diff options
Diffstat (limited to 'src/runtime/extern.go')
| -rw-r--r-- | src/runtime/extern.go | 287 |
1 files changed, 287 insertions, 0 deletions
diff --git a/src/runtime/extern.go b/src/runtime/extern.go new file mode 100644 index 0000000..15c519d --- /dev/null +++ b/src/runtime/extern.go @@ -0,0 +1,287 @@ +// Copyright 2009 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +/* +Package runtime contains operations that interact with Go's runtime system, +such as functions to control goroutines. It also includes the low-level type information +used by the reflect package; see reflect's documentation for the programmable +interface to the run-time type system. + +# Environment Variables + +The following environment variables ($name or %name%, depending on the host +operating system) control the run-time behavior of Go programs. The meanings +and use may change from release to release. + +The GOGC variable sets the initial garbage collection target percentage. +A collection is triggered when the ratio of freshly allocated data to live data +remaining after the previous collection reaches this percentage. The default +is GOGC=100. Setting GOGC=off disables the garbage collector entirely. +[runtime/debug.SetGCPercent] allows changing this percentage at run time. + +The GOMEMLIMIT variable sets a soft memory limit for the runtime. This memory limit +includes the Go heap and all other memory managed by the runtime, and excludes +external memory sources such as mappings of the binary itself, memory managed in +other languages, and memory held by the operating system on behalf of the Go +program. GOMEMLIMIT is a numeric value in bytes with an optional unit suffix. +The supported suffixes include B, KiB, MiB, GiB, and TiB. These suffixes +represent quantities of bytes as defined by the IEC 80000-13 standard. That is, +they are based on powers of two: KiB means 2^10 bytes, MiB means 2^20 bytes, +and so on. The default setting is math.MaxInt64, which effectively disables the +memory limit. [runtime/debug.SetMemoryLimit] allows changing this limit at run +time. + +The GODEBUG variable controls debugging variables within the runtime. +It is a comma-separated list of name=val pairs setting these named variables: + + allocfreetrace: setting allocfreetrace=1 causes every allocation to be + profiled and a stack trace printed on each object's allocation and free. + + clobberfree: setting clobberfree=1 causes the garbage collector to + clobber the memory content of an object with bad content when it frees + the object. + + cgocheck: setting cgocheck=0 disables all checks for packages + using cgo to incorrectly pass Go pointers to non-Go code. + Setting cgocheck=1 (the default) enables relatively cheap + checks that may miss some errors. Setting cgocheck=2 enables + expensive checks that should not miss any errors, but will + cause your program to run slower. + + efence: setting efence=1 causes the allocator to run in a mode + where each object is allocated on a unique page and addresses are + never recycled. + + gccheckmark: setting gccheckmark=1 enables verification of the + garbage collector's concurrent mark phase by performing a + second mark pass while the world is stopped. If the second + pass finds a reachable object that was not found by concurrent + mark, the garbage collector will panic. + + gcpacertrace: setting gcpacertrace=1 causes the garbage collector to + print information about the internal state of the concurrent pacer. + + gcshrinkstackoff: setting gcshrinkstackoff=1 disables moving goroutines + onto smaller stacks. In this mode, a goroutine's stack can only grow. + + gcstoptheworld: setting gcstoptheworld=1 disables concurrent garbage collection, + making every garbage collection a stop-the-world event. Setting gcstoptheworld=2 + also disables concurrent sweeping after the garbage collection finishes. + + gctrace: setting gctrace=1 causes the garbage collector to emit a single line to standard + error at each collection, summarizing the amount of memory collected and the + length of the pause. The format of this line is subject to change. + Currently, it is: + gc # @#s #%: #+#+# ms clock, #+#/#/#+# ms cpu, #->#-># MB, # MB goal, # P + where the fields are as follows: + gc # the GC number, incremented at each GC + @#s time in seconds since program start + #% percentage of time spent in GC since program start + #+...