diff options
Diffstat (limited to 'raddb/mods-available/sql')
| -rw-r--r-- | raddb/mods-available/sql | 371 |
1 files changed, 371 insertions, 0 deletions
diff --git a/raddb/mods-available/sql b/raddb/mods-available/sql new file mode 100644 index 0000000..7bcb664 --- /dev/null +++ b/raddb/mods-available/sql @@ -0,0 +1,371 @@ +# -*- text -*- +## +## mods-available/sql -- SQL modules +## +## $Id$ + +###################################################################### +# +# Configuration for the SQL module +# +# The database schemas and queries are located in subdirectories: +# +# sql/<DB>/main/schema.sql Schema +# sql/<DB>/main/queries.conf Authorisation and Accounting queries +# +# Where "DB" is mysql, mssql, oracle, or postgresql. +# +# The name used to query SQL is sql_user_name, which is set in the file +# +# raddb/mods-config/sql/main/${dialect}/queries.conf +# +# If you are using realms, that configuration should be changed to use +# the Stripped-User-Name attribute. See the comments around sql_user_name +# for more information. +# + +sql { + # + # The dialect of SQL being used. + # + # Allowed dialects are: + # + # mssql + # mysql + # oracle + # postgresql + # sqlite + # mongo + # + dialect = "sqlite" + + # + # The driver module used to execute the queries. Since we + # don't know which SQL drivers are being used, the default is + # "rlm_sql_null", which just logs the queries to disk via the + # "logfile" directive, below. + # + # In order to talk to a real database, delete the next line, + # and uncomment the one after it. + # + # If the dialect is "mssql", then the driver should be set to + # one of the following values, depending on your system: + # + # rlm_sql_db2 + # rlm_sql_firebird + # rlm_sql_freetds + # rlm_sql_iodbc + # rlm_sql_unixodbc + # + driver = "rlm_sql_null" +# driver = "rlm_sql_${dialect}" + + # + # Driver-specific subsections. They will only be loaded and + # used if "driver" is something other than "rlm_sql_null". + # When a real driver is used, the relevant driver + # configuration section is loaded, and all other driver + # configuration sections are ignored. + # + sqlite { + # Path to the sqlite database + filename = "/tmp/freeradius.db" + + # How long to wait for write locks on the database to be + # released (in ms) before giving up. + busy_timeout = 200 + + # If the file above does not exist and bootstrap is set + # a new database file will be created, and the SQL statements + # contained within the bootstrap file will be executed. + bootstrap = "${modconfdir}/${..:name}/main/sqlite/schema.sql" + } + + mysql { + # If any of the files below are set, TLS encryption is enabled + tls { + ca_file = "/etc/ssl/certs/my_ca.crt" + ca_path = "/etc/ssl/certs/" + certificate_file = "/etc/ssl/certs/private/client.crt" + private_key_file = "/etc/ssl/certs/private/client.key" + cipher = "DHE-RSA-AES256-SHA:AES128-SHA" + + tls_required = yes + tls_check_cert = no + tls_check_cert_cn = no + } + + # If yes, (or auto and libmysqlclient reports warnings are + # available), will retrieve and log additional warnings from + # the server if an error has occured. Defaults to 'auto' + warnings = auto + } + + postgresql { + + # unlike MySQL, which has a tls{} connection configuration, postgresql + # uses its connection parameters - see the radius_db option below in + # this file + + # Send application_name to the postgres server + # Only supported in PG 9.0 and greater. Defaults to no. + send_application_name = yes + + # + # The default application name is "FreeRADIUS - .." with the current version. + # The application name can be customized here to any non-zero value. + # +# application_name = "" + } + + # + # Configuration for Mongo. + # + # Note that the Mongo driver is experimental. The FreeRADIUS developers + # are unable to help with the syntax of the Mongo queries. Please see + # the Mongo documentation for that syntax. + # + # The Mongo driver supports only the following methods: + # + # aggregate + # findAndModify + # findOne + # insert + # + # For examples, see the query files: + # + # raddb/mods-config/sql/main/mongo/queries.conf + # raddb/mods-config/sql/main/ippool/queries.conf + # + # In order to use findAndModify with an aggretation pipleline, make + # sure that you are running MongoDB version 4.2 or greater. FreeRADIUS + # assumes that the paramaters passed to the methods are supported by the + # version of MongoDB which it is connected to. + # + mongo { + # + # The application name to use. + # + appname = "freeradius" + + # + # The TLS parameters here map directly to the Mongo TLS configuration + # + tls { + certificate_file = /path/to/file + certificate_password = "password" + ca_file = /path/to/file + ca_dir = /path/to/directory + crl_file = /path/to/file + weak_cert_validation = false + allow_invalid_hostname = false + } + } + + # Connection info: + # +# server = "localhost" +# port = 3306 +# login = "radius" +# password = "radpass" + + # Connection info for Mongo + # Authentication Without SSL + # server = "mongodb://USER:PASSWORD@192.16.0.2:PORT/DATABASE?authSource=admin&ssl=false" + + # Authentication With SSL + # server = "mongodb://USER:PASSWORD@192.16.0.2:PORT/DATABASE?authSource=admin&ssl=true" + + # Authentication with Certificate + # Use this command for retrieve Derived username: + # openssl x509 -in mycert.pem -inform PEM -subject -nameopt RFC2253 + # server = mongodb://<DERIVED USERNAME>@192.168.0.2:PORT/DATABASE?authSource=$external&ssl=true&authMechanism=MONGODB-X509 + + # Database table configuration for everything except Oracle + radius_db = "radius" + + # If you are using Oracle then use this instead +# radius_db = "(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521))(CONNECT_DATA=(SID=your_sid)))" + + # If you're using postgresql this can also be used instead of the connection info parameters +# radius_db = "dbname=radius host=localhost user=radius password=raddpass" + + # Postgreql doesn't take tls{} options in its module config like