From 2c7cac91ed6e7db0f6937923d2b57f97dbdbc337 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 28 Apr 2024 11:53:30 +0200 Subject: Adding upstream version 8.4.4. Signed-off-by: Daniel Baumann --- tests/topotests/bgp_gshut/test_bgp_gshut.py | 356 ++++++++++++++++++++++++++++ 1 file changed, 356 insertions(+) create mode 100644 tests/topotests/bgp_gshut/test_bgp_gshut.py (limited to 'tests/topotests/bgp_gshut/test_bgp_gshut.py') diff --git a/tests/topotests/bgp_gshut/test_bgp_gshut.py b/tests/topotests/bgp_gshut/test_bgp_gshut.py new file mode 100644 index 0000000..764252d --- /dev/null +++ b/tests/topotests/bgp_gshut/test_bgp_gshut.py @@ -0,0 +1,356 @@ +#!/usr/bin/env python + +# +# test_bgp_gshut.py +# Part of NetDEF Topology Tests +# +# Copyright (c) 2020 by +# Vivek Venkatraman +# +# Permission to use, copy, modify, and/or distribute this software +# for any purpose with or without fee is hereby granted, provided +# that the above copyright notice and this permission notice appear +# in all copies. +# +# THE SOFTWARE IS PROVIDED "AS IS" AND NETDEF DISCLAIMS ALL WARRANTIES +# WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL NETDEF BE LIABLE FOR +# ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY +# DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +# WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS +# ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE +# OF THIS SOFTWARE. +# + +""" +Test the ability to initiate and stop BGP graceful shutdown. +Test both the vrf-specific and global configuration and operation. + +r1 +| +r2----r3 +| \ +| \ +r4 r5 + + +r2 is UUT and peers with r1 and r3 in default bgp instance and +with r4 and r5 in vrf vrf1. +r1-r2 peering is iBGP and the other peerings are eBGP. + +Check r2 initial convergence in default table +Define update-delay with max-delay in the default bgp instance on r2 +Shutdown peering on r1 toward r2 so that delay timers can be exercised +Clear bgp neighbors on r2 and then check for the 'in progress' indicator +Check that r2 only installs route learned from r4 after the max-delay timer expires +Define update-delay with max-delay and estabish-wait and check json output showing set +Clear neighbors on r2 and check that r3 installs route from r4 after establish-wait time +Remove update-delay timer on r2 to verify that it goes back to normal behavior +Clear neighbors on r2 and check that route install time on r2 does not delay +Define global bgp update-delay with max-delay and establish-wait on r2 +Check that r2 default instance and vrf1 have the max-delay and establish set +Clear neighbors on r2 and check route-install time is after the establish-wait timer + +Note that the keepalive/hold times were changed to 3/9 and the connect retry timer +to 10 to improve the odds the convergence timing in this test case is useful in the +event of packet loss. +""" + +import os +import re +import sys +import json +import pytest +import platform +from functools import partial + +CWD = os.path.dirname(os.path.realpath(__file__)) +sys.path.append(os.path.join(CWD, "../")) + +# pylint: disable=C0413 +from lib import topotest +from lib.topogen import Topogen, TopoRouter, get_topogen +from lib.topolog import logger + +pytestmark = [pytest.mark.bgpd] + + +def build_topo(tgen): + for routern in range(1, 6): + tgen.add_router("r{}".format(routern)) + + switch = tgen.add_switch("s1") + switch.add_link(tgen.gears["r1"]) + switch.add_link(tgen.gears["r2"]) + + switch = tgen.add_switch("s2") + switch.add_link(tgen.gears["r2"]) + switch.add_link(tgen.gears["r3"]) + + switch = tgen.add_switch("s3") + switch.add_link(tgen.gears["r2"]) + switch.add_link(tgen.gears["r4"]) + + switch = tgen.add_switch("s4") + switch.add_link(tgen.gears["r2"]) + switch.add_link(tgen.gears["r5"]) + + +def _run_cmd_and_check(router, cmd, results_file, retries=100, intvl=0.5): + json_file = "{}/{}".format(CWD, results_file) + expected = json.loads(open(json_file).read()) + test_func = partial(topotest.router_json_cmp, router, cmd, expected) + return topotest.run_and_expect(test_func, None, retries, intvl) + + +def setup_module(mod): + tgen = Topogen(build_topo, mod.