Adding upstream version 1:6.1.upstream/1%6.1upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 281 insertions, 0 deletions

diff --git a/sfpdiag.c b/sfpdiag.c
new file mode 100644
index 0000000..1fa8b7b
--- /dev/null
+++ b/sfpdiag.c
@@ -0,0 +1,281 @@
+/*
+ * sfpdiag.c: Implements SFF-8472 optics diagnostics.
+ *
+ * Aurelien Guillaume <aurelien@iwi.me> (C) 2012
+ *   This implementation is loosely based on DOM patches
+ *   from Robert Olsson <robert@herjulf.se> (C) 2009
+ *   and SFF-8472 specs (ftp://ftp.seagate.com/pub/sff/SFF-8472.PDF)
+ *   by SFF Committee.
+ */
+
+#include <stdio.h>
+#include <math.h>
+#include <arpa/inet.h>
+#include "internal.h"
+#include "sff-common.h"
+
+/* Offsets in decimal, for direct comparison with the SFF specs */
+
+/* A0-based EEPROM offsets for DOM support checks */
+#define SFF_A0_DOM                        92
+#define SFF_A0_OPTIONS                    93
+#define SFF_A0_COMP                       94
+
+/* EEPROM bit values for various registers */
+#define SFF_A0_DOM_EXTCAL                 (1 << 4)
+#define SFF_A0_DOM_INTCAL                 (1 << 5)
+#define SFF_A0_DOM_IMPL                   (1 << 6)
+#define SFF_A0_DOM_PWRT                   (1 << 3)
+
+#define SFF_A0_OPTIONS_AW                 (1 << 7)
+
+/*
+ * See ethtool.c comments about SFF-8472, this is the offset
+ * at which the A2 page is in the EEPROM blob returned by the
+ * kernel.
+ */
+#define SFF_A2_BASE                       0x100
+
+/* A2-based offsets for DOM */
+#define SFF_A2_TEMP                       96
+#define SFF_A2_TEMP_HALRM                 0
+#define SFF_A2_TEMP_LALRM                 2
+#define SFF_A2_TEMP_HWARN                 4
+#define SFF_A2_TEMP_LWARN                 6
+
+#define SFF_A2_VCC                        98
+#define SFF_A2_VCC_HALRM                  8
+#define SFF_A2_VCC_LALRM                  10
+#define SFF_A2_VCC_HWARN                  12
+#define SFF_A2_VCC_LWARN                  14
+
+#define SFF_A2_BIAS                       100
+#define SFF_A2_BIAS_HALRM                 16
+#define SFF_A2_BIAS_LALRM                 18
+#define SFF_A2_BIAS_HWARN                 20
+#define SFF_A2_BIAS_LWARN                 22
+
+#define SFF_A2_TX_PWR                     102
+#define SFF_A2_TX_PWR_HALRM               24
+#define SFF_A2_TX_PWR_LALRM               26
+#define SFF_A2_TX_PWR_HWARN               28
+#define SFF_A2_TX_PWR_LWARN               30
+
+#define SFF_A2_RX_PWR                     104
+#define SFF_A2_RX_PWR_HALRM               32
+#define SFF_A2_RX_PWR_LALRM               34
+#define SFF_A2_RX_PWR_HWARN               36
+#define SFF_A2_RX_PWR_LWARN               38
+
+#define SFF_A2_ALRM_FLG                   112
+#define SFF_A2_WARN_FLG                   116
+
+/* 32-bit little-endian calibration constants */
+#define SFF_A2_CAL_RXPWR4                 56
+#define SFF_A2_CAL_RXPWR3                 60
+#define SFF_A2_CAL_RXPWR2                 64
+#define SFF_A2_CAL_RXPWR1                 68
