From 73df946d56c74384511a194dd01dbe099584fd1a Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 28 Apr 2024 15:14:23 +0200 Subject: Adding upstream version 1.16.10. Signed-off-by: Daniel Baumann --- src/runtime/HACKING.md | 312 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 312 insertions(+) create mode 100644 src/runtime/HACKING.md (limited to 'src/runtime/HACKING.md') diff --git a/src/runtime/HACKING.md b/src/runtime/HACKING.md new file mode 100644 index 0000000..fbf22ee --- /dev/null +++ b/src/runtime/HACKING.md @@ -0,0 +1,312 @@ +This is a living document and at times it will be out of date. It is +intended to articulate how programming in the Go runtime differs from +writing normal Go. It focuses on pervasive concepts rather than +details of particular interfaces. + +Scheduler structures +==================== + +The scheduler manages three types of resources that pervade the +runtime: Gs, Ms, and Ps. It's important to understand these even if +you're not working on the scheduler. + +Gs, Ms, Ps +---------- + +A "G" is simply a goroutine. It's represented by type `g`. When a +goroutine exits, its `g` object is returned to a pool of free `g`s and +can later be reused for some other goroutine. + +An "M" is an OS thread that can be executing user Go code, runtime +code, a system call, or be idle. It's represented by type `m`. There +can be any number of Ms at a time since any number of threads may be +blocked in system calls. + +Finally, a "P" represents the resources required to execute user Go +code, such as scheduler and memory allocator state. It's represented +by type `p`. There are exactly `GOMAXPROCS` Ps. A P can be thought of +like a CPU in the OS scheduler and the contents of the `p` type like +per-CPU state. This is a good place to put state that needs to be +sharded for efficiency, but doesn't need to be per-thread or +per-goroutine. + +The scheduler's job is to match up a G (the code to execute), an M +(where to execute it), and a P (the rights and resources to execute +it). When an M stops executing user Go code, for example by entering a +system call, it returns its P to the idle P pool. In order to resume +executing user Go code, for example on return from a system call, it +must acquire a P from the idle pool. + +All `g`, `m`, and `p` objects are heap allocated, but are never freed, +so their memory remains type stable. As a result, the runtime can +avoid write barriers in the depths of the scheduler. + +User stacks and system stacks +----------------------------- + +Every non-dead G has a *user stack* associated with it, which is what +user Go code executes on. User stacks start small (e.g., 2K) and grow +or shrink dynamically. + +Every M has a *system stack* associated with it (also known as the M's +"g0" stack because it's implemented as a stub G) and, on Unix +platforms, a *signal stack* (also known as the M's "gsignal" stack). +System and signal stacks cannot grow, but are large enough to execute +runtime and cgo code (8K in a pure Go binary; system-allocated in a +cgo binary). + +Runtime code often temporarily switches to the system stack using +`systemstack`, `mcall`, or `asmcgocall` to perform tasks that must not +be preempted, that must not grow the user stack, or that switch user +goroutines. Code running on the system stack is implicitly +non-preemptible and the garbage collector does not scan system stacks. +While running on the system stack, the current user stack is not used +for execution. + +`getg()` and `getg().m.curg` +---------------------------- + +To get the current user `g`, use `getg().m.curg`. + +`getg()` alone returns the current `g`, but when executing on the +system or signal stacks, this will return the current M's "g0" or +"gsignal", respectively. This is usually not what you want. + +To determine if you're running on the user stack or the system stack, +use `getg() == getg().m.curg`. + +Error handling and reporting +============================ + +Errors that can reasonably be recovered from in user code should use +`panic` like usual. However, there are some situations where `panic` +will cause an immediate fatal error, such as when called on the system +stack or when called during `mallocgc`. + +Most errors in the runtime are not recoverable. For these, use +`throw`, which dumps the traceback and immediately terminates the +process. In general, `throw` should be passed a string constant to +avoid allocating in perilous situations. By convention, additional +details are printed before `throw` using `print` or `println` and the +messages are prefixed with "runtime:". + +For runtime error debugging, it's useful to run