+:,$src);
+	my @dest_dirs = grep { $_ ne '.' } split(m:/+:,$dest);
+	if (@src_dirs > 0 && $src_dirs[0] eq $dest_dirs[0]) {
+		# Figure out how much of a path $src and $dest
+		# share in common.
+		my $x;
+		for ($x=0; $x < @src_dirs && $src_dirs[$x] eq $dest_dirs[$x]; $x++) {}
+		# Build up the new src.
+		$src="";
+		for (1..$#dest_dirs - $x) {
+			$src.="../";
+		}
+		for ($x .. $#src_dirs) {
+			$src.=$src_dirs[$_]."/";
+		}
+		if ($x > $#src_dirs && ! length $src) {
+			$src="."; # special case
+		}
+		$src=~s:/$::;
+	}
+	else {
+		# Make sure it's properly absolute.
+		$src="/$src";
+	}
+
+	my $full_dest = "$tmp/$dest";
+	if ( -l $full_dest ) {
+		# All ok - we can always replace a link, and target directory must exists
+	} elsif (-d _) {
+		# We cannot replace a directory though
+		error("link destination $full_dest is a directory");
+	} else {
+		# Make sure the directory the link will be in exists.
+		my $basedir=dirname($full_dest);
+		install_dir($basedir);
+	}
+	rm_files($full_dest);
+	make_symlink_raw_target($src, $full_dest);
+}
+
+# _expand_path expands all path "." and ".." components, but doesn't
+# resolve symbolic links.
+sub _expand_path {
+	my $start = @_ ? shift : '.';
+	my @pathname = split(m:/+:,$start);
+	my @respath;
+	for my $entry (@pathname) {
+		if ($entry eq '.' || $entry eq '') {
+			# Do nothing
+		}
+		elsif ($entry eq '..') {
+			if ($#respath == -1) {
+				# Do nothing
+			}
+			else {
+				pop @respath;
+			}
+		}
+		else {
+			push @respath, $entry;
+		}
+	}
+
+	my $result;
+	for my $entry (@respath) {
+		$result .= '/' . $entry;
+	}
+	if (! defined $result) {
+		$result="/"; # special case
+	}
+	return $result;
+}
+
+# Checks if make's jobserver is enabled via MAKEFLAGS, but
+# the FD used to communicate with it is actually not available.
+sub is_make_jobserver_unavailable {
+	if (exists $ENV{MAKEFLAGS} && 
+	    $ENV{MAKEFLAGS} =~ /(?:^|\s)--jobserver-(?:fds|auth)=(\d+)/) {
+		if (!open(my $in, "<&$1")) {
+			return 1; # unavailable
+		}
+		else {
+			close $in;
+			return 0; # available
+		}
+	}
+
+	return; # no jobserver specified
+}
+
+# Cleans out jobserver options from MAKEFLAGS.
+sub clean_jobserver_makeflags {
+	if (exists $ENV{MAKEFLAGS}) {
+		if ($ENV{MAKEFLAGS} =~ /(?:^|\s)--jobserver-(?:fds|auth)=\d+/) {
+			$ENV{MAKEFLAGS} =~ s/(?:^|\s)--jobserver-(?:fds|auth)=\S+//g;
+			$ENV{MAKEFLAGS} =~ s/(?:^|\s)-j\b//g;
+		}
+		delete $ENV{MAKEFLAGS} if $ENV{MAKEFLAGS} =~ /^\s*$/;
+	}
+}
+
+# If cross-compiling, returns appropriate cross version of command.
+sub cross_command {
+	my ($package, $command) = @_;
+	if (package_cross_type($package) eq 'target') {
+		if (dpkg_architecture_value("DEB_HOST_GNU_TYPE") ne dpkg_architecture_value("DEB_TARGET_GNU_TYPE")) {
+			return dpkg_architecture_value("DEB_TARGET_GNU_TYPE") . "-$command";
+		}
+	}
+	if (is_cross_compiling()) {
+		return dpkg_architecture_value("DEB_HOST_GNU_TYPE")."-$command";
+	}
+	else {
+		return $command;
+	}
+}
+
+# Returns the SOURCE_DATE_EPOCH ENV variable if set OR computes it
+# from the latest changelog entry, sets the SOURCE_DATE_EPOCH ENV
+# variable and returns the computed value.
+sub get_source_date_epoch {
+	return $ENV{SOURCE_DATE_EPOCH} if exists($ENV{SOURCE_DATE_EPOCH});
+	_parse_non_binnmu_date_epoch();
+	return $ENV{SOURCE_DATE_EPOCH};
+}
+
+{
+	my $_non_binnmu_date_epoch;
+
+	# Needed for dh_strip_nondeterminism - not exported by default because it is not likely
+	# to be useful beyond that one helper.
+	sub get_non_binnmu_date_epoch {
+		return $_non_binnmu_date_epoch if defined($_non_binnmu_date_epoch);
+		_parse_non_binnmu_date_epoch();
+		return $_non_binnmu_date_epoch;
+	}
+
+	sub _parse_non_binnmu_date_epoch {
+		eval { require Dpkg::Changelog::Debian };
+		if ($@) {
+			warning "unable to set SOURCE_DATE_EPOCH: $@";
+			return;
+		}
+		eval { require Time::Piece };
+		if ($@) {
+			warning "unable to set SOURCE_DATE_EPOCH: $@";
+			return;
+		}
+
+		my $changelog = Dpkg::Changelog::Debian->new(range => {"count" => 2});
+		$changelog->load("debian/changelog");
+
+		my $first_entry = $changelog->[0];
+		my $non_binnmu_entry = $first_entry;
+		my $optional_fields = $first_entry->get_optional_fields();
+		my $first_tt = $first_entry->get_timestamp();
+		$first_tt =~ s/\s*\([^\)]+\)\s*$//; # Remove the optional timezone codename
+		my $first_timestamp = Time::Piece->strptime($first_tt, "%a, %d %b %Y %T %z")->epoch;
+		my $non_binnmu_timestamp = $first_timestamp;
+		if (exists($optional_fields->{'Binary-Only'}) and lc($optional_fields->{'Binary-Only'}) eq 'yes') {
+			$non_binnmu_entry = $changelog->[1];
+			my $non_binnmu_options = $non_binnmu_entry->get_optional_fields();
+			if (exists($non_binnmu_options->{'Binary-Only'}) and lc($non_binnmu_options->{'Binary-Only'}) eq 'yes') {
+				error("internal error: Could not locate the first non-binnmu entry in the change (assumed it would be the second entry)");
+			}
+			my $non_binnmu_tt = $non_binnmu_entry->get_timestamp();
+			$non_binnmu_tt =~ s/\s*\([^\)]+\)\s*$//; # Remove the optional timezone codename
+			$non_binnmu_timestamp = Time::Piece->strptime($non_binnmu_tt, "%a, %d %b %Y %T %z")->epoch();
+		}
+
+		$ENV{SOURCE_DATE_EPOCH} = $first_timestamp if not exists($ENV{SOURCE_DATE_EPOCH});
+		$_non_binnmu_date_epoch = $non_binnmu_timestamp;
+		return;
+	}
+}
+
+# Setup the build ENV by setting dpkg-buildflags (via set_buildflags()) plus
+# cleaning up HOME (etc) in compat 13+
+sub setup_buildenv {
+	set_buildflags();
+	if (not compat(12)) {
+		setup_home_and_xdg_dirs();
+	}
+}
+
+sub setup_home_and_xdg_dirs {
+	require Cwd;
+	my $cwd = Cwd::getcwd();
+	my $home_dir = join('/', $cwd, generated_file('_source', 'home', 0));
+	my @paths = (
+		$home_dir,
+	);
+	my @clear_env = qw(
+		XDG_CACHE_HOME
+		XDG_CONFIG_DIRS
+		XDG_CONFIG_HOME
+		XDG_DATA_HOME
+		XDG_DATA_DIRS
+		XDG_RUNTIME_DIR
+	);
+	mkdirs(@paths);
+	for my $envname (@clear_env) {
+		delete($ENV{$envname});
+	}
+	$ENV{'HOME'} = $home_dir;
+	return;
+}
+
+sub reset_buildflags {
+	eval { require Dpkg::BuildFlags };
+	if ($@) {
+		warning "unable to load build flags: $@";
+		return;
+	}
+	delete($ENV{'DH_INTERNAL_BUILDFLAGS'});
+	my $buildflags = Dpkg::BuildFlags->new();
+	foreach my $flag ($buildflags->list()) {
+		next unless $flag =~ /^[A-Z]/; # Skip flags starting with lowercase
+		delete($ENV{$flag});
+	}
+}
+
+# Sets environment variables from dpkg-buildflags. Avoids changing
+# any existing environment variables.
+sub set_buildflags {
+	return if $ENV{DH_INTERNAL_BUILDFLAGS};
+	$ENV{DH_INTERNAL_BUILDFLAGS}=1;
+
+	# For the side effect of computing the SOURCE_DATE_EPOCH variable.
+	get_source_date_epoch();
+
+	return if compat(8);
+
+	# Export PERL_USE_UNSAFE_INC as a transitional step to allow us
+	# to remove . from @INC by default without breaking packages which
+	# rely on this [CVE-2016-1238]
+	$ENV{PERL_USE_UNSAFE_INC} = 1 if compat(10);
+
+	eval { require Dpkg::BuildFlags };
+	if ($@) {
+		warning "unable to load build flags: $@";
+		return;
+	}
+
+	my $buildflags = Dpkg::BuildFlags->new();
+	$buildflags->load_config();
+	foreach my $flag ($buildflags->list()) {
+		next unless $flag =~ /^[A-Z]/; # Skip flags starting with lowercase
+		if (! exists $ENV{$flag}) {
+			$ENV{$flag} = $buildflags->get($flag);
+		}
+	}
+}
+
+# Gets a DEB_BUILD_OPTIONS option, if set.
