diff options
Diffstat (limited to 'lib/link_state.h')
| -rw-r--r-- | lib/link_state.h | 1131 |
1 files changed, 1131 insertions, 0 deletions
diff --git a/lib/link_state.h b/lib/link_state.h new file mode 100644 index 0000000..ed31545 --- /dev/null +++ b/lib/link_state.h @@ -0,0 +1,1131 @@ +/* + * Link State Database definition - ted.h + * + * Author: Olivier Dugeon <olivier.dugeon@orange.com> + * + * Copyright (C) 2020 Orange http://www.orange.com + * + * This file is part of Free Range Routing (FRR). + * + * FRR is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * FRR is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; see the file COPYING; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _FRR_LINK_STATE_H_ +#define _FRR_LINK_STATE_H_ + +#include "typesafe.h" + +#ifdef __cplusplus +extern "C" { +#endif + +/** + * This file defines the model used to implement a Link State Database + * suitable to be used by various protocol like RSVP-TE, BGP-LS, PCEP ... + * This database is normally fulfill by the link state routing protocol, + * commonly OSPF or ISIS, carrying Traffic Engineering information within + * Link State Attributes. See, RFC3630.(OSPF-TE) and RFC5305 (ISIS-TE). + * + * At least, 3 types of Link State structure are defined: + * - Link State Node that groups all information related to a node + * - Link State Attributes that groups all information related to a link + * - Link State Prefix that groups all information related to a prefix + * + * These 3 types of structures are those handled by BGP-LS (see RFC7752). + * + * Each structure, in addition to the specific parameters, embed the node + * identifier which advertises the Link State and a bit mask as flags to + * indicates which parameters are valid i.e. for which the value corresponds + * to a Link State information convey by the routing protocol. + * Node identifier is composed of the route id as IPv4 address plus the area + * id for OSPF and the ISO System id plus the IS-IS level for IS-IS. + */ + +/* external reference */ +struct zapi_opaque_reg_info; +struct zclient; + +/* Link State Common definitions */ +#define MAX_NAME_LENGTH 256 +#define ISO_SYS_ID_LEN 6 + +/* Type of Node */ +enum ls_node_type { + NONE = 0, /* Unknown */ + STANDARD, /* a P or PE node */ + ABR, /* an Array Border Node */ + ASBR, /* an Autonomous System Border Node */ + RMT_ASBR, /* Remote ASBR */ + PSEUDO /* a Pseudo Node */ +}; + +/* Origin of the Link State information */ +enum ls_origin { UNKNOWN = 0, ISIS_L1, ISIS_L2, OSPFv2, DIRECT, STATIC }; + +/** + * Link State Node Identifier as: + * - IPv4 address + Area ID for OSPF + * - ISO System ID + ISIS Level for ISIS + */ +struct ls_node_id { + enum ls_origin origin; /* Origin of the LS information */ + union { + struct { + struct in_addr addr; /* OSPF Router IS */ + struct in_addr area_id; /* OSPF Area ID */ + } ip; + struct { + uint8_t sys_id[ISO_SYS_ID_LEN]; /* ISIS System ID */ + uint8_t level; /* ISIS Level */ + uint8_t padding; + } iso; + } id; +}; + +/** + * Check if two Link State Node IDs are equal. Note that this routine has the + * same return value sense as '==' (which is different from a comparison). + * + * @param i1 First Link State Node Identifier + * @param i2 Second Link State Node Identifier + * @return 1 if equal, 0 otherwise + */ +extern int ls_node_id_same(struct ls_node_id i1, struct ls_node_id i2); + +/* Link State flags to indicate which Node parameters are valid */ +#define LS_NODE_UNSET 0x0000 +#define LS_NODE_NAME 0x0001 +#define LS_NODE_ROUTER_ID 0x0002 +#define LS_NODE_ROUTER_ID6 0x0004 +#define LS_NODE_FLAG 0x0008 +#define LS_NODE_TYPE 0x0010 +#define LS_NODE_AS_NUMBER 0x0020 +#define LS_NODE_SR 0x0040 +#define LS_NODE_SRLB 0x0080 +#define LS_NODE_MSD 0x0100 + +/* Link State Node structure */ +struct ls_node { + uint16_t flags; /* Flag for parameters validity */ + struct ls_node_id adv; /* Adv. Router of this Link State */ + char name[MAX_NAME_LENGTH]; /* Name of the Node (IS-IS only) */ + struct in_addr router_id; /* IPv4 Router ID */ + struct in6_addr router_id6; /* IPv6 Router ID */ + uint8_t node_flag; /* IS-IS or OSPF Node flag */ + enum ls_node_type type; /* Type of Node */ + uint32_t as_number; /* Local or neighbor AS number */ + struct ls_srgb { /* Segment Routing Global Block */ + uint32_t lower_bound; /* MPLS label lower bound */ + uint32_t range_size; /* MPLS label range size */ + uint8_t flag; /* IS-IS SRGB flags */ + } srgb; + struct ls_srlb { /* Segment Routing Local Block */ + uint32_t lower_bound; /* MPLS label lower bound */ + uint32_t range_size; /* MPLS label range size */ + } srlb; + uint8_t algo[2]; /* Segment Routing Algorithms */ + uint8_t msd; /* Maximum Stack Depth */ +}; + +/* Link State flags to indicate which Attribute parameters are valid */ +#define LS_ATTR_UNSET 0x00000000 +#define LS_ATTR_NAME 0x00000001 +#define LS_ATTR_METRIC 