Adding upstream version 2.23.4+deb12u1.upstream/2.23.4+deb12u1upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 370 insertions, 0 deletions

diff --git a/scripts/cvs-debi.sh b/scripts/cvs-debi.sh
new file mode 100755
index 0000000..49b89d9
--- /dev/null
+++ b/scripts/cvs-debi.sh
@@ -0,0 +1,370 @@
+#!/bin/bash
+
+# cvs-debi:  Install current version of deb package
+# cvs-debc:  List contents of current version of deb package
+#
+# Based on debi/debc; see them for copyright information
+# Based on cvs-buildpackage, copyright 1997 Manoj Srivastava
+# (CVS Id: cvs-buildpackage,v 1.58 2003/08/22 17:24:29 srivasta Exp)
+# This code is copyright 2003, Julian Gilbey <jdg@debian.org>
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <https://www.gnu.org/licenses/>.
+
+set -e
+
+PROGNAME=${0##*/} PROGNAME="${PROGNAME%.sh}" # .sh for debugging purposes
+
+usage() {
+    if   [ "$PROGNAME" = cvs-debi ];  then usage_i
+    elif [ "$PROGNAME" = cvs-debc ];  then usage_c
+    else echo "Unrecognised invocation name: $PROGNAME" >&2; exit 1
+    fi;
+}
+
+usage_i() {
+    echo \
+"Usage: $PROGNAME [options] [package ...]
+  Install the .deb file(s) just created by cvs-buildpackage or cvs-debuild,
+  as listed in the .changes file generated on that run.  If packages are
+  listed, only install those specified binary packages from the .changes file.
+
+  Note that unlike cvs-buildpackage, the only way to specify the
+  source package name is with the -P option; you cannot simply have it
+  as the last parameter.
+
+  Also uses the cvs-buildpackage configuration files to determine the
+  location of the build tree, as described in the manpage.
+
+  Available options:
+    -M<module>        CVS module name
+    -P<package>       Package name
+    -V<version>       Package version
+    -T<tag>           CVS tag to use
+    -R<root dir>      Root directory
+    -W<work dir>      Working directory
+    -x<prefix>        CVS default module prefix
+    -a<arch>          Search for .changes file made for Debian build <arch>
+    -t<target>        Search for .changes file made for GNU <target> arch
+    --help            Show this message
+    --version         Show version and copyright information
+  Other cvs-buildpackage options will be silently ignored."
+}
+
+usage_c() {
+    echo \
+"Usage: $PROGNAME [options] [package ...]
+  Display the contents of the .deb file(s) just created by
+  cvs-buildpackage or cvs-debuild, as listed in the .changes file generated
+  on that run.  If packages are listed, only display those specified binary
+  packages from the .changes file.
+
+  Note that unlike cvs-buildpackage, the only way to specify the
+  source package name is with the -P option; you cannot simply have it
+  as the last parameter.
+
+  Also uses the cvs-buildpackage configuration files to determine the
+  location of the build tree, as described in its manpage.
+
+  Available options:
+    -M<module>        CVS module name
+    -P<package>       Package name
+    -V<version>       Package version
+    -T<tag>           CVS tag to use
+    -R<root dir>      Root directory
+    -W<work dir>      Working directory
+    -x<prefix>        CVS default module prefix
+    -a<arch>          Search for .changes file made for Debian build <arch>
+    -t<target>        Search for .changes file made for GNU <target> arch
+    --help            Show this message
+    --version         Show version and copyright information
+  Other cvs-buildpackage options will be silently ignored."
+}
+
+version() { echo \
+"This is $PROGNAME, from the Debian devscripts package, version ###VERSION###
+This code is copyright 2003, Julian Gilbey <jdg@debian.org>,
+all rights reserved.
+Based on original code by Christoph Lameter and Manoj Srivastava.
+This program comes with ABSOLUTELY NO WARRANTY.
+You are free to redistribute this code under the terms of
+the GNU General Public License, version 2 or later."
+}
+
+setq() {
+    # Variable Value Doc string
+    if [ "x$2" = "x" ]; then
+	echo >&2 "$PROGNAME: Unable to determine $3"
+	exit 1;
+    else
+	if [ ! "x$Verbose" = "x" ]; then
+	    echo "$PROGNAME: $3 is $2";
+	fi
+	eval "$1=\"\$2\"";
+    fi
+}
+
+# Is cvs-buildpackage installed?
