summaryrefslogtreecommitdiffstats
path: root/src/modules/rlm_couchbase
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--src/modules/rlm_couchbase/.gitignore1
-rw-r--r--src/modules/rlm_couchbase/README.md189
-rw-r--r--src/modules/rlm_couchbase/all.mk.in13
-rw-r--r--src/modules/rlm_couchbase/config.h.in25
-rwxr-xr-xsrc/modules/rlm_couchbase/configure5220
-rw-r--r--src/modules/rlm_couchbase/configure.ac242
-rw-r--r--src/modules/rlm_couchbase/couchbase.c412
-rw-r--r--src/modules/rlm_couchbase/couchbase.h94
-rw-r--r--src/modules/rlm_couchbase/jsonc_missing.c82
-rw-r--r--src/modules/rlm_couchbase/jsonc_missing.h89
-rw-r--r--src/modules/rlm_couchbase/mod.c767
-rw-r--r--src/modules/rlm_couchbase/mod.h101
-rw-r--r--src/modules/rlm_couchbase/rlm_couchbase.c874
13 files changed, 8109 insertions, 0 deletions
diff --git a/src/modules/rlm_couchbase/.gitignore b/src/modules/rlm_couchbase/.gitignore
new file mode 100644
index 0000000..01a5daa
--- /dev/null
+++ b/src/modules/rlm_couchbase/.gitignore
@@ -0,0 +1 @@
+all.mk
diff --git a/src/modules/rlm_couchbase/README.md b/src/modules/rlm_couchbase/README.md
new file mode 100644
index 0000000..1361f64
--- /dev/null
+++ b/src/modules/rlm_couchbase/README.md
@@ -0,0 +1,189 @@
+rlm_couchbase
+=============
+
+General
+-------
+
+This module supports accounting, authorization, dynamic clients and simultaneous use checking. Accounting data is written directly to Couchbase as JSON documents and user authorization information is read from JSON documents stored within Couchbase. You should list the ```couchbase``` module in both the ```accounting``` and ```authorization``` sections of your site configuration if you are planning to use it for both purposes. You should also have ```pap``` enabled for authenticating users based on cleartext or hashed password attributes. To enable simultanous use checking you will need to list the ```couchbase``` module in the ```session``` and ```accounting``` sections of your site configuration.
+
+It was tested to handle thousands of RADIUS requests per second from several thousand Aerohive access points using a FreeRADIUS installation with this module for accounting and authorization.
+
+Accounting
+----------
+
+You can use any RADIUS attribute available in the accounting request to build the key for storing the accounting documents. The default configuration will try to use 'Acct-Unique-Session-Id' and fallback to 'Acct-Session-Id' if 'Acct-Unique-Session-Id' is not present. You will need to have the ```acct_unique``` policy in the ```preacct``` section of your configuration to generate the unique id attribute. Different status types (start/stop/update) are merged into a single document to facilitate querying and reporting via views. When everything is configured correctly you will see accounting requests recorded as JSON documents in your Couchbase cluster. You have full control over what attributes are recorded and how those attributes are mapped to JSON element names via the module configuration.
+
+This example is from an Aerohive wireless access point.
+
+```
+{
+ "docType": "radacct",
+ "startTimestamp": "Jul 15 2013 13:22:07 CDT",
+ "stopTimestamp": "null",
+ "sessionId": "51D241D3-0000047A",
+ "lastStatus": 3,
+ "authentic": 1,
+ "userName": "mruser@blargs.com",
+ "nasIpAddress": "172.28.4.150",
+ "nasIdentifier": "air4.corp.blargs.com",
+ "nasPort": 0,
+ "calledStationId": "40-18-b1-01-3c-54",
+ "framedIpAddress": "172.27.2.87",
+ "callingStationId": "8C-2D-AA-72-36-BA",
+ "nasPortType": 19,
+ "connectInfo": "11ng",
+ "sessionTime": 5821,
+ "inputPackets": 5591,
+ "inputOctets": 681742,
+ "inputGigawords": 0,
+ "outputOctets": 536306,
+ "outputGigawords": 0,
+ "outputPackets": 1087,
+ "lastUpdated": "Jul 15 2013 14:59:08 CDT",
+ "uniqueId": "029d975fc48ecb41444da52a65e62a55",
+ "calledStationSSID": "BLARGS-WIFI",
+ "strippedUserName": "mruser",
+ "strippedUserDomain": "blargs.com"
+}
+```
+
+To generate the 'calledStationSSID' fields you will need to use the ```rewrite_called_station_id``` policy in the ```preacct``` section of your config. Similarly to get the 'Stripped-User-Name' and 'Stripped-User-Domain' attributes you can create a file in ```raddb/policy.d/``` with the following content:
+
+```
+## simple nt domain regex
+simple_nt_regexp = "^([^\\]*)\\(.*)$"
+
+## simple nai regex
+simple_nai_regexp = "^([^@]*)@(.*)$"
+
+## split user@domain and domain\user formats
+strip_user_domain {
+ if(User-Name && (User-Name =~ /${policy.simple_nt_regexp}/)){
+ update request {
+ &Stripped-User-Domain = "%{1}"
+ &Stripped-User-Name = "%{2}"
+ }
+ }
+ elsif(User-Name && (User-Name =~ /${policy.simple_nai_regexp}/)){
+ update request {
+ &Stripped-User-Name = "%{1}"
+ &Stripped-User-Domain = "%{2}"
+ }
+ }
+ else {
+ noop
+ }
+}
+```
+
+You can then reference this policy in both the ```preacct``` and ```authorization``` sections of your configuration before calling this module.
+
+Authorization
+-------------
+
+The authorization functionality relies on the user documents being stored with deterministic keys based on information available in the authorization request. The format of those keys may be specified in unlang like the example below:
+
+```
+user_key = "raduser_%{md5:%{tolower:%{%{Stripped-User-Name}:-%{User-Name}}}}"
+```
+
+This will create an md5 hash of the lowercase 'Stripped-User-Name' attribute or the 'User-Name' attribute if 'Stripped-User-Name' doesn't exist. The module will then attempt to fetch the resulting key from the configured Couchbase bucket.
+
+The document structure is straight forward and flexible:
+
+```json
+{
+ "docType": "raduser",
+ "userName": "test",
+ "config": {
+ "SHA-Password": {
+ "value": "a94a8fe5ccb19ba61c4c0873d391e987982fbbd3",
+ "op": ":="
+ }
+ },
+ "reply": {
+ "Reply-Message": {
+ "value": "Hidey Ho!",
+ "op": "="
+ }
+ }
+}
+```
+
+You may specify any valid combination of attributes and operators in the JSON document ```config``` and ```reply``` sections. All other elements present in the user document will not be parsed and are ignored by the module.
+
+Clients
+-------
+
+The client functionality depends on a combination of client documents and a simple view that returns those document keys. Client documents are only loaded ONCE on server startup so there should be no performance penalty using a view for this purpose.
+
+To enable the client loading functionality you will need to set the ```read_clients``` config option to 'yes' and specify a fully qualified view path in the ```client_view``` option.
+
+Example client document:
+
+```json
+{
+ "docType": "radclient",
+ "clientIdentifier": "13.0.0.0/8",
+ "clientSecret": "testing123"
+}
+```
+
+The element names and the client attributes to which they map are completely configurable. Elements present in the document that are not enumerated in the module configuration will be ignored. In addition to this document you will also need a view that returns the keys of all client documents you wish to load.
+
+Example client view:
+
+```js
+function (doc, meta) {
+ if (doc.docType && doc.docType == "radclient") {
+ emit(meta.id, null);
+ }
+}
+```
+
+This is the simplest possible view that would return all documents in the specified bucket having a ```docType``` element with ```radclient``` value. The module only reads the ```key``` (first emited field) and ```id``` elements in the returned view thus no additional output is needed and any additional output would be ignored. The ```key``` emitted here will be used as the client name inside the module.
+
+To have the module load only a subset of the client documents contained within the bucket you could add additional elements to the client documents and then filter based on those elements within your view.
+
+Simultaneous Use
+----------------
+
+The simultaneous use function relies on data stored in the accounting documents. When a user attempts to authenticate a view request is made to return all accounting type documents for the current user that do not contain a populated ```stopTimestamp``` value.
+
+Example check view:
+
+```js
+function (doc, meta) {
+ if (doc.docType && doc.docType == "radacct" && doc.userName && !doc.stopTimestamp) {
+ if (doc.strippedUserName) {
+ emit(doc.strippedUserName.toLowerCase(), null);
+ } else {
+ emit(doc.userName.toLowerCase(), null);
+ }
+ }
+}
+```
+
+The key (first emitted field) will need to match *EXACTLY* what you set for ```simul_vkey``` in the module configuration. The default xlat value will attempt to return the lower case 'Stripped-User-Name' attribute or 'User-Name' if the stripped version is not available.
+
+When the total number of keys (sessions) returned is greater than or equal to the ```Simultaneous-Use``` config section value of the current user, the user will be denied access. When verification is also enabled, each returned key will be fetched and the appropriate information will be passed on to the ```checkrad``` utillity to verify the session status. If ```checkrad``` determines the session is no longer valid (stale) the session will be updated and closed in Couchbase (if configured) and that session will not be counted against the users login limit. Further information is available in the module configuration.
+
+To Use
+------
+Until this module is added to the stable list you will need to explicitly add it to ```src/modules/stable``` before building the server.
+
+```
+echo rlm_couchbase >> src/modules/stable
+```
+
+You will also need the following libraries installed where they may be found by the server configuration script.
+
+* [libcouchbase](https://github.com/couchbase/libcouchbase) >= 2.0.0 with a valid libio module
+* [json-c](https://github.com/json-c/json-c) >= 0.9 (0.10+ HIGHLY encouraged)
+
+Once the above steps are complete, simply configure and install as usual.
+
+Module Configuration
+--------------------
+
+Please see [/raddb/mods-available/couchbase](/raddb/mods-available/couchbase) for all available configuration options.
diff --git a/src/modules/rlm_couchbase/all.mk.in b/src/modules/rlm_couchbase/all.mk.in
new file mode 100644
index 0000000..1b52bcf
--- /dev/null
+++ b/src/modules/rlm_couchbase/all.mk.in
@@ -0,0 +1,13 @@
+TARGETNAME := @targetname@
+
+ifneq "$(TARGETNAME)" ""
+TARGET := $(TARGETNAME).a
+endif
+
+SOURCES := $(TARGETNAME).c mod.c jsonc_missing.c couchbase.c
+
+SRC_CFLAGS := @mod_cflags@
+TGT_LDLIBS := @mod_ldflags@
+
+# TODO: create man page
+#MAN := rlm_couchbase.8
diff --git a/src/modules/rlm_couchbase/config.h.in b/src/modules/rlm_couchbase/config.h.in
new file mode 100644
index 0000000..63a968f
--- /dev/null
+++ b/src/modules/rlm_couchbase/config.h.in
@@ -0,0 +1,25 @@
+/* config.h.in. Generated from configure.ac by autoheader. */
+
+/* json.h is at json-c/json.h relative to include dir */
+#undef HAVE_JSONMC_JSON_H
+
+/* Define to 1 if you have the `json_c_version' function. */
+#undef HAVE_JSON_C_VERSION
+
+/* json.h is at json/json.h relative to include dir */
+#undef HAVE_JSON_JSON_H
+
+/* Define to 1 if you have the `json_object_get_string_len' function. */
+#undef HAVE_JSON_OBJECT_GET_STRING_LEN
+
+/* Define to 1 if you have the `json_object_new_int64' function. */
+#undef HAVE_JSON_OBJECT_NEW_INT64
+
+/* Define to 1 if you have the `json_object_object_get_ex' function. */
+#undef HAVE_JSON_OBJECT_OBJECT_GET_EX
+
+/* Define to 1 if you have the `json_tokener_error_desc' function. */
+#undef HAVE_JSON_TOKENER_ERROR_DESC
+
+/* Define to 1 if you have the `json_tokener_get_error' function. */
+#undef HAVE_JSON_TOKENER_GET_ERROR
diff --git a/src/modules/rlm_couchbase/configure b/src/modules/rlm_couchbase/configure
new file mode 100755
index 0000000..805f558
--- /dev/null
+++ b/src/modules/rlm_couchbase/configure
@@ -0,0 +1,5220 @@
+#! /bin/sh
+# From configure.ac Revision.
+# Guess values for system-dependent variables and create Makefiles.
+# Generated by GNU Autoconf 2.69.
+#
+#
+# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc.
+#
+#
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+ emulate sh
+ NULLCMD=:
+ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+ setopt NO_GLOB_SUBST
+else
+ case `(set -o) 2>/dev/null` in #(
+ *posix*) :
+ set -o posix ;; #(
+ *) :
+ ;;
+esac
+fi
+
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+ as_echo='print -r --'
+ as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+ as_echo='printf %s\n'
+ as_echo_n='printf %s'
+else
+ if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+ as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+ as_echo_n='/usr/ucb/echo -n'
+ else
+ as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+ as_echo_n_body='eval
+ arg=$1;
+ case $arg in #(
+ *"$as_nl"*)
+ expr "X$arg" : "X\\(.*\\)$as_nl";
+ arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+ esac;
+ expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+ '
+ export as_echo_n_body
+ as_echo_n='sh -c $as_echo_n_body as_echo'
+ fi
+ export as_echo_body
+ as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ PATH_SEPARATOR=:
+ (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+ (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+ PATH_SEPARATOR=';'
+ }
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order. Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" "" $as_nl"
+
+# Find who we are. Look in the path if we contain no directory separator.
+as_myself=
+case $0 in #((
+ *[\\/]* ) as_myself=$0 ;;
+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+ as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+ $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+ exit 1
+fi
+
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there. '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+# Use a proper internal environment variable to ensure we don't fall
+ # into an infinite loop, continuously re-executing ourselves.
+ if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then
+ _as_can_reexec=no; export _as_can_reexec;
+ # We cannot yet assume a decent shell, so we have to provide a
+# neutralization value for shells without unset; and this also
+# works around shells that cannot unset nonexistent variables.
+# Preserve -v and -x to the replacement shell.
+BASH_ENV=/dev/null
+ENV=/dev/null
+(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+case $- in # ((((
+ *v*x* | *x*v* ) as_opts=-vx ;;
+ *v* ) as_opts=-v ;;
+ *x* ) as_opts=-x ;;
+ * ) as_opts= ;;
+esac
+exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
+# Admittedly, this is quite paranoid, since all the known shells bail
+# out after a failed `exec'.
+$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
+as_fn_exit 255
+ fi
+ # We don't want this to propagate to other subprocesses.
+ { _as_can_reexec=; unset _as_can_reexec;}
+if test "x$CONFIG_SHELL" = x; then
+ as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
+ emulate sh
+ NULLCMD=:
+ # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '\${1+\"\$@\"}'='\"\$@\"'
+ setopt NO_GLOB_SUBST
+else
+ case \`(set -o) 2>/dev/null\` in #(
+ *posix*) :
+ set -o posix ;; #(
+ *) :
+ ;;
+esac
+fi
+"
+ as_required="as_fn_return () { (exit \$1); }
+as_fn_success () { as_fn_return 0; }
+as_fn_failure () { as_fn_return 1; }
+as_fn_ret_success () { return 0; }
+as_fn_ret_failure () { return 1; }
+
+exitcode=0
+as_fn_success || { exitcode=1; echo as_fn_success failed.; }
+as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
+as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
+as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
+if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :
+
+else
+ exitcode=1; echo positional parameters were not saved.
+fi
+test x\$exitcode = x0 || exit 1
+test -x / || exit 1"
+ as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
+ as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
+ eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
+ test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1"
+ if (eval "$as_required") 2>/dev/null; then :
+ as_have_required=yes
+else
+ as_have_required=no
+fi
+ if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then :
+
+else
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+as_found=false
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ as_found=:
+ case $as_dir in #(
+ /*)
+ for as_base in sh bash ksh sh5; do
+ # Try only shells that exist, to save several forks.
+ as_shell=$as_dir/$as_base
+ if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
+ { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then :
+ CONFIG_SHELL=$as_shell as_have_required=yes
+ if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then :
+ break 2
+fi
+fi
+ done;;
+ esac
+ as_found=false
+done
+$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
+ { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then :
+ CONFIG_SHELL=$SHELL as_have_required=yes
+fi; }
+IFS=$as_save_IFS
+
+
+ if test "x$CONFIG_SHELL" != x; then :
+ export CONFIG_SHELL
+ # We cannot yet assume a decent shell, so we have to provide a
+# neutralization value for shells without unset; and this also
+# works around shells that cannot unset nonexistent variables.
+# Preserve -v and -x to the replacement shell.
+BASH_ENV=/dev/null
+ENV=/dev/null
+(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+case $- in # ((((
+ *v*x* | *x*v* ) as_opts=-vx ;;
+ *v* ) as_opts=-v ;;
+ *x* ) as_opts=-x ;;
+ * ) as_opts= ;;
+esac
+exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
+# Admittedly, this is quite paranoid, since all the known shells bail
+# out after a failed `exec'.
+$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
+exit 255
+fi
+
+ if test x$as_have_required = xno; then :
+ $as_echo "$0: This script requires a shell more modern than all"
+ $as_echo "$0: the shells that I found on your system."
+ if test x${ZSH_VERSION+set} = xset ; then
+ $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should"
+ $as_echo "$0: be upgraded to zsh 4.3.4 or later."
+ else
+ $as_echo "$0: Please tell bug-autoconf@gnu.org about your system,
+$0: including any error possibly output before this
+$0: message. Then install a modern shell, or manually run
+$0: the script under such a shell if you do have one."
+ fi
+ exit 1
+fi
+fi
+fi
+SHELL=${CONFIG_SHELL-/bin/sh}
+export SHELL
+# Unset more variables known to interfere with behavior of common tools.
+CLICOLOR_FORCE= GREP_OPTIONS=
+unset CLICOLOR_FORCE GREP_OPTIONS
+
+## --------------------- ##
+## M4sh Shell Functions. ##
+## --------------------- ##
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+ { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+ return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+ set +e
+ as_fn_set_status $1
+ exit $1
+} # as_fn_exit
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+ case $as_dir in #(
+ -*) as_dir=./$as_dir;;
+ esac
+ test -d "$as_dir" || eval $as_mkdir_p || {
+ as_dirs=
+ while :; do
+ case $as_dir in #(
+ *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+ *) as_qdir=$as_dir;;
+ esac
+ as_dirs="'$as_qdir' $as_dirs"
+ as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_dir" : 'X\(//\)[^/]' \| \
+ X"$as_dir" : 'X\(//\)$' \| \
+ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ test -d "$as_dir" && break
+ done
+ test -z "$as_dirs" || eval "mkdir $as_dirs"
+ } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+
+# as_fn_executable_p FILE
+# -----------------------
+# Test if FILE is an executable regular file.
+as_fn_executable_p ()
+{
+ test -f "$1" && test -x "$1"
+} # as_fn_executable_p
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+ eval 'as_fn_append ()
+ {
+ eval $1+=\$2
+ }'
+else
+ as_fn_append ()
+ {
+ eval $1=\$$1\$2
+ }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+ eval 'as_fn_arith ()
+ {
+ as_val=$(( $* ))
+ }'
+else
+ as_fn_arith ()
+ {
+ as_val=`expr "$@" || test $? -eq 1`
+ }
+fi # as_fn_arith
+
+
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with STATUS, using 1 if that was 0.
+as_fn_error ()
+{
+ as_status=$1; test $as_status -eq 0 && as_status=1
+ if test "$4"; then
+ as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
+ fi
+ $as_echo "$as_me: error: $2" >&2
+ as_fn_exit $as_status
+} # as_fn_error
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+ as_basename=basename
+else
+ as_basename=false
+fi
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+ as_dirname=dirname
+else
+ as_dirname=false
+fi
+
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+ X"$0" : 'X\(//\)$' \| \
+ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+ sed '/^.*\/\([^/][^/]*\)\/*$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+
+ as_lineno_1=$LINENO as_lineno_1a=$LINENO
+ as_lineno_2=$LINENO as_lineno_2a=$LINENO
+ eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
+ test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
+ # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-)
+ sed -n '
+ p
+ /[$]LINENO/=
+ ' <$as_myself |
+ sed '
+ s/[$]LINENO.*/&-/
+ t lineno
+ b
+ :lineno
+ N
+ :loop
+ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
+ t loop
+ s/-\n.*//
+ ' >$as_me.lineno &&
+ chmod +x "$as_me.lineno" ||
+ { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
+
+ # If we had to re-execute with $CONFIG_SHELL, we're ensured to have
+ # already done that, so ensure we don't try to do so again and fall
+ # in an infinite loop. This has already happened in practice.
+ _as_can_reexec=no; export _as_can_reexec
+ # Don't try to exec as it changes $[0], causing all sort of problems
+ # (the dirname of $[0] is not the place where we might find the
+ # original and so on. Autoconf is especially sensitive to this).
+ . "./$as_me.lineno"
+ # Exit status is that of the last command.
+ exit
+}
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+ case `echo 'xy\c'` in
+ *c*) ECHO_T=' ';; # ECHO_T is single tab character.
+ xy) ECHO_C='\c';;
+ *) echo `echo ksh88 bug on AIX 6.1` > /dev/null
+ ECHO_T=' ';;
+ esac;;
+*)
+ ECHO_N='-n';;
+esac
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+ rm -f conf$$.dir/conf$$.file
+else
+ rm -f conf$$.dir
+ mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+ if ln -s conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s='ln -s'
+ # ... but there are two gotchas:
+ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+ # In both cases, we have to default to `cp -pR'.
+ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+ as_ln_s='cp -pR'
+ elif ln conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s=ln
+ else
+ as_ln_s='cp -pR'
+ fi
+else
+ as_ln_s='cp -pR'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+if mkdir -p . 2>/dev/null; then
+ as_mkdir_p='mkdir -p "$as_dir"'
+else
+ test -d ./-p && rmdir ./-p
+ as_mkdir_p=false
+fi
+
+as_test_x='test -x'
+as_executable_p=as_fn_executable_p
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+test -n "$DJDIR" || exec 7<&0 </dev/null
+exec 6>&1
+
+# Name of the host.
+# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status,
+# so uname gets run too.
+ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
+
+#
+# Initializations.
+#
+ac_default_prefix=/usr/local
+ac_clean_files=
+ac_config_libobj_dir=.
+LIBOBJS=
+cross_compiling=no
+subdirs=
+MFLAGS=
+MAKEFLAGS=
+
+# Identity of this package.
+PACKAGE_NAME=
+PACKAGE_TARNAME=
+PACKAGE_VERSION=
+PACKAGE_STRING=
+PACKAGE_BUGREPORT=
+PACKAGE_URL=
+
+ac_unique_file="rlm_couchbase.c"
+ac_subst_vars='LTLIBOBJS
+LIBOBJS
+targetname
+mod_ldflags
+mod_cflags
+CPP
+OBJEXT
+EXEEXT
+ac_ct_CC
+CPPFLAGS
+LDFLAGS
+CFLAGS
+CC
+target_alias
+host_alias
+build_alias
+LIBS
+ECHO_T
+ECHO_N
+ECHO_C
+DEFS
+mandir
+localedir
+libdir
+psdir
+pdfdir
+dvidir
+htmldir
+infodir
+docdir
+oldincludedir
+includedir
+runstatedir
+localstatedir
+sharedstatedir
+sysconfdir
+datadir
+datarootdir
+libexecdir
+sbindir
+bindir
+program_transform_name
+prefix
+exec_prefix
+PACKAGE_URL
+PACKAGE_BUGREPORT
+PACKAGE_STRING
+PACKAGE_VERSION
+PACKAGE_TARNAME
+PACKAGE_NAME
+PATH_SEPARATOR
+SHELL'
+ac_subst_files=''
+ac_user_opts='
+enable_option_checking
+with_rlm_couchbase
+with_jsonc_include_dir
+with_jsonc_lib_dir
+with_jsonc_dir
+with_libcouchbase_include_dir
+with_libcouchbase_lib_dir
+with_libcouchbase_dir
+'
+ ac_precious_vars='build_alias
+host_alias
+target_alias
+CC
+CFLAGS
+LDFLAGS
+LIBS
+CPPFLAGS
+CPP'
+
+
+# Initialize some variables set by options.
+ac_init_help=
+ac_init_version=false
+ac_unrecognized_opts=
+ac_unrecognized_sep=
+# The variables have the same names as the options, with
+# dashes changed to underlines.
+cache_file=/dev/null
+exec_prefix=NONE
+no_create=
+no_recursion=
+prefix=NONE
+program_prefix=NONE
+program_suffix=NONE
+program_transform_name=s,x,x,
+silent=
+site=
+srcdir=
+verbose=
+x_includes=NONE
+x_libraries=NONE
+
+# Installation directory options.
+# These are left unexpanded so users can "make install exec_prefix=/foo"
+# and all the variables that are supposed to be based on exec_prefix
+# by default will actually change.
+# Use braces instead of parens because sh, perl, etc. also accept them.
+# (The list follows the same order as the GNU Coding Standards.)
+bindir='${exec_prefix}/bin'
+sbindir='${exec_prefix}/sbin'
+libexecdir='${exec_prefix}/libexec'
+datarootdir='${prefix}/share'
+datadir='${datarootdir}'
+sysconfdir='${prefix}/etc'
+sharedstatedir='${prefix}/com'
+localstatedir='${prefix}/var'
+runstatedir='${localstatedir}/run'
+includedir='${prefix}/include'
+oldincludedir='/usr/include'
+docdir='${datarootdir}/doc/${PACKAGE}'
+infodir='${datarootdir}/info'
+htmldir='${docdir}'
+dvidir='${docdir}'
+pdfdir='${docdir}'
+psdir='${docdir}'
+libdir='${exec_prefix}/lib'
+localedir='${datarootdir}/locale'
+mandir='${datarootdir}/man'
+
+ac_prev=
+ac_dashdash=
+for ac_option
+do
+ # If the previous option needs an argument, assign it.
+ if test -n "$ac_prev"; then
+ eval $ac_prev=\$ac_option
+ ac_prev=
+ continue
+ fi
+
+ case $ac_option in
+ *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
+ *=) ac_optarg= ;;
+ *) ac_optarg=yes ;;
+ esac
+
+ # Accept the important Cygnus configure options, so we can diagnose typos.