+sub get_buildoption {
+	my ($wanted, $default) = @_;
+
+	return $default if not exists($ENV{DEB_BUILD_OPTIONS});
+
+	foreach my $opt (split(/\s+/, $ENV{DEB_BUILD_OPTIONS})) {
+		# currently parallel= is the only one with a parameter
+		if ($opt =~ /^parallel=(-?\d+)$/ && $wanted eq 'parallel') {
+			return $1;
+		} elsif ($opt =~ m/^dherroron=(\S*)$/ && $wanted eq 'dherroron') {
+			my $value = $1;
+			if ($value ne 'obsolete-compat-levels') {
+				warning("Unknown value \"${value}\" as parameter for \"dherroron\" seen in DEB_BUILD_OPTIONS");
+			}
+			return $value;
+		} elsif ($opt eq $wanted) {
+			return 1;
+		}
+	}
+	return $default;
+}
+
+# Returns true if DEB_BUILD_PROFILES lists the given profile.
+sub is_build_profile_active {
+	my ($wanted) = @_;
+	return 0 if not exists($ENV{DEB_BUILD_PROFILES});
+	for my $prof (split(m/\s+/, $ENV{DEB_BUILD_PROFILES})) {
+		return 1 if $prof eq $wanted;
+	}
+	return 0;
+}
+
+
+# Called when an executable config file failed.  It provides a more helpful error message in
+# some cases (especially when the file was not intended to be executable).
+sub _executable_dh_config_file_failed {
+	my ($source, $err, $proc_err) = @_;
+	error("Error closing fd/process for ${source}: $err") if $err;
+	# The interpreter did not like the file for some reason.
+	# Lets check if the maintainer intended it to be
+	# executable.
+	if (not is_so_or_exec_elf_file($source) and not _has_shebang_line($source)) {
+		warning("${source} is marked executable but does not appear to an executable config.");
+		warning();
+		warning("If ${source} is intended to be an executable config file, please ensure it can");
+		warning("be run as a stand-alone script/program (e.g. \"./${source}\")");
+		warning("Otherwise, please remove the executable bit from the file (e.g. chmod -x \"${source}\")");
+		warning();
+		warning('Please see "Executable debhelper config files" in debhelper(7) for more information.');
+		warning();
+	}
+	$? = $proc_err;
+	error_exitcode("${source} (executable config)");
+	return;
+}
+
+
+# install a dh config file (e.g. debian/<pkg>.lintian-overrides) into
+# the package.  Under compat 9+ it may execute the file and use its
+# output instead.
+#
+# install_dh_config_file(SOURCE, TARGET)
+sub install_dh_config_file {
+	my ($source, $target) = @_;
+
+	if (!compat(8) and -x $source) {
+		my @sstat = stat(_) || error("cannot stat $source: $!");
+		open(my $tfd, '>', $target) || error("cannot open $target: $!");
+		chmod(0644, $tfd) || error("cannot chmod $target: $!");
+		open(my $sfd, '-|', $source) || error("cannot run $source: $!");
+		while (my $line = <$sfd>) {
+			print ${tfd} $line;
+		}
+		if (!close($sfd)) {
+			_executable_dh_config_file_failed($source, $!, $?);
+		}
+		close($tfd) || error("cannot close $target: $!");
+		# Set the mtime (and atime) to ensure reproducibility.
+		utime($sstat[9], $sstat[9], $target);
+	} else {
+		install_file($source, $target);
+	}
+	return 1;
+}
+
+sub restore_file_on_clean {
+	my ($file) = @_;
+	my $bucket_index = 'debian/.debhelper/bucket/index';
+	my $bucket_dir = 'debian/.debhelper/bucket/files';
+	my $checksum;
+	mkdirs($bucket_dir);
+	if ($file =~ m{^/}) {
+		error("restore_file_on_clean requires a path relative to the package dir");
+	}
+	$file =~ s{^\./}{}g;
+	$file =~ s{//++}{}g;
+	if ($file =~ m{^\.} or $file =~ m{/CVS/} or $file =~ m{/\.svn/}) {
+		# We do not want to smash a Vcs repository by accident.
+		warning("Attempt to store $file, which looks like a VCS file or");
+		warning("a hidden package file (like quilt's \".pc\" directory)");
+		error("This tool probably contains a bug.");
+	}
+	if (-l $file or not -f _) {
+		error("Cannot store $file: Can only store regular files (no symlinks, etc.)");
+	}
+	require Digest::SHA;
+
+	$checksum = Digest::SHA->new('256')->addfile($file, 'b')->hexdigest;
+
+	if (not $dh{NO_ACT}) {
+		my ($in_index);
+		open(my $fd, '+>>', $bucket_index)
+			or error("open($bucket_index, a+) failed: $!");
+		seek($fd, 0, 0);
+		while (my $line = <$fd>) {
+			my ($cs, $stored_file);
+			chomp($line);
+			($cs, $stored_file) = split(m/ /, $line, 2);
+			next if ($stored_file ne $file);
+			$in_index = 1;
+		}
+		if (not $in_index) {
+			# Copy and then rename so we always have the full copy of
+			# the file in the correct place (if any at all).
+			doit('cp', '-an', '--reflink=auto', $file, "${bucket_dir}/${checksum}.tmp");
+			rename_path("${bucket_dir}/${checksum}.tmp", "${bucket_dir}/${checksum}");
+			print {$fd} "${checksum} ${file}\n";
+		}
+		close($fd) or error("close($bucket_index) failed: $!");
+	}
+
+	return 1;
+}
+
+sub restore_all_files {
+	my ($clear_index) = @_;
+	my $bucket_index = 'debian/.debhelper/bucket/index';
+	my $bucket_dir = 'debian/.debhelper/bucket/files';
+
+	return if not -f $bucket_index;
+	open(my $fd, '<', $bucket_index)
+		or error("open($bucket_index) failed: $!");
+
+	while (my $line = <$fd>) {
+		my ($cs, $stored_file, $bucket_file);
+		chomp($line);
+		($cs, $stored_file) = split(m/ /, $line, 2);
+		$bucket_file = "${bucket_dir}/${cs}";
+		# Restore by copy and then rename.  This ensures that:
+		# 1) If dh_clean is interrupted, we can always do a full restore again
+		#    (otherwise, we would be missing some of the files and have to handle
+		#     that with scary warnings)
+		# 2) The file is always fully restored or in its "pre-restore" state.
+		doit('cp', '-an', '--reflink=auto', $bucket_file, "${bucket_file}.tmp");
+		rename_path("${bucket_file}.tmp", $stored_file);
+	}
+	close($fd);
+	rm_files($bucket_index) if $clear_index;
+	return;
+}
+
+sub open_gz {
+	my ($file) = @_;
+	my $fd;
+	eval {
+		require PerlIO::gzip;
+	};
+	if ($@) {
+		open($fd, '-|', 'gzip', '-dc', $file)
+		  or error("gzip -dc $file failed: $!");
+	} else {
+		# Pass ":unix" as well due to https://rt.cpan.org/Public/Bug/Display.html?id=114557
+		# Alternatively, we could ensure we always use "POSIX::_exit".  Unfortunately,
+		# loading POSIX is insanely slow.
+		open($fd, '<:unix:gzip', $file)
+		  or error("open $file [<:unix:gzip] failed: $!");
+	}
+	return $fd;
+}
+
+sub deprecated_functionality {
+	my ($warning_msg, $compat_removal, $removal_msg) = @_;
+	if (defined($compat_removal) and not compat($compat_removal - 1)) {
+		my $msg = $removal_msg // $warning_msg;
+		warning($msg);
+		error("This feature was removed in compat ${compat_removal}.");
+	} else {
+		warning($warning_msg);
+		warning("This feature will be removed in compat ${compat_removal}.")
+		  if defined($compat_removal);
+	}
+	return 1;
+}
+
+sub log_installed_files {
+	my ($package, @patterns) = @_;
+
+	return if $dh{NO_ACT};
+	my $tool = $TOOL_NAME;
+	if (ref($package) eq 'HASH') {
+		my $options = $package;
+		$tool = $options->{'tool_name'} // error('Missing mandatory "tool_name" option for log_installed_files');
+		$package = $options->{'package'} // error('Missing mandatory "package" option for log_installed_files');
+	}
+
+	my $log = generated_file($package, 'installed-by-' . $tool);
+	open(my $fh, '>>', $log) or error("open $log: $!");
+	for my $src (@patterns) {
+		print $fh "$src\n";
+	}
+	close($fh) or error("close $log: $!");
+
+	return 1;
+}
+
+use constant {
+	# The ELF header is at least 0x32 bytes (32bit); any filer shorter than that is not an ELF file
+	ELF_MIN_LENGTH => 0x32,
+	ELF_MAGIC => "\x7FELF",
+	ELF_ENDIAN_LE => 0x01,
+	ELF_ENDIAN_BE => 0x02,
+	ELF_TYPE_EXECUTABLE => 0x0002,
+	ELF_TYPE_SHARED_OBJECT => 0x0003,
+};
+
+sub is_so_or_exec_elf_file {
+	my ($file) = @_;
+	open(my $fd, '<:raw', $file) or error("open $file: $!");
+	my $buflen = 0;
+	my ($buf, $endian);
+	while ($buflen < ELF_MIN_LENGTH) {
+		my $r = read($fd, $buf, ELF_MIN_LENGTH - $buflen, $buflen) // error("read ($file): $!");
+		last if $r == 0; # EOF
+		$buflen += $r
+	}
+	close($fd);
+	return 0 if $buflen < ELF_MIN_LENGTH;
+
+	return 0 if substr($buf, 0x00, 4) ne ELF_MAGIC;
+	$endian = unpack('c', substr($buf, 0x05, 1));
+	my ($long_format, $short_format);
+
+	if ($endian == ELF_ENDIAN_BE) {
+		$long_format = 'N';
+		$short_format = 'n';
+	} elsif ($endian == ELF_ENDIAN_LE) {
+		$long_format = 'V';
+		$short_format = 'v';
+	} else {
+		return 0;
+	}
+	my $elf_version = substr($buf, 0x14, 4);
+	my $elf_type = substr($buf, 0x10, 2);
+
+
+	return 0 if unpack($long_format, $elf_version) != 0x00000001;
+	my $elf_type_unpacked = unpack($short_format, $elf_type);
+	return 0 if $elf_type_unpacked != ELF_TYPE_EXECUTABLE and $elf_type_unpacked != ELF_TYPE_SHARED_OBJECT;
+	return 1;
+}
+
+sub _has_shebang_line {
+	my ($file) = @_;
+	open(my $fd, '<', $file) or error("open $file: $!");
+	my $line = <$fd>;
+	close($fd);
+	return 1 if (defined($line) and substr($line, 0, 2) eq '#!');
+	return 0;
+}
+
+# Returns true iff the given argument is an empty directory.
