summaryrefslogtreecommitdiffstats
path: root/usbdux
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-28 12:26:09 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-28 12:26:09 +0000
commit39a0d9019076a29a57a38a817b1830aef0708c11 (patch)
treed839d866a9986b99e90cd600f6874fae2f712be9 /usbdux
parentInitial commit. (diff)
downloadfirmware-nonfree-upstream.tar.xz
firmware-nonfree-upstream.zip
Adding upstream version 20230210.upstream/20230210upstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to '')
-rw-r--r--usbdux/Makefile_dux18
-rw-r--r--usbdux/fx2-include.asm164
-rw-r--r--usbdux/usbdux_firmware.asm1184
-rw-r--r--usbdux/usbduxfast_firmware.asm547
-rw-r--r--usbdux/usbduxsigma_firmware.asm1394
-rw-r--r--usbdux_firmware.binbin0 -> 1770 bytes
-rw-r--r--usbduxfast_firmware.binbin0 -> 999 bytes
-rw-r--r--usbduxsigma_firmware.binbin0 -> 8192 bytes
8 files changed, 3307 insertions, 0 deletions
diff --git a/usbdux/Makefile_dux b/usbdux/Makefile_dux
new file mode 100644
index 0000000..16c1c73
--- /dev/null
+++ b/usbdux/Makefile_dux
@@ -0,0 +1,18 @@
+# (c) Bernd Porr
+# GNU public license
+# no warranty
+#
+
+all: usbduxfast_firmware.bin usbdux_firmware.bin usbduxsigma_firmware.bin
+
+usbduxfast_firmware.bin: fx2-include.asm usbduxfast_firmware.asm
+ as31 -Fbin usbduxfast_firmware.asm
+
+usbdux_firmware.bin: fx2-include.asm usbdux_firmware.asm
+ as31 -Fbin usbdux_firmware.asm
+
+usbduxsigma_firmware.bin: fx2-include.asm usbduxsigma_firmware.asm
+ as31 -Fbin usbduxsigma_firmware.asm
+
+clean:
+ rm -f *.bin *~ *.lst *.bin
diff --git a/usbdux/fx2-include.asm b/usbdux/fx2-include.asm
new file mode 100644
index 0000000..9877996
--- /dev/null
+++ b/usbdux/fx2-include.asm
@@ -0,0 +1,164 @@
+; rev 0.91
+; (c) Bernd Porr, BerndPorr@f2s.com
+; GPL, GNU public license
+;
+; This program is free software; you can redistribute it and/or modify
+; it under the terms of the GNU General Public License as published by
+; the Free Software Foundation; either version 2 of the License, or
+; (at your option) any later version.
+;
+; This program is distributed in the hope that it will be useful,
+; but WITHOUT ANY WARRANTY; without even the implied warranty of
+; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+; GNU General Public License for more details.
+;
+; You should have received a copy of the GNU General Public License
+; along with this program; if not, write to the Free Software
+; Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+;
+; In conjunction with the as31.
+; Include-file for the FX2 by Cypress. The rest of the regs is defined
+; by the as31 itself.
+;
+; from the TRM of the FX2:
+;
+ ;; CPU control
+ .equ CPUCS,0E600H
+ .equ REVCTL,0E60BH
+ ;; interface config
+ .equ IFCONFIG,0E601H
+ .equ FIFORESET,0E604H
+ ;; Endpoint configs
+ .equ EP1OUTCFG,0E610H
+ .equ EP1INCFG,0E611H
+ .equ EP2CFG,0E612H
+ .equ EP4CFG,0E613H
+ .equ EP6CFG,0E614H
+ .equ EP8CFG,0E615H
+ ;; packets per frame, always one for USB 1.1
+ .equ EP2ISOINPKTS,0E640H
+ .equ EP4ISOINPKTS,0E641H
+ .equ EP6ISOINPKTS,0E642H
+ .equ EP8ISOINPKTS,0E643H
+ ;; endpoint byte counts
+ .equ EP1OUTBC,0E68DH
+ .equ EP2BCH,0E690H
+ .equ EP2BCL,0E691H
+ .equ EP4BCH,0E694H
+ .equ EP4BCL,0E695H
+ .equ EP6BCH,0E698H
+ .equ EP6BCL,0E699H
+ .equ EP8BCH,0E69CH
+ .equ EP8BCL,0E69DH
+ ;;
+ .equ EP4AUTOINLENH,0E622H
+ .equ EP4AUTOINLENL,0E623H
+ .equ EP6AUTOINLENH,0E624H
+ .equ EP6AUTOINLENL,0E625H
+ .equ EP2FIFOCFG,0E618H
+ .equ EP4FIFOCFG,0E619H
+ .equ EP6FIFOCFG,0E61AH
+ .equ EP8FIFOCFG,0E61BH
+ ;;
+ .equ INPKTEND,0E648H
+ .equ OUTPKTEND,0E649H
+ .equ GPIFCTLCFG,0E6C3H
+ .equ GPIFABORT,0E6F5H
+ .equ GPIFIDLECTL,0E6C2H
+ .equ GPIFWFSELECT,0E6C0H
+ .equ GPIFREADYCFG,0E6F3H
+ .equ GPIFIDLECS,0E6C1H
+ .equ EP6GPIFFLGSEL,0E6E2H
+ .equ EP6GPIFPDFSTOP,0E6E3H
+ .equ EP6GPIFTRIG,0E6E4H
+ .equ GPIFTCB3,0E6CEH
+ .equ GPIFTCB2,0E6CFH
+ .equ GPIFTCB1,0E6D0H
+ .equ GPIFTCB0,0E6D1H
+ .equ EP4GPIFFLGSEL,0E6DAH
+ .equ EP4GPIFPFSTOP,0E6DBH
+ ;;
+ ;; endpoint control
+ .equ EP2CS,0E6A3H
+ .equ EP4CS,0E6A4H
+ .equ EP6CS,0E6A5H
+ .equ EP8CS,0E6A6H
+ ;; endpoint buffers
+ .equ EP2FIFOBUF,0F000H
+ .equ EP4FIFOBUF,0F400H
+ .equ EP6FIFOBUF,0F800H
+ .equ EP8FIFOBUF,0FC00H
+ ;; IRQ enable for bulk NAK
+ .equ IBNIE,0E658H
+ ;; interrupt requ for NAK
+ .equ IBNIRQ,0E659H
+ ;; USB INT enables
+ .equ USBIE,0E65CH
+ ;; USB interrupt request
+ .equ USBIRQ,0E65DH
+ ;; endpoint IRQ enable
+ .equ EPIE,0E65EH
+ ;; endpoint IRQ requests
+ .equ EPIRQ,0E65FH
+ ;; USB error IRQ requests
+ .equ USBERRIE,0E662H
+ ;; USB error IRQ request
+ .equ USBERRIRQ,0E663H
+ ;; USB interrupt 2 autovector
+ .equ INT2IVEC,0E666H
+ ;; autovector enable
+ .equ INTSETUP,0E668H
+ ;; port cfg
+ .equ PORTACFG,0E670H
+ .equ PORTCCFG,0E671H
+ .equ PORTECFG,0E672H
+ ;; I2C bus
+ .equ I2CS,0E678H
+ .equ I2DAT,0E679H
+ .equ I2CTL,0E67AH
+ ;; auto pointers, read/write is directed to the pointed address
+ .equ XAUTODAT1,0E67BH
+ .equ XAUTODAT2,0E67CH
+ ;; USB-control
+ .equ USBCS,0E680H
+
+ .equ IOA,80H
+ .equ DPL0,82H
+ .equ DPH0,83H
+ .equ DPL1,84H
+ .equ DPH1,85H
+ .equ DPS,86H
+ .equ CKCON,8Eh
+ .equ IOB,90H
+ .equ EXIF,91h
+ .equ MPAGE,92h
+ .equ AUTOPTRH1,9AH
+ .equ AUTOPTRL1,9BH
+ .equ AUTOPTRH2,9DH
+ .equ AUTOPTRL2,9EH
+ .equ IOC,0A0H
+ .equ INT2CLR,0A1H
+ .equ INT4CLR,0A2H
+ .equ EP2468STAT,0AAH
+ .equ EP24FIFOFLGS,0ABH
+ .equ EP68FIFOFLGS,0ACH
+ .equ AUTOPTRSETUP,0AFH
+ .equ IOD,0B0H
+ .equ IOE,0B1H
+ .equ OEA,0B2H
+ .equ OEB,0B3H
+ .equ OEC,0B4H
+ .equ OED,0B5H
+ .equ OEE,0B6H
+ .equ GPIFTRIG,0BBH
+ .equ EIE,0E8h
+ .equ EIP,0F8h
+ .equ GPIFIE,0E660H
+
+;;; serial control
+ .equ SCON0,098h
+ .equ SBUF0,099h
+
+ ;;; end of file
+
+
diff --git a/usbdux/usbdux_firmware.asm b/usbdux/usbdux_firmware.asm
new file mode 100644
index 0000000..b93a895
--- /dev/null
+++ b/usbdux/usbdux_firmware.asm
@@ -0,0 +1,1184 @@
+; usbdux_firmware.asm
+; Copyright (C) 2004,2009 Bernd Porr, Bernd.Porr@f2s.com
+; For usbdux.c
+;
+; This program is free software; you can redistribute it and/or modify
+; it under the terms of the GNU General Public License as published by
+; the Free Software Foundation; either version 2 of the License, or
+; (at your option) any later version.
+;
+; This program is distributed in the hope that it will be useful,
+; but WITHOUT ANY WARRANTY; without even the implied warranty of
+; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+; GNU General Public License for more details.
+;
+; You should have received a copy of the GNU General Public License
+; along with this program; if not, write to the Free Software
+; Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+;
+;
+; Firmware: usbdux_firmware.asm for usbdux.c
+; Description: University of Stirling USB DAQ & INCITE Technology Limited
+; Devices: [ITL] USB-DUX (usbdux.o)
+; Author: Bernd Porr <Bernd.Porr@f2s.com>
+; Updated: 17 Apr 2009
+; Status: stable
+;
+;;;
+;;;
+;;;
+
+ .inc fx2-include.asm
+
+ .equ CHANNELLIST,80h ; channellist in indirect memory
+
+ .equ CMD_FLAG,90h ; flag if next IN transf is DIO
+ .equ SGLCHANNEL,91h ; channel for INSN
+ .equ PWMFLAG,92h ; PWM
+
+ .equ DIOSTAT0,98h ; last status of the digital port
+ .equ DIOSTAT1,99h ; same for the second counter
+
+ .equ CTR0,0A0H ; counter 0
+ .equ CTR1,0A2H ; counter 1
+
+ .org 0000h ; after reset the processor starts here
+ ljmp main ; jump to the main loop
+
+ .org 000bh ; timer 0 irq
+ ljmp timer0_isr
+
+ .org 0043h ; the IRQ2-vector
+ ljmp jmptbl ; irq service-routine
+
+ .org 0100h ; start of the jump table
+
+jmptbl: ljmp sudav_isr
+ nop
+ ljmp sof_isr
+ nop
+ ljmp sutok_isr
+ nop
+ ljmp suspend_isr
+ nop
+ ljmp usbreset_isr
+ nop
+ ljmp hispeed_isr
+ nop
+ ljmp ep0ack_isr
+ nop
+ ljmp spare_isr
+ nop
+ ljmp ep0in_isr
+ nop
+ ljmp ep0out_isr
+ nop
+ ljmp ep1in_isr
+ nop
+ ljmp ep1out_isr
+ nop
+ ljmp ep2_isr
+ nop
+ ljmp ep4_isr
+ nop
+ ljmp ep6_isr
+ nop
+ ljmp ep8_isr
+ nop
+ ljmp ibn_isr
+ nop
+ ljmp spare_isr
+ nop
+ ljmp ep0ping_isr
+ nop
+ ljmp ep1ping_isr
+ nop
+ ljmp ep2ping_isr
+ nop
+ ljmp ep4ping_isr
+ nop
+ ljmp ep6ping_isr
+ nop
+ ljmp ep8ping_isr
+ nop
+ ljmp errlimit_isr
+ nop
+ ljmp spare_isr
+ nop
+ ljmp spare_isr
+ nop
+ ljmp spare_isr
+ nop
+ ljmp ep2isoerr_isr
+ nop
+ ljmp ep4isoerr_isr
+ nop
+ ljmp ep6isoerr_isr
+ nop
+ ljmp ep8isoerr_isr
+
+
+ ;; dummy isr
+sudav_isr:
+sutok_isr:
+suspend_isr:
+usbreset_isr:
+hispeed_isr:
+ep0ack_isr:
+spare_isr:
+ep0in_isr:
+ep0out_isr:
+ep1in_isr:
+ibn_isr:
+ep0ping_isr:
+ep1ping_isr:
+ep2ping_isr:
+ep4ping_isr:
+ep6ping_isr:
+ep8ping_isr:
+errlimit_isr:
+ep2isoerr_isr:
+ep4isoerr_isr:
+ep6isoerr_isr:
+ep8isoerr_isr:
+ep6_isr:
+ep2_isr:
+ep4_isr:
+
+ push dps
+ push dpl
+ push dph
+ push dpl1
+ push dph1
+ push acc
+ push psw
+
+ ;; clear the USB2 irq bit and return
+ mov a,EXIF
+ clr acc.4
+ mov EXIF,a
+
+ pop psw
+ pop acc
+ pop dph1
+ pop dpl1
+ pop dph
+ pop dpl
+ pop dps
+
+ reti
+
+
+;;; main program
+;;; basically only initialises the processor and
+;;; then engages in an endless loop
+main:
+ mov DPTR,#CPUCS ; CPU control register
+ mov a,#00010000b ; 48Mhz
+ lcall syncdelaywr
+
+ mov dptr,#REVCTL
+ mov a,#00000011b ; allows skip
+ lcall syncdelaywr
+
+ mov IP,#0 ; all std 8051 int have low priority
+ mov EIP,#0FFH ; all FX2 interrupts have high priority
+
+ mov dptr,#INTSETUP ; IRQ setup register
+ mov a,#08h ; enable autovector
+ lcall syncdelaywr
+
+ lcall initAD ; init the ports to the converters
+
+ lcall initeps ; init the isochronous data-transfer
+
+ lcall init_timer
+
+mloop2: nop
+
+;;; pwm
+ mov r0,#PWMFLAG ; pwm on?