+#define SFF_A2_CAL_RXPWR0                 72
+
+/* 16-bit little endian calibration constants */
+#define SFF_A2_CAL_TXI_SLP                76
+#define SFF_A2_CAL_TXI_OFF                78
+#define SFF_A2_CAL_TXPWR_SLP              80
+#define SFF_A2_CAL_TXPWR_OFF              82
+#define SFF_A2_CAL_T_SLP                  84
+#define SFF_A2_CAL_T_OFF                  86
+#define SFF_A2_CAL_V_SLP                  88
+#define SFF_A2_CAL_V_OFF                  90
+
+static struct sff8472_aw_flags {
+	const char *str;        /* Human-readable string, null at the end */
+	int offset;             /* A2-relative address offset */
+	__u8 value;             /* Alarm is on if (offset & value) != 0. */
+} sff8472_aw_flags[] = {
+	{ "Laser bias current high alarm",   SFF_A2_ALRM_FLG, (1 << 3) },
+	{ "Laser bias current low alarm",    SFF_A2_ALRM_FLG, (1 << 2) },
+	{ "Laser bias current high warning", SFF_A2_WARN_FLG, (1 << 3) },
+	{ "Laser bias current low warning",  SFF_A2_WARN_FLG, (1 << 2) },
+
+	{ "Laser output power high alarm",   SFF_A2_ALRM_FLG, (1 << 1) },
+	{ "Laser output power low alarm",    SFF_A2_ALRM_FLG, (1 << 0) },
+	{ "Laser output power high warning", SFF_A2_WARN_FLG, (1 << 1) },
+	{ "Laser output power low warning",  SFF_A2_WARN_FLG, (1 << 0) },
+
+	{ "Module temperature high alarm",   SFF_A2_ALRM_FLG, (1 << 7) },
+	{ "Module temperature low alarm",    SFF_A2_ALRM_FLG, (1 << 6) },
+	{ "Module temperature high warning", SFF_A2_WARN_FLG, (1 << 7) },
+	{ "Module temperature low warning",  SFF_A2_WARN_FLG, (1 << 6) },
+
+	{ "Module voltage high alarm",   SFF_A2_ALRM_FLG, (1 << 5) },
+	{ "Module voltage low alarm",    SFF_A2_ALRM_FLG, (1 << 4) },
+	{ "Module voltage high warning", SFF_A2_WARN_FLG, (1 << 5) },
+	{ "Module voltage low warning",  SFF_A2_WARN_FLG, (1 << 4) },
+
+	{ "Laser rx power high alarm",   SFF_A2_ALRM_FLG + 1, (1 << 7) },
+	{ "Laser rx power low alarm",    SFF_A2_ALRM_FLG + 1, (1 << 6) },
+	{ "Laser rx power high warning", SFF_A2_WARN_FLG + 1, (1 << 7) },
+	{ "Laser rx power low warning",  SFF_A2_WARN_FLG + 1, (1 << 6) },
+
+	{ NULL, 0, 0 },
+};
+
+/* Most common case: 16-bit unsigned integer in a certain unit */
+#define A2_OFFSET_TO_U16(offset) \
+	(id[SFF_A2_BASE + (offset)] << 8 | id[SFF_A2_BASE + (offset) + 1])
+
+/* Calibration slope is a number between 0.0 included and 256.0 excluded. */
+#define A2_OFFSET_TO_SLP(offset) \
+	(id[SFF_A2_BASE + (offset)] + id[SFF_A2_BASE + (offset) + 1] / 256.)
+
+/* Calibration offset is an integer from -32768 to 32767 */
+#define A2_OFFSET_TO_OFF(offset) \
+	((__s16)A2_OFFSET_TO_U16(offset))
+
+/* RXPWR(x) are IEEE-754 floating point numbers in big-endian format */
+#define A2_OFFSET_TO_RXPWRx(offset) \
+	(befloattoh((__u32 *)(id + SFF_A2_BASE + (offset))))
+
+/*
+ * 2-byte internal temperature conversions:
+ * First byte is a signed 8-bit integer, which is the temp decimal part
+ * Second byte are 1/256th of degree, which are added to the dec part.
