diff options
Diffstat (limited to 'raddb/mods-available/rest')
| -rw-r--r-- | raddb/mods-available/rest | 289 |
1 files changed, 289 insertions, 0 deletions
diff --git a/raddb/mods-available/rest b/raddb/mods-available/rest new file mode 100644 index 0000000..2860aa3 --- /dev/null +++ b/raddb/mods-available/rest @@ -0,0 +1,289 @@ +rest { + # + # This subsection configures the tls related items + # that control how FreeRADIUS connects to a HTTPS + # server. + # + tls { + # Certificate Authorities: + # "ca_file" (libcurl option CURLOPT_ISSUERCERT). + # File containing a single CA, which is the issuer of the server + # certificate. + # "ca_info_file" (libcurl option CURLOPT_CAINFO). + # File containing a bundle of certificates, which allow to handle + # certificate chain validation. + # "ca_path" (libcurl option CURLOPT_CAPATH). + # Directory holding CA certificates to verify the peer with. +# ca_file = ${certdir}/cacert.pem +# ca_info_file = ${certdir}/cacert_bundle.pem +# ca_path = ${certdir} + +# certificate_file = /path/to/radius.crt +# private_key_file = /path/to/radius.key +# private_key_password = "supersecret" +# random_file = /dev/urandom + + # Server certificate verification requirements. Can be: + # "no" (don't even bother trying) + # "yes" (verify the cert was issued by one of the + # trusted CAs) + # + # The default is "yes" +# check_cert = yes + + # Server certificate CN verification requirements. Can be: + # "no" (don't even bother trying) + # "yes" (verify the CN in the certificate matches the host + # in the URI) + # + # The default is "yes" +# check_cert_cn = yes + } + + # rlm_rest will open a connection to the server specified in connect_uri + # to populate the connection cache, ready for the first request. + # The server will not start if the server specified is unreachable. + # + # If you wish to disable this pre-caching and reachability check, + # comment out the configuration item below. + connect_uri = "http://127.0.0.1/" + + # + # How long before new connection attempts timeout, defaults to 4.0 seconds. + # +# connect_timeout = 4.0 + + # + # Specify HTTP protocol version to use. one of '1.0', '1.1', '2.0', '2.0+auto', + # '2.0+tls' or 'default'. (libcurl option CURLOPT_HTTP_VERSION) + # +# http_negotiation = 1.1 + + # + # The following config items can be used in each of the sections. + # The sections themselves reflect the sections in the server. + # For example if you list rest in the authorize section of a virtual server, + # the settings from the authorize section here will be used. + # + # The following config items may be listed in any of the sections: + # uri - to send the request to. + # method - HTTP method to use, one of 'get', 'post', 'put', 'patch', + # 'delete' or any custom HTTP method. + # body - The format of the HTTP body sent to the remote server. + # May be 'none', 'post' or 'json', defaults to 'none'. + # attr_num - If true, the attribute number is supplied for each attribute. + # Defaults to false. + # raw_value - If true, enumerated attribute values are provided as numeric + # values. Defaults to false. + # data - Send custom freeform data in the HTTP body. Content-type + # may be specified with 'body'. Will be expanded. + # Values from expansion will not be escaped, this should be + # done using the appropriate xlat method e.g. %{urlencode:<attr>}. + # force_to - Force the response to be decoded with this decoder. + # May be 'plain' (creates reply:REST-HTTP-Body), 'post' + # or 'json'. + # tls - TLS settings for HTTPS. + # auth - HTTP auth method to use, one of 'none', 'srp', 'basic', + # 'digest', 'digest-ie', 'gss-negotiate', 'ntlm', + # 'ntlm-winbind', 'any', 'safe'. defaults to 'none'. + # username - User to authenticate as, will be expanded. + # password - Password to use for authentication, will be expanded. + # require_auth - Require HTTP authentication. + # timeout - HTTP request timeout in seconds, defaults to 4.0. + # chunk - Chunk size to use. If set, HTTP chunked encoding is used to + # send data to the REST server. Make sure that this is large + # enough to fit your largest attribute value's text + # representation. + # A number like 8192 is good. + # + # Additional HTTP headers may be specified with control:REST-HTTP-Header. + # The values of those attributes should be in the format: + # + # control:REST-HTTP-Header := "<HTTP attribute>: <value>" + # + # The control:REST-HTTP-Header attributes will be consumed + # (i.e. deleted) after each call to the rest module, and each + # %{rest:} expansion. This is so that headers from one REST + # call do not affect headers from a different REST call. + # + # Body encodings are the same for requests and responses + # + # POST - All attributes and values are urlencoded + # [outer.][<list>:]<attribute0>=<value0>&[outer.][<list>:]<attributeN>=<valueN> + # + # JSON - All attributes and values are escaped according to the JSON specification + # - attribute Name of the attribute. + # - attr_num Number of the attribute. Only available if the configuration item + # 'attr_num' is enabled. + # - type Type of the attribute (e.g. "integer", "string", "ipaddr", "octets", ...). + # - value Attribute