+ mov a,@r0 ; get info
+ jz mloop2 ; it's off
+
+ mov a,GPIFTRIG ; GPIF status
+ anl a,#80h ; done bit
+ jz mloop2 ; GPIF still busy
+
+ mov a,#01h ; WR,EP4, 01 = EP4
+ mov GPIFTRIG,a ; restart it
+
+ sjmp mloop2 ; loop for ever
+
+
+;;; GPIF waveform for PWM
+waveform:
+ ;; 0 1 2 3 4 5 6 7(not used)
+ ;; len (gives 50.007Hz)
+ .db 195, 195, 195, 195, 195, 195, 1, 1
+
+ ;; opcode
+ .db 002H, 006H, 002H, 002H, 002H, 002H, 002H, 002H
+
+ ;; out
+ .db 0ffH, 0ffH, 0ffH, 0ffH, 0ffH, 0ffH, 0ffH, 0ffH
+
+ ;; log
+ .db 000H, 000H, 000H, 000H, 000H, 000H, 000H, 000H
+
+
+stopPWM:
+ mov r0,#PWMFLAG ; flag for PWM
+ mov a,#0 ; PWM (for the main loop)
+ mov @r0,a ; set it
+
+ mov dptr,#IFCONFIG ; switch off GPIF
+ mov a,#10000000b ; gpif, 30MHz, internal IFCLK
+ lcall syncdelaywr
+ ret
+
+
+;;; init PWM
+startPWM:
+ mov dptr,#IFCONFIG ; switch on IFCLK signal
+ mov a,#10000010b ; gpif, 30MHz, internal IFCLK
+ lcall syncdelaywr
+
+ mov OEB,0FFH ; output to port B
+
+ mov DPTR,#EP4CFG
+ mov a,#10100000b ; valid, out, bulk
+ movx @DPTR,a
+
+ ;; reset the endpoint
+ mov dptr,#FIFORESET
+ mov a,#80h ; NAK
+ lcall syncdelaywr
+ mov a,#84h ; reset EP4 + NAK
+ lcall syncdelaywr
+ mov a,#0 ; normal op
+ lcall syncdelaywr
+
+ mov dptr,#EP4BCL
+ mov a,#0H ; discard packets
+ lcall syncdelaywr ; empty FIFO buffer
+ lcall syncdelaywr ; empty FIFO buffer
+
+ ;; aborts all transfers by the GPIF
+ mov dptr,#GPIFABORT
+ mov a,#0ffh ; abort all transfers
+ lcall syncdelaywr
+
+ ;; wait for GPIF to finish
+wait_f_abort:
+ mov a,GPIFTRIG ; GPIF status
+ anl a,#80h ; done bit
+ jz wait_f_abort ; GPIF busy
+
+ mov dptr,#GPIFCTLCFG
+ mov a,#10000000b ; tri state for CTRL
+ lcall syncdelaywr
+
+ mov dptr,#GPIFIDLECTL
+ mov a,#11110000b ; all CTL outputs low
+ lcall syncdelaywr
+
+ ;; abort if FIFO is empty
+ mov a,#00000001b ; abort if empty
+ mov dptr,#EP4GPIFFLGSEL
+ lcall syncdelaywr
+
+ ;;
+ mov a,#00000001b ; stop if GPIF flg
+ mov dptr,#EP4GPIFPFSTOP
+ lcall syncdelaywr
+
+ ;; transaction counter
+ mov a,#0ffH
+ mov dptr,#GPIFTCB3
+ lcall syncdelaywr
+
+ ;; transaction counter
+ mov a,#0ffH
+ mov dptr,#GPIFTCB2
+ lcall syncdelaywr
+
+ ;; transaction counter
+ mov a,#0ffH ; 512 bytes
+ mov dptr,#GPIFTCB1
+ lcall syncdelaywr
+
+ ;; transaction counter
+ mov a,#0ffH
+ mov dptr,#GPIFTCB0
+ lcall syncdelaywr
+
+ ;; RDY pins. Not used here.
+ mov a,#0
+ mov dptr,#GPIFREADYCFG
+ lcall syncdelaywr
+
+ ;; drives the output in the IDLE state
+ mov a,#1
+ mov dptr,#GPIFIDLECS
+ lcall syncdelaywr
+
+ ;; direct data transfer from the EP to the GPIF
+ mov dptr,#EP4FIFOCFG
+ mov a,#00010000b ; autoout=1, byte-wide
+ lcall syncdelaywr
+
+ ;; waveform 0 is used for FIFO out
+ mov dptr,#GPIFWFSELECT
+ mov a,#00000000b
+ movx @dptr,a
+ lcall syncdelay
+
+ ;; transfer the delay byte from the EP to the waveform
+ mov dptr,#0e781h ; EP1 buffer
+ movx a,@dptr ; get the delay
+ mov dptr,#waveform ; points to the waveform
+ mov r2,#6 ; fill 6 bytes
+timloop:
+ movx @dptr,a ; save timing in a xxx
+ inc dptr
+ djnz r2,timloop ; fill the 6 delay bytes
+
+ ;; load waveform
+ mov AUTOPTRH2,#0E4H ; XDATA0H
+ lcall syncdelay
+ mov AUTOPTRL2,#00H ; XDATA0L
+ lcall syncdelay
+
+ mov dptr,#waveform ; points to the waveform
+
+ mov AUTOPTRSETUP,#7 ; autoinc and enable
+ lcall syncdelay
+
+ mov r2,#20H ; 32 bytes to transfer
+
+wavetr:
+ movx a,@dptr
+ inc dptr
+ push dpl
+ push dph
+ push dpl1
+ push dph1
+ mov dptr,#XAUTODAT2
+ movx @dptr,a
+ lcall syncdelay
+ pop dph1
+ pop dpl1
+ pop dph
+ pop dpl
+ djnz r2,wavetr
+
+ mov dptr,#OUTPKTEND
+ mov a,#084H
+ lcall syncdelaywr
+ lcall syncdelaywr
+
+ mov r0,#PWMFLAG ; flag for PWM
+ mov a,#1 ; PWM (for the main loop)
+ mov @r0,a ; set it
+
+ ret
+
+
+
+;;; initialise the ports for the AD-converter
+initAD:
+ mov OEA,#27H ;PortA0,A1,A2,A5 Outputs
+ mov IOA,#22H ;/CS = 1, disable transfers to the converters
+ ret
+
+
+;;; init the timer for the soft counters
+init_timer:
+ ;; init the timer for 2ms sampling rate
+ mov CKCON,#00000001b; CLKOUT/12 for timer
+ mov TL0,#010H ; 16
+ mov TH0,#0H ; 256
+ mov IE,#82H ; switch on timer interrupt (80H for all IRQs)
+ mov TMOD,#00000000b ; 13 bit counters
+ setb TCON.4 ; enable timer 0
+ ret
+
+
+;;; from here it's only IRQ handling...
+
+;;; A/D-conversion:
+;;; control-byte in a,
+;;; result in r3(low) and r4(high)
+;;; this routine is optimised for speed
+readAD: ; mask the control byte
+ anl a,#01111100b ; only the channel, gain+pol are left
+ orl a,#10000001b ; start bit, external clock
+ ;; set CS to low
+ clr IOA.1 ; set /CS to zero
+ ;; send the control byte to the AD-converter
+ mov R2,#8 ; bit-counter
+bitlp: jnb ACC.7,bitzero ; jump if Bit7 = 0?
+ setb IOA.2 ; set the DIN bit
+ sjmp clock ; continue with the clock
+bitzero:clr IOA.2 ; clear the DIN bit
+clock: setb IOA.0 ; SCLK = 1
+ clr IOA.0 ; SCLK = 0
+ rl a ; next Bit
+ djnz R2,bitlp
+
+ ;; continue the aquisition (already started)
+ clr IOA.2 ; clear the DIN bit
+ mov R2,#5 ; five steps for the aquision
+clockaq:setb IOA.0 ; SCLK = 1
+ clr IOA.0 ; SCLK = 0
+ djnz R2,clockaq ; loop
+
+ ;; read highbyte from the A/D-converter
+ ;; and do the conversion
+ mov r4,#0 ; Highbyte goes into R4
+ mov R2,#4 ; COUNTER 4 data bits in the MSB
+ mov r5,#08h ; create bit-mask
+gethi: ; loop get the 8 highest bits from MSB downw
+ setb IOA.0 ; SCLK = 1
+ clr IOA.0 ; SCLK = 0
+ mov a,IOA ; from port A
+ jnb ACC.4,zerob ; the in-bit is zero
+ mov a,r4 ; get the byte
+ orl a,r5 ; or the bit to the result
+ mov r4,a ; save it again in r4
+zerob: mov a,r5 ; get r5 in order to shift the mask
+ rr a ; rotate right
+ mov r5,a ; back to r5
+ djnz R2,gethi
+ ;; read the lowbyte from the A/D-converter
+ mov r3,#0 ; Lowbyte goes into R3
+ mov r2,#8 ; COUNTER 8 data-bits in the LSB
+ mov r5,#80h ; create bit-mask
+getlo: ; loop get the 8 highest bits from MSB downw
+ setb IOA.0 ; SCLK = 1
+ clr IOA.0 ; SCLK = 0
+ mov a,IOA ; from port A
+ jnb ACC.4,zerob2 ; the in-bit is zero
+ mov a,r3 ; get the result-byte
+ orl a,r5 ; or the bit to the result
+ mov r3,a ; save it again in r4
+zerob2: mov a,r5 ; get r5 in order to shift the mask
+ rr a ; rotate right
+ mov r5,a ; back to r5
+ djnz R2,getlo
+ setb IOA.1 ; set /CS to one
+ ;;
+ ret
+
+
+
+;;; aquires data from A/D channels and stores them in the EP6 buffer
+conv_ad:
+ mov AUTOPTRH1,#0F8H ; auto pointer on EP6
+ mov AUTOPTRL1,#00H
+ mov AUTOPTRSETUP,#7
+ mov r0,#CHANNELLIST ; points to the channellist
+
+ mov a,@r0 ; number of channels
+ mov r1,a ; counter
+
+ mov DPTR,#XAUTODAT1 ; auto pointer
+convloop:
+ inc r0
+ mov a,@r0 ; Channel
+ lcall readAD
+ mov a,R3 ;
+ movx @DPTR,A
+ mov a,R4 ;
+ movx @DPTR,A
+ djnz r1,convloop
+
+ ret
+
+
+
+
+;;; initilise the transfer
+;;; It is assumed that the USB interface is in alternate setting 3
+initeps:
+ mov dptr,#FIFORESET
+ mov a,#80H
+ movx @dptr,a ; reset all fifos
+ mov a,#2
+ movx @dptr,a ;
+ mov a,#4
+ movx @dptr,a ;
+ mov a,#6
+ movx @dptr,a ;
+ mov a,#8
+ movx @dptr,a ;
+ mov a,#0
+ movx @dptr,a ; normal operat
+
+ mov DPTR,#EP2CFG
+ mov a,#10010010b ; valid, out, double buff, iso
+ movx @DPTR,a
+
+ mov dptr,#EP2FIFOCFG
+ mov a,#00000000b ; manual
+ movx @dptr,a
+
+ mov dptr,#EP2BCL ; "arm" it
+ mov a,#00h
+ movx @DPTR,a ; can receive data
+ lcall syncdelay ; wait to sync
+ movx @DPTR,a ; can receive data
+ lcall syncdelay ; wait to sync
+ movx @DPTR,a ; can receive data
+ lcall syncdelay ; wait to sync
+
+ mov DPTR,#EP1OUTCFG
+ mov a,#10100000b ; valid
+ movx @dptr,a
+
+ mov dptr,#EP1OUTBC ; "arm" it
+ mov a,#00h
+ movx @DPTR,a ; can receive data
+ lcall syncdelay ; wait until we can write again
+ movx @dptr,a ; make shure its really empty
+ lcall syncdelay ; wait
+
+ mov DPTR,#EP6CFG ; ISO data from here to the host
+ mov a,#11010010b ; Valid
+ movx @DPTR,a ; ISO transfer, double buffering
+
+ mov DPTR,#EP8CFG ; EP8
+ mov a,#11100000b ; BULK data from here to the host
+ movx @DPTR,a ;
+
+ mov dptr,#EPIE ; interrupt enable
+ mov a,#10001000b ; enable irq for ep1out,8
+ movx @dptr,a ; do it
+
+ mov dptr,#EPIRQ ; clear IRQs
+ mov a,#10100000b
+ movx @dptr,a
+
+ ;; enable interrups
+ mov DPTR,#USBIE ; USB int enables register
+ mov a,#2 ; enables SOF (1ms/125us interrupt)
+ movx @DPTR,a ;
+
+ mov EIE,#00000001b ; enable INT2 in the 8051's SFR
+ mov IE,#80h ; IE, enable all interrupts
+
+ ret
+
+
+;;; counter
+;;; r0: DIOSTAT
+;;; r1: counter address
+;;; r2: up/down-mask
+;;; r3: reset-mask
+;;; r4: clock-mask
+counter:
+ mov a,IOB ; actual IOB input state
+ mov r5,a ; save in r5
+ anl a,r3 ; bit mask for reset
+ jz no_reset ; reset if one
+ clr a ; set counter to zero
+ mov @r1,a
+ inc r4
+ mov @r1,a
+ sjmp ctr_end
+no_reset:
+ mov a,@r0 ; get last state
+ xrl a,r5 ; has it changed?
