diff options
Diffstat (limited to 'Makefile')
| -rw-r--r-- | Makefile | 1208 |
1 files changed, 1208 insertions, 0 deletions
diff --git a/Makefile b/Makefile new file mode 100644 index 0000000..31b6008 --- /dev/null +++ b/Makefile @@ -0,0 +1,1208 @@ +# This GNU Makefile supports different OS and CPU combinations. +# +# You should use it this way : +# [g]make TARGET=os [ARCH=arch] [CPU=cpu] USE_xxx=1 ... +# +# When in doubt, invoke help, possibly with a known target : +# [g]make help +# [g]make help TARGET=linux-glibc +# +# By default the detailed commands are hidden for a cleaner output, but you may +# see them by appending "V=1" to the make command. +# +# Valid USE_* options are enumerated in the "use_opts" variable and are listed +# below. Most of them are automatically set by the TARGET, others have to be +# explicitly specified : +# USE_EPOLL : enable epoll() on Linux 2.6. Automatic. +# USE_KQUEUE : enable kqueue() on BSD. Automatic. +# USE_EVPORTS : enable event ports on SunOS systems. Automatic. +# USE_NETFILTER : enable netfilter on Linux. Automatic. +# USE_PCRE : enable use of libpcre for regex. Recommended. +# USE_PCRE_JIT : enable JIT for faster regex on libpcre >= 8.32 +# USE_PCRE2 : enable use of libpcre2 for regex. +# USE_PCRE2_JIT : enable JIT for faster regex on libpcre2 +# USE_POLL : enable poll(). Automatic. +# USE_THREAD : enable threads support. +# USE_STATIC_PCRE : enable static libpcre. Recommended. +# USE_STATIC_PCRE2 : enable static libpcre2. +# USE_TPROXY : enable transparent proxy. Automatic. +# USE_LINUX_TPROXY : enable full transparent proxy. Automatic. +# USE_LINUX_SPLICE : enable kernel 2.6 splicing. Automatic. +# USE_LIBCRYPT : enable encrypted passwords using -lcrypt +# USE_CRYPT_H : set it if your system requires including crypt.h +# USE_GETADDRINFO : use getaddrinfo() to resolve IPv6 host names. +# USE_OPENSSL : enable use of OpenSSL. Recommended, but see below. +# USE_ENGINE : enable use of OpenSSL Engine. +# USE_LUA : enable Lua support. +# USE_ACCEPT4 : enable use of accept4() on linux. Automatic. +# USE_CLOSEFROM : enable use of closefrom() on *bsd, solaris. Automatic. +# USE_PRCTL : enable use of prctl(). Automatic. +# USE_PROCCTL : enable use of procctl(). Automatic. +# USE_ZLIB : enable zlib library support and disable SLZ +# USE_SLZ : enable slz library instead of zlib (default=enabled) +# USE_CPU_AFFINITY : enable pinning processes to CPU on Linux. Automatic. +# USE_TFO : enable TCP fast open. Supported on Linux >= 3.7. +# USE_NS : enable network namespace support. Supported on Linux >= 2.6.24. +# USE_DL : enable it if your system requires -ldl. Automatic on Linux. +# USE_RT : enable it if your system requires -lrt. Automatic on Linux. +# USE_BACKTRACE : enable backtrace(). Automatic on Linux. +# USE_PROMEX : enable the Prometheus exporter +# USE_DEVICEATLAS : enable DeviceAtlas api. +# USE_51DEGREES : enable third party device detection library from 51Degrees +# USE_WURFL : enable WURFL detection library from Scientiamobile +# USE_SYSTEMD : enable sd_notify() support. +# USE_OBSOLETE_LINKER : use when the linker fails to emit __start_init/__stop_init +# USE_THREAD_DUMP : use the more advanced thread state dump system. Automatic. +# USE_OT : enable the OpenTracing filter +# USE_MEMORY_PROFILING : enable the memory profiler. Linux-glibc only. +# USE_LIBATOMIC : force to link with/without libatomic. Automatic. +# +# Options can be forced by specifying "USE_xxx=1" or can be disabled by using +# "USE_xxx=" (empty string). The list of enabled and disabled options for a +# given TARGET is enumerated at the end of "make help". +# +# Variables useful for packagers : +# CC is set to "cc" by default and is used for compilation only. +# LD is set to "cc" by default and is used for linking only. +# ARCH may be useful to force build of 32-bit binary on 64-bit systems +# CFLAGS is automatically set for the specified CPU and may be overridden. +# LDFLAGS is automatically set to -g and may be overridden. +# DEP may be cleared to ignore changes to include files during development +# SMALL_OPTS may be used to specify some options to shrink memory usage. +# DEBUG may be used to set some internal debugging options. +# ERR may be set to non-empty to pass -Werror to the compiler +# ADDINC may be used to complete the include path in the form -Ipath. +# ADDLIB may be used to complete the library list in the form -Lpath -llib. +# DEFINE may be used to specify any additional define, which will be reported +# by "haproxy -vv" in CFLAGS. +# SILENT_DEFINE may be used to specify other defines which will not be +# reported by "haproxy -vv". +# EXTRA is used to force building or not building some extra tools. +# DESTDIR is not set by default and is used for installation only. +# It might be useful to set DESTDIR if you want to install haproxy +# in a sandbox. +# INSTALL is set to "install" by default and is used to provide the name of +# the install binary used by the install targets and any additional +# flags. +# PREFIX is set to "/usr/local" by default and is used for installation only. +# SBINDIR is set to "$(PREFIX)/sbin" by default and is used for installation +# only. +# MANDIR is set to "$(PREFIX)/share/man" by default and is used for +# installation only. +# DOCDIR is set to "$(PREFIX)/doc/haproxy" by default and is used for +# installation only. +# HLUA_PREPEND_PATH may be used to prepend a folder to Lua's default package.path. +# HLUA_PREPEND_CPATH may be used to prepend a folder to Lua's default package.cpath. +# +# Other variables : +# PCRE_CONFIG : force the binary path to get pcre config (by default +# pcre-config) +# PCREDIR : force the path to libpcre. +# PCRE_LIB : force the lib path to libpcre (defaults to $PCREDIR/lib). +# PCRE_INC : force the include path to libpcre ($PCREDIR/inc) +# PCRE2_CONFIG : force the binary path to get pcre2 config (by default +# pcre2-config) +# SSL_LIB : force the lib path to libssl/libcrypto +# SSL_INC : force the include path to libssl/libcrypto +# LUA_LIB : force the lib path to lua +# LUA_INC : force the include path to lua +# LUA_LIB_NAME : force the lib name (or automatically evaluated, by order of +# priority : lua5.4, lua54, lua5.3, lua53, lua). +# OT_DEBUG : compile the OpenTracing filter in debug mode +# OT_INC : force the include path to libopentracing-c-wrapper +# OT_LIB : force the lib path to libopentracing-c-wrapper +# OT_RUNPATH : add RUNPATH for libopentracing-c-wrapper to haproxy executable +# OT_USE_VARS : allows the use of variables for the OpenTracing