+
+ case $ac_dashdash$ac_option in
+ --)
+ ac_dashdash=yes ;;
+
+ -bindir | --bindir | --bindi | --bind | --bin | --bi)
+ ac_prev=bindir ;;
+ -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+ bindir=$ac_optarg ;;
+
+ -build | --build | --buil | --bui | --bu)
+ ac_prev=build_alias ;;
+ -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+ build_alias=$ac_optarg ;;
+
+ -cache-file | --cache-file | --cache-fil | --cache-fi \
+ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+ ac_prev=cache_file ;;
+ -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+ cache_file=$ac_optarg ;;
+
+ --config-cache | -C)
+ cache_file=config.cache ;;
+
+ -datadir | --datadir | --datadi | --datad)
+ ac_prev=datadir ;;
+ -datadir=* | --datadir=* | --datadi=* | --datad=*)
+ datadir=$ac_optarg ;;
+
+ -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
+ | --dataroo | --dataro | --datar)
+ ac_prev=datarootdir ;;
+ -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
+ | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
+ datarootdir=$ac_optarg ;;
+
+ -disable-* | --disable-*)
+ ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+ as_fn_error $? "invalid feature name: $ac_useropt"
+ ac_useropt_orig=$ac_useropt
+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+ case $ac_user_opts in
+ *"
+"enable_$ac_useropt"
+"*) ;;
+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"
+ ac_unrecognized_sep=', ';;
+ esac
+ eval enable_$ac_useropt=no ;;
+
+ -docdir | --docdir | --docdi | --doc | --do)
+ ac_prev=docdir ;;
+ -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
+ docdir=$ac_optarg ;;
+
+ -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
+ ac_prev=dvidir ;;
+ -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
+ dvidir=$ac_optarg ;;
+
+ -enable-* | --enable-*)
+ ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+ as_fn_error $? "invalid feature name: $ac_useropt"
+ ac_useropt_orig=$ac_useropt
+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+ case $ac_user_opts in
+ *"
+"enable_$ac_useropt"
+"*) ;;
+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"
+ ac_unrecognized_sep=', ';;
+ esac
+ eval enable_$ac_useropt=\$ac_optarg ;;
+
+ -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+ | --exec | --exe | --ex)
+ ac_prev=exec_prefix ;;
+ -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+ | --exec=* | --exe=* | --ex=*)
+ exec_prefix=$ac_optarg ;;
+
+ -gas | --gas | --ga | --g)
+ # Obsolete; use --with-gas.
+ with_gas=yes ;;
+
+ -help | --help | --hel | --he | -h)
+ ac_init_help=long ;;
+ -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
+ ac_init_help=recursive ;;
+ -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
+ ac_init_help=short ;;
+
+ -host | --host | --hos | --ho)
+ ac_prev=host_alias ;;
+ -host=* | --host=* | --hos=* | --ho=*)
+ host_alias=$ac_optarg ;;
+
+ -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
+ ac_prev=htmldir ;;
+ -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
+ | --ht=*)
+ htmldir=$ac_optarg ;;
+
+ -includedir | --includedir | --includedi | --included | --include \
+ | --includ | --inclu | --incl | --inc)
+ ac_prev=includedir ;;
+ -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+ | --includ=* | --inclu=* | --incl=* | --inc=*)
+ includedir=$ac_optarg ;;
+
+ -infodir | --infodir | --infodi | --infod | --info | --inf)
+ ac_prev=infodir ;;
+ -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+ infodir=$ac_optarg ;;
+
+ -libdir | --libdir | --libdi | --libd)
+ ac_prev=libdir ;;
+ -libdir=* | --libdir=* | --libdi=* | --libd=*)
+ libdir=$ac_optarg ;;
+
+ -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+ | --libexe | --libex | --libe)
+ ac_prev=libexecdir ;;
+ -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+ | --libexe=* | --libex=* | --libe=*)
+ libexecdir=$ac_optarg ;;
+
+ -localedir | --localedir | --localedi | --localed | --locale)
+ ac_prev=localedir ;;
+ -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
+ localedir=$ac_optarg ;;
+
+ -localstatedir | --localstatedir | --localstatedi | --localstated \
+ | --localstate | --localstat | --localsta | --localst | --locals)
+ ac_prev=localstatedir ;;
+ -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+ | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
+ localstatedir=$ac_optarg ;;
+
+ -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+ ac_prev=mandir ;;
+ -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+ mandir=$ac_optarg ;;
+
+ -nfp | --nfp | --nf)
+ # Obsolete; use --without-fp.
+ with_fp=no ;;
+
+ -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+ | --no-cr | --no-c | -n)
+ no_create=yes ;;
+
+ -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
+ no_recursion=yes ;;
+
+ -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
+ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
+ | --oldin | --oldi | --old | --ol | --o)
+ ac_prev=oldincludedir ;;
+ -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+ oldincludedir=$ac_optarg ;;
+
+ -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+ ac_prev=prefix ;;
+ -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+ prefix=$ac_optarg ;;
+
+ -program-prefix | --program-prefix | --program-prefi | --program-pref \
+ | --program-pre | --program-pr | --program-p)
+ ac_prev=program_prefix ;;
+ -program-prefix=* | --program-prefix=* | --program-prefi=* \
+ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+ program_prefix=$ac_optarg ;;
+
+ -program-suffix | --program-suffix | --program-suffi | --program-suff \
+ | --program-suf | --program-su | --program-s)
+ ac_prev=program_suffix ;;
+ -program-suffix=* | --program-suffix=* | --program-suffi=* \
+ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+ program_suffix=$ac_optarg ;;
+
+ -program-transform-name | --program-transform-name \
+ | --program-transform-nam | --program-transform-na \
+ | --program-transform-n | --program-transform- \
+ | --program-transform | --program-transfor \
+ | --program-transfo | --program-transf \
+ | --program-trans | --program-tran \
+ | --progr-tra | --program-tr | --program-t)
+ ac_prev=program_transform_name ;;
+ -program-transform-name=* | --program-transform-name=* \
+ | --program-transform-nam=* | --program-transform-na=* \
+ | --program-transform-n=* | --program-transform-=* \
+ | --program-transform=* | --program-transfor=* \
+ | --program-transfo=* | --program-transf=* \
+ | --program-trans=* | --program-tran=* \
+ | --progr-tra=* | --program-tr=* | --program-t=*)
+ program_transform_name=$ac_optarg ;;
+
+ -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
+ ac_prev=pdfdir ;;
+ -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
+ pdfdir=$ac_optarg ;;
+
+ -psdir | --psdir | --psdi | --psd | --ps)
+ ac_prev=psdir ;;
+ -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
+ psdir=$ac_optarg ;;
+
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil)
+ silent=yes ;;
+
+ -runstatedir | --runstatedir | --runstatedi | --runstated \
+ | --runstate | --runstat | --runsta | --runst | --runs \
+ | --run | --ru | --r)
+ ac_prev=runstatedir ;;
+ -runstatedir=* | --runstatedir=* | --runstatedi=* | --runstated=* \
+ | --runstate=* | --runstat=* | --runsta=* | --runst=* | --runs=* \
+ | --run=* | --ru=* | --r=*)
+ runstatedir=$ac_optarg ;;
+
+ -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
+ ac_prev=sbindir ;;
+ -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+ | --sbi=* | --sb=*)
+ sbindir=$ac_optarg ;;
+
+ -sharedstatedir | --sharedstatedir | --sharedstatedi \
+ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+ | --sharedst | --shareds | --shared | --share | --shar \
+ | --sha | --sh)
+ ac_prev=sharedstatedir ;;
+ -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
+ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+ | --sha=* | --sh=*)
+ sharedstatedir=$ac_optarg ;;
+
+ -site | --site | --sit)
+ ac_prev=site ;;
+ -site=* | --site=* | --sit=*)
+ site=$ac_optarg ;;
+
+ -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+ ac_prev=srcdir ;;
+ -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+ srcdir=$ac_optarg ;;
+
+ -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+ | --syscon | --sysco | --sysc | --sys | --sy)
+ ac_prev=sysconfdir ;;
+ -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+ sysconfdir=$ac_optarg ;;
+
+ -target | --target | --targe | --targ | --tar | --ta | --t)
+ ac_prev=target_alias ;;
+ -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+ target_alias=$ac_optarg ;;
+
+ -v | -verbose | --verbose | --verbos | --verbo | --verb)
+ verbose=yes ;;
+
+ -version | --version | --versio | --versi | --vers | -V)
+ ac_init_version=: ;;
+
+ -with-* | --with-*)
+ ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+ as_fn_error $? "invalid package name: $ac_useropt"
+ ac_useropt_orig=$ac_useropt
+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+ case $ac_user_opts in
+ *"
+"with_$ac_useropt"
+"*) ;;
+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
+ ac_unrecognized_sep=', ';;
+ esac
+ eval with_$ac_useropt=\$ac_optarg ;;
+
+ -without-* | --without-*)
+ ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+ as_fn_error $? "invalid package name: $ac_useropt"
+ ac_useropt_orig=$ac_useropt
+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+ case $ac_user_opts in
+ *"
+"with_$ac_useropt"
+"*) ;;
+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"
+ ac_unrecognized_sep=', ';;
+ esac
+ eval with_$ac_useropt=no ;;
+
+ --x)
+ # Obsolete; use --with-x.
+ with_x=yes ;;
+
+ -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
+ | --x-incl | --x-inc | --x-in | --x-i)
+ ac_prev=x_includes ;;
+ -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+ x_includes=$ac_optarg ;;
+
+ -x-libraries | --x-libraries | --x-librarie | --x-librari \
+ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+ ac_prev=x_libraries ;;
+ -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+ x_libraries=$ac_optarg ;;
+
+ -*) as_fn_error $? "unrecognized option: \`$ac_option'
+Try \`$0 --help' for more information"
+ ;;
+
+ *=*)
+ ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
+ # Reject names that are not valid shell variable names.
+ case $ac_envvar in #(
+ '' | [0-9]* | *[!_$as_cr_alnum]* )
+ as_fn_error $? "invalid variable name: \`$ac_envvar'" ;;
+ esac
+ eval $ac_envvar=\$ac_optarg
+ export $ac_envvar ;;
+
+ *)
+ # FIXME: should be removed in autoconf 3.0.
+ $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
+ expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+ $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
+ : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}"
+ ;;
+
+ esac
+done
+
+if test -n "$ac_prev"; then
+ ac_option=--`echo $ac_prev | sed 's/_/-/g'`
+ as_fn_error $? "missing argument to $ac_option"
+fi
+
+if test -n "$ac_unrecognized_opts"; then
+ case $enable_option_checking in
+ no) ;;
+ fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;;
+ *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
+ esac
+fi
+
+# Check all directory arguments for consistency.
+for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \
+ datadir sysconfdir sharedstatedir localstatedir includedir \
+ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
+ libdir localedir mandir runstatedir
+do
+ eval ac_val=\$$ac_var
+ # Remove trailing slashes.
+ case $ac_val in
+ */ )
+ ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
+ eval $ac_var=\$ac_val;;
+ esac
+ # Be sure to have absolute directory names.
+ case $ac_val in
+ [\\/$]* | ?:[\\/]* ) continue;;
+ NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
+ esac
+ as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val"
+done
+
+# There might be people who depend on the old broken behavior: `$host'
+# used to hold the argument of --host etc.
+# FIXME: To remove some day.
+build=$build_alias
+host=$host_alias
+target=$target_alias
+
+# FIXME: To remove some day.
+if test "x$host_alias" != x; then
+ if test "x$build_alias" = x; then
+ cross_compiling=maybe
+ elif test "x$build_alias" != "x$host_alias"; then
+ cross_compiling=yes
+ fi
+fi
+
+ac_tool_prefix=
+test -n "$host_alias" && ac_tool_prefix=$host_alias-
+
+test "$silent" = yes && exec 6>/dev/null
+
+
+ac_pwd=`pwd` && test -n "$ac_pwd" &&
+ac_ls_di=`ls -di .` &&
+ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
+ as_fn_error $? "working directory cannot be determined"
+test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
+ as_fn_error $? "pwd does not report name of working directory"
+
+
+# Find the source files, if location was not specified.
+if test -z "$srcdir"; then
+ ac_srcdir_defaulted=yes
+ # Try the directory containing this script, then the parent directory.
+ ac_confdir=`$as_dirname -- "$as_myself" ||
+$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_myself" : 'X\(//\)[^/]' \| \
+ X"$as_myself" : 'X\(//\)$' \| \
+ X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_myself" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ srcdir=$ac_confdir
+ if test ! -r "$srcdir/$ac_unique_file"; then
+ srcdir=..
+ fi
+else
+ ac_srcdir_defaulted=no
+fi
+if test ! -r "$srcdir/$ac_unique_file"; then
+ test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
+ as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir"
+fi
+ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
+ac_abs_confdir=`(
+ cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg"
+ pwd)`
+# When building in place, set srcdir=.
+if test "$ac_abs_confdir" = "$ac_pwd"; then
+ srcdir=.
+fi
+# Remove unnecessary trailing slashes from srcdir.
+# Double slashes in file names in object file debugging info
+# mess up M-x gdb in Emacs.
+case $srcdir in
+*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
+esac
+for ac_var in $ac_precious_vars; do
+ eval ac_env_${ac_var}_set=\${${ac_var}+set}
+ eval ac_env_${ac_var}_value=\$${ac_var}
+ eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
+ eval ac_cv_env_${ac_var}_value=\$${ac_var}
+done
+
+#
+# Report the --help message.
+#
+if test "$ac_init_help" = "long"; then
+ # Omit some internal or obsolete options to make the list less imposing.
+ # This message is too long to be a string in the A/UX 3.1 sh.
+ cat <<_ACEOF
+\`configure' configures this package to adapt to many kinds of systems.
+
+Usage: $0 [OPTION]... [VAR=VALUE]...
+
+To assign environment variables (e.g., CC, CFLAGS...), specify them as
+VAR=VALUE. See below for descriptions of some of the useful variables.
+
+Defaults for the options are specified in brackets.
+
+Configuration:
+ -h, --help display this help and exit
+ --help=short display options specific to this package
+ --help=recursive display the short help of all the included packages
+ -V, --version display version information and exit
+ -q, --quiet, --silent do not print \`checking ...' messages
+ --cache-file=FILE cache test results in FILE [disabled]
+ -C, --config-cache alias for \`--cache-file=config.cache'
+ -n, --no-create do not create output files
+ --srcdir=DIR find the sources in DIR [configure dir or \`..']
+
+Installation directories:
+ --prefix=PREFIX install architecture-independent files in PREFIX
+ [$ac_default_prefix]
+ --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
+ [PREFIX]
+
+By default, \`make install' will install all the files in
+\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
+an installation prefix other than \`$ac_default_prefix' using \`--prefix',
+for instance \`--prefix=\$HOME'.
+
+For better control, use the options below.
+
+Fine tuning of the installation directories:
+ --bindir=DIR user executables [EPREFIX/bin]
+ --sbindir=DIR system admin executables [EPREFIX/sbin]
+ --libexecdir=DIR program executables [EPREFIX/libexec]
+ --sysconfdir=DIR read-only single-machine data [PREFIX/etc]
+ --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
+ --localstatedir=DIR modifiable single-machine data [PREFIX/var]
+ --runstatedir=DIR modifiable per-process data [LOCALSTATEDIR/run]
+ --libdir=DIR object code libraries [EPREFIX/lib]
+ --includedir=DIR C header files [PREFIX/include]
+ --oldincludedir=DIR C header files for non-gcc [/usr/include]
+ --datarootdir=DIR read-only arch.-independent data root [PREFIX/share]
+ --datadir=DIR read-only architecture-independent data [DATAROOTDIR]
+ --infodir=DIR info documentation [DATAROOTDIR/info]
+ --localedir=DIR locale-dependent data [DATAROOTDIR/locale]
+ --mandir=DIR man documentation [DATAROOTDIR/man]
+ --docdir=DIR documentation root [DATAROOTDIR/doc/PACKAGE]
+ --htmldir=DIR html documentation [DOCDIR]
+ --dvidir=DIR dvi documentation [DOCDIR]
+ --pdfdir=DIR pdf documentation [DOCDIR]
+ --psdir=DIR ps documentation [DOCDIR]
+_ACEOF
+
+ cat <<\_ACEOF
+_ACEOF
+fi
+
+if test -n "$ac_init_help"; then
+
+ cat <<\_ACEOF
+
+Optional Packages:
+ --with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
+ --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
+ --without-rlm_couchbase build without rlm_couchbase
+ --with-jsonc-include-dir=DIR
+ Directory where the json-c includes may be found
+ --with-jsonc-lib-dir=DIR
+ Directory where the json-c libraries may be found
+ --with-jsonc-dir=DIR Base directory where json-c is installed
+ --with-libcouchbase-include-dir=DIR
+ Directory where the libcouchbase includes may be
+ found
+ --with-libcouchbase-lib-dir=DIR
+ Directory where the libcouchbase libraries may be
+ found
+ --with-libcouchbase-dir=DIR
+ Base directory where libcouchbase is installed
+
+Some influential environment variables:
+ CC C compiler command
+ CFLAGS C compiler flags
+ LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a
+ nonstandard directory <lib dir>
+ LIBS libraries to pass to the linker, e.g. -l<library>
+ CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if
+ you have headers in a nonstandard directory <include dir>
+ CPP C preprocessor
+
+Use these variables to override the choices made by `configure' or to help
+it to find libraries and programs with nonstandard names/locations.
+
+Report bugs to the package provider.
+_ACEOF
+ac_status=$?
+fi
+
+if test "$ac_init_help" = "recursive"; then
+ # If there are subdirs, report their specific --help.
+ for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
+ test -d "$ac_dir" ||
+ { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||
+ continue
+ ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+ ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+ # A ".." for each directory in $ac_dir_suffix.
+ ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+ case $ac_top_builddir_sub in
+ "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+ esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+ .) # We are building in place.
+ ac_srcdir=.
+ ac_top_srcdir=$ac_top_builddir_sub
+ ac_abs_top_srcdir=$ac_pwd ;;
+ [\\/]* | ?:[\\/]* ) # Absolute name.
+ ac_srcdir=$srcdir$ac_dir_suffix;
+ ac_top_srcdir=$srcdir
+ ac_abs_top_srcdir=$srcdir ;;
+ *) # Relative name.
+ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+ ac_top_srcdir=$ac_top_build_prefix$srcdir
+ ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+ cd "$ac_dir" || { ac_status=$?; continue; }
+ # Check for guested configure.
+ if test -f "$ac_srcdir/configure.gnu"; then
+ echo &&
+ $SHELL "$ac_srcdir/configure.gnu" --help=recursive
+ elif test -f "$ac_srcdir/configure"; then
+ echo &&
+ $SHELL "$ac_srcdir/configure" --help=recursive
+ else
+ $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
+ fi || ac_status=$?
+ cd "$ac_pwd" || { ac_status=$?; break; }
+ done
+fi
+
+test -n "$ac_init_help" && exit $ac_status
+if $ac_init_version; then
+ cat <<\_ACEOF
+configure
+generated by GNU Autoconf 2.69
+
+Copyright (C) 2012 Free Software Foundation, Inc.
+This configure script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it.
+_ACEOF
+ exit
+fi
+
+## ------------------------ ##
+## Autoconf initialization. ##
+## ------------------------ ##
+
+# ac_fn_c_try_compile LINENO
+# --------------------------
+# Try to compile conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_compile ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ rm -f conftest.$ac_objext
+ if { { ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_compile") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ grep -v '^ *+' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ mv -f conftest.er1 conftest.err
+ fi
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=1
+fi
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+ as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_compile
+
+# ac_fn_c_try_cpp LINENO
+# ----------------------
+# Try to preprocess conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_cpp ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ if { { ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ grep -v '^ *+' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ mv -f conftest.er1 conftest.err
+ fi
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } > conftest.i && {
+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ }; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=1
+fi
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+ as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_cpp
+
+# ac_fn_c_try_link LINENO
+# -----------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_link ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ rm -f conftest.$ac_objext conftest$ac_exeext
+ if { { ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ grep -v '^ *+' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ mv -f conftest.er1 conftest.err
+ fi
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest$ac_exeext && {
+ test "$cross_compiling" = yes ||
+ test -x conftest$ac_exeext
+ }; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=1
+fi
+ # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
+ # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
+ # interfere with the next link command; also delete a directory that is
+ # left behind by Apple's compiler. We do this before executing the actions.
+ rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+ as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_link
+
+# ac_fn_c_check_func LINENO FUNC VAR
+# ----------------------------------
+# Tests whether FUNC exists, setting the cache variable VAR accordingly
+ac_fn_c_check_func ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+/* Define $2 to an innocuous variant, in case <limits.h> declares $2.
+ For example, HP-UX 11i <limits.h> declares gettimeofday. */
+#define $2 innocuous_$2
+
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char $2 (); below.
+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ <limits.h> exists even on freestanding compilers. */
+
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+
+#undef $2
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char $2 ();
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined __stub_$2 || defined __stub___$2
+choke me
+#endif
+
+int
+main ()
+{
+return $2 ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ eval "$3=yes"
+else
+ eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_func
+cat >config.log <<_ACEOF
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
+
+It was created by $as_me, which was
+generated by GNU Autoconf 2.69. Invocation command line was
+
+ $ $0 $@
+
+_ACEOF
+exec 5>>config.log
+{
+cat <<_ASUNAME
+## --------- ##
+## Platform. ##
+## --------- ##
+
+hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
+/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown`
+
+/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`
+/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
+/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown`
+/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown`
+/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown`
+/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown`
+
+_ASUNAME
+
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ $as_echo "PATH: $as_dir"
+ done
+IFS=$as_save_IFS
+
+} >&5
+
+cat >&5 <<_ACEOF
+
+
+## ----------- ##
+## Core tests. ##
+## ----------- ##
+
+_ACEOF
+
+
+# Keep a trace of the command line.
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Strip out --silent because we don't want to record it for future runs.
+# Also quote any args containing shell meta-characters.
+# Make two passes to allow for proper duplicate-argument suppression.
+ac_configure_args=
+ac_configure_args0=
+ac_configure_args1=
+ac_must_keep_next=false
+for ac_pass in 1 2
+do
+ for ac_arg
+ do
+ case $ac_arg in
+ -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil)
+ continue ;;
+ *\'*)
+ ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+ esac
+ case $ac_pass in
+ 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;;
+ 2)
+ as_fn_append ac_configure_args1 " '$ac_arg'"
+ if test $ac_must_keep_next = true; then
+ ac_must_keep_next=false # Got value, back to normal.
+ else
+ case $ac_arg in
+ *=* | --config-cache | -C | -disable-* | --disable-* \
+ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
+ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
+ | -with-* | --with-* | -without-* | --without-* | --x)
+ case "$ac_configure_args0 " in
+ "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
+ esac
+ ;;
+ -* ) ac_must_keep_next=true ;;
+ esac
+ fi
+ as_fn_append ac_configure_args " '$ac_arg'"
+ ;;
+ esac
+ done
+done
+{ ac_configure_args0=; unset ac_configure_args0;}
+{ ac_configure_args1=; unset ac_configure_args1;}
+
+# When interrupted or exit'd, cleanup temporary files, and complete
+# config.log. We remove comments because anyway the quotes in there
+# would cause problems or look ugly.
+# WARNING: Use '\'' to represent an apostrophe within the trap.
+# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
+trap 'exit_status=$?
+ # Save into config.log some information that might help in debugging.
+ {
+ echo
+
+ $as_echo "## ---------------- ##
+## Cache variables. ##
+## ---------------- ##"
+ echo
+ # The following way of writing the cache mishandles newlines in values,
+(
+ for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
+ eval ac_val=\$$ac_var
+ case $ac_val in #(
+ *${as_nl}*)
+ case $ac_var in #(
+ *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+ esac
+ case $ac_var in #(
+ _ | IFS | as_nl) ;; #(
+ BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+ *) { eval $ac_var=; unset $ac_var;} ;;
+ esac ;;
+ esac
+ done
+ (set) 2>&1 |
+ case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
+ *${as_nl}ac_space=\ *)
+ sed -n \
+ "s/'\''/'\''\\\\'\'''\''/g;
+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
+ ;; #(
+ *)
+ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+ ;;
+ esac |
+ sort
+)
+ echo
+
+ $as_echo "## ----------------- ##
+## Output variables. ##
+## ----------------- ##"
+ echo
+ for ac_var in $ac_subst_vars
+ do
+ eval ac_val=\$$ac_var
+ case $ac_val in
+ *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+ esac
+ $as_echo "$ac_var='\''$ac_val'\''"
+ done | sort
+ echo
+
+ if test -n "$ac_subst_files"; then
+ $as_echo "## ------------------- ##
+## File substitutions. ##
+## ------------------- ##"
+ echo
+ for ac_var in $ac_subst_files
+ do
+ eval ac_val=\$$ac_var
+ case $ac_val in
+ *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+ esac
+ $as_echo "$ac_var='\''$ac_val'\''"
+ done | sort
+ echo
+ fi
+
+ if test -s confdefs.h; then
+ $as_echo "## ----------- ##
+## confdefs.h. ##
+## ----------- ##"
+ echo
+ cat confdefs.h
+ echo
+ fi
+ test "$ac_signal" != 0 &&
+ $as_echo "$as_me: caught signal $ac_signal"
+ $as_echo "$as_me: exit $exit_status"
+ } >&5
+ rm -f core *.core core.conftest.* &&
+ rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
+ exit $exit_status
+' 0
+for ac_signal in 1 2 13 15; do
+ trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal
+done
+ac_signal=0
+
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -f -r conftest* confdefs.h
+
+$as_echo "/* confdefs.h */" > confdefs.h
+
+# Predefined preprocessor variables.
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_NAME "$PACKAGE_NAME"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_VERSION "$PACKAGE_VERSION"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_STRING "$PACKAGE_STRING"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_URL "$PACKAGE_URL"
+_ACEOF
+
+
+# Let the site file select an alternate cache file if it wants to.
+# Prefer an explicitly selected file to automatically selected ones.
+ac_site_file1=NONE
+ac_site_file2=NONE
+if test -n "$CONFIG_SITE"; then
+ # We do not want a PATH search for config.site.
