Adding upstream version 3.2.1+dfsg.upstream/3.2.1+dfsgupstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 694 insertions, 0 deletions

diff --git a/raddb/mods-available/ldap b/raddb/mods-available/ldap
new file mode 100644
index 0000000..bc879cc
--- /dev/null
+++ b/raddb/mods-available/ldap
@@ -0,0 +1,694 @@
+# -*- text -*-
+#
+#  $Id$
+
+#
+#  Lightweight Directory Access Protocol (LDAP)
+#
+ldap {
+	#  Note that this needs to match the name(s) in the LDAP server
+	#  certificate, if you're using ldaps.  See OpenLDAP documentation
+	#  for the behavioral semantics of specifying more than one host.
+	#
+	#  Depending on the libldap in use, server may be an LDAP URI.
+	#  In the case of OpenLDAP this allows additional the following
+	#  additional schemes:
+	#  - ldaps:// (LDAP over SSL)
+	#  - ldapi:// (LDAP over Unix socket)
+	#  - ldapc:// (Connectionless LDAP)
+	server = 'localhost'
+#	server = 'ldap.rrdns.example.org'
+#	server = 'ldap.rrdns.example.org'
+
+	#  Port to connect on, defaults to 389, will be ignored for LDAP URIs.
+#	port = 389
+
+	#  Administrator account for searching and possibly modifying.
+	#  If using SASL + KRB5 these should be commented out.
+#	identity = 'cn=admin,dc=example,dc=org'
+#	password = mypass
+
+	#  Unless overridden in another section, the dn from which all
+	#  searches will start from.
+	base_dn = 'dc=example,dc=org'
+
+	#
+	#  You can run the 'ldapsearch' command line tool using the
+	#  parameters from this module's configuration.
+	#
+	#    ldapsearch -D ${identity} -w ${password} -h ${server}  -b 'CN=user,${base_dn}'
+	#
+	#  That will give you the LDAP information for 'user'.
+	#
+	#  Group membership can be queried by using the above "ldapsearch" string,
+	#  and adding "memberof" qualifiers.  For ActiveDirectory, use:
+	#
+	#    ldapsearch ... '(&(objectClass=user)(sAMAccountName=user)(memberof=CN=group,${base_dn}))'
+	#
+	#  Where 'user' is the user as above, and 'group' is the group you are querying for.
+	#
+
+	#
+	#  SASL parameters to use for admin binds
+	#
+	#  When we're prompted by the SASL library, these control
+	#  the responses given, as well as the identity and password
+	#  directives above.
+	#
+	#  If any directive is commented out, a NULL response will be
+	#  provided to cyrus-sasl.
+	#
+	#  Unfortunately the only way to control Keberos here is through
+	#  environmental variables, as cyrus-sasl provides no API to
+	#  set the krb5 config directly.
+	#
+	#  Full documentation for MIT krb5 can be found here:
+	#
+	#	http://web.mit.edu/kerberos/krb5-devel/doc/admin/env_variables.html
+	#
+	#  At a minimum you probably want to set KRB5_CLIENT_KTNAME.
+	#
+	sasl {
+		# SASL mechanism
+#		mech = 'PLAIN'
+
+		# SASL authorisation identity to proxy.
+#		proxy = 'autz_id'
+
+		# SASL realm. Used for kerberos.
+#		realm = 'example.org'
+	}
+
+	#
+	#  Generic valuepair attribute
+	#
+
+	#  If set, this will attribute will be retrieved in addition to any
+	#  mapped attributes.
+	#
+	#  Values should be in the format:
+	#  	<radius attr> <op> <value>
+	#
+	#  Where:
+	#  	<radius attr>:	Is the attribute you wish to create
+	# 			with any valid list and request qualifiers.
+	#  	<op>: 		Is any assignment operator (=, :=, +=, -=).
+	#  	<value>:	Is the value to parse into the new valuepair.
+	# 			If the value is wrapped in double quotes it
+	#			will be xlat expanded.
+#	valuepair_attribute = 'radiusAttribute'
+
+	#
+	#  Mapping of LDAP directory attributes to RADIUS dictionary attributes.