+ */
+#define A2_OFFSET_TO_TEMP(offset) ((__s16)A2_OFFSET_TO_U16(offset))
+
+static void sff8472_dom_parse(const __u8 *id, struct sff_diags *sd)
+{
+	sd->bias_cur[MCURR] = A2_OFFSET_TO_U16(SFF_A2_BIAS);
+	sd->bias_cur[HALRM] = A2_OFFSET_TO_U16(SFF_A2_BIAS_HALRM);
+	sd->bias_cur[LALRM] = A2_OFFSET_TO_U16(SFF_A2_BIAS_LALRM);
+	sd->bias_cur[HWARN] = A2_OFFSET_TO_U16(SFF_A2_BIAS_HWARN);
+	sd->bias_cur[LWARN] = A2_OFFSET_TO_U16(SFF_A2_BIAS_LWARN);
+
+	sd->sfp_voltage[MCURR] = A2_OFFSET_TO_U16(SFF_A2_VCC);
+	sd->sfp_voltage[HALRM] = A2_OFFSET_TO_U16(SFF_A2_VCC_HALRM);
+	sd->sfp_voltage[LALRM] = A2_OFFSET_TO_U16(SFF_A2_VCC_LALRM);
+	sd->sfp_voltage[HWARN] = A2_OFFSET_TO_U16(SFF_A2_VCC_HWARN);
+	sd->sfp_voltage[LWARN] = A2_OFFSET_TO_U16(SFF_A2_VCC_LWARN);
+
+	sd->tx_power[MCURR] = A2_OFFSET_TO_U16(SFF_A2_TX_PWR);
+	sd->tx_power[HALRM] = A2_OFFSET_TO_U16(SFF_A2_TX_PWR_HALRM);
+	sd->tx_power[LALRM] = A2_OFFSET_TO_U16(SFF_A2_TX_PWR_LALRM);
+	sd->tx_power[HWARN] = A2_OFFSET_TO_U16(SFF_A2_TX_PWR_HWARN);
+	sd->tx_power[LWARN] = A2_OFFSET_TO_U16(SFF_A2_TX_PWR_LWARN);
+
+	sd->rx_power[MCURR] = A2_OFFSET_TO_U16(SFF_A2_RX_PWR);
+	sd->rx_power[HALRM] = A2_OFFSET_TO_U16(SFF_A2_RX_PWR_HALRM);
+	sd->rx_power[LALRM] = A2_OFFSET_TO_U16(SFF_A2_RX_PWR_LALRM);
+	sd->rx_power[HWARN] = A2_OFFSET_TO_U16(SFF_A2_RX_PWR_HWARN);
+	sd->rx_power[LWARN] = A2_OFFSET_TO_U16(SFF_A2_RX_PWR_LWARN);
+
+	sd->sfp_temp[MCURR] = A2_OFFSET_TO_TEMP(SFF_A2_TEMP);
+	sd->sfp_temp[HALRM] = A2_OFFSET_TO_TEMP(SFF_A2_TEMP_HALRM);
+	sd->sfp_temp[LALRM] = A2_OFFSET_TO_TEMP(SFF_A2_TEMP_LALRM);
+	sd->sfp_temp[HWARN] = A2_OFFSET_TO_TEMP(SFF_A2_TEMP_HWARN);
+	sd->sfp_temp[LWARN] = A2_OFFSET_TO_TEMP(SFF_A2_TEMP_LWARN);
+}
+
+/* Converts to a float from a big-endian 4-byte source buffer. */
+static float befloattoh(const __u32 *source)
+{
+	union {
+		__u32 src;
+		float dst;
+	} converter;
+
+	converter.src = ntohl(*source);
+	return converter.dst;
+}
+
+static void sff8472_calibration(const __u8 *id, struct sff_diags *sd)
+{
+	__u16 rx_reading;
+	unsigned int i;
+
+	/* Calibration should occur for all values (threshold and current) */
+	for (i = 0; i < ARRAY_SIZE(sd->bias_cur); ++i) {
+		/*
+		 * Apply calibration formula 1 (Temp., Voltage, Bias, Tx Power)
+		 */
+		sd->bias_cur[i]    *= A2_OFFSET_TO_SLP(SFF_A2_CAL_TXI_SLP);
+		sd->tx_power[i]    *= A2_OFFSET_TO_SLP(SFF_A2_CAL_TXPWR_SLP);
+		sd->sfp_voltage[i] *= A2_OFFSET_TO_SLP(SFF_A2_CAL_V_SLP);