0x00000002 +#define LS_ATTR_TE_METRIC 0x00000004 +#define LS_ATTR_ADM_GRP 0x00000008 +#define LS_ATTR_LOCAL_ADDR 0x00000010 +#define LS_ATTR_NEIGH_ADDR 0x00000020 +#define LS_ATTR_LOCAL_ADDR6 0x00000040 +#define LS_ATTR_NEIGH_ADDR6 0x00000080 +#define LS_ATTR_LOCAL_ID 0x00000100 +#define LS_ATTR_NEIGH_ID 0x00000200 +#define LS_ATTR_MAX_BW 0x00000400 +#define LS_ATTR_MAX_RSV_BW 0x00000800 +#define LS_ATTR_UNRSV_BW 0x00001000 +#define LS_ATTR_REMOTE_AS 0x00002000 +#define LS_ATTR_REMOTE_ADDR 0x00004000 +#define LS_ATTR_REMOTE_ADDR6 0x00008000 +#define LS_ATTR_DELAY 0x00010000 +#define LS_ATTR_MIN_MAX_DELAY 0x00020000 +#define LS_ATTR_JITTER 0x00040000 +#define LS_ATTR_PACKET_LOSS 0x00080000 +#define LS_ATTR_AVA_BW 0x00100000 +#define LS_ATTR_RSV_BW 0x00200000 +#define LS_ATTR_USE_BW 0x00400000 +#define LS_ATTR_ADJ_SID 0x01000000 +#define LS_ATTR_BCK_ADJ_SID 0x02000000 +#define LS_ATTR_ADJ_SID6 0x04000000 +#define LS_ATTR_BCK_ADJ_SID6 0x08000000 +#define LS_ATTR_SRLG 0x10000000 + +/* Link State Attributes */ +struct ls_attributes { + uint32_t flags; /* Flag for parameters validity */ + struct ls_node_id adv; /* Adv. Router of this Link State */ + char name[MAX_NAME_LENGTH]; /* Name of the Edge. Could be null */ + uint32_t metric; /* IGP standard metric */ + struct ls_standard { /* Standard TE metrics */ + uint32_t te_metric; /* Traffic Engineering metric */ + uint32_t admin_group; /* Administrative Group */ + struct in_addr local; /* Local IPv4 address */ + struct in_addr remote; /* Remote IPv4 address */ + struct in6_addr local6; /* Local IPv6 address */ + struct in6_addr remote6; /* Remote IPv6 address */ + uint32_t local_id; /* Local Identifier */ + uint32_t remote_id; /* Remote Identifier */ + float max_bw; /* Maximum Link Bandwidth */ + float max_rsv_bw; /* Maximum Reservable BW */ + float unrsv_bw[8]; /* Unreserved BW per CT (8) */ + uint32_t remote_as; /* Remote AS number */ + struct in_addr remote_addr; /* Remote IPv4 address */ + struct in6_addr remote_addr6; /* Remote IPv6 address */ + } standard; + struct ls_extended { /* Extended TE Metrics */ + uint32_t delay; /* Unidirectional average delay */ + uint32_t min_delay; /* Unidirectional minimum delay */ + uint32_t max_delay; /* Unidirectional maximum delay */ + uint32_t jitter; /* Unidirectional delay variation */ + uint32_t pkt_loss; /* Unidirectional packet loss */ + float ava_bw; /* Available Bandwidth */ + float rsv_bw; /* Reserved Bandwidth */ + float used_bw; /* Utilized Bandwidth */ + } extended; +#define ADJ_PRI_IPV4 0 +#define ADJ_BCK_IPV4 1 +#define ADJ_PRI_IPV6 2 +#define ADJ_BCK_IPV6 3 +#define LS_ADJ_MAX 4 + struct ls_adjacency { /* (LAN)-Adjacency SID for OSPF */ + uint32_t sid; /* SID as MPLS label or index */ + uint8_t flags; /* Flags */ + uint8_t weight; /* Administrative weight */ + union { + struct in_addr addr; /* Neighbor @IP for OSPF */ + uint8_t sysid[ISO_SYS_ID_LEN]; /* or Sys-ID for ISIS */ + } neighbor; + } adj_sid[4]; /* IPv4/IPv6 & Primary/Backup (LAN)-Adj. SID */ + uint32_t *srlgs; /* List of Shared Risk Link Group */ + uint8_t srlg_len; /* number of SRLG in the list */ +}; + +/* Link State flags to indicate which Prefix parameters are valid */ +#define LS_PREF_UNSET 0x00 +#define LS_PREF_IGP_FLAG 0x01 +#define LS_PREF_ROUTE_TAG 0x02 +#define LS_PREF_EXTENDED_TAG 0x04 +#define LS_PREF_METRIC 0x08 +#define LS_PREF_SR 0x10 + +/* Link State Prefix */ +struct ls_prefix { + uint8_t flags; /* Flag for parameters validity */ + struct ls_node_id adv; /* Adv. Router of this Link State */ + struct prefix pref; /* IPv4 or IPv6 prefix */ + uint8_t igp_flag; /* IGP Flags associated to the prefix */ + uint32_t route_tag; /* IGP Route Tag */ + uint64_t extended_tag; /* IGP Extended Route Tag */ + uint32_t metric; /* Route metric for this prefix */ + struct ls_sid { + uint32_t sid; /* Segment Routing ID */ + uint8_t sid_flag; /* Segment Routing Flags */ + uint8_t algo; /* Algorithm for Segment Routing */ + } sr; +}; + +/** + * Create a new Link State Node. Structure is dynamically allocated. + * + * @param adv Mandatory Link State Node ID i.e. advertise router information + * @param rid Router ID as IPv4 address + * @param rid6 Router ID as IPv6 address + * + * @return New Link State Node + */ +extern struct ls_node *ls_node_new(struct ls_node_id adv, struct in_addr rid, + struct in6_addr rid6); + +/** + * Remove Link State Node. Data structure is freed. + * + * @param node Pointer to a valid Link State Node structure + */ +extern void ls_node_del(struct ls_node *node); + +/** + * Check if two Link State Nodes are equal. Note that this routine has the same + * return value sense as '==' (which is different from a comparison). + * + * @param n1 First Link State Node to be compare + * @param n2 Second Link State Node to be compare + * + * @return 1 if equal, 0 otherwise + */ +extern int ls_node_same(struct ls_node *n1, struct ls_node *n2); + +/** + * Create a new Link State Attributes. Structure is dynamically allocated. + * At least one of parameters MUST be valid and not equal to 0. + * + * @param adv Mandatory Link State Node ID i.e. advertise router ID + * @param local Local IPv4 address + * @param local6 Local Ipv6 address + * @param local_id Local Identifier + * + * @return New Link State Attributes + */ +extern struct ls_attributes *ls_attributes_new(struct ls_node_id adv, + struct in_addr local, + struct in6_addr local6, + uint32_t local_id); + +/** + * Remove SRLGs from Link State Attributes if defined. + * + * @param attr Pointer to a valid Link State Attribute structure + */ +extern void ls_attributes_srlg_del(struct ls_attributes *attr); + +/** + * Remove Link State Attributes. Data structure is freed. + * + * @param attr Pointer to a valid Link State Attribute structure + */ +extern void ls_attributes_del(struct ls_attributes *attr); + +/** + * Check if two Link State Attributes are equal. Note that this routine has the + * same return value sense as '==' (which is different from a comparison). + * + * @param a1 First Link State Attributes to be compare + * @param a2 Second Link State Attributes to be compare + * + * @return 1 if equal, 0 otherwise + */ +extern int ls_attributes_same(struct ls_attributes *a1, + struct ls_attributes *a2); + +/** + * Create a new Link State Prefix. Structure is dynamically allocated. + * + * @param adv Mandatory Link State Node ID i.e. advertise router ID + * @param p Mandatory Prefix + * + * @return New Link State Prefix + */ +extern struct ls_prefix *ls_prefix_new(struct ls_node_id adv, struct prefix p); + +/** + * Remove Link State Prefix. Data Structure is freed. + * + * @param pref Pointer to a valid Link State Attribute Prefix. + */ +extern void ls_prefix_del(struct ls_prefix *pref); + +/** + * Check if two Link State Prefix are equal. Note that this routine has the + * same return value sense as '==' (which is different from a comparison). + * + * @param p1 First Link State Prefix to be compare + * @param p2 Second Link State Prefix to be compare + * + * @return 1 if equal, 0 otherwise + */ +extern int ls_prefix_same(struct ls_prefix *p1, struct ls_prefix *p2); + +/** + * In addition a Graph model is defined as an overlay on top of link state + * database in order to ease Path Computation algorithm implementation. + * Denoted G(V, E), a graph is composed by a list of Vertices (V) which + * represents the network Node and a list of Edges (E) which represents node + * Link. An additional list of prefixes (P) is also added. + * A prefix (P) is also attached to the Vertex (V) which advertise it. + * + * Vertex (V) contains the list of outgoing Edges (E) that connect this Vertex + * with its direct neighbors and the list of incoming Edges (E) that connect + * the direct neighbors to this Vertex. Indeed, the Edge (E) is unidirectional, + * thus, it is necessary to add 2 Edges to model a bidirectional relation + * between 2 Vertices. + * + * Edge (E) contains the source and destination Vertex that this Edge + * is connecting. + * + * A unique Key is used to identify both Vertices and Edges within the Graph. + * An easy way to build this key is to used the IP address: i.e. loopback + * address for Vertices and link IP address for Edges. + * + * -------------- --------------------------- -------------- + * | Connected |---->| Connected Edge Va to Vb |--->| Connected | + * --->| Vertex | --------------------------- | Vertex |----> + * | | | | + * | - Key (Va) | | - Key (Vb) | + * <---| - Vertex | --------------------------- | - Vertex |<---- + * | |<----| Connected Edge Vb to Va |<---| | + * -------------- --------------------------- -------------- + * + */ + +enum ls_status { UNSET = 0, NEW, UPDATE, DELETE, SYNC, ORPHAN }; +enum ls_type { GENERIC = 0, VERTEX, EDGE, SUBNET }; + +/* Link State Vertex structure */ +PREDECL_RBTREE_UNIQ(vertices); +struct ls_vertex { + enum ls_type type; /* Link State Type */ + enum ls_status status; /* Status of the Vertex in the TED */ + struct vertices_item entry; /* Entry in RB Tree */ + uint64_t key; /* Unique Key identifier */ + struct ls_node *node; /* Link State Node */ + struct list *incoming_edges; /* List of incoming Link State links */ + struct list *outgoing_edges; /* List of outgoing Link State links */ + struct list *prefixes; /* List of advertised prefix */ +}; + +/* Link State Edge structure */ +PREDECL_RBTREE_UNIQ(edges); +struct ls_edge { + enum ls_type type; /* Link State Type */ + enum ls_status status; /* Status of the Edge in the TED */ + struct edges_item entry; /* Entry in RB tree */ + uint64_t key; /* Unique Key identifier */ + struct ls_attributes *attributes; /* Link State attributes */ + struct ls_vertex *source; /* Pointer to the source Vertex */ + struct ls_vertex *destination; /* Pointer to