__name__) + tgen.start_topology() + + router_list = tgen.routers() + krel = platform.release() + if topotest.version_cmp(krel, "4.5") < 0: + tgen.errors = "Linux kernel version of at least 4.5 needed for bgp-gshut tests" + pytest.skip(tgen.errors) + + # Configure vrf and its slaves in the kernel on r2 + r2 = tgen.gears["r2"] + r2.run("ip link add vrf1 type vrf table 1000") + r2.run("ip link set vrf1 up") + r2.run("ip link set r2-eth2 master vrf1") + r2.run("ip link set r2-eth3 master vrf1") + + # Load FRR config and initialize all routers + for i, (rname, router) in enumerate(router_list.items(), 1): + router.load_config( + TopoRouter.RD_ZEBRA, os.path.join(CWD, "{}/zebra.conf".format(rname)) + ) + router.load_config( + TopoRouter.RD_BGP, os.path.join(CWD, "{}/bgpd.conf".format(rname)) + ) + + tgen.start_router() + + # Basic peering test to see if things are ok + _, result = _run_cmd_and_check(r2, "show ip bgp summary json", "r2/bgp_sum_1.json") + assertmsg = "R2: Basic sanity test after init failed -- global peerings not up" + assert result is None, assertmsg + + _, result = _run_cmd_and_check( + r2, "show ip bgp vrf vrf1 summary json", "r2/bgp_sum_2.json" + ) + assertmsg = "R2: Basic sanity test after init failed -- VRF peerings not up" + assert result is None, assertmsg + + +def teardown_module(mod): + tgen = get_topogen() + tgen.stop_topology() + + +def test_bgp_gshut(): + tgen = get_topogen() + + if tgen.routers_have_failure(): + pytest.skip(tgen.errors) + + r1 = tgen.gears["r1"] + r2 = tgen.gears["r2"] + r3 = tgen.gears["r3"] + r4 = tgen.gears["r4"] + r5 = tgen.gears["r5"] + + # Verify initial route states + logger.info("\nVerify initial route states") + + _, result = _run_cmd_and_check( + r1, "show ip bgp 13.1.1.1/32 json", "r1/bgp_route_1.json" + ) + assertmsg = "R1: Route 13.1.1.1/32 not present or has unexpected params" + assert result is None, assertmsg + + _, result = _run_cmd_and_check( + r3, "show ip bgp 11.1.1.1/32 json", "r3/bgp_route_1.json" + ) + assertmsg = "R3: Route 11.1.1.1/32 not present or has unexpected params" + assert result is None, assertmsg + + _, result = _run_cmd_and_check( + r5, "show ip bgp 14.1.1.1/32 json", "r5/bgp_route_1.json" + ) + assertmsg = "R5: Route 14.1.1.1/32 not present or has unexpected params" + assert result is None, assertmsg + + logger.info("\nInitial route states are as expected") + + # "Test #1: Enable BGP-wide graceful-shutdown on R2 and check routes on peers" + logger.info( + "\nTest #1: Enable BGP-wide graceful-shutdown on R2 and check routes on peers" + ) + + r2.vtysh_cmd( + """ + configure terminal + bgp graceful-shutdown + """ + ) + + # R1, R3 and R5 should see routes from R2 with GSHUT. In addition, + # R1 should see LOCAL_PREF of 0 + _, result = _run_cmd_and_check( + r1, "show ip bgp 13.1.1.1/32 json", "r1/bgp_route_2.json" + ) + assertmsg = "R1: Route 13.1.1.1/32 not present or has unexpected params" + assert result is None, assertmsg + + _, result = _run_cmd_and_check( + r3, "show ip bgp 11.1.1.1/32 json", "r3/bgp_route_2.json" + ) + assertmsg = "R3: Route 11.1.1.1/32 not present or has unexpected params" + assert result is None, assertmsg + + _, result = _run_cmd_and_check( + r5, "show ip bgp 14.1.1.1/32 json", "r5/bgp_route_2.json" + ) + assertmsg = "R5: Route 14.1.1.1/32 not present or has unexpected params" + assert result is None, assertmsg + + logger.info( + "\nTest #1: Successful, routes have GSHUT and/or LPREF of 0 as expected" + ) + + # "Test #2: Turn off BGP-wide graceful-shutdown on R2 and check routes on peers" + logger.info( + "\nTest #2: Turn off BGP-wide graceful-shutdown on R2 and check routes on peers" + ) + + r2.vtysh_cmd( + """ + configure terminal + no bgp graceful-shutdown + """ + ) + + # R1, R3 and R5 should see routes from R2 with their original attributes + _, result = _run_cmd_and_check( + r1, "show ip bgp 13.1.1.1/32 json", "r1/bgp_route_1.json" + ) + assertmsg = "R1: Route 13.1.1.1/32 not present or has unexpected params" + assert result is None, assertmsg + + _, result = _run_cmd_and_check( + r3, "show ip bgp 11.1.1.1/32 json", "r3/bgp_route_1.json" + ) + assertmsg = "R3: Route 11.1.1.1/32 not present or has unexpected params" + assert result is None, assertmsg + + _, result = _run_cmd_and_check( + r5, "show ip bgp 14.1.1.1/32 json", "r5/bgp_route_1.json" + ) + assertmsg = "R5: Route 14.1.1.1/32 not present or has unexpected params" + assert result is None, assertmsg + + logger.info( + "\nTest #2: Successful, routes have their original attributes with default LPREF and without GSHUT" + ) + + # "Test #3: Enable graceful-shutdown on R2 only in VRF1 and check routes on peers" + logger.info( + "\nTest #3: Enable graceful-shutdown on R2 only in VRF1 and check routes on peers" + ) + + r2.vtysh_cmd( + """ + configure terminal + router bgp 65001 vrf vrf1 + bgp graceful-shutdown + """ + ) + + # R1 and R3 should see no change to their routes + _, result = _run_cmd_and_check( + r1, "show ip bgp 13.1.1.1/32 json", "r1/bgp_route_1.json" + ) + assertmsg = "R1: Route 13.1.1.1/32 not present or has unexpected params" + assert result is None, assertmsg + + _, result = _run_cmd_and_check( + r3, "show ip bgp 11.1.1.1/32 json", "r3/bgp_route_1.json" + ) + assertmsg = "R3: Route 11.1.1.1/32 not present or has unexpected params" + assert result is None, assertmsg + + # R5 should see routes from R2 with GSHUT. + _, result = _run_cmd_and_check( + r5, "show ip bgp 14.1.1.1/32 json", "r5/bgp_route_2.json" + ) + assertmsg = "R5: Route 14.1.1.1/32 not present or has unexpected params" + assert result is None, assertmsg + + logger.info("\nTest #3: Successful, only VRF peers like R5 see routes with GSHUT") + + # "Test #4: Try to enable BGP-wide graceful-shutdown on R2 while it is configured in VRF1" + logger.info( + "\nTest #4: Try to enable BGP-wide graceful-shutdown on R2 while it is configured in VRF1" + ) + + ret = r2.vtysh_cmd( + """ + configure terminal + bgp graceful-shutdown + """ + ) + + # This should fail + assertmsg = "R2: BGP-wide graceful-shutdown config not rejected even though it is enabled in VRF1" + assert ( + re.search("global graceful-shutdown not permitted", ret) is not None + ), assertmsg + + logger.info( + "\nTest #4: Successful, BGP-wide graceful-shutdown rejected as it is enabled in VRF" + ) + + # "Test #5: Turn off graceful-shutdown on R2 in VRF1 and check routes on peers" + logger.info( + "\nTest #5: Turn off graceful-shutdown on R2 in VRF1 and check routes on peers" + ) + + r2.vtysh_cmd( + """ + configure terminal + router bgp 65001 vrf vrf1 + no bgp graceful-shutdown + """ + ) + + # R1 and R3 should see no change to their routes + _, result = _run_cmd_and_check( + r1, "show ip bgp 13.1.1.1/32 json", "r1/bgp_route_1.json" + ) + assertmsg = "R1: Route 13.1.1.1/32 not present or has unexpected params" + assert result is None, assertmsg + + _, result = _run_cmd_and_check( + r3, "show ip bgp 11.1.1.1/32 json", "r3/bgp_route_1.json" + ) + assertmsg = "R3: Route 11.1.1.1/32 not present or has unexpected params" + assert result is None, assertmsg + + # R5 should see routes from R2 with original attributes. + _, result = _run_cmd_and_check( + r5, "show ip bgp 14.1.1.1/32 json", "r5/bgp_route_1.json" + ) + assertmsg = "R5: Route 14.1.1.1/32 not present or has unexpected params" + assert result is None, assertmsg + + logger.info( + "\nTest #5: Successful, routes have their original attributes with default LPREF and without GSHUT" + ) + + # tgen.mininet_cli() + + +if __name__ == "__main__": + args = ["-s"] + sys.argv[1:] + sys.exit(pytest.main(args)) -- cgit v1.2.3