diff options
Diffstat (limited to '')
-rw-r--r-- | tests/topotests/bgp_gr_functionality_topo1/test_bgp_gr_functionality_topo1-4.py | 1686 |
1 files changed, 1686 insertions, 0 deletions
diff --git a/tests/topotests/bgp_gr_functionality_topo1/test_bgp_gr_functionality_topo1-4.py b/tests/topotests/bgp_gr_functionality_topo1/test_bgp_gr_functionality_topo1-4.py new file mode 100644 index 0000000..835ef41 --- /dev/null +++ b/tests/topotests/bgp_gr_functionality_topo1/test_bgp_gr_functionality_topo1-4.py @@ -0,0 +1,1686 @@ +#!/usr/bin/env python +# +# Copyright (c) 2019 by VMware, Inc. ("VMware") +# Used Copyright (c) 2018 by Network Device Education Foundation, Inc. ("NetDEF") +# in this file. +# +# Permission to use, copy, modify, and/or distribute this software +# for any purpose with or without fee is hereby granted, provided +# that the above copyright notice and this permission notice appear +# in all copies. +# +# THE SOFTWARE IS PROVIDED "AS IS" AND VMWARE DISCLAIMS ALL WARRANTIES +# WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL VMWARE BE LIABLE FOR +# ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY +# DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +# WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS +# ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE +# OF THIS SOFTWARE. +# + +""" +Following tests are covered to test BGP Graceful Restart functionality. +Basic Common Test steps for all the test case below : +- Create topology (setup module) + Creating 2 routers topology, r1, r2 in IBGP +- Bring up topology +- Verify for bgp to converge +- Configure BGP Garceful Restart on both the routers. + +1. Transition from Peer-level helper to Global Restarting +2. Transition from Peer-level helper to Global inherit helper +3. Transition from Peer-level restarting to Global inherit helper +4. Default GR functional mode is Helper. +5. Verify that the restarting node sets "R" bit while sending the + BGP open messages after the node restart, only if GR is enabled. +6. Verify if restarting node resets R bit in BGP open message + during normal BGP session flaps as well, even when GR restarting + mode is enabled. Here link flap happen due to interface UP/DOWN. +7. Verify if restarting node resets R bit in BGP + open message during normal BGP session flaps when GR is disabled. +8. Verify that restarting nodes set "F" bit while sending + the BGP open messages after it restarts, only when BGP GR is enabled. +9. Verify that only GR helper routers keep the stale + route entries, not any GR disabled router. +10. Verify that GR helper routers keeps all the routes received + from restarting node if both the routers are configured as + GR restarting node. +11. Verify that GR helper routers delete all the routes + received from a node if both the routers are configured as GR + helper node. +12. After BGP neighborship is established and GR capability is exchanged, + transition restarting router to disabled state and vice versa. +13. After BGP neighborship is established and GR capability is exchanged, + transition restarting router to disabled state and vice versa. +14. Verify that restarting nodes reset "F" bit while sending + the BGP open messages after it's restarts, when BGP GR is **NOT** enabled. +15. Verify that only GR helper routers keep the stale + route entries, not any GR disabled router. +16. Transition from Global Restarting to Disable and then Global + Disable to Restarting. +17. Transition from Global Helper to Disable and then Global + Disable to Helper. +18. Transition from Global Restart to Helper and then Global + Helper to Restart, Global Mode : GR Restarting + PerPeer Mode : GR Helper + GR Mode effective : GR Helper +19. Transition from Peer-level helper to Global Restarting, + Global Mode : GR Restarting + PerPeer Mode : GR Restarting + GR Mode effective : GR Restarting +20. Transition from Peer-level restart to Global Restart + Global Mode : GR Restarting + PerPeer Mode : GR Restarting + GR Mode effective : GR Restarting +21. Transition from Peer-level disabled to Global Restart + Global Mode : GR Restarting + PerPeer Mode : GR Disabled + GR Mode effective : GR Disabled +22. Peer-level inherit from Global Restarting + Global Mode : GR Restart + PerPeer Mode : None + GR Mode effective : GR Restart +23. Transition from Peer-level disable to Global inherit helper + Global Mode : None + PerPeer Mode : GR Disable + GR Mode effective : GR Disable + +These tests have been broken up into 4 sub python scripts because +the totality of this run was fairly significant. +""" + +import os +import sys +import time +import pytest + +# Save the Current Working Directory to find configuration files. +CWD = os.path.dirname(os.path.realpath(__file__)) +sys.path.append(os.path.join("../")) +sys.path.append(os.path.join("../lib/")) + +# pylint: disable=C0413 +# Import topogen and topotest helpers +from lib.topogen import Topogen, get_topogen +from lib.topolog import logger + +# Required to instantiate the topology builder class. + +# Import topoJson from lib, to create topology and initial configuration +from lib.topojson import build_config_from_json +from lib.bgp import ( + clear_bgp, + verify_bgp_rib, + verify_graceful_restart, + create_router_bgp, + verify_r_bit, + verify_f_bit, + verify_bgp_convergence, + verify_bgp_convergence_from_running_config, +) + +from lib.common_config import ( + write_test_header, + reset_config_on_routers, + start_topology, + kill_router_daemons, + start_router_daemons, + verify_rib, + check_address_types, + write_test_footer, + check_router_status, + shutdown_bringup_interface, + step, + get_frr_ipv6_linklocal, + required_linux_kernel_version, +) + +pytestmark = [pytest.mark.bgpd] + + +# Global variables +NEXT_HOP_IP = {"ipv4": "192.168.1.10", "ipv6": "fd00:0:0:1::10"} +NEXT_HOP_IP_1 = {"ipv4": "192.168.0.1", "ipv6": "fd00::1"} +NEXT_HOP_IP_2 = {"ipv4": "192.168.0.2", "ipv6": "fd00::2"} +BGP_CONVERGENCE = False +GR_RESTART_TIMER = 20 +PREFERRED_NEXT_HOP = "link_local" + + +def setup_module(mod): + """ + Sets up the pytest environment + + * `mod`: module name + """ + + global ADDR_TYPES + + # Required linux kernel version for this suite to run. + result = required_linux_kernel_version("4.16") + if result is not True: + pytest.skip("Kernel requirements are not met") + + testsuite_run_time = time.asctime(time.localtime(time.time())) + logger.info("Testsuite start time: {}".format(testsuite_run_time)) + logger.info("=" * 40) + + logger.info("Running setup_module to create topology") + + # This function initiates the topology build with Topogen... + json_file = "{}/bgp_gr_topojson_topo1.json".format(CWD) + tgen = Topogen(json_file, mod.__name__) + global topo + topo = tgen.json_topo + # ... and here it calls Mininet initialization functions. + + # Starting topology, create tmp files which are loaded to routers + # to start daemons and then start routers + start_topology(tgen) + + # Creating configuration from JSON + build_config_from_json(tgen, topo) + + # Don't run this test if we have any failure. + if tgen.routers_have_failure(): + pytest.skip(tgen.errors) + + # Api call verify whether BGP is converged + ADDR_TYPES = check_address_types() + + BGP_CONVERGENCE = verify_bgp_convergence(tgen, topo) + assert BGP_CONVERGENCE is True, "setup_module : Failed \n Error:" " {}".format( + BGP_CONVERGENCE + ) + + logger.info("Running setup_module() done") + + +def teardown_module(mod): + """ + Teardown the pytest environment + + * `mod`: module name + """ + + logger.info("Running teardown_module to delete topology") + + tgen = get_topogen() + + # Stop toplogy and Remove tmp files + tgen.stop_topology() + + logger.info( + "Testsuite end time: {}".format(time.asctime(time.localtime(time.time()))) + ) + logger.info("=" * 40) + + +def configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut, peer): + """ + This function groups the repetitive function calls into one function. + """ + + result = create_router_bgp(tgen, topo, input_dict) + assert result is True, "Testcase {} : Failed \n Error: {}".format(tc_name, result) + + for addr_type in ADDR_TYPES: + neighbor = topo["routers"][peer]["links"]["r1-link1"][addr_type].split("/")[0] + clear_bgp(tgen, addr_type, dut, neighbor=neighbor) + + for addr_type in ADDR_TYPES: + neighbor = topo["routers"][dut]["links"]["r2-link1"][addr_type].split("/")[0] + clear_bgp(tgen, addr_type, peer, neighbor=neighbor) + + result = verify_bgp_convergence_from_running_config(tgen) + assert result is True, "Testcase {} : Failed \n Error: {}".format(tc_name, result) + + return True + + +def next_hop_per_address_family( + tgen, dut, peer, addr_type, next_hop_dict, preferred_next_hop=PREFERRED_NEXT_HOP +): + """ + This function returns link_local or global next_hop per address-family + """ + + intferface = topo["routers"][peer]["links"]["{}-link1".format(dut)]["interface"] + if addr_type == "ipv6" and "link_local" in preferred_next_hop: + next_hop = get_frr_ipv6_linklocal(tgen, peer, intf=intferface) + else: + next_hop = next_hop_dict[addr_type] + + return next_hop + + +def BGP_GR_TC_50_p1(request): + """ + Test Objective : Transition from Peer-level helper to Global inherit helper + Global Mode : None + PerPeer Mode : Helper + GR Mode effective : GR Helper + + """ + + tgen = get_topogen() + tc_name = request.node.name + write_test_header(tc_name) + + # Check router status + check_router_status(tgen) + + # Don't run this test if we have any failure. + if tgen.routers_have_failure(): + pytest.skip(tgen.errors) + + # Creating configuration from JSON + reset_config_on_routers(tgen) + + step( + "Configure R1 as GR helper node at per Peer-level for R2" + " and configure R2 as global restarting node." + ) + + input_dict = { + "r1": { + "bgp": { + "address_family": { + "ipv4": { + "unicast": { + "neighbor": { + "r2": { + "dest_link": { + "r1-link1": {"graceful-restart-helper": True} + } + } + } + } + }, + "ipv6": { + "unicast": { + "neighbor": { + "r2": { + "dest_link": { + "r1-link1": {"graceful-restart-helper": True} + } + } + } + } + }, + } + } + }, + "r2": {"bgp": {"graceful-restart": {"graceful-restart": True}}}, + } + + configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r2") + + step("Verify on R2 that R1 advertises GR capabilities as a helper node") + + for addr_type in ADDR_TYPES: + result = verify_graceful_restart( + tgen, topo, addr_type, input_dict, dut="r1", peer="r2" + ) + assert result is True, "Testcase {} : Failed \n Error {}".format( + tc_name, result + ) + + for addr_type in ADDR_TYPES: + protocol = "bgp" + next_hop = next_hop_per_address_family( + tgen, "r2", "r1", addr_type, NEXT_HOP_IP_1 + ) + input_topo = {"r1": topo["routers"]["r1"]} + result = verify_rib(tgen, addr_type, "r2", input_topo, next_hop, protocol) + assert result is True, "Testcase {} : Failed \n Error {}".format( + tc_name, result + ) + + for addr_type in ADDR_TYPES: + next_hop = next_hop_per_address_family( + tgen, "r1", "r2", addr_type, NEXT_HOP_IP_2 + ) + input_topo = {"r2": topo["routers"]["r2"]} + result = verify_bgp_rib(tgen, addr_type, "r1", input_topo, next_hop) + assert result is True, "Testcase {} : Failed \n Error {}".format( + tc_name, result + ) + + result = verify_rib(tgen, addr_type, "r1", input_topo, next_hop, protocol) + assert result is True, "Testcase {} : Failed \n Error {}".format( + tc_name, result + ) + + step("Kill