From 39a0d9019076a29a57a38a817b1830aef0708c11 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 28 Apr 2024 14:26:09 +0200 Subject: Adding upstream version 20230210. Signed-off-by: Daniel Baumann --- atusb/ChangeLog | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) create mode 100644 atusb/ChangeLog (limited to 'atusb/ChangeLog') diff --git a/atusb/ChangeLog b/atusb/ChangeLog new file mode 100644 index 0000000..7e1d96d --- /dev/null +++ b/atusb/ChangeLog @@ -0,0 +1,24 @@ +ChangeLog: + * 0.0 initial release + * 0.1 addition of ATUSB_TEST + * 0.2 First public release. Compatible with atusb driver in the upcoming 4.2 kernel + * 0.3 * ATUSB_EUI64_READ/WRITE for permanent EUI64 handling + * Support to run the firmware on Atmel Raven USB dongles (Alexander Aring) + * Remove FCS frame check from firmware and leave it to the driver + * Use extended operation mode for TX for automatic ACK handling + +To flash the firmware you need dfu-util on the host. Issue + + dfu-util -d 20b7:1540 -D atusb-0.3.dfu + +right after plugging the device into the USB port while the red led is still +on. + +For the Atmel Raven USB dongle a full JTAG setup is needed to flash the +firmware as no DFU bootloader is available there. + +The firmware is flashed into permanent storage and does not need to be provided +after power off. A new firmware version can be flashed the same way. + +Firmware source code is GPLv2+ and can be found here: +http://projects.qi-hardware.com/index.php/p/ben-wpan/source/tree/master/atusb/fw -- cgit v1.2.3