the destination Vertex */ +}; + +/* Link State Subnet structure */ +PREDECL_RBTREE_UNIQ(subnets); +struct ls_subnet { + enum ls_type type; /* Link State Type */ + enum ls_status status; /* Status of the Subnet in the TED */ + struct subnets_item entry; /* Entry in RB tree */ + struct prefix key; /* Unique Key identifier */ + struct ls_prefix *ls_pref; /* Link State Prefix */ + struct ls_vertex *vertex; /* Back pointer to the Vertex owner */ +}; + +/* Declaration of Vertices, Edges and Prefixes RB Trees */ +macro_inline int vertex_cmp(const struct ls_vertex *node1, + const struct ls_vertex *node2) +{ + return numcmp(node1->key, node2->key); +} +DECLARE_RBTREE_UNIQ(vertices, struct ls_vertex, entry, vertex_cmp); + +macro_inline int edge_cmp(const struct ls_edge *edge1, + const struct ls_edge *edge2) +{ + return numcmp(edge1->key, edge2->key); +} +DECLARE_RBTREE_UNIQ(edges, struct ls_edge, entry, edge_cmp); + +/* + * Prefix comparison are done to the host part so, 10.0.0.1/24 + * and 10.0.0.2/24 are considered come different + */ +macro_inline int subnet_cmp(const struct ls_subnet *a, + const struct ls_subnet *b) +{ + if (a->key.family != b->key.family) + return numcmp(a->key.family, b->key.family); + + if (a->key.prefixlen != b->key.prefixlen) + return numcmp(a->key.prefixlen, b->key.prefixlen); + + if (a->key.family == AF_INET) + return memcmp(&a->key.u.val, &b->key.u.val, 4); + + return memcmp(&a->key.u.val, &b->key.u.val, 16); +} +DECLARE_RBTREE_UNIQ(subnets, struct ls_subnet, entry, subnet_cmp); + +/* Link State TED Structure */ +struct ls_ted { + uint32_t key; /* Unique identifier */ + char name[MAX_NAME_LENGTH]; /* Name of this graph. Could be null */ + uint32_t as_number; /* AS number of the modeled network */ + struct ls_vertex *self; /* Vertex of the FRR instance */ + struct vertices_head vertices; /* List of Vertices */ + struct edges_head edges; /* List of Edges */ + struct subnets_head subnets; /* List of Subnets */ +}; + +/* Generic Link State Element */ +struct ls_element { + enum ls_type type; /* Link State Element Type */ + enum ls_status status; /* Link State Status in the TED */ + void *data; /* Link State payload */ +}; + +/** + * Add new vertex to the Link State DB. Vertex is created from the Link State + * Node. Vertex data structure is dynamically allocated. + * + * @param ted Traffic Engineering Database structure + * @param node Link State Node + * + * @return New Vertex or NULL in case of error + */ +extern struct ls_vertex *ls_vertex_add(struct ls_ted *ted, + struct ls_node *node); + +/** + * Delete Link State Vertex. This function clean internal Vertex lists (incoming + * and outgoing Link State Edge and Link State Subnet). Vertex Data structure + * is freed but not the Link State Node. Link State DB is not modified if Vertex + * is NULL or not found in the Data Base. Note that referenced to Link State + * Edges & SubNets are not removed as they could be connected to other Vertices. + * + * @param ted Traffic Engineering Database structure + * @param vertex Link State Vertex to be removed + */ +extern void ls_vertex_del(struct ls_ted *ted, struct ls_vertex *vertex); + +/** + * Delete Link State Vertex as ls_vertex_del() but also removed associated + * Link State Node. + * + * @param ted Traffic Engineering Database structure + * @param vertex Link State Vertex to be removed + */ +extern void ls_vertex_del_all(struct ls_ted *ted, struct ls_vertex *vertex); + +/** + * Update Vertex with the Link State Node. A new vertex is created if no one + * corresponds to the Link State Node. + * + * @param ted Link State Data Base + * @param node Link State Node to be updated + * + * @return Updated Link State Vertex or Null in case of error + */ +extern struct ls_vertex *ls_vertex_update(struct ls_ted *ted, + struct ls_node *node); + +/** + * Clean Vertex structure by removing all Edges and Subnets marked as ORPHAN + * from this vertex. Link State Update message is sent if zclient is not NULL. + * + * @param ted Link State Data Base + * @param vertex Link State Vertex to be cleaned + * @param zclient Reference to Zebra Client + */ +extern void ls_vertex_clean(struct ls_ted *ted, struct ls_vertex *vertex, + struct zclient *zclient); + +/** + * This function convert the ISIS ISO system ID into a 64 bits unsigned integer + * following the architecture dependent byte order. + * + * @param sysid The ISO system ID + * @return Key as 64 bits unsigned integer + */ +extern uint64_t sysid_to_key(const uint8_t sysid[ISO_SYS_ID_LEN]); + +/** + * Find Vertex in the Link State DB by its unique key. + * + * @param ted Link State Data Base + * @param key Vertex Key different from 0 + * + * @return Vertex if found, NULL otherwise + */ +extern struct ls_vertex *ls_find_vertex_by_key(struct ls_ted *ted, + const uint64_t key); + +/** + * Find Vertex in the Link State DB by its Link State