Adding upstream version 8.4.4.upstream/8.4.4upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 308 insertions, 0 deletions

diff --git a/tests/topotests/bgp_update_delay/test_bgp_update_delay.py b/tests/topotests/bgp_update_delay/test_bgp_update_delay.py
new file mode 100644
index 0000000..1c00c49
--- /dev/null
+++ b/tests/topotests/bgp_update_delay/test_bgp_update_delay.py
@@ -0,0 +1,308 @@
+#!/usr/bin/env python
+
+#
+# test_bgp_update_delay.py
+# Part of NetDEF Topology Tests
+#
+# Copyright (c) 2019 by
+# Don Slice <dslice@nvidia.com>
+#
+# Permission to use, copy, modify, and/or distribute this software
+# for any purpose with or without fee is hereby granted, provided
+# that the above copyright notice and this permission notice appear
+# in all copies.
+#
+# THE SOFTWARE IS PROVIDED "AS IS" AND NETDEF DISCLAIMS ALL WARRANTIES
+# WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL NETDEF BE LIABLE FOR
+# ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY
+# DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
+# WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS
+# ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
+# OF THIS SOFTWARE.
+#
+
+"""
+Test the ability to define update-delay to delay bestpath, rib install
+and advertisement to peers when frr is started, restarted or "clear ip
+bgp *" is performed. Test both the vrf-specific and global configuration
+and operation.
+
+r1
+|
+r2----r3
+| \
+|  \
+r5  r4
+
+
+r2 is UUT and peers with r1, r3, and r4 in default bgp instance.
+r2 peers with r5 in vrf vrf1.
+
+Check r2 initial convergence in default table
+Define update-delay with max-delay in the default bgp instance on r2
+Shutdown peering on r1 toward r2 so that delay timers can be exercised
+Clear bgp neighbors on r2 and then check for the 'in progress' indicator
+Check that r2 only installs route learned from r4 after the max-delay timer expires
+Define update-delay with max-delay and estabish-wait and check json output showing set
+Clear neighbors on r2 and check that r3 installs route from r4 after establish-wait time
+Remove update-delay timer on r2 to verify that it goes back to normal behavior
+Clear neighbors on r2 and check that route install time on r2 does not delay
+Define global bgp update-delay with max-delay and establish-wait on r2
+Check that r2 default instance and vrf1 have the max-delay and establish set
+Clear neighbors on r2 and check route-install time is after the establish-wait timer
+
+Note that the keepalive/hold times were changed to 3/9 and the connect retry timer
+to 10 to improve the odds the convergence timing in this test case is useful in the
+event of packet loss.
+"""
+
+import os
+import sys
+import json
+import pytest
+import functools
+
+CWD = os.path.dirname(os.path.realpath(__file__))
+sys.path.append(os.path.join(CWD, "../"))
+
+# pylint: disable=C0413
+from lib import topotest
+from lib.topogen import Topogen, TopoRouter, get_topogen
+
+pytestmark = [pytest.mark.bgpd]
+
+
+CWD = os.path.dirname(os.path.realpath(__file__))
+
+
+def build_topo(tgen):
+    for routern in range(1, 6):
+        tgen.add_router("r{}".format(routern))
+
+    switch = tgen.add_switch("s1")
+    switch.add_link(tgen.gears["r1"])
+    switch.add_link(tgen.gears["r2"])
+
+    switch = tgen.add_switch("s2")
+    switch.add_link(tgen.gears["r2"])
+    switch.add_link(tgen.gears["r3"])
+
+    switch = tgen.add_switch("s3")
+    switch.add_link(tgen.gears["r2"])
+    switch.add_link(tgen.gears["r4"])
+
+    switch = tgen.add_switch("s4")
+    switch.add_link(tgen.gears["r2"])
+    switch.add_link(tgen.gears["r5"])
+
+
+def setup_module(mod):
+    tgen = Topogen(build_topo, mod.__name__)
+    tgen.start_topology()
+
+    router_list = tgen.routers()
+
+    for i, (rname, router) in enumerate(router_list.items(), 1):
+        router.load_config(
+            TopoRouter.RD_ZEBRA, os.path.join(CWD, "{}/zebra.conf".format(rname))
+        )
+        router.load_config(
+            TopoRouter.RD_BGP, os.path.join(CWD, "{}/bgpd.conf".format(rname))
+        )
+
+    tgen.start_router()
+
+
+def teardown_module(mod):
+    tgen = get_topogen()
+    tgen.stop_topology()
+
+
+def test_bgp_update_delay():
+    tgen = get_topogen()
+
+    if tgen.routers_have_failure():
+        pytest.skip(tgen.errors)
+
+    router1 = tgen.gears["r1"]
+    router2 = tgen.gears["r2"]
+    router3 = tgen.gears["r3"]
+
+    # initial convergence without update-delay defined
+    def _bgp_converge(router):
+        output = json.loads(router.vtysh_cmd("show ip bgp neighbor 192.168.255.2 json"))
+        expected = {
+            "192.168.255.2": {
+                "bgpState": "Established",
+                "addressFamilyInfo": {"ipv4Unicast": {"acceptedPrefixCounter": 2}},
+            }
+        }
+        return topotest.json_cmp(output, expected)
+
+    def _bgp_check_update_delay(router):
+        output = json.loads(router.vtysh_cmd("show ip bgp sum json"))
+        expected = {"ipv4Unicast": {"updateDelayLimit": 20}}
+
+        return topotest.json_cmp(output, expected)
+
+    def _bgp_check_update_delay_in_progress(router):
+        output = json.loads(router.vtysh_cmd("show ip bgp sum json"))
+        expected = {"ipv4Unicast": {"updateDelayInProgress": True}}
+
+        return topotest.json_cmp(output, expected)
+
+    def _bgp_check_route_install(router):
+        output = json.loads(router.vtysh_cmd("show ip route 172.16.253.254/32 json"))