+ anl a,r5 ; is it now on?
+ anl a,r4 ; mask out the port
+ jz ctr_end ; no rising edge
+ mov a,r5 ; get port B again
+ anl a,r2 ; test if up or down
+ jnz ctr_up ; count up
+ mov a,@r1
+ dec a
+ mov @r1,a
+ cjne a,#0ffh,ctr_end ; underflow?
+ inc r1 ; high byte
+ mov a,@r1
+ dec a
+ mov @r1,a
+ sjmp ctr_end
+ctr_up: ; count up
+ mov a,@r1
+ inc a
+ mov @r1,a
+ jnz ctr_end
+ inc r1 ; high byte
+ mov a,@r1
+ inc a
+ mov @r1,a
+ctr_end:
+ mov a,r5
+ mov @r0,a
+ ret
+
+;;; implements two soft counters with up/down and reset
+timer0_isr:
+ push dps
+ push acc
+ push psw
+ push 00h ; R0
+ push 01h ; R1
+ push 02h ; R2
+ push 03h ; R3
+ push 04h ; R4
+ push 05h ; R5
+
+ mov r0,#DIOSTAT0 ; status of port
+ mov r1,#CTR0 ; address of counter0
+ mov a,#00000001b ; bit 0
+ mov r4,a ; clock
+ rl a ; bit 1
+ mov r2,a ; up/down
+ rl a ; bit 2
+ mov r3,a ; reset mask
+ lcall counter
+ inc r0 ; to DISTAT1
+ inc r1 ; to CTR1
+ inc r1
+ mov a,r3
+ rl a ; bit 3
+ rl a ; bit 4
+ mov r4,a ; clock
+ rl a ; bit 5
+ mov r2,a ; up/down
+ rl a ; bit 6
+ mov r3,a ; reset
+ lcall counter
+
+ pop 05h ; R5
+ pop 04h ; R4
+ pop 03h ; R3
+ pop 02h ; R2
+ pop 01h ; R1
+ pop 00h ; R0
+ pop psw
+ pop acc
+ pop dps
+
+ reti
+
+;;; interrupt-routine for SOF
+;;; is for full speed
+sof_isr:
+ push dps
+ push dpl
+ push dph
+ push dpl1
+ push dph1
+ push acc
+ push psw
+ push 00h ; R0
+ push 01h ; R1
+ push 02h ; R2
+ push 03h ; R3
+ push 04h ; R4
+ push 05h ; R5
+ push 06h ; R6
+ push 07h ; R7
+
+ mov a,EP2468STAT
+ anl a,#20H ; full?
+ jnz epfull ; EP6-buffer is full
+
+ lcall conv_ad ; conversion
+
+ mov DPTR,#EP6BCH ; byte count H
+ mov a,#0 ; is zero
+ lcall syncdelaywr ; wait until we can write again
+
+ mov DPTR,#EP6BCL ; byte count L
+ mov a,#10H ; is 8x word = 16 bytes
+ lcall syncdelaywr ; wait until we can write again
+
+epfull:
+ ;; do the D/A conversion
+ mov a,EP2468STAT
+ anl a,#01H ; empty
+ jnz epempty ; nothing to get
+
+ mov dptr,#0F000H ; EP2 fifo buffer
+ lcall dalo ; conversion
+
+ mov dptr,#EP2BCL ; "arm" it
+ mov a,#00h
+ lcall syncdelaywr ; wait for the rec to sync
+ lcall syncdelaywr ; wait for the rec to sync
+
+epempty:
+ ;; clear INT2
+ mov a,EXIF ; FIRST clear the USB (INT2) interrupt request
+ clr acc.4
+ mov EXIF,a ; Note: EXIF reg is not 8051 bit-addressable
+
+ mov DPTR,#USBIRQ ; points to the SOF
+ mov a,#2 ; clear the SOF
+ movx @DPTR,a
+
+nosof:
+ pop 07h
+ pop 06h
+ pop 05h
+ pop 04h ; R4
+ pop 03h ; R3
+ pop 02h ; R2
+ pop 01h ; R1
+ pop 00h ; R0
+ pop psw
+ pop acc
+ pop dph1
+ pop dpl1
+ pop dph
+ pop dpl
+ pop dps
+ reti
+
+
+reset_ep8:
+ ;; erase all data in ep8
+ mov dptr,#FIFORESET
+ mov a,#80H ; NAK
+ lcall syncdelaywr
+ mov dptr,#FIFORESET
+ mov a,#8 ; reset EP8
+ lcall syncdelaywr
+ mov dptr,#FIFORESET
+ mov a,#0 ; normal operation
+ lcall syncdelaywr
+ ret
+
+
+reset_ep6:
+ ;; throw out old data
+ mov dptr,#FIFORESET
+ mov a,#80H ; NAK
+ lcall syncdelaywr
+ mov dptr,#FIFORESET
+ mov a,#6 ; reset EP6
+ lcall syncdelaywr
+ mov dptr,#FIFORESET
+ mov a,#0 ; normal operation
+ lcall syncdelaywr
+ ret
+
+;;; interrupt-routine for ep1out
+;;; receives the channel list and other commands
+ep1out_isr:
+ push dps
+ push dpl
+ push dph
+ push dpl1
+ push dph1
+ push acc
+ push psw
+ push 00h ; R0
+ push 01h ; R1
+ push 02h ; R2
+ push 03h ; R3
+ push 04h ; R4
+ push 05h ; R5
+ push 06h ; R6
+ push 07h ; R7
+
+ mov dptr,#0E780h ; FIFO buffer of EP1OUT
+ movx a,@dptr ; get the first byte
+ mov r0,#CMD_FLAG ; pointer to the command byte
+ mov @r0,a ; store the command byte for ep8
+
+ mov dptr,#ep1out_jmp; jump table for the different functions
+ rl a ; multiply by 2: sizeof sjmp
+ jmp @a+dptr ; jump to the jump table
+ ;; jump table, corresponds to the command bytes defined
+ ;; in usbdux.c
+ep1out_jmp:
+ sjmp storechannellist; a=0
+ sjmp single_da ; a=1
+ sjmp config_digital_b; a=2
+ sjmp write_digital_b ; a=3
+ sjmp storesglchannel ; a=4
+ sjmp readcounter ; a=5
+ sjmp writecounter ; a=6
+ sjmp pwm_on ; a=7
+ sjmp pwm_off ; a=8
+
+pwm_on:
+ lcall startPWM
+ sjmp over_da
+
+pwm_off:
+ lcall stopPWM
+ sjmp over_da
+
+ ;; read the counter
+readcounter:
+ lcall reset_ep8 ; reset ep8
+ lcall ep8_ops ; fill the counter data in there
+ sjmp over_da ; jump to the end
+
+ ;; write zeroes to the counters
+writecounter:
+ mov dptr,#0e781h ; buffer
+ mov r0,#CTR0 ; r0 points to counter 0
+ movx a,@dptr ; channel number
+ jz wrctr0 ; first channel
+ mov r1,a ; counter
+wrctrl:
+ inc r0 ; next counter
+ inc r0 ; next counter
+ djnz r1,wrctrl ; advance to the right counter
+wrctr0:
+ inc dptr ; get to the value
+ movx a,@dptr ; get value
+ mov @r0,a ; save in ctr
+ inc r0 ; next byte
+ inc dptr
+ movx a,@dptr ; get value
+ mov @r0,a ; save in ctr
+ sjmp over_da ; jump to the end
+
+storesglchannel:
+ mov r0,#SGLCHANNEL ; the conversion bytes are now stored in 80h
+ mov dptr,#0e781h ; FIFO buffer of EP1OUT
+ movx a,@dptr ;
+ mov @r0,a
+
+ lcall reset_ep8 ; reset FIFO
+ ;; Save new A/D data in EP8. This is the first byte
+ ;; the host will read during an INSN. If there are
+ ;; more to come they will be handled by the ISR of
+ ;; ep8.
+ lcall ep8_ops ; get A/D data
+
+ sjmp over_da
+
+
+;;; Channellist:
+;;; the first byte is zero:
+;;; we've just received the channel list
+;;; the channel list is stored in the addresses from CHANNELLIST which
+;;; are _only_ reachable by indirect addressing
+storechannellist:
+ mov r0,#CHANNELLIST ; the conversion bytes are now stored in 80h
+ mov r2,#9 ; counter
+ mov dptr,#0e781h ; FIFO buffer of EP1OUT
+chanlloop:
+ movx a,@dptr ;
+ mov @r0,a
+ inc dptr
+ inc r0
+ djnz r2,chanlloop
+
+ lcall reset_ep6 ; reset FIFO
+
+ ;; load new A/D data into EP6
+ ;; This must be done. Otherwise the ISR is never called.
+ ;; The ISR is only called when data has _left_ the
+ ;; ep buffer here it has to be refilled.
+ lcall ep6_arm ; fill with the first data byte
+
+ sjmp over_da
+
+;;; Single DA conversion. The 2 bytes are in the FIFO buffer
+single_da:
+ mov dptr,#0e781h ; FIFO buffer of EP1OUT
+ lcall dalo ; conversion
+ sjmp over_da
+
+;;; configure the port B as input or output (bitwise)
+config_digital_b:
+ mov dptr,#0e781h ; FIFO buffer of EP1OUT
+ movx a,@dptr ; get the second byte
+ mov OEB,a ; set the output enable bits
+ sjmp over_da
+
+;;; Write one byte to the external digital port B
+;;; and prepare for digital read
+write_digital_b:
+ mov dptr,#0e781h ; FIFO buffer of EP1OUT
+ movx a,@dptr ; get the second byte
+ mov OEB,a ; output enable
+ inc dptr ; next byte
+ movx a,@dptr ; bits
+ mov IOB,a ; send the byte to the I/O port
+
+ lcall reset_ep8 ; reset FIFO of ep 8
+
+ ;; fill ep8 with new data from port B
+ ;; When the host requests the data it's already there.
+ ;; This must be so. Otherwise the ISR is not called.
+ ;; The ISR is only called when a packet has been delivered
+ ;; to the host. Thus, we need a packet here in the
+ ;; first instance.
+ lcall ep8_ops ; get digital data
+
+ ;;
+ ;; for all commands the same
+over_da:
+ mov dptr,#EP1OUTBC
+ mov a,#00h
+ lcall syncdelaywr ; arm
+ lcall syncdelaywr ; arm
+ lcall syncdelaywr ; arm
+
+ ;; clear INT2
+ mov a,EXIF ; FIRST clear the USB (INT2) interrupt request
+ clr acc.4
+ mov EXIF,a ; Note: EXIF reg is not 8051 bit-addressable
+
+ mov DPTR,#EPIRQ ;
+ mov a,#00001000b ; clear the ep1outirq
+ movx @DPTR,a
+
+ pop 07h
+ pop 06h
+ pop 05h
+ pop 04h ; R4
+ pop 03h ; R3
+ pop 02h ; R2
+ pop 01h ; R1
+ pop 00h ; R0
+ pop psw
+ pop acc
+ pop dph1
+ pop dpl1
+ pop dph
+ pop dpl
+ pop dps
+ reti
+
+
+
+;;; all channels
+dalo:
+ movx a,@dptr ; number of channels
+ inc dptr ; pointer to the first channel
+ mov r0,a ; 4 channels
+nextDA:
+ movx a,@dptr ; get the first low byte
+ mov r3,a ; store in r3 (see below)
+ inc dptr ; point to the high byte
+ movx a,@dptr ; get the high byte
+ mov r4,a ; store in r4 (for writeDA)
+ inc dptr ; point to the channel number
+ movx a,@dptr ; get the channel number
+ inc dptr ; get ready for the next channel
+ lcall writeDA ; write value to the DAC
+ djnz r0,nextDA ; next channel
+ ret
+
+
+
+;;; D/A-conversion:
+;;; control-byte in a,
+;;; value in r3(low) and r4(high)
+writeDA: ; mask the control byte
+ anl a,#11000000b ; only the channel is left
+ orl a,#00110000b ; internal clock, bipolar mode, +/-5V
+ orl a,r4 ; or the value of R4 to it
+ ;; set CS to low
+ clr IOA.5 ; set /CS to zero
+ ;; send the first byte to the DA-converter
+ mov R2,#8 ; bit-counter
+DA1: jnb ACC.7,zeroda ; jump if Bit7 = 0?