+		sd->sfp_temp[i]    *= A2_OFFSET_TO_SLP(SFF_A2_CAL_T_SLP);
+
+		sd->bias_cur[i]    += A2_OFFSET_TO_OFF(SFF_A2_CAL_TXI_OFF);
+		sd->tx_power[i]    += A2_OFFSET_TO_OFF(SFF_A2_CAL_TXPWR_OFF);
+		sd->sfp_voltage[i] += A2_OFFSET_TO_OFF(SFF_A2_CAL_V_OFF);
+		sd->sfp_temp[i]    += A2_OFFSET_TO_OFF(SFF_A2_CAL_T_OFF);
+
+		/*
+		 * Apply calibration formula 2 (Rx Power only)
+		 */
+		rx_reading = sd->rx_power[i];
+		sd->rx_power[i]    = A2_OFFSET_TO_RXPWRx(SFF_A2_CAL_RXPWR0);
+		sd->rx_power[i]    += rx_reading *
+			A2_OFFSET_TO_RXPWRx(SFF_A2_CAL_RXPWR1);
+		sd->rx_power[i]    += rx_reading *
+			A2_OFFSET_TO_RXPWRx(SFF_A2_CAL_RXPWR2);
+		sd->rx_power[i]    += rx_reading *
+			A2_OFFSET_TO_RXPWRx(SFF_A2_CAL_RXPWR3);
+	}
+}
+
+static void sff8472_parse_eeprom(const __u8 *id, struct sff_diags *sd)
+{
+	sd->supports_dom = id[SFF_A0_DOM] & SFF_A0_DOM_IMPL;
+	sd->supports_alarms = id[SFF_A0_OPTIONS] & SFF_A0_OPTIONS_AW;
+	sd->calibrated_ext = id[SFF_A0_DOM] & SFF_A0_DOM_EXTCAL;
+	sd->rx_power_type = id[SFF_A0_DOM] & SFF_A0_DOM_PWRT;
+
+	sff8472_dom_parse(id, sd);
+
+	/*
+	 * If the SFP is externally calibrated, we need to read calibration data
+	 * and compensate the already stored readings.
+	 */
+	if (sd->calibrated_ext)
+		sff8472_calibration(id, sd);
+}
+
+void sff8472_show_all(const __u8 *id)
+{
+	struct sff_diags sd = {0};
+	char *rx_power_string = NULL;
+	int i;
+
+	sff8472_parse_eeprom(id, &sd);
+
+	if (!sd.supports_dom) {
+		printf("\t%-41s : No\n", "Optical diagnostics support");
+		return;
+	}
+	printf("\t%-41s : Yes\n", "Optical diagnostics support");
+
+	PRINT_BIAS("Laser bias current", sd.bias_cur[MCURR]);
+	PRINT_xX_PWR("Laser output power", sd.tx_power[MCURR]);
+
+	if (!sd.rx_power_type)
+		rx_power_string = "Receiver signal OMA";
+	else
+		rx_power_string = "Receiver signal average optical power";
+
+	PRINT_xX_PWR(rx_power_string, sd.rx_power[MCURR]);
+
+	PRINT_TEMP("Module temperature", sd.sfp_temp[MCURR]);
+	PRINT_VCC("Module voltage", sd.sfp_voltage[MCURR]);
+
+	printf("\t%-41s : %s\n", "Alarm/warning flags implemented",
+	       (sd.supports_alarms ? "Yes" : "No"));
+	if (sd.supports_alarms) {
+
+		for (i = 0; sff8472_aw_flags[i].str; ++i) {
+			printf("\t%-41s : %s\n", sff8472_aw_flags[i].str,
+			       id[SFF_A2_BASE + sff8472_aw_flags[i].offset]
+			       & sff8472_aw_flags[i].value ? "On" : "Off");
+		}
+		sff_show_thresholds(sd);
+	}
+}
+