diff options
Diffstat (limited to 'ospfd/ospf_ri.h')
| -rw-r--r-- | ospfd/ospf_ri.h | 255 |
1 files changed, 255 insertions, 0 deletions
diff --git a/ospfd/ospf_ri.h b/ospfd/ospf_ri.h new file mode 100644 index 0000000..bbad896 --- /dev/null +++ b/ospfd/ospf_ri.h @@ -0,0 +1,255 @@ +/* + * This is an implementation of RFC4970 Router Information + * with support of RFC5088 PCE Capabilites announcement + * and support of draft-ietf-ospf-segment-routing-extensions-18 + * for Segment Routing Capabilities announcement + * + * + * Module name: Router Information + * Author: Olivier Dugeon <olivier.dugeon@orange.com> + * Copyright (C) 2012 - 2017 Orange Labs http://www.orange.com/ + * + * This file is part of GNU Zebra. + * + * GNU Zebra is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * GNU Zebra is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; see the file COPYING; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _ZEBRA_OSPF_ROUTER_INFO_H +#define _ZEBRA_OSPF_ROUTER_INFO_H + +/* + * Opaque LSA's link state ID for Router Information is + * structured as follows. + * + * 24 16 8 0 + * +--------+--------+--------+--------+ + * | 4 | MBZ |........|........| + * +--------+--------+--------+--------+ + * |<-Type->|<Resv'd>|<-- Instance --->| + * + * + * Type: IANA has assigned '4' for Router Information. + * MBZ: Reserved, must be set to zero. + * Instance: User may select an arbitrary 16-bit value. + * + */ + +/* + * 24 16 8 0 + * +--------+--------+--------+--------+ --- + * | LS age |Options | 9,10,11| A + * +--------+--------+--------+--------+ | + * | 4 | 0 | Instance | | + * +--------+--------+--------+--------+ | + * | Advertising router | | Standard (Opaque) LSA header; + * +--------+--------+--------+--------+ | Type 9,10 or 11 are used. + * | LS sequence number | | + * +--------+--------+--------+--------+ | + * | LS checksum | Length | V + * +--------+--------+--------+--------+ --- + * | Type | Length | A TLV part for Router Information; + * +--------+--------+--------+--------+ | Values might be + * | Values ... | V structured as a set of sub-TLVs. + * +--------+--------+--------+--------+ --- + */ + +/* + * Following section defines TLV body parts. + */ + +/* Up to now, 11 code points have been assigned to Router Information */ +/* Only type 1 Router Capabilities and 6 PCE are supported with this code */ +#define RI_IANA_MAX_TYPE 11 + +/* RFC4970: Router Information Capabilities TLV */ /* Mandatory */ +#define RI_TLV_CAPABILITIES 1 +#define RI_TLV_CAPABILITIES_SIZE 4 +struct ri_tlv_router_cap { + struct tlv_header header; /* Value length is 4 bytes. */ + uint32_t value; +}; + +/* Capabilities bits are left align */ +#define RI_GRACE_RESTART 0x80000000 +#define RI_GRACE_HELPER 0x40000000 +#define RI_STUB_SUPPORT 0x20000000 +#define RI_TE_SUPPORT 0x10000000 +#define RI_P2P_OVER_LAN 0x08000000 +#define RI_TE_EXPERIMENTAL 0x04000000 + +#define RI_TLV_LENGTH 4 + +/* RFC5088: PCE Capabilities TLV */ /* Optional */ +/* RI PCE TLV */ +#define RI_TLV_PCE 6 + +struct ri_tlv_pce { + struct tlv_header header; + /* A set of PCE-sub-TLVs will follow. */ +}; + +/* PCE Address Sub-TLV */ /* Mandatory */ +#define RI_PCE_SUBTLV_ADDRESS 1 +struct ri_pce_subtlv_address { + /* Type = 1; Length is 8 (IPv4) or 20 (IPv6) bytes. */ + struct tlv_header header; +#define PCE_ADDRESS_IPV4_SIZE 8 +#define PCE_ADDRESS_IPV6_SIZE 20 + struct { + uint16_t type; /* Address type: 1 = IPv4, 2 = IPv6 */ +#define PCE_ADDRESS_IPV4 1 +#define PCE_ADDRESS_IPV6 2 + uint16_t reserved; + struct in_addr value; /* PCE address */ + } address; +}; + +/* PCE Path-Scope Sub-TLV */ /* Mandatory */ +#define RI_PCE_SUBTLV_PATH_SCOPE 2 +#define RI_PCE_SUBTLV_PATH_SCOPE_SIZE 4 +struct ri_pce_subtlv_path_scope { + struct tlv_header