+ setb IOA.2 ; set the DIN bit
+ sjmp clkda ; continue with the clock
+zeroda: clr IOA.2 ; clear the DIN bit
+clkda: setb IOA.0 ; SCLK = 1
+ clr IOA.0 ; SCLK = 0
+ rl a ; next Bit
+ djnz R2,DA1
+
+
+ ;; send the second byte to the DA-converter
+ mov a,r3 ; low byte
+ mov R2,#8 ; bit-counter
+DA2: jnb ACC.7,zeroda2 ; jump if Bit7 = 0?
+ setb IOA.2 ; set the DIN bit
+ sjmp clkda2 ; continue with the clock
+zeroda2:clr IOA.2 ; clear the DIN bit
+clkda2: setb IOA.0 ; SCLK = 1
+ clr IOA.0 ; SCLK = 0
+ rl a ; next Bit
+ djnz R2,DA2
+ ;;
+ setb IOA.5 ; set /CS to one
+ ;;
+noDA: ret
+
+
+
+;;; arm ep6
+ep6_arm:
+ lcall conv_ad
+
+ mov DPTR,#EP6BCH ; byte count H
+ mov a,#0 ; is zero
+ lcall syncdelaywr ; wait until the length has arrived
+
+ mov DPTR,#EP6BCL ; byte count L
+ mov a,#10H ; is one
+ lcall syncdelaywr ; wait until the length has been proc
+ ret
+
+
+
+;;; converts one analog/digital channel and stores it in EP8
+;;; also gets the content of the digital ports B and D depending on
+;;; the COMMAND flag
+ep8_ops:
+ mov dptr,#0fc01h ; ep8 fifo buffer
+ clr a ; high byte
+ movx @dptr,a ; set H=0
+ mov dptr,#0fc00h ; low byte
+ mov r0,#CMD_FLAG
+ mov a,@r0
+ movx @dptr,a ; save command byte
+
+ mov dptr,#ep8_jmp ; jump table for the different functions
+ rl a ; multiply by 2: sizeof sjmp
+ jmp @a+dptr ; jump to the jump table
+ ;; jump table, corresponds to the command bytes defined
+ ;; in usbdux.c
+ep8_jmp:
+ sjmp ep8_err ; a=0, err
+ sjmp ep8_err ; a=1, err
+ sjmp ep8_err ; a=2, err
+ sjmp ep8_dio ; a=3, digital read
+ sjmp ep8_sglchannel ; a=4, analog A/D
+ sjmp ep8_readctr ; a=5, read counter
+ sjmp ep8_err ; a=6, write counter
+
+ ;; reads all counters
+ep8_readctr:
+ mov r0,#CTR0 ; points to counter0
+ mov dptr,#0fc02h ; ep8 fifo buffer
+ mov r1,#8 ; transfer 4 16bit counters
+ep8_ctrlp:
+ mov a,@r0 ; get the counter
+ movx @dptr,a ; save in the fifo buffer
+ inc r0 ; inc pointer to the counters
+ inc dptr ; inc pointer to the fifo buffer
+ djnz r1,ep8_ctrlp ; loop until ready
+
+ sjmp ep8_send ; send the data
+
+ ;; read one A/D channel
+ep8_sglchannel:
+ mov r0,#SGLCHANNEL ; points to the channel
+ mov a,@r0 ; Ch0
+
+ lcall readAD ; start the conversion
+
+ mov DPTR,#0fc02h ; EP8 FIFO
+ mov a,R3 ; get low byte
+ movx @DPTR,A ; store in FIFO
+ inc dptr ; next fifo entry
+ mov a,R4 ; get high byte
+ movx @DPTR,A ; store in FIFO
+
+ sjmp ep8_send ; send the data
+
+ ;; read the digital lines
+ep8_dio:
+ mov DPTR,#0fc02h ; store the contents of port B
+ mov a,IOB ; in the next
+ movx @dptr,a ; entry of the buffer
+
+ inc dptr
+ clr a ; high byte is zero
+ movx @dptr,a ; next byte of the EP
+
+ep8_send:
+ mov DPTR,#EP8BCH ; byte count H
+ mov a,#0 ; is zero
+ lcall syncdelaywr
+
+ mov DPTR,#EP8BCL ; byte count L
+ mov a,#10H ; 16 bytes
+ lcall syncdelaywr ; send the data over to the host
+
+ep8_err:
+ ret
+
+
+
+;;; EP8 interrupt: gets one measurement from the AD converter and
+;;; sends it via EP8. The channel # is stored in address 80H.
+;;; It also gets the state of the digital registers B and D.
+ep8_isr:
+ push dps
+ push dpl
+ push dph
+ push dpl1
+ push dph1
+ push acc
+ push psw
+ push 00h ; R0
+ push 01h ; R1
+ push 02h ; R2
+ push 03h ; R3
+ push 04h ; R4
+ push 05h ; R5
+ push 06h ; R6
+ push 07h ; R7
+
+ lcall ep8_ops
+
+ ;; clear INT2
+ mov a,EXIF ; FIRST clear the USB (INT2) interrupt request
+ clr acc.4
+ mov EXIF,a ; Note: EXIF reg is not 8051 bit-addressable
+
+ mov DPTR,#EPIRQ ;
+ mov a,#10000000b ; clear the ep8irq
+ movx @DPTR,a
+
+ pop 07h
+ pop 06h
+ pop 05h
+ pop 04h ; R4
+ pop 03h ; R3
+ pop 02h ; R2
+ pop 01h ; R1
+ pop 00h ; R0
+ pop psw
+ pop acc
+ pop dph1
+ pop dpl1
+ pop dph
+ pop dpl
+ pop dps
+ reti
+
+
+;; need to delay every time the byte counters
+;; for the EPs have been changed.
+
+syncdelay:
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ ret
+
+syncdelaywr:
+ movx @dptr,a
+ lcall syncdelay
+ ret
+
+
+.End
+
+
diff --git a/usbdux/usbduxfast_firmware.asm b/usbdux/usbduxfast_firmware.asm
new file mode 100644
index 0000000..0d8e7f8
--- /dev/null
+++ b/usbdux/usbduxfast_firmware.asm
@@ -0,0 +1,547 @@
+; usbduxfast_firmware.asm
+; Copyright (C) 2004,2009 Bernd Porr, Bernd.Porr@f2s.com
+;
+; This program is free software; you can redistribute it and/or modify
+; it under the terms of the GNU General Public License as published by
+; the Free Software Foundation; either version 2 of the License, or
+; (at your option) any later version.
+;
+; This program is distributed in the hope that it will be useful,
+; but WITHOUT ANY WARRANTY; without even the implied warranty of
+; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+; GNU General Public License for more details.
+;
+; You should have received a copy of the GNU General Public License
+; along with this program; if not, write to the Free Software
+; Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+;
+;
+; Firmware: usbduxfast_firmware.asm for usbdux.c
+; Description: Firmware for usbduxfast
+; Devices: [ITL] USB-DUX (usbdux.o)
+; Author: Bernd Porr <Bernd.Porr@f2s.com>
+; Updated: 17 Apr 2009
+; Status: stable
+;
+;;;
+;;;
+;;;
+
+ .inc fx2-include.asm
+
+ .equ WFLOADED,70H ; waveform is loaded
+
+ .org 0000h ; after reset the processor starts here
+ ljmp main ; jump to the main loop
+
+ .org 0043h ; the IRQ2-vector
+ ljmp jmptbl ; irq service-routine
+
+ .org 0100h ; start of the jump table
+
+jmptbl: ljmp sudav_isr
+ nop
+ ljmp sof_isr
+ nop
+ ljmp sutok_isr
+ nop
+ ljmp suspend_isr
+ nop
+ ljmp usbreset_isr
+ nop
+ ljmp hispeed_isr
+ nop
+ ljmp ep0ack_isr
+ nop
+ ljmp spare_isr
+ nop
+ ljmp ep0in_isr
+ nop
+ ljmp ep0out_isr
+ nop
+ ljmp ep1in_isr
+ nop
+ ljmp ep1out_isr
+ nop
+ ljmp ep2_isr
+ nop
+ ljmp ep4_isr
+ nop
+ ljmp ep6_isr
+ nop
+ ljmp ep8_isr
+ nop
+ ljmp ibn_isr
+ nop
+ ljmp spare_isr
+ nop
+ ljmp ep0ping_isr
+ nop
+ ljmp ep1ping_isr
+ nop
+ ljmp ep2ping_isr
+ nop
+ ljmp ep4ping_isr
+ nop
+ ljmp ep6ping_isr
+ nop
+ ljmp ep8ping_isr
+ nop
+ ljmp errlimit_isr
+ nop
+ ljmp spare_isr
+ nop
+ ljmp spare_isr
+ nop
+ ljmp spare_isr
+ nop
+ ljmp ep2isoerr_isr
+ nop
+ ljmp ep4isoerr_isr
+ nop
+ ljmp ep6isoerr_isr
+ nop
+ ljmp ep8isoerr_isr
+
+
+ ;; dummy isr
+sof_isr:
+sudav_isr:
+sutok_isr:
+suspend_isr:
+usbreset_isr:
+hispeed_isr:
+ep0ack_isr:
+spare_isr:
+ep0in_isr:
+ep0out_isr:
+ep1out_isr:
+ep1in_isr:
+ibn_isr:
+ep0ping_isr:
+ep1ping_isr:
+ep2ping_isr:
+ep4ping_isr:
+ep6ping_isr:
+ep8ping_isr:
+errlimit_isr:
+ep2isoerr_isr:
+ep4isoerr_isr:
+ep6isoerr_isr:
+ep8isoerr_isr:
+ep6_isr:
+ep2_isr:
+ep8_isr:
+
+ push dps
+ push dpl
+ push dph
+ push dpl1
+ push dph1
+ push acc
+ push psw
+
+ ;; clear the USB2 irq bit and return
+ mov a,EXIF
+ clr acc.4
+ mov EXIF,a
+
+ pop psw
+ pop acc
+ pop dph1
+ pop dpl1
+ pop dph
+ pop dpl
+ pop dps
+
+ reti
+
+
+;;; main program
+;;; basically only initialises the processor and
+;;; then engages in an endless loop
+main:
+ mov dptr,#REVCTL
+ mov a,#00000011b ; allows skip
+ lcall syncdelaywr
+
+ mov DPTR,#CPUCS ; CPU control register
+ mov a,#00010000b ; 48Mhz
+ lcall syncdelaywr
+
+ mov dptr,#IFCONFIG ; switch on IFCLK signal
+ mov a,#10100010b ; gpif, 30MHz
+ lcall syncdelaywr
+
+ mov dptr,#FIFORESET
+ mov a,#80h
+ lcall syncdelaywr
+ mov a,#8
+ lcall syncdelaywr
+ mov a,#2
+ lcall syncdelaywr
+ mov a,#4
+ lcall syncdelaywr
+ mov a,#6
+ lcall syncdelaywr
+ mov a,#0
+ lcall syncdelaywr
+
+ mov dptr,#INTSETUP ; IRQ setup register
+ mov a,#08h ; enable autovector
+ lcall syncdelaywr
+
+ lcall initeps ; init the isochronous data-transfer
+
+ lcall initGPIF
+
+;;; main loop
+
+mloop2:
+ lcall gpif_run
+ sjmp mloop2 ; do nothing. The rest is done by the IRQs
+
+
+gpif_run:
+ mov a,WFLOADED
+ jz no_trig ; do not trigger
+ mov a,GPIFTRIG ; GPIF status
+ anl a,#80h ; done bit
+ jz no_trig ; GPIF busy
+
+;;; gpif has stopped
+ mov a,#06h ; RD,EP6
+ mov GPIFTRIG,a
+no_trig:
+ ret
+
+
+
+initGPIF:
+ mov DPTR,#EP6CFG ; BLK data from here to the host
+ mov a,#11100000b ; Valid, quad buffering
+ lcall syncdelaywr ; write
+
+ mov dptr,#EP6FIFOCFG
+ mov a,#00001001b ; autoin, wordwide
+ lcall syncdelaywr
+
+ mov dptr,#EP6AUTOINLENH
+ mov a,#00000010b ; 512 bytes
+ lcall syncdelaywr ; write
+
+ mov dptr,#EP6AUTOINLENL
+ mov a,#00000000b ; 0
+ lcall syncdelaywr ; write
+
+ mov dptr,#GPIFWFSELECT
+ mov a,#11111100b ; waveform 0 for FIFO RD
+ lcall syncdelaywr
+
+ mov dptr,#GPIFCTLCFG
+ mov a,#10000000b ; tri state for CTRL
+ lcall syncdelaywr
+
+ mov dptr,#GPIFIDLECTL
+ mov a,#11111111b ; all CTL outputs high
+ lcall syncdelaywr
+ mov a,#11111101b ; reset counter
+ lcall syncdelaywr
+ mov a,#11111111b ; reset to high again
+ lcall syncdelaywr
+
+ mov a,#00000010b ; abort when full
+ mov dptr,#EP6GPIFFLGSEL
+ lcall syncdelaywr
+
+ mov a,#00000001b ; stop when buffer overfl
+ mov dptr,#EP6GPIFPDFSTOP
+ lcall syncdelaywr
+
+ mov a,#0
+ mov dptr,#GPIFREADYCFG
+ lcall syncdelaywr
+
+ mov a,#0
+ mov dptr,#GPIFIDLECS
+ lcall syncdelaywr
+
+; waveform 1
+; this is a dummy waveform which is used
+; during the upload of another waveform into
+; wavefrom 0
+; it branches directly into the IDLE state
+ mov dptr,#0E420H
+ mov a,#00111111b ; branch to IDLE
+ lcall syncdelaywr
+
+ mov dptr,#0E428H ; opcode
+ mov a,#00000001b ; deceision point
+ lcall syncdelaywr
+
+ mov dptr,#0E430H
+ mov a,#0FFH ; output is high
+ lcall syncdelaywr
+
+ mov dptr,#0E438H
+ mov a,#0FFH ; logic function
+ lcall syncdelaywr
+
+; signals that no waveform 0 is loaded so far
+ mov WFLOADED,#0 ; waveform flag
+
+ ret
+
+
+
+;;; initilise the transfer
+;;; It is assumed that the USB interface is in alternate setting 1
+initeps:
+ mov DPTR,#EP4CFG
+ mov a,#10100000b ; valid, bulk, out
+ lcall syncdelaywr
+
+ mov dptr,#EP4BCL ; "arm" it
+ mov a,#00h
+ lcall syncdelaywr ; wait until we can write again
+ lcall syncdelaywr ; wait
+ lcall syncdelaywr ; wait
+
+ mov DPTR,#EP8CFG
+ mov a,#0 ; disable EP8, it overlaps with EP6!!