+ case $CONFIG_SITE in #((
+ -*) ac_site_file1=./$CONFIG_SITE;;
+ */*) ac_site_file1=$CONFIG_SITE;;
+ *) ac_site_file1=./$CONFIG_SITE;;
+ esac
+elif test "x$prefix" != xNONE; then
+ ac_site_file1=$prefix/share/config.site
+ ac_site_file2=$prefix/etc/config.site
+else
+ ac_site_file1=$ac_default_prefix/share/config.site
+ ac_site_file2=$ac_default_prefix/etc/config.site
+fi
+for ac_site_file in "$ac_site_file1" "$ac_site_file2"
+do
+ test "x$ac_site_file" = xNONE && continue
+ if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5
+$as_echo "$as_me: loading site script $ac_site_file" >&6;}
+ sed 's/^/| /' "$ac_site_file" >&5
+ . "$ac_site_file" \
+ || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "failed to load site script $ac_site_file
+See \`config.log' for more details" "$LINENO" 5; }
+ fi
+done
+
+if test -r "$cache_file"; then
+ # Some versions of bash will fail to source /dev/null (special files
+ # actually), so we avoid doing that. DJGPP emulates it as a regular file.
+ if test /dev/null != "$cache_file" && test -f "$cache_file"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5
+$as_echo "$as_me: loading cache $cache_file" >&6;}
+ case $cache_file in
+ [\\/]* | ?:[\\/]* ) . "$cache_file";;
+ *) . "./$cache_file";;
+ esac
+ fi
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5
+$as_echo "$as_me: creating cache $cache_file" >&6;}
+ >$cache_file
+fi
+
+# Check that the precious variables saved in the cache have kept the same
+# value.
+ac_cache_corrupted=false
+for ac_var in $ac_precious_vars; do
+ eval ac_old_set=\$ac_cv_env_${ac_var}_set
+ eval ac_new_set=\$ac_env_${ac_var}_set
+ eval ac_old_val=\$ac_cv_env_${ac_var}_value
+ eval ac_new_val=\$ac_env_${ac_var}_value
+ case $ac_old_set,$ac_new_set in
+ set,)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
+ ac_cache_corrupted=: ;;
+ ,set)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
+ ac_cache_corrupted=: ;;
+ ,);;
+ *)
+ if test "x$ac_old_val" != "x$ac_new_val"; then
+ # differences in whitespace do not lead to failure.
+ ac_old_val_w=`echo x $ac_old_val`
+ ac_new_val_w=`echo x $ac_new_val`
+ if test "$ac_old_val_w" != "$ac_new_val_w"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5
+$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
+ ac_cache_corrupted=:
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
+$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
+ eval $ac_var=\$ac_old_val
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5
+$as_echo "$as_me: former value: \`$ac_old_val'" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5
+$as_echo "$as_me: current value: \`$ac_new_val'" >&2;}
+ fi;;
+ esac
+ # Pass precious variables to config.status.
+ if test "$ac_new_set" = set; then
+ case $ac_new_val in
+ *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
+ *) ac_arg=$ac_var=$ac_new_val ;;
+ esac
+ case " $ac_configure_args " in
+ *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy.
+ *) as_fn_append ac_configure_args " '$ac_arg'" ;;
+ esac
+ fi
+done
+if $ac_cache_corrupted; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5
+$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
+ as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
+fi
+## -------------------- ##
+## Main body of script. ##
+## -------------------- ##
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+
+
+
+
+
+# Check whether --with-rlm_couchbase was given.
+if test "${with_rlm_couchbase+set}" = set; then :
+ withval=$with_rlm_couchbase;
+fi
+
+
+ac_config_headers="$ac_config_headers config.h"
+
+
+if test x$with_rlm_couchbase != xno; then
+
+ ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_CC="${ac_tool_prefix}gcc"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_CC"; then
+ ac_ct_CC=$CC
+ # Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_CC+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_CC"; then
+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_CC="gcc"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_CC" = x; then
+ CC=""
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ CC=$ac_ct_CC
+ fi
+else
+ CC="$ac_cv_prog_CC"
+fi
+
+if test -z "$CC"; then
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}cc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_CC="${ac_tool_prefix}cc"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ fi
+fi
+if test -z "$CC"; then
+ # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+ ac_prog_rejected=no
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
+ ac_prog_rejected=yes
+ continue
+ fi
+ ac_cv_prog_CC="cc"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+if test $ac_prog_rejected = yes; then
+ # We found a bogon in the path, so make sure we never use it.
+ set dummy $ac_cv_prog_CC
+ shift
+ if test $# != 0; then
+ # We chose a different compiler from the bogus one.
+ # However, it has the same basename, so the bogon will be chosen
+ # first if we set CC to just the basename; use the full file name.
+ shift
+ ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
+ fi
+fi
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$CC"; then
+ if test -n "$ac_tool_prefix"; then
+ for ac_prog in cl.exe
+ do
+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$CC" && break
+ done
+fi
+if test -z "$CC"; then
+ ac_ct_CC=$CC
+ for ac_prog in cl.exe
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_CC+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_CC"; then
+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_CC="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$ac_ct_CC" && break
+done
+
+ if test "x$ac_ct_CC" = x; then
+ CC=""
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ CC=$ac_ct_CC
+ fi
+fi
+
+fi
+
+
+test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "no acceptable C compiler found in \$PATH
+See \`config.log' for more details" "$LINENO" 5; }
+
+# Provide some information about the compiler.
+$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
+set X $ac_compile
+ac_compiler=$2
+for ac_option in --version -v -V -qversion; do
+ { { ac_try="$ac_compiler $ac_option >&5"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_compiler $ac_option >&5") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ sed '10a\
+... rest of stderr output deleted ...
+ 10q' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ fi
+ rm -f conftest.er1 conftest.err
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }
+done
+
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out"
+# Try to create an executable without -o first, disregard a.out.
+# It will help us diagnose broken compilers, and finding out an intuition
+# of exeext.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5
+$as_echo_n "checking whether the C compiler works... " >&6; }
+ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
+
+# The possible output files:
+ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*"
+
+ac_rmfiles=
+for ac_file in $ac_files
+do
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
+ * ) ac_rmfiles="$ac_rmfiles $ac_file";;
+ esac
+done
+rm -f $ac_rmfiles
+
+if { { ac_try="$ac_link_default"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link_default") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then :
+ # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
+# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
+# in a Makefile. We should not override ac_cv_exeext if it was cached,
+# so that the user can short-circuit this test for compilers unknown to
+# Autoconf.
+for ac_file in $ac_files ''
+do
+ test -f "$ac_file" || continue
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj )
+ ;;
+ [ab].out )
+ # We found the default executable, but exeext='' is most
+ # certainly right.
+ break;;
+ *.* )
+ if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
+ then :; else
+ ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+ fi
+ # We set ac_cv_exeext here because the later test for it is not
+ # safe: cross compilers may not add the suffix if given an `-o'
+ # argument, so we may need to know it at that point already.
+ # Even if this section looks crufty: it has the advantage of
+ # actually working.
+ break;;
+ * )
+ break;;
+ esac
+done
+test "$ac_cv_exeext" = no && ac_cv_exeext=
+
+else
+ ac_file=''
+fi
+if test -z "$ac_file"; then :
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+$as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error 77 "C compiler cannot create executables
+See \`config.log' for more details" "$LINENO" 5; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5
+$as_echo_n "checking for C compiler default output file name... " >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5
+$as_echo "$ac_file" >&6; }
+ac_exeext=$ac_cv_exeext
+
+rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out
+ac_clean_files=$ac_clean_files_save
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5
+$as_echo_n "checking for suffix of executables... " >&6; }
+if { { ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then :
+ # If both `conftest.exe' and `conftest' are `present' (well, observable)
+# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will
+# work properly (i.e., refer to `conftest.exe'), while it won't with
+# `rm'.
+for ac_file in conftest.exe conftest conftest.*; do
+ test -f "$ac_file" || continue
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
+ *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+ break;;
+ * ) break;;
+ esac
+done
+else
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+rm -f conftest conftest$ac_cv_exeext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5
+$as_echo "$ac_cv_exeext" >&6; }
+
+rm -f conftest.$ac_ext
+EXEEXT=$ac_cv_exeext
+ac_exeext=$EXEEXT
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <stdio.h>
+int
+main ()
+{
+FILE *f = fopen ("conftest.out", "w");
+ return ferror (f) || fclose (f) != 0;
+
+ ;
+ return 0;
+}
+_ACEOF
+ac_clean_files="$ac_clean_files conftest.out"
+# Check that the compiler produces executables we can run. If not, either
+# the compiler is broken, or we cross compile.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5
+$as_echo_n "checking whether we are cross compiling... " >&6; }
+if test "$cross_compiling" != yes; then
+ { { ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }
+ if { ac_try='./conftest$ac_cv_exeext'
+ { { case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_try") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }; then
+ cross_compiling=no
+ else
+ if test "$cross_compiling" = maybe; then
+ cross_compiling=yes
+ else
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot run C compiled programs.
+If you meant to cross compile, use \`--host'.
+See \`config.log' for more details" "$LINENO" 5; }
+ fi
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5
+$as_echo "$cross_compiling" >&6; }
+
+rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out
+ac_clean_files=$ac_clean_files_save
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5
+$as_echo_n "checking for suffix of object files... " >&6; }
+if ${ac_cv_objext+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.o conftest.obj
+if { { ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_compile") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then :
+ for ac_file in conftest.o conftest.obj conftest.*; do
+ test -f "$ac_file" || continue;
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;;
+ *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
+ break;;
+ esac
+done
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot compute suffix of object files: cannot compile
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+rm -f conftest.$ac_cv_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5
+$as_echo "$ac_cv_objext" >&6; }
+OBJEXT=$ac_cv_objext
+ac_objext=$OBJEXT
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
+$as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
+if ${ac_cv_c_compiler_gnu+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+#ifndef __GNUC__
+ choke me
+#endif
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_compiler_gnu=yes
+else
+ ac_compiler_gnu=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_cv_c_compiler_gnu=$ac_compiler_gnu
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5
+$as_echo "$ac_cv_c_compiler_gnu" >&6; }
+if test $ac_compiler_gnu = yes; then
+ GCC=yes
+else
+ GCC=
+fi
+ac_test_CFLAGS=${CFLAGS+set}
+ac_save_CFLAGS=$CFLAGS
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
+$as_echo_n "checking whether $CC accepts -g... " >&6; }
+if ${ac_cv_prog_cc_g+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_save_c_werror_flag=$ac_c_werror_flag
+ ac_c_werror_flag=yes
+ ac_cv_prog_cc_g=no
+ CFLAGS="-g"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_prog_cc_g=yes
+else
+ CFLAGS=""
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+else
+ ac_c_werror_flag=$ac_save_c_werror_flag
+ CFLAGS="-g"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_prog_cc_g=yes
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ ac_c_werror_flag=$ac_save_c_werror_flag
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5
+$as_echo "$ac_cv_prog_cc_g" >&6; }
+if test "$ac_test_CFLAGS" = set; then
+ CFLAGS=$ac_save_CFLAGS
+elif test $ac_cv_prog_cc_g = yes; then
+ if test "$GCC" = yes; then
+ CFLAGS="-g -O2"
+ else
+ CFLAGS="-g"
+ fi
+else
+ if test "$GCC" = yes; then
+ CFLAGS="-O2"
+ else
+ CFLAGS=
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
+$as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
+if ${ac_cv_prog_cc_c89+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_cv_prog_cc_c89=no
+ac_save_CC=$CC
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <stdarg.h>
+#include <stdio.h>
+struct stat;
+/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
+struct buf { int x; };
+FILE * (*rcsopen) (struct buf *, struct stat *, int);
+static char *e (p, i)
+ char **p;
+ int i;
+{
+ return p[i];
+}
+static char *f (char * (*g) (char **, int), char **p, ...)
+{
+ char *s;
+ va_list v;
+ va_start (v,p);
+ s = g (p, va_arg (v,int));
+ va_end (v);
+ return s;
+}
+
+/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has
+ function prototypes and stuff, but not '\xHH' hex character constants.
+ These don't provoke an error unfortunately, instead are silently treated
+ as 'x'. The following induces an error, until -std is added to get
+ proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an
+ array size at least. It's necessary to write '\x00'==0 to get something
+ that's true only with -std. */
+int osf4_cc_array ['\x00' == 0 ? 1 : -1];
+
+/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
+ inside strings and character constants. */
+#define FOO(x) 'x'
+int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
+
+int test (int i, double x);
+struct s1 {int (*f) (int a);};
+struct s2 {int (*f) (double a);};
+int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
+int argc;
+char **argv;
+int
+main ()
+{
+return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
+ ;
+ return 0;
+}
+_ACEOF
+for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
+ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
+do
+ CC="$ac_save_CC $ac_arg"
+ if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_prog_cc_c89=$ac_arg
+fi
+rm -f core conftest.err conftest.$ac_objext
+ test "x$ac_cv_prog_cc_c89" != "xno" && break
+done
+rm -f conftest.$ac_ext
+CC=$ac_save_CC
+
+fi
+# AC_CACHE_VAL
+case "x$ac_cv_prog_cc_c89" in
+ x)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
+$as_echo "none needed" >&6; } ;;
+ xno)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
+$as_echo "unsupported" >&6; } ;;
+ *)
+ CC="$CC $ac_cv_prog_cc_c89"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5
+$as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
+esac
+if test "x$ac_cv_prog_cc_c89" != xno; then :
+
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+ ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5
+$as_echo_n "checking how to run the C preprocessor... " >&6; }
+# On Suns, sometimes $CPP names a directory.
+if test -n "$CPP" && test -d "$CPP"; then
+ CPP=
+fi
+if test -z "$CPP"; then
+ if ${ac_cv_prog_CPP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ # Double quotes because CPP needs to be expanded
+ for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
+ do
+ ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+ # Use a header file that comes with gcc, so configuring glibc
+ # with a fresh cross-compiler works.
+ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ # <limits.h> exists even on freestanding compilers.
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp. "Syntax error" is here to catch this case.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+ Syntax error
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+
+else
+ # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+ # OK, works on sane cases. Now check whether nonexistent headers
+ # can be detected and how.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+ # Broken: success on invalid input.
+continue
+else
+ # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+ break
+fi
+
+ done
+ ac_cv_prog_CPP=$CPP
+
+fi
+ CPP=$ac_cv_prog_CPP
+else
+ ac_cv_prog_CPP=$CPP
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5
+$as_echo "$CPP" >&6; }
+ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+ # Use a header file that comes with gcc, so configuring glibc
+ # with a fresh cross-compiler works.
+ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ # <limits.h> exists even on freestanding compilers.
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp. "Syntax error" is here to catch this case.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+ Syntax error
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+
+else
+ # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+ # OK, works on sane cases. Now check whether nonexistent headers
+ # can be detected and how.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+ # Broken: success on invalid input.
+continue
+else
+ # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+
+else
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "C preprocessor \"$CPP\" fails sanity check
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+
+
+ jsonc_include_dir=
+
+# Check whether --with-jsonc-include-dir was given.
+if test "${with_jsonc_include_dir+set}" = set; then :
+ withval=$with_jsonc_include_dir; case "$withval" in
+ no)
+ as_fn_error $? "Need jsonc-include-dir" "$LINENO" 5
+ ;;
+ yes)
+ ;;
+ *)
+ jsonc_include_dir="$withval"
+ ;;
+ esac
+fi
+
+
+ jsonc_lib_dir=
+
+# Check whether --with-jsonc-lib-dir was given.
+if test "${with_jsonc_lib_dir+set}" = set; then :
+ withval=$with_jsonc_lib_dir; case "$withval" in
+ no)
+ as_fn_error $? "Need jsonc-lib-dir" "$LINENO" 5
+ ;;
+ yes)
+ ;;
+ *)
+ jsonc_lib_dir="$withval"
+ ;;
+ esac
+fi
+
+
+
+# Check whether --with-jsonc-dir was given.
+if test "${with_jsonc_dir+set}" = set; then :
+ withval=$with_jsonc_dir; case "$withval" in
+ no)
+ as_fn_error $? "Need json-c-dir" "$LINENO" 5
+ ;;
+ yes)
+ ;;
+ *)
+ jsonc_lib_dir="$withval/lib"
+ jsonc_include_dir="$withval/include"
+ ;;
+ esac
+fi
+
+
+
+ have_json="yes"
+ smart_try_dir="$jsonc_include_dir"
+
+
+
+ac_safe=`echo "json/json.h" | sed 'y%./+-%__pm%'`
+old_CPPFLAGS="$CPPFLAGS"
+smart_include=
+smart_include_dir="/usr/local/include /opt/include"
+
+_smart_try_dir=
+_smart_include_dir=
+
+for _prefix in $smart_prefix ""; do
+ for _dir in $smart_try_dir; do
+ _smart_try_dir="${_smart_try_dir} ${_dir}/${_prefix}"
+ done
+
+ for _dir in $smart_include_dir; do
+ _smart_include_dir="${_smart_include_dir} ${_dir}/${_prefix}"
+ done
+done
+
+if test "x$_smart_try_dir" != "x"; then
+ for try in $_smart_try_dir; do
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for json/json.h in $try" >&5
+$as_echo_n "checking for json/json.h in $try... " >&6; }
+ CPPFLAGS="-isystem $try $old_CPPFLAGS"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+ #include <json/json.h>
+int
+main ()
+{
+int a = 1;
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+ smart_include="-isystem $try"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ break
+
+else
+
+ smart_include=
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ done
+ CPPFLAGS="$old_CPPFLAGS"
+fi
+
+if test "x$smart_include" = "x"; then
+ for _prefix in $smart_prefix; do
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${_prefix}/json/json.h" >&5
+$as_echo_n "checking for ${_prefix}/json/json.h... " >&6; }
+
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+ #include <json/json.h>
+int
+main ()
+{
+int a = 1;
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+ smart_include="-isystem ${_prefix}/"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ break
+
+else
+
+ smart_include=
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ done
+fi
+
+if test "x$smart_include" = "x"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for json/json.h" >&5
+$as_echo_n "checking for json/json.h... " >&6; }
+
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+ #include <json/json.h>
+int
+main ()
+{
+int a = 1;
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+ smart_include=" "
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ break
+
+else
+
+ smart_include=
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+
+if test "x$smart_include" = "x"; then
+
+ for try in $_smart_include_dir; do
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for json/json.h in $try" >&5
+$as_echo_n "checking for json/json.h in $try... " >&6; }
+ CPPFLAGS="-isystem $try $old_CPPFLAGS"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+ #include <json/json.h>
+int
+main ()
+{
+int a = 1;
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+ smart_include="-isystem $try"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ break
+
+else
+
+ smart_include=
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ done
+ CPPFLAGS="$old_CPPFLAGS"
+fi
+
+if test "x$smart_include" != "x"; then
+ eval "ac_cv_header_$ac_safe=yes"
+ CPPFLAGS="$smart_include $old_CPPFLAGS"
+ SMART_CPPFLAGS="$smart_include $SMART_CPPFLAGS"
+fi
+
+smart_prefix=
+
+ if test "x$ac_cv_header_json_json_h" != "xyes"; then
+
+
+ac_safe=`echo "json-c/json.h" | sed 'y%./+-%__pm%'`
+old_CPPFLAGS="$CPPFLAGS"
+smart_include=
+smart_include_dir="/usr/local/include /opt/include"
+
+_smart_try_dir=
+_smart_include_dir=
+
+for _prefix in $smart_prefix ""; do
+ for _dir in $smart_try_dir; do
+ _smart_try_dir="${_smart_try_dir} ${_dir}/${_prefix}"
+ done
+
+ for _dir in $smart_include_dir; do
+ _smart_include_dir="${_smart_include_dir} ${_dir}/${_prefix}"
+ done
+done
+
+if test "x$_smart_try_dir" != "x"; then
+ for try in $_smart_try_dir; do
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for json-c/json.h in $try" >&5
+$as_echo_n "checking for json-c/json.h in $try... " >&6; }
+ CPPFLAGS="-isystem $try $old_CPPFLAGS"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+ #include <json-c/json.h>
+int
+main ()
+{
+int a = 1;
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+ smart_include="-isystem $try"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ break
+
+else
+
+ smart_include=
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ done
+ CPPFLAGS="$old_CPPFLAGS"
+fi
+
+if test "x$smart_include" = "x"; then
+ for _prefix in $smart_prefix; do
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${_prefix}/json-c/json.h" >&5
+$as_echo_n "checking for ${_prefix}/json-c/json.h... " >&6; }
+
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+ #include <json-c/json.h>
+int
+main ()
+{
+int a = 1;
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+ smart_include="-isystem ${_prefix}/"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ break
+
+else
+
+ smart_include=
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ done
+fi
+
+if test "x$smart_include" = "x"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for json-c/json.h" >&5
+$as_echo_n "checking for json-c/json.h... " >&6; }
+
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+ #include <json-c/json.h>
+int
+main ()
+{
+int a = 1;
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+ smart_include=" "
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ break
+
+else
+
+ smart_include=
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+
+if test "x$smart_include" = "x"; then
+
+ for try in $_smart_include_dir; do
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for json-c/json.h in $try" >&5
+$as_echo_n "checking for json-c/json.h in $try... " >&6; }
+ CPPFLAGS="-isystem $try $old_CPPFLAGS"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+ #include <json-c/json.h>
+int
+main ()
+{
+int a = 1;
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+ smart_include="-isystem $try"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ break
+
+else
+
+ smart_include=
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ done
+ CPPFLAGS="$old_CPPFLAGS"
+fi
+
+if test "x$smart_include" != "x"; then
+ eval "ac_cv_header_$ac_safe=yes"
+ CPPFLAGS="$smart_include $old_CPPFLAGS"
+ SMART_CPPFLAGS="$smart_include $SMART_CPPFLAGS"
+fi
+
+smart_prefix=
+
+ if test "x$ac_cv_header_jsonmc_json_h" != "xyes"; then
+ have_json="no"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: json-c headers not found. Use --with-jsonc-include-dir=<path>." >&5
+$as_echo "$as_me: WARNING: json-c headers not found. Use --with-jsonc-include-dir=<path>." >&2;}
+ fail="$fail json.h"
+ else
+
+$as_echo "#define HAVE_JSONMC_JSON_H 1" >>confdefs.h
+
+ fi
+ else
+
+$as_echo "#define HAVE_JSON_JSON_H 1" >>confdefs.h
+
+ fi
+
+
+ smart_try_dir="$jsonc_lib_dir"
+
+
+sm_lib_safe=`echo "json-c" | sed 'y%./+-%__p_%'`
+sm_func_safe=`echo "json_c_version" | sed 'y%./+-%__p_%'`
+
+old_LIBS="$LIBS"
+old_CPPFLAGS="$CPPFLAGS"
+smart_lib=
+smart_ldflags=
+smart_lib_dir=
+
+if test "x$smart_try_dir" != "x"; then
+ for try in $smart_try_dir; do
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for json_c_version in -ljson-c in $try" >&5
+$as_echo_n "checking for json_c_version in -ljson-c in $try... " >&6; }
+ LIBS="-ljson-c $old_LIBS"
+ CPPFLAGS="-L$try -Wl,-rpath,$try $old_CPPFLAGS"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+extern char json_c_version();
+int
+main ()
+{
+json_c_version()
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+
+ smart_lib="-ljson-c"
+ smart_ldflags="-L$try -Wl,-rpath,$try"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ break
+
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ done
+ LIBS="$old_LIBS"
+ CPPFLAGS="$old_CPPFLAGS"
+fi
+
+if test "x$smart_lib" = "x"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for json_c_version in -ljson-c" >&5
+$as_echo_n "checking for json_c_version in -ljson-c... " >&6; }
+ LIBS="-ljson-c $old_LIBS"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+extern char json_c_version();
+int
+main ()
+{
+json_c_version()
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+
+ smart_lib="-ljson-c"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ LIBS="$old_LIBS"
+fi
+
+if test "x$smart_lib" = "x"; then
+ for try in /usr/local/lib /opt/lib; do
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for json_c_version in -ljson-c in $try" >&5
+$as_echo_n "checking for json_c_version in -ljson-c in $try... " >&6; }
+ LIBS="-ljson-c $old_LIBS"
+ CPPFLAGS="-L$try -Wl,-rpath,$try $old_CPPFLAGS"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+extern char json_c_version();
+int
+main ()
+{
+json_c_version()
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+
+ smart_lib="-ljson-c"
+ smart_ldflags="-L$try -Wl,-rpath,$try"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ break
+
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ done
+ LIBS="$old_LIBS"
+ CPPFLAGS="$old_CPPFLAGS"
+fi
+
+if test "x$smart_lib" != "x"; then
+ eval "ac_cv_lib_${sm_lib_safe}_${sm_func_safe}=yes"
+ LIBS="$smart_ldflags $smart_lib $old_LIBS"
+ SMART_LIBS="$smart_ldflags $smart_lib $SMART_LIBS"
+fi
+
+ if test "x$ac_cv_lib_json_c_json_c_version" != "xyes"; then
+
+
+sm_lib_safe=`echo "json" | sed 'y%./+-%__p_%'`
+sm_func_safe=`echo "json_tokener_new" | sed 'y%./+-%__p_%'`
+
+old_LIBS="$LIBS"
+old_CPPFLAGS="$CPPFLAGS"
+smart_lib=
+smart_ldflags=
+smart_lib_dir=
+
+if test "x$smart_try_dir" != "x"; then
+ for try in $smart_try_dir; do
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for json_tokener_new in -ljson in $try" >&5
+$as_echo_n "checking for json_tokener_new in -ljson in $try... " >&6; }
+ LIBS="-ljson $old_LIBS"
+ CPPFLAGS="-L$try -Wl,-rpath,$try $old_CPPFLAGS"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+extern char json_tokener_new();
+int
+main ()
+{
+json_tokener_new()
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+
+ smart_lib="-ljson"
+ smart_ldflags="-L$try -Wl,-rpath,$try"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ break
+
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ done
+ LIBS="$old_LIBS"
+ CPPFLAGS="$old_CPPFLAGS"
+fi
+
+if test "x$smart_lib" = "x"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for json_tokener_new in -ljson" >&5
+$as_echo_n "checking for json_tokener_new in -ljson... " >&6; }
+ LIBS="-ljson $old_LIBS"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+extern char json_tokener_new();
+int
+main ()
+{
+json_tokener_new()
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+
+ smart_lib="-ljson"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ LIBS="$old_LIBS"
+fi
+
+if test "x$smart_lib" = "x"; then
+ for try in /usr/local/lib /opt/lib; do
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for json_tokener_new in -ljson in $try" >&5
+$as_echo_n "checking for json_tokener_new in -ljson in $try... " >&6; }
+ LIBS="-ljson $old_LIBS"
+ CPPFLAGS="-L$try -Wl,-rpath,$try $old_CPPFLAGS"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+extern char json_tokener_new();
+int
+main ()
+{
+json_tokener_new()
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+
+ smart_lib="-ljson"
+ smart_ldflags="-L$try -Wl,-rpath,$try"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ break
+
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ done
+ LIBS="$old_LIBS"
+ CPPFLAGS="$old_CPPFLAGS"
+fi
+
+if test "x$smart_lib" != "x"; then
+ eval "ac_cv_lib_${sm_lib_safe}_${sm_func_safe}=yes"
+ LIBS="$smart_ldflags $smart_lib $old_LIBS"
+ SMART_LIBS="$smart_ldflags $smart_lib $SMART_LIBS"
+fi
+
+ if test "x$ac_cv_lib_json_json_tokener_new" != "xyes"; then
+ have_json="no"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: json-c libraries not found. Use --with-jsonc-lib-dir=<path>." >&5
+$as_echo "$as_me: WARNING: json-c libraries not found. Use --with-jsonc-lib-dir=<path>." >&2;}
+ fi
+ fi
+
+ if test "x$have_json" = "xyes"; then
+ LDFLAGS="$SMART_LIBS"
+
+ for ac_func in \
+ json_c_version \
+ json_object_get_string_len \
+ json_object_object_get_ex \
+ json_object_new_int64 \
+ json_tokener_error_desc \
+ json_tokener_get_error
+
+do :
+ as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
+ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
+if eval test \"x\$"$as_ac_var"\" = x"yes"; then :
+ cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+done
+
+ else
+ fail="$fail json-c"
+ fi
+
+
+ libcouchbase_include_dir=
+
+# Check whether --with-libcouchbase-include-dir was given.