+# Corner-cases:
+#  - false if not a directory
+sub is_empty_dir {
+	my ($dir) = @_;
+	return 0 if not -d $dir;
+	my $ret = 1;
+	opendir(my $dir_fd, $dir) or error("opendir($dir) failed: $!");
+	while (defined(my $entry = readdir($dir_fd))) {
+		next if $entry eq '.' or $entry eq '..';
+		$ret = 0;
+		last;
+	}
+	closedir($dir_fd);
+	return $ret;
+}
+
+sub on_pkgs_in_parallel(&) {
+	unshift(@_, $dh{DOPACKAGES});
+	goto \&on_items_in_parallel;
+}
+
+# Given a list of files, find all hardlinked files and return:
+# 1: a list of unique files (all files in the list are not hardlinked with any other file in that list)
+# 2: a map where the keys are names of hardlinks and the value points to the name selected as the file put in the
+#    list of unique files.
+#
+# This is can be used to relink hard links after modifying one of them.
+sub find_hardlinks {
+	my (@all_files) = @_;
+	my (%seen, %hardlinks, @unique_files);
+	for my $file (@all_files) {
+		my ($dev, $inode, undef, $nlink)=stat($file);
+		if (defined $nlink && $nlink > 1) {
+			if (! $seen{"$inode.$dev"}) {
+				$seen{"$inode.$dev"}=$file;
+				push(@unique_files, $file);
+			} else {
+				# This is a hardlink.
+				$hardlinks{$file}=$seen{"$inode.$dev"};
+			}
+		} else {
+			push(@unique_files, $file);
+		}
+	}
+	return (\@unique_files, \%hardlinks);
+}
+
+sub on_items_in_parallel {
+	my ($pkgs_ref, $code) = @_;
+	my @pkgs = @{$pkgs_ref};
+	my %pids;
+	my $parallel = $MAX_PROCS;
+	my $count_per_proc = int( (scalar(@pkgs) + $parallel - 1)/ $parallel);
+	my $exit = 0;
+	if ($count_per_proc < 1) {
+		$count_per_proc = 1;
+		if (@pkgs > 3) {
+			# Forking has a considerable overhead, so bulk the number
+			# a bit.  We do not do this unconditionally, because we
+			# want parallel issues (if any) to appear already with 2
+			# packages and two procs (because people are lazy when
+			# testing).
+			#
+			# Same reason for also unconditionally forking with 1 pkg
+			# in 1 proc.
+			$count_per_proc = 2;
+		}
+	}
+	# Assertion, $count_per_proc * $parallel >= scalar(@pkgs)
+	while (@pkgs) {
+		my @batch = splice(@pkgs, 0, $count_per_proc);
+		my $pid = fork() // error("fork: $!");
+		if (not $pid) {
+			# Child processes should not write to the log file
+			inhibit_log();
+			eval {
+				$code->(@batch);
+			};
+			if (my $err = $@) {
+				$err =~ s/\n$//;
+				print STDERR "$err\n";
+				exit(2);
+			}
+			exit(0);
+		}
+		$pids{$pid} = 1;
+	}
+	while (%pids) {
+		my $pid = wait;
+		error("wait() failed: $!") if $pid == -1;
+		delete($pids{$pid});
+		if ($? != 0) {
+			$exit = 1;
+		}
+	}
+	if ($exit) {
+		error("Aborting due to earlier error");
+	}
+	return;
+}
+
+*on_selected_pkgs_in_parallel = \&on_items_in_parallel;
+
+sub compute_doc_main_package {
+	my ($doc_package) = @_;
+	# if explicitly set, then choose that.
+	return $dh{DOC_MAIN_PACKAGE} if $dh{DOC_MAIN_PACKAGE};
+	# In compat 10 (and earlier), there is no auto-detection
+	return $doc_package if compat(10);
+	my $target_package = $doc_package;
+	# If it is not a -doc package, then docs should be installed
+	# under its own package name.
+	return $doc_package if $target_package !~ s/-doc$//;
+	# FOO-doc hosts the docs for FOO; seems reasonable
+	return $target_package if exists($package_types{$target_package});
+	if ($doc_package =~ m/^lib./) {
+		# Special case, "libFOO-doc" can host docs for "libFOO-dev"
+		my $lib_dev = "${target_package}-dev";
+		return $lib_dev if exists($package_types{$lib_dev});
+		# Technically, we could go look for a libFOO<something>-dev,
+		# but atm. it is presumed to be that much of a corner case
+		# that it warrents an override.
+	}
+	# We do not know; make that clear to the caller
+	return;
+}
+
+sub dbgsym_tmpdir {
+	my ($package) = @_;
+	return "debian/.debhelper/${package}/dbgsym-root";
+}
+
+sub perl_cross_incdir {
+	return if !is_cross_compiling();
+
+	# native builds don't currently need this so only load it on demand
+	require Config; Config->import();
+
+	my $triplet = dpkg_architecture_value("DEB_HOST_MULTIARCH");
+	my $perl_version = $Config::Config{version};
+	my $incdir = "/usr/lib/$triplet/perl/cross-config-${perl_version}";
+	return undef if !-e "$incdir/Config.pm";
+	return $incdir;
+}
+
+sub is_known_package {
+	my ($package) = @_;
+	state %known_packages = map { $_ => 1 } getpackages();
+	return 1 if exists($known_packages{$package});
+	return 0
+}
+
+sub assert_opt_is_known_package {
+	my ($package, $method) = @_;
+	if (not is_known_package($package)) {
+		error("Requested unknown package $package via $method, expected one of: " . join(' ', getpackages()));
+	}
+	return 1;
+}
+
+
+sub _internal_optional_file_args {
+	state $_disable_file_seccomp;
+	if (not defined($_disable_file_seccomp)) {
+		my $consider_disabling_seccomp = 0;
+		if ($ENV{'FAKEROOTKEY'} or ($ENV{'LD_PRELOAD'} // '') =~ m/fakeroot/) {
+			$consider_disabling_seccomp = 1;
+		}
+		if ($consider_disabling_seccomp) {
+			my $has_no_sandbox = (qx_cmd('file', '--help') // '') =~ m/--no-sandbox/;
+			$consider_disabling_seccomp = 0 if not $has_no_sandbox;
+		}
+		$_disable_file_seccomp = $consider_disabling_seccomp;
+	}
+	return('--no-sandbox') if $_disable_file_seccomp;
+	return;
+}
+
+1
diff --git a/lib/Debian/Debhelper/Sequence.pm b/lib/Debian/Debhelper/Sequence.pm
new file mode 100644
index 0000000..ba627f4
--- /dev/null
+++ b/lib/Debian/Debhelper/Sequence.pm
@@ -0,0 +1,131 @@
+#!/usr/bin/perl
+#
+# Internal library functions for the dh(1) command
+
+package Debian::Debhelper::Sequence;
+use strict;
+use warnings;
+
+use Exporter qw(import);
+
+use Debian::Debhelper::Dh_Lib qw(error);
+use Debian::Debhelper::SequencerUtil qw(extract_rules_target_name sequence_type	SEQUENCE_NO_SUBSEQUENCES
+	SEQUENCE_ARCH_INDEP_SUBSEQUENCES SEQUENCE_TYPE_ARCH_ONLY SEQUENCE_TYPE_INDEP_ONLY SEQUENCE_TYPE_BOTH
+	FLAG_OPT_SOURCE_BUILDS_NO_ARCH_PACKAGES	FLAG_OPT_SOURCE_BUILDS_NO_INDEP_PACKAGES);
+
+
+sub _as_command {
+	my ($input) = @_;
+	if (ref($input) eq 'HASH') {
+		return $input;
+	}
+	my $rules_target = extract_rules_target_name($input);
+	if (defined($rules_target)) {
+		my $sequence_type = sequence_type($rules_target);
+		return {
+			'command'             => $input,
+			'command-options'     => [],
+			'sequence-limitation' => $sequence_type,
+		}
+	}
+	return {
+		'command'             => $input,
+		'command-options'     => [],
+		'sequence-limitation' => SEQUENCE_TYPE_BOTH,
+	}
+}
+
+sub new {
+	my ($class, $name, $sequence_type, @cmds) = @_;
+	return bless({
+		'_name' => $name,
+		'_subsequences' => $sequence_type,
+		'_cmds' => [map {_as_command($_)} @cmds],
+	}, $class);
+}
+
+sub name {
+	my ($this) = @_;
+	return $this->{'_name'};
+}
+
+sub allowed_subsequences {
+	my ($this) = @_;
+	return $this->{'_subsequences'};
+}
+
+sub _insert {
+	my ($this, $offset, $existing, $new) = @_;
+	my @list = @{$this->{'_cmds'}};
+	my @new;
+	my $new_cmd = _as_command($new);
+	foreach my $command (@list) {
+		if ($command->{'command'} eq $existing) {
+			push(@new, $new_cmd) if $offset < 0;
+			push(@new, $command);
+			push(@new, $new_cmd) if $offset > 0;
+		} else {
+			push(@new, $command);
+		}
+	}
+	$this->{'_cmds'} = \@new;
+	return;
+}
+
+sub remove_command {
+	my ($this, $command) = @_;
+	$this->{'_cmds'} = [grep { $_->{'command'} ne $command } @{$this->{'_cmds'}}];
+	return;
+}
+
+sub add_command_at_start {