Node. + * + * @param ted Link State Data Base + * @param nid Link State Node ID + * + * @return Vertex if found, NULL otherwise + */ +extern struct ls_vertex *ls_find_vertex_by_id(struct ls_ted *ted, + struct ls_node_id nid); + +/** + * Check if two Vertices are equal. Note that this routine has the same return + * value sense as '==' (which is different from a comparison). + * + * @param v1 First vertex to compare + * @param v2 Second vertex to compare + * + * @return 1 if equal, 0 otherwise + */ +extern int ls_vertex_same(struct ls_vertex *v1, struct ls_vertex *v2); + +/** + * Add new Edge to the Link State DB. Edge is created from the Link State + * Attributes. Edge data structure is dynamically allocated. + * + * @param ted Link State Data Base + * @param attributes Link State attributes + * + * @return New Edge or NULL in case of error + */ +extern struct ls_edge *ls_edge_add(struct ls_ted *ted, + struct ls_attributes *attributes); + +/** + * Update the Link State Attributes information of an existing Edge. If there is + * no corresponding Edge in the Link State Data Base, a new Edge is created. + * + * @param ted Link State Data Base + * @param attributes Link State Attributes + * + * @return Updated Link State Edge, or NULL in case of error + */ +extern struct ls_edge *ls_edge_update(struct ls_ted *ted, + struct ls_attributes *attributes); + +/** + * Check if two Edges are equal. Note that this routine has the same return + * value sense as '==' (which is different from a comparison). + * + * @param e1 First edge to compare + * @param e2 Second edge to compare + * + * @return 1 if equal, 0 otherwise + */ +extern int ls_edge_same(struct ls_edge *e1, struct ls_edge *e2); + +/** + * Remove Edge from the Link State DB. Edge data structure is freed but not the + * Link State Attributes data structure. Link State DB is not modified if Edge + * is NULL or not found in the Data Base. + * + * @param ted Link State Data Base + * @param edge Edge to be removed + */ +extern void ls_edge_del(struct ls_ted *ted, struct ls_edge *edge); + +/** + * Remove Edge and associated Link State Attributes from the Link State DB. + * Link State DB is not modified if Edge is NULL or not found. + * + * @param ted Link State Data Base + * @param edge Edge to be removed + */ +extern void ls_edge_del_all(struct ls_ted *ted, struct ls_edge *edge); + +/** + * Find Edge in the Link State Data Base by Edge key. + * + * @param ted Link State Data Base + * @param key Edge key + * + * @return Edge if found, NULL otherwise + */ +extern struct ls_edge *ls_find_edge_by_key(struct ls_ted *ted, + const uint64_t key); + +/** + * Find Edge in the Link State Data Base by the source (local IPv4 or IPv6 + * address or local ID) informations of the Link State Attributes + * + * @param ted Link State Data Base + * @param attributes Link State Attributes + * + * @return Edge if found, NULL otherwise + */ +extern struct ls_edge * +ls_find_edge_by_source(struct ls_ted *ted, struct ls_attributes *attributes); + +/** + * Find Edge in the Link State Data Base by the destination (remote IPv4 or IPv6 + * address of remote ID) information of the Link State Attributes + * + * @param ted Link State Data Base + * @param attributes Link State Attributes + * + * @return Edge if found, NULL otherwise + */ +extern struct ls_edge * +ls_find_edge_by_destination(struct ls_ted *ted, + struct ls_attributes *attributes); + +/** + * Add new Subnet to the Link State DB. Subnet is created from the Link State + * prefix. Subnet data structure is dynamically allocated. + * + * @param ted Link State Data Base + * @param pref Link State Prefix + * + * @return New Subnet + */ +extern struct ls_subnet *ls_subnet_add(struct ls_ted *ted, + struct ls_prefix *pref); + +/** + * Update the Link State Prefix information of an existing Subnet. If there is + * no corresponding Subnet in the Link State Data Base, a new Subnet is created. + * + * @param ted Link State Data Base + * @param pref Link State Prefix + * + * @return Updated Link State Subnet, or NULL in case of error + */ +extern struct ls_subnet *ls_subnet_update(struct ls_ted *ted, + struct ls_prefix *pref); + +/** + * Check if two Subnets are equal. Note that this routine has the same return + * value sense as '==' (which is different from a comparison). + * + * @param s1 First subnet to compare + * @param s2 Second subnet to compare + * + * @return 1 if equal, 0 otherwise + */ +extern int ls_subnet_same(struct ls_subnet *s1, struct ls_subnet *s2); + +/** + * Remove Subnet from the Link State DB. Subnet data structure is freed but + * not the Link State prefix data structure. Link State DB is not modified + * if Subnet is NULL or not found in the Data Base. + * + * @param ted Link State Data Base + * @param subnet Subnet to be removed + */ +extern void ls_subnet_del(struct ls_ted *ted, struct ls_subnet *subnet); + +/** + * Remove Subnet and the associated Link State Prefix from the Link State DB. + * Link State DB is not modified if Subnet is NULL or not found. + * + * @param ted Link State Data Base + * @param subnet Subnet to be removed + */ +extern void ls_subnet_del_all(struct ls_ted *ted, struct ls_subnet *subnet); + +/** + * Find Subnet in the Link State Data Base by prefix. + * + * @param ted Link State Data Base + * @param prefix Link State Prefix + * + * @return Subnet if found, NULL otherwise + */ +extern struct ls_subnet *ls_find_subnet(struct ls_ted *ted, + const struct prefix prefix); + +/** + * Create a new Link State Data Base. + * + * @param key Unique key of the data base. Must be different from 0 + * @param name Name of the data base (may be NULL) + * @param asn AS Number for this data base. 0 if unknown + * + * @return New Link State Database or NULL in case of error + */ +extern struct ls_ted *ls_ted_new(const uint32_t key, const char *name, + uint32_t asn); + +/** + * Delete existing Link State Data Base. Vertices, Edges, and Subnets are not + * removed. + * + * @param ted Link State Data Base + */ +extern void ls_ted_del(struct ls_ted *ted); + +/** + * Delete all Link State Vertices, Edges and SubNets and the Link State DB. + * + * @param ted Link State Data Base + */ +extern void ls_ted_del_all(struct ls_ted **ted); + +/** + * Clean Link State Data Base by removing all Vertices, Edges and SubNets marked + * as ORPHAN. + * + * @param ted Link State Data Base + */ +extern void ls_ted_clean(struct ls_ted *ted); + +/** + * Connect Source and Destination Vertices by given Edge. Only non NULL source + * and destination vertices are connected. + * + * @param src Link State Source Vertex + * @param dst Link State Destination Vertex + * @param edge Link State Edge. Must not be NULL + */ +extern void ls_connect_vertices(struct ls_vertex *src, struct ls_vertex *dst, + struct ls_edge *edge); + +/** + * Connect Link State Edge to the Link State Vertex which could be a Source or + * a Destination Vertex. + * + * @param vertex Link State Vertex to be connected. Must not be NULL + * @param edge Link State Edge connection. Must not be NULL + * @param source True for a Source, false for a Destination Vertex + */ +extern void ls_connect(struct ls_vertex *vertex, struct ls_edge *edge, + bool source); + +/** + * Disconnect Link State Edge from the Link State Vertex which could be a + * Source or a Destination Vertex. + * + * @param vertex Link State Vertex to be connected. Must not be NULL + * @param edge Link State Edge connection. Must not be NULL + * @param source True for a Source, false for a Destination Vertex + */ +extern void ls_disconnect(struct ls_vertex *vertex, struct ls_edge *edge, + bool source); + +/** + * Disconnect Link State Edge from both Source and Destination Vertex. + * + * @param edge Link State Edge to be disconnected + */ +extern void ls_disconnect_edge(struct ls_edge *edge); + + +/** + * The Link State Message is defined to convey Link State parameters from + * the routing protocol (OSPF or IS-IS) to other daemons e.g. BGP. + * + * The structure is composed of: + * - Event of the message: + * - Sync: Send the whole LS DB following a request + * - Add: Send the a new Link State element + * - Update: Send an update of an existing Link State element + * - Delete: Indicate that the given Link State element is removed + * - Type of Link State element: Node, Attribute or Prefix + * - Remote node id when known + * - Data: Node, Attributes or Prefix + * + * A Link State Message can carry only one Link State Element (Node, Attributes + * of Prefix) at once, and only one Link State Message is sent through ZAPI + * Opaque Link State type at once. + */ + +/* ZAPI Opaque Link State Message Event */ +#define LS_MSG_EVENT_UNDEF 0 +#define LS_MSG_EVENT_SYNC 1 +#define LS_MSG_EVENT_ADD 2 +#define LS_MSG_EVENT_UPDATE 3 +#define LS_MSG_EVENT_DELETE 4 + +/* ZAPI Opaque Link State Message sub-Type */ +#define LS_MSG_TYPE_NODE 1 +#define LS_MSG_TYPE_ATTRIBUTES 2 +#define LS_MSG_TYPE_PREFIX 3 + +/* Link State Message */ +struct ls_message { + uint8_t event; /* Message Event: Sync, Add, Update, Delete */ + uint8_t type; /* Message Data Type: Node, Attribute, Prefix */ + struct ls_node_id remote_id; /* Remote Link State Node ID */ + union { + struct ls_node *node; /* Link State Node */ + struct ls_attributes *attr; /* Link State Attributes */ + struct ls_prefix *prefix; /* Link State Prefix */ + } data; +}; + +/** + * Register Link State daemon as a server or client for Zebra OPAQUE API. + * + * @param zclient Zebra client structure + * @param server Register daemon as a server (true) or as a client (false) + * + * @return 0 if success, -1 otherwise + */ +extern int ls_register(struct zclient *zclient, bool server); + +/** + * Unregister Link State daemon as a server or client for Zebra