+if ! command -v cvs-buildpackage > /dev/null; then
+    echo "$PROGNAME: need the cvs-buildpackage package installed to run this" >&2
+    exit 1
+fi
+
+# Long term variables, which may be set in the cvsdeb config file or the
+# environment:
+# rootdir workdir (if all original sources are kept in one dir)
+
+TEMPDIR=$(mktemp -dt cvs-debi.XXXXXXXX) || {
+    echo "$PROGNAME: unable to create temporary directory" >&2
+    echo "Aborting..." >&2
+    exit 1
+}
+TEMPFILE=$TEMPDIR/cl-tmp
+trap 'rm -f "$TEMPFILE"; rmdir "$TEMPDIR"' EXIT
+
+TAGOPT=
+
+# Command line; will bomb out if unrecognised options
+TEMP=$(getopt -a -s bash \
+       -o hC:EH:G:M:P:R:T:U:V:W:Ff:dcnr:x:Bp:Dk:a:Sv:m:e:i:I:t: \
+       --long help,version,ctp,tC,sgpg,spgp,us,uc,op \
+       --long si,sa,sd,ap,sp,su,sk,sr,sA,sP,sU,sK,sR,ss,sn \
+       -n "$PROGNAME" -- "$@")
+eval set -- $TEMP
+
+while true ; do
+    case "$1" in
+        -h|--help)   usage;   exit 0  ; shift   ;;
+        --version)   version; exit 0  ; shift   ;;
+	-M) opt_cvsmodule="$2"        ; shift 2 ;;
+	-P) opt_package="$2"          ; shift 2 ;;
+	-R) opt_rootdir="$2"          ; shift 2 ;;
+	-T) opt_tag="$2"              ; shift 2 ;;
+	-V) opt_version="$2"          ; shift 2 ;;
+	-W) opt_workdir="$2"          ; shift 2 ;;
+	-x) opt_prefix="$2"           ; shift 2 ;;
+        -a) targetarch="$2"           ; shift 2 ;;
+        -t) if [ "$2" != "C" ]; then targetgnusystem="$2"; fi
+	                              shift 2 ;;
+
+	# everything else is silently ignored
+	-[CHfGUr])                      shift 2 ;;
+	-[FnE])                         shift   ;;
+       --ctp|--op|--tC)                 shift   ;;
+	-[dDBbS])                       shift   ;;
+        -p)                             shift 2 ;;
+       --us|--uc|--sgpg|--spgp)         shift   ;;
+       --s[idapukrAPUKRns])             shift   ;;
+       --ap)                            shift   ;;
+        -[kvmeiI])                      shift 2 ;;
+
+        --) shift ; break ;;
+         *) echo >&2 "Internal error! ($1)"
+            usage; exit 1 ;;
+    esac
+done
+
+if [ "x$opt_cvsmodule" = "x" -a "x$opt_package" = "x" -a \
+      ! -e 'debian/changelog' ] ; then
+    echo >&2 "$PROGNAME should be run in the top working directory of"
+    echo >&2 "a Debian Package, or an explicit package (or CVS module) name"
+    echo >&2 "should be given."
+    exit 1
+fi
+
+if [ "x$opt_tag" != "x" ]; then
+    TAGOPT=-r$opt_tag
+fi
+
+# Command line, env variable, config file, or default
+# This anomalous position is in case we need to check out the changelog
+# below (anomalous since we have not loaded the config file yet)
+if [ ! "x$opt_prefix" = "x" ]; then
+    prefix="$opt_prefix"
+elif [ ! "x$CVSDEB_PREFIX" = "x" ]; then
+    prefix="$CVSDEB_PREFIX"
+elif [ ! "x$conf_prefix" = "x" ]; then
+    prefix="$conf_prefix"
+else
+    prefix=""
+fi
+
+# put a slash at the end of the prefix
+if [ "X$prefix" != "X" ]; then
+    prefix="$prefix/";
+    prefix=$(echo $prefix | sed 's://:/:g');
+fi
+
+if [ ! -f CVS/Root ]; then
+    if [ "X$CVSROOT" = "X" ]; then
+	echo "no CVS/Root file found, and CVSROOT var is empty" >&2
+	exit 1
+    fi
+else
+    CVSROOT=$(cat CVS/Root)
+    export CVSROOT
+fi
+
+if [ "x$opt_package" = "x" ]; then
+    # Get the official package name and version.
+    if [ -f debian/changelog ]; then
+	# Ok, changelog exists
+	 setq "package" \
+	    "`dpkg-parsechangelog -SSource`" \
+		"source package"
+	setq "version" \
+	    "`dpkg-parsechangelog -SVersion`" \
+		"source version"
+    elif [ "x$opt_cvsmodule" != "x" ]; then
+	# Hmm. Well, see if we can checkout the changelog file
+	rm -f $TEMPFILE
+	cvs -q co -p $TAGOPT $opt_cvsmodule/debian/changelog > $TEMPFILE
+        setq "package" \
+	    "`dpkg-parsechangelog -l$TEMPFILE -SSource`" \
+          "source package"
+        setq "version" \
+          "`dpkg-parsechangelog -l$TEMPFILE -SVersion`" \
+          "source version"
+        rm -f "$TEMPFILE"
+    else
+	# Well. We don't know what this package is.
+	echo >&2 " This does not appear be a Debian source tree, since"
+	echo >&2 " there is no debian/changelog, and there was no"
+	echo >&2 " package name or cvs module given on the command line"
+	echo >&2 " it is hard to figure out what the package name "
+	echo >&2 " should be. I give up."