+	my ($this, $command) = @_;
+	unshift(@{$this->{'_cmds'}}, _as_command($command));
+	return;
+}
+
+sub add_command_at_end {
+	my ($this, $command) = @_;
+	push(@{$this->{'_cmds'}}, _as_command($command));
+	return;
+}
+
+sub rules_target_name {
+	my ($this, $sequence_type) = @_;
+	error("Internal error: Invalid sequence type $sequence_type") if $sequence_type eq SEQUENCE_NO_SUBSEQUENCES;
+	my $name = $this->{'_name'};
+	my $allowed_sequence_type = $this->{'_subsequences'};
+	if ($sequence_type ne SEQUENCE_TYPE_BOTH and $allowed_sequence_type eq SEQUENCE_NO_SUBSEQUENCES) {
+		error("Internal error: Requested subsequence ${sequence_type} of sequence ${name}, but it has no subsequences");
+	}
+	if ($sequence_type ne SEQUENCE_TYPE_BOTH) {
+		return "${name}-${sequence_type}";
+	}
+	return $name;
+}
+
+sub as_rules_target_command {
+	my ($this) = shift;
+	my $rules_name = $this->rules_target_name(@_);
+	return "debian/rules ${rules_name}";
+}
+
+sub flatten_sequence {
+	my ($this, $sequence_type, $flags) = @_;
+	error("Invalid sequence type $sequence_type") if $sequence_type eq SEQUENCE_NO_SUBSEQUENCES;
+	my @cmds;
+	for my $cmd_desc (@{$this->{'_cmds'}}) {
+		my $seq_limitation = $cmd_desc->{'sequence-limitation'};
+		next if ($seq_limitation eq SEQUENCE_TYPE_ARCH_ONLY and ($flags & FLAG_OPT_SOURCE_BUILDS_NO_ARCH_PACKAGES));
+		next if ($seq_limitation eq SEQUENCE_TYPE_INDEP_ONLY and ($flags & FLAG_OPT_SOURCE_BUILDS_NO_INDEP_PACKAGES));
+		if ($seq_limitation eq $sequence_type or $sequence_type eq SEQUENCE_TYPE_BOTH or $seq_limitation eq SEQUENCE_TYPE_BOTH) {
+			my $cmd = $cmd_desc->{'command'};
+			my @cmd_options = $cmd_desc->{'command-options'};
+			push(@cmds, [$cmd, @cmd_options]);
+			next;
+		}
+	}
+	return @cmds;
+}
+
+1;
diff --git a/lib/Debian/Debhelper/Sequence/build_stamp.pm b/lib/Debian/Debhelper/Sequence/build_stamp.pm
new file mode 100644
index 0000000..5c05975
--- /dev/null
+++ b/lib/Debian/Debhelper/Sequence/build_stamp.pm
@@ -0,0 +1,10 @@
+#!/usr/bin/perl
+
+use strict;
+use warnings;
+
+add_command_at_end('create-stamp debian/debhelper-build-stamp', 'build');
+add_command_at_end('create-stamp debian/debhelper-build-stamp', 'build-arch');
+add_command_at_end('create-stamp debian/debhelper-build-stamp', 'build-indep');
+
+1
diff --git a/lib/Debian/Debhelper/Sequence/dwz.pm b/lib/Debian/Debhelper/Sequence/dwz.pm
new file mode 100644
index 0000000..2e89ffa
--- /dev/null
+++ b/lib/Debian/Debhelper/Sequence/dwz.pm
@@ -0,0 +1,14 @@
+#!/usr/bin/perl
+# Enable dh_dwz
+
+use strict;
+use warnings;
+use Debian::Debhelper::Dh_Lib qw(compat error);
+
+if (not compat(11)) {
+	error("In compat 12, dh_dwz is run by default and the dwz-sequence is no longer required.");
+}
+
+insert_before('dh_strip', 'dh_dwz');
+
+1;
diff --git a/lib/Debian/Debhelper/Sequence/elf_tools.pm b/lib/Debian/Debhelper/Sequence/elf_tools.pm
new file mode 100644
index 0000000..56bb07c
--- /dev/null
+++ b/lib/Debian/Debhelper/Sequence/elf_tools.pm
@@ -0,0 +1,14 @@
+#!/usr/bin/perl
+
+use strict;
+use warnings;
+use Debian::Debhelper::Dh_Lib qw(compat);
+
+insert_after('dh_missing', 'dh_strip');
+if (not compat(11)) {
+	insert_before('dh_strip', 'dh_dwz');
+}
+insert_after('dh_strip', 'dh_makeshlibs');
+insert_after('dh_makeshlibs', 'dh_shlibdeps');
+
+1;
\ No newline at end of file
diff --git a/lib/Debian/Debhelper/Sequence/installinitramfs.pm b/lib/Debian/Debhelper/Sequence/installinitramfs.pm
new file mode 100644
index 0000000..365f283
--- /dev/null
+++ b/lib/Debian/Debhelper/Sequence/installinitramfs.pm
@@ -0,0 +1,14 @@
+#!/usr/bin/perl
+# Enable dh_installinitramfs
+
+use strict;
+use warnings;
+use Debian::Debhelper::Dh_Lib qw(compat error);
+
+if (not compat(11)) {
+	error("In compat 12, dh_installinitramfs is run by default and the installinitramfs-sequence is no longer required.");
+}
+
+insert_after('dh_installgsettings', 'dh_installinitramfs');
+
+1;
diff --git a/lib/Debian/Debhelper/Sequence/installsysusers.pm b/lib/Debian/Debhelper/Sequence/installsysusers.pm
new file mode 100644
index 0000000..47c38e5
--- /dev/null
+++ b/lib/Debian/Debhelper/Sequence/installsysusers.pm
@@ -0,0 +1,9 @@
+#!/usr/bin/perl
+# Enable dh_installsysusers
+
+use strict;
+use warnings;
+
+insert_after('dh_install', 'dh_installsysusers');
+
+1;
diff --git a/lib/Debian/Debhelper/Sequence/root_sequence.pm b/lib/Debian/Debhelper/Sequence/root_sequence.pm
new file mode 100644
index 0000000..45d908c
--- /dev/null
+++ b/lib/Debian/Debhelper/Sequence/root_sequence.pm
@@ -0,0 +1,120 @@
+use strict;
+use warnings;
+
+use Debian::Debhelper::Dh_Lib qw(compat);
+use Debian::Debhelper::SequencerUtil;
+
+my $include_if_compat_X_or_newer = sub {
+	my ($compat, @commands) = @_;
+	return if compat($compat - 1, 1);
+	return @commands;
+};
+
+my @obsolete_command = (
+	[13, $include_if_compat_X_or_newer->(11, 'dh_systemd_enable', 'dh_systemd_start')],
+	[14, 'dh_gconf'],
+);
+
+my @commands_controlled_by_deb_build_options = (
+	$include_if_compat_X_or_newer->(13, ['dh_auto_test', 'nocheck'], ['dh_dwz', 'nostrip'], ['dh_strip', 'nostrip']),
+);
+
+my @bd_minimal = qw{
+	dh_testdir
+};
+my @bd = (@bd_minimal, qw{
+	dh_update_autotools_config
+	dh_auto_configure
+	dh_auto_build
+	dh_auto_test
+});
+my @i = (qw{
+	dh_testroot
+	dh_prep
+	dh_installdirs
+	dh_auto_install
+
+	dh_install
+	dh_installdocs
+	dh_installchangelogs
+	dh_installexamples
+	dh_installman
+
+	dh_installcatalogs
+	dh_installcron
+	dh_installdebconf
+	dh_installemacsen
+	dh_installifupdown
+	dh_installinfo
+	dh_installinit
+},
+	$include_if_compat_X_or_newer->(14, 'dh_installsysusers'),
+	$include_if_compat_X_or_newer->(13, 'dh_installtmpfiles'),
+	$include_if_compat_X_or_newer->(11, 'dh_installsystemd'),
+	$include_if_compat_X_or_newer->(12, 'dh_installsystemduser'),
+qw{
+	dh_installmenu
+	dh_installmime
+	dh_installmodules
+	dh_installlogcheck
+	dh_installlogrotate
+	dh_installpam
+	dh_installppp
+	dh_installudev
+	dh_installgsettings
+},
+	(!compat(11) ? qw(dh_installinitramfs) : qw()),
+	(compat(13) ? qw(dh_installalternatives) : qw()),
+qw{
+	dh_bugfiles
+	dh_ucf
+	dh_lintian
+	dh_icons
+	dh_perl
+	dh_usrlocal
+
+	dh_link
+},
+	(!compat(13) ? qw(dh_installalternatives) : qw()),
+qw{
+	dh_installwm
+	dh_installxfonts
+	dh_strip_nondeterminism
+	dh_compress
+	dh_fixperms
+	dh_missing
+});
+
+# Looking for dh_dwz, dh_strip, dh_makeshlibs, dh_shlibdeps (et al)?  They are
+# in the elf-tools addon.
+my @b=qw{
+	dh_installdeb
+	dh_gencontrol
+	dh_md5sums
+	dh_builddeb
+};
+
+_add_sequence('build', SEQUENCE_ARCH_INDEP_SUBSEQUENCES, @bd);
+_add_sequence('install', SEQUENCE_ARCH_INDEP_SUBSEQUENCES, to_rules_target("build"), @i);
+_add_sequence('binary', SEQUENCE_ARCH_INDEP_SUBSEQUENCES, to_rules_target("install"), @b);
+_add_sequence('clean', SEQUENCE_NO_SUBSEQUENCES, @bd_minimal, qw{
+	dh_auto_clean
+	dh_clean
+});
+
+for my $obsolete_command_spec (@obsolete_command) {
+	my ($error_compat, @cmds) = @{$obsolete_command_spec};
+	for my $command (@cmds) {
+		declare_command_obsolete($error_compat, $command);
+	}
+}
+
+for my $entry (@commands_controlled_by_deb_build_options) {
+	my ($command, $dbo_flag) = @{$entry};
+	# Dear reader; Should you be in doubt, then this is internal API that is
+	# subject to change without notice.  If you need this feature, please
+	# make an explicit feature request, so we can implement a better solution.