+if test "${with_libcouchbase_include_dir+set}" = set; then :
+ withval=$with_libcouchbase_include_dir; case "$withval" in
+ no)
+ as_fn_error $? "Need libcouchbase-include-dir" "$LINENO" 5
+ ;;
+ yes)
+ ;;
+ *)
+ libcouchbase_include_dir="$withval"
+ ;;
+ esac
+fi
+
+
+ libcouchbase_lib_dir=
+
+# Check whether --with-libcouchbase-lib-dir was given.
+if test "${with_libcouchbase_lib_dir+set}" = set; then :
+ withval=$with_libcouchbase_lib_dir; case "$withval" in
+ no)
+ as_fn_error $? "Need libcouchbase-lib-dir" "$LINENO" 5
+ ;;
+ yes)
+ ;;
+ *)
+ libcouchbase_lib_dir="$withval"
+ ;;
+ esac
+fi
+
+
+
+# Check whether --with-libcouchbase-dir was given.
+if test "${with_libcouchbase_dir+set}" = set; then :
+ withval=$with_libcouchbase_dir; case "$withval" in
+ no)
+ as_fn_error $? "Need libcouchbase-dir" "$LINENO" 5
+ ;;
+ yes)
+ ;;
+ *)
+ libcouchbase_lib_dir="$withval/lib"
+ libcouchbase_include_dir="$withval/include"
+ ;;
+ esac
+fi
+
+
+
+ have_couchbase="yes"
+ smart_try_dir="$libcouchbase_include_dir"
+
+
+ac_safe=`echo "libcouchbase/couchbase.h" | sed 'y%./+-%__pm%'`
+old_CPPFLAGS="$CPPFLAGS"
+smart_include=
+smart_include_dir="/usr/local/include /opt/include"
+
+_smart_try_dir=
+_smart_include_dir=
+
+for _prefix in $smart_prefix ""; do
+ for _dir in $smart_try_dir; do
+ _smart_try_dir="${_smart_try_dir} ${_dir}/${_prefix}"
+ done
+
+ for _dir in $smart_include_dir; do
+ _smart_include_dir="${_smart_include_dir} ${_dir}/${_prefix}"
+ done
+done
+
+if test "x$_smart_try_dir" != "x"; then
+ for try in $_smart_try_dir; do
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for libcouchbase/couchbase.h in $try" >&5
+$as_echo_n "checking for libcouchbase/couchbase.h in $try... " >&6; }
+ CPPFLAGS="-isystem $try $old_CPPFLAGS"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+ #include <libcouchbase/couchbase.h>
+int
+main ()
+{
+int a = 1;
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+ smart_include="-isystem $try"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ break
+
+else
+
+ smart_include=
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ done
+ CPPFLAGS="$old_CPPFLAGS"
+fi
+
+if test "x$smart_include" = "x"; then
+ for _prefix in $smart_prefix; do
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${_prefix}/libcouchbase/couchbase.h" >&5
+$as_echo_n "checking for ${_prefix}/libcouchbase/couchbase.h... " >&6; }
+
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+ #include <libcouchbase/couchbase.h>
+int
+main ()
+{
+int a = 1;
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+ smart_include="-isystem ${_prefix}/"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ break
+
+else
+
+ smart_include=
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ done
+fi
+
+if test "x$smart_include" = "x"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for libcouchbase/couchbase.h" >&5
+$as_echo_n "checking for libcouchbase/couchbase.h... " >&6; }
+
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+ #include <libcouchbase/couchbase.h>
+int
+main ()
+{
+int a = 1;
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+ smart_include=" "
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ break
+
+else
+
+ smart_include=
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+
+if test "x$smart_include" = "x"; then
+
+ for try in $_smart_include_dir; do
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for libcouchbase/couchbase.h in $try" >&5
+$as_echo_n "checking for libcouchbase/couchbase.h in $try... " >&6; }
+ CPPFLAGS="-isystem $try $old_CPPFLAGS"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+ #include <libcouchbase/couchbase.h>
+int
+main ()
+{
+int a = 1;
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+ smart_include="-isystem $try"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ break
+
+else
+
+ smart_include=
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ done
+ CPPFLAGS="$old_CPPFLAGS"
+fi
+
+if test "x$smart_include" != "x"; then
+ eval "ac_cv_header_$ac_safe=yes"
+ CPPFLAGS="$smart_include $old_CPPFLAGS"
+ SMART_CPPFLAGS="$smart_include $SMART_CPPFLAGS"
+fi
+
+smart_prefix=
+
+ if test "x$ac_cv_header_libcouchbase_couchbase_h" != "xyes"; then
+ have_couchbase="no"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: libcouchbase headers not found. Use --with-libcouchbase-include-dir=<path>." >&5
+$as_echo "$as_me: WARNING: libcouchbase headers not found. Use --with-libcouchbase-include-dir=<path>." >&2;}
+ fi
+
+
+ smart_try_dir="$libcouchbase_lib_dir"
+
+
+sm_lib_safe=`echo "couchbase" | sed 'y%./+-%__p_%'`
+sm_func_safe=`echo "lcb_get_version" | sed 'y%./+-%__p_%'`
+
+old_LIBS="$LIBS"
+old_CPPFLAGS="$CPPFLAGS"
+smart_lib=
+smart_ldflags=
+smart_lib_dir=
+
+if test "x$smart_try_dir" != "x"; then
+ for try in $smart_try_dir; do
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for lcb_get_version in -lcouchbase in $try" >&5
+$as_echo_n "checking for lcb_get_version in -lcouchbase in $try... " >&6; }
+ LIBS="-lcouchbase $old_LIBS"
+ CPPFLAGS="-L$try -Wl,-rpath,$try $old_CPPFLAGS"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+extern char lcb_get_version();
+int
+main ()
+{
+lcb_get_version()
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+
+ smart_lib="-lcouchbase"
+ smart_ldflags="-L$try -Wl,-rpath,$try"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ break
+
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ done
+ LIBS="$old_LIBS"
+ CPPFLAGS="$old_CPPFLAGS"
+fi
+
+if test "x$smart_lib" = "x"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for lcb_get_version in -lcouchbase" >&5
+$as_echo_n "checking for lcb_get_version in -lcouchbase... " >&6; }
+ LIBS="-lcouchbase $old_LIBS"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+extern char lcb_get_version();
+int
+main ()
+{
+lcb_get_version()
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+
+ smart_lib="-lcouchbase"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ LIBS="$old_LIBS"
+fi
+
+if test "x$smart_lib" = "x"; then
+ for try in /usr/local/lib /opt/lib; do
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for lcb_get_version in -lcouchbase in $try" >&5
+$as_echo_n "checking for lcb_get_version in -lcouchbase in $try... " >&6; }
+ LIBS="-lcouchbase $old_LIBS"
+ CPPFLAGS="-L$try -Wl,-rpath,$try $old_CPPFLAGS"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+extern char lcb_get_version();
+int
+main ()
+{
+lcb_get_version()
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+
+ smart_lib="-lcouchbase"
+ smart_ldflags="-L$try -Wl,-rpath,$try"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ break
+
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ done
+ LIBS="$old_LIBS"
+ CPPFLAGS="$old_CPPFLAGS"
+fi
+
+if test "x$smart_lib" != "x"; then
+ eval "ac_cv_lib_${sm_lib_safe}_${sm_func_safe}=yes"
+ LIBS="$smart_ldflags $smart_lib $old_LIBS"
+ SMART_LIBS="$smart_ldflags $smart_lib $SMART_LIBS"
+fi
+
+ if test "x$ac_cv_lib_couchbase_lcb_get_version" != "xyes"; then
+ have_couchbase="no"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: libcouchbase libraries not found. Use --with-libcouchbase-lib-dir=<path>." >&5
+$as_echo "$as_me: WARNING: libcouchbase libraries not found. Use --with-libcouchbase-lib-dir=<path>." >&2;}
+ fi
+
+ if test x"$have_couchbase" != x"yes"; then
+ fail="$fail libcouchbase"
+ fi
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for OpenSSL support" >&5
+$as_echo_n "checking for OpenSSL support... " >&6; }
+ if test "x$OPENSSL_LIBS" != "x"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ fail="OpenSSL"
+ fi
+
+
+ targetname=rlm_couchbase
+else
+ targetname=
+ echo \*\*\* module rlm_couchbase is disabled.
+fi
+
+if test x"$fail" != x""; then
+ if test x"${enable_strict_dependencies}" = x"yes"; then
+ as_fn_error $? "set --without-rlm_couchbase to disable it explicitly." "$LINENO" 5
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: silently not building rlm_couchbase." >&5
+$as_echo "$as_me: WARNING: silently not building rlm_couchbase." >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: FAILURE: rlm_couchbase requires: $fail." >&5
+$as_echo "$as_me: WARNING: FAILURE: rlm_couchbase requires: $fail." >&2;};
+ targetname=""
+ fi
+fi
+
+mod_ldflags="${SMART_LIBS}"
+mod_cflags="${SMART_CPPFLAGS}"
+
+
+
+
+
+ac_config_files="$ac_config_files all.mk"
+
+cat >confcache <<\_ACEOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs, see configure's option --config-cache.
+# It is not useful on other systems. If it contains results you don't
+# want to keep, you may remove or edit it.
+#
+# config.status only pays attention to the cache file if you give it
+# the --recheck option to rerun configure.
+#
+# `ac_cv_env_foo' variables (set or unset) will be overridden when
+# loading this file, other *unset* `ac_cv_foo' will be assigned the
+# following values.
+
+_ACEOF
+
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, we kill variables containing newlines.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(
+ for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
+ eval ac_val=\$$ac_var
+ case $ac_val in #(
+ *${as_nl}*)
+ case $ac_var in #(
+ *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+ esac
+ case $ac_var in #(
+ _ | IFS | as_nl) ;; #(
+ BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+ *) { eval $ac_var=; unset $ac_var;} ;;
+ esac ;;
+ esac
+ done
+
+ (set) 2>&1 |
+ case $as_nl`(ac_space=' '; set) 2>&1` in #(
+ *${as_nl}ac_space=\ *)
+ # `set' does not quote correctly, so add quotes: double-quote
+ # substitution turns \\\\ into \\, and sed turns \\ into \.
+ sed -n \
+ "s/'/'\\\\''/g;
+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
+ ;; #(
+ *)
+ # `set' quotes correctly as required by POSIX, so do not add quotes.
+ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+ ;;
+ esac |
+ sort
+) |
+ sed '
+ /^ac_cv_env_/b end
+ t clear
+ :clear
+ s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
+ t end
+ s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
+ :end' >>confcache
+if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
+ if test -w "$cache_file"; then
+ if test "x$cache_file" != "x/dev/null"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5
+$as_echo "$as_me: updating cache $cache_file" >&6;}
+ if test ! -f "$cache_file" || test -h "$cache_file"; then
+ cat confcache >"$cache_file"
+ else
+ case $cache_file in #(
+ */* | ?:*)
+ mv -f confcache "$cache_file"$$ &&
+ mv -f "$cache_file"$$ "$cache_file" ;; #(
+ *)
+ mv -f confcache "$cache_file" ;;
+ esac
+ fi
+ fi
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5
+$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
+ fi
+fi
+rm -f confcache
+
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+# Let make expand exec_prefix.
+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+DEFS=-DHAVE_CONFIG_H
+
+ac_libobjs=
+ac_ltlibobjs=
+U=
+for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
+ # 1. Remove the extension, and $U if already installed.
+ ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
+ ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
+ # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR
+ # will be set to the directory where LIBOBJS objects are built.
+ as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext"
+ as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo'
+done
+LIBOBJS=$ac_libobjs
+
+LTLIBOBJS=$ac_ltlibobjs
+
+
+
+: "${CONFIG_STATUS=./config.status}"
+ac_write_fail=0
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files $CONFIG_STATUS"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5
+$as_echo "$as_me: creating $CONFIG_STATUS" >&6;}
+as_write_fail=0
+cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1
+#! $SHELL
+# Generated by $as_me.
+# Run this file to recreate the current configuration.
+# Compiler output produced by configure, useful for debugging
+# configure, is in config.log if it exists.
+
+debug=false
+ac_cs_recheck=false
+ac_cs_silent=false
+
+SHELL=\${CONFIG_SHELL-$SHELL}
+export SHELL
+_ASEOF
+cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+ emulate sh
+ NULLCMD=:
+ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+ setopt NO_GLOB_SUBST
+else
+ case `(set -o) 2>/dev/null` in #(
+ *posix*) :
+ set -o posix ;; #(
+ *) :
+ ;;
+esac
+fi
+
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+ as_echo='print -r --'
+ as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+ as_echo='printf %s\n'
+ as_echo_n='printf %s'
+else
+ if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+ as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+ as_echo_n='/usr/ucb/echo -n'
+ else
+ as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+ as_echo_n_body='eval
+ arg=$1;
+ case $arg in #(
+ *"$as_nl"*)
+ expr "X$arg" : "X\\(.*\\)$as_nl";
+ arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+ esac;
+ expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+ '
+ export as_echo_n_body
+ as_echo_n='sh -c $as_echo_n_body as_echo'
+ fi
+ export as_echo_body
+ as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ PATH_SEPARATOR=:
+ (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+ (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+ PATH_SEPARATOR=';'
+ }
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order. Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" "" $as_nl"
+
+# Find who we are. Look in the path if we contain no directory separator.
+as_myself=
+case $0 in #((
+ *[\\/]* ) as_myself=$0 ;;
+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+ as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+ $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+ exit 1
+fi
+
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there. '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with STATUS, using 1 if that was 0.
+as_fn_error ()
+{
+ as_status=$1; test $as_status -eq 0 && as_status=1
+ if test "$4"; then
+ as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
+ fi
+ $as_echo "$as_me: error: $2" >&2
+ as_fn_exit $as_status
+} # as_fn_error
+
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+ return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+ set +e
+ as_fn_set_status $1
+ exit $1
+} # as_fn_exit
+
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+ { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+ eval 'as_fn_append ()
+ {
+ eval $1+=\$2
+ }'
+else
+ as_fn_append ()
+ {
+ eval $1=\$$1\$2
+ }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+ eval 'as_fn_arith ()
+ {
+ as_val=$(( $* ))
+ }'
+else
+ as_fn_arith ()
+ {
+ as_val=`expr "$@" || test $? -eq 1`
+ }
+fi # as_fn_arith
+
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+ as_basename=basename
+else
+ as_basename=false
+fi
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+ as_dirname=dirname
+else
+ as_dirname=false
+fi
+
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+ X"$0" : 'X\(//\)$' \| \
+ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+ sed '/^.*\/\([^/][^/]*\)\/*$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+ case `echo 'xy\c'` in
+ *c*) ECHO_T=' ';; # ECHO_T is single tab character.
+ xy) ECHO_C='\c';;
+ *) echo `echo ksh88 bug on AIX 6.1` > /dev/null
+ ECHO_T=' ';;
+ esac;;
+*)
+ ECHO_N='-n';;
+esac
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+ rm -f conf$$.dir/conf$$.file
+else
+ rm -f conf$$.dir
+ mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+ if ln -s conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s='ln -s'
+ # ... but there are two gotchas:
+ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+ # In both cases, we have to default to `cp -pR'.
+ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+ as_ln_s='cp -pR'
+ elif ln conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s=ln
+ else
+ as_ln_s='cp -pR'
+ fi
+else
+ as_ln_s='cp -pR'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+ case $as_dir in #(
+ -*) as_dir=./$as_dir;;
+ esac
+ test -d "$as_dir" || eval $as_mkdir_p || {
+ as_dirs=
+ while :; do
+ case $as_dir in #(
+ *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+ *) as_qdir=$as_dir;;
+ esac
+ as_dirs="'$as_qdir' $as_dirs"
+ as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_dir" : 'X\(//\)[^/]' \| \
+ X"$as_dir" : 'X\(//\)$' \| \
+ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ test -d "$as_dir" && break
+ done
+ test -z "$as_dirs" || eval "mkdir $as_dirs"
+ } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+if mkdir -p . 2>/dev/null; then
+ as_mkdir_p='mkdir -p "$as_dir"'
+else
+ test -d ./-p && rmdir ./-p
+ as_mkdir_p=false
+fi
+
+
+# as_fn_executable_p FILE
+# -----------------------
+# Test if FILE is an executable regular file.
+as_fn_executable_p ()
+{
+ test -f "$1" && test -x "$1"
+} # as_fn_executable_p
+as_test_x='test -x'
+as_executable_p=as_fn_executable_p
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+exec 6>&1
+## ----------------------------------- ##
+## Main body of $CONFIG_STATUS script. ##
+## ----------------------------------- ##
+_ASEOF
+test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# Save the log message, to keep $0 and so on meaningful, and to
+# report actual input values of CONFIG_FILES etc. instead of their
+# values after options handling.
+ac_log="
+This file was extended by $as_me, which was
+generated by GNU Autoconf 2.69. Invocation command line was
+
+ CONFIG_FILES = $CONFIG_FILES
+ CONFIG_HEADERS = $CONFIG_HEADERS
+ CONFIG_LINKS = $CONFIG_LINKS
+ CONFIG_COMMANDS = $CONFIG_COMMANDS
+ $ $0 $@
+
+on `(hostname || uname -n) 2>/dev/null | sed 1q`
+"
+
+_ACEOF
+
+case $ac_config_files in *"
+"*) set x $ac_config_files; shift; ac_config_files=$*;;
+esac
+
+case $ac_config_headers in *"
+"*) set x $ac_config_headers; shift; ac_config_headers=$*;;
+esac
+
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+# Files that config.status was made for.
+config_files="$ac_config_files"
+config_headers="$ac_config_headers"
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+ac_cs_usage="\
+\`$as_me' instantiates files and other configuration actions
+from templates according to the current configuration. Unless the files
+and actions are specified as TAGs, all are instantiated by default.
+
+Usage: $0 [OPTION]... [TAG]...
+
+ -h, --help print this help, then exit
+ -V, --version print version number and configuration settings, then exit
+ --config print configuration, then exit
+ -q, --quiet, --silent
+ do not print progress messages
+ -d, --debug don't remove temporary files
+ --recheck update $as_me by reconfiguring in the same conditions
+ --file=FILE[:TEMPLATE]
+ instantiate the configuration file FILE
+ --header=FILE[:TEMPLATE]
+ instantiate the configuration header FILE
+
+Configuration files:
+$config_files
+
+Configuration headers:
+$config_headers
+
+Report bugs to the package provider."
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
+ac_cs_version="\\
+config.status
+configured by $0, generated by GNU Autoconf 2.69,
+ with options \\"\$ac_cs_config\\"
+
+Copyright (C) 2012 Free Software Foundation, Inc.
+This config.status script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it."
+
+ac_pwd='$ac_pwd'
+srcdir='$srcdir'
+test -n "\$AWK" || AWK=awk
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# The default lists apply if the user does not specify any file.
+ac_need_defaults=:
+while test $# != 0
+do
+ case $1 in
+ --*=?*)
+ ac_option=`expr "X$1" : 'X\([^=]*\)='`
+ ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
+ ac_shift=:
+ ;;
+ --*=)
+ ac_option=`expr "X$1" : 'X\([^=]*\)='`
+ ac_optarg=
+ ac_shift=:
+ ;;
+ *)
+ ac_option=$1
+ ac_optarg=$2
+ ac_shift=shift
+ ;;
+ esac
+
+ case $ac_option in
+ # Handling of the options.
+ -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+ ac_cs_recheck=: ;;
+ --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
+ $as_echo "$ac_cs_version"; exit ;;
+ --config | --confi | --conf | --con | --co | --c )
+ $as_echo "$ac_cs_config"; exit ;;
+ --debug | --debu | --deb | --de | --d | -d )
+ debug=: ;;
+ --file | --fil | --fi | --f )
+ $ac_shift
+ case $ac_optarg in
+ *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+ '') as_fn_error $? "missing file argument" ;;
+ esac
+ as_fn_append CONFIG_FILES " '$ac_optarg'"
+ ac_need_defaults=false;;
+ --header | --heade | --head | --hea )
+ $ac_shift
+ case $ac_optarg in
+ *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+ esac
+ as_fn_append CONFIG_HEADERS " '$ac_optarg'"
+ ac_need_defaults=false;;
+ --he | --h)
+ # Conflict between --help and --header
+ as_fn_error $? "ambiguous option: \`$1'
+Try \`$0 --help' for more information.";;
+ --help | --hel | -h )
+ $as_echo "$ac_cs_usage"; exit ;;
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil | --si | --s)
+ ac_cs_silent=: ;;
+
+ # This is an error.
+ -*) as_fn_error $? "unrecognized option: \`$1'
+Try \`$0 --help' for more information." ;;
+
+ *) as_fn_append ac_config_targets " $1"
+ ac_need_defaults=false ;;
+
+ esac
+ shift
+done
+
+ac_configure_extra_args=
+
+if $ac_cs_silent; then
+ exec 6>/dev/null
+ ac_configure_extra_args="$ac_configure_extra_args --silent"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+if \$ac_cs_recheck; then
+ set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+ shift
+ \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
+ CONFIG_SHELL='$SHELL'
+ export CONFIG_SHELL
+ exec "\$@"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+exec 5>>config.log
+{
+ echo
+ sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
+## Running $as_me. ##
+_ASBOX
+ $as_echo "$ac_log"
+} >&5
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+
+# Handling of arguments.
+for ac_config_target in $ac_config_targets
+do
+ case $ac_config_target in
+ "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;;
+ "all.mk") CONFIG_FILES="$CONFIG_FILES all.mk" ;;
+
+ *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
+ esac
+done
+
+
+# If the user did not use the arguments to specify the items to instantiate,
+# then the envvar interface is used. Set only those that are not.
+# We use the long form for the default assignment because of an extremely
+# bizarre bug on SunOS 4.1.3.
+if $ac_need_defaults; then
+ test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
+ test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
+fi
+
+# Have a temporary directory for convenience. Make it in the build tree
+# simply because there is no reason against having it here, and in addition,
+# creating and moving files from /tmp can sometimes cause problems.
+# Hook for its removal unless debugging.
+# Note that there is a small window in which the directory will not be cleaned:
+# after its creation but before its name has been assigned to `$tmp'.
+$debug ||
+{
+ tmp= ac_tmp=
+ trap 'exit_status=$?
+ : "${ac_tmp:=$tmp}"
+ { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status
+' 0
+ trap 'as_fn_exit 1' 1 2 13 15
+}
+# Create a (secure) tmp directory for tmp files.
+
+{
+ tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
+ test -d "$tmp"
+} ||
+{
+ tmp=./conf$$-$RANDOM
+ (umask 077 && mkdir "$tmp")
+} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5
+ac_tmp=$tmp
+
+# Set up the scripts for CONFIG_FILES section.
+# No need to generate them if there are no CONFIG_FILES.
+# This happens for instance with `./config.status config.h'.
+if test -n "$CONFIG_FILES"; then
+
+
+ac_cr=`echo X | tr X '\015'`
+# On cygwin, bash can eat \r inside `` if the user requested igncr.
+# But we know of no other shell where ac_cr would be empty at this
+# point, so we can use a bashism as a fallback.
+if test "x$ac_cr" = x; then
+ eval ac_cr=\$\'\\r\'
+fi
+ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
+if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
+ ac_cs_awk_cr='\\r'
+else
+ ac_cs_awk_cr=$ac_cr
+fi
+
+echo 'BEGIN {' >"$ac_tmp/subs1.awk" &&
+_ACEOF
+
+
+{
+ echo "cat >conf$$subs.awk <<_ACEOF" &&
+ echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
+ echo "_ACEOF"
+} >conf$$subs.sh ||
+ as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'`
+ac_delim='%!_!# '
+for ac_last_try in false false false false false :; do
+ . ./conf$$subs.sh ||
+ as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+
+ ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
+ if test $ac_delim_n = $ac_delim_num; then
+ break
+ elif $ac_last_try; then
+ as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+ else
+ ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+ fi
+done
+rm -f conf$$subs.sh
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK &&
+_ACEOF
+sed -n '
+h
+s/^/S["/; s/!.*/"]=/
+p
+g
+s/^[^!]*!//
+:repl
+t repl
+s/'"$ac_delim"'$//
+t delim
+:nl
+h
+s/\(.\{148\}\)..*/\1/
+t more1
+s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
+p
+n
+b repl
+:more1
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t nl
+:delim
+h
+s/\(.\{148\}\)..*/\1/
+t more2
+s/["\\]/\\&/g; s/^/"/; s/$/"/
+p
+b
+:more2
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t delim
+' <conf$$subs.awk | sed '
+/^[^""]/{
+ N
+ s/\n//
+}
+' >>$CONFIG_STATUS || ac_write_fail=1
+rm -f conf$$subs.awk
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+_ACAWK
+cat >>"\$ac_tmp/subs1.awk" <<_ACAWK &&
+ for (key in S) S_is_set[key] = 1
+ FS = ""
+
+}
+{
+ line = $ 0
+ nfields = split(line, field, "@")
+ substed = 0
+ len = length(field[1])
+ for (i = 2; i < nfields; i++) {
+ key = field[i]
+ keylen = length(key)
+ if (S_is_set[key]) {
+ value = S[key]
+ line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
+ len += length(value) + length(field[++i])
+ substed = 1
+ } else
+ len += 1 + keylen
+ }
+
+ print line
+}
+
+_ACAWK
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
+ sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
+else
+ cat
+fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \
+ || as_fn_error $? "could not setup config files machinery" "$LINENO" 5
+_ACEOF
+
+# VPATH may cause trouble with some makes, so we remove sole $(srcdir),
+# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and
+# trailing colons and then remove the whole line if VPATH becomes empty
+# (actually we leave an empty line to preserve line numbers).