header; /* Type = 2; Length = 4 bytes. */ + /* + * L, R, Rd, S, Sd, Y, PrefL, PrefR, PrefS and PrefY bits: + * see RFC5088 page 9 + */ + uint32_t value; +}; + +/* PCE Domain Sub-TLV */ /* Optional */ +#define PCE_DOMAIN_TYPE_AREA 1 +#define PCE_DOMAIN_TYPE_AS 2 + +#define RI_PCE_SUBTLV_DOMAIN 3 +#define RI_PCE_SUBTLV_DOMAIN_SIZE 8 +struct ri_pce_subtlv_domain { + struct tlv_header header; /* Type = 3; Length = 8 bytes. */ + uint16_t type; /* Domain type: 1 = OSPF Area ID, 2 = AS Number */ + uint16_t reserved; + uint32_t value; +}; + +/* PCE Neighbor Sub-TLV */ /* Mandatory if R or S bit is set */ +#define RI_PCE_SUBTLV_NEIGHBOR 4 +#define RI_PCE_SUBTLV_NEIGHBOR_SIZE 8 +struct ri_pce_subtlv_neighbor { + struct tlv_header header; /* Type = 4; Length = 8 bytes. */ + uint16_t type; /* Domain type: 1 = OSPF Area ID, 2 = AS Number */ + uint16_t reserved; + uint32_t value; +}; + +/* PCE Capabilities Flags Sub-TLV */ /* Optional */ +#define RI_PCE_SUBTLV_CAP_FLAG 5 +#define RI_PCE_SUBTLV_CAP_FLAG_SIZE 4 + +#define PCE_CAP_GMPLS_LINK 0x0001 +#define PCE_CAP_BIDIRECTIONAL 0x0002 +#define PCE_CAP_DIVERSE_PATH 0x0004 +#define PCE_CAP_LOAD_BALANCE 0x0008 +#define PCE_CAP_SYNCHRONIZED 0x0010 +#define PCE_CAP_OBJECTIVES 0x0020 +#define PCE_CAP_ADDITIVE 0x0040 +#define PCE_CAP_PRIORIZATION 0x0080 +#define PCE_CAP_MULTIPLE_REQ 0x0100 + +struct ri_pce_subtlv_cap_flag { + struct tlv_header header; /* Type = 5; Length = n x 4 bytes. */ + uint32_t value; +}; + +/* Structure to share flooding scope info for Segment Routing */ +struct scope_info { + uint8_t scope; + struct list *areas; +}; + +/* Flags to manage the Router Information LSA. */ +#define RIFLG_LSA_INACTIVE 0x0 +#define RIFLG_LSA_ENGAGED 0x1 +#define RIFLG_LSA_FORCED_REFRESH 0x2 + +/* Store Router Information PCE TLV and SubTLV in network byte order. */ +struct ospf_pce_info { + bool enabled; + struct ri_tlv_pce pce_header; + struct ri_pce_subtlv_address pce_address; + struct ri_pce_subtlv_path_scope pce_scope; + struct list *pce_domain; + struct list *pce_neighbor; + struct ri_pce_subtlv_cap_flag pce_cap_flag; +}; + +/* + * Store Router Information Segment Routing TLV and SubTLV + * in network byte order + */ +struct ospf_ri_sr_info { + bool enabled; + /* Algorithms supported by the node */ + struct ri_sr_tlv_sr_algorithm algo; + /* + * Segment Routing Global Block i.e. label range + * Only one range supported in this code + */ + struct ri_sr_tlv_sid_label_range srgb; + /* + * Segment Routing Local Block. + * Only one block is authorized - see section 3.3 + */ + struct ri_sr_tlv_sid_label_range srlb; + /* Maximum SID Depth supported by the node */ + struct ri_sr_tlv_node_msd msd; +}; + +/* Store area information to flood LSA per area */ +struct ospf_ri_area_info { + + uint32_t flags; + + /* area pointer if flooding is Type 10 Null if flooding is AS scope */ + struct ospf_area *area; +}; + +/* Following structure are internal use only. */ +struct ospf_router_info { + bool enabled; + + uint8_t registered; + uint8_t scope; + /* LSA flags are only used when scope is AS flooding */ + uint32_t as_flags; + + /* List of area info to flood RI LSA */ + struct list *area_info; + + /* Store Router Information Capabilities LSA */ + struct ri_tlv_router_cap router_cap; + + /* Store PCE capability LSA */ + struct ospf_pce_info pce_info; + + /* Store SR capability LSA */ + struct ospf_ri_sr_info sr_info; +}; + +/* Prototypes. */ +extern int ospf_router_info_init(void); +extern void ospf_router_info_term(void); +extern void ospf_router_info_finish(void); +extern int ospf_router_info_enable(void); +extern void ospf_router_info_update_sr(bool enable, struct sr_node *self); +extern struct scope_info ospf_router_info_get_flooding_scope(void); +#endif /* _ZEBRA_OSPF_ROUTER_INFO_H */ |