+	#
+
+	#  WARNING: Although this format is almost identical to the unlang
+	#  update section format, it does *NOT* mean that you can use other
+	#  unlang constructs in module configuration files.
+	#
+	#  Configuration items are in the format:
+	# 	<radius attr> <op> <ldap attr>
+	#
+	#  Where:
+	#  	<radius attr>:	Is the destination RADIUS attribute
+	# 			with any valid list and request qualifiers.
+	#  	<op>: 		Is any assignment attribute (=, :=, +=, -=).
+	#  	<ldap attr>:	Is the attribute associated with user or
+	#			profile objects in the LDAP directory.
+	# 			If the attribute name is wrapped in double
+	# 			quotes it will be xlat expanded.
+	#
+	#  Request and list qualifiers may also be placed after the 'update'
+	#  section name to set defaults destination requests/lists
+	#  for unqualified RADIUS attributes.
+	#
+	#  Note: LDAP attribute names should be single quoted unless you want
+	#  the name value to be derived from an xlat expansion, or an
+	#  attribute ref.
+	update {
+		control:Password-With-Header	+= 'userPassword'
+#		control:NT-Password		:= 'ntPassword'
+#		reply:Reply-Message		:= 'radiusReplyMessage'
+#		reply:Tunnel-Type		:= 'radiusTunnelType'
+#		reply:Tunnel-Medium-Type	:= 'radiusTunnelMediumType'
+#		reply:Tunnel-Private-Group-ID	:= 'radiusTunnelPrivategroupId'
+
+		#  Where only a list is specified as the RADIUS attribute,
+		#  the value of the LDAP attribute is parsed as a valuepair
+		#  in the same format as the 'valuepair_attribute' (above).
+		control:			+= 'radiusControlAttribute'
+		request:			+= 'radiusRequestAttribute'
+		reply:				+= 'radiusReplyAttribute'
+	}
+
+	#  Set to yes if you have eDirectory and want to use the universal
+	#  password mechanism.
+#	edir = no
+
+	#  Set to yes if you want to bind as the user after retrieving the
+	#  Cleartext-Password. This will consume the login grace, and
+	#  verify user authorization.
+#	edir_autz = no
+
+	#  LDAP "bind as user" configuration to check PAP passwords.
+	#
+	#  Active Directory needs "bind as user", which can be done by
+	#  adding the following "if" statement to the authorize {} section
+	#  of the virtual server, after the "ldap" module.  For
+	#  example:
+	#
+	#    ...
+	#    ldap
+	#    if ((ok || updated) && User-Password && !control:Auth-Type) {
+	#        update {
+	#            control:Auth-Type := ldap
+	#        }
+	#    }
+	#    ...
+	#
+	#  You will also need to uncomment the "Auth-Type LDAP" block in the
+	#  "authenticate" section.
+	#
+	#  This configuration is required because AD will not return the users
+	#  "known good" password to FreeRADIUS.  Instead, FreeRADIUS has to run
+	#  "Auth-Type LDAP" in order to do an LDAP "bind as user", which will hand
+	#  the user name / password to AD for verification.
+	#
+
+	#
+	#  Name of the attribute that contains the user DN.
+	#  The default name is LDAP-UserDn.
+	#
+	#  If you have multiple LDAP instances, you should
+	#  change this configuration item to:
+	#
+	#	${.:instance}-LDAP-UserDn
+	#
+	#  That change allows the modules to set their own
+	#  User DN, and to not conflict with each other.
+	#
+	user_dn = "LDAP-UserDn"
+
+	#
+	#  User object identification.
+	#
+	user {
+		#  Where to start searching in the tree for users
+		base_dn = "${..base_dn}"
+
+		#  Filter for user objects, should be specific enough
+		#  to identify a single user object.
+		#
+		#  For Active Directory, you should use
+		#  "samaccountname=" instead of "uid="
+		#
+		filter = "(uid=%{%{Stripped-User-Name}:-%{User-Name}})"
+
+		#  For Active Directory nested group, you should comment out the previous 'filter = ...'
+		#  and use the below. Where 'group' is the group you are querying for.
+		#
+		#  NOTE: The string '1.2.840.113556.1.4.1941' specifies LDAP_MATCHING_RULE_IN_CHAIN.