+ lcall syncdelaywr
+
+ mov dptr,#EPIE ; interrupt enable
+ mov a,#00100000b ; enable irq for ep4
+ lcall syncdelaywr ; do it
+
+ mov dptr,#EPIRQ ; clear IRQs
+ mov a,#00100100b
+ movx @dptr,a
+
+ mov DPTR,#USBIE ; USB int enable register
+ mov a,#0 ; SOF etc
+ movx @DPTR,a ;
+
+ mov DPTR,#GPIFIE ; GPIF int enable register
+ mov a,#0 ; done IRQ
+ movx @DPTR,a ;
+
+ mov EIE,#00000001b ; enable INT2 in the 8051's SFR
+ mov IE,#80h ; IE, enable all interrupts
+
+ ret
+
+
+;;; interrupt-routine for ep4
+;;; receives the channel list and other commands
+ep4_isr:
+ push dps
+ push dpl
+ push dph
+ push dpl1
+ push dph1
+ push acc
+ push psw
+ push 00h ; R0
+ push 01h ; R1
+ push 02h ; R2
+ push 03h ; R3
+ push 04h ; R4
+ push 05h ; R5
+ push 06h ; R6
+ push 07h ; R7
+
+ mov dptr,#0f400h ; FIFO buffer of EP4
+ movx a,@dptr ; get the first byte
+
+ mov dptr,#ep4_jmp ; jump table for the different functions
+ rl a ; multiply by 2: sizeof sjmp
+ jmp @a+dptr ; jump to the jump table
+
+ep4_jmp:
+ sjmp storewaveform ; a=0
+ sjmp init_ep6 ; a=1
+
+init_ep6:
+ ; stop ep6
+ ; just now do nothing
+
+ ljmp over_wf
+
+
+storewaveform:
+ mov WFLOADED,#0 ; waveform flag
+
+ mov dptr,#EP6FIFOCFG
+ mov a,#00000000b ;
+ lcall syncdelaywr
+
+ mov dptr,#GPIFABORT
+ mov a,#0ffh ; abort all transfers
+ lcall syncdelaywr
+
+wait_f_abort:
+ mov a,GPIFTRIG ; GPIF status
+ anl a,#80h ; done bit
+ jz wait_f_abort ; GPIF busy
+
+ mov dptr,#GPIFWFSELECT
+ mov a,#11111101b ; select dummy waveform
+ movx @dptr,a
+ lcall syncdelay
+
+ mov dptr,#FIFORESET
+ mov a,#80h ; NAK
+ lcall syncdelaywr
+ mov a,#6 ; reset EP6
+ lcall syncdelaywr
+ mov a,#0 ; normal op
+ lcall syncdelaywr
+
+; change to dummy waveform 1
+ mov a,#06h ; RD,EP6
+ mov GPIFTRIG,a
+
+; wait a bit
+ mov r2,255
+loopx:
+ djnz r2,loopx
+
+; abort waveform if not already so
+ mov dptr,#GPIFABORT
+ mov a,#0ffh ; abort all transfers
+ lcall syncdelaywr
+
+; wait again
+ mov r2,255
+loopx2:
+ djnz r2,loopx2
+
+; check for DONE
+wait_f_abort2:
+ mov a,GPIFTRIG ; GPIF status
+ anl a,#80h ; done bit
+ jz wait_f_abort2 ; GPIF busy
+
+; upload the new waveform into waveform 0
+ mov AUTOPTRH2,#0E4H ; XDATA0H
+ lcall syncdelay
+ mov AUTOPTRL2,#00H ; XDATA0L
+ lcall syncdelay
+
+ mov AUTOPTRH1,#0F4H ; EP4 high
+ lcall syncdelay
+ mov AUTOPTRL1,#01H ; EP4 low
+ lcall syncdelay
+
+ mov AUTOPTRSETUP,#7 ; autoinc and enable
+ lcall syncdelay
+
+ mov r2,#20H ; 32 bytes to transfer
+
+wavetr:
+ mov dptr,#XAUTODAT1
+ movx a,@dptr
+ lcall syncdelay
+ mov dptr,#XAUTODAT2
+ movx @dptr,a
+ lcall syncdelay
+ djnz r2,wavetr
+
+ mov dptr,#EP6FIFOCFG
+ mov a,#00001001b ; autoin, wordwide
+ lcall syncdelaywr
+
+ mov dptr,#GPIFWFSELECT
+ mov a,#11111100b
+ movx @dptr,a
+ lcall syncdelay
+
+ mov dptr,#FIFORESET
+ mov a,#80h ; NAK
+ lcall syncdelaywr
+ mov a,#6 ; reset EP6
+ lcall syncdelaywr
+ mov a,#0 ; normal op
+ lcall syncdelaywr
+
+ mov dptr,#0E400H+10H; waveform 0: first CTL byte
+ movx a,@dptr ; get it
+ orl a,#11111011b ; force all bits to one except the range bit
+ mov dptr,#GPIFIDLECTL
+ lcall syncdelaywr
+
+ mov WFLOADED,#1 ; waveform flag
+
+; do the common things here
+over_wf:
+ mov dptr,#EP4BCL
+ mov a,#00h
+ movx @DPTR,a ; arm it
+ lcall syncdelay ; wait
+ movx @DPTR,a ; arm it
+ lcall syncdelay ; wait
+
+ ;; clear INT2
+ mov a,EXIF ; FIRST clear the USB (INT2) interrupt request
+ clr acc.4
+ mov EXIF,a ; Note: EXIF reg is not 8051 bit-addressable
+
+ mov DPTR,#EPIRQ ;
+ mov a,#00100000b ; clear the ep4irq
+ movx @DPTR,a
+
+ pop 07h
+ pop 06h
+ pop 05h
+ pop 04h ; R4
+ pop 03h ; R3
+ pop 02h ; R2
+ pop 01h ; R1
+ pop 00h ; R0
+ pop psw
+ pop acc
+ pop dph1
+ pop dpl1
+ pop dph
+ pop dpl
+ pop dps
+ reti
+
+
+;; need to delay every time the byte counters
+;; for the EPs have been changed.
+
+syncdelay:
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ ret
+
+
+syncdelaywr:
+ lcall syncdelay
+ movx @dptr,a
+ ret
+
+
+.End
+
+
+
+
+
+
+
+
+
+
+
+
diff --git a/usbdux/usbduxsigma_firmware.asm b/usbdux/usbduxsigma_firmware.asm
new file mode 100644
index 0000000..38f5f0e
--- /dev/null
+++ b/usbdux/usbduxsigma_firmware.asm
@@ -0,0 +1,1394 @@
+; usbdux_firmware.asm
+; Copyright (C) 2010,2015 Bernd Porr, mail@berndporr.me.uk
+; For usbduxsigma.c 0.5+
+;
+; This program is free software; you can redistribute it and/or modify
+; it under the terms of the GNU General Public License as published by
+; the Free Software Foundation; either version 2 of the License, or
+; (at your option) any later version.
+;
+; This program is distributed in the hope that it will be useful,
+; but WITHOUT ANY WARRANTY; without even the implied warranty of
+; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+; GNU General Public License for more details.
+;
+; You should have received a copy of the GNU General Public License
+; along with this program; if not, write to the Free Software
+; Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+;
+;
+; Firmware: usbduxsigma_firmware.asm for usbduxsigma.c
+; Description: University of Stirling USB DAQ & INCITE Technology Limited
+; Devices: [ITL] USB-DUX-SIGMA (usbduxsigma.ko)
+; Author: Bernd Porr <mail@berndporr.me.uk>
+; Updated: 20 Jul 2015
+; Status: testing
+;
+;;;
+;;;
+;;;
+
+ .inc fx2-include.asm
+
+;;; a couple of flags in high memory
+ .equ CMD_FLAG,80h ; flag for the next in transfer
+ .equ PWMFLAG,81h ; PWM on or off?