BGP on R2") + + kill_router_daemons(tgen, "r2", ["bgpd"]) + + step( + "Verify that R2 keeps the stale entries in FIB & R1 keeps stale entries in RIB & FIB" + ) + + for addr_type in ADDR_TYPES: + protocol = "bgp" + next_hop = next_hop_per_address_family( + tgen, "r2", "r1", addr_type, NEXT_HOP_IP_1 + ) + input_topo = {"r1": topo["routers"]["r1"]} + result = verify_rib(tgen, addr_type, "r2", input_topo, next_hop, protocol) + assert result is True, "Testcase {} : Failed \n Error {}".format( + tc_name, result + ) + + for addr_type in ADDR_TYPES: + next_hop = next_hop_per_address_family( + tgen, "r1", "r2", addr_type, NEXT_HOP_IP_2 + ) + input_topo = {"r2": topo["routers"]["r2"]} + result = verify_bgp_rib(tgen, addr_type, "r1", input_topo, next_hop) + assert result is True, "Testcase {} : Failed \n Error {}".format( + tc_name, result + ) + + result = verify_rib(tgen, addr_type, "r1", input_topo, next_hop, protocol) + assert result is True, "Testcase {} : Failed \n Error {}".format( + tc_name, result + ) + + step("Bring up BGP on R2 and remove Peer-level GR config from R1 ") + + start_router_daemons(tgen, "r2", ["bgpd"]) + + input_dict = { + "r1": { + "bgp": { + "address_family": { + "ipv4": { + "unicast": { + "neighbor": { + "r2": { + "dest_link": { + "r1-link1": {"graceful-restart-helper": False} + } + } + } + } + }, + "ipv6": { + "unicast": { + "neighbor": { + "r2": { + "dest_link": { + "r1-link1": {"graceful-restart-helper": False} + } + } + } + } + }, + } + } + } + } + + result = create_router_bgp(tgen, topo, input_dict) + assert result is True, "Testcase {} : Failed \n Error: {}".format(tc_name, result) + + for addr_type in ADDR_TYPES: + neighbor = topo["routers"]["r2"]["links"]["r1-link1"][addr_type].split("/")[0] + clear_bgp(tgen, addr_type, "r1", neighbor=neighbor) + + result = verify_bgp_convergence_from_running_config(tgen) + assert result is True, "Testcase {} : Failed \n Error: {}".format(tc_name, result) + + step("Verify on R2 that R1 still advertises GR capabilities as a helper node") + + input_dict = { + "r1": {"bgp": {"graceful-restart": {"graceful-restart-helper": True}}}, + "r2": {"bgp": {"graceful-restart": {"graceful-restart": True}}}, + } + + for addr_type in ADDR_TYPES: + result = verify_graceful_restart( + tgen, topo, addr_type, input_dict, dut="r1", peer="r2" + ) + assert result is True, "Testcase {} : Failed \n Error {}".format( + tc_name, result + ) + + for addr_type in ADDR_TYPES: + protocol = "bgp" + next_hop = next_hop_per_address_family( + tgen, "r2", "r1", addr_type, NEXT_HOP_IP_1 + ) + input_topo = {"r1": topo["routers"]["r1"]} + result = verify_rib(tgen, addr_type, "r2", input_topo, next_hop, protocol) + assert ( + result is True + ), "Testcase {} : Failed \n Routes are still present \n Error {}".format( + tc_name, result + ) + + for addr_type in ADDR_TYPES: + next_hop = next_hop_per_address_family( + tgen, "r1", "r2", addr_type, NEXT_HOP_IP_2 + ) + input_topo = {"r2": topo["routers"]["r2"]} + result = verify_bgp_rib(tgen, addr_type, "r1", input_topo, next_hop) + assert result is True, "Testcase {} : Failed \n Error {}".format( + tc_name, result + ) + + result = verify_rib(tgen, addr_type, "r1", input_topo, next_hop, protocol) + assert ( + result is True + ), "Testcase {} : Failed \n Routes are still present \n Error {}".format( + tc_name, result + ) + + step("Kill BGP on R2") + + kill_router_daemons(tgen, "r2", ["bgpd"]) + + step( + "Verify that R2 keeps the stale entries in FIB & R1 keeps stale entries in RIB & FIB" + ) + + for addr_type in ADDR_TYPES: + protocol = "bgp" + next_hop = next_hop_per_address_family( + tgen, "r2", "r1", addr_type, NEXT_HOP_IP_1 + ) + input_topo = {"r1": topo["routers"]["r1"]} + result = verify_rib(tgen, addr_type, "r2", input_topo, next_hop, protocol) + assert ( + result is True + ), "Testcase {} : Failed \n Routes are still present \n Error {}".format( + tc_name, result + ) + + for addr_type in ADDR_TYPES: + next_hop = next_hop_per_address_family( + tgen, "r1", "r2", addr_type, NEXT_HOP_IP_2 + ) + input_topo = {"r2": topo["routers"]["r2"]} + result = verify_bgp_rib(tgen, addr_type, "r1", input_topo, next_hop) + assert result is True, "Testcase {} : Failed \n Error {}".format( + tc_name, result + ) + + result = verify_rib(tgen, addr_type, "r1", input_topo, next_hop, protocol) + assert ( + result is True + ), "Testcase {} : Failed \n Routes are still present \n Error {}".format( + tc_name, result + ) + + step("Start BGP on R2") + + start_router_daemons(tgen, "r2", ["bgpd"]) + + write_test_footer(tc_name) + + +def test_BGP_GR_TC_46_p1(request): + """ + Test Objective : transition from Peer-level helper to Global Restarting + Global Mode : GR Restarting + PerPeer Mode : GR Helper + GR Mode effective : GR Helper + + """ + + tgen = get_topogen() + tc_name = request.node.name + write_test_header(tc_name) + + # Check router status + check_router_status(tgen) + + # Don't run this test if we have any failure. + if tgen.routers_have_failure(): + pytest.skip(tgen.errors) + + # Creating configuration from JSON + reset_config_on_routers(tgen) + + step( + "Configure R1 and R2 as GR restarting node in global" + " and helper in per-Peer-level" + ) + + input_dict = { + "r1": { + "bgp": { + "graceful-restart": { + "graceful-restart": True, + }, + "address_family": { + "ipv4": { + "unicast": { + "neighbor": { + "r2": { + "dest_link": { + "r1-link1": {"graceful-restart-helper": True} + } + } + } + } + }, + "ipv6": { + "unicast": { + "neighbor": { + "r2": { + "dest_link": { + "r1-link1": {"graceful-restart-helper": True} + } + } + } + } + }, + }, + } + }, + "r2": {"bgp": {"graceful-restart": {"graceful-restart": True}}}, + } + + configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r2") + + step("Verify