diff options
Diffstat (limited to '')
| -rw-r--r-- | raddb/sites-available/dhcp | 584 | ||||
| -rw-r--r-- | raddb/sites-available/dhcp.relay | 44 |
2 files changed, 628 insertions, 0 deletions
diff --git a/raddb/sites-available/dhcp b/raddb/sites-available/dhcp new file mode 100644 index 0000000..4f5ed51 --- /dev/null +++ b/raddb/sites-available/dhcp @@ -0,0 +1,584 @@ +# -*- text -*- +###################################################################### +# +# This is a virtual server that handles DHCP. +# +# See raddb/mods-available/dhcp_sqlippool for the IP Pool configuration. +# +# See raddb/policy.d/dhcp_sqlippool for the "glue" code that allows +# the RADIUS based "sqlippool" module to be used for DHCP. +# +# See raddb/mods-config/sql/ippool/ for the schemas. +# +# See raddb/sites-available/dhcp for instructions on how to configure +# the DHCP server. +# +# $Id$ +# +###################################################################### + +# +# The DHCP functionality goes into a virtual server. +# +server dhcp { + +# Define a DHCP socket. +# +# The default port below is 6700, so you don't break your network. +# If you want it to do real DHCP, change this to 67, and good luck! +# +# You can also bind the DHCP socket to an interface. +# See below, and raddb/radiusd.conf for examples. +# +# This lets you run *one* DHCP server instance and have it listen on +# multiple interfaces, each with a separate policy. +# +# If you have multiple interfaces, it is a good idea to bind the +# listen section to an interface. You will also need one listen +# section per interface. +# +# FreeBSD does *not* support binding sockets to interfaces. Therefore, +# if you have multiple interfaces, broadcasts may go out of the wrong +# one, or even all interfaces. The solution is to use the "setfib" command. +# If you have a network "10.10.0/24" on LAN1, you will need to do: +# +# Pick any IP on the 10.10.0/24 network +# $ setfib 1 route add default 10.10.0.1 +# +# Edit /etc/rc.local, and add a line: +# setfib 1 /path/to/radiusd +# +# The kern must be built with the following options: +# options ROUTETABLES=2 +# or any value larger than 2. +# +# The other only solution is to update FreeRADIUS to use BPF sockets. +# +listen { + # This is a dhcp socket. + type = dhcp + + # IP address to listen on. Will usually be the IP of the + # interface, or 0.0.0.0 + ipaddr = 127.0.0.1 + + # source IP address for unicast packets sent by the + # DHCP server. + # + # The source IP for unicast packets is chosen from the first + # one of the following items which returns a valid IP + # address: + # + # src_ipaddr + # ipaddr + # reply:DHCP-Server-IP-Address + # reply:DHCP-DHCP-Server-Identifier + # + src_ipaddr = 127.0.0.1 + + # The port should be 67 for a production network. Don't set + # it to 67 on a production network unless you really know + # what you're doing. Even if nothing is configured below, the + # server may still NAK legitimate responses from clients. + port = 6700 + + # Interface name we are listening on. See comments above. +# interface = lo0 + + # The DHCP server defaults to allowing broadcast packets. + # Set this to "no" only when the server receives *all* packets + # from a relay agent. i.e. when *no* clients are on the same + # LAN as the DHCP server. + # + # It's set to "no" here for testing. It will usually want to + # be "yes" in production, unless you are only dealing with + # relayed packets. + broadcast = no + + # On Linux if you're running the server as non-root, you + # will need to do: + # + # sudo setcap cap_net_admin=ei /path/to/radiusd + # + # This will allow the server to set ARP table entries + # for newly allocated IPs + + # De-duplicate DHCP packets. If clients don't receive + # a reply within their timeout, most will re-transmit. + # A reply to either packet will satisfy, so de-duplicating + # helps manage load on a busy server + performance { + skip_duplicate_checks = no + } +} + +# Packets received on the socket will be processed through one +# of the following sections, named after the DHCP packet type. +# See dictionary.dhcp for the packet types. + +# Return packets will be sent to, in preference order: +# DHCP-Gateway-IP-Address +# DHCP-Client-IP-Address +# DHCP-Your-IP-Address +# At least one of these attributes should be set at the end of each +# section for a response to be sent. + +# An internal attribute of DHCP-Network-Subnet is set to provide +# a basis for determining the network that a client belongs to. This +# is a hierarchical assignment based on: +# +# - DHCP-Relay-Link-Selection +# - DHCP-Subnet-Selection-Option +# - DHCP-Gateway-IP-Address +# - DHCP-Client-IP-Address +# +# Except for cases where all IP allocation is performed using a mapping from +# the device MAC address to a fixed IP address the DHCP configuration will +# involve the use of one or more pools. +# +# Each pool