+		#  This applies only to DN attributes. This is an extended match operator that walks
+		#  the chain of ancestry in objects all the way to the root until it finds a match.
+		#  This reveals group nesting. It is available only on domain controllers with
+		#  Windows Server 2003 SP2 or Windows Server 2008 (or above).
+		#
+		#  See: https://social.technet.microsoft.com/wiki/contents/articles/5392.active-directory-ldap-syntax-filters.aspx
+		#
+#		filter = "(&(objectClass=user)(sAMAccountName=%{%{Stripped-User-Name}:-%{User-Name}})(memberOf:1.2.840.113556.1.4.1941:=cn=group,${..base_dn}))"
+
+		#  SASL parameters to use for user binds
+		#
+		#  When we're prompted by the SASL library, these control
+		#  the responses given.
+		#
+		#  Any of the config items below may be an attribute ref
+		#  or and expansion, so different SASL mechs, proxy IDs
+		#  and realms may be used for different users.
+		sasl {
+			# SASL mechanism
+#			mech = 'PLAIN'
+
+			# SASL authorisation identity to proxy.
+#			proxy = &User-Name
+
+			# SASL realm. Used for kerberos.
+#			realm = 'example.org'
+		}
+
+		#  Search scope, may be 'base', 'one', sub' or 'children'
+#		scope = 'sub'
+
+		#  Server side result sorting
+		#
+		#  A list of space delimited attributes to order the result
+		#  set by, if the filter matches multiple objects.
+		#  Only the first result in the set will be processed.
+		#
+		#  If the attribute name is prefixed with a hyphen '-' the
+		#  sorting order will be reversed for that attribute.
+		#
+		#  If sort_by is set, and the server does not support sorting
+		#  the search will fail.
+#		sort_by = '-uid'
+
+		#  If this is undefined, anyone is authorised.
+		#  If it is defined, the contents of this attribute
+		#  determine whether or not the user is authorised
+#		access_attribute = 'dialupAccess'
+
+		#  Control whether the presence of 'access_attribute'
+		#  allows access, or denys access.
+		#
+		#  If 'yes', and the access_attribute is present, or
+		#  'no' and the access_attribute is absent then access
+		#  will be allowed.
+		#
+		#  If 'yes', and the access_attribute is absent, or
+		#  'no' and the access_attribute is present, then
+		#  access will not be allowed.
+		#
+		#  If the value of the access_attribute is 'false', it
+		#  will negate the result.
+		#
+		#  e.g.
+		#    access_positive = yes
+		#    access_attribute = userAccessAllowed
+		#
+		#  With an LDAP object containing:
+		#    userAccessAllowed: false
+		#
+		#  Will result in the user being locked out.
+#		access_positive = yes
+	}
+
+	#
+	#  User membership checking.
+	#
+	group {
+		#  Where to start searching in the tree for groups
+		base_dn = "${..base_dn}"
+
+		#  Filter for group objects, should match all available
+		#  group objects a user might be a member of.
+		#
+		#  If using Active Directory you are likely to need "group"
+		#  instead of "posixGroup".
+		filter = '(objectClass=posixGroup)'
+
+		# Search scope, may be 'base', 'one', sub' or 'children'
+#		scope = 'sub'
+
+		#  Attribute that uniquely identifies a group.
+		#  Is used when converting group DNs to group
+		#  names.
+#		name_attribute = cn
+
+		#  Filter to find all group objects a user is a member of.
+		#  That is, group objects with attributes that
+		#  identify members (the inverse of membership_attribute).
+		#
+		#  Note that this configuration references the "user_dn"
+		#  configuration defined above.
+		#
+#		membership_filter = "(|(member=%{control:${..user_dn}})(memberUid=%{%{Stripped-User-Name}:-%{User-Name}}))"
+
+		#  The attribute, in user objects, which contain the names
+		#  or DNs of groups a user is a member of.
+		#
+		#  Unless a conversion between group name and group DN is
+		#  needed, there's no requirement for the group objects
+		#  referenced to actually exist.