with +`GOTRACEBACK=system` or `GOTRACEBACK=crash`. + +Synchronization +=============== + +The runtime has multiple synchronization mechanisms. They differ in +semantics and, in particular, in whether they interact with the +goroutine scheduler or the OS scheduler. + +The simplest is `mutex`, which is manipulated using `lock` and +`unlock`. This should be used to protect shared structures for short +periods. Blocking on a `mutex` directly blocks the M, without +interacting with the Go scheduler. This means it is safe to use from +the lowest levels of the runtime, but also prevents any associated G +and P from being rescheduled. `rwmutex` is similar. + +For one-shot notifications, use `note`, which provides `notesleep` and +`notewakeup`. Unlike traditional UNIX `sleep`/`wakeup`, `note`s are +race-free, so `notesleep` returns immediately if the `notewakeup` has +already happened. A `note` can be reset after use with `noteclear`, +which must not race with a sleep or wakeup. Like `mutex`, blocking on +a `note` blocks the M. However, there are different ways to sleep on a +`note`:`notesleep` also prevents rescheduling of any associated G and +P, while `notetsleepg` acts like a blocking system call that allows +the P to be reused to run another G. This is still less efficient than +blocking the G directly since it consumes an M. + +To interact directly with the goroutine scheduler, use `gopark` and +`goready`. `gopark` parks the current goroutine—putting it in the +"waiting" state and removing it from the scheduler's run queue—and +schedules another goroutine on the current M/P. `goready` puts a +parked goroutine back in the "runnable" state and adds it to the run +queue. + +In summary, + + + + + + + +
Blocks
InterfaceGMP
(rw)mutexYYY
noteYYY/N
parkYNN
+ +Atomics +======= + +The runtime uses its own atomics package at `runtime/internal/atomic`. +This corresponds to `sync/atomic`, but functions have different names +for historical reasons and there are a few additional functions needed +by the runtime. + +In general, we think hard about the uses of atomics in the runtime and +try to avoid unnecessary atomic operations. If access to a variable is +sometimes protected by another synchronization mechanism, the +already-protected accesses generally don't need to be atomic. There +are several reasons for this: + +1. Using non-atomic or atomic access where appropriate makes the code + more self-documenting. Atomic access to a variable implies there's + somewhere else that may concurrently access the variable. + +2. Non-atomic access allows for automatic race detection. The runtime + doesn't currently have a race detector, but it may in the future. + Atomic access defeats the race detector, while non-atomic access + allows the race detector to check your assumptions. + +3. Non-atomic access may improve performance. + +Of course, any non-atomic access to a shared variable should be +documented to explain how that access is protected. + +Some common patterns that mix atomic and non-atomic access are: + +* Read-mostly variables where updates are protected by a lock. Within + the locked region, reads do not need to be atomic, but the write + does. Outside the locked region, reads need to be atomic. + +* Reads that only happen during STW, where no writes can happen during + STW, do not need to be atomic. + +That said, the advice from the Go memory model stands: "Don't be +[too] clever." The performance of the runtime matters, but its +robustness matters more. + +Unmanaged memory +================ + +In general, the runtime tries to use regular heap allocation. However, +in some cases the runtime must allocate objects outside of the garbage +collected heap, in *unmanaged memory*. This is necessary if the +objects are part of the memory manager itself or if they must be +allocated in situations where the caller may not have a P. + +There are three mechanisms for allocating unmanaged memory: + +* sysAlloc obtains memory directly from the OS. This comes in whole + multiples of the system page size, but it can be freed with sysFree. + +* persistentalloc combines multiple smaller allocations into a single + sysAlloc to avoid fragmentation. However, there is no way to free + persistentalloced objects (hence the name). + +* fixalloc is a SLAB-style allocator that allocates objects of a fixed + size. fixalloced objects can be freed, but this memory can only be + reused by the same fixalloc pool, so it can only be reused for + objects of the same type. + +In general, types that are allocated using any of these should be +marked `//go:notinheap` (see below). + +Objects that are allocated in unmanaged