on R2 that R1 advertises GR capabilities as a restarting node") + + for addr_type in ADDR_TYPES: + result = verify_graceful_restart( + tgen, topo, addr_type, input_dict, dut="r1", peer="r2" + ) + assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result) + result = verify_graceful_restart( + tgen, topo, addr_type, input_dict, dut="r2", peer="r1" + ) + assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result) + + for addr_type in ADDR_TYPES: + dut = "r2" + peer = "r1" + protocol = "bgp" + next_hop = next_hop_per_address_family( + tgen, dut, peer, addr_type, NEXT_HOP_IP_1 + ) + input_topo = {"r1": topo["routers"]["r1"]} + result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol) + assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result) + + dut = "r1" + peer = "r2" + next_hop = next_hop_per_address_family( + tgen, dut, peer, addr_type, NEXT_HOP_IP_2 + ) + input_topo = {"r2": topo["routers"]["r2"]} + result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop) + assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result) + result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol) + assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result) + + step("Kill BGP on R2") + + kill_router_daemons(tgen, "r2", ["bgpd"]) + + step( + "Verify that R1 keeps the stale entries in RIB & FIB and R2 keeps stale entries in FIB using" + ) + + for addr_type in ADDR_TYPES: + dut = "r2" + peer = "r1" + protocol = "bgp" + next_hop = next_hop_per_address_family( + tgen, dut, peer, addr_type, NEXT_HOP_IP_1 + ) + input_topo = {"r1": topo["routers"]["r1"]} + result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol) + assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result) + + dut = "r1" + peer = "r2" + next_hop = next_hop_per_address_family( + tgen, dut, peer, addr_type, NEXT_HOP_IP_2 + ) + input_topo = {"r2": topo["routers"]["r2"]} + result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop) + assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result) + result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol) + assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result) + + step( + "Bring up BGP on R1 and remove Peer-level GR config" + " from R1 following by a session reset" + ) + + start_router_daemons(tgen, "r2", ["bgpd"]) + + input_dict = { + "r1": { + "bgp": { + "address_family": { + "ipv4": { + "unicast": { + "neighbor": { + "r2": { + "dest_link": { + "r1-link1": {"graceful-restart-helper": False} + } + } + } + } + }, + "ipv6": { + "unicast": { + "neighbor": { + "r2": { + "dest_link": { + "r1-link1": {"graceful-restart-helper": False} + } + } + } + } + }, + } + } + } + } + + configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r2") + + step("Verify on R2 that R1 advertises GR capabilities as a restarting node") + + input_dict = { + "r1": {"bgp": {"graceful-restart": {"graceful-restart": True}}}, + "r2": {"bgp": {"graceful-restart": {"graceful-restart": True}}}, + } + + for addr_type in ADDR_TYPES: + result = verify_graceful_restart( + tgen, topo, addr_type, input_dict, dut="r1", peer="r2" + ) + assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result) + result = verify_graceful_restart( + tgen, topo, addr_type, input_dict, dut="r2", peer="r1" + ) + assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result) + + for addr_type in ADDR_TYPES: + dut = "r1" + peer = "r2" + protocol = "bgp" + next_hop = next_hop_per_address_family( + tgen, dut, peer, addr_type, NEXT_HOP_IP_2 + ) + input_topo = {"r2": topo["routers"]["r2"]} + result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol) + assert ( + result is True + ), "Testcase {} :Failed \n Routes are still present \n Error {}".format( + tc_name, result + ) + + dut = "r2" + peer = "r1" + next_hop = next_hop_per_address_family( + tgen, dut, peer, addr_type, NEXT_HOP_IP_1 + ) + input_topo = {"r1": topo["routers"]["r1"]} + result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop) + assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result) + result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol) + assert ( + result is True + ), "Testcase {} :Failed \n Routes are still present \n Error {}".format( + tc_name, result + ) + + step("Kill BGP on R1") + + kill_router_daemons(tgen, "r1", ["bgpd"]) + + step( + "Verify that R1 keeps the stale entries in FIB command and R2 keeps stale entries in RIB & FIB" + ) + + for addr_type in ADDR_TYPES: + dut = "r1" + peer = "r2" + protocol = "bgp" + next_hop = next_hop_per_address_family( + tgen, dut, peer, addr_type, NEXT_HOP_IP_2 + ) + input_topo = {"r2": topo["routers"]["r2"]} + result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol) + assert ( + result is True + ), "Testcase {} :Failed \n Routes are still present \n Error {}".format( + tc_name, result + ) + + dut = "r2" + peer = "r1" + next_hop = next_hop_per_address_family( + tgen, dut, peer, addr_type, NEXT_HOP_IP_1 + ) + input_topo = {"r1": topo["routers"]["r1"]} + result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop) + assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result) + result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol) + assert ( + result is True + ), "Testcase {} :Failed \n Routes are still present \n Error {}".format( + tc_name, result + ) + + write_test_footer(tc_name) + + +def test_BGP_GR_TC_47_p1(request): + """ + Test Objective : transition from Peer-level restart to Global Restart + Global Mode : GR Restarting + PerPeer Mode : GR Restarting + GR Mode effective : GR Restarting + + """ + + tgen = get_topogen() + tc_name = request.node.name + write_test_header(tc_name) + + # Check