context +# IGNOREGIT : ignore GIT commit versions if set. +# VERSION : force haproxy version reporting. +# SUBVERS : add a sub-version (eg: platform, model, ...). +# EXTRAVERSION : local version string to append (e.g. build number etc) +# VERDATE : force haproxy's release date. +# VTEST_PROGRAM : location of the vtest program to run reg-tests. +# DEBUG_USE_ABORT: use abort() for program termination, see include/haproxy/bug.h for details + +# verbosity: pass V=1 for verbose shell invocation +V = 0 +Q = @ +ifeq ($V,1) +Q= +endif + +# WARNING: Do not change cc-opt, cc-opt-alt or cc-warning without checking if +# clang bug #49364 is fixed. stderr is redirected to /dev/null on +# purpose, to work around a clang 11 bug that crashes if stderr is +# redirected to stdin. +# +# Function used to detect support of a given option by the compiler. +# Usage: CFLAGS += $(call cc-opt,option). Eg: $(call cc-opt,-fwrapv) +# Note: ensure the referencing variable is assigned using ":=" and not "=" to +# call it only once. +cc-opt = $(shell set -e; if $(CC) -Werror $(1) -E -xc - -o /dev/null </dev/null >&0 2>/dev/null; then echo "$(1)"; fi;) + +# same but tries with $2 if $1 is not supported +cc-opt-alt = $(if $(shell set -e; if $(CC) -Werror $(1) -E -xc - -o /dev/null </dev/null >&0 2>/dev/null; then echo 1;fi),$(1),$(call cc-opt,$(2))) + +# validate a list of options one at a time +cc-all-opts = $(foreach a,$(1),$(call cc-opt,$(a))) + +# try to pass plenty of options at once, take them on success or try them +# one at a time on failure and keep successful ones. This is handy to quickly +# validate most common options. +cc-all-fast = $(if $(call cc-opt,$(1)),$(1),$(call cc-all-opts,$(1))) + +# Below we verify that the compiler supports any -Wno-something option to +# disable any warning, or if a special option is needed to achieve that. This +# will allow to get rid of testing when the compiler doesn't care. The result +# is made of two variables: +# - cc-anywno that's non-empty if the compiler supports disabling anything +# - cc-wnouwo that may contain an option needed to enable this behavior +# Gcc 4.x and above do not need any option but will still complain about unknown +# options if another warning or error happens, and as such they're not testable. +# Clang needs a special option -Wno-unknown-warning-option. Compilers not +# supporting this option will check all warnings individually. +cc-anywno := $(call cc-opt,-Wno-haproxy-warning) +cc-wnouwo := $(if $(cc-anywno),,$(call cc-opt,-Wno-unknown-warning-option)) +cc-anywno := $(if $(cc-anywno)$(cc-wnouwo),1) + +# Disable a warning when supported by the compiler. Don't put spaces around the +# warning! And don't use cc-opt which doesn't always report an error until +# another one is also returned. If "cc-anywno" is set, the compiler supports +# -Wno- followed by anything so we don't even need to start the compiler. +# Usage: CFLAGS += $(call cc-nowarn,warning). Eg: $(call cc-opt,format-truncation) +cc-nowarn = $(if $(cc-anywno),-Wno-$(1),$(shell set -e; if $(CC) -Werror -W$(1) -E -xc - -o /dev/null </dev/null >&0 2>/dev/null; then echo "-Wno-$(1)"; fi;)) + +#### Installation options. +DESTDIR = +INSTALL = install +PREFIX = /usr/local +SBINDIR = $(PREFIX)/sbin +MANDIR = $(PREFIX)/share/man +DOCDIR = $(PREFIX)/doc/haproxy + +#### TARGET system +# Use TARGET=<target_name> to optimize for a specific target OS among the +# following list (use the default "generic" if uncertain) : +# linux-glibc, linux-glibc-legacy, linux-musl, solaris, freebsd, freebsd-glibc, +# dragonfly, openbsd, netbsd, cygwin, haiku, aix51, aix52, aix72-gcc, osx, generic, +# custom +TARGET = + +#### TARGET CPU +# Use CPU=<cpu_name> to optimize for a particular CPU, among the following +# list : +# generic, native, i586, i686, ultrasparc, power8, power9, custom, +# a53, a72, armv81, armv8-auto +CPU = generic + +#### Architecture, used when not building for native architecture +# Use ARCH=<arch_name> to force build for a specific architecture. Known +# architectures will lead to "-m32" or "-m64" being added to CFLAGS and +# LDFLAGS. This can be required to build 32-bit binaries on 64-bit targets. +# Currently, only 32, 64, x86_64, i386, i486, i586 and i686 are understood. +ARCH = + +#### Toolchain options. +CC = cc +LD = $(CC) + +#### Debug flags (typically "-g"). +# Those flags only feed CFLAGS so it is not mandatory to use this form. +DEBUG_CFLAGS = -g + +#### Add -Werror when set to non-empty +ERR = + +#### May be used to force running a specific set of reg-tests +REG_TEST_FILES = +REG_TEST_SCRIPT=./scripts/run-regtests.sh + +#### Compiler-specific flags that may be used to disable some negative over- +# optimization or to silence some warnings. +# We rely on signed integer wraparound on overflow, however clang think it +# can do whatever it wants since it's an undefined behavior, so use -fwrapv +# to be sure we get the intended behavior. +WARN_CFLAGS := -Wtype-limits -Wshift-negative-value -Wshift-overflow=2 \ + -Wduplicated-cond -Wnull-dereference +SPEC_CFLAGS := -Wall -Wextra -Wundef -Wdeclaration-after-statement -Wfatal-errors +SPEC_CFLAGS += $(call cc-all-fast,$(WARN_CFLAGS)) + +SPEC_CFLAGS += $(call cc-opt-alt,-fwrapv,-fno-strict-overflow) +SPEC_CFLAGS += $(cc-wnouwo) +SPEC_CFLAGS += $(call cc-nowarn,address-of-packed-member) +SPEC_CFLAGS += $(call cc-nowarn,unused-label) +SPEC_CFLAGS += $(call cc-nowarn,sign-compare) +SPEC_CFLAGS += $(call cc-nowarn,unused-parameter) +SPEC_CFLAGS += $(call cc-nowarn,clobbered) +SPEC_CFLAGS += $(call cc-nowarn,missing-field-initializers) +SPEC_CFLAGS += $(call cc-nowarn,cast-function-type) +SPEC_CFLAGS += $(call cc-nowarn,string-plus-int) +SPEC_CFLAGS += $(call cc-nowarn,atomic-alignment) + +ifneq ($(ERR),) +SPEC_CFLAGS += -Werror +endif + +#### Memory usage tuning +# If small memory footprint is required, you can reduce the buffer size. There +# are 2 buffers per concurrent session, so 16 kB buffers will eat 32 MB memory +# with 1000 concurrent sessions. Putting it slightly lower than a page size +# will prevent the additional parameters to go beyond a page. 8030 bytes is +# exactly 5.5 TCP segments of 1460 bytes and is generally good. Useful tuning +# macros include : +# SYSTEM_MAXCONN, BUFSIZE, MAXREWRITE, REQURI_LEN, CAPTURE_LEN. +# Example: SMALL_OPTS = -DBUFSIZE=8030 -DMAXREWRITE=1030 -DSYSTEM_MAXCONN=1024 +SMALL_OPTS = + +#### Debug settings +# You can enable debugging on specific code parts by setting DEBUG=-DDEBUG_xxx. +# Use quotes and spaces if multiple options are needed (the DEBUG variables is +# passed as-is to CFLAGS). Please check sources for their exact meaning or do +# not use them at all. Some even more obscure ones might also be available +# without appearing here. Currently defined DEBUG macros include DEBUG_FULL, +# DEBUG_MEM_STATS, DEBUG_DONT_SHARE_POOLS, DEBUG_FD, DEBUG_POOL_INTEGRITY, +# DEBUG_NO_POOLS, DEBUG_FAIL_ALLOC, DEBUG_STRICT_ACTION=[0-3], DEBUG_HPACK, +# DEBUG_AUTH, DEBUG_SPOE, DEBUG_UAF, DEBUG_THREAD, DEBUG_STRICT, DEBUG_DEV, +# DEBUG_TASK, DEBUG_MEMORY_POOLS, DEBUG_POOL_TRACING, DEBUG_QPACK. +DEBUG = -DDEBUG_STRICT -DDEBUG_MEMORY_POOLS + +#### Trace options +# Use TRACE=1 to trace function calls to file "trace.out" or to stderr if not +# possible. +TRACE = + +#### Additional include and library dirs +# Redefine this if you want to add some special PATH to include/libs +ADDINC = +ADDLIB = + +#### Specific macro definitions +# Use DEFINE=-Dxxx to set any tunable macro. Anything declared here will appear +# in the build options reported by "haproxy -vv". Use SILENT_DEFINE if you do +# not want to pollute the report with complex defines. +# The following settings might be of interest when SSL is enabled : +# LISTEN_DEFAULT_CIPHERS is a cipher suite string used to set the default SSL +# ciphers on "bind" lines instead of using OpenSSL's defaults. +# CONNECT_DEFAULT_CIPHERS is a cipher suite string used to set the default +# SSL ciphers on "server" lines instead of using OpenSSL's defaults. +DEFINE = +SILENT_DEFINE = + +#### extra programs to build +# Force this to enable building extra programs or to disable them. +# It's automatically appended depending on the targets. +EXTRA = + +#### CPU dependent optimizations +# Some CFLAGS are set by default depending on the target CPU. Those flags only +# feed CPU_CFLAGS, which in turn feed CFLAGS, so it is not mandatory to use +# them. You should not have to change these options. Better use CPU_CFLAGS or +# even CFLAGS instead. +CPU_CFLAGS.generic = -O2 +CPU_CFLAGS.native = -O2 -march=native +CPU_CFLAGS.i586 = -O2 -march=i586 +CPU_CFLAGS.i686 = -O2 -march=i686 +CPU_CFLAGS.ultrasparc = -O6 -mcpu=v9 -mtune=ultrasparc +CPU_CFLAGS.power8 = -O2 -mcpu=power8 -mtune=power8 +CPU_CFLAGS.power9 = -O2 -mcpu=power9 -mtune=power9 +CPU_CFLAGS.a53 = -O2 -mcpu=cortex-a53 +CPU_CFLAGS.a72 = -O2 -mcpu=cortex-a72 +CPU_CFLAGS.armv81 = -O2 -march=armv8.1-a +CPU_CFLAGS.armv8-auto = -O2 -march=armv8-a+crc -moutline-atomics +CPU_CFLAGS = $(CPU_CFLAGS.$(CPU)) + +#### ARCH dependent flags, may be overridden by CPU flags +ARCH_FLAGS.32 = -m32 +ARCH_FLAGS.64 = -m64 +ARCH_FLAGS.i386 = -m32 -march=i386 +ARCH_FLAGS.i486 = -m32 -march=i486 +ARCH_FLAGS.i586 = -m32 -march=i586 +ARCH_FLAGS.i686 = -m32 -march=i686 +ARCH_FLAGS.x86_64 = -m64 -march=x86-64 +ARCH_FLAGS = $(ARCH_FLAGS.