+		#
+		#  If the LDAP server does not support the "memberOf"
+		#  attribute (or equivalent), then you will need to use the
+		#  membership_filter option above instead. If you can't see
+		#  the memberOf attribute then it is also possible that the
+		#  LDAP bind user does not have the correct permissions to
+		#  view it.
+		membership_attribute = 'memberOf'
+
+		#  If cacheable_name or cacheable_dn are enabled,
+		#  all group information for the user will be
+		#  retrieved from the directory and written to LDAP-Group
+		#  attributes appropriate for the instance of rlm_ldap.
+		#
+		#  For group comparisons these attributes will be checked
+		#  instead of querying the LDAP directory directly.
+		#
+		#  This feature is intended to be used with rlm_cache.
+		#
+		#  If you wish to use this feature, you should enable
+		#  the type that matches the format of your check items
+		#  i.e. if your groups are specified as DNs then enable
+		#  cacheable_dn else enable cacheable_name.
+#		cacheable_name = 'no'
+#		cacheable_dn = 'no'
+
+		#  Override the normal cache attribute (<inst>-LDAP-Group or
+		#  LDAP-Group if using the default instance) and create a
+		#  custom attribute.  This can help if multiple module instances
+		#  are used in fail-over.
+#		cache_attribute = 'LDAP-Cached-Membership'
+
+		#  If the group being checked is specified as a name, but
+		#  the user's groups are referenced by DN, and one of those
+		#  group DNs is invalid, the whole group check is treated as
+		#  invalid, and a negative result will be returned.
+		#  When set to 'yes', this option ignores invalid DN
+		#  references.
+#		allow_dangling_group_ref = 'no'
+	}
+
+	#
+	#  User profiles. RADIUS profile objects contain sets of attributes
+	#  to insert into the request. These attributes are mapped using
+	#  the same mapping scheme applied to user objects (the update section above).
+	#
+	profile {
+		#  Filter for RADIUS profile objects
+#		filter = '(objectclass=radiusprofile)'
+
+		#  The default profile.  This may be a DN or an attribute
+		#  reference.
+		#  To get old v2.2.x style behaviour, or to use the
+		#  &User-Profile attribute to specify the default profile,
+		#  set this to &control:User-Profile.
+#		default = 'cn=radprofile,dc=example,dc=org'
+
+		#  The LDAP attribute containing profile DNs to apply
+		#  in addition to the default profile above.  These are
+		#  retrieved from the user object, at the same time as the
+		#  attributes from the update section, are are applied
+		#  if authorization is successful.
+#		attribute = 'radiusProfileDn'
+	}
+
+	#
+	#  Bulk load clients from the directory
+	#
+	client {
+		#   Where to start searching in the tree for clients
+		base_dn = "${..base_dn}"
+
+		#
+		#  Filter to match client objects
+		#
+		filter = '(objectClass=radiusClient)'
+
+		# Search scope, may be 'base', 'one', 'sub' or 'children'
+#		scope = 'sub'
+
+		#
+		#  Sets default values (not obtained from LDAP) for new client entries
+		#
+		template {
+#			login				= 'test'
+#			password			= 'test'
+#			proto	 			= tcp
+#			require_message_authenticator	= yes
+
+			# Uncomment to add a home_server with the same
+			# attributes as the client.
+#			coa_server {
+#				response_window = 2.0
+#			}
+		}
+
+		#
+		#  Client attribute mappings are in the format:
+		#      <client attribute> = <ldap attribute>
+		#
+		#  The following attributes are required:
+		#    * ipaddr | ipv4addr | ipv6addr - Client IP Address.
+		#    * secret - RADIUS shared secret.
+		#
+		#  All other attributes usually supported in a client
+		#  definition are also supported here.
+		#
+		#  Schemas are available in doc/schemas/ldap for openldap and eDirectory
+		#
+		attribute {
+			ipaddr				= 'radiusClientIdentifier'
+			secret				= 'radiusClientSecret'
+#			shortname			= 'radiusClientShortname'
+#			nas_type			= 'radiusClientType'
+#			virtual_server			= 'radiusClientVirtualServer'
+#			require_message_authenticator	= 'radiusClientRequireMa'
+		}
+	}
+
+	#  Load clients on startup
+#	read_clients = no
+
+	#
+	#  Modify user object on receiving Accounting-Request
+	#
+
+	#  Useful for recording things like the last time the user logged
+	#  in, or the Acct-Session-ID for CoA/DM.