+ .equ MAXSMPL,82H ; maximum number of samples, n channellist
+ .equ MUXSG0,83H ; content of the MUXSG0 register
+ .equ INTERVAL,88h ; uframe/frame interval
+ .equ INTCTR,89h ; interval counter
+ .equ DABUFFER,0F0h ; buffer with DA values
+
+;;; in precious low memory but accessible within one clock cycle
+ .equ DPTRL,70H
+ .equ DPTRH,71h
+ .equ ASYNC_ON,72h
+ .equ SMPLCTR,73h
+
+;;; actual code
+ .org 0000h ; after reset the processor starts here
+ ljmp main ; jump to the main loop
+
+ .org 0003h
+ ljmp isr0 ; external interrupt 0: /DRY
+
+ .org 0043h ; the IRQ2-vector
+ ljmp jmptbl ; irq service-routine
+
+ .org 0100h ; start of the jump table
+
+jmptbl: ljmp sudav_isr
+ nop
+ ljmp sof_isr
+ nop
+ ljmp sutok_isr
+ nop
+ ljmp suspend_isr
+ nop
+ ljmp usbreset_isr
+ nop
+ ljmp hispeed_isr
+ nop
+ ljmp ep0ack_isr
+ nop
+ ljmp spare_isr
+ nop
+ ljmp ep0in_isr
+ nop
+ ljmp ep0out_isr
+ nop
+ ljmp ep1in_isr
+ nop
+ ljmp ep1out_isr
+ nop
+ ljmp ep2_isr
+ nop
+ ljmp ep4_isr
+ nop
+ ljmp ep6_isr
+ nop
+ ljmp ep8_isr
+ nop
+ ljmp ibn_isr
+ nop
+ ljmp spare_isr
+ nop
+ ljmp ep0ping_isr
+ nop
+ ljmp ep1ping_isr
+ nop
+ ljmp ep2ping_isr
+ nop
+ ljmp ep4ping_isr
+ nop
+ ljmp ep6ping_isr
+ nop
+ ljmp ep8ping_isr
+ nop
+ ljmp errlimit_isr
+ nop
+ ljmp spare_isr
+ nop
+ ljmp spare_isr
+ nop
+ ljmp spare_isr
+ nop
+ ljmp ep2isoerr_isr
+ nop
+ ljmp ep4isoerr_isr
+ nop
+ ljmp ep6isoerr_isr
+ nop
+ ljmp ep8isoerr_isr
+
+
+ ;; dummy isr
+sudav_isr:
+sutok_isr:
+suspend_isr:
+usbreset_isr:
+hispeed_isr:
+ep0ack_isr:
+spare_isr:
+ep0in_isr:
+ep0out_isr:
+ibn_isr:
+ep0ping_isr:
+ep1ping_isr:
+ep2ping_isr:
+ep4ping_isr:
+ep6ping_isr:
+ep8ping_isr:
+errlimit_isr:
+ep2isoerr_isr:
+ep4isoerr_isr:
+ep6isoerr_isr:
+ep8isoerr_isr:
+ep6_isr:
+ep2_isr:
+ep4_isr:
+
+ push dps
+ push dpl
+ push dph
+ push dpl1
+ push dph1
+ push acc
+ push psw
+
+ ;; clear the USB2 irq bit and return
+ mov a,EXIF
+ clr acc.4
+ mov EXIF,a
+
+ pop psw
+ pop acc
+ pop dph1
+ pop dpl1
+ pop dph
+ pop dpl
+ pop dps
+
+ reti
+
+
+ep1in_isr:
+ push dps
+ push dpl
+ push dph
+ push dpl1
+ push dph1
+ push acc
+ push psw
+
+ mov dptr,#0E7C0h ; EP1in
+ mov a,IOB ; get DIO D
+ movx @dptr,a ; store it
+ inc dptr ; next byte
+ mov a,IOC ; get DIO C
+ movx @dptr,a ; store it
+ inc dptr ; next byte
+ mov a,IOD ; get DIO B
+ movx @dptr,a ; store it
+ inc dptr ; next byte
+ mov a,#0 ; just zero
+ movx @dptr,a ; pad it up
+
+ ;; clear INT2
+ mov a,EXIF ; FIRST clear the USB (INT2) interrupt request
+ clr acc.4
+ mov EXIF,a ; Note: EXIF reg is not 8051 bit-addressable
+
+ mov DPTR,#EPIRQ ;
+ mov a,#00000100b ; clear the ep1in
+ movx @DPTR,a
+
+ pop psw
+ pop acc
+ pop dph1
+ pop dpl1
+ pop dph
+ pop dpl
+ pop dps
+ reti
+
+
+
+;;; this is triggered when DRY goes low
+isr0:
+ push dps
+ push dpl
+ push dph
+ push dpl1
+ push dph1
+ push acc
+ push psw
+ push 00h ; R0
+ push 01h ; R1
+ push 02h ; R2
+ push 03h ; R3
+ push 04h ; R4
+ push 05h ; R5
+ push 06h ; R6
+ push 07h ; R7
+
+ mov a,ASYNC_ON
+ jz noepsubmit
+
+ mov DPS,#0
+ mov dpl,DPTRL
+ mov dph,DPTRH
+
+ lcall readADCch ; read one channel
+
+ mov DPTRL,dpl
+ mov DPTRH,dph
+
+ mov a,SMPLCTR
+ dec a
+ mov SMPLCTR,a
+ jnz noepsubmit
+
+ mov ASYNC_ON,#0
+
+ clr IOA.7 ; START = 0
+
+ ;; arm the endpoint and send off the data
+ mov DPTR,#EP6BCH ; byte count H
+ mov a,#0 ; is zero
+ lcall syncdelaywr ; wait until we can write again
+
+ mov r0,#MAXSMPL ; number of samples to transmit
+ mov a,@r0 ; get them
+ rl a ; a=a*2
+ rl a ; a=a*2
+ add a,#4 ; four bytes for DIO
+ mov DPTR,#EP6BCL ; byte count L
+ lcall syncdelaywr ; wait until we can write again
+
+noepsubmit:
+ pop 07h
+ pop 06h
+ pop 05h
+ pop 04h ; R4
+ pop 03h ; R3
+ pop 02h ; R2
+ pop 01h ; R1
+ pop 00h ; R0
+ pop psw
+ pop acc
+ pop dph1
+ pop dpl1
+ pop dph
+ pop dpl
+ pop dps
+
+ reti
+
+
+
+;;; main program
+;;; basically only initialises the processor and
+;;; then engages in an endless loop
+main:
+ mov DPTR,#CPUCS ; CPU control register
+ mov a,#00010000b ; 48Mhz
+ lcall syncdelaywr
+
+ mov dptr,#REVCTL
+ mov a,#00000011b ; allows skip
+ lcall syncdelaywr
+
+ mov dptr,#INTSETUP ; IRQ setup register
+ mov a,#08h ; enable autovector
+ lcall syncdelaywr
+
+ mov dptr,#PORTCCFG
+ mov a,#0
+ lcall syncdelaywr
+
+ mov IP,#01H ; int0 has highest interrupt priority
+ mov EIP,#0 ; all USB interrupts have low priority
+
+ lcall initAD ; init the ports to the converters
+
+ lcall initeps ; init the isochronous data-transfer
+
+;;; main loop, rest is done as interrupts
+mloop2: nop
+
+;;; pwm
+ mov r0,#PWMFLAG ; pwm on?
+ mov a,@r0 ; get info
+ jz mloop2 ; it's off
+
+ mov a,GPIFTRIG ; GPIF status
+ anl a,#80h ; done bit
+ jz mloop2 ; GPIF still busy
+
+ mov a,#01h ; WR,EP4, 01 = EP4
+ mov GPIFTRIG,a ; restart it
+
+ sjmp mloop2 ; loop for ever
+
+
+;;; initialise the ports for the AD-converter
+initAD:
+ mov r0,#MAXSMPL ; length of channellist
+ mov @r0,#0 ; we don't want to accumlate samples
+
+ mov ASYNC_ON,#0 ; async enable
+
+ mov r0,#DABUFFER
+ mov @r0,#0
+
+ mov OEA,#11100000b ; PortA7,A6,A5 Outputs
+ mov IOA,#01100000b ; /CS = 1 and START = 0
+ mov dptr,#IFCONFIG ; switch on clock on IFCLK pin
+ mov a,#10100000b ; gpif, 30MHz, internal IFCLK -> 15MHz for AD
+ lcall syncdelaywr
+
+ mov SCON0,#013H ; ser rec en, TX/RX: stop, 48/12MHz=4MHz clock
+
+ mov dptr,#PORTECFG
+ mov a,#00001000b ; special function for port E: RXD0OUT
+ lcall syncdelaywr
+
+ ret
+
+
+;;; send a byte via SPI
+;;; content in a, dptr1 is changed
+;;; the lookup is done in dptr1 so that the normal dptr is not affected
+;;; important: /cs needs to be reset to 1 by the caller: IOA.5
+sendSPI:
+ inc DPS
+
+ ;; bit reverse
+ mov dptr,#swap_lut ; lookup table
+ movc a,@a+dptr ; reverse bits
+
+ ;; clear interrupt flag, is used to detect
+ ;; successful transmission
+ clr SCON0.1 ; clear interrupt flag
+
+ ;; start transmission by writing the byte
+ ;; in the transmit buffer
+ mov SBUF0,a ; start transmission
+
+ ;; wait for the end of the transmission
+sendSPIwait:
+ mov a,SCON0 ; get transmission status
+ jnb ACC.1,sendSPIwait ; loop until transmitted
+
+ inc DPS
+
+ ret
+
+
+
+
+;;; receive a byte via SPI
+;;; content in a, dptr is changed
+;;; the lookup is done in dptr1 so that the normal dptr is not affected
+;;; important: the /CS needs to be set to 1 by the caller via "setb IOA.5"
+recSPI:
+ inc DPS
+
+ clr IOA.5 ; /cs to 0
+
+ ;; clearning the RI bit starts reception of data
+ clr SCON0.0
+
+recSPIwait:
+ ;; RI goes back to 1 after the reception of the 8 bits
+ mov a,SCON0 ; get receive status
+ jnb ACC.0,recSPIwait; loop until all bits received
+
+ ;; read the byte from the buffer
+ mov a,SBUF0 ; get byte
+
+ ;; lookup: reverse the bits
+ mov dptr,#swap_lut ; lookup table
+ movc a,@a+dptr ; reverse the bits
+
+ inc DPS
+
+ ret
+
+
+
+
+;;; reads a register
+;;; register address in a
+;;; returns value in a
+registerRead:
+ anl a,#00001111b ; mask out the index to the register
+ orl a,#01000000b ; 010xxxxx indicates register read
+ clr IOA.5 ; ADC /cs to 0
+ lcall sendSPI ; send the command over
+ lcall recSPI ; read the contents back
+ setb IOA.5 ; ADC /cs to 1
+ ret
+
+
+
+;;; writes to a register
+;;; register address in a
+;;; value in r0
+registerWrite:
+ push acc
+ anl a,#00001111b ; mask out the index to the register
+ orl a,#01100000b ; 011xxxxx indicates register write
+
+ clr IOA.5 ; ADC /cs to 0
+
+ lcall sendSPI ;
+ mov a,r0
+ lcall sendSPI
+
+ setb IOA.5 ; ADC /cs to 1
+ pop acc
+
+ lcall registerRead ; check if the data has arrived in the ADC
+ mov 0f0h,r0 ; register B
+ cjne a,0f0h,registerWrite ; something went wrong, try again
+
+ ret
+
+
+
+;;; initilise the endpoints
+initeps:
+ mov dptr,#FIFORESET
+ mov a,#80H
+ movx @dptr,a ; reset all fifos
+ mov a,#2
+ movx @dptr,a ;
+ mov a,#4
+ movx @dptr,a ;
+ mov a,#6
+ movx @dptr,a ;
+ mov a,#8
+ movx @dptr,a ;
+ mov a,#0
+ movx @dptr,a ; normal operat
+
+ mov DPTR,#EP2CFG
+ mov a,#10010010b ; valid, out, double buff, iso
+ movx @DPTR,a
+
+ mov dptr,#EP2FIFOCFG
+ mov a,#00000000b ; manual
+ movx @dptr,a
+
+ mov dptr,#EP2BCL ; "arm" it
+ mov a,#00h
+ movx @DPTR,a ; can receive data
+ lcall syncdelay ; wait to sync
+ movx @DPTR,a ; can receive data
+ lcall syncdelay ; wait to sync
+ movx @DPTR,a ; can receive data
+ lcall syncdelay ; wait to sync
+
+ mov DPTR,#EP1OUTCFG
+ mov a,#10100000b ; valid
+ movx @dptr,a
+
+ mov dptr,#EP1OUTBC ; "arm" it
+ mov a,#00h
+ movx @DPTR,a ; can receive data
+ lcall syncdelay ; wait until we can write again
+ movx @dptr,a ; make shure its really empty
+ lcall syncdelay ; wait
+
+ mov DPTR,#EP6CFG ; ISO data from here to the host
+ mov a,#11010010b ; Valid
+ movx @DPTR,a ; ISO transfer, double buffering
+
+ mov DPTR,#EP8CFG ; EP8
+ mov a,#11100000b ; BULK data from here to the host
+ movx @DPTR,a ;
+
+ mov dptr,#PORTACFG
+ mov a,#1 ; interrupt on pin A0
+ lcall syncdelaywr
+
+ ;; enable interrupts
+ mov dptr,#EPIE ; interrupt enable
+ mov a,#10001100b ; enable irq for ep1out,8,ep1in
+ movx @dptr,a ; do it
+
+ mov dptr,#EPIRQ ; clear IRQs
+ mov a,#10001100b
+ movx @dptr,a
+
+ mov DPTR,#USBIE ; USB int enables register
+ mov a,#2 ; enables SOF (1ms/125us interrupt)
+ movx @DPTR,a ;
+
+ setb TCON.0 ; make INT0 edge triggered, falling edge
+
+ mov EIE,#00000001b ; enable INT2/USBINT in the 8051's SFR
+ mov IE,#81h ; IE, enable all interrupts and INT0
+
+ ret
+
+
+;;; Reads one ADC channel from the converter and stores
+;;; the result at dptr
+readADCch:
+ ;; reading data is done by just dropping /CS and start reading and
+ ;; while keeping the IN signal to the ADC inactive
+ clr IOA.5 ; /cs to 0
+
+ ;; 1st byte: STATUS
+ lcall recSPI ; index
+ movx @dptr,a ; store the byte
+ inc dptr ; increment pointer
+
+ ;; 2nd byte: MSB
+ lcall recSPI ; data
+ movx @dptr,a
+ inc dptr
+
+ ;; 3rd byte: MSB-1
+ lcall recSPI ; data
+ movx @dptr,a
+ inc dptr
+
+ ;; 4th byte: LSB
+ lcall recSPI ; data
+ movx @dptr,a
+ inc dptr
+
+ ;; got all bytes
+ setb IOA.5 ; /cs to 1
+
+ ret
+
+
+
+;;; interrupt-routine for SOF
+sof_isr:
+ push dps
+ push dpl
+ push dph
+ push dpl1
+ push dph1
+ push acc
+ push psw
+ push 00h ; R0
+ push 01h ; R1
+ push 02h ; R2
+ push 03h ; R3
+ push 04h ; R4
+ push 05h ; R5
+ push 06h ; R6
+ push 07h ; R7
+
+ mov r0,#INTCTR ; interval counter
+ mov a,@r0 ; get the value
+ dec a ; decrement
+ mov @r0,a ; save it again
+ jz sof_adc ; we do ADC functions
+ ljmp epfull ; we skip all adc functions
+
+sof_adc:
+ mov r1,#INTERVAL ; get the interval
+ mov a,@r1 ; get it
+ mov @r0,a ; save it in the counter
+ mov a,EP2468STAT
+ anl a,#20H ; full?