value, for enumerated attributes the human readable value is + # provided and not the numeric value (Depends on the 'raw_value' config item). + # { + # "<attribute0>":{ + # "attr_num":<attr_num0>, + # "type":"<type0>", + # "value":[<value0>,<value1>,<valueN>] + # }, + # "<attribute1>":{ + # "attr_num":<attr_num1>, + # "type":"<type1>", + # "value":[...] + # }, + # "<attributeN>":{ + # "attr_num":<attr_numN>, + # "type":"<typeN>", + # "value":[...] + # }, + # } + # + # The response format adds three optional fields: + # - do_xlat If true, any values will be xlat expanded. Defaults to true. + # - is_json If true, any nested JSON data will be copied to the attribute + # in string form. Defaults to true. + # - op Controls how the attribute is inserted into the target list. + # Defaults to ':='. To create multiple attributes from multiple + # values, this should be set to '+=', otherwise only the last + # value will be used, and it will be assigned to a single + # attribute. + # { + # "<attribute0>":{ + # "is_json":<bool>, + # "do_xlat":<bool>, + # "op":"<operator>", + # "value":[<value0>,<value1>,<valueN>] + # }, + # "<attribute1>":"value", + # "<attributeN>":{ + # "value":[<value0>,<value1>,<valueN>], + # "op":"+=" + # } + # } + + # + # Module return codes are determined by HTTP response codes. These vary depending on the + # section. + # + # If the body is processed and found to be malformed or unsupported fail will be returned. + # If the body is processed and found to contain attribute updated will be returned, + # except in the case of a 401 code. + # + + # Authorize/Authenticate + # + # Code Meaning Process body Module code + # 404 not found no notfound + # 410 gone no notfound + # 403 forbidden no userlock + # 401 unauthorized yes reject + # 204 no content no ok + # 2xx successful yes ok/updated + # 5xx server error no fail + # xxx - no invalid + # + # The status code is held in %{reply:REST-HTTP-Status-Code}. + # + authorize { + uri = "${..connect_uri}/user/%{User-Name}/mac/%{Called-Station-ID}?action=authorize" + method = 'get' + tls = ${..tls} + } + authenticate { + uri = "${..connect_uri}/user/%{User-Name}/mac/%{Called-Station-ID}?action=authenticate" + method = 'get' + tls = ${..tls} + } + + # Preacct/Accounting/Post-auth/Pre-Proxy/Post-Proxy + # + # Code Meaning Process body Module code + # 204 no content no ok + # 2xx successful yes ok/updated + # 5xx server error no fail + # xxx - no invalid + preacct { + uri = "${..connect_uri}/user/%{User-Name}/sessions/%{Acct-Unique-Session-ID}?action=preacct" + method = 'post' + tls = ${..tls} + } + accounting { + uri = "${..connect_uri}/user/%{User-Name}/sessions/%{Acct-Unique-Session-ID}?action=accounting" + method = 'post' + tls = ${..tls} + } + post-auth { + uri = "${..connect_uri}/user/%{User-Name}/mac/%{Called-Station-ID}?action=post-auth" + method = 'post' + tls = ${..tls} + } + pre-proxy { + uri = "${..connect_uri}/user/%{User-Name}/mac/%{Called-Station-ID}?action=pre-proxy" + method = 'post' + tls = ${..tls} + } + post-proxy { + uri = "${..connect_uri}/user/%{User-Name}/mac/%{Called-Station-ID}?action=post-proxy" + method = 'post' + tls = ${..tls} + } + + # + # The connection pool is used to pool outgoing connections. + # + pool { + # Connections to create during module instantiation. + # If the server cannot create specified number of + # connections during instantiation it will exit. + # Set to 0 to allow the server to start without the + # web service being available. + start = ${thread[pool].start_servers} + + # Minimum number of connections to keep open + min = ${thread[pool].min_spare_servers} + + # Maximum number of connections + # + # If these connections are all in use and a new one + # is requested, the request will NOT get a connection. + # + # Setting 'max' to LESS than the number of threads means + # that some threads may starve, and you will see errors + # like 'No connections available and at max connection limit' + # + # Setting 'max' to MORE than the number of threads means + # that there are more connections than necessary. + max = ${thread[pool].max_servers} + + # Spare connections to be left idle + # + # NOTE: Idle connections WILL be closed if "idle_timeout" + # is set. This should be less than or equal to "max" above. + spare = ${thread[pool].max_spare_servers} + + # Number of uses before the connection is closed + # + # 0 means "infinite" + uses = 0 + + # The number of seconds to wait after the server tries + # to open a connection, and fails. During this time, + # no new connections will be opened. + retry_delay = 30 + + # The lifetime (in seconds) of the connection + lifetime = 0 + + # idle timeout (in seconds). A connection which is + # unused for this length of time will be closed. + idle_timeout = 60 + + # NOTE: All configuration settings are enforced. If a + # connection is closed because of "idle_timeout", + # "uses", or "lifetime", then the total number of + # connections MAY fall below "min". When that + # happens, it will open a new connection. It will + # also log a WARNING message. + # + # The solution is to either lower the "min" connections, + # or increase lifetime/idle_timeout. + } +} |