diff options
Diffstat (limited to '')
| -rwxr-xr-x | scripts/debrsign.sh | 273 |
1 files changed, 273 insertions, 0 deletions
diff --git a/scripts/debrsign.sh b/scripts/debrsign.sh new file mode 100755 index 0000000..128f88b --- /dev/null +++ b/scripts/debrsign.sh @@ -0,0 +1,273 @@ +#!/bin/bash + +# This program is used to REMOTELY sign a .dsc and .changes file +# pair in the form needed for a legal Debian upload. It is based on +# dpkg-buildpackage and debsign (which is also part of the devscripts +# package). +# +# In order for this program to work, debsign must be installed +# on the REMOTE machine which will be used to sign your package. +# You should run this program from within the package directory on +# the build machine. +# + +# Debian GNU/Linux debrsign. +# Copyright 1999 Mike Goldman, all rights reserved +# Modifications copyright 1999 Julian Gilbey <jdg@debian.org>, +# all rights reserved. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <https://www.gnu.org/licenses/>. + +# Abort if anything goes wrong +set -e + +PROGNAME=${0##*/} + +usage() { + echo \ +"Usage: debrsign [options] [username@]remotehost [changes or dsc] + Options: + -p<sign-command> The command to use for signing + -e<maintainer> Sign using key of <maintainer> (takes precedence over -m) + -m<maintainer> The same as -e + -k<keyid> The key to use for signing + -S Use changes file made for source-only upload + -a<arch> Use changes file made for Debian target architecture <arch> + -t<target> Use changes file made for GNU target architecture <target> + --multi Use most recent multiarch .changes file found + --path Specify directory GPG binary is located on remote host + --help Show this message + --version Show version and copyright information + If a changes or dscfile is specified, it is signed, otherwise + debian/changelog is parsed to find the changes file. The signing + is performed on remotehost using ssh and debsign." +} + +version() { + echo \ +"This is debrsign, from the Debian devscripts package, version ###VERSION### +This code is copyright 1999 by Mike Goldman and Julian Gilbey, +all rights reserved. This program comes with ABSOLUTELY NO WARRANTY. +You are free to redistribute this code under the terms of the +GNU General Public License, version 2 or later." +} + +mustsetvar() { + if [ "x$2" = x ] + then + echo >&2 "$PROGNAME: unable to determine $3" + exit 1 + else + # echo "$PROGNAME: $3 is $2" + eval "$1=\"\$2\"" + fi +} + +withecho() { + echo " $@" + "$@" +} + +# --- main script + +# For partial security, even though we know it doesn't work :( +# I guess maintainers will have to be careful, and there's no way around +# this in a shell script. +unset IFS +PATH=/usr/local/bin:/usr/bin:/bin +umask $(perl -e 'printf "%03o\n", umask | 022') + +eval $( + set +e + for var in $VARS; do + eval "$var=\$DEFAULT_$var" + done + for file in /etc/devscripts.conf ~/.devscripts; do + [ -r $file ] && . $file + done + + set | grep '^DEBRSIGN_') + +signargs= +while [ $# != 0 ] +do + value="$(echo x"$1" | sed -e 's/^x-.//')" + case "$1" in + -S) sourceonly="true" ;; + -a*) targetarch="$value" ;; + -t*) targetgnusystem="$value" ;; + --multi) multiarch="true" ;; + --help) usage; exit 0 ;; + --version) version; exit 0 ;; + --path) DEBRSIGN_PGP_PATH="$value" ;; + -*) signargs="$signargs '$1'" ;; + *) break ;; + esac + shift +done + +# Command line parameters are remote host (mandatory) and changes file +# name (optional). If there is no changes file name, we must be at the +# top level of a source tree and will figure out its name from +# debian/changelog +case $# in + 2) remotehost="$1" + case "$2" in + *.dsc) + changes= + dsc=$2 + ;; + *.changes) + changes=$2 + dsc=$(echo $changes | \ + perl -pe 's/\.changes$/.dsc/; s/(.*)_(.*)_(.*)\.dsc/\1_\2.dsc/') + buildinfo=$(echo $changes | \ + perl -pe 's/\.changes$/.buildinfo/; s/(.*)_(.*)_(.