+	_skip_cmd_if_deb_build_options_contains($command, $dbo_flag);
+}
+
+1;
diff --git a/lib/Debian/Debhelper/Sequence/single_binary.pm b/lib/Debian/Debhelper/Sequence/single_binary.pm
new file mode 100644
index 0000000..68d8db1
--- /dev/null
+++ b/lib/Debian/Debhelper/Sequence/single_binary.pm
@@ -0,0 +1,34 @@
+use strict;
+use warnings;
+
+use Debian::Debhelper::Dh_Lib qw(getpackages error warning tmpdir);
+use Debian::Debhelper::SequencerUtil;
+
+my @packages = getpackages();
+my $pkg = $packages[0];
+my $tmp = tmpdir($pkg);
+if (@packages != 1) {
+    warning('Detected multiple binary packages (Package paragraphs) in debian/control, which is incompatible');
+    warning('with the single-binary dh add-on.');
+    warning();
+    warning('Please:');
+    warning(' 1) Remove the single-binary add-on ("dh-sequence-single-binary" in Build-Depends)');
+    warning(' 2) Update the packaging to cope with dh_auto_install using \"debian/tmp\" as default dest dir');
+    warning("    (Previously, it would probably have used \"${tmp}\")");
+    warning(' 3) Add Breaks/Replaces if you are moving existing files into a new package.');
+    warning(' 4) Double check that the resulting binaries have content.');
+    warning();
+    warning("IF YOU ARE ADDING A TRANSITIONAL PACKAGE: Then you probably want to pass --destdir=${tmp} to");
+    warning('  dh_auto_install.  Most likely you will need Breaks + Replaces as renaming a package counts as');
+    warning('  moving files between two packages.');
+    warning();
+    warning('IF YOU ARE "SPLITTING" THE CONTENT INTO MULTIPLE PACKAGES: Then remember to install the content');
+    warning("  into them (by creating debian/${pkg}.install, etc.).  Also remember to add Breaks + Replaces if");
+    warning('  you are moving files from one package into another.');
+    warning();
+    error("The single-binary add-on cannot be used for source packages that build multiple binary packages.");
+}
+
+add_command_options('dh_auto_install', "--destdir=${tmp}/");
+
+1;
diff --git a/lib/Debian/Debhelper/Sequence/systemd.pm b/lib/Debian/Debhelper/Sequence/systemd.pm
new file mode 100644
index 0000000..484e764
--- /dev/null
+++ b/lib/Debian/Debhelper/Sequence/systemd.pm
@@ -0,0 +1,19 @@
+#!/usr/bin/perl
+use warnings;
+use strict;
+use Debian::Debhelper::Dh_Lib qw(compat error);
+
+if (not compat(10)) {
+       error("The systemd-sequence is no longer provided in compat >= 11, please rely on dh_installsystemd instead");
+}
+
+
+# dh_systemd_enable runs unconditionally, and before dh_installinit, so that
+# the latter can use invoke-rc.d and all symlinks are already in place.
+insert_before("dh_installinit", "dh_systemd_enable");
+
+# dh_systemd_start handles the case where there is no corresponding init
+# script, so it runs after dh_installinit.
+insert_after("dh_installinit", "dh_systemd_start");
+
+1
diff --git a/lib/Debian/Debhelper/SequencerUtil.pm b/lib/Debian/Debhelper/SequencerUtil.pm
new file mode 100644
index 0000000..2dc3f78
--- /dev/null
+++ b/lib/Debian/Debhelper/SequencerUtil.pm
@@ -0,0 +1,888 @@
+#!/usr/bin/perl
+#
+# Internal library functions for the dh(1) command
+
+package Debian::Debhelper::SequencerUtil;
+use strict;
+use warnings;
+use constant {
+	'DUMMY_TARGET'                             => 'debhelper-fail-me',
+	'SEQUENCE_NO_SUBSEQUENCES'                 => 'none',
+	'SEQUENCE_ARCH_INDEP_SUBSEQUENCES'         => 'both',
+	'SEQUENCE_TYPE_ARCH_ONLY'                  => 'arch',
+	'SEQUENCE_TYPE_INDEP_ONLY'                 => 'indep',
+	'SEQUENCE_TYPE_BOTH'                       => 'both',
+	'FLAG_OPT_SOURCE_BUILDS_NO_ARCH_PACKAGES'  => 0x1,
+	'FLAG_OPT_SOURCE_BUILDS_NO_INDEP_PACKAGES' => 0x2,
+	'UNSKIPPABLE_CLI_OPTIONS_BUILD_SYSTEM' => q(-S|--buildsystem|-D|--sourcedir|--sourcedirectory|-B|--builddir|--builddirectory),
+};
+
+use Exporter qw(import);
+
+use Debian::Debhelper::Dh_Lib qw(
+	%dh
+	basename
+	commit_override_log
+	compat error
+	escape_shell
+	get_buildoption
+	getpackages
+	load_log
+	package_is_arch_all
+    pkgfile
+	rm_files
+	tmpdir
+	warning
+	write_log
+);
+
+
+our @EXPORT = qw(
+	extract_rules_target_name
+	to_rules_target
+	sequence_type
+	unpack_sequence
+	rules_explicit_target
+	extract_skipinfo
+	compute_selected_addons
+	load_sequence_addon
+	run_sequence_command_and_exit_on_failure
+	should_skip_due_to_dpo
+	check_for_obsolete_commands
+	compute_starting_point_in_sequences
+	parse_dh_cmd_options
+	run_hook_target
+	run_through_command_sequence
+	DUMMY_TARGET
+	SEQUENCE_NO_SUBSEQUENCES
+	SEQUENCE_ARCH_INDEP_SUBSEQUENCES
+	SEQUENCE_TYPE_ARCH_ONLY
+	SEQUENCE_TYPE_INDEP_ONLY
+	SEQUENCE_TYPE_BOTH
+	FLAG_OPT_SOURCE_BUILDS_NO_ARCH_PACKAGES
+	FLAG_OPT_SOURCE_BUILDS_NO_INDEP_PACKAGES
+);
+
+our (%EXPLICIT_TARGETS, $RULES_PARSED);
+
+sub extract_rules_target_name {
+	my ($command) = @_;
+	if ($command =~ m{^debian/rules\s++(.++)}) {
+		return $1
+	}
+	return;
+}
+
+sub to_rules_target  {
+	return 'debian/rules '.join(' ', @_);
+}
+
+sub sequence_type {
+	my ($sequence_name) = @_;
+	if ($sequence_name =~ m/-indep$/) {
+		return 'indep';
+	} elsif ($sequence_name =~ m/-arch$/) {
+		return 'arch';
+	}
+	return 'both';
+}
+
+sub _agg_subseq {
+	my ($current_subseq, $outer_subseq) = @_;
+	if ($current_subseq eq $outer_subseq) {
+		return $current_subseq;
+	}
+	if ($current_subseq eq 'both') {
+		return $outer_subseq;
+	}
+	return $current_subseq;
+}
+
+sub unpack_sequence {
+	my ($sequences, $sequence_name, $always_inline, $completed_sequences, $flags) = @_;
+	my (@sequence, @targets, %seen, %non_inlineable_targets, @stack);
+	my $sequence_type = sequence_type($sequence_name);
+	# Walk through the sequence effectively doing a DFS of the rules targets
+	# (when we are allowed to inline them).
+	my $seq = $sequences->{$sequence_name};
+	$flags //= 0;
+
+	push(@stack, [$seq->flatten_sequence($sequence_type, $flags)]);
+	while (@stack) {
+		my $current_sequence = pop(@stack);
+	  COMMAND:
+		while (@{$current_sequence}) {
+			my $command = shift(@{$current_sequence});
+			if (ref($command) eq 'ARRAY') {
+				$command = $command->[0];
+			}
+			my $rules_target=extract_rules_target_name($command);
+			next if (defined($rules_target) and exists($completed_sequences->{$rules_target}));
+			if (defined($rules_target) and $always_inline) {
+				my $subsequence = $sequences->{$rules_target};
+				my $subseq_type = _agg_subseq(sequence_type($rules_target), $sequence_type);
+				push(@stack, $current_sequence);
+				$current_sequence = [$subsequence->flatten_sequence($subseq_type, $flags)];
+			} elsif (defined($rules_target)) {
+				my $subsequence = $sequences->{$rules_target};
+				my $subseq_type = _agg_subseq(sequence_type($rules_target), $sequence_type);
+				my @subseq_types = ($subseq_type);
+				my %subtarget_status;
+				my ($transparent_subseq, $opaque_subseq, $subtarget_decided_both);
+				if ($subseq_type eq SEQUENCE_TYPE_BOTH) {
+					push(@subseq_types, SEQUENCE_TYPE_ARCH_ONLY, SEQUENCE_TYPE_INDEP_ONLY);
+				}
+				for my $ss_type (@subseq_types) {
+					my $full_rule_target = ($ss_type eq SEQUENCE_TYPE_BOTH) ? $rules_target : "${rules_target}-${ss_type}";
+					if (exists($completed_sequences->{$full_rule_target})) {
+						$subtarget_status{$ss_type} = 'complete';
+						last if $ss_type eq $subseq_type;
+					}
+					elsif (defined(rules_explicit_target($full_rule_target))) {
+						$subtarget_status{$ss_type} = 'opaque';
+						last if $ss_type eq $subseq_type;
+					}
+					else {
+						$subtarget_status{$ss_type} = 'transparent';
+					}
+				}
+				# At this point, %subtarget_status has 1 or 3 kv-pairs.
+				# - If it has 1, then just check that and be done
+				# - If it has 3, then "both" must be "transparent".
+
+				if (scalar(keys(%subtarget_status)) == 3) {
+					if ($subtarget_status{${\SEQUENCE_TYPE_ARCH_ONLY}} eq $subtarget_status{${\SEQUENCE_TYPE_INDEP_ONLY}}) {
+						# The "both" target is transparent and the subtargets agree.  This is the common case
+						# of "everything is transparent" (or both subtargets are opaque) and we reduce that by
+						# reducing it to only have one key.
+						%subtarget_status = ( $subseq_type => $subtarget_status{${\SEQUENCE_TYPE_ARCH_ONLY}} );
+						# There is one special-case for this flow if both targets are opaque.
