/* * EIGRP Definition of Constants. * Copyright (C) 2013-2016 * Authors: * Donnie Savage * Jan Janovic * Matej Perina * Peter Orsag * Peter Paluch * Frantisek Gazo * Tomas Hvorkovy * Martin Kontsek * Lukas Koribsky * * This file is part of GNU Zebra. * * GNU Zebra is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2, or (at your option) any * later version. * * GNU Zebra is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * General Public License for more details. * * You should have received a copy of the GNU General Public License along * with this program; see the file COPYING; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ #ifndef _ZEBRA_EIGRP_CONST_H_ #define _ZEBRA_EIGRP_CONST_H_ #define EIGRP_NEIGHBOR_DOWN 0 #define EIGRP_NEIGHBOR_PENDING 1 #define EIGRP_NEIGHBOR_UP 2 #define EIGRP_NEIGHBOR_STATE_MAX 3 /*Packet requiring ack will be retransmitted again after this time*/ #define EIGRP_PACKET_RETRANS_TIME 2 /* in seconds */ #define EIGRP_PACKET_RETRANS_MAX 16 /* number of retrans attempts */ #define PLAINTEXT_LENGTH 81 /*Metric variance multiplier*/ #define EIGRP_VARIANCE_DEFAULT 1 #define EIGRP_MAX_PATHS_DEFAULT 4 /* Return values of functions involved in packet verification */ #define MSG_OK 0 #define MSG_NG 1 #define EIGRP_HEADER_VERSION 2 /* Default protocol, port number. */ #ifndef IPPROTO_EIGRPIGP #define IPPROTO_EIGRPIGP 88 #endif /* IPPROTO_EIGRPIGP */ #define EIGRP_AUTH_MD5_TLV_SIZE 40 #define EIGRP_AUTH_SHA256_TLV_SIZE 56 /*Cisco routers use only first 44 bytes of basic hello for their MD5 * calculations*/ #define EIGRP_MD5_BASIC_COMPUTE 44 #define EIGRP_MD5_UPDATE_INIT_COMPUTE 40 #define EIGRP_AUTH_BASIC_HELLO_FLAG 0x01 #define EIGRP_AUTH_TID_HELLO_FLAG 0x02 #define EIGRP_AUTH_UPDATE_INIT_FLAG 0x04 #define EIGRP_AUTH_UPDATE_FLAG 0x08 #define EIGRP_AUTH_EXTRA_SALT_FLAG 0x10 #define EIGRP_NEXT_SEQUENCE_TLV_SIZE 8 /* IP TTL for EIGRP protocol. */ #define EIGRP_IP_TTL 1 /* VTY port number. */ #define EIGRP_VTY_PORT 2613 /* Default configuration file name for eigrp. */ #define EIGRP_DEFAULT_CONFIG "eigrpd.conf" #define EIGRP_HELLO_INTERVAL_DEFAULT 5 #define EIGRP_HOLD_INTERVAL_DEFAULT 15 #define EIGRP_BANDWIDTH_DEFAULT 100000 #define EIGRP_DELAY_DEFAULT 10 #define EIGRP_RELIABILITY_DEFAULT 255 #define EIGRP_LOAD_DEFAULT 1 #define EIGRP_MULTICAST_ADDRESS 0xe000000A /*224.0.0.10*/ #define EIGRP_MAX_METRIC 0xffffffffU /*4294967295*/ enum metric_change { METRIC_DECREASE, METRIC_SAME, METRIC_INCREASE }; #define DEFAULT_ROUTE ZEBRA_ROUTE_MAX #define DEFAULT_ROUTE_TYPE(T) ((T) == DEFAULT_ROUTE) #define INTERFACE_DOWN_BY_ZEBRA 1 #define INTERFACE_DOWN_BY_VTY 2 #define INTERFACE_DOWN_BY_FINAL 3 #define EIGRP_HELLO_NORMAL 0x00 #define EIGRP_HELLO_GRACEFUL_SHUTDOWN 0x01 #define EIGRP_HELLO_ADD_SEQUENCE 0x02 #define EIGRP_HELLO_GRACEFUL_SHUTDOWN_NBR 0x04 /* EIGRP Network Type. */ #define EIGRP_IFTYPE_NONE 0 #define EIGRP_IFTYPE_POINTOPOINT 1 #define EIGRP_IFTYPE_BROADCAST 