+        expected = {"172.16.253.254/32": [{"protocol": "bgp"}]}
+
+        return topotest.json_cmp(output, expected)
+
+    def _bgp_check_update_delay_and_wait(router):
+        output = json.loads(router.vtysh_cmd("show ip bgp sum json"))
+        expected = {
+            "ipv4Unicast": {"updateDelayLimit": 20, "updateDelayEstablishWait": 10}
+        }
+
+        return topotest.json_cmp(output, expected)
+
+    def _bgp_check_update_delay(router):
+        output = json.loads(router.vtysh_cmd("show ip bgp sum json"))
+        expected = {"ipv4Unicast": {"updateDelayLimit": 20}}
+
+        return topotest.json_cmp(output, expected)
+
+    def _bgp_check_vrf_update_delay_and_wait(router):
+        output = json.loads(router.vtysh_cmd("show ip bgp vrf vrf1 sum json"))
+        expected = {
+            "ipv4Unicast": {"updateDelayLimit": 20, "updateDelayEstablishWait": 10}
+        }
+
+        return topotest.json_cmp(output, expected)
+
+    # Check r2 initial convergence in default table
+    test_func = functools.partial(_bgp_converge, router2)
+    success, result = topotest.run_and_expect(test_func, None, count=30, wait=1)
+
+    assert result is None, 'Failed bgp convergence in "{}"'.format(router2)
+
+    # Define update-delay with max-delay in the default bgp instance on r2
+    router2.vtysh_cmd(
+        """
+          configure terminal
+            router bgp 65002
+              update-delay 20
+        """
+    )
+
+    # Shutdown peering on r1 toward r2 so that delay timers can be exercised
+    router1.vtysh_cmd(
+        """
+          configure terminal
+            router bgp 65001
+              neighbor 192.168.255.1 shut
+        """
+    )
+
+    # Clear bgp neighbors on r2 and then check for the 'in progress' indicator
+    router2.vtysh_cmd("""clear ip bgp *""")
+
+    test_func = functools.partial(_bgp_check_update_delay_in_progress, router2)
+    success, result = topotest.run_and_expect(test_func, None, count=30, wait=1)
+
+    assert result is None, 'Failed to set update-delay max-delay timer "{}"'.format(
+        router2
+    )
+
+    # Check that r2 only installs route learned from r4 after the max-delay timer expires
+    test_func = functools.partial(_bgp_check_route_install, router2)
+    success, result = topotest.run_and_expect(test_func, None, count=30, wait=1)
+
+    assert result is None, 'Failed to install route after update-delay "{}"'.format(
+        router2
+    )
+
+    # Define update-delay with max-delay and estabish-wait and check json output showing set
+    router2.vtysh_cmd(
+        """
+          configure terminal
+            router bgp 65002
+              update-delay 20 10
+        """
+    )
+
+    test_func = functools.partial(_bgp_check_update_delay_and_wait, router2)
+    success, result = topotest.run_and_expect(test_func, None, count=30, wait=1)
+
+    assert (
+        result is None
+    ), 'Failed to set max-delay and establish-weight timers in "{}"'.format(router2)
+
+    # Define update-delay with max-delay and estabish-wait and check json output showing set
+    router2.vtysh_cmd("""clear ip bgp *""")
+
+    test_func = functools.partial(_bgp_check_route_install, router3)
+    success, result = topotest.run_and_expect(test_func, None, count=30, wait=1)
+
+    assert (
+        result is None
+    ), 'Failed to installed advertised route after establish-wait timer espired "{}"'.format(
+        router2
+    )
+
+    # Remove update-delay timer on r2 to verify that it goes back to normal behavior
+    router2.vtysh_cmd(
+        """
+          configure terminal
+            router bgp 65002
+              no update-delay
+        """
+    )
+
+    # Clear neighbors on r2 and check that route install time on r2 does not delay
+    router2.vtysh_cmd("""clear ip bgp *""")
+
+    test_func = functools.partial(_bgp_check_route_install, router2)
+    success, result = topotest.run_and_expect(test_func, None, count=30, wait=1)
+
+    assert result is None, 'Failed to remove update-delay delay timing "{}"'.format(
+        router2
+    )
+
+    # Define global bgp update-delay with max-delay and establish-wait on r2
+    router2.vtysh_cmd(
+        """
+          configure terminal
+            bgp update-delay 20 10
+        """
+    )
+
+    # Check that r2 default instance and vrf1 have the max-delay and establish set
+    test_func = functools.partial(_bgp_check_update_delay_and_wait, router2)
+    success, result = topotest.run_and_expect(test_func, None, count=30, wait=1)
+
+    assert result is None, 'Failed to set update-delay in default instance "{}"'.format(
+        router2
+    )
+
+    test_func = functools.partial(_bgp_check_vrf_update_delay_and_wait, router2)
+    success, result = topotest.run_and_expect(test_func, None, count=30, wait=1)
+
+    assert result is None, 'Failed to set update-delay in vrf1 "{}"'.format(router2)
+
+    # Clear neighbors on r2 and check route-install time is after the establish-wait timer
+    router2.vtysh_cmd("""clear ip bgp *""")
+
+    test_func = functools.partial(_bgp_check_route_install, router3)
+    success, result = topotest.run_and_expect(test_func, None, count=30, wait=1)
+
+    assert (
+        result is None
+    ), 'Failed to installed advertised route after establish-wait timer espired "{}"'.format(
+        router2
+    )
+
+
+if __name__ == "__main__":
+    args = ["-s"] + sys.argv[1:]
+    sys.exit(pytest.main(args))