+						$subtarget_decided_both = 1;
+					} else {
+						# The subtargets have different status but we know that the "both" key must be irrelevant
+						# then.  Remove it to simplify matters below.
+						delete($subtarget_status{${\SEQUENCE_TYPE_BOTH}});
+					}
+				}
+
+				if (scalar(keys(%subtarget_status)) == 1) {
+					# "Simple" case where we only have to check exactly one result
+					if ($subtarget_status{$subseq_type} eq 'opaque') {
+						$opaque_subseq = $subseq_type;
+					}
+					elsif ($subtarget_status{$subseq_type} eq 'transparent') {
+						$transparent_subseq = $subseq_type;
+					}
+				} else {
+					# Either can be transparent, opaque or complete at this point.
+					if ($subtarget_status{${\SEQUENCE_TYPE_ARCH_ONLY}} eq 'transparent') {
+						$transparent_subseq = SEQUENCE_TYPE_ARCH_ONLY
+					} elsif ($subtarget_status{${\SEQUENCE_TYPE_INDEP_ONLY}}  eq 'transparent') {
+						$transparent_subseq = SEQUENCE_TYPE_INDEP_ONLY
+					}
+					if ($subtarget_status{${\SEQUENCE_TYPE_ARCH_ONLY}} eq 'opaque') {
+						$opaque_subseq = SEQUENCE_TYPE_ARCH_ONLY
+					} elsif ($subtarget_status{${\SEQUENCE_TYPE_INDEP_ONLY}}  eq 'opaque') {
+						$opaque_subseq = SEQUENCE_TYPE_INDEP_ONLY
+					}
+				}
+				if ($opaque_subseq) {
+					if ($subtarget_decided_both) {
+						# Final special-case - we are here because the rules file define X-arch AND X-indep but
+						# not X.  In this case, we want two d/rules X-{arch,indep} calls rather than a single
+						# d/rules X call.
+						for my $ss_type ((SEQUENCE_TYPE_ARCH_ONLY, SEQUENCE_TYPE_INDEP_ONLY)) {
+							my $rules_target_cmd = $subsequence->as_rules_target_command($ss_type);
+							push(@targets, $rules_target_cmd) if not $seen{$rules_target_cmd}++;
+						}
+					} else {
+						my $rules_target_cmd = $subsequence->as_rules_target_command($opaque_subseq);
+						push(@targets, $rules_target_cmd) if not $seen{$rules_target_cmd}++;
+					}
+				}
+				if ($transparent_subseq) {
+					push(@stack, $current_sequence);
+					$current_sequence = [$subsequence->flatten_sequence($transparent_subseq, $flags)];
+				}
+				next COMMAND;
+			} else {
+				if (defined($rules_target) and not $always_inline) {
+					next COMMAND if exists($non_inlineable_targets{$rules_target});
+					push(@targets, $command) if not $seen{$command}++;
+				} elsif (! $seen{$command}) {
+					$seen{$command} = 1;
+					push(@sequence, $command);
+				}
+			}
+		}
+	}
+	return (\@targets, \@sequence);
+}
+
+
+sub rules_explicit_target {
+	# Checks if a specified target exists as an explicit target
+	# in debian/rules.
+	# undef is returned if target does not exist, 0 if target is noop
+	# and 1 if target has dependencies or executes commands.
+	my ($target) = @_;
+
+	if (! $RULES_PARSED) {
+		my $processing_targets = 0;
+		my $not_a_target = 0;
+		my $current_target;
+		open(MAKE, "LC_ALL=C make -Rrnpsf debian/rules ${\DUMMY_TARGET} 2>/dev/null |");
+		while (<MAKE>) {
+			if ($processing_targets) {
+				if (/^# Not a target:/) {
+					$not_a_target = 1;
+				} else {
+					if (!$not_a_target && m/^([^#:]+)::?\s*(.*)$/) {
+						# Target is defined. NOTE: if it is a dependency of
+						# .PHONY it will be defined too but that's ok.
+						# $2 contains target dependencies if any.
+						$current_target = $1;
+						$EXPLICIT_TARGETS{$current_target} = ($2) ? 1 : 0;
+					} else {
+						if (defined($current_target)) {
+							if (m/^#/) {
+								# Check if target has commands to execute
+								if (m/^#\s*(commands|recipe) to execute/) {
+									$EXPLICIT_TARGETS{$current_target} = 1;
+								}
+							} else {
+								# Target parsed.
+								$current_target = undef;
+							}
+						}
+					}
+					# "Not a target:" is always followed by
+					# a target name, so resetting this one
+					# here is safe.
+					$not_a_target = 0;
+				}
+			} elsif (m/^# Files$/) {
+				$processing_targets = 1;
+			}
+		}
+		close MAKE;
+		$RULES_PARSED = 1;
+	}
+
+	return $EXPLICIT_TARGETS{$target};
+}
+
+sub extract_skipinfo {
+	my ($command) = @_;
+
+	foreach my $dir (split(':', $ENV{PATH})) {
+		if (open (my $h, "<", "$dir/$command")) {
+			while (<$h>) {
+				if (m/PROMISE: DH NOOP( WITHOUT\s+(.*))?\s*$/) {
+					close $h;
+					return split(' ', $2) if defined($2);
+					return ('always-skip');
+				}
+			}
+			close $h;
+			return;
+		}
+	}
+	return;
+}
+
+sub _skipped_call_due_dpo {
+	my ($command, $dbo_flag) = @_;
+	my $me = Debian::Debhelper::Dh_Lib::_color(basename($0), 'bold');
+	my $skipped = Debian::Debhelper::Dh_Lib::_color('command-omitted', 'yellow');
+	print "${me}: ${skipped}: The call to \"${command}\" was omitted due to \"DEB_BUILD_OPTIONS=${dbo_flag}\"\n";
+	return;
+}
+
+sub should_skip_due_to_dpo {
+	my ($command, $to_be_invoked) = @_;
+
+	# Indirection/reference for readability
+	my $commands_ref = \%Debian::Debhelper::DH::SequenceState::commands_skippable_via_deb_build_options;
+
+	if (not $dh{'NO_ACT'} and exists($commands_ref->{$command})) {
+		my $flags_ref = $commands_ref->{$command};
+		for my $flag (@{$flags_ref}) {
+			if (get_buildoption($flag)) {
+				_skipped_call_due_dpo($to_be_invoked, $flag) if defined($to_be_invoked);
+				return 1;
+			}
+		}
+	}
+	return 0;
+}
+
+sub compute_starting_point_in_sequences {
+	my ($packages_ref, $full_sequence, $logged) = @_;
+	my %startpoint;
+	if (compat(9)) {
+		foreach my $package (@{$packages_ref}) {
+			my @log = load_log($package, $logged);
+			# Find the last logged command that is in the sequence, and
+			# continue with the next command after it. If no logged
+			# command is in the sequence, we're starting at the beginning..
+			$startpoint{$package} = 0;
+			COMMAND:
+			foreach my $command (reverse(@log)) {
+				foreach my $i (0 .. $#{$full_sequence}) {
+					if ($command eq $full_sequence->[$i]) {
+						$startpoint{$package} = $i + 1;
+						last COMMAND;
+					}
+				}
+			}
+		}
+	} else {
+		foreach my $package (@{$packages_ref}) {
+			$startpoint{$package} = 0;
+		}
+	}
+	return %startpoint;
+}
+
+
+sub compute_selected_addons {
+	my ($sequence_name, @addon_requests_from_args) = @_;
+	my (@enabled_addons, %disabled_addons, %enabled);
+	my @addon_requests;
+	my $sequence_type = sequence_type($sequence_name);
+
+	my %addon_constraints = %{ Debian::Debhelper::Dh_Lib::bd_dh_sequences() };
+	my %explicitly_managed;
+
+	# Inject elf-tools early as other addons rely on their presence and it historically
+	# has been considered a part of the "core" sequence.
+	if (exists($addon_constraints{'elf-tools'})) {
+		# Explicitly requested; respect that
+		push(@addon_requests, '+elf-tools');
+	} elsif (compat(12, 1)) {
+		# In compat 12 and earlier, we only inject the sequence if there are arch
+		# packages present and the sequence requires it.
+		if (getpackages('arch') and $sequence_type ne SEQUENCE_TYPE_INDEP_ONLY) {
+			push(@addon_requests, '+elf-tools');
+		}
+	} else {
+		# In compat 13, we always inject the addon if not explicitly requested and
+		# then flag it as arch_only
+		push(@addon_requests, '+elf-tools');
+		$addon_constraints{'elf-tools'} = SEQUENCE_TYPE_ARCH_ONLY if not exists($addon_constraints{'elf-tools'});
+	}
+
+	# Order is important; DH_EXTRA_ADDONS must come before everything
+	# else; then comes built-in and finally argument provided add-ons
+	# requests.
+	push(@addon_requests,  map { "+${_}" } split(",", $ENV{DH_EXTRA_ADDONS}))
+		if $ENV{DH_EXTRA_ADDONS};
+	if (not compat(9, 1)) {
+		# Enable autoreconf'ing by default in compat 10 or later.
+		push(@addon_requests, '+autoreconf');
+
+		# Enable systemd support by default in compat 10 or later.
+		# - compat 11 injects the dh_installsystemd tool directly in the
+		#   sequence instead of using a --with sequence.
+		push(@addon_requests, '+systemd') if compat(10, 1);
+		push(@addon_requests, '+build-stamp');
+	}
+	for my $addon_name (sort(keys(%addon_constraints))) {
+		my $addon_type = $addon_constraints{$addon_name};
+
+		# Special-case for the "clean" target to avoid B-D-I dependencies in that for conditional add-ons
+		next if $sequence_name eq 'clean' and $addon_type ne SEQUENCE_TYPE_BOTH;
+		if ($addon_type eq 'both' or $sequence_type eq 'both' or $addon_type eq $sequence_type) {
+			push(@addon_requests, "+${addon_name}");
+		}
+	}
+
+	push(@addon_requests, @addon_requests_from_args);
+
+	# Removing disabled add-ons are expensive (O(N) per time), so we
+	# attempt to make removals in bulk.  Note that we have to be order
+	# preserving (due to #885580), so there is a limit to how "smart"
+	# we can be.