memory **must not** contain +heap pointers unless the following rules are also obeyed: + +1. Any pointers from unmanaged memory to the heap must be garbage + collection roots. More specifically, any pointer must either be + accessible through a global variable or be added as an explicit + garbage collection root in `runtime.markroot`. + +2. If the memory is reused, the heap pointers must be zero-initialized + before they become visible as GC roots. Otherwise, the GC may + observe stale heap pointers. See "Zero-initialization versus + zeroing". + +Zero-initialization versus zeroing +================================== + +There are two types of zeroing in the runtime, depending on whether +the memory is already initialized to a type-safe state. + +If memory is not in a type-safe state, meaning it potentially contains +"garbage" because it was just allocated and it is being initialized +for first use, then it must be *zero-initialized* using +`memclrNoHeapPointers` or non-pointer writes. This does not perform +write barriers. + +If memory is already in a type-safe state and is simply being set to +the zero value, this must be done using regular writes, `typedmemclr`, +or `memclrHasPointers`. This performs write barriers. + +Runtime-only compiler directives +================================ + +In addition to the "//go:" directives documented in "go doc compile", +the compiler supports additional directives only in the runtime. + +go:systemstack +-------------- + +`go:systemstack` indicates that a function must run on the system +stack. This is checked dynamically by a special function prologue. + +go:nowritebarrier +----------------- + +`go:nowritebarrier` directs the compiler to emit an error if the +following function contains any write barriers. (It *does not* +suppress the generation of write barriers; it is simply an assertion.) + +Usually you want `go:nowritebarrierrec`. `go:nowritebarrier` is +primarily useful in situations where it's "nice" not to have write +barriers, but not required for correctness. + +go:nowritebarrierrec and go:yeswritebarrierrec +---------------------------------------------- + +`go:nowritebarrierrec` directs the compiler to emit an error if the +following function or any function it calls recursively, up to a +`go:yeswritebarrierrec`, contains a write barrier. + +Logically, the compiler floods the call graph starting from each +`go:nowritebarrierrec` function and produces an error if it encounters +a function containing a write barrier. This flood stops at +`go:yeswritebarrierrec` functions. + +`go:nowritebarrierrec` is used in the implementation of the write +barrier to prevent infinite loops. + +Both directives are used in the scheduler. The write barrier requires +an active P (`getg().m.p != nil`) and scheduler code often runs +without an active P. In this case, `go:nowritebarrierrec` is used on +functions that release the P or may run without a P and +`go:yeswritebarrierrec` is used when code re-acquires an active P. +Since these are function-level annotations, code that releases or +acquires a P may need to be split across two functions. + +go:notinheap +------------ + +`go:notinheap` applies to type declarations. It indicates that a type +must never be allocated from the GC'd heap or on the stack. +Specifically, pointers to this type must always fail the +`runtime.inheap` check. The type may be used for global variables, or +for objects in unmanaged memory (e.g., allocated with `sysAlloc`, +`persistentalloc`, `fixalloc`, or from a manually-managed span). +Specifically: + +1. `new(T)`, `make([]T)`, `append([]T, ...)` and implicit heap + allocation of T are disallowed. (Though implicit allocations are + disallowed in the runtime anyway.) + +2. A pointer to a regular type (other than `unsafe.Pointer`) cannot be + converted to a pointer to a `go:notinheap` type, even if they have + the same underlying type. + +3. Any type that contains a `go:notinheap` type is itself + `go:notinheap`. Structs and arrays are `go:notinheap` if their + elements are. Maps and channels of `go:notinheap` types are + disallowed. To keep things explicit, any type declaration where the + type is implicitly `go:notinheap` must be explicitly marked + `go:notinheap` as well. + +4. Write barriers on pointers to `go:notinheap` types can be omitted. + +The last point is the real benefit of `go:notinheap`. The runtime uses +it for low-level internal structures to avoid memory barriers in the +scheduler and the memory allocator where they are illegal or simply +inefficient. This mechanism is reasonably safe and does not compromise +the readability of the runtime. -- cgit v1.2.3