+	#
+	#  LDAP modification items are in the format:
+	# 	<ldap attr> <op> <value>
+	#
+	#  Where:
+	#  	<ldap attr>:	The LDAP attribute to add modify or delete.
+	#  	<op>: 		One of the assignment operators:
+	#			(:=, +=, -=, ++).
+	#			Note: '=' is *not* supported.
+	#  	<value>:	The value to add modify or delete.
+	#
+	#  WARNING: If using the ':=' operator with a multi-valued LDAP
+	#  attribute, all instances of the attribute will be removed and
+	#  replaced with a single attribute.
+	accounting {
+		reference = "%{tolower:type.%{Acct-Status-Type}}"
+
+		type {
+			start {
+				update {
+					description := "Online at %S"
+				}
+			}
+
+			interim-update {
+				update {
+					description := "Last seen at %S"
+				}
+			}
+
+			stop {
+				update {
+					description := "Offline at %S"
+				}
+			}
+		}
+	}
+
+	#
+	#  Post-Auth can modify LDAP objects too
+	#
+	post-auth {
+		update {
+			description := "Authenticated at %S"
+		}
+	}
+
+	#
+	#  LDAP connection-specific options.
+	#
+	#  These options set timeouts, keep-alives, etc. for the connections.
+	#
+	options {
+		#  Control under which situations aliases are followed.
+		#  May be one of 'never', 'searching', 'finding' or 'always'
+		#  default: libldap's default which is usually 'never'.
+		#
+		#  LDAP_OPT_DEREF is set to this value.
+#		dereference = 'always'
+
+		#
+		#  The following two configuration items control whether the
+		#  server follows references returned by LDAP directory.
+		#  They are  mostly for Active Directory compatibility.
+		#  If you set these to 'no', then searches will likely return
+		#  'operations error', instead of a useful result.
+		#
+		#  'rebind' causes any connections being established to follow
+		#  referrals to be bound using the admin credentials defined
+		#  for this module.  If it is set to 'no' libldap will bind
+		#  to those connections anonymously.
+		#
+		chase_referrals = yes
+		rebind = yes
+
+		# SASL Security Properties (see SASL_SECPROPS in ldap.conf man page).
+		# Note - uncomment when using GSS-API sasl mechanism along with TLS
+		# encryption against Active-Directory LDAP servers (this disables
+		# sealing and signing at the GSS level as required by AD).
+		#sasl_secprops = 'noanonymous,noplain,maxssf=0'
+
+		#  Seconds to wait for LDAP query to finish. default: 20
+		res_timeout = 10
+
+		#  Seconds LDAP server has to process the query (server-side
+		#  time limit). default: 20
+		#
+		#  LDAP_OPT_TIMELIMIT is set to this value.
+		srv_timelimit = 3
+
+		#  Seconds to wait for response of the server. (network
+		#  failures) default: 10
+		#
+		#  LDAP_OPT_NETWORK_TIMEOUT is set to this value.
+		net_timeout = 1
+
+		#  LDAP_OPT_X_KEEPALIVE_IDLE
+		idle = 60
+
+		#  LDAP_OPT_X_KEEPALIVE_PROBES
+		probes = 3
+
+		#  LDAP_OPT_X_KEEPALIVE_INTERVAL
+		interval = 3
+
+		#  ldap_debug: debug flag for LDAP SDK
+		#  (see OpenLDAP documentation).  Set this to enable
+		#  huge amounts of LDAP debugging on the screen.
+		#  You should only use this if you are an LDAP expert.
+		#
+		#	default: 0x0000 (no debugging messages)
+		#	Example:(LDAP_DEBUG_FILTER+LDAP_DEBUG_CONNS)
+		ldap_debug = 0x0028
+	}
+
+	#
+	#  This subsection configures the tls related items
+	#  that control how FreeRADIUS connects to an LDAP
+	#  server.  It contains all of the 'tls_*' configuration
+	#  entries used in older versions of FreeRADIUS.  Those
+	#  configuration entries can still be used, but we recommend
+	#  using these.