2 #define EIGRP_IFTYPE_LOOPBACK 3 #define EIGRP_IFTYPE_MAX 4 #define EIGRP_IF_ACTIVE 0 #define EIGRP_IF_PASSIVE 1 /* EIGRP TT destination type */ #define EIGRP_TOPOLOGY_TYPE_CONNECTED 0 // Connected network #define EIGRP_TOPOLOGY_TYPE_REMOTE 1 // Remote internal network #define EIGRP_TOPOLOGY_TYPE_REMOTE_EXTERNAL 2 // Remote external network /*EIGRP TT entry flags*/ #define EIGRP_ROUTE_DESCRIPTOR_SUCCESSOR_FLAG (1 << 0) #define EIGRP_ROUTE_DESCRIPTOR_FSUCCESSOR_FLAG (1 << 1) #define EIGRP_ROUTE_DESCRIPTOR_INTABLE_FLAG (1 << 2) #define EIGRP_ROUTE_DESCRIPTOR_EXTERNAL_FLAG (1 << 3) /*EIGRP FSM state count, event count*/ #define EIGRP_FSM_STATE_MAX 5 #define EIGRP_FSM_EVENT_MAX 16 /*EEGRP FSM states*/ enum eigrp_fsm_states { EIGRP_FSM_STATE_PASSIVE, EIGRP_FSM_STATE_ACTIVE_0, EIGRP_FSM_STATE_ACTIVE_1, EIGRP_FSM_STATE_ACTIVE_2, EIGRP_FSM_STATE_ACTIVE_3, }; /*EIGRP FSM events return values*/ #define EIGRP_FSM_NEED_UPDATE 1 #define EIGRP_FSM_NEED_QUERY 2 /*EIGRP FSM events*/ enum eigrp_fsm_events { /* * Input event other than query from succ, * FC is not satisfied */ EIGRP_FSM_EVENT_NQ_FCN, /* last reply, FD is reset */ EIGRP_FSM_EVENT_LR, /* Query from succ, FC not satisfied */ EIGRP_FSM_EVENT_Q_FCN, /* last reply, FC satisifed with current value of FDij */ EIGRP_FSM_EVENT_LR_FCS, /* distance increase while in a active state */ EIGRP_FSM_EVENT_DINC, /* Query from succ while in active state */ EIGRP_FSM_EVENT_QACT, /* last reply, FC not satisfied */ EIGRP_FSM_EVENT_LR_FCN, /* * state not changed * usually by receiving not last reply */ EIGRP_FSM_KEEP_STATE, }; /** * External routes originate from some other protocol - these are them */ #define NULL_PROTID 0 /*!< unknown protocol */ #define IGRP_PROTID 1 /*!< IGRP.. whos your daddy! */ #define EIGRP_PROTID 2 /*!< EIGRP - Just flat out the best */ #define STATIC_PROTID 3 /*!< Staticly configured source */ #define RIP_PROTID 4 /*!< Routing Information Protocol */ #define HELLO_PROTID 5 /*!< Hello? RFC-891 you there? */ #define OSPF_PROTID 6 /*!< OSPF - Open Shortest Path First */ #define ISIS_PROTID 7 /*!< Intermediate System To Intermediate System */ #define EGP_PROTID 8 /*!< Exterior Gateway Protocol */ #define BGP_PROTID 9 /*!< Border Gateway Protocol */ #define IDRP_PROTID 10 /*!< InterDomain Routing Protocol */ #define CONN_PROTID 11 /*!< Connected source */ /* * metric k-value defaults */ #define EIGRP_K1_DEFAULT 1 //!< unweighed inverse bandwidth #define EIGRP_K2_DEFAULT 0 //!< no loading term #define EIGRP_K3_DEFAULT 1 //!< unweighted delay #define EIGRP_K4_DEFAULT 0 //!< no reliability term #define EIGRP_K5_DEFAULT 0 //!< no reliability term #define EIGRP_K6_DEFAULT 0 //!< do not add in extended metrics /* * EIGRP Fixed header */ #define EIGRP_HEADER_LEN 20U #define EIGRP_PACKET_MAX_LEN 65535U /* includes IP Header size. */ #define EIGRP_TLV_HDR_LENGTH 4 /** * EIGRP Packet Opcodes */ #define EIGRP_OPC_UPDATE 1 /*!