+	my $flush_disable_cache = sub {
+		@enabled_addons = grep { not exists($disabled_addons{$_}) } @enabled_addons;
+		for my $addon (keys(%disabled_addons)) {
+			delete($enabled{$addon});
+		}
+		%disabled_addons = ();
+	};
+
+	for my $request (@addon_requests) {
+		if ($request =~ m/^[+-]root[-_]sequence$/) {
+			error("Invalid request to skip the sequence \"root-sequence\": It cannot be disabled")
+				if $request =~ m/^-/;
+			error("Invalid request to load the sequence \"root-sequence\": Do not reference it directly");
+		}
+		if ($request =~ s/^[+]//) {
+			# Normalize "_" to "-" in the name.
+			$request =~ tr/_/-/;
+			$flush_disable_cache->() if %disabled_addons;
+			$explicitly_managed{$request} = 1;
+			push(@enabled_addons, $request) if not $enabled{$request}++;
+		} elsif ($request =~ s/^-//) {
+			# Normalize "_" to "-" in the name.
+			$request =~ tr/_/-/;
+			$explicitly_managed{$request} = 1;
+			$disabled_addons{$request} = 1;
+		} else {
+			error("Internal error: Invalid add-on request: $request (Missing +/- prefix)");
+		}
+	}
+
+	if (compat(14, 1) && getpackages() == 1 && !exists($explicitly_managed{'single-binary'})) {
+		if (not compat(13, 1)) {
+			warning("Implicitly activating single-binary dh addon for backwards compatibility.  In compat 14+,");
+			warning("this fallback will *not* happen automatically and dh_auto_install will instead use a");
+			warning("different default for --destdir, which can cause the source to produce an empty binary package");
+			warning();
+			warning('To keep the existing behaviour, please activate the single-binary addon explicitly.');
+			warning('This can be done by adding "dh-sequence-single-binary" to Build-Depends or passing');
+			warning('--with=single-binary to dh.');
+			warning();
+			warning('If you have solved this issue differently (e.g., by passing --destdir explicitly to');
+			warning('dh_auto_install or not using dh_auto_install at all) and want to silence this warning');
+			warning('without activating the addon, you can do that by passing --without=single-binary to dh');
+			warning('to explicitly acknowledge the change.');
+			warning();
+			warning('Please see the description of the "single-binary" in "man dh" for more details of what');
+			warning('it does and why this is changing from implicit behaviour to explicitly opt-in.');
+		}
+		push(@enabled_addons, 'single-binary');
+	}
+
+	$flush_disable_cache->() if %disabled_addons;
+	return map {
+		{
+			'name' => $_,
+			'addon-type' => $addon_constraints{$_} // SEQUENCE_TYPE_BOTH,
+		}
+	} @enabled_addons;
+}
+
+
+sub load_sequence_addon {
+	my ($addon_name, $addon_type) = @_;
+	require Debian::Debhelper::DH::AddonAPI;
+	my $mod="Debian::Debhelper::Sequence::${addon_name}";
+	$mod=~s/-/_/g;
+	local $Debian::Debhelper::DH::AddonAPI::DH_INTERNAL_ADDON_NAME = $addon_name;
+	local $Debian::Debhelper::DH::AddonAPI::DH_INTERNAL_ADDON_TYPE = $addon_type;
+	eval "package Debian::Debhelper::DH::AddonAPI; use $mod";
+	if ($@) {
+		error("unable to load addon ${addon_name}: $@");
+	}
+}
+
+sub check_for_obsolete_commands {
+	my ($full_sequence) = @_;
+	my ($found_obsolete_targets, $min_compat);
+	for my $command (@{$full_sequence}) {
+		if (exists($Debian::Debhelper::DH::SequenceState::obsolete_command{$command})) {
+			my $addon_name = $Debian::Debhelper::DH::SequenceState::obsolete_command{$command}[1];
+			error("The addon ${addon_name} claimed that $command was obsolete, but it is not!?");
+		}
+	}
+	for my $command (sort(keys(%Debian::Debhelper::DH::SequenceState::obsolete_command))) {
+		my ($addon_name, $error_compat) = @{$Debian::Debhelper::DH::SequenceState::obsolete_command{$command}};
+		$addon_name = 'debhelper' if $addon_name eq 'root-sequence';
+		for my $prefix (qw(execute_before_ execute_after_ override_)) {
+			for my $suffix ('', '-arch', '-indep') {
+				my $target = "${prefix}${command}${suffix}";
+				if (defined(rules_explicit_target($target))) {
+					$found_obsolete_targets = 1;
+					$min_compat //= $error_compat;
+					$min_compat = $error_compat if $error_compat < $min_compat;
+					warning("The target ${target} references a now obsolete command and will not be run!"
+							. " (Marked by ${addon_name}, will be an error in compat $error_compat)");
+				}
+			}
+		}
+	}
+	if ($found_obsolete_targets and not compat($min_compat - 1)) {
+		error("Aborting due to left over override/hook targets for now removed commands.");
+	}
+	return;
+}
+
+sub run_sequence_command_and_exit_on_failure {
+	my ($command, @options) = @_;
+
+	# 3 space indent lines the command being run up under the
+	# sequence name after "dh ".
+	if (!$dh{QUIET}) {
+		print "   ".escape_shell($command, @options)."\n";
+	}
+
+	return if $dh{NO_ACT};
+
+	my $ret=system { $command } $command, @options;
+	if ($ret >> 8 != 0) {
+		exit $ret >> 8;
+	}
+	if ($ret) {
+		exit 1;
+	}
+	return;
+}
+
+
+sub run_hook_target {
+	my ($target_stem, $min_compat_level, $command, $packages, @opts) = @_;
+	my @todo = @{$packages};
+	foreach my $override_type (undef, "arch", "indep") {
+		@todo = _run_injected_rules_target($target_stem, $override_type, $min_compat_level, $command, \@todo, @opts);
+	}
+	return @todo;
+}
+
+# Tries to run an override / hook target for a command. Returns the list of
+# packages that it was unable to run the target for.
+sub _run_injected_rules_target {
+	my ($target_stem, $override_type, $min_compat_level, $command, $packages, @options) = @_;
+
+	my $rules_target = $target_stem .
+		(defined $override_type ? "-".$override_type : "");
+
+	$command //= $rules_target;  # Ensure it is defined
+
+	# Check which packages are of the right architecture for the
+	# override_type.
+	my (@todo, @rest);
+	my $has_explicit_target = rules_explicit_target($rules_target);
+
+	if ($has_explicit_target and defined($min_compat_level) and compat($min_compat_level - 1)) {
+		error("Hook target ${rules_target} is only supported in compat ${min_compat_level} or later");
+	}
+
+	if (defined $override_type) {
+		foreach my $package (@{$packages}) {
+			my $isall=package_is_arch_all($package);
+			if (($override_type eq 'indep' && $isall) ||
+				($override_type eq 'arch' && !$isall)) {
+				push @todo, $package;
+			} else {
+				push @rest, $package;
+				push @options, "-N$package";
+			}
+		}
+	} else {
+		@todo=@{$packages};
+	}
+
+	return @{$packages} unless defined $has_explicit_target; # no such override
+	return @rest if ! $has_explicit_target; # has empty override
+	return @rest unless @todo; # has override, but no packages to act on
+	return @rest if should_skip_due_to_dpo($command, "debian/rules $rules_target");
+
+	if (defined $override_type) {
+		# Ensure appropriate -a or -i option is passed when running
+		# an arch-specific override target.
+		my $opt=$override_type eq "arch" ? "-a" : "-i";
+		push @options, $opt unless grep { $_ eq $opt } @options;
+	}
+
+	# Discard any override log files before calling the override
+	# target
+	if (not compat(9)) {
+		my @files = glob('debian/*.debhelper.log');
+		rm_files(@files) if @files;
+	}
+	# This passes the options through to commands called
+	# inside the target.
+	$ENV{DH_INTERNAL_OPTIONS}=join("\x1e", @options);
+	$ENV{DH_INTERNAL_OVERRIDE}=$command;
+	run_sequence_command_and_exit_on_failure("debian/rules", $rules_target);
+	delete $ENV{DH_INTERNAL_OPTIONS};
+	delete $ENV{DH_INTERNAL_OVERRIDE};
+
+	# Update log for overridden command now that it has
+	# finished successfully.
+	# (But avoid logging for dh_clean since it removes
+	# the log earlier.)
+	if (! $dh{NO_ACT} && $command ne 'dh_clean' && compat(9)) {
+		write_log($command, @todo);
+		commit_override_log(@todo);
+	}
+
+	# Override targets may introduce new helper files.  Strictly
+	# speaking this *shouldn't* be necessary, but lets make no
+	# assumptions.
+	Debian::Debhelper::Dh_Lib::dh_clear_unsafe_cache();
+
+	return @rest;
+}
+
+
+# Options parsed to dh that may need to be passed on to helpers
+sub parse_dh_cmd_options {
+	my (@argv) = @_;
+
+	# Ref for readability
+	my $options_ref = \@Debian::Debhelper::DH::SequenceState::options;
+
+	while (@argv) {
+		my $opt = shift(@argv);
+		if ($opt =~ /^--?(after|until|before|with|without)$/) {
+			shift(@argv);
+			next;
+		} elsif ($opt =~ /^--?(no-act|remaining|(after|until|before|with|without)=)/) {
+			next;
+		} elsif ($opt =~ /^-/) {
+			if (not @{$options_ref} and $opt eq '--parallel' or $opt eq '--no-parallel') {
+				my $max_parallel;
+				# Ignore the option if it is the default for the given
+				# compat level.
+				next if compat(9) and $opt eq '--no-parallel';
+				next if not compat(9) and $opt eq '--parallel';
+				# Having an non-empty "@options" hurts performance quite a
+				# bit.  At the same time, we want to promote the use of
+				# --(no-)parallel, so "tweak" the options a bit if there
+				# is no reason to include this option.
