diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-28 09:35:11 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-28 09:35:11 +0000 |
commit | da76459dc21b5af2449af2d36eb95226cb186ce2 (patch) | |
tree | 542ebb3c1e796fac2742495b8437331727bbbfa0 /doc/internals/api/htx-api.txt | |
parent | Initial commit. (diff) | |
download | haproxy-upstream.tar.xz haproxy-upstream.zip |
Adding upstream version 2.6.12.upstream/2.6.12upstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to '')
-rw-r--r-- | doc/internals/api/htx-api.txt | 570 |
1 files changed, 570 insertions, 0 deletions
diff --git a/doc/internals/api/htx-api.txt b/doc/internals/api/htx-api.txt new file mode 100644 index 0000000..971328b --- /dev/null +++ b/doc/internals/api/htx-api.txt @@ -0,0 +1,570 @@ + ----------------------------------------------- + HTX API + Version 1.1 + ( Last update: 2021-02-24 ) + ----------------------------------------------- + Author : Christopher Faulet + Contact : cfaulet at haproxy dot com + +1. Background + +Historically, HAProxy stored HTTP messages in a raw fashion in buffers, keeping +parsing information separately in a "struct http_msg" owned by the stream. It was +optimized to the data transfer, but not so much for rewrites. It was also HTTP/1 +centered. While it was the only HTTP version supported, it was not a +problem. But with the rise of HTTP/2, it starts to be hard to still use this +representation. + +At the first age of the HTTP/2 in HAProxy, H2 messages were converted into +H1. This was terribly unefficient because it required two parsing passes, a +first one in H2 and a second one in H1, with a conversion in the middle. And of +course, the same was also true in the opposite direction. outgoing H1 messages +had to be converted back in H2 to be sent. Even worse, because the H2->H1 +conversion, only client H2 connections were supported. + +So, to address all these problems, we decided to replace the old raw +representation by a version-agnostic and self-structured internal HTTP +representation, the HTX. As an additional benefit, with this new representation, +the message parsing and its processing are now separated, making all the HTTP +analysis simpler and cleaner. The parsing of HTTP messages is now handled by +the multiplexers (h1 or h2). + + +2. The HTX message + +The HTX is a structure containing useful information about an HTTP message +followed by a contiguous array with some parts of the message. These parts are +called blocks. A block is composed of metadata (htx_blk) and an associated +payload. Blocks' metadata are stored starting from the end of the array while +their payload are stored at the beginning. Blocks' metadata are often simply +called blocks. it is a misuse of language that's simplify explanations. + +Internally, this structure is "hidden" in a buffer. This way, there are few +changes into intermediate layers (stream-interface and channels). They still +manipulate buffers. Only the multiplexer and the stream have to know how data +are really stored. From the HTX perspective, a buffer is just a memory +area. When an HTX message is stored in a buffer, this one appears as full. + + * General view of an HTX message : + + + buffer->area + | + |<------------ buffer->size == buffer->data ----------------------| + | | + | |<------------- Blocks array (htx->size) ------------------>| + V | | + +-----+-----------------+-------------------------+---------------+ + | HTX | PAYLOADS ==> | | <== HTX_BLKs | + +-----+-----------------+-------------------------+---------------+ + | | | | + |<-payloads part->|<----- free space ------>|<-blocks part->| + (htx->data) + + +The blocks part remains linear and sorted. It may be see as an array with +negative indexes. But, instead of using negative indexes, we use positive +positions to identify a block. This position is then converted to an address +relatively to the beginning of the blocks array. + + tail head + | | + V V + .....--+----+-----------------------+------+------+ + | Bn | ... | B1 | B0 | + .....--+----+-----------------------+------+------+ + ^ ^ ^ + Addr of the block Addr of the block Addr of the block + at the position N at the position 1 at the position 0 + + +In the HTX structure, 3 "special" positions are stored : + + - tail : Position of the newest inserted block + - head : Position of the oldest inserted block + - first : Position of the first block to (re)start the analyse + +The blocks part never wrap. If we have no space to allocate a new block and if +there is a hole at the beginning of the blocks part (so at the end of the blocks +array), we move back all blocks. + + + tail head tail head + | | | | + V V V V + ...+--------------+---------+ blocks ...----------+--------------+ + | X== HTX_BLKS | | defrag | <== HTX_BLKS | + ...+--------------+---------+ =====> ...----------+--------------+ + + +The payloads part is a raw space that may wrap. A block's payload must never be +accessed directly. Instead a block must be selected to retrieve the address of +its payload. + + + +------------------------( B0.addr )--------------------------+ + | +-------------------( B1.addr )----------------------+ | + | | +-----------( B2.addr )----------------+ | | + V V V | | | + +-----+----+-------+----+--------+-------------+-------+----+----+----+ + | HTX | P0 | P1 | P2 | ...