should be composed of a set of equally valid IP addresses for the +# devices designated as users of the pool. During IP allocation the choice of +# pool is driven by setting the Pool-Name attribute which may either be +# specified directly or chosen (usually with the help of the dhcp_network +# module) based on the initial value of DHCP-Network-Subnet. +# +# DHCP-Network-Subnet indicates the network from which the request is +# originating. In cases where the originating network alone is insufficent to +# define the required IP allocated policy, DHCP-Network-Subnet may be +# overridden to force the selection of a particular pool. +# +# IP addresses belonging to a single pool that is designated for a Layer 2 +# network containing multiple subnets (a "shared-network" or "multinet" +# configuration as defined by some other DHCP servers), will by definition be +# members of distinct subnets that require their own DHCP reply parameters. In +# this case the dhcp_subnet policy can be used to set the correct +# DHCP-Subnet-Mask, DHCP-Router-Address and DHCP-Broadcast-Address options +# based on the allocated IP. + +dhcp DHCP-Discover { + + # The DHCP Server Identifier is set here since is returned in OFFERs + update control { + &DHCP-DHCP-Server-Identifier = 192.0.2.2 + } + + # Call a policy (defined in policy.d/dhcp) to set common reply attributes + dhcp_common + + # Use a "passwd" module to set group memberships in DHCP-Group-Name + # Enable mods-available/dhcp_passwd to use this + #dhcp_group_membership + + # If clients need to be assigned to a particular network based on + # an attribute in the packet rather than the calculated + # DHCP-Network-Subnet described above, then call a policy + # (defined in policy.d/dhcp) to perform the override + #dhcp_override_network + + # Use a "files" module to lookup global and subnet options + # For multiple subnets use this in place of dhcp_common + # Enable mods-available/dhcp_files to use this + # Options are set in mods-config/files/dhcp + #dhcp_network + + # Do a simple mapping of MAC to assigned IP. + # + # See below for the definition of the "mac2ip" + # module. + # + #mac2ip + + # Or, allocate IPs from the DHCP pool in SQL. You may need to + # set the pool name here if you haven't set it elsewhere. + #update control { + # &Pool-Name := "local" + #} + #dhcp_sqlippool + + # If the IP address was not allocated, do something else. + # You could call a Perl, Python, or Java script here. + #if (notfound) { + # ... + #} + + # "Shared-networks" may have multiple IP subnets co-existing in a + # single Layer 2 network. If the pool for the network contains + # addresses from more that one subnet then the setting subnet-specific + # DHCP-Subnet-Mask, DHCP-Router-Address and DHCP-Broadcast-Address + # parameters must be performed after the allocation of the IP address. + # + # Set any subnet-specific parameters using this policy. + # + # Enable mods-available/dhcp_files AND uncomment dhcp_subnet in + # policy.d/dhcp to use this. + # + #dhcp_subnet + + # Use a "files" module to lookup options based on DHCP-Group-Name + # Enable mods-available/dhcp_files to use this + # Options are set in mods-config/files/dhcp + #dhcp_group_options + + # Use a "files" module to lookup host specific options + # Enable mods-available/dhcp_files to use this + # Options are set in mods-config/files/dhcp + #dhcp_hosts + + # As an alternative or complement to configuration files based lookup + # for options data you can instead use an SQL database. Example + # configuration is found in dhcp_policy_sql in policy.d/dhcp which + # will need to be adapted to your requirements. + #dhcp_policy_sql + + # Set the type of packet to send in reply. + # + # The server will look at the DHCP-Message-Type attribute to + # determine which type of packet to send in reply. Common + # values would be DHCP-Offer, DHCP-Ack or DHCP-NAK. See + # dictionary.dhcp for all the possible values. + # + # DHCP-Do-Not-Respond can be used to tell the server to not + # respond. + # + # In the event that DHCP-Message-Type is not set then the + # server will fall back to determining the type of reply + # based on the rcode of this section. + # + #update reply { + # DHCP-Message-Type = DHCP-Offer + #} + # + # If DHCP-Message-Type is not set, returning "ok" or + # "updated" from this section will respond with a DHCP-Offer + # message. + # + # Other rcodes will tell the server to not return any response. + # + #ok +} + +dhcp DHCP-Request { + + # You must set the DHCP Server Identifier here since this is returned + # in ACKs and is used to determine whether a request containing a + # "server-ip" field is intended for this server + update control { + &DHCP-DHCP-Server-Identifier = 192.0.2.2 + } + + # If the request is not for this server then silently discard it + if (&request:DHCP-DHCP-Server-Identifier && \ + &request:DHCP-DHCP-Server-Identifier != &control:DHCP-DHCP-Server-Identifier) { + do_not_respond + } + + # Response packet type. See DHCP-Discover section above. + #update reply { + # &DHCP-Message-Type = DHCP-Ack + #} + + # Call a policy (defined in policy.d/dhcp) to set common reply attributes + dhcp_common + + # Use a "passwd" module to set group memberships in DHCP-Group-Name + # Enable mods-available/dhcp_passwd to use this + #dhcp_group_membership + + # Optionally override the network address based on client attributes + # See Discover section + #dhcp_override_network + + # Use a "files" module to lookup global and subnet options + # For multiple subnets use this in place of dhcp_common + # Enable mods-available/dhcp_files AND uncomment dhcp_subnet in + # policy.d/dhcp to use this + # Options are set in mods-config/files/dhcp + #dhcp_network + + # Do a simple mapping of MAC to assigned IP. + # + # See below for the definition of the "mac2ip" + # module. + # + #mac2ip + + # Or, allocate IPs from the DHCP pool in SQL. You may need to + # set the pool name here if you haven't set it elsewhere. +# update control { +# &Pool-Name := "local" +# } +# dhcp_sqlippool_request + + # If the IP was not allocated, do something else. + # You could call a Perl, Python, or Java script here. + #if (notfound) { + # ... + #} + + # "Shared-networks" may have multiple IP subnets co-existing in a + # single Layer 2 network. If the pool for the network contains + # addresses from more that one subnet then the setting subnet-specific + # DHCP-Subnet-Mask, DHCP-Router-Address and DHCP-Broadcast-Address + # parameters must be performed after the allocation of the IP address. + # + # Set any subnet-specific parameters using this policy. + # + #dhcp_subnet + + # Use a "files" module to lookup options based on DHCP-Group-Name + # Enable mods-available/dhcp_files to use this + # Options are set in mods-config/files/dhcp + #dhcp_group_options + + # Use a "files" module to lookup host specific options + # Enable mods-available/dhcp_files to use this + # Options are set in mods-config/files/dhcp + #dhcp_hosts + + # As an alternative or complement to configuration files based lookup + # for options data you can instead use an SQL database. Example + # configuration is found in dhcp_policy_sql in policy.d/dhcp which + # will need to be adapted to your requirements. + #dhcp_policy_sql + + # If DHCP-Message-Type is not set, returning "ok" or + # "updated" from this section will respond with a DHCP-Ack + # packet. + # + # "handled" will not return a packet, all other rcodes will + # send back a DHCP-NAK. + # + #ok +} + +# +# Other DHCP packet types +# +# There should be a separate section for each DHCP message type. +# By default this configuration will ignore them all. Any packet type +# not defined here will be responded to with a DHCP-NAK. + +dhcp DHCP-Decline { + + # Use a "passwd" module to set group memberships in DHCP-Group-Name + # Enable mods-available/dhcp_passwd to use this + #dhcp_group_membership + + # Optionally override the network address based on client attributes + # See Discover section + #dhcp_override_network + + # Use a "files" module to lookup global and subnet options + # For multiple networks use this in place of dhcp_common + # Enable mods-available/dhcp_files to use this + # Options are set in mods-config/files/dhcp + #dhcp_network + + # Use a policy that set options from data stored in an SQL database + #dhcp_policy_sql + + # If using IPs from a DHCP pool in SQL then you may need to set the + # pool name here if you haven't set it elsewhere and release the IP. +# update control { +# &Pool-Name := "local" +# } +# dhcp_sqlippool_decline + + update reply { + &DHCP-Message-Type = DHCP-Do-Not-Respond + } + reject +} + +# +# A dummy config for Inform packets - this should match the +# options set in the Request section above, except Inform replies +# must not set Your-IP-Address or IP-Address-Lease-Time +# +dhcp DHCP-Inform { + # Call a policy (defined in policy.d/dhcp) to set common reply attributes + dhcp_common + + # Use a "passwd" module to set group memberships in DHCP-Group-Name + # Enable mods-available/dhcp_passwd to use this + #dhcp_group_membership + + # Optionally override the network address based on client attributes + # See Discover section + #dhcp_override_network + + # Use a "files" module to lookup global and network options + # For multiple networks use this in place of dhcp_common + # Enable mods-available/dhcp_files to use this + # Options are set in mods-config/files/dhcp + #dhcp_network + + # Use a policy with calls a "files" module of the same name to lookup + # subnet options + # Enable mods-available/dhcp_files AND uncomment dhcp_subnet in + # policy.d/dhcp to use this + # Options are set in mods-config/files/dhcp + #dhcp_subnet + + # Use a "files" module to lookup options based on DHCP-Group-Name + # Enable mods-available/dhcp_files to use this + # Options are set in mods-config/files/dhcp + #dhcp_group_options + + # Use a "files" module to lookup host specific options + # Enable mods-available/dhcp_files to use this + # Options are set in mods-config/files/dhcp + #dhcp_hosts + + # Use a policy that set options from data stored in an SQL database + #dhcp_policy_sql + + ok +} + +# +# For Windows 7 boxes +# +#dhcp DHCP-Inform { +# update reply { +# Packet-Dst-Port = 67 +# DHCP-Message-Type = DHCP-ACK +# DHCP-DHCP-Server-Identifier = "%{Packet-Dst-IP-Address}" +# DHCP-Site-specific-28 = 0x0a00 +# } +# ok +#} + +dhcp DHCP-Release { + + # Use a "passwd" module to set group memberships in DHCP-Group-Name + # Enable mods-available/dhcp_passwd to use this + #dhcp_group_membership + + # Optionally override the network address based on client attributes + # See Discover section + #dhcp_override_network + + # Use a "files" module to lookup global and subnet options + # For multiple subnets use this in place of dhcp_common + # Enable mods-available/dhcp_files to use this + # Options are set in mods-config/files/dhcp + #dhcp_network + + # If using IPs from a DHCP pool in SQL then you may need to set the + # pool name here if you haven't set it elsewhere and release the IP. +# update control { +# &Pool-Name := "local" +# } +# dhcp_sqlippool_release + + update reply { + &DHCP-Message-Type = DHCP-Do-Not-Respond + } + reject +} + + +dhcp DHCP-Lease-Query { + # The thing being queried for is implicit + # in the packets. + + # has MAC, asking for IP, etc. + if (&DHCP-Client-Hardware-Address) { + # look up MAC in database + } + + # has IP, asking for MAC, etc. + elsif (&DHCP-Your-IP-Address) { + # look up IP in database + } + + # has host name, asking for IP, MAC, etc. + elsif (&DHCP-Client-Identifier) { + # look up identifier in database + } + else { + update reply { + &DHCP-Message-Type = DHCP-Lease-Unknown + } + + ok + + # stop processing + return + } + + # + # We presume that the database lookup returns "notfound" + # if it can't find anything. + # + if (notfound) { + update reply { + &DHCP-Message-Type = DHCP-Lease-Unknown + } + ok + return + } + + # + # Add more logic here. Is the lease inactive? + # If so, respond with DHCP-Lease-Unassigned. + # + # Otherwise, respond with DHCP-Lease-Active + # + + # + # Also be sure to return ALL information about + # the lease. + # + + # + # The reply types are: + # + # DHCP-Lease-Unknown + # DHCP-Lease-Active + # DHCP-Lease-Unassigned + # + update reply { + &DHCP-Message-Type = DHCP-Lease-Unassigned + } + +} + +} + +###################################################################### +# +# This next section is a sample configuration for the "passwd" +# module, that reads flat-text files. It should go into +# radiusd.conf, in the "modules" section. +# +# The file is in the format <mac>,<ip> +# +# 00:01:02:03:04:05,192.0.2.100 +# 01:01:02:03:04:05,192.0.2.101 +# 02:01:02:03:04:05,192.0.2.102 +# +# This lets you perform simple static IP assignment. +# +# There is a preconfigured "mac2ip" module setup in +# mods-available/mac2ip. To use it do: +# +# # cd raddb/ +# # ln -s ../mods-available/mac2ip mods-enabled/mac2ip +# # mkdir mods-config/passwd +# +# Then create the file mods-config/passwd/mac2ip with the above +# format. +# +###################################################################### + + +# This is an example only - see mods-available/mac2ip instead; do +# not uncomment these lines here. +# +#passwd mac2ip { +# filename = ${confdir}/mac2ip +# format = "*DHCP-Client-Hardware-Address:=DHCP-Your-IP-Address" +# delimiter = "," +#} diff --git a/raddb/sites-available/dhcp.relay b/raddb/sites-available/dhcp.relay new file mode 100644 index 0000000..76d1e10 --- /dev/null +++ b/raddb/sites-available/dhcp.relay @@ -0,0 +1,44 @@ +# -*- text -*- +###################################################################### +# +# This is a virtual server that handles DHCP relaying +# +# Only one server can listen on a socket, so you cannot +# do DHCP relaying && run a DHCP server at the same time. +# +###################################################################### + +server dhcp.eth1 { + listen { + ipaddr = * + port = 67 + type = dhcp + interface = eth1 + } + + # Packets received on the socket will be processed through one + # of the following sections, named after the DHCP packet type. + # See dictionary.dhcp for the packet types. + dhcp DHCP-Discover { + update config { + # IP Address of the DHCP server + &DHCP-Relay-To-IP-Address := 192.0.2.2 + } + update request { + # IP Address of the DHCP relay (ourselves) + &DHCP-Gateway-IP-Address := 192.0.2.1 + } + ok + } + + dhcp DHCP-Request { + update config { + # IP Address of the DHCP server + &DHCP-Relay-To-IP-Address := 192.0.2.2 + } + update request { + &DHCP-Gateway-IP-Address := 192.0.2.2 + } + ok + } +} |