+if test "x$srcdir" = x.; then
+ ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{
+h
+s///
+s/^/:/
+s/[ ]*$/:/
+s/:\$(srcdir):/:/g
+s/:\${srcdir}:/:/g
+s/:@srcdir@:/:/g
+s/^:*//
+s/:*$//
+x
+s/\(=[ ]*\).*/\1/
+G
+s/\n//
+s/^[^=]*=[ ]*$//
+}'
+fi
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+fi # test -n "$CONFIG_FILES"
+
+# Set up the scripts for CONFIG_HEADERS section.
+# No need to generate them if there are no CONFIG_HEADERS.
+# This happens for instance with `./config.status Makefile'.
+if test -n "$CONFIG_HEADERS"; then
+cat >"$ac_tmp/defines.awk" <<\_ACAWK ||
+BEGIN {
+_ACEOF
+
+# Transform confdefs.h into an awk script `defines.awk', embedded as
+# here-document in config.status, that substitutes the proper values into
+# config.h.in to produce config.h.
+
+# Create a delimiter string that does not exist in confdefs.h, to ease
+# handling of long lines.
+ac_delim='%!_!# '
+for ac_last_try in false false :; do
+ ac_tt=`sed -n "/$ac_delim/p" confdefs.h`
+ if test -z "$ac_tt"; then
+ break
+ elif $ac_last_try; then
+ as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5
+ else
+ ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+ fi
+done
+
+# For the awk script, D is an array of macro values keyed by name,
+# likewise P contains macro parameters if any. Preserve backslash
+# newline sequences.
+
+ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]*
+sed -n '
+s/.\{148\}/&'"$ac_delim"'/g
+t rset
+:rset
+s/^[ ]*#[ ]*define[ ][ ]*/ /
+t def
+d
+:def
+s/\\$//
+t bsnl
+s/["\\]/\\&/g
+s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\
+D["\1"]=" \3"/p
+s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p
+d
+:bsnl
+s/["\\]/\\&/g
+s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\
+D["\1"]=" \3\\\\\\n"\\/p
+t cont
+s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p
+t cont
+d
+:cont
+n
+s/.\{148\}/&'"$ac_delim"'/g
+t clear
+:clear
+s/\\$//
+t bsnlc
+s/["\\]/\\&/g; s/^/"/; s/$/"/p
+d
+:bsnlc
+s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p
+b cont
+' <confdefs.h | sed '
+s/'"$ac_delim"'/"\\\
+"/g' >>$CONFIG_STATUS || ac_write_fail=1
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ for (key in D) D_is_set[key] = 1
+ FS = ""
+}
+/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ {
+ line = \$ 0
+ split(line, arg, " ")
+ if (arg[1] == "#") {
+ defundef = arg[2]
+ mac1 = arg[3]
+ } else {
+ defundef = substr(arg[1], 2)
+ mac1 = arg[2]
+ }
+ split(mac1, mac2, "(") #)
+ macro = mac2[1]
+ prefix = substr(line, 1, index(line, defundef) - 1)
+ if (D_is_set[macro]) {
+ # Preserve the white space surrounding the "#".
+ print prefix "define", macro P[macro] D[macro]
+ next
+ } else {
+ # Replace #undef with comments. This is necessary, for example,
+ # in the case of _POSIX_SOURCE, which is predefined and required
+ # on some systems where configure will not decide to define it.
+ if (defundef == "undef") {
+ print "/*", prefix defundef, macro, "*/"
+ next
+ }
+ }
+}
+{ print }
+_ACAWK
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+ as_fn_error $? "could not setup config headers machinery" "$LINENO" 5
+fi # test -n "$CONFIG_HEADERS"
+
+
+eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS "
+shift
+for ac_tag
+do
+ case $ac_tag in
+ :[FHLC]) ac_mode=$ac_tag; continue;;
+ esac
+ case $ac_mode$ac_tag in
+ :[FHL]*:*);;
+ :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;;
+ :[FH]-) ac_tag=-:-;;
+ :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
+ esac
+ ac_save_IFS=$IFS
+ IFS=:
+ set x $ac_tag
+ IFS=$ac_save_IFS
+ shift
+ ac_file=$1
+ shift
+
+ case $ac_mode in
+ :L) ac_source=$1;;
+ :[FH])
+ ac_file_inputs=
+ for ac_f
+ do
+ case $ac_f in
+ -) ac_f="$ac_tmp/stdin";;
+ *) # Look for the file first in the build tree, then in the source tree
+ # (if the path is not absolute). The absolute path cannot be DOS-style,
+ # because $ac_f cannot contain `:'.
+ test -f "$ac_f" ||
+ case $ac_f in
+ [\\/$]*) false;;
+ *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
+ esac ||
+ as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;;
+ esac
+ case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
+ as_fn_append ac_file_inputs " '$ac_f'"
+ done
+
+ # Let's still pretend it is `configure' which instantiates (i.e., don't
+ # use $as_me), people would be surprised to read:
+ # /* config.h. Generated by config.status. */
+ configure_input='Generated from '`
+ $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
+ `' by configure.'
+ if test x"$ac_file" != x-; then
+ configure_input="$ac_file. $configure_input"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5
+$as_echo "$as_me: creating $ac_file" >&6;}
+ fi
+ # Neutralize special characters interpreted by sed in replacement strings.
+ case $configure_input in #(
+ *\&* | *\|* | *\\* )
+ ac_sed_conf_input=`$as_echo "$configure_input" |
+ sed 's/[\\\\&|]/\\\\&/g'`;; #(
+ *) ac_sed_conf_input=$configure_input;;
+ esac
+
+ case $ac_tag in
+ *:-:* | *:-) cat >"$ac_tmp/stdin" \
+ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;;
+ esac
+ ;;
+ esac
+
+ ac_dir=`$as_dirname -- "$ac_file" ||
+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$ac_file" : 'X\(//\)[^/]' \| \
+ X"$ac_file" : 'X\(//\)$' \| \
+ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$ac_file" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ as_dir="$ac_dir"; as_fn_mkdir_p
+ ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+ ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+ # A ".." for each directory in $ac_dir_suffix.
+ ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+ case $ac_top_builddir_sub in
+ "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+ esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+ .) # We are building in place.
+ ac_srcdir=.
+ ac_top_srcdir=$ac_top_builddir_sub
+ ac_abs_top_srcdir=$ac_pwd ;;
+ [\\/]* | ?:[\\/]* ) # Absolute name.
+ ac_srcdir=$srcdir$ac_dir_suffix;
+ ac_top_srcdir=$srcdir
+ ac_abs_top_srcdir=$srcdir ;;
+ *) # Relative name.
+ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+ ac_top_srcdir=$ac_top_build_prefix$srcdir
+ ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+
+ case $ac_mode in
+ :F)
+ #
+ # CONFIG_FILE
+ #
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# If the template does not know about datarootdir, expand it.
+# FIXME: This hack should be removed a few years after 2.60.
+ac_datarootdir_hack=; ac_datarootdir_seen=
+ac_sed_dataroot='
+/datarootdir/ {
+ p
+ q
+}
+/@datadir@/p
+/@docdir@/p
+/@infodir@/p
+/@localedir@/p
+/@mandir@/p'
+case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
+*datarootdir*) ac_datarootdir_seen=yes;;
+*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
+$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ ac_datarootdir_hack='
+ s&@datadir@&$datadir&g
+ s&@docdir@&$docdir&g
+ s&@infodir@&$infodir&g
+ s&@localedir@&$localedir&g
+ s&@mandir@&$mandir&g
+ s&\\\${datarootdir}&$datarootdir&g' ;;
+esac
+_ACEOF
+
+# Neutralize VPATH when `$srcdir' = `.'.
+# Shell code in configure.ac might set extrasub.
+# FIXME: do we really want to maintain this feature?
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_sed_extra="$ac_vpsub
+$extrasub
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+:t
+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
+s|@configure_input@|$ac_sed_conf_input|;t t
+s&@top_builddir@&$ac_top_builddir_sub&;t t
+s&@top_build_prefix@&$ac_top_build_prefix&;t t
+s&@srcdir@&$ac_srcdir&;t t
+s&@abs_srcdir@&$ac_abs_srcdir&;t t
+s&@top_srcdir@&$ac_top_srcdir&;t t
+s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
+s&@builddir@&$ac_builddir&;t t
+s&@abs_builddir@&$ac_abs_builddir&;t t
+s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
+$ac_datarootdir_hack
+"
+eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \
+ >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+
+test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
+ { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } &&
+ { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \
+ "$ac_tmp/out"`; test -z "$ac_out"; } &&
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined. Please make sure it is defined" >&5
+$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined. Please make sure it is defined" >&2;}
+
+ rm -f "$ac_tmp/stdin"
+ case $ac_file in
+ -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";;
+ *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";;
+ esac \
+ || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+ ;;
+ :H)
+ #
+ # CONFIG_HEADER
+ #
+ if test x"$ac_file" != x-; then
+ {
+ $as_echo "/* $configure_input */" \
+ && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs"
+ } >"$ac_tmp/config.h" \
+ || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+ if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5
+$as_echo "$as_me: $ac_file is unchanged" >&6;}
+ else
+ rm -f "$ac_file"
+ mv "$ac_tmp/config.h" "$ac_file" \
+ || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+ fi
+ else
+ $as_echo "/* $configure_input */" \
+ && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \
+ || as_fn_error $? "could not create -" "$LINENO" 5
+ fi
+ ;;
+
+
+ esac
+
+done # for ac_tag
+
+
+as_fn_exit 0
+_ACEOF
+ac_clean_files=$ac_clean_files_save
+
+test $ac_write_fail = 0 ||
+ as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5
+
+
+# configure is writing to config.log, and then calls config.status.
+# config.status does its own redirection, appending to config.log.
+# Unfortunately, on DOS this fails, as config.log is still kept open
+# by configure, so config.status won't be able to write to it; its
+# output is simply discarded. So we exec the FD to /dev/null,
+# effectively closing config.log, so it can be properly (re)opened and
+# appended to by config.status. When coming back to configure, we
+# need to make the FD available again.
+if test "$no_create" != yes; then
+ ac_cs_success=:
+ ac_config_status_args=
+ test "$silent" = yes &&
+ ac_config_status_args="$ac_config_status_args --quiet"
+ exec 5>/dev/null
+ $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
+ exec 5>>config.log
+ # Use ||, not &&, to avoid exiting from the if with $? = 1, which
+ # would make configure fail if this is the last instruction.
+ $ac_cs_success || as_fn_exit 1
+fi
+if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
+$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
+fi
+
diff --git a/src/modules/rlm_couchbase/configure.ac b/src/modules/rlm_couchbase/configure.ac
new file mode 100644
index 0000000..ce39f34
--- /dev/null
+++ b/src/modules/rlm_couchbase/configure.ac
@@ -0,0 +1,242 @@
+AC_PREREQ([2.68])
+AC_INIT(rlm_couchbase.c)
+AC_REVISION($Revision$)
+FR_INIT_MODULE([rlm_couchbase])
+AC_CONFIG_HEADER(config.h)
+
+if test x$with_[]modname != xno; then
+
+ AC_PROG_CC
+ AC_PROG_CPP
+
+ dnl put configuration checks here.
+ dnl set $fail to what's missing, on fatal errors.
+ dnl use AC_MSG_WARN() on important messages.
+
+ dnl ############################################################
+ dnl # Check for json-c
+ dnl ############################################################
+
+ dnl extra argument: --with-jsonc-include-dir=DIR
+ jsonc_include_dir=
+ AC_ARG_WITH(jsonc-include-dir,
+ [AS_HELP_STRING([--with-jsonc-include-dir=DIR],
+ [Directory where the json-c includes may be found])],
+ [case "$withval" in
+ no)
+ AC_MSG_ERROR(Need jsonc-include-dir)
+ ;;
+ yes)
+ ;;
+ *)
+ jsonc_include_dir="$withval"
+ ;;
+ esac])
+
+ dnl extra argument: --with-jsonc-lib-dir=DIR
+ jsonc_lib_dir=
+ AC_ARG_WITH(jsonc-lib-dir,
+ [AS_HELP_STRING([--with-jsonc-lib-dir=DIR],
+ [Directory where the json-c libraries may be found])],
+ [case "$withval" in
+ no)
+ AC_MSG_ERROR(Need jsonc-lib-dir)
+ ;;
+ yes)
+ ;;
+ *)
+ jsonc_lib_dir="$withval"
+ ;;
+ esac])
+
+ dnl extra argument: --with-jsonc-dir=DIR
+ AC_ARG_WITH(jsonc-dir,
+ [AS_HELP_STRING([--with-jsonc-dir=DIR],
+ [Base directory where json-c is installed])],
+ [case "$withval" in
+ no)
+ AC_MSG_ERROR(Need json-c-dir)
+ ;;
+ yes)
+ ;;
+ *)
+ jsonc_lib_dir="$withval/lib"
+ jsonc_include_dir="$withval/include"
+ ;;
+ esac])
+
+ dnl ############################################################
+ dnl # Check for json-c header files
+ dnl ############################################################
+
+ have_json="yes"
+ smart_try_dir="$jsonc_include_dir"
+ FR_SMART_CHECK_INCLUDE([json/json.h])
+ if test "x$ac_cv_header_json_json_h" != "xyes"; then
+ FR_SMART_CHECK_INCLUDE([json-c/json.h])
+ if test "x$ac_cv_header_jsonmc_json_h" != "xyes"; then
+ have_json="no"
+ AC_MSG_WARN([json-c headers not found. Use --with-jsonc-include-dir=<path>.])
+ fail="$fail json.h"
+ else
+ AC_DEFINE([HAVE_JSONMC_JSON_H],[1],[json.h is at json-c/json.h relative to include dir])
+ fi
+ else
+ AC_DEFINE([HAVE_JSON_JSON_H],[1],[json.h is at json/json.h relative to include dir])
+ fi
+
+ dnl ############################################################
+ dnl # Check for json-c libraries
+ dnl ############################################################
+
+ smart_try_dir="$jsonc_lib_dir"
+ dnl # Use a json-c specific function which is only
+ dnl # available in newer versions.
+ FR_SMART_CHECK_LIB([json-c], [json_c_version])
+ if test "x$ac_cv_lib_json_c_json_c_version" != "xyes"; then
+ dnl # Use a function which is included in legacy versions
+ dnl # but which may be available in other json libraries
+ FR_SMART_CHECK_LIB([json], [json_tokener_new])
+ if test "x$ac_cv_lib_json_json_tokener_new" != "xyes"; then
+ have_json="no"
+ AC_MSG_WARN([json-c libraries not found. Use --with-jsonc-lib-dir=<path>.])
+ fi
+ fi
+
+ if test "x$have_json" = "xyes"; then
+ dnl # Ensure we use the library we just found the rest of the checks
+ LDFLAGS="$SMART_LIBS"
+
+ dnl # Add any optional functions here
+ AC_CHECK_FUNCS(\
+ json_c_version \
+ json_object_get_string_len \
+ json_object_object_get_ex \
+ json_object_new_int64 \
+ json_tokener_error_desc \
+ json_tokener_get_error
+ )
+ else
+ fail="$fail json-c"
+ fi
+
+ dnl ############################################################
+ dnl # Check for libcouchbase
+ dnl ############################################################
+
+ dnl extra argument: --with-libcouchbase-include-dir=DIR
+ libcouchbase_include_dir=
+ AC_ARG_WITH(libcouchbase-include-dir,
+ [AS_HELP_STRING([--with-libcouchbase-include-dir=DIR],
+ [Directory where the libcouchbase includes may be found])],
+ [case "$withval" in
+ no)
+ AC_MSG_ERROR(Need libcouchbase-include-dir)
+ ;;
+ yes)
+ ;;
+ *)
+ libcouchbase_include_dir="$withval"
+ ;;
+ esac])
+
+ dnl extra argument: --with-libcouchbase-lib-dir=DIR
+ libcouchbase_lib_dir=
+ AC_ARG_WITH(libcouchbase-lib-dir,
+ [AS_HELP_STRING([--with-libcouchbase-lib-dir=DIR],
+ [Directory where the libcouchbase libraries may be found])],
+ [case "$withval" in
+ no)
+ AC_MSG_ERROR(Need libcouchbase-lib-dir)
+ ;;
+ yes)
+ ;;
+ *)
+ libcouchbase_lib_dir="$withval"
+ ;;
+ esac])
+
+ dnl extra argument: --with-libcouchbase-dir=DIR
+ AC_ARG_WITH(libcouchbase-dir,
+ [AS_HELP_STRING([--with-libcouchbase-dir=DIR],
+ [Base directory where libcouchbase is installed])],
+ [case "$withval" in
+ no)
+ AC_MSG_ERROR(Need libcouchbase-dir)
+ ;;
+ yes)
+ ;;
+ *)
+ libcouchbase_lib_dir="$withval/lib"
+ libcouchbase_include_dir="$withval/include"
+ ;;
+ esac])
+
+ dnl ############################################################
+ dnl # Check for libcouchbase header files
+ dnl ############################################################
+
+ have_couchbase="yes"
+ smart_try_dir="$libcouchbase_include_dir"
+ FR_SMART_CHECK_INCLUDE([libcouchbase/couchbase.h])
+ if test "x$ac_cv_header_libcouchbase_couchbase_h" != "xyes"; then
+ have_couchbase="no"
+ AC_MSG_WARN([libcouchbase headers not found. Use --with-libcouchbase-include-dir=<path>.])
+ fi
+
+ dnl ############################################################
+ dnl # Check for libcouchbase libraries
+ dnl ############################################################
+
+ smart_try_dir="$libcouchbase_lib_dir"
+ FR_SMART_CHECK_LIB([couchbase], [lcb_get_version])
+ if test "x$ac_cv_lib_couchbase_lcb_get_version" != "xyes"; then
+ have_couchbase="no"
+ AC_MSG_WARN([libcouchbase libraries not found. Use --with-libcouchbase-lib-dir=<path>.])
+ fi
+
+ if test x"$have_couchbase" != x"yes"; then
+ fail="$fail libcouchbase"
+ fi
+
+ dnl ############################################################
+ dnl # Check for OpenSSL
+ dnl ############################################################
+
+ AC_MSG_CHECKING(for OpenSSL support)
+ if test "x$OPENSSL_LIBS" != "x"; then
+ AC_MSG_RESULT(yes)
+ else
+ AC_MSG_RESULT(no)
+ fail="OpenSSL"
+ fi
+
+ dnl ############################################################
+ dnl # Checks done - set targetname
+ dnl ############################################################
+
+ targetname=modname
+else
+ targetname=
+ echo \*\*\* module modname is disabled.
+fi
+
+dnl Don't change this section.
+if test x"$fail" != x""; then
+ if test x"${enable_strict_dependencies}" = x"yes"; then
+ AC_MSG_ERROR([set --without-]modname[ to disable it explicitly.])
+ else
+ AC_MSG_WARN([silently not building ]modname[.])
+ AC_MSG_WARN([FAILURE: ]modname[ requires: $fail.]);
+ targetname=""
+ fi
+fi
+
+mod_ldflags="${SMART_LIBS}"
+mod_cflags="${SMART_CPPFLAGS}"
+
+AC_SUBST(mod_cflags)
+AC_SUBST(mod_ldflags)
+
+AC_SUBST(targetname)
+AC_OUTPUT(all.mk)
diff --git a/src/modules/rlm_couchbase/couchbase.c b/src/modules/rlm_couchbase/couchbase.c
new file mode 100644
index 0000000..ab2d9d0
--- /dev/null
+++ b/src/modules/rlm_couchbase/couchbase.c
@@ -0,0 +1,412 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA
+ */
+
+/**
+ * $Id$
+ *
+ * @brief Wrapper functions around the libcouchbase Couchbase client driver.
+ * @file couchbase.c
+ *
+ * @author Aaron Hurt <ahurt@anbcs.com>
+ * @copyright 2013-2014 The FreeRADIUS Server Project.
+ */
+
+RCSID("$Id$")
+
+#include <freeradius-devel/radiusd.h>
+
+#include "couchbase.h"
+#include "jsonc_missing.h"
+
+/** Couchbase callback for cluster statistics requests
+ *
+ * @param instance Couchbase connection instance.
+ * @param cookie Couchbase cookie for returning information from callbacks.
+ * @param error Couchbase error object.
+ * @param resp Couchbase statistics response object.
+ */
+void couchbase_stat_callback(lcb_t instance, const void *cookie, lcb_error_t error, const lcb_server_stat_resp_t *resp)
+{
+ if (error != LCB_SUCCESS) {
+ /* log error */
+ ERROR("rlm_couchbase: (stats_callback) %s (0x%x)", lcb_strerror(instance, error), error);
+ }
+ /* silent compiler */
+ (void)cookie;
+ (void)resp;
+}
+
+/** Couchbase callback for store (write) operations
+ *
+ * @param instance Couchbase connection instance.
+ * @param cookie Couchbase cookie for returning information from callbacks.
+ * @param operation Couchbase storage operation object.
+ * @param error Couchbase error object.
+ * @param resp Couchbase store operation response object.
+ */
+void couchbase_store_callback(lcb_t instance, const void *cookie, lcb_storage_t operation,
+ lcb_error_t error, const lcb_store_resp_t *resp)
+{
+ if (error != LCB_SUCCESS) {
+ /* log error */
+ ERROR("rlm_couchbase: (store_callback) %s (0x%x)", lcb_strerror(instance, error), error);
+ }
+ /* silent compiler */
+ (void)cookie;
+ (void)operation;
+ (void)resp;
+}
+
+/** Couchbase callback for get (read) operations
+ *
+ * @param instance Couchbase connection instance.
+ * @param cookie Couchbase cookie for returning information from callbacks.
+ * @param error Couchbase error object.
+ * @param resp Couchbase get operation response object.
+ */
+void couchbase_get_callback(lcb_t instance, const void *cookie, lcb_error_t error, const lcb_get_resp_t *resp)
+{
+ cookie_u cu; /* union of const and non const pointers */
+ cu.cdata = cookie; /* set const union member to cookie passed from couchbase */
+ cookie_t *c = (cookie_t *) cu.data; /* set our cookie struct using non-const member */
+ const char *bytes = resp->v.v0.bytes; /* the payload of this chunk */
+ lcb_size_t nbytes = resp->v.v0.nbytes; /* length of this data chunk */
+
+ /* check error */
+ switch (error) {
+ case LCB_SUCCESS:
+ /* check for valid bytes */
+ if (bytes && nbytes > 1) {
+ /* debug */
+ DEBUG("rlm_couchbase: (get_callback) got %zu bytes", nbytes);
+ /* parse string to json object */
+ c->jobj = json_tokener_parse_ex(c->jtok, bytes, nbytes);
+ /* switch on tokener error */
+ switch ((c->jerr = json_tokener_get_error(c->jtok))) {
+ case json_tokener_continue:
+ /* check object - should be null */
+ if (c->jobj != NULL) {
+ ERROR("rlm_couchbase: (get_callback) object not null on continue!");
+ }
+ break;
+ case json_tokener_success:
+ /* do nothing */
+ break;
+ default:
+ /* log error */
+ ERROR("rlm_couchbase: (get_callback) json parsing error: %s",
+ json_tokener_error_desc(c->jerr));
+ break;
+ }
+ }
+ break;
+
+ case LCB_KEY_ENOENT:
+ /* ignored */
+ DEBUG("rlm_couchbase: (get_callback) key does not exist");
+ break;
+
+ default:
+ /* log error */
+ ERROR("rlm_couchbase: (get_callback) %s (0x%x)", lcb_strerror(instance, error), error);
+ break;
+ }
+}
+
+/** Couchbase callback for http (view) operations
+ *
+ * @param request Couchbase http request object.
+ * @param instance Couchbase connection instance.
+ * @param cookie Couchbase cookie for returning information from callbacks.
+ * @param error Couchbase error object.
+ * @param resp Couchbase http response object.
+ */
+void couchbase_http_data_callback(lcb_http_request_t request, lcb_t instance, const void *cookie,
+ lcb_error_t error, const lcb_http_resp_t *resp)
+{
+ cookie_u cu; /* union of const and non const pointers */
+ cu.cdata = cookie; /* set const union member to cookie passed from couchbase */
+ cookie_t *c = (cookie_t *) cu.data; /* set our cookie struct using non-const member */
+ const char *bytes = resp->v.v0.bytes; /* the payload of this chunk */
+ lcb_size_t nbytes = resp->v.v0.nbytes; /* length of this data chunk */
+
+ /* check error */
+ switch (error) {
+ case LCB_SUCCESS:
+ /* check for valid bytes */
+ if (bytes && nbytes > 1) {
+ /* debug */
+ DEBUG("rlm_couchbase: (http_data_callback) got %zu bytes", nbytes);
+ /* parse string to json object */
+ c->jobj = json_tokener_parse_ex(c->jtok, bytes, nbytes);
+ /* switch on tokener error */
+ switch ((c->jerr = json_tokener_get_error(c->jtok))) {
+ case json_tokener_continue:
+ /* check object - should be null */
+ if (c->jobj != NULL) {
+ ERROR("rlm_couchbase: (http_data_callback) object not null on continue!");
+ }
+ break;
+ case json_tokener_success:
+ /* do nothing */
+ break;
+ default:
+ /* log error */
+ ERROR("rlm_couchbase: (http_data_callback) json parsing error: %s",
+ json_tokener_error_desc(c->jerr));
+ break;
+ }
+ }
+ break;
+
+ default:
+ /* log error */
+ ERROR("rlm_couchbase: (http_data_callback) %s (0x%x)", lcb_strerror(instance, error), error);
+ break;
+ }
+ /* silent compiler */
+ (void)request;
+}
+
+/** Initialize a Couchbase connection instance
+ *
+ * Initialize all information relating to a Couchbase instance and configure available method callbacks.