==> | | <=... | B2 | B1 | B0 | + +-----+----+-------+----+--------+-------------+-------+----+----+----+ + + +Because the payloads part may wrap, there are 2 usable free spaces : + + - The free space in front of the blocks part. This one is used if and only if + the other one was not used yet. + + - The free space at the beginning of the message. Once this one is used, the + other one is never used again, until a message defragmentation. + + + * Linear payloads part : + + + head_addr end_addr tail_addr + | | | + V V V + +-----+--------------------+-------------+--------------------+-------... + | HTX | | PAYLOADS | | HTX_BLKs + +-----+--------------------+-------------+--------------------+-------... + |<-- free space 2 -->| |<-- free space 1 -->| + (used if the other is too small) (used in priority) + + + * Wrapping payloads part : + + + head_addr end_addr tail_addr + | | | + V V V + +-----+----+----------------+--------+----------------+-------+-------... + | HTX | | PAYLOADS part2 | | PAYLOADS part1 | | HTX_BLKs + +-----+----+----------------+--------+----------------+-------+-------... + |<-->| |<------>| |<----->| + unusable free space unusable + free space free space + + +Finally, when the usable free space is not enough to store a new block, unusable +parts may be get back with a full defragmentation. The payloads part is then +realigned at the beginning of the blocks array and the free space becomes +continuous again. + + +3. The HTX blocks + +An HTX block can be as well a start-line as a header, a body part or a +trailer. For all these types of block, a payload is attached to the block. It +can also be a marker, the end-of-headers or end-of-trailers. For these blocks, +there is no payload but it counts for a byte. It is important to not skip it +when data are forwarded. + +As already said, a block is composed of metadata and a payload. Metadata are +stored in the blocks part and are composed of 2 fields : + + - info : It a 32 bits field containing the block's type on 4 bits followed + by the payload length. See below for details. + + - addr : The payload's address, if any, relatively to the beginning the + array used to store part of the HTTP message itself. + + + * Block's info representation : + + 0b 0000 0000 0000 0000 0000 0000 0000 0000 + ---- ------------------------ --------- + type value (1 MB max) name length (header/trailer - 256B max) + ---------------------------------- + data length (256 MB max) + (body, method, path, version, status, reason) + + +Supported types are : + + - 0000 (0) : The request start-line + - 0001 (1) : The response start-line + - 0010 (2) : A header block + - 0011 (3) : The end-of-headers marker + - 0100 (4) : A data block + - 0101 (5) : A trailer block + - 0110 (6) : The end-of-trailers marker + - 1111 (15) : An unused block + +Other types are unused for now and reserved for futur extensions. + +An HTX message is typically composed of following blocks, in this order : + + - a start-line + - zero or more header blocks + - an end-of-headers marker + - zero or more data blocks + - zero or more trailer blocks (optional) + - an end-of-trailers marker (optional but always set if there is at least + one trailer block) + +Only one HTTP request at a time can be stored in an HTX message. For HTTP +response, it is more complicated. Only one "final" response can be stored in an +HTX message. It is a response with status-code 101 or greater or equal to +200. But it may be preceded by several 1xx informational responses. Such +responses are part of the same HTX message. + +When the end of the message is reached a special flag is set on the message +(HTX_FL_EOM). It means no more data are expected for this message, except +tunneled data. But tunneled data will never be mixed with message data to avoid +ambiguities. Thus once the flag marking the end of the message is set, it is +easy to know the message ends. The end is reached if the HTX message is empty or +on the tail HTX block in the HTX message. Once all blocks of the HTX message are +consumed, tunneled data, if any, may be transferred. + + +3.1. The start-line + +Every HTX message starts with a start-line. Its payload is a "struct htx_sl". In +addition to the parts of the HTTP start-line, this structure contains some +information about the represented HTTP message, mainly in the form of flags +(HTX_SL_F_*). For instance, if an HTTP message contains the header +"conten-length", then the flag HTX_SL_F_CLEN is set. + +Each HTTP message has its own start-line. So an HTX request has one and only one +start-line because it must contain only one HTTP request at a time. But an HTX +response may have more than one start-line if the final HTTP response is +precedeed by some 1xx informational responses. + +In HTTP/2, there is no start-line. So the H2 multiplexer must create one when it +converts an H2 message to HTX : + + - For the request, it uses the pseudo headers ":method", ":path" or + ":authority" depending on the method and the hardcoded version "HTTP/2.0". + + - For the response, it used the hardcoded version "HTTP/2.0", the + pseudo-header ":status" and an empty reason. + + +3.2. The headers and trailers + +HTX Headers and trailers are quite similar. Different types are used to simplify +headers processing. But from the HTX point of view, there is no real difference, +except their position in the HTX message. The header blocks always follow an HTX +start-line while trailer blocks come after the data. If there is no data, they +follow the end-of-headers marker. + +Headers and trailers are the only blocks containing a Key/Value payload. The +corresponding end-of marker must always be placed after each group to mark, as +it name suggests, the end. + +In HTTP/1, trailers are only present on chunked messages. But chunked messages +do not always have trailers. In this case, the end-of-trailers block may or may +not be present. Multiplexers must be able to handle both situations. In HTTP/2, +trailers are only present if a HEADERS frame is sent after DATA frames. + + +3.3. The data + +The payload body of an HTTP message is stored as DATA blocks in the HTX +message. For HTTP/1 messages, it is the message body without the chunks +formatting, if any. For HTTP/2, it is the payload of DATA frames. + +The DATA blocks are the only HTX blocks that may be partially processed (copied +or removed). All other types of block must be entierly processed. This means +DATA blocks can be resized. + + +3.4. The end-of markers + +These blocks are used to delimit parts of an HTX message. It exists two +markers : + + - end-of-headers (EOH) + - end-of-trailers (EOT) + +EOH is always present in an HTX message. EOT is optional. + + +4. The HTX API + + +4.1. Get/set HTX message from/to the underlying buffer + +The first thing to do to process an HTX message is to get it from the underlying +buffer. There are 2 functions to do so, the second one relying on the first : + + - htxbuf() returns an HTX message from a buffer. It does not modify the + buffer. It only initialize the HTX message if the buffer is empty. + + - htx_from_buf() uses htxbuf(). But it also updates the underlying buffer so + that it appears as full. + +Both functions return a "zero-sized" HTX message if the buffer is null. This +way, the HTX message is always valid. The first function is the default function +to use. The second one is only useful when some content will be added. For +instance, it used by the HTX analyzers when HAProxy generates a response. Thus, +the buffer is in a right state. + +Once the processing done, if the HTX message has been modified, the underlying +buffer must be also updated, except htx_from_buf() was used _AND_ data was only +added. For all other cases, the function htx_to_buf() must be called. + +Finally, the function htx_reset() may be called at any time to reset an HTX +message. And the function buf_room_for_htx_data() may be called to know if a raw +buffer is full from the HTX perspective. It is used during conversion from/to +the HTX. + + +4.2. Helpers to deal with free space in an HTX message + +Once with an HTX message, following functions may help to process it : + + - htx_used_space() and htx_meta_space() return, respectively, the total + space used in an HTX message and the space used by block's metadata only. + + - htx_free_space() and htx_free_data_space() return, respectively, the total + free space in an HTX message and the free space available for the payload + if a new HTX block is stored (so it is the total free space minus the size + of an HTX block). + + - htx_is_empty() and htx_is_not_empty() are boolean functions to know if an + HTX message is empty or not. + + - htx_get_max_blksz() returns the maximum size available for the payload, + not exceeding a maximum, metadata included. + + - htx_almost_full() should be used to know if an HTX message uses at least + 3/4 of its capacity. + + +4.3. HTX Blocks manipulations + +Once the available sapce in an HTX message is known, the next step is to add HTX +blocks. First of all the function htx_nbblks() returns the number of blocks +allocated in an HTX message. Then, there is an add function per block's type : + + - htx_add_stline() adds a start-line. The type (request or response) and the + flags of the start-line must be provided, as well as its three parts + (method,uri,version or version,status-code,reason). + + - htx_add_header() and htx_add_trailers() are similar. The name and the + value must be provided. The inserted HTX block is returned on success or + NULL if an error occurred. + + - htx_add_endof() must be used to add any end-of marker. The block's type + (EOH or EOT) must be specified. The inserted HTX block is returned on + success or NULL if an error occurred. + + - htx_add_all_headers() and htx_add_all_trailers() add, respectively, a list + of headers and a list of trailers, followed by the appropriate end-of + marker. On success, this marker is returned. Otherwise, NULL is + returned. Note there is no rollback on the HTX message when an error + occurred. Some headers or trailers may have been added. So it is the + caller responsibility to take care of that. + + - htx_add_data() must be used to add a DATA block. Unlike previous + functions, this one returns the number of bytes copied or 0 if nothing was + copied. If possible, the data are appended to the tail block if it is a + DATA block. Only a part of the payload may be copied because this function + will try to limit the message defragmentation and the wrapping of blocks + as far as possible. + + - htx_add_data_atonce() must be used if all data must be added or nothing. + It tries to insert all the payload, this function returns the inserted + block on success. Otherwise it returns NULL. + +When an HTX block is added, it is always the last one (the tail). But, if a +block must be added at a specific place, it is not really handy. 2 functions may +help (others could be added) : + + - htx_add_last_data() adds a DATA block just after all other DATA blocks and + before any trailers and EOT marker. It relies on htx_add_data_atonce(), so + a defragmentation may be performed. + + - htx_move_blk_before() moves a specific block just after another one. Both + blocks must already be in the HTX message and the block to move must + always be placed after the "pivot". + +Once added, there are three functions to update the block's payload : + + - htx_replace_stline() updates a start-line. The HTX block must be passed as + argument. Only string parts of the start-line are updated by this + function. On success, it returns the new start-line. So it is pretty easy + to update its flags. NULL is returned if an error occurred. + + - htx_replace_header() fully replaces a header (its name and its value) by a + new one. The HTX block must be passed a argument, as well as its new name + and its new value. The new header can be smaller or larger than the old + one. This function returns the new HTX block on success, or NULL is an + error occurred. + + - htx_replace_blk_value() replaces a part of a block's payload or its + totality. It works for HEADERS, TRAILERS or DATA blocks. The HTX block + must be provided with the part to remove and the new one. The new part can + be smaller or larger than the old one. This function returns the new HTX + block on success, or NULL is an error occurred. + + - htx_change_blk_value_len() changes the size of the value. It is the caller + responsibility to change the value itself, make sure there is enough space + and update allocated value. This function updates the HTX message + accordingly. + + - htx_set_blk_value_len() changes the size of the value. It is the caller + responsibility to change the value itself, make sure there is enough space + and update allocated value. Unlike the function + htx_change_blk_value_len(), this one does not update the HTX message. So + it should be used with caution. + + - htx_cut_data_blk() removes <n> bytes from the beginning of a DATA + block. The block's start address and its length are adjusted, and the + htx's total data count is updated. This is used to mark that part of some + data were transferred from a DATA block without removing this DATA + block. No sanity check is performed, the caller is responsible for doing + this exclusively on DATA blocks, and never removing more than the block's + size. + + - htx_remove_blk() removes a block from an HTX message. It returns the + following block or NULL if it is the tail block. + +Finally, a block may be removed using the function htx_remove_blk(). This +function returns the block following the one removed or NULL if it is the tail +block. + + +4.4. The HTX start-line + +Unlike other HTX blocks, the start-line is a bit special because its payload is +a structure followed by its three parts : + + +--------+-------+-------+-------+ + | HTX_SL | PART1 | PART2 | PART3 | + +--------+-------+-------+-------+ + +Some macros and functions may help to manipulate these parts : + + - HTX_SL_P{N}_LEN() and HTX_SL_P{N}_PTR() are macros to get the length of a + part and a pointer on it. {N} should be 1, 2 or 3. + + - HTX_SL_REQ_MLEN(), HTX_SL_REQ_ULEN(), HTX_SL_REQ_VLEN(), + HTX_SL_REQ_MPTR(), HTX_SL_REQ_UPTR() and HTX_SL_REQ_VPTR() are macros to + get info about a request start-line. These macros only wrap HTX_SL_P* + ones. + + - HTX_SL_RES_VLEN(), HTX_SL_RES_CLEN(), HTX_SL_RES_RLEN(), + HTX_SL_RES_VPTR(), HTX_SL_RES_CPTR() and HTX_SL_RES_RPTR() are macros to + get info about a response start-line. These macros only wrap HTX_SL_P* + ones. + + - htx_sl_p1(), htx_sl_p2() and htx_sl_p2() are functions to get the ist + corresponding to the right part of a start-line. + + - htx_sl_req_meth(), htx_sl_req_uri() and htx_sl_req_vsn() get the ist + corresponding to the right part of a request start-line. + + - htx_sl_res_vsn(), htx_sl_res_code() and htx_sl_res_reason() get the ist + corresponding to the right part of a response start-line. + + +4.5. Iterate on the HTX message + +To iterate on an HTX message, the first thing to do is to get the HTX block to +start the loop. There are three special blocks in an HTX message that may be +good candidates to start a loop : + + - the head block. It is the oldest inserted block. Multiplexers always start + to consume an HTX message from this block. The function htx_get_head() + returns its position and htx_get_head_blk() returns the blocks itself. In + addition, the function htx_get_head_type() returns its block's type. + + - the tail block. It is the newest inserted block. The function + htx_get_tail() returns its position and htx_get_tail_blk() returns the + blocks itself. In addition, the function htx_get_tail_type() returns its + block's type. + + - the first block. It is the block where to (re)start the analyse. It is + used as start point by HTX analyzers. The function htx_get_first() returns + its position and htx_get_first_blk() returns the blocks itself. In + addition, the function htx_get_first_type() returns its block's type. + +For all these functions, if the HTX message is empty, -1 is returned for the +block's position, NULL instead of a block and HTX_BLK_UNUSED for its type. + +Then to iterate on blocks, foreword or backward : + + - htx_get_prev() and htx_get_next() return, respectively, the position of + the previous block or the next block, given a specific position. Or -1 if + an edge is reached. + + - htx_get_prev_blk() and htx_get_next_blk() return, respectively, the + previous block or the next one, given a specific block. Or NULL if an edge + is reached. + +4.6. Access block content and info + +Following functions may be used to retrieve information about a specific HTX +block : + + - htx_get_blk_pos() returns the position of a block. It must be in the HTX + message. + + - htx_get_blk_ptr() returns a pointer on the payload of a block. + + - htx_get_blk_type() returns the type of a block. + + - htx_get_blksz() returns the payload size of a block + + - htx_get_blk_name() returns the name of a block, only if it is a header or + a trailer. Otherwise, it returns an empty string. + + - htx_get_blk_value() returns the value of a block, depending on its + type. For header and trailer blocks, it is the value field. For markers + (EOH or EOT), an empty string is returned. For other blocks an ist + pointing on the block payload is returned. + + - htx_is_unique_blk() may be used to know if a block is the only one + remaining inside an HTX message, excluding unused blocks. This function is + pretty useful to determine the end of a HTX message, in conjunction with + HTX_FL_EOM flag. + +4.7. Advanced functions + +Some more advanced functions may be used to do complex processing on the HTX +message. These functions are used by HTX analyzers or by multiplexers. + + - htx_truncate() removes all blocks after the one containing a specific + offset relatively to the head block of the HTX message. If the offset is + inside a DATA block, it is truncated. For all other blocks, the removal + starts to the next block. + + - htx_drain() tries to remove a specific amount of bytes of payload. If the + tail block is a DATA block, it may be truncated if necessary. All other + block are removed at once or kept. This function returns a mixed value, + with the first block not removed, or NULL if everything was removed, and + the amount of data drained. + + - htx_xfer_blks() transfers HTX blocks from an HTX message to another, + stopping on the first block of a specified type or when a specific amount + of bytes, including meta-data, was moved. If the tail block is a DATA + block, it may be partially moved. All other block are transferred at once + or kept. This function returns a mixed value, with the last block moved, + or NULL if nothing was moved, and the amount of data transferred. When + HEADERS or TRAILERS blocks must be transferred, this function transfers + all of them. Otherwise, if it is not possible, it triggers an error. It is + the caller responsibility to transfer all headers or trailers at once. + + - htx_append_msg() append an HTX message to another one. All the message is + copied or nothing. So, if an error occurred, a rollback is performed. This + function returns 1 on success and 0 on error. + + - htx_reserve_max_data() Reserves the maximum possible size for an HTX data + block, by extending an existing one or by creating a new one. It returns a + compound result with the HTX block and the position where new data must be + inserted (0 for a new block). If an error occurs or if there is no space + left, NULL is returned instead of a pointer on an HTX block. + + - htx_find_offset() looks for the HTX block containing a specific offset, + starting at the HTX message's head. The function returns the found HTX + block and the position inside this block where the offset is. If the + offset is outside of the HTX message, NULL is returned. + + - htx_defrag() defragments an HTX message. It removes unused blocks and + unwraps the payloads part. A temporary buffer is used to do so. This + function never fails. A referenced block may be provided. If so, the + corresponding new block is returned. Otherwise, NULL is returned. |