< packet containing routing information */ #define EIGRP_OPC_REQUEST 2 /*!< sent to request one or more routes */ #define EIGRP_OPC_QUERY 3 /*!< sent when a routing is in active start */ #define EIGRP_OPC_REPLY 4 /*!< sent in response to a query */ #define EIGRP_OPC_HELLO 5 /*!< sent to maintain a peering session */ #define EIGRP_OPC_IPXSAP 6 /*!< IPX SAP information */ #define EIGRP_OPC_PROBE 7 /*!< for test purposes */ #define EIGRP_OPC_ACK 8 /*!< acknowledge */ #define EIGRP_OPC_SIAQUERY 10 /*!< QUERY - with relaxed restrictions */ #define EIGRP_OPC_SIAREPLY 11 /*!< REPLY - may contain old routing information */ /** * EIGRP TLV Range definitions * PDM TLV Range * General 0x0000 * IPv4 0x0100 ** TLVs for one and all * ATALK 0x0200 ** legacy * IPX 0x0300 ** discontinued * IPv6 0x0400 ** legacy * Multiprotocol 0x0600 ** wide metrics * MultiTopology 0x00f0 ** deprecated */ #define EIGRP_TLV_RANGEMASK 0xfff0 /*!< should be 0xff00 - opps */ #define EIGRP_TLV_GENERAL 0x0000 /** * 1.2 TLV Definitions ** legacy * These are considered legacyu and are only used for backward compability with * older Cisco Routers. They should not be your first choice for packet codings */ #define EIGRP_TLV_IPv4 0x0100 /*!< Classic IPv4 TLV encoding */ #define EIGRP_TLV_ATALK 0x0200 /*!< Classic Appletalk TLV encoding*/ #define EIGRP_TLV_IPX 0x0300 /*!< Classic IPX TLV encoding */ #define EIGRP_TLV_IPv6 0x0400 /*!< Classic IPv6 TLV encoding */ /** * 2.0 Multi-Protocol TLV Definitions * These are the current packet formats and should be used for packets */ #define EIGRP_TLV_MP 0x0600 /*!< Non-PDM specific encoding */ /** * TLV type definitions. Generic (protocol-independent) TLV types are * defined here. Protocol-specific ones are defined elsewhere. */ #define EIGRP_TLV_PARAMETER (EIGRP_TLV_GENERAL | 0x0001) /*!< eigrp parameters */ #define EIGRP_TLV_PARAMETER_LEN (12U) #define EIGRP_TLV_AUTH (EIGRP_TLV_GENERAL | 0x0002) /*!< authentication */ #define EIGRP_TLV_SEQ (EIGRP_TLV_GENERAL | 0x0003) /*!< sequenced packet */ #define EIGRP_TLV_SEQ_BASE_LEN (5U) #define EIGRP_TLV_SW_VERSION (EIGRP_TLV_GENERAL | 0x0004) /*!< software version */ #define EIGRP_TLV_SW_VERSION_LEN (8U) #define EIGRP_TLV_NEXT_MCAST_SEQ (EIGRP_TLV_GENERAL | 0x0005) /*!< sequence number */ #define EIGRP_TLV_PEER_TERMINATION (EIGRP_TLV_GENERAL | 0x0007) /*!< peer termination */ #define EIGRP_TLV_PEER_TERMINATION_LEN (9U) #define EIGRP_TLV_PEER_TIDLIST (EIGRP_TLV_GENERAL | 0x0008) /*!< peer sub-topology list */ /* Older cisco routers send TIDLIST value wrong, adding for backwards * compatabily */ #define EIGRP_TLV_PEER_MTRLIST (EIGRP_TLV_GENERAL | 0x00f5) /** * Route Based TLVs */ #define EIGRP_TLV_REQUEST 0x0001 #define EIGRP_TLV_INTERNAL 0x0002 #define EIGRP_TLV_EXTERNAL 0x0003 #define EIGRP_TLV_COMMUNITY 0x0004 #define EIGRP_TLV_TYPEMASK 0x000f #define EIGRP_TLV_IPv4_REQ (EIGRP_TLV_IPv4 | EIGRP_TLV_REQUEST) #define EIGRP_TLV_IPv4_INT (EIGRP_TLV_IPv4 | EIGRP_TLV_INTERNAL) #define EIGRP_TLV_IPv4_EXT (EIGRP_TLV_IPv4 | EIGRP_TLV_EXTERNAL) #define EIGRP_TLV_IPv4_COM (EIGRP_TLV_IPv4 | EIGRP_TLV_COMMUNITY) #define EIGRP_TLV_IPV4_SIZE_GRT_24_BIT 0x001D #define EIGRP_TLV_IPV4_SIZE_GRT_16_BIT 0x001C #define EIGRP_TLV_IPV4_SIZE_GRT_8_BIT 0x001B #define EIGRP_TLV_IPV4_SIZE_GRT_0_BIT 0x001A #define EIGRP_TLV_MAX_IPV4_BYTE EIGRP_TLV_IPV4_SIZE_GRT_24_BIT /* max number of TLV IPv4 prefixes in packet */ #define EIGRP_TLV_MAX_IPv4 25 /** * * extdata flag field definitions */ #define EIGRP_OPAQUE_EXT 0x01 /*!< Route is external */ #define EIGRP_OPAQUE_CD 0x02 /*!< Candidate default route */ /** * Address-Family types are taken from: * http://www.iana.org/assignments/address-family-numbers * to provide a standards based exchange of AFI information between * EIGRP routers. */ #define EIGRP_AF_IPv4 1 /*!< IPv4 (IP version 4) */ #define EIGRP_AF_IPv6 2 /*!< IPv6 (IP version 6) */ #define EIGRP_AF_IPX 11 /*!< IPX */ #define EIGRP_AF_ATALK 12 /*!< Appletalk */ #define EIGRP_SF_COMMON 16384 /*!< Cisco Service Family */ #define EIGRP_SF_IPv4 16385 /*!< Cisco IPv4 Service Family */ #define EIGRP_SF_IPv6 16386 /*!< Cisco IPv6 Service Family */ /** * Authentication types supported by EIGRP */ #define EIGRP_AUTH_TYPE_NONE 0 #define EIGRP_AUTH_TYPE_TEXT 1 #define EIGRP_AUTH_TYPE_MD5 2 #define EIGRP_AUTH_TYPE_MD5_LEN 16 #define EIGRP_AUTH_TYPE_SHA256 3 #define EIGRP_AUTH_TYPE_SHA256_LEN 32 /** * opaque flag field definitions */ #define EIGRP_OPAQUE_SRCWD 0x01 /*!< Route Source Withdraw */ #define EIGRP_OPAQUE_ACTIVE 0x04 /*!< Route is currently in active state */ #define EIGRP_OPAQUE_REPL 0x08 /*!< Route is replicated from different tableid */ /** * pak flag bit field definitions - 0 (none)-7 source priority */ #define EIGRP_PRIV_DEFAULT 0x00 /* 0 (none)-7 source priority */ #define EIGRP_PRIV_LOW 0x01 #define EIGRP_PRIV_MEDIUM 0x04 #define EIGRP_PRIV_HIGH 0x07 /* * Init bit definition. First unicast transmitted Update has this * bit set in the flags field of the fixed header. It tells the neighbor * to down-load his topology table. */ #define EIGRP_INIT_FLAG 0x01 /* * CR bit (Conditionally Received) definition in flags field on header. Any * packets with the CR-bit set can be accepted by an EIGRP speaker if and * only if a previous Hello was received with the SEQUENCE_TYPE TLV present. * * This allows multicasts to be transmitted in order and reliably at the * same time as unicasts are transmitted. */ #define EIGRP_CR_FLAG 0x02 /* * RS bit. The Restart flag is set in the hello and the init * update packets during the nsf signaling period. A nsf-aware * router looks at the RS flag to detect if a peer is restarting * and maintain the adjacency. A restarting router looks at * this flag to determine if the peer is helping out with the restart. */ #define EIGRP_RS_FLAG 0x04 /* * EOT bit. The End-of-Table flag marks the end of the start-up updates * sent to a