diff options
Diffstat (limited to '')
| -rw-r--r-- | src/tests/unit/rfc.txt | 204 |
1 files changed, 204 insertions, 0 deletions
diff --git a/src/tests/unit/rfc.txt b/src/tests/unit/rfc.txt new file mode 100644 index 0000000..8e95526 --- /dev/null +++ b/src/tests/unit/rfc.txt @@ -0,0 +1,204 @@ +# All attribute lengths are implicit, and are calculated automatically +# +# Input is of the form: +# +# WORD ... +# +# The WORD is a keyword which indicates the format of the following text. +# WORD is one of: +# +# raw - read the grammar defined below, and encode an attribute. +# The grammar supports a trivial way of describing RADIUS +# attributes, without reference to dictionaries or fancy +# parsers +# +# encode - reads "Attribute-Name = value", encodes it, and prints +# the result as text. +# use "-" to encode the output of the last command +# +# decode - reads hex, and decodes it "Attribute-Name = value" +# use "-" to decode the output of the last command +# +# data - the expected output of the previous command, in ASCII form. +# if the actual command output is different, an error message +# is produced, and the program terminates. +# +# +# The "raw" input satisfies the following grammar: +# +# Identifier = 1*DIGIT *( "." 1*DIGIT ) +# +# HEXCHAR = HEXDIG HEXDIG +# +# STRING = DQUOTE *CHAR DQUOTE +# +# TLV = "{" 1*DIGIT DATA "}" +# +# DATA = 1*HEXCHAR / 1*TLV / STRING +# +# LINE = Identifier DATA +# +# The "Identifier" is a RADIUS attribute identifier, as given in the draft. +# +# e.g. 1 for User-Name +# 26.9.1 Vendor-Specific, Cisco, Cisco-AVPAir +# 241.1 Extended Attribute, number 1 +# 241.2.3 Extended Attribute 2, data type TLV, TLV type 3 +# etc. +# +# The "DATA" portion is the contents of the RADIUS Attribute. +# +# 123456789abcdef hex string +# 12 34 56 ab with spaces for clarity +# "hello" Text string +# { 1 abcdef } TLV, TLV-Type 1, data "abcdef" +# +# TLVs can be nested: +# +# { tlv-type { tlv-type data } } { 3 { 4 01020304 } } +# +# TLVs can be concatencated +# +# {tlv-type data } { tlv-type data} { 3 040506 } { 8 aabbcc } +# +# The "raw" data is encoded without reference to dictionaries. Any +# valid string is parsed to a RADIUS attribute. The resulting RADIUS +# attribute *may not* be correctly formatted to the relevant RADIUS +# specifications. i.e. you can use this tool to create attribute 1 +# (User-Name), which is encoded as a series of TLVs. That's up to you. +# +# The purpose of the "raw" command is to have a simple way of encoding +# attributes which is independent of any dictionaries or packet processing +# routines. +# +# The output data is the hex version of the encoded attribute. +# + +encode User-Name = "bob" +data 01 05 62 6f 62 + +decode - +data User-Name = "bob" + +decode 01 05 62 6f 62 +data User-Name = "bob" + +# +# The Type/Length is OK, but the attribute data is of the wrong size. +# +decode 04 04 ab cd +data Attr-4 = 0xabcd + +# Zero-length attributes +decode 01 02 +data + +# don't encode zero-length attributes +encode User-Name = "" +data + +# except for CUI. Thank you, WiMAX! +decode 59 02 +data Chargeable-User-Identity = 0x + +# Hah! Thought you had it figured out, didn't you? +encode - +data 59 02 + +attribute Framed-IP-Address = 127.0.0.1/32 +data Framed-IP-Address = 127.0.0.1 + +attribute Framed-IP-Address = 127.0.0.1/323 +data Invalid IPv4 mask length "/323". Should be between 0-32 + +attribute Framed-IP-Address = 127.0.0.1/30 +data Invalid IPv4 mask length "/30". Only "/32" permitted for non-prefix types + +attribute Framed-IP-Address = * +data Framed-IP-Address = 0.0.0.0 + +attribute Framed-IP-Address = 127 +data Framed-IP-Address = 0.0.0.127 + +attribute Framed-IP-Address = 127.0 +data Framed-IP-Address = 127.0.0.0 + +attribute Framed-IPv6-Prefix = ::1 +data Framed-IPv6-Prefix = ::1/128 + +attribute Framed-IPv6-Prefix = ::1/200 +data Invalid IPv6 mask length "/200". Should be between 0-128 + +attribute Framed-IPv6-Prefix = ::1/200 +data Invalid IPv6 mask length "/200". Should be between 0-128 + +attribute Framed-IPv6-Prefix = 11:22:33:44:55:66:77:88/128 +data Framed-IPv6-Prefix = 11:22:33:44:55:66:77:88/128 + +attribute Framed-IPv6-Prefix = * +data Framed-IPv6-Prefix = ::/128 + +attribute PMIP6-Home-IPv4-HoA = 127/8 +data PMIP6-Home-IPv4-HoA = 127.0.0.0/8 + +attribute PMIP6-Home-IPv4-HoA = 127/8 +data PMIP6-Home-IPv4-HoA = 127.0.0.0/8 + +# +# Octets outside of the mask are OK, but +# are mashed to zero. +# +attribute PMIP6-Home-IPv4-HoA = 127.63/8 +data PMIP6-Home-IPv4-HoA = 127.0.0.0/8 + +# +# Unless you give a good mask. +# +attribute PMIP6-Home-IPv4-HoA = 127.63/16 +data PMIP6-Home-IPv4-HoA = 127.63.0.0/16 + +attribute PMIP6-Home-IPv4-HoA = 127.999/16 +data Failed to parse IPv4 address string "127.999/16" + +attribute PMIP6-Home-IPv4-HoA = 127.bob/16 +data Failed to parse IPv4 address string "127.bob/16" + +attribute PMIP6-Home-IPv4-HoA = 127.63/15 +data PMIP6-Home-IPv4-HoA = 127.62.0.0/15 + +attribute PMIP6-Home-IPv4-HoA = 127.63.1/24 +data PMIP6-Home-IPv4-HoA = 127.63.1.0/24 + +attribute PMIP6-Home-IPv4-HoA = 127.63.1.6 +data PMIP6-Home-IPv4-HoA = 127.63.1.6/32 + +attribute PMIP6-Home-IPv4-HoA = 256/8 +data Failed to parse IPv4 address string "256/8" + +attribute PMIP6-Home-IPv4-HoA = bob/8 +data Failed to parse IPv4 address string "bob/8" + +# +# A "concat" attribute, with no data +# +decode 89 02 +data PKM-SS-Cert = 0x + +# +# The configuration can use the old names, but they +# get automatically converted to the new names. +# +attribute User-Service-Type = 1 +data Service-Type = Login-User + +# +# Or with weirdly formatted data +# +decode 89 03 ff 89 02 89 03 fe +data PKM-SS-Cert = 0xfffe + +$INCLUDE tunnel.txt +$INCLUDE errors.txt +$INCLUDE extended.txt +$INCLUDE lucent.txt +$INCLUDE wimax.txt |