+ jnz epfull ; EP6-buffer is full
+
+ mov a,IOA ; conversion running?
+ jb ACC.7,epfull
+
+ ;; make sure that we are starting with the first channel
+ mov r0,#MUXSG0 ;
+ mov a,@r0 ; get config of MUXSG0
+ mov r0,a
+ mov a,#04H ; MUXSG0
+ lcall registerWrite ; this resets the channel sequence
+
+ setb IOA.7 ; start converter, START = 1
+
+ mov dptr,#0f800h ; EP6 buffer
+ mov a,IOD ; get DIO D
+ movx @dptr,a ; store it
+ inc dptr ; next byte
+ mov a,IOC ; get DIO C
+ movx @dptr,a ; store it
+ inc dptr ; next byte
+ mov a,IOB ; get DIO B
+ movx @dptr,a ; store it
+ inc dptr ; next byte
+ mov a,#0 ; just zero
+ movx @dptr,a ; pad it up
+ inc dptr ; algin along a 32 bit word
+ mov DPTRL,dpl
+ mov DPTRH,dph
+
+ mov r0,#MAXSMPL
+ mov a,@r0
+ mov SMPLCTR,a
+
+ mov ASYNC_ON,#1
+
+epfull:
+ ;; do the D/A conversion
+ mov a,EP2468STAT
+ anl a,#01H ; empty
+ jnz epempty ; nothing to get
+
+ mov dptr,#0F000H ; EP2 fifo buffer
+ lcall dalo ; conversion
+
+ mov dptr,#EP2BCL ; "arm" it
+ mov a,#00h
+ lcall syncdelaywr ; wait for the rec to sync
+ lcall syncdelaywr ; wait for the rec to sync
+
+epempty:
+ mov a,IOA ; conversion running?
+ jb ACC.7,sofend
+
+ lcall DAsend
+
+sofend:
+ ;; clear INT2
+ mov a,EXIF ; FIRST clear the USB (INT2) interrupt request
+ clr acc.4
+ mov EXIF,a ; Note: EXIF reg is not 8051 bit-addressable
+
+ mov DPTR,#USBIRQ ; points to the SOF
+ mov a,#2 ; clear the SOF
+ movx @DPTR,a
+
+nosof:
+ pop 07h
+ pop 06h
+ pop 05h
+ pop 04h ; R4
+ pop 03h ; R3
+ pop 02h ; R2
+ pop 01h ; R1
+ pop 00h ; R0
+ pop psw
+ pop acc
+ pop dph1
+ pop dpl1
+ pop dph
+ pop dpl
+ pop dps
+ reti
+
+
+reset_ep8:
+ ;; erase all data in ep8
+ mov dptr,#FIFORESET
+ mov a,#80H ; NAK
+ lcall syncdelaywr
+ mov dptr,#FIFORESET
+ mov a,#8 ; reset EP8
+ lcall syncdelaywr
+ mov dptr,#FIFORESET
+ mov a,#0 ; normal operation
+ lcall syncdelaywr
+ ret
+
+
+reset_ep6:
+ ;; throw out old data
+ mov dptr,#FIFORESET
+ mov a,#80H ; NAK
+ lcall syncdelaywr
+ mov dptr,#FIFORESET
+ mov a,#6 ; reset EP6
+ lcall syncdelaywr
+ mov dptr,#FIFORESET
+ mov a,#0 ; normal operation
+ lcall syncdelaywr
+ ret
+
+
+;;; configure the ADC converter
+;;; the dptr points to the init data:
+;;; CONFIG 0,1,3,4,5,6
+;;; note that CONFIG2 is omitted
+configADC:
+ clr IOA.7 ; stops ADC: START line of ADC = L
+ setb IOA.5 ; ADC /cs to 1
+
+ ;; just in case something has gone wrong
+ nop
+ nop
+ nop
+
+ mov a,#11000000b ; reset the ADC
+ clr IOA.5 ; ADC /cs to 0
+ lcall sendSPI
+ setb IOA.5 ; ADC /cs to 1
+
+ movx a,@dptr ;
+ inc dptr
+ mov r0,a
+ mov a,#00H ; CONFIG0
+ lcall registerWrite
+
+ movx a,@dptr ;
+ inc dptr
+ mov r0,a
+ mov a,#01H ; CONFIG1
+ lcall registerWrite
+
+ movx a,@dptr ;
+ inc dptr
+ mov r0,a
+ mov a,#03H ; MUXDIF
+ lcall registerWrite
+
+ movx a,@dptr ;
+ inc dptr
+ mov r0,#MUXSG0
+ mov @r0,a ; store it for reset purposes
+ mov r0,a
+ mov a,#04H ; MUXSG0
+ lcall registerWrite
+
+ movx a,@dptr ;
+ inc dptr
+ mov r0,a
+ mov a,#05H ; MUXSG1
+ lcall registerWrite
+
+ movx a,@dptr ;
+ inc dptr
+ mov r0,a
+ mov a,#06H ; SYSRED
+ lcall registerWrite
+
+ ret
+
+
+;;; interrupt-routine for ep1out
+;;; receives the channel list and other commands
+ep1out_isr:
+ push dps
+ push dpl
+ push dph
+ push dpl1
+ push dph1
+ push acc
+ push psw
+ push 00h ; R0
+ push 01h ; R1
+ push 02h ; R2
+ push 03h ; R3
+ push 04h ; R4
+ push 05h ; R5
+ push 06h ; R6
+ push 07h ; R7
+
+ mov dptr,#0E780h ; FIFO buffer of EP1OUT
+ movx a,@dptr ; get the first byte
+ mov r0,#CMD_FLAG ; pointer to the command byte
+ mov @r0,a ; store the command byte for ep8
+
+ mov dptr,#ep1out_jmp; jump table for the different functions
+ rl a ; multiply by 2: sizeof sjmp
+ jmp @a+dptr ; jump to the jump table
+ ;; jump table, corresponds to the command bytes defined
+ ;; in usbdux.c
+ep1out_jmp:
+ sjmp startadc ; a=0
+ sjmp single_da ; a=1
+ sjmp config_digital_b; a=2
+ sjmp write_digital_b ; a=3
+ sjmp initsgADchannel ; a=4
+ sjmp nothing ; a=5
+ sjmp nothing ; a=6
+ sjmp pwm_on ; a=7
+ sjmp pwm_off ; a=8
+ sjmp startadcint ; a=9
+
+nothing:
+ ljmp over_da
+
+pwm_on:
+ lcall startPWM
+ sjmp over_da
+
+pwm_off:
+ lcall stopPWM
+ sjmp over_da
+
+initsgADchannel:
+ mov ASYNC_ON,#0
+
+ mov dptr,#0e781h ; FIFO buffer of EP1OUT
+ lcall configADC ; configures the ADC esp sel the channel
+
+ lcall reset_ep8 ; reset FIFO: get rid of old bytes
+ ;; Save new A/D data in EP8. This is the first byte
+ ;; the host will read during an INSN. If there are
+ ;; more to come they will be handled by the ISR of
+ ;; ep8.
+ lcall ep8_ops ; get A/D data
+
+ sjmp over_da
+
+startadcint:
+ mov dptr,#0e781h ; FIFO buffer of EP1OUT from 2nd byte
+
+ movx a,@dptr ; interval is the 1st byte
+ inc dptr ; data pointer
+ sjmp startadc2 ; the other paramters as with startadc
+
+;;; config AD:
+;;; we write to the registers of the A/D converter
+startadc:
+ mov dptr,#0e781h ; FIFO buffer of EP1OUT from 2nd byte
+
+ mov a,#1 ; interval is 1 here all the time
+startadc2:
+ mov r0,#INTERVAL ; set it
+ mov @r0,a
+ mov r0,#INTCTR ; the counter is also just one
+ mov @r0,a
+
+ movx a,@dptr ; get length of channel list
+ inc dptr
+ mov r0,#MAXSMPL
+ mov @r0,a ; length of the channel list
+ mov SMPLCTR,a
+
+ lcall configADC ; configures all registers
+
+ mov ASYNC_ON,#1 ; async enable
+
+ lcall reset_ep6 ; reset FIFO
+
+ ;; load new A/D data into EP6
+ ;; This must be done. Otherwise the ISR is never called.
+ ;; The ISR is only called when data has _left_ the
+ ;; ep buffer here it has to be refilled.
+ lcall ep6_arm ; fill with dummy data
+
+ sjmp over_da
+
+;;; Single DA conversion. The 2 bytes are in the FIFO buffer
+single_da:
+ mov dptr,#0e781h ; FIFO buffer of EP1OUT
+ lcall dalo ; conversion
+ sjmp over_da
+
+;;; configure the port B as input or output (bitwise)
+config_digital_b:
+ mov dptr,#0e781h ; FIFO buffer of EP1OUT
+ movx a,@dptr ; get the second byte
+ inc dptr
+ mov OEB,a ; set the output enable bits
+ movx a,@dptr ; get the second byte
+ inc dptr
+ mov OEC,a
+ movx a,@dptr ; get the second byte
+ inc dptr
+ mov OED,a
+ sjmp over_da
+
+;;; Write one byte to the external digital port B
+;;; and prepare for digital read
+write_digital_b:
+ mov dptr,#0e781h ; FIFO buffer of EP1OUT
+ movx a,@dptr ; command[1]
+ inc dptr
+ mov OEB,a ; output enable
+ movx a,@dptr ; command[2]
+ inc dptr
+ mov OEC,a
+ movx a,@dptr ; command[3]
+ inc dptr
+ mov OED,a
+ movx a,@dptr ; command[4]
+ inc dptr
+ mov IOB,a ;
+ movx a,@dptr ; command[5]
+ inc dptr
+ mov IOC,a
+ movx a,@dptr ; command[6]
+ inc dptr
+ mov IOD,a
+
+ lcall reset_ep8 ; reset FIFO of ep 8
+
+ ;; fill ep8 with new data from port B
+ ;; When the host requests the data it's already there.
+ ;; This must be so. Otherwise the ISR is not called.
+ ;; The ISR is only called when a packet has been delivered
+ ;; to the host. Thus, we need a packet here in the
+ ;; first instance.