+# wall-clock/CPU times for the phases of the GC + #->#-># MB heap size at GC start, at GC end, and live heap + # MB goal goal heap size + # MB stacks estimated scannable stack size + # MB globals scannable global size + # P number of processors used + The phases are stop-the-world (STW) sweep termination, concurrent + mark and scan, and STW mark termination. The CPU times + for mark/scan are broken down in to assist time (GC performed in + line with allocation), background GC time, and idle GC time. + If the line ends with "(forced)", this GC was forced by a + runtime.GC() call. + + harddecommit: setting harddecommit=1 causes memory that is returned to the OS to + also have protections removed on it. This is the only mode of operation on Windows, + but is helpful in debugging scavenger-related issues on other platforms. Currently, + only supported on Linux. + + inittrace: setting inittrace=1 causes the runtime to emit a single line to standard + error for each package with init work, summarizing the execution time and memory + allocation. No information is printed for inits executed as part of plugin loading + and for packages without both user defined and compiler generated init work. + The format of this line is subject to change. Currently, it is: + init # @#ms, # ms clock, # bytes, # allocs + where the fields are as follows: + init # the package name + @# ms time in milliseconds when the init started since program start + # clock wall-clock time for package initialization work + # bytes memory allocated on the heap + # allocs number of heap allocations + + madvdontneed: setting madvdontneed=0 will use MADV_FREE + instead of MADV_DONTNEED on Linux when returning memory to the + kernel. This is more efficient, but means RSS numbers will + drop only when the OS is under memory pressure. + + memprofilerate: setting memprofilerate=X will update the value of runtime.MemProfileRate. + When set to 0 memory profiling is disabled. Refer to the description of + MemProfileRate for the default value. + + invalidptr: invalidptr=1 (the default) causes the garbage collector and stack + copier to crash the program if an invalid pointer value (for example, 1) + is found in a pointer-typed location. Setting invalidptr=0 disables this check. + This should only be used as a temporary workaround to diagnose buggy code. + The real fix is to not store integers in pointer-typed locations. + + sbrk: setting sbrk=1 replaces the memory allocator and garbage collector + with a trivial allocator that obtains memory from the operating system and + never reclaims any memory. + + scavtrace: setting scavtrace=1 causes the runtime to emit a single line to standard + error, roughly once per GC cycle, summarizing the amount of work done by the + scavenger as well as the total amount of memory returned to the operating system + and an estimate of physical memory utilization. The format of this line is subject + to change, but currently it is: + scav # KiB work, # KiB total, #% util + where the fields are as follows: + # KiB work the amount of memory returned to the OS since the last line + # KiB total the total amount of memory returned to the OS + #% util the fraction of all unscavenged memory which is in-use + If the line ends with "(forced)", then scavenging was forced by a + debug.FreeOSMemory() call. + + scheddetail: setting schedtrace=X and scheddetail=1 causes the scheduler to emit + detailed multiline info every X milliseconds, describing state of the scheduler, + processors, threads and goroutines. + + schedtrace: setting schedtrace=X causes the scheduler to emit a single line to standard + error every X milliseconds, summarizing the scheduler state. + + tracebackancestors: setting tracebackancestors=N extends tracebacks with the stacks at + which goroutines were created, where N limits the number of ancestor goroutines to + report. This also extends the information returned by runtime.Stack. Ancestor's goroutine + IDs will refer to the ID of the goroutine at the time of creation; it's possible for this + ID to be reused for another goroutine. Setting N to 0 will report no ancestry information. + + asyncpreemptoff: asyncpreemptoff=1 disables signal-based + asynchronous goroutine preemption. This makes some loops + non-preemptible for long periods, which may delay GC and + goroutine scheduling. This is useful for debugging GC issues + because it also disables the conservative stack scanning used + for asynchronously preempted goroutines. + +The net and net/http packages also refer to debugging variables in GODEBUG. +See the documentation for those packages for details. + +The GOMAXPROCS variable limits the number of operating system threads that +can execute user-level Go code simultaneously. There is no limit to the number of threads +that can be blocked in system calls on behalf of Go code; those do not count against +the GOMAXPROCS limit. This package's GOMAXPROCS function queries and changes +the limit. + +The GORACE variable configures the race detector, for programs built using -race. +See https://golang.org/doc/articles/race_detector.html for details. + +The GOTRACEBACK variable