*)\.buildinfo/\1_\2_\3.buildinfo/') + ;; + *) + echo "$PROGNAME: Only a .changes or .dsc file is allowed as second argument!" >&2 + exit 1 + ;; + esac + ;; + + 1) remotehost="$1" + case "$1" in + *.changes) + echo "$PROGNAME: You must pass the address of the signing host as as the first argument" >&2 + exit 1 + ;; + *) + # We have to parse debian/changelog to find the current version + if [ ! -r debian/changelog ]; then + echo "$PROGNAME: Must be run from top of source dir or a .changes file given as arg" >&2 + exit 1 + fi + ;; + esac + + + mustsetvar package "`dpkg-parsechangelog -SSource`" "source package" + mustsetvar version "`dpkg-parsechangelog -SVersion`" "source version" + + if [ "x$sourceonly" = x ] + then + if [ -n "$targetarch" ] && [ -n "$targetgnusystem" ]; then + mustsetvar arch "$(dpkg-architecture "-a${targetarch}" "-t${targetgnusystem}" -qDEB_HOST_ARCH)" "build architecture" + elif [ -n "$targetarch" ]; then + mustsetvar arch "$(dpkg-architecture "-a${targetarch}" -qDEB_HOST_ARCH)" "build architecture" + elif [ -n "$targetgnusystem" ]; then + mustsetvar arch "$(dpkg-architecture "-t${targetgnusystem}" -qDEB_HOST_ARCH)" "build architecture" + else + mustsetvar arch "$(dpkg-architecture -qDEB_HOST_ARCH)" "build architecture" + fi + else + arch=source + fi + + sversion=$(echo "$version" | perl -pe 's/^\d+://') + pv="${package}_${sversion}" + pva="${package}_${sversion}${arch:+_${arch}}" + dsc="../$pv.dsc" + buildinfo="../$pva.buildinfo" + changes="../$pva.changes" + if [ -n "$multiarch" -o ! -r $changes ]; then + changes=$(ls "../${package}_${sversion}_*+*.changes" "../${package}_${sversion}_multi.changes" 2>/dev/null | head -1) + if [ -z "$multiarch" ]; then + if [ -n "$changes" ]; then + echo "$PROGNAME: could not find normal .changes file but found multiarch file:" >&2 + echo " $changes" >&2 + echo "Using this changes file instead." >&2 + else + echo "$PROGNAME: Can't find or can't read changes file $changes!" >&2 + exit 1 + fi + elif [ -n "$multiarch" -a -z "$changes" ]; then + echo "$PROGNAME: could not find any multiarch .changes file with name" >&2 + echo "../${package}_${sversion}_*.changes" >&2 + exit 1 + fi + fi + ;; + + *) echo "Usage: $PROGNAME [options] [user@]remotehost [.changes or .dsc file]" >&2 + exit 1 ;; +esac + +if [ "x$remotehost" == "x" ] +then + echo "No [user@]remotehost specified!" >&2 + exit 1 +fi + +declare -A base +base["$changes"]=$(basename "$changes") +base["$dsc"]=$(basename "$dsc") +base["$buildinfo"]=$(basename "$buildinfo") + +if [ -n "$changes" ] +then + if [ ! -f "$changes" -o ! -r "$changes" ] + then + echo "Can't find or can't read changes file $changes!" >&2 + exit 1 + fi + + # Is there a dsc file listed in the changes file? + if grep -q "${base[$dsc]}" "$changes" + then + if [ ! -f "$dsc" -o ! -r "$dsc" ] + then + echo "Can't find or can't read dsc file $dsc!" >&2 + exit 1 + fi + else + unset base["$dsc"] + fi + # Is there a buildinfo file listed in the changes file? + if grep -q "${base[$buildinfo]}" "$changes" + then + if [ ! -f "$buildinfo" -o ! -r "$buildinfo" ] + then + echo "Can't find or can't read buildinfo file $buildinfo!" >&2 + exit 1 + fi + else + unset base["$buildinfo"] + fi + # Now do the real work + withecho scp "${!base[@]}" "$remotehost:\$HOME" + withecho ssh -t "$remotehost" "debsign $signargs ${base[$changes]}" + for file in "${!base[@]}" + do + withecho scp "$remotehost:\$HOME/${base["$file"]}" "$file" + done + withecho ssh "$remotehost" "rm -f ${base[@]}" + + echo "Successfully signed changes file" +else + if [ ! -f "$dsc" -o ! -r "$dsc" ] + then + echo "Can't find or can't read dsc file $dsc!" >&2 + exit 1 + fi + + withecho scp "$dsc" "$remotehost:\$HOME" + withecho ssh -t "$remotehost" "${DEBRSIGN_PGP_PATH}debsign $signargs $dscbase" + withecho scp "$remotehost:\$HOME/$dscbase" "$dsc" + withecho ssh "$remotehost" "rm -f $dscbase" + + echo "Successfully signed dsc file" +fi +exit 0 |