+ lcall ep8_ops ; get digital data
+
+ ;;
+ ;; for all commands the same
+over_da:
+ mov dptr,#EP1OUTBC
+ mov a,#00h
+ lcall syncdelaywr ; arm
+ lcall syncdelaywr ; arm
+ lcall syncdelaywr ; arm
+
+ ;; clear INT2
+ mov a,EXIF ; FIRST clear the USB (INT2) interrupt request
+ clr acc.4
+ mov EXIF,a ; Note: EXIF reg is not 8051 bit-addressable
+
+ mov DPTR,#EPIRQ ;
+ mov a,#00001000b ; clear the ep1outirq
+ movx @DPTR,a
+
+ pop 07h
+ pop 06h
+ pop 05h
+ pop 04h ; R4
+ pop 03h ; R3
+ pop 02h ; R2
+ pop 01h ; R1
+ pop 00h ; R0
+ pop psw
+ pop acc
+ pop dph1
+ pop dpl1
+ pop dph
+ pop dpl
+ pop dps
+ reti
+
+
+
+;;; save all DA channels from the endpoint buffer in a local buffer
+dalo:
+ movx a,@dptr ; number of bytes to send out
+ inc dptr ; pointer to the first byte
+ mov r1,#DABUFFER ; buffer for DA values
+ mov @r1,a ; save it
+ inc r1 ; inc pointer to local buffer
+ mov r0,a ; counter
+nextDAlo:
+ movx a,@dptr ; get the byte
+ inc dptr ; point to the high byte
+ mov @r1,a ; save it in the buffer
+ inc r1
+ movx a,@dptr ; get the channel number
+ inc dptr ; get ready for the next channel
+ mov @r1,a ; save it
+ inc r1
+ djnz r0,nextDAlo ; next channel
+ ret
+
+
+;;; write to the DA converter
+DAsend:
+ mov r1,#DABUFFER ; buffer of the DA values
+ mov a,@r1 ; get the channel count
+ jz DAret ; nothing to do
+ inc r1 ; pointer to the first byte
+ mov r0,a ; counter
+nextDA:
+ mov a,@r1 ; get the byte
+ inc r1 ; point to the high byte
+ mov r3,a ; store in r3 for writeDA
+ mov a,@r1 ; get the channel number
+ inc r1 ; get ready for the next channel
+ push 1 ; is modified in the subroutine
+ lcall writeDA ; write value to the DAC
+ pop 1 ; get the pointer back
+ djnz r0,nextDA ; next channel
+DAret:
+ ret
+
+
+
+;;; D/A-conversion:
+;;; channel number in a
+;;; value in r3
+writeDA:
+ anl a,#00000011b ; 4 channels
+ mov r1,#6 ; the channel number needs to be shifted up
+writeDA2:
+ rl a ; bit shift to the left
+ djnz r1,writeDA2 ; do it 6 times
+ orl a,#00010000b ; update outputs after write
+ mov r2,a ; backup
+ mov a,r3 ; get byte
+ anl a,#11110000b ; get the upper nibble
+ mov r1,#4 ; shift it up to the upper nibble
+writeDA3:
+ rr a ; shift to the upper to the lower
+ djnz r1,writeDA3
+ orl a,r2 ; merge with the channel info
+ clr IOA.6 ; /SYNC (/CS) of the DA to 0
+ lcall sendSPI ; send it out to the SPI
+ mov a,r3 ; get data again
+ anl a,#00001111b ; get the lower nibble
+ mov r1,#4 ; shift that to the upper
+writeDA4:
+ rl a
+ djnz r1,writeDA4
+ anl a,#11110000b ; make sure that's empty
+ lcall sendSPI
+ setb IOA.6 ; /SYNC (/CS) of the DA to 1
+noDA: ret
+
+
+
+;;; arm ep6: this is just a dummy arm to get things going
+ep6_arm:
+ mov DPTR,#EP6BCH ; byte count H
+ mov a,#0 ; is zero
+ lcall syncdelaywr ; wait until the length has arrived
+
+ mov DPTR,#EP6BCL ; byte count L
+ mov a,#1 ; is one
+ lcall syncdelaywr ; wait until the length has been proc
+ ret
+
+
+
+;;; converts one analog/digital channel and stores it in EP8
+;;; also gets the content of the digital ports B,C and D depending on
+;;; the COMMAND flag
+ep8_ops:
+ mov dptr,#0fc01h ; ep8 fifo buffer
+ clr a ; high byte
+ movx @dptr,a ; set H=0
+ mov dptr,#0fc00h ; low byte
+ mov r0,#CMD_FLAG
+ mov a,@r0
+ movx @dptr,a ; save command byte
+
+ mov dptr,#ep8_jmp ; jump table for the different functions
+ rl a ; multiply by 2: sizeof sjmp
+ jmp @a+dptr ; jump to the jump table
+ ;; jump table, corresponds to the command bytes defined
+ ;; in usbdux.c
+ep8_jmp:
+ sjmp ep8_err ; a=0, err
+ sjmp ep8_err ; a=1, err
+ sjmp ep8_err ; a=2, err
+ sjmp ep8_dio ; a=3, digital read
+ sjmp ep8_sglchannel ; a=4, analog A/D
+ sjmp ep8_err ; a=5, err
+ sjmp ep8_err ; a=6, err
+
+ ;; read one A/D channel
+ep8_sglchannel:
+ setb IOA.7 ; start converter, START = 1
+ ;; we do polling: we wait until DATA READY is zero
+sglchwait:
+ mov a,IOA ; get /DRDY
+ jb ACC.0,sglchwait ; wait until data ready (DRDY=0)
+ mov DPTR,#0fc01h ; EP8 FIFO
+ lcall readADCch ; get one reading
+ clr IOA.7 ; stop the converter, START = 0
+
+ sjmp ep8_send ; send the data
+
+ ;; read the digital lines
+ep8_dio:
+ mov DPTR,#0fc01h ; store the contents of port B
+ mov a,IOB ; in the next
+ movx @dptr,a ; entry of the buffer
+ inc dptr
+ mov a,IOC ; port C
+ movx @dptr,a ; next byte of the EP
+ inc dptr
+ mov a,IOD
+ movx @dptr,a ; port D
+
+ep8_send:
+ mov DPTR,#EP8BCH ; byte count H
+ mov a,#0 ; is zero
+ lcall syncdelaywr
+
+ mov DPTR,#EP8BCL ; byte count L
+ mov a,#10H ; 16 bytes, bec it's such a great number...
+ lcall syncdelaywr ; send the data over to the host
+
+ep8_err:
+ ret
+
+
+
+;;; EP8 interrupt is the endpoint which sends data back after a command
+;;; The actual command fills the EP buffer already
+;;; but for INSNs we need to deliver more data if the count > 1
+ep8_isr:
+ push dps
+ push dpl
+ push dph
+ push dpl1
+ push dph1
+ push acc
+ push psw
+ push 00h ; R0
+ push 01h ; R1
+ push 02h ; R2
+ push 03h ; R3
+ push 04h ; R4
+ push 05h ; R5
+ push 06h ; R6
+ push 07h ; R7
+
+ lcall ep8_ops
+
+ ;; clear INT2
+ mov a,EXIF ; FIRST clear the USB (INT2) interrupt request
+ clr acc.4
+ mov EXIF,a ; Note: EXIF reg is not 8051 bit-addressable
+
+ mov DPTR,#EPIRQ ;
+ mov a,#10000000b ; clear the ep8irq
+ movx @DPTR,a
+
+ pop 07h
+ pop 06h
+ pop 05h
+ pop 04h ; R4
+ pop 03h ; R3
+ pop 02h ; R2
+ pop 01h ; R1
+ pop 00h ; R0
+ pop psw
+ pop acc
+ pop dph1
+ pop dpl1
+ pop dph
+ pop dpl
+ pop dps
+ reti
+
+
+
+;;; GPIF waveform for PWM
+waveform:
+ ;; 0 1 2 3 4 5 6 7(not used)
+ ;; len (gives 50.007Hz)
+ .db 195, 195, 195, 195, 195, 195, 1, 1
+
+ ;; opcode
+ .db 002H, 006H, 002H, 002H, 002H, 002H, 002H, 002H
+
+ ;; out
+ .db 0ffH, 0ffH, 0ffH, 0ffH, 0ffH, 0ffH, 0ffH, 0ffH
+
+ ;; log
+ .db 000H, 000H, 000H, 000H, 000H, 000H, 000H, 000H
+
+
+stopPWM:
+ mov r0,#PWMFLAG ; flag for PWM
+ mov a,#0 ; PWM (for the main loop)
+ mov @r0,a ; set it
+
+ mov dptr,#IFCONFIG ; switch off GPIF
+ mov a,#10100000b ; gpif, 30MHz, internal IFCLK
+ lcall syncdelaywr
+ ret
+
+
+;;; init PWM
+startPWM:
+ mov dptr,#IFCONFIG ; switch on IFCLK signal
+ mov a,#10100010b ; gpif, 30MHz, internal IFCLK
+ lcall syncdelaywr
+
+ mov OEB,0FFH ; output to port B
+
+ mov DPTR,#EP4CFG
+ mov a,#10100000b ; valid, out, bulk
+ movx @DPTR,a
+
+ ;; reset the endpoint
+ mov dptr,#FIFORESET
+ mov a,#80h ; NAK
+ lcall syncdelaywr
+ mov a,#84h ; reset EP4 + NAK
+ lcall syncdelaywr
+ mov a,#0 ; normal op
+ lcall syncdelaywr
+
+ mov dptr,#EP4BCL
+ mov a,#0H ; discard packets
+ lcall syncdelaywr ; empty FIFO buffer
+ lcall syncdelaywr ; empty FIFO buffer
+
+ ;; aborts all transfers by the GPIF
+ mov dptr,#GPIFABORT
+ mov a,#0ffh ; abort all transfers
+ lcall syncdelaywr
+
+ ;; wait for GPIF to finish
+wait_f_abort:
+ mov a,GPIFTRIG ; GPIF status
+ anl a,#80h ; done bit
+ jz wait_f_abort ; GPIF busy
+
+ mov dptr,#GPIFCTLCFG
+ mov a,#10000000b ; tri state for CTRL
+ lcall syncdelaywr
+
+ mov dptr,#GPIFIDLECTL
+ mov a,#11110000b ; all CTL outputs low
+ lcall syncdelaywr
+
+ ;; abort if FIFO is empty
+ mov a,#00000001b ; abort if empty
+ mov dptr,#EP4GPIFFLGSEL
+ lcall syncdelaywr
+
+ ;;
+ mov a,#00000001b ; stop if GPIF flg
+ mov dptr,#EP4GPIFPFSTOP
+ lcall syncdelaywr
+
+ ;; transaction counter
+ mov a,#0ffH
+ mov dptr,#GPIFTCB3
+ lcall syncdelaywr
+
+ ;; transaction counter
+ mov a,#0ffH
+ mov dptr,#GPIFTCB2
+ lcall syncdelaywr
+
+ ;; transaction counter
+ mov a,#0ffH ; 512 bytes
+ mov dptr,#GPIFTCB1
+ lcall syncdelaywr
+
+ ;; transaction counter
+ mov a,#0ffH
+ mov dptr,#GPIFTCB0
+ lcall syncdelaywr
+
+ ;; RDY pins. Not used here.
+ mov a,#0
+ mov dptr,#GPIFREADYCFG
+ lcall syncdelaywr
+
+ ;; drives the output in the IDLE state
+ mov a,#1
+ mov dptr,#GPIFIDLECS
+ lcall syncdelaywr
+
+ ;; direct data transfer from the EP to the GPIF
+ mov dptr,#EP4FIFOCFG
+ mov a,#00010000b ; autoout=1, byte-wide
+ lcall syncdelaywr
+
+ ;; waveform 0 is used for FIFO out
+ mov dptr,#GPIFWFSELECT
+ mov a,#00000000b
+ movx @dptr,a
+ lcall syncdelay
+
+ ;; transfer the delay byte from the EP to the waveform
+ mov dptr,#0e781h ; EP1 buffer
+ movx a,@dptr ; get the delay
+ mov dptr,#waveform ; points to the waveform
+ mov r2,#6 ; fill 6 bytes
+timloop:
+ movx @dptr,a ; save timing in a xxx
+ inc dptr
+ djnz r2,timloop ; fill the 6 delay bytes
+
+ ;; load waveform
+ mov AUTOPTRH2,#0E4H ; XDATA0H
+ lcall syncdelay
+ mov AUTOPTRL2,#00H ; XDATA0L
+ lcall syncdelay
+
+ mov dptr,#waveform ; points to the waveform
+
+ mov AUTOPTRSETUP,#7 ; autoinc and enable
+ lcall syncdelay
+
+ mov r2,#20H ; 32 bytes to transfer
+
+wavetr:
+ movx a,@dptr
+ inc dptr
+ push dpl
+ push dph
+ push dpl1
+ push dph1
+ mov dptr,#XAUTODAT2
+ movx @dptr,a
+ lcall syncdelay
+ pop dph1
+ pop dpl1
+ pop dph
+ pop dpl
+ djnz r2,wavetr
+
+ mov dptr,#OUTPKTEND
+ mov a,#084H
+ lcall syncdelaywr
+ lcall syncdelaywr
+
+ mov r0,#PWMFLAG ; flag for PWM
+ mov a,#1 ; PWM (for the main loop)
+ mov @r0,a ; set it
+
+ ret
+
+
+
+;; need to delay every time the byte counters
+;; for the EPs have been changed.
+
+syncdelay:
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ ret
+
+syncdelaywr:
+ movx @dptr,a
+ lcall syncdelay
+ ret
+
+
+
+ .org 1F00h ; lookup table at the end of memory
+
+swap_lut:
+.db 0,128,64,192,32,160,96,224,16,144,80,208,48,176,112,240,8,136
+.db 72,200,40,168,104,232,24,152,88,216,56,184,120,248,4,132,68,196,36,164,100
+.db 228,20,148,84,212,52,180,116,244,12,140,76,204,44,172,108,236,28,156,92,220
+.db 60,188,124,252,2,130,66,194,34,162,98,226,18,146,82,210,50,178,114,242,10
+.db 138,74,202,42,170,106,234,26,154,90,218,58,186,122,250,6,134,70,198,38,166
+.db 102,230,22,150,86,214,54,182,118,246,14,142,78,206,46,174,110,238,30,158,94
+.db 222,62,190,126,254,1,129,65,193,33,161,97,225,17,145,81,209,49,177,113,241,9
+.db 137,73,201,41,169,105,233,25,153,89,217,57,185,121,249,5,133,69,197,37,165
+.db 101,229,21,149,85,213,53,181,117,245,13,141,77,205,45,173,109,237,29,157,93
+.db 221,61,189,125,253,3,131,67,195,35,163,99,227,19,147,83,211,51,179,115,243,11
+.db 139,75,203,43,171,107,235,27,155,91,219,59,187,123,251,7,135,71,199,39,167
+.db 103,231,23,151,87,215,55,183,119,247,15,143,79,207,47,175,111,239,31,159,95
+.db 223,63,191,127,255
+
+
+
+
+.End
+
+
diff --git a/usbdux_firmware.bin b/usbdux_firmware.bin
new file mode 100644
index 0000000..7f537fc
--- /dev/null
+++ b/usbdux_firmware.bin
Binary files differ
diff --git a/usbduxfast_firmware.bin b/usbduxfast_firmware.bin
new file mode 100644
index 0000000..3a6441d
--- /dev/null
+++ b/usbduxfast_firmware.bin
Binary files differ
diff --git a/usbduxsigma_firmware.bin b/usbduxsigma_firmware.bin
new file mode 100644
index 0000000..b946264
--- /dev/null
+++ b/usbduxsigma_firmware.bin
Binary files differ