controls the amount of output generated when a Go +program fails due to an unrecovered panic or an unexpected runtime condition. +By default, a failure prints a stack trace for the current goroutine, +eliding functions internal to the run-time system, and then exits with exit code 2. +The failure prints stack traces for all goroutines if there is no current goroutine +or the failure is internal to the run-time. +GOTRACEBACK=none omits the goroutine stack traces entirely. +GOTRACEBACK=single (the default) behaves as described above. +GOTRACEBACK=all adds stack traces for all user-created goroutines. +GOTRACEBACK=system is like “all” but adds stack frames for run-time functions +and shows goroutines created internally by the run-time. +GOTRACEBACK=crash is like “system” but crashes in an operating system-specific +manner instead of exiting. For example, on Unix systems, the crash raises +SIGABRT to trigger a core dump. +For historical reasons, the GOTRACEBACK settings 0, 1, and 2 are synonyms for +none, all, and system, respectively. +The runtime/debug package's SetTraceback function allows increasing the +amount of output at run time, but it cannot reduce the amount below that +specified by the environment variable. +See https://golang.org/pkg/runtime/debug/#SetTraceback. + +The GOARCH, GOOS, GOPATH, and GOROOT environment variables complete +the set of Go environment variables. They influence the building of Go programs +(see https://golang.org/cmd/go and https://golang.org/pkg/go/build). +GOARCH, GOOS, and GOROOT are recorded at compile time and made available by +constants or functions in this package, but they do not influence the execution +of the run-time system. +*/ +package runtime + +import ( + "internal/goarch" + "internal/goos" +) + +// Caller reports file and line number information about function invocations on +// the calling goroutine's stack. The argument skip is the number of stack frames +// to ascend, with 0 identifying the caller of Caller. (For historical reasons the +// meaning of skip differs between Caller and Callers.) The return values report the +// program counter, file name, and line number within the file of the corresponding +// call. The boolean ok is false if it was not possible to recover the information. +func Caller(skip int) (pc uintptr, file string, line int, ok bool) { + rpc := make([]uintptr, 1) + n := callers(skip+1, rpc[:]) + if n < 1 { + return + } + frame, _ := CallersFrames(rpc).Next() + return frame.PC, frame.File, frame.Line, frame.PC != 0 +} + +// Callers fills the slice pc with the return program counters of function invocations +// on the calling goroutine's stack. The argument skip is the number of stack frames +// to skip before recording in pc, with 0 identifying the frame for Callers itself and +// 1 identifying the caller of Callers. +// It returns the number of entries written to pc. +// +// To translate these PCs into symbolic information such as function +// names and line numbers, use CallersFrames. CallersFrames accounts +// for inlined functions and adjusts the return program counters into +// call program counters. Iterating over the returned slice of PCs +// directly is discouraged, as is using FuncForPC on any of the +// returned PCs, since these cannot account for inlining or return +// program counter adjustment. +func Callers(skip int, pc []uintptr) int { + // runtime.callers uses pc.array==nil as a signal + // to print a stack trace. Pick off 0-length pc here + // so that we don't let a nil pc slice get to it. + if len(pc) == 0 { + return 0 + } + return callers(skip, pc) +} + +var defaultGOROOT string // set by cmd/link + +// GOROOT returns the root of the Go tree. It uses the +// GOROOT environment variable, if set at process start, +// or else the root used during the Go build. +func GOROOT() string { + s := gogetenv("GOROOT") + if s != "" { + return s + } + return defaultGOROOT +} + +// buildVersion is the Go tree's version string at build time. +// +// If any GOEXPERIMENTs are set to non-default values, it will include +// "X:<GOEXPERIMENT>". +// +// This is set by the linker. +// +// This is accessed by "go version <binary>". +var buildVersion string + +// Version returns the Go tree's version string. +// It is either the commit hash and date at the time of the build or, +// when possible, a release tag like "go1.3". +func Version() string { + return buildVersion +} + +// GOOS is the running program's operating system target: +// one of darwin, freebsd, linux, and so on. +// To view possible combinations of GOOS and GOARCH, run "go tool dist list". +const GOOS string = goos.GOOS + +// GOARCH is the running program's architecture target: +// one of 386, amd64, arm, s390x, and so on. +const GOARCH string = goarch.GOARCH |