+ * This function forces synchronous operation and will wait for a connection or timeout.
+ *
+ * @param instance Empty (un-allocated) Couchbase instance object.
+ * @param host The Couchbase server or list of servers.
+ * @param bucket The Couchbase bucket to associate with the instance.
+ * @param pass The Couchbase bucket password (NULL if none).
+ * @return Couchbase error object.
+ */
+lcb_error_t couchbase_init_connection(lcb_t *instance, const char *host, const char *bucket, const char *pass)
+{
+ lcb_error_t error; /* couchbase command return */
+ struct lcb_create_st options; /* init create struct */
+
+ /* init options */
+ memset(&options, 0, sizeof(options));
+
+ /* assign couchbase create options */
+ options.v.v0.host = host;
+ options.v.v0.bucket = bucket;
+
+ /* assign user and password if they were both passed */
+ if (bucket != NULL && pass != NULL) {
+ options.v.v0.user = bucket;
+ options.v.v0.passwd = pass;
+ }
+
+ /* create couchbase connection instance */
+ if ((error = lcb_create(instance, &options)) != LCB_SUCCESS) {
+ /* return error */
+ return error;
+ }
+
+ /* initiate connection */
+ if ((error = lcb_connect(*instance)) == LCB_SUCCESS) {
+ /* set general method callbacks */
+ lcb_set_stat_callback(*instance, couchbase_stat_callback);
+ lcb_set_store_callback(*instance, couchbase_store_callback);
+ lcb_set_get_callback(*instance, couchbase_get_callback);
+ lcb_set_http_data_callback(*instance, couchbase_http_data_callback);
+ /* wait on connection */
+ lcb_wait(*instance);
+ } else {
+ /* return error */
+ return error;
+ }
+
+ /* return instance */
+ return error;
+}
+
+/** Request Couchbase server statistics
+ *
+ * Setup and execute a request for cluster statistics and wait for the result.
+ *
+ * @param instance Couchbase connection instance.
+ * @param cookie Couchbase cookie for returning information from callbacks.
+ * @return Couchbase error object.
+ */
+lcb_error_t couchbase_server_stats(lcb_t instance, const void *cookie)
+{
+ lcb_error_t error; /* couchbase command return */
+ lcb_server_stats_cmd_t cmd; /* server stats command stuct */
+ const lcb_server_stats_cmd_t *commands[1]; /* server stats commands array */
+
+ /* init commands */
+ commands[0] = &cmd;
+ memset(&cmd, 0, sizeof(cmd));
+
+ /* populate command struct */
+ cmd.v.v0.name = "tap";
+ cmd.v.v0.nname = strlen(cmd.v.v0.name);
+
+ /* get statistics */
+ if ((error = lcb_server_stats(instance, cookie, 1, commands)) == LCB_SUCCESS) {
+ /* enter event look on success */
+ lcb_wait(instance);
+ }
+
+ /* return error */
+ return error;
+}
+
+/** Store a document by key in Couchbase
+ *
+ * Setup and execute a Couchbase set operation and wait for the result.
+ *
+ * @param instance Couchbase connection instance.
+ * @param key Document key to store in the database.
+ * @param document Document body to store in the database.
+ * @param expire Expiration time for the document (0 = never)
+ * @return Couchbase error object.
+ */
+lcb_error_t couchbase_set_key(lcb_t instance, const char *key, const char *document, int expire)
+{
+ lcb_error_t error; /* couchbase command return */
+ lcb_store_cmd_t cmd; /* store command stuct */
+ const lcb_store_cmd_t *commands[1]; /* store commands array */
+
+ /* init commands */
+ commands[0] = &cmd;
+ memset(&cmd, 0, sizeof(cmd));
+
+ /* populate command struct */
+ cmd.v.v0.key = key;
+ cmd.v.v0.nkey = strlen(cmd.v.v0.key);
+ cmd.v.v0.bytes = document;
+ cmd.v.v0.nbytes = strlen(cmd.v.v0.bytes);
+ cmd.v.v0.exptime = expire;
+ cmd.v.v0.operation = LCB_SET;
+
+ /* store key/document in couchbase */
+ if ((error = lcb_store(instance, NULL, 1, commands)) == LCB_SUCCESS) {
+ /* enter event loop on success */
+ lcb_wait(instance);
+ }
+
+ /* return error */
+ return error;
+}
+
+/** Retrieve a document by key from Couchbase
+ *
+ * Setup and execute a Couchbase get request and wait for the result.
+ *
+ * @param instance Couchbase connection instance.
+ * @param cookie Couchbase cookie for returning information from callbacks.
+ * @param key Document key to fetch.
+ * @return Couchbase error object.
+ */
+lcb_error_t couchbase_get_key(lcb_t instance, const void *cookie, const char *key)
+{
+ cookie_u cu; /* union of const and non const pointers */
+ cu.cdata = cookie; /* set const union member to cookie passed from couchbase */
+ cookie_t *c = (cookie_t *) cu.data; /* set our cookie struct using non-const member */
+ lcb_error_t error; /* couchbase command return */
+ lcb_get_cmd_t cmd; /* get command struct */
+ const lcb_get_cmd_t *commands[1]; /* get commands array */
+
+ /* init commands */
+ commands[0] = &cmd;
+ memset(&cmd, 0, sizeof(cmd));
+
+ /* populate command struct */
+ cmd.v.v0.key = key;
+ cmd.v.v0.nkey = strlen(cmd.v.v0.key);
+
+ /* clear cookie */
+ memset(c, 0, sizeof(cookie_t));
+
+ /* init tokener error */
+ c->jerr = json_tokener_success;
+
+ /* create token */
+ c->jtok = json_tokener_new();
+
+ /* debugging */
+ DEBUG3("rlm_couchbase: fetching document %s", key);
+
+ /* get document */
+ if ((error = lcb_get(instance, c, 1, commands)) == LCB_SUCCESS) {
+ /* enter event loop on success */
+ lcb_wait(instance);
+ }
+
+ /* free token */
+ json_tokener_free(c->jtok);
+
+ /* return error */
+ return error;
+}
+
+/** Query a Couchbase design document view
+ *
+ * Setup and execute a Couchbase view request and wait for the result.
+ *
+ * @param instance Couchbase connection instance.
+ * @param cookie Couchbase cookie for returning information from callbacks.
+ * @param path The fully qualified view path including the design document and view name.
+ * @param post The post payload (NULL for none).
+ * @return Couchbase error object.
+ */
+lcb_error_t couchbase_query_view(lcb_t instance, const void *cookie, const char *path, const char *post)
+{
+ cookie_u cu; /* union of const and non const pointers */
+ cu.cdata = cookie; /* set const union member to cookie passed from couchbase */
+ cookie_t *c = (cookie_t *) cu.data; /* set our cookie struct using non-const member */
+ lcb_error_t error; /* couchbase command return */
+ lcb_http_cmd_t cmd; /* http command struct */
+ const lcb_http_cmd_t *commands; /* http commands array */
+
+ commands = &cmd;
+ memset(&cmd, 0, sizeof(cmd));
+
+ /* populate command struct */
+ cmd.v.v0.path = path;
+ cmd.v.v0.npath = strlen(cmd.v.v0.path);
+ cmd.v.v0.body = post;
+ cmd.v.v0.nbody = post ? strlen(post) : 0;
+ cmd.v.v0.method = post ? LCB_HTTP_METHOD_POST : LCB_HTTP_METHOD_GET;
+ cmd.v.v0.chunked = 1;
+ cmd.v.v0.content_type = "application/json";
+
+ /* clear cookie */
+ memset(c, 0, sizeof(cookie_t));
+
+ /* init tokener error */
+ c->jerr = json_tokener_success;
+
+ /* create token */
+ c->jtok = json_tokener_new();
+
+ /* debugging */
+ DEBUG3("rlm_couchbase: fetching view %s", path);
+
+ /* query the view */
+ if ((error = lcb_make_http_request(instance, c, LCB_HTTP_TYPE_VIEW, commands, NULL)) == LCB_SUCCESS) {
+ /* enter event loop on success */
+ lcb_wait(instance);
+ }
+
+ /* free token */
+ json_tokener_free(c->jtok);
+
+ /* return error */
+ return error;
+}
diff --git a/src/modules/rlm_couchbase/couchbase.h b/src/modules/rlm_couchbase/couchbase.h
new file mode 100644
index 0000000..529bd72
--- /dev/null
+++ b/src/modules/rlm_couchbase/couchbase.h
@@ -0,0 +1,94 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA
+ */
+
+/**
+ * $Id$
+ *
+ * @brief Couchbase wrapper function prototypes and datatypes.
+ * @file couchbase.h
+ *
+ * @author Aaron Hurt <ahurt@anbcs.com>
+ * @copyright 2013-2014 The FreeRADIUS Server Project.
+ */
+
+#ifndef _couchbase_h_
+#define _couchbase_h_
+
+RCSIDH(couchbase_h, "$Id$")
+
+#ifdef HAVE_WDOCUMENTATION
+DIAG_OFF(documentation)
+#endif
+#include <libcouchbase/couchbase.h>
+#ifdef HAVE_WDOCUMENTATION
+DIAG_ON(documentation)
+#endif
+
+#include "jsonc_missing.h"
+
+/** Information relating to the parsing of Couchbase document payloads
+ *
+ * This structure holds various references to json-c objects used when parsing
+ * Couchbase document payloads.
+ */
+typedef struct cookie_t {
+ json_object *jobj; //!< JSON objects handled by the json-c library.
+ json_tokener *jtok; //!< JSON tokener objects handled by the json-c library.
+ enum json_tokener_error jerr; //!< Error values produced by the json-c library.
+} cookie_t;
+
+/** Union of constant and non-constant pointers
+ *
+ * This is used to squelch compiler warnings about casting when passing data
+ * between functions expecting different data types.
+ */
+typedef union cookie_u {
+ const void *cdata; //!< Constant pointer to cookie payload (@p cookie_t).
+ void *data; //!< Non-constant pointer to data payload (@p cookie_t).
+} cookie_u;
+
+/* couchbase statistics callback */
+void couchbase_stat_callback(lcb_t instance, const void *cookie, lcb_error_t error,
+ const lcb_server_stat_resp_t *resp);
+
+/* store a key/document in couchbase */
+void couchbase_store_callback(lcb_t instance, const void *cookie, lcb_storage_t operation,
+ lcb_error_t error, const lcb_store_resp_t *item);
+
+/* get a document by key from couchbase */
+void couchbase_get_callback(lcb_t instance, const void *cookie, lcb_error_t error,
+ const lcb_get_resp_t *item);
+
+/* couchbase http callback for data chunks */
+void couchbase_http_data_callback(lcb_http_request_t request, lcb_t instance,
+ const void *cookie, lcb_error_t error, const lcb_http_resp_t *resp);
+
+/* create a couchbase instance and connect to the cluster */
+lcb_error_t couchbase_init_connection(lcb_t *instance, const char *host, const char *bucket, const char *pass);
+
+/* get server statistics */
+lcb_error_t couchbase_server_stats(lcb_t instance, const void *cookie);
+
+/* store document/key in couchbase */
+lcb_error_t couchbase_set_key(lcb_t instance, const char *key, const char *document, int expire);
+
+/* pull document from couchbase by key */
+lcb_error_t couchbase_get_key(lcb_t instance, const void *cookie, const char *key);
+
+/* query a couchbase view via http */
+lcb_error_t couchbase_query_view(lcb_t instance, const void *cookie, const char *path, const char *post);
+
+#endif /* _couchbase_h_ */
diff --git a/src/modules/rlm_couchbase/jsonc_missing.c b/src/modules/rlm_couchbase/jsonc_missing.c
new file mode 100644
index 0000000..dc3e7f6
--- /dev/null
+++ b/src/modules/rlm_couchbase/jsonc_missing.c
@@ -0,0 +1,82 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA
+ */
+
+/**
+ * $Id$
+ *
+ * @brief Workarounds for missing functions in older json-c libraries.
+ * @file jsonc_missing.c
+ *
+ * @author Aaron Hurt <ahurt@anbcs.com>
+ * @copyright 2013-2014 The FreeRADIUS Server Project.
+ */
+
+RCSID("$Id$")
+
+#include <string.h>
+
+#include "jsonc_missing.h"
+
+#ifndef HAVE_JSON_C_VERSION
+ const char *json_c_version(void) {
+ return "Unknown (less than 0.10) - Please upgrade";
+ }
+#endif
+
+#ifndef HAVE_JSON_OBJECT_GET_STRING_LEN
+int json_object_get_string_len(json_object *obj) {
+ if ((obj == NULL) || (json_object_get_type(obj) != json_type_string))
+ return 0;
+ return (int)strlen(json_object_get_string(obj));
+}
+#endif
+
+#ifndef HAVE_JSON_OBJECT_OBJECT_GET_EX
+int json_object_object_get_ex(struct json_object *jso, const char *key, struct json_object **value) {
+ struct json_object *jobj;
+
+ if ((jso == NULL) || (key == NULL)) return 0;
+ if (value != NULL) *value = NULL;
+
+ switch (json_object_get_type(jso)) {
+ case json_type_object:
+ jobj = json_object_object_get(jso, key);
+ if (jobj == NULL) return 0;
+
+ if (value != NULL) *value = jobj;
+ return 1;
+
+ default:
+ if (value != NULL) *value = NULL;
+ return 0;
+ }
+}
+#endif
+
+#ifndef HAVE_JSON_TOKENER_GET_ERROR
+enum json_tokener_error json_tokener_get_error(json_tokener *tok) {
+ return tok->err;
+}
+#endif
+
+#ifndef HAVE_JSON_TOKENER_ERROR_DESC
+const char *json_tokener_error_desc(enum json_tokener_error jerr) {
+ int jerr_int = (int)jerr;
+ if (json_tokener_errors[jerr_int] == NULL)
+ return "Unknown error, invalid json_tokener_error value passed to json_tokener_error_desc()";
+ return json_tokener_errors[jerr_int];
+}
+#endif
diff --git a/src/modules/rlm_couchbase/jsonc_missing.h b/src/modules/rlm_couchbase/jsonc_missing.h
new file mode 100644
index 0000000..1100eff
--- /dev/null
+++ b/src/modules/rlm_couchbase/jsonc_missing.h
@@ -0,0 +1,89 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA
+ */
+
+/**
+ * $Id$
+ *
+ * @brief Function prototypes for missing functions in older json-c libraries.
+ * @file jsonc_missing.h
+ *
+ * @author Aaron Hurt <ahurt@anbcs.com>
+ * @copyright 2013-2014 The FreeRADIUS Server Project.
+ */
+
+#ifndef _jsonc_missing_h_
+#define _jsonc_missing_h_
+
+RCSIDH(jsonc_missing_h, "$Id$")
+
+#include "config.h"
+
+#if defined(HAVE_JSONMC_JSON_H)
+# include <json-c/json.h>
+#elif defined(HAVE_JSON_JSON_H)
+# include <json/json.h>
+#endif
+
+#ifndef HAVE_JSON_C_VERSION
+const char *json_c_version(void);
+#endif
+
+#ifndef HAVE_JSON_OBJECT_OBJECT_GET_EX
+# include <json/json_object_private.h>
+#endif
+
+#ifndef HAVE_JSON_OBJECT_GET_STRING_LEN
+int json_object_get_string_len(struct json_object *obj);
+#endif
+
+#ifndef HAVE_JSON_OBJECT_OBJECT_GET_EX
+int json_object_object_get_ex(struct json_object* jso, const char *key, struct json_object **value);
+#endif
+
+#ifndef HAVE_JSON_TOKENER_ERROR_DESC
+const char *json_tokener_error_desc(enum json_tokener_error jerr);
+#endif
+
+#ifndef HAVE_JSON_TOKENER_GET_ERROR
+enum json_tokener_error json_tokener_get_error(json_tokener *tok);
+#endif
+
+/* correct poor const handling within json-c library */
+#ifdef json_object_object_foreach
+# undef json_object_object_foreach
+#endif
+
+/* redefine with correct handling of const pointers */
+#if defined(__GNUC__) && !defined(__STRICT_ANSI__)
+# define json_object_object_foreach(obj, key, val) \
+ char *key = NULL; \
+ struct json_object *val = NULL; \
+ union ctn_u {const void *cdata; void *data; } ctn; \
+ for (struct lh_entry *entry = json_object_get_object(obj)->head; \
+ ({ if (entry) { key = (char *)entry->k; ctn.cdata = entry->v; \
+ val = (struct json_object *)ctn.data; }; entry; }); \
+ entry = entry->next)
+#else /* ANSI C or MSC */
+# define json_object_object_foreach(obj,key,val) \
+ char const *key = NULL; \
+ struct json_object *val = NULL; \
+ struct lh_entry *entry; \
+ union ctn_u {const void *cdata; void *data; } ctn; \
+ for (entry = json_object_get_object(obj)->head; \
+ (entry ? (key = (char const *)entry->k, ctn.cdata = entry->v, \
+ val = (struct json_object *)ctn.data, entry) : 0); entry = entry->next)
+#endif /* defined(__GNUC__) && !defined(__STRICT_ANSI__) */
+#endif /* _jsonc_missing_h_ */
diff --git a/src/modules/rlm_couchbase/mod.c b/src/modules/rlm_couchbase/mod.c
new file mode 100644
index 0000000..1d4e024
--- /dev/null
+++ b/src/modules/rlm_couchbase/mod.c
@@ -0,0 +1,767 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA
+ */
+
+/**
+ * $Id$
+ *
+ * @brief Utillity functions used in the module.
+ * @file mod.c
+ *
+ * @author Aaron Hurt <ahurt@anbcs.com>
+ * @copyright 2013-2014 The FreeRADIUS Server Project.
+ */
+
+RCSID("$Id$")
+
+#include <freeradius-devel/radiusd.h>
+
+#include "mod.h"
+#include "couchbase.h"
+#include "jsonc_missing.h"
+
+/** Delete a conneciton pool handle and free related resources
+ *
+ * Destroys the underlying Couchbase connection handle freeing any related
+ * resources and closes the socket connection.
+ *
+ * @param chandle The connection handle to destroy.
+ * @return Always returns 0 (success) in all conditions.
+ */
+static int _mod_conn_free(rlm_couchbase_handle_t *chandle)
+{
+ lcb_t cb_inst = chandle->handle; /* couchbase instance */
+
+ /* destroy/free couchbase instance */
+ lcb_destroy(cb_inst);
+
+ /* return */
+ return 0;
+}
+
+/** Create a new connection pool handle
+ *
+ * Create a new connection to Couchbase within the pool and initialize
+ * information associated with the connection instance.
+ *
+ * @param ctx The connection parent context.
+ * @param instance The module instance.
+ * @return The new connection handle or NULL on error.
+ */
+void *mod_conn_create(TALLOC_CTX *ctx, void *instance)
+{
+ rlm_couchbase_t *inst = instance; /* module instance pointer */
+ rlm_couchbase_handle_t *chandle = NULL; /* connection handle pointer */
+ cookie_t *cookie = NULL; /* couchbase cookie */
+ lcb_t cb_inst; /* couchbase connection instance */
+ lcb_error_t cb_error; /* couchbase error status */
+
+ /* create instance */
+ cb_error = couchbase_init_connection(&cb_inst, inst->server, inst->bucket, inst->password);
+
+ /* check couchbase instance */
+ if (cb_error != LCB_SUCCESS) {
+ ERROR("rlm_couchbase: failed to initiate couchbase connection: %s (0x%x)",
+ lcb_strerror(NULL, cb_error), cb_error);
+ /* destroy/free couchbase instance */
+ lcb_destroy(cb_inst);
+ /* fail */
+ return NULL;
+ }
+
+ /* allocate memory for couchbase connection instance abstraction */
+ chandle = talloc_zero(ctx, rlm_couchbase_handle_t);
+ talloc_set_destructor(chandle, _mod_conn_free);
+
+ /* allocate cookie off handle */
+ cookie = talloc_zero(chandle, cookie_t);
+
+ /* init tokener error and json object */
+ cookie->jerr = json_tokener_success;
+ cookie->jobj = NULL;
+
+ /* populate handle */
+ chandle->cookie = cookie;
+ chandle->handle = cb_inst;
+
+ /* return handle struct */
+ return chandle;
+}
+
+/** Build a JSON object map from the configuration "update" section
+ *
+ * Parse the "map" section from the module configuration file and store this
+ * as a JSON object (key/value list) in the module instance. This map will be
+ * used to lookup and map attributes for all incoming accounting requests.
+ *
+ * @param conf Configuration section.
+ * @param instance The module instance.
+ * @return Returns 0 on success, -1 on error.
+ */
+int mod_build_attribute_element_map(CONF_SECTION *conf, void *instance)
+{
+ rlm_couchbase_t *inst = instance; /* our module instance */
+ CONF_SECTION *cs; /* module config section */
+ CONF_ITEM *ci; /* config item */
+ CONF_PAIR *cp; /* conig pair */
+ const char *attribute, *element; /* attribute and element names */
+
+ /* find update section */
+ cs = cf_section_sub_find(conf, "update");
+
+ /* backwards compatibility */
+ if (!cs) {
+ cs = cf_section_sub_find(conf, "map");
+ WARN("rlm_couchbase: found deprecated 'map' section - please change to 'update'");
+ }
+
+ /* check section */
+ if (!cs) {
+ ERROR("rlm_couchbase: failed to find 'update' section in config");
+ /* fail */
+ return -1;
+ }
+
+ /* create attribute map object */
+ inst->map = json_object_new_object();
+
+ /* parse update section */
+ for (ci = cf_item_find_next(cs, NULL); ci != NULL; ci = cf_item_find_next(cs, ci)) {
+ /* validate item */
+ if (!cf_item_is_pair(ci)) {
+ ERROR("rlm_couchbase: failed to parse invalid item in 'update' section");
+ /* free map */
+ if (inst->map) {
+ json_object_put(inst->map);
+ }
+ /* fail */
+ return -1;
+ }
+
+ /* get value pair from item */
+ cp = cf_item_to_pair(ci);
+
+ /* get pair name (attribute name) */
+ attribute = cf_pair_attr(cp);
+
+ if (!dict_attrbyname(attribute)) {
+ ERROR("Unknown RADIUS attribute '%s'", attribute);
+ return -1;
+ }
+
+ /* get pair value (element name) */
+ element = cf_pair_value(cp);
+
+ /* add pair name and value */
+ json_object_object_add(inst->map, attribute, json_object_new_string(element));
+
+ /* debugging */
+ DEBUG3("rlm_couchbase: added attribute '%s' to element '%s' mapping", attribute, element);
+ }
+
+ /* debugging */
+ DEBUG3("rlm_couchbase: built attribute to element mapping %s", json_object_to_json_string(inst->map));
+
+ /* return */
+ return 0;
+}
+
+/** Map attributes to JSON element names
+ *
+ * Attempt to map the passed attribute name to the configured JSON element
+ * name using the JSON object map mod_build_attribute_element_map().
+ *
+ * @param name The character name of the requested attribute.
+ * @param map The JSON object map to use for the lookup.
+ * @param buf The buffer where the given element will be stored if found.
+ * @return Returns 0 on success, -1 on error.
+ */
+int mod_attribute_to_element(const char *name, json_object *map, void *buf)
+{
+ json_object *jval; /* json object values */
+
+ /* clear buffer */
+ memset((char *) buf, 0, MAX_KEY_SIZE);
+
+ /* attempt to map attribute */
+ if (json_object_object_get_ex(map, name, &jval)) {
+ /* copy and check size */
+ if (strlcpy(buf, json_object_get_string(jval), MAX_KEY_SIZE) >= MAX_KEY_SIZE) {
+ /* oops ... this value is bigger than our buffer ... error out */
+ ERROR("rlm_couchbase: json map value larger than MAX_KEY_SIZE - %d", MAX_KEY_SIZE);
+ /* return fail */
+ return -1;
+ }
+ /* looks good */
+ return 0;
+ }
+
+ /* debugging */
+ DEBUG("rlm_couchbase: skipping attribute with no map entry - %s", name);
+
+ /* default return */
+ return -1;
+}
+
+/** Build value pairs from the passed JSON object and add to the request
+ *
+ * Parse the passed JSON object and create value pairs that will be injected into
+ * the given request for authorization.
+ *
+ * Example JSON document structure:
+ * @code{.json}
+ * {
+ * "docType": "raduser",
+ * "userName": "test",
+ * "config": {
+ * "SHA-Password": {
+ * "value": "a94a8fe5ccb19ba61c4c0873d391e987982fbbd3",
+ * "op": ":="
+ * }
+ * },
+ * "reply": {
+ * "Reply-Message": {
+ * "value": "Hidey Ho!",
+ * "op": "="
+ * }
+ * }
+ * }
+ * @endcode
+ *
+ * @param json The JSON object representation of the user documnent.
+ * @param section The pair section ("config" or "reply").
+ * @param request The request to which the generated pairs should be added.