+	#
+	#  Note that some distributions use NSS for libldap instead
+	#  of OpenSSL.
+	#
+	#  If you see something like this in the debug output:
+	#
+	#	TLSMC: MozNSS compatibility interception begins.
+	#
+	#  Then there is a problem.
+	#
+	#	THIS LDAP INSTALLATION WILL NOT WORK WITH FREERADIUS.
+	#
+	#  You MUST install fixed LDAP libraries which use OpenSSL.
+	#
+	#  For more details, see:
+	#
+	#	http://packages.networkradius.com
+	#
+	tls {
+		# Set this to 'yes' to use TLS encrypted connections
+		# to the LDAP database by using the StartTLS extended
+		# operation.
+		#
+		# The StartTLS operation is supposed to be
+		# used with normal ldap connections instead of
+		# using ldaps (port 636) connections
+#		start_tls = yes
+
+#		ca_file	= ${certdir}/cacert.pem
+
+#		ca_path	= ${certdir}
+#		certificate_file = /path/to/radius.crt
+#		private_key_file = /path/to/radius.key
+#		random_file = /dev/urandom
+
+ 		#  Certificate Verification requirements.  Can be:
+		#    'never' (do not even bother trying)
+ 		#    'allow' (try, but don't fail if the certificate
+		#		cannot be verified)
+		#    'demand' (fail if the certificate does not verify)
+		#    'hard'  (similar to 'demand' but fails if TLS
+		#             cannot negotiate)
+ 		#
+		#  The default is libldap's default, which varies based
+		#  on the contents of ldap.conf.
+
+#		require_cert	= 'demand'
+
+		#
+		#  Minimum TLS version to accept. We STRONGLY recommend
+		#  setting this to "1.2"
+		#
+#		tls_min_version = "1.2"
+	}
+
+	#  As of v3, the 'pool' section has replaced the
+	#  following v2 configuration items:
+	#
+	#  ldap_connections_number
+
+	#
+	#  The connection pool is used to pool outgoing connections.
+	#
+	#  When the server is not threaded, the connection pool
+	#  limits are ignored, and only one connection is used.
+	pool {
+		#  Connections to create during module instantiation.
+		#  If the server cannot create specified number of
+		#  connections during instantiation it will exit.
+		#  Set to 0 to allow the server to start without the
+		#  directory being available.
+		start = ${thread[pool].start_servers}
+
+		#  Minimum number of connections to keep open
+		min = ${thread[pool].min_spare_servers}
+
+		#  Maximum number of connections
+		#
+		#  If these connections are all in use and a new one
+		#  is requested, the request will NOT get a connection.
+		#
+		#  Setting 'max' to LESS than the number of threads means
+		#  that some threads may starve, and you will see errors
+		#  like 'No connections available and at max connection limit'
+		#
+		#  Setting 'max' to MORE than the number of threads means
+		#  that there are more connections than necessary.
+		max = ${thread[pool].max_servers}
+
+		#  Spare connections to be left idle
+		#
+		#  NOTE: Idle connections WILL be closed if "idle_timeout"
+		#  is set.  This should be less than or equal to "max" above.
+		spare = ${thread[pool].max_spare_servers}
+
+		#  Number of uses before the connection is closed
+		#
+		#  0 means "infinite"
+		uses = 0
+
+		#  The number of seconds to wait after the server tries
+		#  to open a connection, and fails.  During this time,
+		#  no new connections will be opened.
+		retry_delay = 30
+
+		#  The lifetime (in seconds) of the connection
+		lifetime = 0
+
+		#  Idle timeout (in seconds).  A connection which is
+		#  unused for this length of time will be closed.
+		idle_timeout = 60
+
+		#  NOTE: All configuration settings are enforced.  If a
+		#  connection is closed because of 'idle_timeout',
+		#  'uses', or 'lifetime', then the total number of
+		#  connections MAY fall below 'min'.  When that
+		#  happens, it will open a new connection.  It will
+		#  also log a WARNING message.
+		#
+		#  The solution is to either lower the 'min' connections,
+		#  or increase lifetime/idle_timeout.
+	}
+}