+				$max_parallel = get_buildoption('parallel') // 1;
+				next if $max_parallel == 1;
+			}
+			if ($opt =~ m/^(--[^=]++)(?:=.*)?$/ or $opt =~ m/^(-[^-])(?:=.*)?$/) {
+				my $optname = $1;
+				if (length($optname) > 2 and (compat(12, 1) or $optname =~ m/^-[^-][^=]/)) {
+					# We cannot optimize bundled options but we can optimize a single
+					# short option with an explicit parameter (-B=F is ok, -BF is not)
+					# In compat 12 or earlier, we also punt on long options due to
+					# auto-abbreviation.
+					$Debian::Debhelper::DH::SequenceState::unoptimizable_option_bundle = 1
+				}
+				$Debian::Debhelper::DH::SequenceState::seen_options{$optname} = 1;
+			} elsif ($opt =~ m/^-[^-][^-]/) {
+				# We cannot optimize bundled options but we can optimize a single
+				# short option with an explicit parameter (-B=F is ok, -BF is not)
+				$Debian::Debhelper::DH::SequenceState::unoptimizable_option_bundle = 1
+			} else {
+				# Special case that disables NOOP cli-options() as well
+				$Debian::Debhelper::DH::SequenceState::unoptimizable_user_option = 1;
+			}
+			push(@{$options_ref}, "-O" . $opt);
+		} elsif (@{$options_ref}) {
+			if ($options_ref->[$#{$options_ref}] =~ /^-O--/) {
+				$options_ref->[$#{$options_ref}] .= '=' . $opt;
+			} else {
+				# Special case that disables NOOP cli-options() as well
+				$Debian::Debhelper::DH::SequenceState::unoptimizable_user_option = 1;
+				$options_ref->[$#{$options_ref}] .= $opt;
+			}
+		} else {
+			error("Unknown parameter: $opt");
+		}
+	}
+	return;
+}
+
+
+sub run_through_command_sequence {
+	my ($full_sequence, $startpoint, $logged, $options, $all_packages, $arch_packages, $indep_packages) = @_;
+
+	my $command_opts = \%Debian::Debhelper::DH::SequenceState::command_opts;
+	my $stoppoint = $#{$full_sequence};
+
+	# Now run the commands in the sequence.
+	foreach my $i (0 .. $stoppoint) {
+		my $command = $full_sequence->[$i];
+
+		# Figure out which packages need to run this command.
+		my (@todo, @opts);
+		my @filtered_packages = _active_packages_for_command($command, $all_packages, $arch_packages, $indep_packages);
+
+		foreach my $package (@filtered_packages) {
+			if (($startpoint->{$package}//0) > $i ||
+				$logged->{$package}{$full_sequence->[$i]}) {
+				push(@opts, "-N$package");
+			}
+			else {
+				push(@todo, $package);
+			}
+		}
+		next unless @todo;
+		push(@opts, @{$options});
+
+		my $rules_target = extract_rules_target_name($command);
+		error("Internal error: $command is a rules target, but it is not supported to be!?") if defined($rules_target);
+
+		if (my $stamp_file = _stamp_target($command)) {
+			my %seen;
+			print "   create-stamp " . escape_shell($stamp_file) . "\n";
+
+			next if $dh{NO_ACT};
+			open(my $fd, '+>>', $stamp_file) or error("open($stamp_file, rw) failed: $!");
+			# Seek to the beginning
+			seek($fd, 0, 0) or error("seek($stamp_file) failed: $!");
+			while (my $line = <$fd>) {
+				chomp($line);
+				$seen{$line} = 1;
+			}
+			for my $pkg (grep {not exists($seen{$_})} @todo) {
+				print {$fd} "$pkg\n";
+			}
+			close($fd) or error("close($stamp_file) failed: $!");
+			next;
+		}
+
+		my @full_todo = @todo;
+		run_hook_target("execute_before_${command}", 10, $command, \@full_todo, @opts);
+
+		# Check for override targets in debian/rules, and run instead of
+		# the usual command. (The non-arch-specific override is tried first,
+		# for simplest semantics; mixing it with arch-specific overrides
+		# makes little sense.)
+		@todo = run_hook_target("override_${command}", undef, $command, \@full_todo, @opts);
+
+		if (@todo and not _can_skip_command($command, @todo)) {
+			# No need to run the command for any packages handled by the
+			# override targets.
+			my %todo = map {$_ => 1} @todo;
+			foreach my $package (@full_todo) {
+				if (!$todo{$package}) {
+					push @opts, "-N$package";
+				}
+			}
+			if (not should_skip_due_to_dpo($command, Debian::Debhelper::Dh_Lib::_format_cmdline($command, @opts))) {
+				my @cmd_options;
+				# Include additional command options if any
+				push(@cmd_options, @{$command_opts->{$command}})
+					if exists($command_opts->{$command});
+				push(@cmd_options, @opts);
+				run_sequence_command_and_exit_on_failure($command, _remove_dup_pkg_options(@cmd_options));
+			}
+		}
+
+		run_hook_target("execute_after_${command}", 10, $command, \@full_todo, @opts);
+	}
+}
+
+sub _remove_dup_pkg_options {
+	my (@options) = @_;
+	my @filtered_options;
+	my $arch = 0;
+	my $indep = 0;
+	for my $option (@options) {
+		if ($option eq '-a' or $option eq '--arch') {
+			next if $arch;
+			$arch = 1;
+		}
+		if ($option eq '-i' or $option eq '--indep') {
+			next if $indep;
+			$indep = 1;
+		}
+		push(@filtered_options, $option);
+	}
+	return @filtered_options;
+}
+
+
+sub _stamp_target {
+	my ($command) = @_;
+	if ($command =~ s/^create-stamp\s+//) {
+		return $command;
+	}
+	return;
+}
+
+{
+	my %skipinfo;
+	sub _can_skip_command {
+		my ($command, @packages) = @_;
+
+		return 0 if $dh{NO_ACT} and not $ENV{DH_INTERNAL_TEST_CAN_SKIP};
+
+		return 0 if $Debian::Debhelper::DH::SequenceState::unoptimizable_user_option ||
+			(exists $ENV{DH_OPTIONS} && length $ENV{DH_OPTIONS});
+
+		return 0 if exists($Debian::Debhelper::DH::SequenceState::command_opts{$command})
+			and @{$Debian::Debhelper::DH::SequenceState::command_opts{$command}};
+
+		if (! defined $skipinfo{$command}) {
+			$skipinfo{$command}=[extract_skipinfo($command)];
+		}
+		my @skipinfo=@{$skipinfo{$command}};
+		return 0 unless @skipinfo;
+		return 1 if scalar(@skipinfo) == 1 and $skipinfo[0] eq 'always-skip';
+		my ($all_pkgs, $had_cli_options);
+
+		foreach my $skipinfo (@skipinfo) {
+			my $type = 'pkgfile';
+			my $need = $skipinfo;
+			if ($skipinfo=~/^([a-zA-Z0-9-_]+)\((.*)\)$/) {
+				($type, $need) = ($1, $2);
+			}
+			if ($type eq 'tmp') {
+				foreach my $package (@packages) {
+					my $tmp = tmpdir($package);
+					return 0 if -e "$tmp/$need";
+				}
+			} elsif ($type eq 'pkgfile' or $type eq 'pkgfile-logged') {
+				my $pkgs;
+				if ($type eq 'pkgfile') {
+					$pkgs = \@packages;
+				} else {
+					$all_pkgs //= [ getpackages() ];
+					$pkgs = $all_pkgs;
+				}
+				# Use the secret bulk check call
+				return 0 if pkgfile($pkgs, $need) ne '';
+			} elsif ($type eq 'cli-options') {
+				$had_cli_options = 1;
+				# If cli-options is empty, we know the helper does not
+				# react to any thing and can always be skipped.
+				next if $need =~ m/^\s*$/;
+				# Long options are subject to abbreviations so it is
+				# very difficult to implement this optimization with
+				# long options.
+				return 0 if $Debian::Debhelper::DH::SequenceState::unoptimizable_option_bundle;
+				$need =~ s/(?:^|\s)BUILDSYSTEM(?:\s|$)/${\UNSKIPPABLE_CLI_OPTIONS_BUILD_SYSTEM}/;
+				my @behavior_options = split(qr/\Q|\E/, $need);
+				for my $opt (@behavior_options) {
+					return 0 if exists($Debian::Debhelper::DH::SequenceState::seen_options{$opt});
+				}
+			} elsif ($type eq 'buildsystem') {
+				require Debian::Debhelper::Dh_Buildsystems;
+				my $system = Debian::Debhelper::Dh_Buildsystems::load_buildsystem(undef, $need);
+				return 0 if defined($system);
+			} elsif ($type eq 'internal') {
+				if ($need eq 'bug#950723') {
+					$all_pkgs //= [ getpackages() ];
+					push(@{$all_pkgs}, map { "${_}@"} getpackages());
+					push(@packages, map { "${_}@"} @packages);
+				} elsif ($need eq 'rrr') {
+					my $req = Debian::Debhelper::Dh_Lib::root_requirements();
+					return 0 if $req ne 'none';
+				} else {
+					warning('Broken internal NOOP hint; should not happen unless someone is using implementation details');
+					error("Unknown internal NOOP type hint in ${command}: ${need}");
+				}
+			} else {
+				# Unknown hint - make no assumptions
+				return 0;
+			}
+		}
+		return 0 if not $had_cli_options and %Debian::Debhelper::DH::SequenceState::seen_options;
+		return 1;
+	}
+}
+
+sub _active_packages_for_command {
+	my ($command, $all_packages, $arch_packages, $indep_packages) = @_;
+	my $command_opts_ref = $Debian::Debhelper::DH::SequenceState::command_opts{$command};
+	my $selection = $all_packages;
+	if (grep { $_ eq '-i'} @{$command_opts_ref}) {
+		if (grep { $_ ne '-a'} @{$command_opts_ref}) {
+			$selection = $indep_packages;
+		}
+	} elsif (grep { $_ eq '-a'} @{$command_opts_ref}) {
+		$selection = $arch_packages;
+	}
+	return @{$selection};
+}
+
+1;