new peer. A nsf restarting router looks at this flag to * determine if it has finished receiving the start-up updates from all * peers. A nsf-aware router waits for this flag before cleaning up * the stale routes from the restarting peer. */ #define EIGRP_EOT_FLAG 0x08 /** * EIGRP Virtual Router ID * * Define values to deal with EIGRP virtual router ids. Virtual * router IDs are stored in the upper short of the EIGRP fixed packet * header. The lower short of the packet header continues to be used * as asystem number. * * Virtual Router IDs are PDM-independent. All PDMs will use * VRID_BASE to indicate the 'base' or 'legacy' EIGRP instance. * All PDMs need to initialize their vrid to VRID_BASE for compatibility * with legacy routers. * Once IPv6 supports 'MTR Multicast', it will use the same VRID as * IPv4. No current plans to support VRIDs on IPX. :) * Initial usage of VRID is to signal usage of Multicast topology for * MTR. * * VRID_MCAST is a well known constant, other VRIDs will be determined * programmatic... * * With the addition of SAF the VRID space has been divided into two * segments 0x0000-0x7fff is for EIGRP and vNets, 0x8000-0xffff is * for saf and its associated vNets. */ #define EIGRP_VRID_MASK 0x8001 #define EIGRP_VRID_AF_BASE 0x0000 #define EIGRP_VRID_MCAST_BASE 0x0001 #define EIGRP_VRID_SF_BASE 0x8000 /* Extended Attributes for a destination */ #define EIGRP_ATTR_HDRLEN (2) #define EIGRP_ATTR_MAXDATA (512) #define EIGRP_ATTR_NOOP 0 /*!< No-Op used as offset padding */ #define EIGRP_ATTR_SCALED 1 /*!< Scaled metric values */ #define EIGRP_ATTR_TAG 2 /*!< Tag assigned by Admin for dest */ #define EIGRP_ATTR_COMM 3 /*!< Community attribute for dest */ #define EIGRP_ATTR_JITTER 4 /*!< Variation in path delay */ #define EIGRP_ATTR_QENERGY 5 /*!< Non-Active energy usage along path */ #define EIGRP_ATTR_ENERGY 6 /*!< Active energy usage along path */ /* * Begin EIGRP-BGP interoperability communities */ #define EIGRP_EXTCOMM_SOO_ASFMT 0x0003 /* Site-of-Origin, BGP AS format */ #define EIGRP_EXTCOMM_SOO_ADRFMT 0x0103 /* Site-of-Origin, BGP/EIGRP addr format */ /* * EIGRP Specific communities */ #define EIGRP_EXTCOMM_EIGRP 0x8800 /* EIGRP route information appended*/ #define EIGRP_EXTCOMM_DAD 0x8801 /* EIGRP AS + Delay */ #define EIGRP_EXTCOMM_VRHB 0x8802 /* EIGRP Vector: Reliability + Hop + BW */ #define EIGRP_EXTCOMM_SRLM 0x8803 /* EIGRP System: Reserve +Load + MTU */ #define EIGRP_EXTCOMM_SAR 0x8804 /* EIGRP System: Remote AS + Remote ID */ #define EIGRP_EXTCOMM_RPM 0x8805 /* EIGRP Remote: Protocol + Metric */ #define EIGRP_EXTCOMM_VRR 0x8806 /* EIGRP Vecmet: Rsvd + (internal) Routerid */ /* * EIGRP Filter constants */ #define EIGRP_FILTER_IN 0 #define EIGRP_FILTER_OUT 1 #define EIGRP_FILTER_MAX 2 /* * EIGRP Filter constants */ #define EIGRP_HSROLE_DEFAULT EIGRP_HSROLE_SPOKE #define EIGRP_HSROLE_HUB 0x01 #define EIGRP_HSROLE_SPOKE 0x02 #endif /* _ZEBRA_EIGRP_CONST_H_ */