router status + check_router_status(tgen) + + # Don't run this test if we have any failure. + if tgen.routers_have_failure(): + pytest.skip(tgen.errors) + + # Creating configuration from JSON + reset_config_on_routers(tgen) + + step("Configure R1 and R2 as GR restarting node in global and per-Peer-level") + + input_dict = { + "r1": { + "bgp": { + "graceful-restart": { + "graceful-restart": True, + }, + "address_family": { + "ipv4": { + "unicast": { + "neighbor": { + "r2": { + "dest_link": { + "r1-link1": {"graceful-restart": True} + } + } + } + } + }, + "ipv6": { + "unicast": { + "neighbor": { + "r2": { + "dest_link": { + "r1-link1": {"graceful-restart": True} + } + } + } + } + }, + }, + } + }, + "r2": {"bgp": {"graceful-restart": {"graceful-restart": True}}}, + } + + configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r2") + + step("Verify on R2 that R1 advertises GR capabilities as a restarting node") + + for addr_type in ADDR_TYPES: + result = verify_graceful_restart( + tgen, topo, addr_type, input_dict, dut="r1", peer="r2" + ) + assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result) + result = verify_graceful_restart( + tgen, topo, addr_type, input_dict, dut="r2", peer="r1" + ) + assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result) + + for addr_type in ADDR_TYPES: + dut = "r1" + peer = "r2" + protocol = "bgp" + next_hop = next_hop_per_address_family( + tgen, dut, peer, addr_type, NEXT_HOP_IP_2 + ) + input_topo = {"r2": topo["routers"]["r2"]} + result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol) + assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result) + + dut = "r2" + peer = "r1" + next_hop = next_hop_per_address_family( + tgen, dut, peer, addr_type, NEXT_HOP_IP_1 + ) + input_topo = {"r1": topo["routers"]["r1"]} + result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop) + assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result) + result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol) + assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result) + + step("Kill BGP on R1") + + kill_router_daemons(tgen, "r1", ["bgpd"]) + + step( + "Verify that R1 keeps the stale entries in FIB and R2 keeps stale entries in RIB & FIB" + ) + + for addr_type in ADDR_TYPES: + dut = "r1" + peer = "r2" + protocol = "bgp" + next_hop = next_hop_per_address_family( + tgen, dut, peer, addr_type, NEXT_HOP_IP_2 + ) + input_topo = {"r2": topo["routers"]["r2"]} + result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol) + assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result) + + dut = "r2" + peer = "r1" + next_hop = next_hop_per_address_family( + tgen, dut, peer, addr_type, NEXT_HOP_IP_1 + ) + input_topo = {"r1": topo["routers"]["r1"]} + result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop) + assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result) + result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol) + assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result) + + step( + "Bring up BGP on R1 and remove Peer-level GR" + " config from R1 following by a session reset" + ) + + start_router_daemons(tgen, "r1", ["bgpd"]) + + input_dict = { + "r1": { + "bgp": { + "address_family": { + "ipv4": { + "unicast": { + "neighbor": { + "r2": { + "dest_link": { + "r1-link1": {"graceful-restart": False} + } + } + } + } + }, + "ipv6": { + "unicast": { + "neighbor": { + "r2": { + "dest_link": { + "r1-link1": {"graceful-restart": False} + } + } + } + } + }, + } + } + } + } + + configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r2") + + step("Verify on R2 that R1 still advertises GR capabilities as a restarting node") + + input_dict = { + "r1": { + "bgp": { + "graceful-restart": { + "graceful-restart": True, + } + } + }, + "r2": {"bgp": {"graceful-restart": {"graceful-restart": True}}}, + } + + for addr_type in ADDR_TYPES: + result = verify_graceful_restart( + tgen, topo, addr_type, input_dict, dut="r1", peer="r2" + ) + assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result) + result = verify_graceful_restart( + tgen, topo, addr_type, input_dict, dut="r2", peer="r1" + ) + assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result) + + for addr_type in ADDR_TYPES: + dut = "r1" + peer = "r2" + protocol = "bgp" + next_hop = next_hop_per_address_family( + tgen, dut, peer, addr_type, NEXT_HOP_IP_2 + ) + input_topo = {"r2": topo["routers"]["r2"]} + result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol) + assert ( + result is True + ), "Testcase {} :Failed \n Routes are still present \n Error {}".format( + tc_name, result + ) + + dut = "r2" + peer = "r1" + next_hop = next_hop_per_address_family( + tgen, dut, peer, addr_type, NEXT_HOP_IP_1 + ) + input_topo = {"r1": topo["routers"]["r1"]} + result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop) + assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result) + result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol) + assert ( + result is True + ), "Testcase {} :Failed \n Routes are still present \n Error {}".format( + tc_name, result + ) + + step("Kill BGP on R1") + + kill_router_daemons(tgen, "r1", ["bgpd"]) + + step( + "Verify that R1 keeps the stale entries in FIB and R2 keeps stale entries in RIB & FIB" + ) + + for addr_type in ADDR_TYPES: + dut = "r1" + peer = "r2" + protocol = "bgp" + next_hop = next_hop_per_address_family( + tgen, dut, peer, addr_type, NEXT_HOP_IP_2 + ) + input_topo = {"r2": topo["routers"]["r2"]} + result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol) + assert ( + result is True + ), "Testcase {} :Failed \n Routes are still present \n Error {}".format( + tc_name, result + ) + + dut = "r2" + peer = "r1" + next_hop = next_hop_per_address_family( + tgen, dut, peer, addr_type, NEXT_HOP_IP_1 + ) + input_topo = {"r1": topo["routers"]["r1"]} + result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop) + assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result) + result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol) + assert ( + result is True + ), "Testcase {} :Failed \n Routes are still present \n Error {}".format( + tc_name, result + ) + + write_test_footer(tc_name) + + +def test_BGP_GR_TC_48_p1(request): + """ + Test Objective : transition from Peer-level disabled to Global Restart + Global Mode : GR Restarting + PerPeer Mode : GR Disabled + GR Mode effective : GR Disabled + + """ + + tgen = get_topogen() + tc_name = request.node.name + write_test_header(tc_name) + + # Check router status + check_router_status(tgen) + + # Don't run this test if we have any failure. + if tgen.routers_have_failure(): + pytest.skip(tgen.errors) + + # Creating configuration from JSON + reset_config_on_routers(tgen) + + step( + "Configure R1 as GR restarting node in global level and" + " GR Disabled in per-Peer-level" + ) + + input_dict = { + "r1": { + "bgp": { + "graceful-restart": { + "graceful-restart": True, + }, + "address_family": { + "ipv4": { + "unicast": { + "neighbor": { + "r2": { + "dest_link": { + "r1-link1": {"graceful-restart-disable": True} + } + } + } + } + }, + "ipv6": { + "unicast": { + "neighbor": { + "r2": { + "dest_link": { + "r1-link1": {"graceful-restart-disable": True} + } + } + } + } + }, + }, + } + }, + "r2": {"bgp": {"graceful-restart": {"graceful-restart-helper": True}}}, + } + + configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r2") + + step("Verify on R2 that R1 does't advertise any GR capabilities") + + for addr_type in ADDR_TYPES: + result = verify_graceful_restart( + tgen, topo, addr_type, input_dict, dut="r1", peer="r2" + ) + assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result) + result = verify_graceful_restart( + tgen, topo, addr_type, input_dict, dut="r2", peer="r1" + ) + assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result) + + for addr_type in ADDR_TYPES: + dut = "r1" + peer = "r2" + protocol = "bgp" + next_hop = next_hop_per_address_family( + tgen, dut, peer, addr_type, NEXT_HOP_IP_2 + ) + input_topo = {"r2": topo["routers"]["r2"]} + result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol) + assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result) + + dut = "r2" + peer = "r1" + next_hop = next_hop_per_address_family( + tgen, dut, peer, addr_type, NEXT_HOP_IP_1 + ) + input_topo = {"r1": topo["routers"]["r1"]} + result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop) + assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result) + result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol) + assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result) + + step("Kill BGP on R1") + + kill_router_daemons(tgen, "r1", ["bgpd"]) + + step("Verify on R2 and R1 that none of the routers keep stale entries") + + for addr_type in ADDR_TYPES: + dut = "r1" + peer = "r2" + protocol = "bgp" + next_hop = next_hop_per_address_family( + tgen, dut, peer, addr_type, NEXT_HOP_IP_2 + ) + input_topo = {"r2": topo["routers"]["r2"]} + result = verify_rib( + tgen, addr_type, dut, input_topo, next_hop, protocol, expected=False + ) + assert result is not True, ( + "Testcase {} : Failed \n " + "r1: routes are still present in ZEBRA\n Error: {}".format(tc_name, result) + ) + + dut = "r2" + peer = "r1" + next_hop = next_hop_per_address_family( + tgen, dut, peer, addr_type, NEXT_HOP_IP_1 + ) + input_topo = {"r1": topo["routers"]["r1"]} + result = verify_bgp_rib( + tgen, addr_type, dut, input_topo, next_hop, expected=False + ) + assert result is not True, ( + "Testcase {} : Failed \n " + "r2: routes are still present in BGP RIB\n Error: {}".format( + tc_name, result + ) + ) + result = verify_rib( + tgen, addr_type, dut, input_topo, next_hop, protocol, expected=False + ) + assert result is not True, ( + "Testcase {} : Failed \n " + "r2: routes are still present in ZEBRA\n Error: {}".format(tc_name, result) + ) + + step("Bring up BGP on R1 and remove Peer-level GR config from R1") + + start_router_daemons(tgen, "r1", ["bgpd"]) + + input_dict = { + "r1": { + "bgp": { + "address_family": { + "ipv4": { + "unicast": { + "neighbor": { + "r2": { + "dest_link": { + "r1-link1": {"graceful-restart-disable": False} + } + } + } + } + }, + "ipv6": { + "unicast": { + "neighbor": { + "r2": { + "dest_link": { + "r1-link1": {"graceful-restart-disable": False} + } + } + } + } + }, + } + } + } + } + + configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r2") + + step("Verify on R2 that R1 advertises GR capabilities as a restarting node") + + input_dict = { + "r1": { + "bgp": { + "graceful-restart": { + "graceful-restart": True, + } + } + }, + "r2": {"bgp": {"graceful-restart": {"graceful-restart-helper": True}}}, + } + + for addr_type in ADDR_TYPES: + result = verify_graceful_restart( + tgen, topo, addr_type, input_dict, dut="r1", peer="r2" + ) + assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result) + result = verify_graceful_restart( + tgen, topo, addr_type, input_dict, dut="r2", peer="r1" + ) + assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result) + + for addr_type in ADDR_TYPES: + dut = "r1" + peer = "r2" + protocol = "bgp" + next_hop = next_hop_per_address_family( + tgen, dut, peer, addr_type, NEXT_HOP_IP_2 + ) + input_topo = {"r2": topo["routers"]["r2"]} + result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol) + assert ( + result is True + ), "Testcase {} :Failed \n Routes are still present \n Error {}".format( + tc_name, result + ) + + dut = "r2" + peer = "r1" + next_hop = next_hop_per_address_family( + tgen, dut, peer, addr_type, NEXT_HOP_IP_1 + ) + input_topo = {"r1": topo["routers"]["r1"]} + result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop) + assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result) + result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol) + assert ( + result is True + ), "Testcase {} :Failed \n Routes are still present \n Error {}".format( + tc_name, result + ) + + step("Kill BGP on R1") + + kill_router_daemons(tgen, "r1", ["bgpd"]) + + step( + "Verify that R1 keeps the stale entries in FIB and R2 keeps stale entries in RIB & FIB" + ) + + for addr_type in ADDR_TYPES: + dut = "r1" + peer = "r2" + protocol = "bgp" + next_hop = next_hop_per_address_family( + tgen, dut, peer, addr_type, NEXT_HOP_IP_2 + ) + input_topo = {"r2": topo["routers"]["r2"]} + result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol) + assert ( + result is True + ), "Testcase {} :Failed \n Routes are still present \n Error {}".format( + tc_name, result + ) + + dut = "r2" + peer = "r1" + next_hop = next_hop_per_address_family( + tgen, dut, peer, addr_type, NEXT_HOP_IP_1 + ) + input_topo = {"r1": topo["routers"]["r1"]} + result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop) + assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result) + result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol) + assert ( + result is True + ), "Testcase {} :Failed \n Routes are still present \n Error {}".format( + tc_name, result + ) + + write_test_footer(tc_name) + + +def test_BGP_GR_TC_49_p1(request): + """ + Test Objective : Peer-level inherit from Global Restarting + Global Mode : GR Restart + PerPeer Mode : None + GR Mode effective : GR Restart + + """ + + tgen = get_topogen() + tc_name = request.node.name + write_test_header(tc_name) + + # Check router status + check_router_status(tgen) + + # Don't run this test if we have any failure. + if tgen.routers_have_failure(): + pytest.skip(tgen.errors) + + # Creating configuration from JSON + reset_config_on_routers(tgen) + + step("Configure R1 as GR restarting node in global level") + + input_dict = { + "r1": {"bgp": {"graceful-restart": {"graceful-restart": True}}}, + "r2": {"bgp": {"graceful-restart": {"graceful-restart-helper": True}}}, + } + + configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r2") + + step( + "Verify that R2 receives GR restarting capabilities" + " from R1 based on inheritence" + ) + + for addr_type in ADDR_TYPES: + result = verify_graceful_restart( + tgen, topo, addr_type, input_dict, dut="r1", peer="r2" + ) + assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result) + result = verify_graceful_restart( + tgen, topo, addr_type, input_dict, dut="r2", peer="r1" + ) + assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result) + + for addr_type in ADDR_TYPES: + dut = "r1" + peer = "r2" + protocol = "bgp" + next_hop = next_hop_per_address_family( + tgen, dut, peer, addr_type, NEXT_HOP_IP_2 + ) + input_topo = {"r2": topo["routers"]["r2"]} + result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol) + assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result) + + dut = "r2" + peer = "r1" + next_hop = next_hop_per_address_family( + tgen, dut, peer, addr_type, NEXT_HOP_IP_1 + ) + input_topo = {"r1": topo["routers"]["r1"]} + result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop) + assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result) + result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol) + assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result) + + step("Kill BGPd on router R1") + + kill_router_daemons(tgen, "r1", ["bgpd"]) + + step( + "Verify that R1 keeps the stale entries in FIB and R2 keeps stale entries in RIB & FIB" + ) + + for addr_type in ADDR_TYPES: + dut = "r1" + peer = "r2" + protocol = "bgp" + next_hop = next_hop_per_address_family( + tgen, dut, peer, addr_type, NEXT_HOP_IP_2 + ) + input_topo = {"r2": topo["routers"]["r2"]} + result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol) + assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result) + + dut = "r2" + peer = "r1" + next_hop = next_hop_per_address_family( + tgen, dut, peer, addr_type, NEXT_HOP_IP_1 + ) + input_topo = {"r1": topo["routers"]["r1"]} + result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop) + assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result) + result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol) + assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result) + + write_test_footer(tc_name) + + +def BGP_GR_TC_52_p1(request): + """ + Test Objective : Transition from Peer-level disable to Global inherit helper + Global Mode : None + PerPeer Mode : GR Disable + GR Mode effective : GR Disable + + """ + + tgen = get_topogen() + tc_name = request.node.name + write_test_header(tc_name) + + # Check router status + check_router_status(tgen) + + # Don't run this test if we have any failure. + if tgen.routers_have_failure(): + pytest.skip(tgen.errors) + + # Creating configuration from JSON + reset_config_on_routers(tgen) + + step( + "Configure R1 as GR disabled node at per Peer-level for R2" + " & R2 as GR restarting node" + ) + + input_dict = { + "r1": { + "bgp": { + "address_family": { + "ipv4": { + "unicast": { + "neighbor": { + "r2": { + "dest_link": { + "r1-link1": {"graceful-restart-disable": True} + } + } + } + } + }, + "ipv6": { + "unicast": { + "neighbor": { + "r2": { + "dest_link": { + "r1-link1": {"graceful-restart-disable": True} + } + } + } + } + }, + } + } + }, + "r2": {"bgp": {"graceful-restart": {"graceful-restart": True}}}, + } + + configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r2") + + step("Verify