mysql does - if you want to + # use SSL connections then use this form of connection info parameter +# radius_db = "host=localhost port=5432 dbname=radius user=radius password=raddpass sslmode=verify-full sslcert=/etc/ssl/client.crt sslkey=/etc/ssl/client.key sslrootcert=/etc/ssl/ca.crt" + + # If you want both stop and start records logged to the + # same SQL table, leave this as is. If you want them in + # different tables, put the start table in acct_table1 + # and stop table in acct_table2 + acct_table1 = "radacct" + acct_table2 = "radacct" + + # Allow for storing data after authentication + postauth_table = "radpostauth" + + # Tables containing 'check' items + authcheck_table = "radcheck" + groupcheck_table = "radgroupcheck" + + # Tables containing 'reply' items + authreply_table = "radreply" + groupreply_table = "radgroupreply" + + # Table to keep group info + usergroup_table = "radusergroup" + + # If set to 'yes' (default) we read the group tables unless Fall-Through = no in the reply table. + # If set to 'no' we do not read the group tables unless Fall-Through = yes in the reply table. +# read_groups = yes + + # If set to 'yes' (default) we read profiles unless Fall-Through = no in the groupreply table. + # If set to 'no' we do not read profiles unless Fall-Through = yes in the groupreply table. +# read_profiles = yes + + # Remove stale session if checkrad does not see a double login + delete_stale_sessions = yes + + # Write SQL queries to a logfile. This is potentially useful for tracing + # issues with authorization queries. See also "logfile" directives in + # mods-config/sql/main/*/queries.conf. You can enable per-section logging + # by enabling "logfile" there, or global logging by enabling "logfile" here. + # + # Per-section logging can be disabled by setting "logfile = ''" +# logfile = ${logdir}/sqllog.sql + + # Set the maximum query duration and connection timeout + # for rlm_sql_mysql. +# query_timeout = 5 + + # As of v3, the "pool" section has replaced the + # following v2 configuration items: + # + # num_sql_socks + # connect_failure_retry_delay + # lifetime + # max_queries + + # + # The connection pool is used to pool outgoing connections. + # + # When the server is not threaded, the connection pool + # limits are ignored, and only one connection is used. + # + # If you want to have multiple SQL modules re-use the same + # connection pool, use "pool = name" instead of a "pool" + # section. e.g. + # + # sql sql1 { + # ... + # pool { + # ... + # } + # } + # + # # sql2 will use the connection pool from sql1 + # sql sql2 { + # ... + # pool = sql1 + # } + # + pool { + # Connections to create during module instantiation. + # If the server cannot create specified number of + # connections during instantiation it will exit. + # Set to 0 to allow the server to start without the + # database being available. + start = ${thread[pool].start_servers} + + # Minimum number of connections to keep open + min = ${thread[pool].min_spare_servers} + + # Maximum number of connections + # + # If these connections are all in use and a new one + # is requested, the request will NOT get a connection. + # + # Setting 'max' to LESS than the number of threads means + # that some threads may starve, and you will see errors + # like 'No connections available and at max connection limit' + # + # Setting 'max' to MORE than the number of threads means + # that there are more connections than necessary. + max = ${thread[pool].max_servers} + + # Spare connections to be left idle + # + # NOTE: Idle connections WILL be closed if "idle_timeout" + # is set. This should be less than or equal to "max" above. + spare = ${thread[pool].max_spare_servers} + + # Number of uses before the connection is closed + # + # 0 means "infinite" + uses = 0 + + # The number of seconds to wait after the server tries + # to open a connection, and fails. During this time, + # no new connections will be opened. + retry_delay = 30 + + # The lifetime (in seconds) of the connection + lifetime = 0 + + # idle timeout (in seconds). A connection which is + # unused for this length of time will be closed. + idle_timeout = 60 + + # NOTE: All configuration settings are enforced. If a + # connection is closed because of "idle_timeout", + # "uses", or "lifetime", then the total number of + # connections MAY fall below "min". When that + # happens, it will open a new connection. It will + # also log a WARNING message. + # + # The solution is to either lower the "min" connections, + # or increase lifetime/idle_timeout. + } + + # Set to 'yes' to read radius clients from the database ('nas' table) + # Clients will ONLY be read on server startup. + # + # A client can be link to a virtual server via the SQL + # module. This link is done via the following process: + # + # If there is no listener in a virtual server, SQL clients + # are added to the global list for that virtual server. + # + # If there is a listener, and the first listener does not + # have a "clients=..." configuration item, SQL clients are + # added to the global list. + # + # If there is a listener, and the first one does have a + # "clients=..." configuration item, SQL clients are added to + # that list. The client { ...} ` configured in that list are + # also added for that listener. + # + # The only issue is if you have multiple listeners in a + # virtual server, each with a different client list, then + # the SQL clients are added only to the first listener. + # +# read_clients = yes + + # Table to keep radius client info + client_table = "nas" + + # + # The group attribute specific to this instance of rlm_sql + # + + # This entry should be used for additional instances (sql foo {}) + # of the SQL module. +# group_attribute = "${.:instance}-SQL-Group" + + # This entry should be used for the default instance (sql {}) + # of the SQL module. + group_attribute = "SQL-Group" + + # Read database-specific queries + $INCLUDE ${modconfdir}/${.:name}/main/${dialect}/queries.conf +} |