+ */
+void *mod_json_object_to_value_pairs(json_object *json, const char *section, REQUEST *request)
+{
+ json_object *jobj, *jval, *jop; /* json object pointers */
+ TALLOC_CTX *ctx; /* talloc context for fr_pair_make */
+ VALUE_PAIR *vp, **ptr; /* value pair and value pair pointer for fr_pair_make */
+
+ /* assign ctx and vps for fr_pair_make based on section */
+ if (strcmp(section, "config") == 0) {
+ ctx = request;
+ ptr = &(request->config);
+ } else if (strcmp(section, "reply") == 0) {
+ ctx = request->reply;
+ ptr = &(request->reply->vps);
+ } else {
+ /* log error - this shouldn't happen */
+ RERROR("invalid section passed for fr_pair_make");
+ /* return */
+ return NULL;
+ }
+
+ /* get config payload */
+ if (json_object_object_get_ex(json, section, &jobj)) {
+ /* make sure we have the correct type */
+ if ((jobj == NULL) || !json_object_is_type(jobj, json_type_object)) {
+ /* log error */
+ RERROR("invalid json type for '%s' section - sections must be json objects", section);
+ /* reuturn */
+ return NULL;
+ }
+ /* loop through object */
+ json_object_object_foreach(jobj, attribute, json_vp) {
+ /* check for appropriate type in value and op */
+ if ((jobj == NULL) || !json_object_is_type(json_vp, json_type_object)) {
+ /* log error */
+ RERROR("invalid json type for '%s' attribute - attributes must be json objects",
+ attribute);
+ /* return */
+ return NULL;
+ }
+ /* debugging */
+ RDEBUG("parsing '%s' attribute: %s => %s", section, attribute,
+ json_object_to_json_string(json_vp));
+ /* create pair from json object */
+ if (json_object_object_get_ex(json_vp, "value", &jval) &&
+ json_object_object_get_ex(json_vp, "op", &jop)) {
+ /* check for null before getting type */
+ if (jval == NULL) return NULL;
+ /* make correct pairs based on json object type */
+ switch (json_object_get_type(jval)) {
+ case json_type_double:
+ case json_type_int:
+ case json_type_string:
+ /* debugging */
+ RDEBUG("adding '%s' attribute to '%s' section", attribute, section);
+ /* add pair */
+ vp = fr_pair_make(ctx, ptr, attribute, json_object_get_string(jval),
+ fr_str2int(fr_tokens, json_object_get_string(jop), 0));
+ /* check pair */
+ if (!vp) {
+ RERROR("could not build value pair for '%s' attribute (%s)",
+ attribute, fr_strerror());
+ /* return */
+ return NULL;
+ }
+ break;
+
+ case json_type_object:
+ case json_type_array:
+ /* log error - we want to handle these eventually */
+ RERROR("skipping unhandled nested json object or array value pair object");
+ break;
+
+ default:
+ /* log error - this shouldn't ever happen */
+ RERROR("skipping unhandled json type in value pair object");
+ break;
+ }
+ } else {
+ /* log error */
+ RERROR("failed to get 'value' or 'op' element for '%s' attribute", attribute);
+ }
+ }
+ /* return NULL */
+ return NULL;
+ }
+
+ /* debugging */
+ RDEBUG("couldn't find '%s' section in json object - not adding value pairs for this section", section);
+
+ /* return NULL */
+ return NULL;
+}
+
+/** Convert value pairs to json objects
+ *
+ * Take the passed value pair and convert it to a json-c JSON object.
+ * This code is heavily based on the vp_prints_value_json() function
+ * from src/lib/print.c.
+ *
+ * @param request The request object.
+ * @param vp The value pair to convert.
+ * @param raw_value Print all values as raw, even if enum values exist.
+ * @return Returns a JSON object.
+ */
+json_object *mod_value_pair_to_json_object(REQUEST *request, VALUE_PAIR *vp, bool raw_value)
+{
+ char value[255]; /* radius attribute value */
+
+ /* add this attribute/value pair to our json output */
+ if (!vp->da->flags.has_tag) {
+ unsigned int i;
+
+ switch (vp->da->type) {
+ case PW_TYPE_INTEGER:
+ i = vp->vp_integer;
+ goto print_int;
+
+ case PW_TYPE_SHORT:
+ i = vp->vp_short;
+ goto print_int;
+
+ case PW_TYPE_BYTE:
+ i = vp->vp_byte;
+
+ print_int:
+ /* add a raw value to our json output - i.e. do not try resolve enum.
+ skip this if raw_value is false, and we have a value in the dictionary */
+ if (!raw_value && !vp->da->flags.has_value) break;
+#ifdef HAVE_JSON_OBJECT_NEW_INT64
+ /* debug */
+ RDEBUG3("creating new int64 for unsigned 32 bit int/byte/short '%s'", vp->da->name);
+ /* return as 64 bit int - JSON spec does not support unsigned ints */
+ return json_object_new_int64(i);
+#else
+ /* debug */
+ RDEBUG3("creating new int for unsigned 32 bit int/byte/short '%s'", vp->da->name);
+ /* return as 64 bit int - JSON spec does not support unsigned ints */
+ return json_object_new_int(i);
+#endif
+
+ case PW_TYPE_SIGNED:
+#ifdef HAVE_JSON_OBJECT_NEW_INT64
+ /* debug */
+ RDEBUG3("creating new int64 for signed 32 bit integer '%s'", vp->da->name);
+ /* return as 64 bit int - json-c represents all ints as 64 bits internally */
+ return json_object_new_int64(vp->vp_signed);
+#else
+ RDEBUG3("creating new int for signed 32 bit integer '%s'", vp->da->name);
+ /* return as signed int */
+ return json_object_new_int(vp->vp_signed);
+#endif
+
+ case PW_TYPE_INTEGER64:
+#ifdef HAVE_JSON_OBJECT_NEW_INT64
+ /* debug */
+ RDEBUG3("creating new int64 for 64 bit integer '%s'", vp->da->name);
+ /* return as 64 bit int - because it is a 64 bit int */
+ return json_object_new_int64(vp->vp_integer64);
+#else
+ /* warning */
+ RWARN("skipping 64 bit integer attribute '%s' - please upgrade json-c to 0.10+", vp->da->name);
+ break;
+#endif
+
+ default:
+ /* silence warnings - do nothing */
+ break;
+ }
+ }
+
+ /* keep going if not set above */
+ switch (vp->da->type) {
+ case PW_TYPE_STRING:
+ /* debug */
+ RDEBUG3("assigning string '%s' as string", vp->da->name);
+ /* return string value */
+ return json_object_new_string(vp->vp_strvalue);
+
+ default:
+ /* debug */
+ RDEBUG3("assigning unhandled '%s' as string", vp->da->name);
+ /* get standard value */
+ vp_prints_value(value, sizeof(value), vp, 0);
+ /* return string value from above */
+ return json_object_new_string(value);
+ }
+}
+
+/** Ensure accounting documents always contain a valid timestamp
+ *
+ * Inspect the given JSON object representation of an accounting document
+ * fetched from Couchbase and ensuse it contains a valid (non NULL) timestamp value.
+ *
+ * @param json JSON object representation of an accounting document.
+ * @param vps The value pairs associated with the current accounting request.
+ * @return Returns 0 on success, -1 on error.
+ */
+int mod_ensure_start_timestamp(json_object *json, VALUE_PAIR *vps)
+{
+ json_object *jval; /* json object value */
+ struct tm tm; /* struct to hold event time */
+ time_t ts = 0; /* values to hold time in seconds */
+ VALUE_PAIR *vp; /* values to hold value pairs */
+ char value[255]; /* store radius attribute values and our timestamp */
+
+ /* get our current start timestamp from our json body */
+ if (json_object_object_get_ex(json, "startTimestamp", &jval) == 0) {
+ /* debugging ... this shouldn't ever happen */
+ DEBUG("rlm_couchbase: failed to find 'startTimestamp' in current json body");
+ /* return */
+ return -1;
+ }
+
+ /* check for null value */
+ if (json_object_get_string(jval) != NULL) {
+ /* already set - nothing left to do */
+ return 0;
+ }
+
+ /* get current event timestamp */
+ if ((vp = fr_pair_find_by_num(vps, PW_EVENT_TIMESTAMP, 0, TAG_ANY)) != NULL) {
+ /* get seconds value from attribute */
+ ts = vp->vp_date;
+ } else {
+ /* debugging */
+ DEBUG("rlm_couchbase: failed to find event timestamp in current request");
+ /* return */
+ return -1;
+ }
+
+ /* clear value */
+ memset(value, 0, sizeof(value));
+
+ /* get elapsed session time */
+ if ((vp = fr_pair_find_by_num(vps, PW_ACCT_SESSION_TIME, 0, TAG_ANY)) != NULL) {
+ /* calculate diff */
+ ts = (ts - vp->vp_integer);
+ /* calculate start time */
+ size_t length = strftime(value, sizeof(value), "%b %e %Y %H:%M:%S %Z", localtime_r(&ts, &tm));
+ /* check length */
+ if (length > 0) {
+ /* debugging */
+ DEBUG("rlm_couchbase: calculated start timestamp: %s", value);
+ /* store new value in json body */
+ json_object_object_add(json, "startTimestamp", json_object_new_string(value));
+ } else {
+ /* debugging */
+ DEBUG("rlm_couchbase: failed to format calculated timestamp");
+ /* return */
+ return -1;
+ }
+ }
+
+ /* default return */
+ return 0;
+}
+
+/** Handle client value processing for client_map_section()
+ *
+ * @param out Character output
+ * @param cp Configuration pair
+ * @param data The client data
+ * @return Returns 0 on success, -1 on error.
+ */
+static int _get_client_value(char **out, CONF_PAIR const *cp, void *data)
+{
+ json_object *jval;
+
+ if (!json_object_object_get_ex((json_object *)data, cf_pair_value(cp), &jval)) {
+ *out = NULL;
+ return 0;
+ }
+
+ if (!jval) return -1;
+
+ *out = talloc_strdup(NULL, json_object_get_string(jval));
+ if (!*out) return -1;
+
+ return 0;
+}
+
+/** Load client entries from Couchbase client documents on startup
+ *
+ * This function executes the view defined in the module configuration and loops
+ * through all returned rows. The view is called with "stale=false" to ensure the
+ * most accurate data available when the view is called. This will force an index
+ * rebuild on this design document in Couchbase. However, since this function is only
+ * run once at sever startup this should not be a concern.
+ *
+ * @param inst The module instance.
+ * @param tmpl Default values for new clients.
+ * @param map The client attribute configuration section.
+ * @return Returns 0 on success, -1 on error.
+ */
+int mod_load_client_documents(rlm_couchbase_t *inst, CONF_SECTION *tmpl, CONF_SECTION *map)
+{
+ rlm_couchbase_handle_t *handle = NULL; /* connection pool handle */
+ char vpath[256], vid[MAX_KEY_SIZE], vkey[MAX_KEY_SIZE]; /* view path and fields */
+ char error[512]; /* view error return */
+ size_t idx = 0; /* row array index counter */
+ int retval = 0; /* return value */
+ lcb_error_t cb_error = LCB_SUCCESS; /* couchbase error holder */
+ json_object *json, *jval; /* json object holders */
+ json_object *jrows = NULL; /* json object to hold view rows */
+ CONF_SECTION *client; /* freeradius config section */
+ RADCLIENT *c; /* freeradius client */
+ int slen;
+
+ /* get handle */
+ handle = fr_connection_get(inst->pool);
+
+ /* check handle */
+ if (!handle) return -1;
+
+ /* set couchbase instance */
+ lcb_t cb_inst = handle->handle;
+
+ /* set cookie */
+ cookie_t *cookie = handle->cookie;
+
+ /* build view path */
+ slen = snprintf(vpath, sizeof(vpath), "%s?stale=false", inst->client_view);
+ if (slen >= (int) sizeof(vpath) || slen < 0) {
+ ERROR("rlm_couchbase: view path too long");
+ retval=-1;
+ goto free_and_return;
+ }
+
+
+ /* query view for document */
+ cb_error = couchbase_query_view(cb_inst, cookie, vpath, NULL);
+
+ /* check error and object */
+ if (cb_error != LCB_SUCCESS || cookie->jerr != json_tokener_success || !cookie->jobj) {
+ /* log error */
+ ERROR("rlm_couchbase: failed to execute view request or parse return");
+ /* set return */
+ retval = -1;
+ /* return */
+ goto free_and_return;
+ }
+
+ /* debugging */
+ DEBUG3("rlm_couchbase: cookie->jobj == %s", json_object_to_json_string(cookie->jobj));
+
+ /* check for error in json object */
+ if (json_object_object_get_ex(cookie->jobj, "error", &json)) {
+ /* build initial error buffer */
+ strlcpy(error, json_object_get_string(json), sizeof(error));
+ /* get error reason */
+ if (json_object_object_get_ex(cookie->jobj, "reason", &json)) {
+ /* append divider */
+ strlcat(error, " - ", sizeof(error));
+ /* append reason */
+ strlcat(error, json_object_get_string(json), sizeof(error));
+ }
+ /* log error */
+ ERROR("rlm_couchbase: view request failed with error: %s", error);
+ /* set return */
+ retval = -1;
+ /* return */
+ goto free_and_return;
+ }
+
+ /* check for document id in return */
+ if (!json_object_object_get_ex(cookie->jobj, "rows", &json)) {
+ /* log error */
+ ERROR("rlm_couchbase: failed to fetch rows from view payload");
+ /* set return */
+ retval = -1;
+ /* return */
+ goto free_and_return;
+ }
+
+ /* get and hold rows */
+ jrows = json_object_get(json);
+
+ /* free cookie object */
+ if (cookie->jobj) {
+ json_object_put(cookie->jobj);
+ cookie->jobj = NULL;
+ }
+
+ /* debugging */
+ DEBUG3("rlm_couchbase: jrows == %s", json_object_to_json_string(jrows));
+
+ /* check for valid row value */
+ if ((jrows == NULL) || !json_object_is_type(jrows, json_type_array) || json_object_array_length(jrows) < 1) {
+ /* log error */
+ ERROR("rlm_couchbase: no valid rows returned from view: %s", vpath);
+ /* set return */
+ retval = -1;
+ /* return */
+ goto free_and_return;
+ }
+
+ /* loop across all row elements */
+ for (idx = 0; idx < (size_t)json_object_array_length(jrows); idx++) {
+ /* fetch current index */
+ json = json_object_array_get_idx(jrows, idx);
+
+ /* get view id */
+ if (json_object_object_get_ex(json, "id", &jval)) {
+ /* clear view id */
+ memset(vid, 0, sizeof(vid));
+ /* copy and check length */
+ if (strlcpy(vid, json_object_get_string(jval), sizeof(vid)) >= sizeof(vid)) {
+ ERROR("rlm_couchbase: id from row longer than MAX_KEY_SIZE (%d)",
+ MAX_KEY_SIZE);
+ continue;
+ }
+ } else {
+ WARN("rlm_couchbase: failed to fetch id from row - skipping");
+ continue;
+ }
+
+ /* get view key */
+ if (json_object_object_get_ex(json, "key", &jval)) {
+ /* clear view key */
+ memset(vkey, 0, sizeof(vkey));
+ /* copy and check length */
+ if (strlcpy(vkey, json_object_get_string(jval), sizeof(vkey)) >= sizeof(vkey)) {
+ ERROR("rlm_couchbase: key from row longer than MAX_KEY_SIZE (%d)",
+ MAX_KEY_SIZE);
+ continue;
+ }
+ } else {
+ WARN("rlm_couchbase: failed to fetch key from row - skipping");
+ continue;
+ }
+
+ /* fetch document */
+ cb_error = couchbase_get_key(cb_inst, cookie, vid);
+
+ /* check error and object */
+ if (cb_error != LCB_SUCCESS || cookie->jerr != json_tokener_success || !cookie->jobj) {
+ /* log error */
+ ERROR("rlm_couchbase: failed to execute get request or parse return");
+ /* set return */
+ retval = -1;
+ /* return */
+ goto free_and_return;
+ }
+
+ /* debugging */
+ DEBUG3("rlm_couchbase: cookie->jobj == %s", json_object_to_json_string(cookie->jobj));
+
+ /* allocate conf section */
+ client = tmpl ? cf_section_dup(NULL, tmpl, "client", vkey, true) :
+ cf_section_alloc(NULL, "client", vkey);
+
+ if (client_map_section(client, map, _get_client_value, cookie->jobj) < 0) {
+ /* free config setion */
+ talloc_free(client);
+ /* set return */
+ retval = -1;
+ /* return */
+ goto free_and_return;
+ }
+
+ /*
+ * @todo These should be parented from something.
+ */
+ c = client_afrom_cs(NULL, client, false, false);
+ if (!c) {
+ ERROR("rlm_couchbase: failed to allocate client");
+ /* free config setion */
+ talloc_free(client);
+ /* set return */
+ retval = -1;
+ /* return */
+ goto free_and_return;
+ }
+
+ /*
+ * Client parents the CONF_SECTION which defined it.
+ */
+ talloc_steal(c, client);
+
+ /* attempt to add client */
+ if (!client_add(NULL, c)) {
+ ERROR("rlm_couchbase: failed to add client '%s' from '%s', possible duplicate?", vkey, vid);
+ /* free client */
+ client_free(c);
+ /* set return */
+ retval = -1;
+ /* return */
+ goto free_and_return;
+ }
+
+ /* debugging */
+ DEBUG("rlm_couchbase: client '%s' added", c->longname);
+
+ /* free json object */
+ if (cookie->jobj) {
+ json_object_put(cookie->jobj);
+ cookie->jobj = NULL;
+ }
+ }
+
+ free_and_return:
+
+ /* free rows */
+ if (jrows) {
+ json_object_put(jrows);
+ }
+
+ /* free json object */
+ if (cookie->jobj) {
+ json_object_put(cookie->jobj);
+ cookie->jobj = NULL;
+ }
+
+ /* release handle */
+ if (handle) {
+ fr_connection_release(inst->pool, handle);
+ }
+
+ /* return */
+ return retval;
+}
diff --git a/src/modules/rlm_couchbase/mod.h b/src/modules/rlm_couchbase/mod.h
new file mode 100644
index 0000000..3cf9a31
--- /dev/null
+++ b/src/modules/rlm_couchbase/mod.h
@@ -0,0 +1,101 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA
+ */
+
+/**
+ * $Id$
+ *
+ * @brief Function prototypes and datatypes used in the module.
+ * @file mod.h
+ *
+ * @author Aaron Hurt <ahurt@anbcs.com>
+ * @copyright 2013-2014 The FreeRADIUS Server Project.
+ */
+
+#ifndef _mod_h_
+#define _mod_h_
+
+RCSIDH(mod_h, "$Id$")
+
+#include <freeradius-devel/radiusd.h>
+
+#include "couchbase.h"
+#include "jsonc_missing.h"
+
+/* maximum size of a stored value */
+#define MAX_VALUE_SIZE 20480
+
+/* maximum length of a document key */
+#define MAX_KEY_SIZE 250
+
+/** The main module instance
+ *
+ * This struct contains the core module configuration.
+ */
+typedef struct rlm_couchbase_t {
+ char const *acct_key; //!< Accounting document key.
+ char const *doctype; //!< Value of accounting 'docType' element name.
+ uint32_t expire; //!< Accounting document expire time in seconds.
+
+ char const *server_raw; //!< Raw server string before parsing.
+ char const *server; //!< Couchbase server list.
+ char const *bucket; //!< Couchbase bucket.
+ char const *password; //!< Couchbase bucket password.
+
+ const char *user_key; //!< User document key.
+
+ bool read_clients; //!< Toggle for loading client records.
+ const char *client_view; //!< Couchbase view that returns client documents.
+
+ bool check_simul; //!< Toggle to enable simultaneous use checking.
+ const char *simul_view; //!< Couchbase view that returns accounting documents.
+
+ bool verify_simul; //!< Toggle to enable user login state verification.
+ const char *simul_vkey; //!< The query key to be used with simul_view.
+ bool delete_stale_sessions; //!< Toggle to trigger zapping of stale sessions.
+ bool raw_value; //!< Print raw values rather than resolving enums
+
+ json_object *map; //!< Json object to hold user defined attribute map.
+ fr_connection_pool_t *pool; //!< Connection pool.
+} rlm_couchbase_t;
+
+/** Couchbase instance specific information
+ *
+ * This struct contains the Couchbase connection handle as well as a
+ * cookie pointer to store fetched document payloads.
+ */
+typedef struct rlm_couchbase_handle_t {
+ void *handle; //!< Real couchbase instance.
+ void *cookie; //!< Couchbase cookie (@p cookie_u @p cookie_t).
+} rlm_couchbase_handle_t;
+
+/* define functions */
+void *mod_conn_create(TALLOC_CTX *ctx, void *instance);
+
+int mod_build_attribute_element_map(CONF_SECTION *conf, void *instance);
+
+int mod_attribute_to_element(const char *name, json_object *map, void *buf);
+
+void *mod_json_object_to_value_pairs(json_object *json, const char *section, REQUEST *request);
+
+json_object *mod_value_pair_to_json_object(REQUEST *request, VALUE_PAIR *vp, bool raw_value);
+
+int mod_ensure_start_timestamp(json_object *json, VALUE_PAIR *vps);
+
+int mod_client_map_section(CONF_SECTION *client, CONF_SECTION const *map, json_object *json, char const *docid);
+
+int mod_load_client_documents(rlm_couchbase_t *inst, CONF_SECTION *tmpl, CONF_SECTION *map);
+
+#endif /* _mod_h_ */
diff --git a/src/modules/rlm_couchbase/rlm_couchbase.c b/src/modules/rlm_couchbase/rlm_couchbase.c
new file mode 100644
index 0000000..d011e24
--- /dev/null
+++ b/src/modules/rlm_couchbase/rlm_couchbase.c
@@ -0,0 +1,874 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA
+ */
+
+/**
+ * $Id$
+ *
+ * @brief Integrate FreeRADIUS with the Couchbase document database.
+ * @file rlm_couchbase.c
+ *
+ * @author Aaron Hurt <ahurt@anbcs.com>
+ * @copyright 2013-2014 The FreeRADIUS Server Project.
+ */
+
+RCSID("$Id$")
+
+#include <freeradius-devel/radiusd.h>
+#include <freeradius-devel/libradius.h>
+#include <freeradius-devel/modules.h>
+#include <freeradius-devel/rad_assert.h>
+
+#include "mod.h"
+#include "couchbase.h"
+#include "jsonc_missing.h"
+
+/**
+ * Client Configuration
+ */
+static const CONF_PARSER client_config[] = {
+ { "view", FR_CONF_OFFSET(PW_TYPE_STRING, rlm_couchbase_t, client_view), "_design/client/_view/by_name" },
+ CONF_PARSER_TERMINATOR
+};
+
+/**
+ * Module Configuration
+ */
+static const CONF_PARSER module_config[] = {
+ { "server", FR_CONF_OFFSET(PW_TYPE_STRING | PW_TYPE_REQUIRED, rlm_couchbase_t, server_raw), NULL },
+ { "bucket", FR_CONF_OFFSET(PW_TYPE_STRING | PW_TYPE_REQUIRED, rlm_couchbase_t, bucket), NULL },
+ { "password", FR_CONF_OFFSET(PW_TYPE_STRING, rlm_couchbase_t, password), NULL },
+#ifdef WITH_ACCOUNTING
+ { "acct_key", FR_CONF_OFFSET(PW_TYPE_STRING | PW_TYPE_XLAT, rlm_couchbase_t, acct_key), "radacct_%{%{Acct-Unique-Session-Id}:-%{Acct-Session-Id}}" },
+ { "doctype", FR_CONF_OFFSET(PW_TYPE_STRING, rlm_couchbase_t, doctype), "radacct" },
+ { "expire", FR_CONF_OFFSET(PW_TYPE_INTEGER, rlm_couchbase_t, expire), 0 },
+#endif
+ { "user_key", FR_CONF_OFFSET(PW_TYPE_STRING | PW_TYPE_XLAT, rlm_couchbase_t, user_key), "raduser_%{md5:%{tolower:%{%{Stripped-User-Name}:-%{User-Name}}}}" },
+ { "read_clients", FR_CONF_OFFSET(PW_TYPE_BOOLEAN, rlm_couchbase_t, read_clients), NULL }, /* NULL defaults to "no" */
+ { "client", FR_CONF_POINTER(PW_TYPE_SUBSECTION, NULL), (void const *) client_config },
+#ifdef WITH_SESSION_MGMT
+ { "check_simul", FR_CONF_OFFSET(PW_TYPE_BOOLEAN, rlm_couchbase_t, check_simul), NULL }, /* NULL defaults to "no" */
+ { "simul_view", FR_CONF_OFFSET(PW_TYPE_STRING, rlm_couchbase_t, simul_view), "_design/acct/_view/by_user" },
+ { "simul_vkey", FR_CONF_OFFSET(PW_TYPE_STRING | PW_TYPE_XLAT, rlm_couchbase_t, simul_vkey), "%{tolower:%{%{Stripped-User-Name}:-%{User-Name}}}" },
+ { "verify_simul", FR_CONF_OFFSET(PW_TYPE_BOOLEAN, rlm_couchbase_t, verify_simul), NULL }, /* NULL defaults to "no" */
+#endif
+ { "raw_value", FR_CONF_OFFSET(PW_TYPE_BOOLEAN, rlm_couchbase_t, raw_value), "yes" },
+ CONF_PARSER_TERMINATOR
+};
+
+/** Initialize the rlm_couchbase module
+ *
+ * Intialize the module and create the initial Couchbase connection pool.
+ *
+ * @param conf The module configuration.
+ * @param instance The module instance.
+ * @return Returns 0 on success, -1 on error.
+ */
+static int mod_instantiate(CONF_SECTION *conf, void *instance)
+{
+ static bool version_done;
+
+ rlm_couchbase_t *inst = instance; /* our module instance */
+
+ if (!version_done) {
+ version_done = true;
+ INFO("rlm_couchbase: json-c version: %s", json_c_version());
+ INFO("rlm_couchbase: libcouchbase version: %s", lcb_get_version(NULL));
+ }
+
+ {
+ char *server, *p;
+ size_t len, i;
+ bool sep = false;
+
+ len = talloc_array_length(inst->server_raw);
+ server = p = talloc_array(inst, char, len);
+ for (i = 0; i < len; i++) {
+ switch (inst->server_raw[i]) {
+ case '\t':
+ case ' ':
+ case ',':
+ /* Consume multiple separators occurring in sequence */
+ if (sep == true) continue;
+
+ sep = true;
+ *p++ = ';';
+ break;
+
+ default:
+ sep = false;
+ *p++ = inst->server_raw[i];
+ break;
+ }
+ }
+
+ *p = '\0';
+ inst->server = server;
+ }
+
+ /* setup item map */
+ if (mod_build_attribute_element_map(conf, inst) != 0) {
+ /* fail */
+ return -1;
+ }
+
+ /* initiate connection pool */
+ inst->pool = fr_connection_pool_module_init(conf, inst, mod_conn_create, NULL, NULL);
+
+ /* check connection pool */
+ if (!inst->pool) {
+ ERROR("rlm_couchbase: failed to initiate connection pool");
+ /* fail */
+ return -1;
+ }
+
+ /* load clients if requested */
+ if (inst->read_clients) {
+ CONF_SECTION *cs, *map, *tmpl; /* conf section */
+
+ /* attempt to find client section */
+ cs = cf_section_sub_find(conf, "client");
+ if (!cs) {
+ ERROR("rlm_couchbase: failed to find client section while loading clients");
+ /* fail */
+ return -1;
+ }
+
+ /* attempt to find attribute subsection */
+ map = cf_section_sub_find(cs, "attribute");
+ if (!map) {
+ ERROR("rlm_couchbase: failed to find attribute subsection while loading clients");
+ /* fail */
+ return -1;
+ }
+
+ tmpl = cf_section_sub_find(cs, "template");
+
+ /* debugging */
+ DEBUG("rlm_couchbase: preparing to load client documents");
+
+ /* attempt to load clients */
+ if (mod_load_client_documents(inst, tmpl, map) != 0) {
+ /* fail */
+ return -1;
+ }
+ }
+
+ /* return okay */
+ return 0;
+}
+
+/** Handle authorization requests using Couchbase document data
+ *
+ * Attempt to fetch the document assocaited with the requested user by
+ * using the deterministic key defined in the configuration. When a valid
+ * document is found it will be parsed and the containing value pairs will be
+ * injected into the request.