on R2 that R1 does't advertise any GR capabilities") + + for addr_type in ADDR_TYPES: + result = verify_graceful_restart( + tgen, topo, addr_type, input_dict, dut="r1", peer="r2" + ) + assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result) + result = verify_graceful_restart( + tgen, topo, addr_type, input_dict, dut="r2", peer="r1" + ) + assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result) + + for addr_type in ADDR_TYPES: + dut = "r2" + peer = "r1" + protocol = "bgp" + next_hop = next_hop_per_address_family( + tgen, dut, peer, addr_type, NEXT_HOP_IP_1 + ) + input_topo = {"r1": topo["routers"]["r1"]} + result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol) + assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result) + + dut = "r1" + peer = "r2" + next_hop = next_hop_per_address_family( + tgen, dut, peer, addr_type, NEXT_HOP_IP_2 + ) + input_topo = {"r2": topo["routers"]["r2"]} + result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop) + assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result) + result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol) + assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result) + + step("Kill BGP on R2") + + kill_router_daemons(tgen, "r2", ["bgpd"]) + + step( + "Verify that R2 keeps the stale entries in FIB & R1 doesn't keep RIB & FIB entries." + ) + + for addr_type in ADDR_TYPES: + dut = "r2" + peer = "r1" + protocol = "bgp" + next_hop = next_hop_per_address_family( + tgen, dut, peer, addr_type, NEXT_HOP_IP_1 + ) + input_topo = {"r1": topo["routers"]["r1"]} + result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol) + assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result) + + dut = "r1" + peer = "r2" + next_hop = next_hop_per_address_family( + tgen, dut, peer, addr_type, NEXT_HOP_IP_2 + ) + input_topo = {"r2": topo["routers"]["r2"]} + result = verify_bgp_rib( + tgen, addr_type, dut, input_topo, next_hop, expected=False + ) + assert result is not True, ( + "Testcase {} : Failed \n " + "r1: routes are still present in BGP RIB\n Error: {}".format( + tc_name, result + ) + ) + result = verify_rib( + tgen, addr_type, dut, input_topo, next_hop, protocol, expected=False + ) + assert result is not True, ( + "Testcase {} : Failed \n " + "r1: routes are still present in ZEBRA\n Error: {}".format(tc_name, result) + ) + + step("Bring up BGP on R2 and remove Peer-level GR config from R1") + + start_router_daemons(tgen, "r2", ["bgpd"]) + + input_dict = { + "r1": { + "bgp": { + "address_family": { + "ipv4": { + "unicast": { + "neighbor": { + "r2": { + "dest_link": { + "r1-link1": {"graceful-restart-disable": False} + } + } + } + } + }, + "ipv6": { + "unicast": { + "neighbor": { + "r2": { + "dest_link": { + "r1-link1": {"graceful-restart-disable": False} + } + } + } + } + }, + } + } + } + } + + configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r2") + + step( + "Verify on R2 that R1 advertises GR capabilities as a helper node from global inherit" + ) + + input_dict = { + "r1": {"bgp": {"graceful-restart": {"graceful-restart-helper": True}}}, + "r2": {"bgp": {"graceful-restart": {"graceful-restart": True}}}, + } + + for addr_type in ADDR_TYPES: + result = verify_graceful_restart( + tgen, topo, addr_type, input_dict, dut="r1", peer="r2" + ) + assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result) + result = verify_graceful_restart( + tgen, topo, addr_type, input_dict, dut="r2", peer="r1" + ) + assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result) + + for addr_type in ADDR_TYPES: + dut = "r2" + peer = "r1" + protocol = "bgp" + next_hop = next_hop_per_address_family( + tgen, dut, peer, addr_type, NEXT_HOP_IP_1 + ) + input_topo = {"r1": topo["routers"]["r1"]} + result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol) + assert ( + result is True + ), "Testcase {} :Failed \n Routes are still present \n Error {}".format( + tc_name, result + ) + + dut = "r1" + peer = "r2" + next_hop = next_hop_per_address_family( + tgen, dut, peer, addr_type, NEXT_HOP_IP_2 + ) + input_topo = {"r2": topo["routers"]["r2"]} + result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop) + assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result) + result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol) + assert ( + result is True + ), "Testcase {} :Failed \n Routes are still present \n Error {}".format( + tc_name, result + ) + + step("Kill BGP on R2") + + kill_router_daemons(tgen, "r2", ["bgpd"]) + + step( + "Verify that R2 keeps the stale entries in FIB & R1 keeps stale entries in RIB & FIB" + ) + + for addr_type in ADDR_TYPES: + dut = "r2" + peer = "r1" + protocol = "bgp" + next_hop = next_hop_per_address_family( + tgen, dut, peer, addr_type, NEXT_HOP_IP_1 + ) + input_topo = {"r1": topo["routers"]["r1"]} + result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol) + assert ( + result is True + ), "Testcase {} :Failed \n Routes are still present \n Error {}".format( + tc_name, result + ) + + dut = "r1" + peer = "r2" + next_hop = next_hop_per_address_family( + tgen, dut, peer, addr_type, NEXT_HOP_IP_2 + ) + input_topo = {"r2": topo["routers"]["r2"]} + result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop) + assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result) + result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol) + assert ( + result is True + ), "Testcase {} :Failed \n Routes are still present \n Error {}".format( + tc_name, result + ) + + write_test_footer(tc_name) + + +if __name__ == "__main__": + args = ["-s"] + sys.argv[1:] + sys.exit(pytest.main(args)) |