OPAQUE API. + * + * @param zclient Zebra client structure + * @param server Unregister daemon as a server (true) or as a client (false) + * + * @return 0 if success, -1 otherwise + */ +extern int ls_unregister(struct zclient *zclient, bool server); + +/** + * Send Link State SYNC message to request the complete Link State Database. + * + * @param zclient Zebra client + * + * @return 0 if success, -1 otherwise + */ +extern int ls_request_sync(struct zclient *zclient); + +/** + * Parse Link State Message from stream. Used this function once receiving a + * new ZAPI Opaque message of type Link State. + * + * @param s Stream buffer. Must not be NULL. + * + * @return New Link State Message or NULL in case of error + */ +extern struct ls_message *ls_parse_msg(struct stream *s); + +/** + * Delete existing message. Data structure is freed. + * + * @param msg Link state message to be deleted + */ +extern void ls_delete_msg(struct ls_message *msg); + +/** + * Send Link State Message as new ZAPI Opaque message of type Link State. + * If destination is not NULL, message is sent as Unicast otherwise it is + * broadcast to all registered daemon. + * + * @param zclient Zebra Client + * @param msg Link State Message to be sent + * @param dst Destination daemon for unicast message, + * NULL for broadcast message + * + * @return 0 on success, -1 otherwise + */ +extern int ls_send_msg(struct zclient *zclient, struct ls_message *msg, + struct zapi_opaque_reg_info *dst); + +/** + * Create a new Link State Message from a Link State Vertex. If Link State + * Message is NULL, a new data structure is dynamically allocated. + * + * @param msg Link State Message to be filled or NULL + * @param vertex Link State Vertex. Must not be NULL + * + * @return New Link State Message msg parameter is NULL or pointer + * to the provided Link State Message + */ +extern struct ls_message *ls_vertex2msg(struct ls_message *msg, + struct ls_vertex *vertex); + +/** + * Create a new Link State Message from a Link State Edge. If Link State + * Message is NULL, a new data structure is dynamically allocated. + * + * @param msg Link State Message to be filled or NULL + * @param edge Link State Edge. Must not be NULL + * + * @return New Link State Message msg parameter is NULL or pointer + * to the provided Link State Message + */ +extern struct ls_message *ls_edge2msg(struct ls_message *msg, + struct ls_edge *edge); + +/** + * Create a new Link State Message from a Link State Subnet. If Link State + * Message is NULL, a new data structure is dynamically allocated. + * + * @param msg Link State Message to be filled or NULL + * @param subnet Link State Subnet. Must not be NULL + * + * @return New Link State Message msg parameter is NULL or pointer + * to the provided Link State Message + */ +extern struct ls_message *ls_subnet2msg(struct ls_message *msg, + struct ls_subnet *subnet); + +/** + * Convert Link State Message into Vertex and update TED accordingly to + * the message event: SYNC, ADD, UPDATE or DELETE. + * + * @param ted Link State Database + * @param msg Link State Message + * @param delete True to delete the Link State Vertex from the Database, + * False otherwise. If true, return value is NULL in case + * of deletion. + * + * @return Vertex if success, NULL otherwise or if Vertex is removed + */ +extern struct ls_vertex *ls_msg2vertex(struct ls_ted *ted, + struct ls_message *msg, bool delete); + +/** + * Convert Link State Message into Edge and update TED accordingly to + * the message event: SYNC, ADD, UPDATE or DELETE. + * + * @param ted Link State Database + * @param msg Link State Message + * @param delete True to delete the Link State Edge from the Database, + * False otherwise. If true, return value is NULL in case + * of deletion. + * + * @return Edge if success, NULL otherwise or if Edge is removed + */ +extern struct ls_edge *ls_msg2edge(struct ls_ted *ted, struct ls_message *msg, + bool delete); + +/** + * Convert Link State Message into Subnet and update TED accordingly to + * the message event: SYNC, ADD, UPDATE or DELETE. + * + * @param ted Link State Database + * @param msg Link State Message + * @param delete True to delete the Link State Subnet from the Database, + * False otherwise. If true, return value is NULL in case + * of deletion. + * + * @return Subnet if success, NULL otherwise or if Subnet is removed + */ +extern struct ls_subnet *ls_msg2subnet(struct ls_ted *ted, + struct ls_message *msg, bool delete); + +/** + * Convert Link State Message into Link State element (Vertex, Edge or Subnet) + * and update TED accordingly to the message event: SYNC, ADD, UPDATE or DELETE. + * + * @param ted Link State Database + * @param msg Link State Message + * @param delete True to delete the Link State Element from the Database, + * False otherwise. If true, return value is NULL in case + * of deletion. + * + * @return