+ *
+ * @param instance The module instance.
+ * @param request The authorization request.
+ * @return Returns operation status (@p rlm_rcode_t).
+ */
+static rlm_rcode_t mod_authorize(void *instance, REQUEST *request)
+{
+ rlm_couchbase_t *inst = instance; /* our module instance */
+ rlm_couchbase_handle_t *handle = NULL; /* connection pool handle */
+ char dockey[MAX_KEY_SIZE]; /* our document key */
+ lcb_error_t cb_error = LCB_SUCCESS; /* couchbase error holder */
+ rlm_rcode_t rcode = RLM_MODULE_OK; /* return code */
+
+ /* assert packet as not null */
+ rad_assert(request->packet != NULL);
+
+ /* attempt to build document key */
+ if (radius_xlat(dockey, sizeof(dockey), request, inst->user_key, NULL, NULL) < 0) {
+ /* log error */
+ RERROR("could not find user key attribute (%s) in packet", inst->user_key);
+ /* return */
+ return RLM_MODULE_FAIL;
+ }
+
+ /* get handle */
+ handle = fr_connection_get(inst->pool);
+
+ /* check handle */
+ if (!handle) return RLM_MODULE_FAIL;
+
+ /* set couchbase instance */
+ lcb_t cb_inst = handle->handle;
+
+ /* set cookie */
+ cookie_t *cookie = handle->cookie;
+
+ /* fetch document */
+ cb_error = couchbase_get_key(cb_inst, cookie, dockey);
+
+ /* check error */
+ if (cb_error != LCB_SUCCESS || !cookie->jobj) {
+ /* log error */
+ RERROR("failed to fetch document or parse return");
+ /* set return */
+ rcode = RLM_MODULE_FAIL;
+ /* return */
+ goto finish;
+ }
+
+ /* debugging */
+ RDEBUG3("parsed user document == %s", json_object_to_json_string(cookie->jobj));
+
+ /* inject config value pairs defined in this json oblect */
+ mod_json_object_to_value_pairs(cookie->jobj, "config", request);
+
+ /* inject reply value pairs defined in this json oblect */
+ mod_json_object_to_value_pairs(cookie->jobj, "reply", request);
+
+ finish:
+
+ /* free json object */
+ if (cookie->jobj) {
+ json_object_put(cookie->jobj);
+ cookie->jobj = NULL;
+ }
+
+ /* release handle */
+ if (handle) {
+ fr_connection_release(inst->pool, handle);
+ }
+
+ /* return */
+ return rcode;
+}
+
+#ifdef WITH_ACCOUNTING
+/** Write accounting data to Couchbase documents
+ *
+ * Handle accounting requests and store the associated data into JSON documents
+ * in couchbase mapping attribute names to JSON element names per the module configuration.
+ *
+ * When an existing document already exists for the same accounting section the new attributes
+ * will be merged with the currently existing data. When conflicts arrise the new attribute
+ * value will replace or be added to the existing value.
+ *
+ * @param instance The module instance.
+ * @param request The accounting request object.
+ * @return Returns operation status (@p rlm_rcode_t).
+ */
+static rlm_rcode_t mod_accounting(void *instance, REQUEST *request)
+{
+ rlm_couchbase_t *inst = instance; /* our module instance */
+ rlm_couchbase_handle_t *handle = NULL; /* connection pool handle */
+ rlm_rcode_t rcode = RLM_MODULE_OK; /* return code */
+ VALUE_PAIR *vp; /* radius value pair linked list */
+ char dockey[MAX_KEY_SIZE]; /* our document key */
+ char document[MAX_VALUE_SIZE]; /* our document body */
+ char element[MAX_KEY_SIZE]; /* mapped radius attribute to element name */
+ int status = 0; /* account status type */
+ int docfound = 0; /* document found toggle */
+ lcb_error_t cb_error = LCB_SUCCESS; /* couchbase error holder */
+
+ /* assert packet as not null */
+ rad_assert(request->packet != NULL);
+
+ /* sanity check */
+ if ((vp = fr_pair_find_by_num(request->packet->vps, PW_ACCT_STATUS_TYPE, 0, TAG_ANY)) == NULL) {
+ /* log debug */
+ RDEBUG("could not find status type in packet");
+ /* return */
+ return RLM_MODULE_NOOP;
+ }
+
+ /* set status */
+ status = vp->vp_integer;
+
+ /* acknowledge the request but take no action */
+ if (status == PW_STATUS_ACCOUNTING_ON || status == PW_STATUS_ACCOUNTING_OFF) {
+ /* log debug */
+ RDEBUG("handling accounting on/off request without action");
+ /* return */
+ return RLM_MODULE_OK;
+ }
+
+ /* get handle */
+ handle = fr_connection_get(inst->pool);
+
+ /* check handle */
+ if (!handle) return RLM_MODULE_FAIL;
+
+ /* set couchbase instance */
+ lcb_t cb_inst = handle->handle;
+
+ /* set cookie */
+ cookie_t *cookie = handle->cookie;
+
+ /* attempt to build document key */
+ if (radius_xlat(dockey, sizeof(dockey), request, inst->acct_key, NULL, NULL) < 0) {
+ /* log error */
+ RERROR("could not find accounting key attribute (%s) in packet", inst->acct_key);
+ /* set return */
+ rcode = RLM_MODULE_NOOP;
+ /* return */
+ goto finish;
+ }
+
+ /* attempt to fetch document */
+ cb_error = couchbase_get_key(cb_inst, cookie, dockey);
+
+ /* check error and object */
+ if (cb_error != LCB_SUCCESS || cookie->jerr != json_tokener_success || !cookie->jobj) {
+ /* log error */
+ RERROR("failed to execute get request or parse returned json object");
+ /* free and reset json object */
+ if (cookie->jobj) {
+ json_object_put(cookie->jobj);
+ cookie->jobj = NULL;
+ }
+ /* check cookie json object */
+ } else if (cookie->jobj) {
+ /* set doc found */
+ docfound = 1;
+ /* debugging */
+ RDEBUG3("parsed json body from couchbase: %s", json_object_to_json_string(cookie->jobj));
+ }
+
+ /* start json document if needed */
+ if (docfound != 1) {
+ /* debugging */
+ RDEBUG("no existing document found - creating new json document");
+ /* create new json object */
+ cookie->jobj = json_object_new_object();
+ /* set 'docType' element for new document */
+ json_object_object_add(cookie->jobj, "docType", json_object_new_string(inst->doctype));
+ /* default startTimestamp and stopTimestamp to null values */
+ json_object_object_add(cookie->jobj, "startTimestamp", NULL);
+ json_object_object_add(cookie->jobj, "stopTimestamp", NULL);
+ }
+
+ /* status specific replacements for start/stop time */
+ switch (status) {
+ case PW_STATUS_START:
+ /* add start time */
+ if ((vp = fr_pair_find_by_num(request->packet->vps, PW_EVENT_TIMESTAMP, 0, TAG_ANY)) != NULL) {
+ /* add to json object */
+ json_object_object_add(cookie->jobj, "startTimestamp",
+ mod_value_pair_to_json_object(request, vp, inst->raw_value));
+ }
+ break;
+
+ case PW_STATUS_STOP:
+ /* add stop time */
+ if ((vp = fr_pair_find_by_num(request->packet->vps, PW_EVENT_TIMESTAMP, 0, TAG_ANY)) != NULL) {
+ /* add to json object */
+ json_object_object_add(cookie->jobj, "stopTimestamp",
+ mod_value_pair_to_json_object(request, vp, inst->raw_value));
+ }
+ /* check start timestamp and adjust if needed */
+ mod_ensure_start_timestamp(cookie->jobj, request->packet->vps);
+ break;
+
+ case PW_STATUS_ALIVE:
+ /* check start timestamp and adjust if needed */
+ mod_ensure_start_timestamp(cookie->jobj, request->packet->vps);
+ break;
+
+ default:
+ /* don't doing anything */
+ rcode = RLM_MODULE_NOOP;
+ /* return */
+ goto finish;
+ }
+
+ /* loop through pairs and add to json document */
+ for (vp = request->packet->vps; vp; vp = vp->next) {
+ /* map attribute to element */
+ if (mod_attribute_to_element(vp->da->name, inst->map, &element) == 0) {
+ /* debug */
+ RDEBUG3("mapped attribute %s => %s", vp->da->name, element);
+ /* add to json object with mapped name */
+ json_object_object_add(cookie->jobj, element, mod_value_pair_to_json_object(request, vp, inst->raw_value));
+ }
+ }
+
+ /* copy json string to document and check size */
+ if (strlcpy(document, json_object_to_json_string(cookie->jobj), sizeof(document)) >= sizeof(document)) {
+ /* this isn't good */
+ RERROR("could not write json document - insufficient buffer space");
+ /* set return */
+ rcode = RLM_MODULE_FAIL;
+ /* return */
+ goto finish;
+ }
+
+ /* debugging */
+ RDEBUG3("setting '%s' => '%s'", dockey, document);
+
+ /* store document/key in couchbase */
+ cb_error = couchbase_set_key(cb_inst, dockey, document, inst->expire);
+
+ /* check return */
+ if (cb_error != LCB_SUCCESS) {
+ RERROR("failed to store document (%s): %s (0x%x)", dockey, lcb_strerror(NULL, cb_error), cb_error);
+ }
+
+finish:
+ /* free and reset json object */
+ if (cookie->jobj) {
+ json_object_put(cookie->jobj);
+ cookie->jobj = NULL;
+ }
+
+ /* release our connection handle */
+ if (handle) {
+ fr_connection_release(inst->pool, handle);
+ }
+
+ /* return */
+ return rcode;
+}
+#endif
+
+#ifdef WITH_SESSION_MGMT
+/** Check if a given user is already logged in.
+ *
+ * Process accounting data to determine if a user is already logged in. Sets request->simul_count
+ * to the current session count for this user.
+ *
+ * Check twice. If on the first pass the user exceeds his maximum number of logins, do a second
+ * pass and validate all logins by querying the terminal server.
+ *
+ * @param instance The module instance.
+ * @param request The checksimul request object.
+ * @return Returns operation status (@p rlm_rcode_t).
+ */
+static rlm_rcode_t mod_checksimul(void *instance, REQUEST *request) {
+ rlm_couchbase_t *inst = instance; /* our module instance */
+ rlm_rcode_t rcode = RLM_MODULE_OK; /* return code */
+ rlm_couchbase_handle_t *handle = NULL; /* connection pool handle */
+ char vpath[256], vkey[MAX_KEY_SIZE]; /* view path and query key */
+ char docid[MAX_KEY_SIZE]; /* document id returned from view */
+ char error[512]; /* view error return */
+ size_t idx = 0; /* row array index counter */
+ char element[MAX_KEY_SIZE]; /* mapped radius attribute to element name */
+ lcb_error_t cb_error = LCB_SUCCESS; /* couchbase error holder */
+ json_object *json, *jval; /* json object holders */
+ json_object *jrows = NULL; /* json object to hold view rows */
+ VALUE_PAIR *vp; /* value pair */
+ uint32_t client_ip_addr = 0; /* current client ip address */
+ char const *client_cs_id = NULL; /* current client calling station id */
+ char *user_name = NULL; /* user name from accounting document */
+ char *session_id = NULL; /* session id from accounting document */
+ char *cs_id = NULL; /* calling station id from accounting document */
+ fr_ipaddr_t nas_addr; /* nas address from accounting document */
+ uint32_t nas_port = 0; /* nas port from accounting document */
+ uint32_t framed_ip_addr = 0; /* framed ip address from accounting document */
+ char framed_proto = 0; /* framed proto from accounting document */
+ int session_time = 0; /* session time from accounting document */
+ int slen;
+
+ /* do nothing if this is not enabled */
+ if (inst->check_simul != true) {
+ RWDEBUG("Simultaneous-Use checking requires 'simul_count_query' to be configured");
+ return RLM_MODULE_NOOP;
+ }
+
+ /* ensure valid username in request */
+ if ((!request->username) || (request->username->vp_length == 0)) {
+ REDEBUG("Zero Length username not permitted");
+ return RLM_MODULE_INVALID;
+ }
+
+ /* attempt to build view key */
+ if (radius_xlat(vkey, sizeof(vkey), request, inst->simul_vkey, NULL, NULL) < 0) {
+ /* log error */
+ RERROR("could not find simultaneous use view key attribute (%s) in packet", inst->simul_vkey);
+ /* return */
+ return RLM_MODULE_FAIL;
+ }
+
+ /* get handle */
+ handle = fr_connection_get(inst->pool);
+
+ /* check handle */
+ if (!handle) return RLM_MODULE_FAIL;
+
+ /* set couchbase instance */
+ lcb_t cb_inst = handle->handle;
+
+ /* set cookie */
+ cookie_t *cookie = handle->cookie;
+
+ /* build view path */
+ slen = snprintf(vpath, sizeof(vpath), "%s?key=\"%s\"&stale=update_after",
+ inst->simul_view, vkey);
+ if (slen >= (int) sizeof(vpath) || slen < 0) {
+ RERROR("view path is too long");
+ return RLM_MODULE_FAIL;
+ }
+
+ /* query view for document */
+ cb_error = couchbase_query_view(cb_inst, cookie, vpath, NULL);
+
+ /* check error and object */
+ if (cb_error != LCB_SUCCESS || cookie->jerr != json_tokener_success || !cookie->jobj) {
+ /* log error */
+ RERROR("failed to execute view request or parse return");
+ /* set return */
+ rcode = RLM_MODULE_FAIL;
+ /* return */
+ goto finish;
+ }
+
+ /* debugging */
+ RDEBUG3("cookie->jobj == %s", json_object_to_json_string(cookie->jobj));
+
+ /* check for error in json object */
+ if (json_object_object_get_ex(cookie->jobj, "error", &json)) {
+ /* build initial error buffer */
+ strlcpy(error, json_object_get_string(json), sizeof(error));
+ /* get error reason */
+ if (json_object_object_get_ex(cookie->jobj, "reason", &json)) {
+ /* append divider */
+ strlcat(error, " - ", sizeof(error));
+ /* append reason */
+ strlcat(error, json_object_get_string(json), sizeof(error));
+ }
+ /* log error */
+ RERROR("view request failed with error: %s", error);
+ /* set return */
+ rcode = RLM_MODULE_FAIL;
+ /* return */
+ goto finish;
+ }
+
+ /* check for document id in return */
+ if (!json_object_object_get_ex(cookie->jobj, "rows", &json)) {
+ /* log error */
+ RERROR("failed to fetch rows from view payload");
+ /* set return */
+ rcode = RLM_MODULE_FAIL;
+ /* return */
+ goto finish;
+ }
+
+ /* get and hold rows */
+ jrows = json_object_get(json);
+
+ /* free cookie object */
+ if (cookie->jobj) {
+ json_object_put(cookie->jobj);
+ cookie->jobj = NULL;
+ }
+
+ /* check for valid row value */
+ if (!jrows || !json_object_is_type(jrows, json_type_array)) {
+ /* log error */
+ RERROR("no valid rows returned from view: %s", vpath);
+ /* set return */
+ rcode = RLM_MODULE_FAIL;
+ /* return */
+ goto finish;
+ }
+
+ /* debugging */
+ RDEBUG3("jrows == %s", json_object_to_json_string(jrows));
+
+ /* set the count */
+ request->simul_count = json_object_array_length(jrows);
+
+ /* debugging */
+ RDEBUG("found %d open sessions for %s", request->simul_count, request->username->vp_strvalue);
+
+ /* check count */
+ if (request->simul_count < request->simul_max) {
+ rcode = RLM_MODULE_OK;
+ goto finish;
+ }
+
+ /*
+ * Current session count exceeds configured maximum.
+ * Continue on to verify the sessions if configured otherwise stop here.
+ */
+ if (inst->verify_simul != true) {
+ rcode = RLM_MODULE_OK;
+ goto finish;
+ }
+
+ /* debugging */
+ RDEBUG("verifying session count");
+
+ /* reset the count */
+ request->simul_count = 0;
+
+ /* get client ip address for MPP detection below */
+ if ((vp = fr_pair_find_by_num(request->packet->vps, PW_FRAMED_IP_ADDRESS, 0, TAG_ANY)) != NULL) {
+ client_ip_addr = vp->vp_ipaddr;
+ }
+
+ /* get calling station id for MPP detection below */
+ if ((vp = fr_pair_find_by_num(request->packet->vps, PW_CALLING_STATION_ID, 0, TAG_ANY)) != NULL) {
+ client_cs_id = vp->vp_strvalue;
+ }
+
+ /* loop across all row elements */
+ for (idx = 0; idx < (size_t)json_object_array_length(jrows); idx++) {
+ /* clear docid */
+ memset(docid, 0, sizeof(docid));
+
+ /* fetch current index */
+ json = json_object_array_get_idx(jrows, idx);
+
+ /* get document id */
+ if (json_object_object_get_ex(json, "id", &jval)) {
+ /* copy and check length */
+ if (strlcpy(docid, json_object_get_string(jval), sizeof(docid)) >= sizeof(docid)) {
+ RERROR("document id from row longer than MAX_KEY_SIZE (%d)", MAX_KEY_SIZE);
+ continue;
+ }
+ }
+
+ /* check for valid doc id */
+ if (docid[0] == 0) {
+ RWARN("failed to fetch document id from row - skipping");
+ continue;
+ }
+
+ /* fetch document */
+ cb_error = couchbase_get_key(cb_inst, cookie, docid);
+
+ /* check error and object */
+ if (cb_error != LCB_SUCCESS || cookie->jerr != json_tokener_success || !cookie->jobj) {
+ /* log error */
+ RERROR("failed to execute get request or parse return");
+ /* set return */
+ rcode = RLM_MODULE_FAIL;
+ /* return */
+ goto finish;
+ }
+
+ /* debugging */
+ RDEBUG3("cookie->jobj == %s", json_object_to_json_string(cookie->jobj));
+
+ /* get element name for User-Name attribute */
+ if (mod_attribute_to_element("User-Name", inst->map, &element) == 0) {
+ /* get and check username element */
+ if (!json_object_object_get_ex(cookie->jobj, element, &jval)){
+ RDEBUG("cannot zap stale entry without username");
+ rcode = RLM_MODULE_FAIL;
+ goto finish;
+ }
+ /* copy json string value to user_name */
+ user_name = talloc_typed_strdup(request, json_object_get_string(jval));
+ } else {
+ RDEBUG("failed to find map entry for User-Name attribute");
+ rcode = RLM_MODULE_FAIL;
+ goto finish;
+ }
+
+ /* get element name for Acct-Session-Id attribute */
+ if (mod_attribute_to_element("Acct-Session-Id", inst->map, &element) == 0) {
+ /* get and check session id element */
+ if (!json_object_object_get_ex(cookie->jobj, element, &jval)){
+ RDEBUG("cannot zap stale entry without session id");
+ rcode = RLM_MODULE_FAIL;
+ goto finish;
+ }
+ /* copy json string value to session_id */
+ session_id = talloc_typed_strdup(request, json_object_get_string(jval));
+ } else {
+ RDEBUG("failed to find map entry for Acct-Session-Id attribute");
+ rcode = RLM_MODULE_FAIL;
+ goto finish;
+ }
+
+ /* get element name for NAS-IP-Address attribute */
+ if (mod_attribute_to_element("NAS-IP-Address", inst->map, &element) == 0) {
+ /* attempt to get and nas address element */
+ if (json_object_object_get_ex(cookie->jobj, element, &jval)){
+ nas_addr.af = AF_INET;
+ nas_addr.ipaddr.ip4addr.s_addr = inet_addr(json_object_get_string(jval));
+ }
+ }
+
+ /* get element name for NAS-Port attribute */
+ if (mod_attribute_to_element("NAS-Port", inst->map, &element) == 0) {
+ /* attempt to get nas port element */
+ if (json_object_object_get_ex(cookie->jobj, element, &jval)) {
+ nas_port = (uint32_t) json_object_get_int(jval);
+ }
+ }
+
+ /* check terminal server */
+ int check = rad_check_ts(&nas_addr, nas_port, user_name, session_id);
+
+ /* take action based on check return */
+ if (check == 0) {
+ /* stale record - zap it if enabled */
+ if (inst->delete_stale_sessions) {
+ /* get element name for Framed-IP-Address attribute */
+ if (mod_attribute_to_element("Framed-IP-Address", inst->map, &element) == 0) {
+ /* attempt to get framed ip address element */
+ if (json_object_object_get_ex(cookie->jobj, element, &jval)) {
+ framed_ip_addr = inet_addr(json_object_get_string(jval));
+ }
+ }
+
+ /* get element name for Framed-Port attribute */
+ if (mod_attribute_to_element("Framed-Port", inst->map, &element) == 0) {
+ /* attempt to get framed port element */
+ if (json_object_object_get_ex(cookie->jobj, element, &jval)) {
+ if (strcmp(json_object_get_string(jval), "PPP") == 0) {
+ framed_proto = 'P';
+ } else if (strcmp(json_object_get_string(jval), "SLIP") == 0) {
+ framed_proto = 'S';
+ }
+ }
+ }
+
+ /* get element name for Acct-Session-Time attribute */
+ if (mod_attribute_to_element("Acct-Session-Time", inst->map, &element) == 0) {
+ /* attempt to get session time element */
+ if (json_object_object_get_ex(cookie->jobj, element, &jval)) {
+ session_time = json_object_get_int(jval);
+ }
+ }
+
+ /* zap session */
+ session_zap(request, &nas_addr, nas_port, user_name, session_id,
+ framed_ip_addr, framed_proto, session_time);
+ }
+ } else if (check == 1) {
+ /* user is still logged in - increase count */
+ ++request->simul_count;
+
+ /* get element name for Framed-IP-Address attribute */
+ if (mod_attribute_to_element("Framed-IP-Address", inst->map, &element) == 0) {
+ /* attempt to get framed ip address element */
+ if (json_object_object_get_ex(cookie->jobj, element, &jval)) {
+ framed_ip_addr = inet_addr(json_object_get_string(jval));
+ } else {
+ /* ensure 0 if not found */
+ framed_ip_addr = 0;
+ }
+ }
+
+ /* get element name for Calling-Station-Id attribute */
+ if (mod_attribute_to_element("Calling-Station-Id", inst->map, &element) == 0) {
+ /* attempt to get framed ip address element */
+ if (json_object_object_get_ex(cookie->jobj, element, &jval)) {
+ /* copy json string value to cs_id */
+ cs_id = talloc_typed_strdup(request, json_object_get_string(jval));
+ } else {
+ /* ensure null if not found */
+ cs_id = NULL;
+ }
+ }
+
+ /* Does it look like a MPP attempt? */
+ if (client_ip_addr && framed_ip_addr && framed_ip_addr == client_ip_addr) {
+ request->simul_mpp = 2;
+ } else if (client_cs_id && cs_id && !strncmp(cs_id, client_cs_id, 16)) {
+ request->simul_mpp = 2;
+ }
+
+ } else {
+ /* check failed - return error */
+ REDEBUG("failed to check the terminal server for user '%s'", user_name);
+ rcode = RLM_MODULE_FAIL;
+ goto finish;
+ }
+
+ /* free and reset document user name talloc */
+ if (user_name) TALLOC_FREE(user_name);
+
+ /* free and reset document calling station id talloc */
+ if (cs_id) TALLOC_FREE(cs_id);
+
+ /* free and reset document session id talloc */
+ if (session_id) TALLOC_FREE(session_id);
+
+ /* free and reset json object before fetching next row */
+ if (cookie->jobj) {
+ json_object_put(cookie->jobj);
+ cookie->jobj = NULL;
+ }
+ }
+
+ /* debugging */
+ RDEBUG("Retained %d open sessions for %s after verification",
+ request->simul_count, request->username->vp_strvalue);
+
+finish:
+ if (user_name) talloc_free(user_name);
+ if (cs_id) talloc_free(cs_id);
+ if (session_id) talloc_free(session_id);
+
+ /* free rows */
+ if (jrows) json_object_put(jrows);
+
+ /* free and reset json object */
+ if (cookie->jobj) {
+ json_object_put(cookie->jobj);
+ cookie->jobj = NULL;
+ }
+
+ if (handle) fr_connection_release(inst->pool, handle);
+
+ /*
+ * The Auth module apparently looks at request->simul_count,
+ * not the return value of this module when deciding to deny
+ * a call for too many sessions.
+ */
+ return rcode;
+}
+#endif
+
+/** Detach the module
+ *
+ * Detach the module instance and free any allocated resources.
+ *
+ * @param instance The module instance.
+ * @return Returns 0 (success) in all conditions.
+ */
+static int mod_detach(void *instance)
+{
+ rlm_couchbase_t *inst = instance;
+
+ if (inst->map) json_object_put(inst->map);
+ if (inst->pool) fr_connection_pool_free(inst->pool);
+
+ return 0;
+}
+
+/*
+ * Hook into the FreeRADIUS module system.
+ */
+extern module_t rlm_couchbase;
+module_t rlm_couchbase = {
+ .magic = RLM_MODULE_INIT,
+ .name = "couchbase",
+ .type = RLM_TYPE_THREAD_SAFE,
+ .inst_size = sizeof(rlm_couchbase_t),
+ .config = module_config,
+ .instantiate = mod_instantiate,
+ .detach = mod_detach,
+ .methods = {
+ [MOD_AUTHORIZE] = mod_authorize,
+#ifdef WITH_ACCOUNTING
+ [MOD_ACCOUNTING] = mod_accounting,
+#endif
+#ifdef WITH_SESSION_MGMT
+ [MOD_SESSION] = mod_checksimul
+#endif
+ },
+};