+	exit 1
+    fi
+else
+    # The user knows best; package name is provided
+    setq "package" "$opt_package" "source package"
+
+    # Now, the version number
+    if [ "x$opt_version" != "x" ]; then
+	# All hail the user provided value
+	setq "version" "$opt_version" "source package"
+    elif [ -f debian/changelog ]; then
+	# Fine, see what the changelog says
+	setq "version" \
+	    "`dpkg-parsechangelog -SVersion`" \
+		"source version"
+    elif [ "x$opt_cvsmodule" != "x" ]; then
+	# Hmm. The CVS module name is known, so lets us try exporting changelog
+	rm -f $TEMPFILE
+	cvs -q co -p $TAGOPT $opt_cvsmodule/debian/changelog > $TEMPFILE
+        setq "version" \
+          "`dpkg-parsechangelog -l$TEMPFILE -SVersion`" \
+          "source version"
+        rm -f "$TEMPFILE"
+    else
+	# Ok, try exporting the package name
+	rm -f $TEMPFILE
+	cvsmodule="${prefix}$package"
+	cvs -q co -p $TAGOPT $cvsmodule/debian/changelog > $TEMPFILE
+        setq "version" \
+          "`dpkg-parsechangelog -l$TEMPFILE -SVersion`" \
+          "source version"
+        rm -f "$TEMPFILE"
+    fi
+fi
+
+rm -f $TEMPFILE
+rmdir $TEMPDIR
+trap "" 0 1 2 3 7 10 13 15
+
+
+non_epoch_version=$(echo -n "$version" | perl -pe 's/^\d+://')
+upstream_version=$(echo -n "$non_epoch_version" | sed  -e 's/-[^-]*$//')
+debian_version=$(echo -n $non_epoch_version |  perl -nle 'm/-([^-]*)$/ && print $1')
+
+# The default
+if [ "X$opt_rootdir" != "X" ]; then
+    rootdir="$opt_rootdir"
+else
+    rootdir='/usr/local/src/Packages'
+fi
+
+if [ "X$opt_workdir" != "X" ]; then
+    workdir="$opt_workdir"
+else
+    workdir="$rootdir/$package"
+fi
+
+# Load site defaults and over rides.
+if [ -f /etc/cvsdeb.conf ]; then
+    . /etc/cvsdeb.conf
+fi
+
+# Load user defaults and over rides.
+if [ -f ~/.cvsdeb.conf ]; then
+    . ~/.cvsdeb.conf
+fi
+
+# Command line, env variable, config file, or default
+if [ ! "x$opt_rootdir" = "x" ]; then
+    rootdir="$opt_rootdir"
+elif [ ! "x$CVSDEB_ROOTDIR" = "x" ]; then
+    rootdir="$CVSDEB_ROOTDIR"
+elif [ ! "x$conf_rootdir" = "x" ]; then
+    rootdir="$conf_rootdir"
+fi
+
+# Command line, env variable, config file, or default
+if [ ! "x$opt_workdir" = "x" ]; then
+    workdir="$opt_workdir"
+elif [ ! "x$CVSDEB_WORKDIR" = "x" ]; then
+    workdir="$CVSDEB_WORKDIR"
+elif [ ! "x$conf_workdir" = "x" ]; then
+    workdir="$conf_workdir"
+else
+    workdir="$rootdir/$package"
+fi
+
+if [ ! -d "$workdir" ]; then
+    echo >&2 "The working directory, $workdir, does not exist. Aborting."
+    if [ ! -d "$rootdir" ]; then
+	echo >&2 "The root directory, $rootdir, does not exist either."
+    fi
+    exit 1;
+fi
+
+# The next part is based on debi
+
+if [ -n "$targetarch" ] && [ -n "$targetgnusystem" ]; then
+    setq arch "$(dpkg-architecture "-a${targetarch}" "-t${targetgnusystem}" -qDEB_HOST_ARCH)" "build architecture"
+elif [ -n "$targetarch" ]; then
+    setq arch "$(dpkg-architecture "-a${targetarch}" -qDEB_HOST_ARCH)" "build architecture"
+elif [ -n "$targetgnusystem" ]; then
+    setq arch "$(dpkg-architecture "-t${targetgnusystem}" -qDEB_HOST_ARCH)" "build architecture"
+else
+    setq arch "$(dpkg-architecture -qDEB_HOST_ARCH)" "build architecture"
+fi
+
+pva="${package}_${non_epoch_version}_${arch}"
+changes="$pva.changes"
+
+cd $workdir || {
+    echo "Couldn't cd $workdir.  Aborting" >&2
+    exit 1
+}
+
+if [ ! -r "$changes" ]; then
+    echo "Can't read $workdir/$changes!  Have you built the package yet?" >&2
+    exit 1
+fi
+
+# Just call debc/debi respectively, now that we have a changes file
+
+SUBPROG="${PROGNAME#cvs-}"
+
+exec "$SUBPROG" --check-dirname-level 0 $changes "$@"