Element if success, NULL otherwise or if Element is removed + */ +extern struct ls_element *ls_msg2ted(struct ls_ted *ted, struct ls_message *msg, + bool delete); + +/** + * Convert stream buffer into Link State element (Vertex, Edge or Subnet) and + * update TED accordingly to the message event: SYNC, ADD, UPDATE or DELETE. + * + * @param ted Link State Database + * @param s Stream buffer + * @param delete True to delete the Link State Element from the Database, + * False otherwise. If true, return value is NULL in case + * of deletion. + * + * @return Element if success, NULL otherwise or if Element is removed + */ +extern struct ls_element *ls_stream2ted(struct ls_ted *ted, struct stream *s, + bool delete); + +/** + * Send all the content of the Link State Data Base to the given destination. + * Link State content is sent is this order: Vertices, Edges, Subnet. + * This function must be used when a daemon request a Link State Data Base + * Synchronization. + * + * @param ted Link State Data Base. Must not be NULL + * @param zclient Zebra Client. Must not be NULL + * @param dst Destination FRR daemon. Must not be NULL + * + * @return 0 on success, -1 otherwise + */ +extern int ls_sync_ted(struct ls_ted *ted, struct zclient *zclient, + struct zapi_opaque_reg_info *dst); + +struct json_object; +struct vty; +/** + * Show Link State Vertex information. If both vty and json are specified, + * Json format output supersedes standard vty output. + * + * @param vertex Link State Vertex to show. Must not be NULL + * @param vty Pointer to vty output, could be NULL + * @param json Pointer to json output, could be NULL + * @param verbose Set to true for more detail + */ +extern void ls_show_vertex(struct ls_vertex *vertex, struct vty *vty, + struct json_object *json, bool verbose); + +/** + * Show all Link State Vertices information. If both vty and json are specified, + * Json format output supersedes standard vty output. + * + * @param ted Link State Data Base. Must not be NULL + * @param vty Pointer to vty output, could be NULL + * @param json Pointer to json output, could be NULL + * @param verbose Set to true for more detail + */ +extern void ls_show_vertices(struct ls_ted *ted, struct vty *vty, + struct json_object *json, bool verbose); + +/** + * Show Link State Edge information. If both vty and json are specified, + * Json format output supersedes standard vty output. + * + * @param edge Link State Edge to show. Must not be NULL + * @param vty Pointer to vty output, could be NULL + * @param json Pointer to json output, could be NULL + * @param verbose Set to true for more detail + */ +extern void ls_show_edge(struct ls_edge *edge, struct vty *vty, + struct json_object *json, bool verbose); + +/** + * Show all Link State Edges information. If both vty and json are specified, + * Json format output supersedes standard vty output. + * + * @param ted Link State Data Base. Must not be NULL + * @param vty Pointer to vty output, could be NULL + * @param json Pointer to json output, could be NULL + * @param verbose Set to true for more detail + */ +extern void ls_show_edges(struct ls_ted *ted, struct vty *vty, + struct json_object *json, bool verbose); + +/** + * Show Link State Subnets information. If both vty and json are specified, + * Json format output supersedes standard vty output. + * + * @param subnet Link State Subnet to show. Must not be NULL + * @param vty Pointer to vty output, could be NULL + * @param json Pointer to json output, could be NULL + * @param verbose Set to true for more detail + */ +extern void ls_show_subnet(struct ls_subnet *subnet, struct vty *vty, + struct json_object *json, bool verbose); + +/** + * Show all Link State Subnet information. If both vty and json are specified, + * Json format output supersedes standard vty output. + * + * @param ted Link State Data Base. Must not be NULL + * @param vty Pointer to vty output, could be NULL + * @param json Pointer to json output, could be NULL + * @param verbose Set to true for more detail + */ +extern void ls_show_subnets(struct ls_ted *ted, struct vty *vty, + struct json_object *json, bool verbose); + +/** + * Show Link State Data Base information. If both vty and json are specified, + * Json format output supersedes standard vty output. + * + * @param ted Link State Data Base to show. Must not be NULL + * @param vty Pointer to vty output, could be NULL + * @param json Pointer to json output, could be NULL + * @param verbose Set to true for more detail + */ +extern void ls_show_ted(struct ls_ted *ted, struct vty *vty, + struct json_object *json, bool verbose); + +/** + * Dump all Link State Data Base elements for debugging purposes + * + * @param ted Link State Data Base. Must not be NULL + * + */ +extern void ls_dump_ted(struct ls_ted *ted); + +#ifdef __cplusplus +} +#endif + +#endif /* _FRR_LINK_STATE_H_ */ |