From 50b37d4a27d3295a29afca2286f1a5a086142cec Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 28 Apr 2024 11:49:46 +0200 Subject: Adding upstream version 3.2.1+dfsg. Signed-off-by: Daniel Baumann --- doc/modules/rlm_sqlcounter | 182 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 182 insertions(+) create mode 100644 doc/modules/rlm_sqlcounter (limited to 'doc/modules/rlm_sqlcounter') diff --git a/doc/modules/rlm_sqlcounter b/doc/modules/rlm_sqlcounter new file mode 100644 index 0000000..54ad170 --- /dev/null +++ b/doc/modules/rlm_sqlcounter @@ -0,0 +1,182 @@ +rlm_sqlcounter installation and running guide +by Ram Narula ram@princess1.net +Internet for Education (Thailand) + +*) Pre-requisites: +Make sure to have configured radiusd with rlm_sqlcounter +installed + +> make clean +> ./configure --with-experimental-modules +> make +> make install + +Make sure to have radiusd running properly under sql +and there must be a "sql" entry under accounting{ } section +of radiusd.conf + +*) Configuration: + +[1] Create a text file called sqlcounter.conf in the same +directory where radiusd.conf resides (usually /usr/local/etc/raddb) +with the following content (for mysql): + +#-----# +sqlcounter noresetcounter { + sql_module_instance = sqlcca3 + counter_name = Max-All-Session-Time + check_name = Max-All-Session + reply_name = Session-Timeout + key = User-Name + reset = never + + query = "SELECT SUM(AcctSessionTime) FROM radacct WHERE UserName='%{%k}'" + + } + + +sqlcounter dailycounter { + sql_module_instance = sqlcca3 + driver = "rlm_sqlcounter" + counter_name = Daily-Session-Time + check_name = Max-Daily-Session + reply_name = Session-Timeout + key = User-Name + reset = daily + + query = "SELECT SUM(AcctSessionTime - GREATEST((%b - UNIX_TIMESTAMP(AcctStartTime)), 0)) FROM radacct WHERE UserName='%{%k}' AND UNIX_TIMESTAMP(AcctStartTime) + AcctSessionTime > '%b'" + + } + +sqlcounter monthlycounter { + sql_module_instance = sqlcca3 + counter_name = Monthly-Session-Time + check_name = Max-Monthly-Session + reply_name = Session-Timeout + key = User-Name + reset = monthly + + query = "SELECT SUM(AcctSessionTime - GREATEST((%b - UNIX_TIMESTAMP(AcctStartTime)), 0)) FROM radacct WHERE UserName='%{%k}' AND UNIX_TIMESTAMP(AcctStartTime) + AcctSessionTime > '%b'" + + } + +#-----# + +The respective lines for postgresql are: + +query = "SELECT SUM(AcctSessionTime) FROM radacct WHERE UserName='%{%k}'" +query = "SELECT SUM(AcctSessionTime - GREATEST((%b - EXTRACT(epoch FROM AcctStartTime)), 0)) FROM radacct WHERE UserName='%{%k}' AND EXTRACT(epoch FROM AcctStartTime) + AcctSessionTime > '%b'" +query = "SELECT SUM(AcctSessionTime - GREATEST((%b - EXTRACT(epoch FROM AcctStartTime)), 0)) FROM radacct WHERE UserName='%{%k}' AND EXTRACT(epoch FROM AcctStartTime) + AcctSessionTime > '%b'" + +If you are running postgres 7.x, you may not have a GREATEST function. + +An example of one is: + +CREATE OR REPLACE FUNCTION "greater"(integer, integer) RETURNS integer AS ' +DECLARE + res INTEGER; + one INTEGER := 0; + two INTEGER := 0; +BEGIN + one = $1; + two = $2; + IF one IS NULL THEN + one = 0; + END IF; + IF two IS NULL THEN + two = 0; + END IF; + IF one > two THEN + res := one; + ELSE + res := two; + END IF; + RETURN res; +END; +' LANGUAGE 'plpgsql'; + +[2] Include the above file to radiusd.conf by adding a line in +modules{ } section + +modules { + +$INCLUDE ${confdir}/sqlcounter.conf + +...some other entries here... + +[3] Make sure to have the sqlcounter names under authorize section +like the followings: + +authorize { +...some entries here... +...some entries here... +...some entries here... +...some entries here... + +noresetcounter +dailycounter +monthlycounter +} + +noresetcounter: the counter that never resets, can be used +for real session-time cumulation + +dailycounter: the counter that resets everyday, can be used +for limiting daily access time (eg. 3 hours a day) + +monthlycounter: the counter that resets monthly, can be used for +limiting monthly access time (eg. 50 hours per month) + +You can make your own names and directives for resetting the counter +by reading the sample sqlcounter configuration in +raddb/experimental.conf + + + +*) Implementation: + +Add sqlcounter names to be used into radcheck or radgroupcheck +table appropriately for sql. For users file just follow the +example below. + +Note: The users in the example below must be able to login +normally as the example will only show how to apply sqlcounter +counters. + +Scenarios +[1] username test0001 have total time limit of 15 hours +(user can login as many times as needed but can be online for +total time of 15 hours which is 54000 seconds) +If using normal users file authentication the entry can look like: + +test0001 Max-All-Session := 54000, User-Password == "blah" + Service-Type = Framed-User, + Framed-Protocol = PPP + +or for sql make sure to have Max-All-Session entry under either +radcheck or radgroup check table: +> INSERT into radcheck VALUES ('','test0001','Max-All-Session','54000',':='); + +[2] username test0002 have total time limit of 3 hours a day + +test0002 Max-Daily-Session := 10800, User-Password == "blah" + Service-Type = Framed-User, + Framed-Protocol = PPP +or in sql: +> INSERT into radcheck VALUES ('','test0002','Max-Daily-Session','10800',':='); + + +[3] username test0003 have total time limit of 90 hours a month + +test0003 Max-Monthly-Session := 324000, User-Password == "blah" + Service-Type = Framed-User, + Framed-Protocol = PPP +in sql: +> INSERT into radcheck VALUES ('','test0003','Max-Monthly-Session','10800',':='); + + +Note that Max-All-Session, Max-Daily-Session and Max-Monthly-Session are +definied in sqlcounter.conf + +VERY IMPORTANT: +Accounting must be done via sql or this will not work. -- cgit v1.2.3