$(ARCH)) + +#### Common CFLAGS +# These CFLAGS contain general optimization options, CPU-specific optimizations +# and debug flags. They may be overridden by some distributions which prefer to +# set all of them at once instead of playing with the CPU and DEBUG variables. +CFLAGS = $(ARCH_FLAGS) $(CPU_CFLAGS) $(DEBUG_CFLAGS) $(SPEC_CFLAGS) + +#### Common LDFLAGS +# These LDFLAGS are used as the first "ld" options, regardless of any library +# path or any other option. They may be changed to add any linker-specific +# option at the beginning of the ld command line. +LDFLAGS = $(ARCH_FLAGS) -g + +#### list of all "USE_*" options. These ones must be updated if new options are +# added, so that the relevant options are properly added to the CFLAGS and to +# the reported build options. +use_opts = USE_EPOLL USE_KQUEUE USE_NETFILTER \ + USE_PCRE USE_PCRE_JIT USE_PCRE2 USE_PCRE2_JIT USE_POLL \ + USE_THREAD USE_BACKTRACE \ + USE_STATIC_PCRE USE_STATIC_PCRE2 USE_TPROXY USE_LINUX_TPROXY \ + USE_LINUX_SPLICE USE_LIBCRYPT USE_CRYPT_H USE_ENGINE \ + USE_GETADDRINFO USE_OPENSSL USE_LUA USE_ACCEPT4 \ + USE_CLOSEFROM USE_ZLIB USE_SLZ USE_CPU_AFFINITY USE_TFO USE_NS \ + USE_DL USE_RT USE_DEVICEATLAS USE_51DEGREES USE_WURFL USE_SYSTEMD \ + USE_OBSOLETE_LINKER USE_PRCTL USE_PROCCTL USE_THREAD_DUMP \ + USE_EVPORTS USE_OT USE_QUIC USE_PROMEX USE_MEMORY_PROFILING + +#### Target system options +# Depending on the target platform, some options are set, as well as some +# CFLAGS and LDFLAGS. All variables pre-set here will not appear in the build +# options string. They may be set to any value, but are historically set to +# "implicit" which eases debugging. You should not have to change anything +# there unless you're adding support for a new platform. +default_opts = $(foreach name,$(1),$(eval $(name)=implicit)) + +# poll() is always supported, unless explicitly disabled by passing USE_POLL="" +# on the make command line. +USE_POLL = default + +# SLZ is always supported unless explicitly disabled by passing USE_SLZ="" +# or disabled by enabling ZLIB using USE_ZLIB=1 +ifeq ($(USE_ZLIB),) +USE_SLZ = default +endif + +# generic system target has nothing specific +ifeq ($(TARGET),generic) + set_target_defaults = $(call default_opts,USE_POLL USE_TPROXY) +endif + +# Haiku +ifeq ($(TARGET),haiku) + TARGET_LDFLAGS = -lnetwork + set_target_defaults = $(call default_opts,USE_POLL USE_TPROXY USE_OBSOLETE_LINKER) +endif + +# For linux >= 2.6.28 and glibc +ifeq ($(TARGET),linux-glibc) + set_target_defaults = $(call default_opts, \ + USE_POLL USE_TPROXY USE_LIBCRYPT USE_DL USE_RT USE_CRYPT_H USE_NETFILTER \ + USE_CPU_AFFINITY USE_THREAD USE_EPOLL USE_LINUX_TPROXY \ + USE_ACCEPT4 USE_LINUX_SPLICE USE_PRCTL USE_THREAD_DUMP USE_NS USE_TFO \ + USE_GETADDRINFO USE_BACKTRACE) + INSTALL = install -v +endif + +# For linux >= 2.6.28, glibc without new features +ifeq ($(TARGET),linux-glibc-legacy) + set_target_defaults = $(call default_opts, \ + USE_POLL USE_TPROXY USE_LIBCRYPT USE_DL USE_RT USE_CRYPT_H USE_NETFILTER \ + USE_CPU_AFFINITY USE_THREAD USE_EPOLL USE_LINUX_TPROXY \ + USE_ACCEPT4 USE_LINUX_SPLICE USE_PRCTL USE_THREAD_DUMP USE_GETADDRINFO) + INSTALL = install -v +endif + +# For linux >= 2.6.28 and musl +ifeq ($(TARGET),linux-musl) + set_target_defaults = $(call default_opts, \ + USE_POLL USE_TPROXY USE_LIBCRYPT USE_DL USE_RT USE_CRYPT_H USE_NETFILTER \ + USE_CPU_AFFINITY USE_THREAD USE_EPOLL USE_LINUX_TPROXY \ + USE_ACCEPT4 USE_LINUX_SPLICE USE_PRCTL USE_THREAD_DUMP USE_NS USE_TFO \ + USE_GETADDRINFO USE_SHM_OPEN) + INSTALL = install -v +endif + +# Solaris 10 and above +ifeq ($(TARGET),solaris) + set_target_defaults = $(call default_opts, \ + USE_POLL USE_TPROXY USE_LIBCRYPT USE_CRYPT_H USE_GETADDRINFO USE_THREAD \ + USE_RT USE_OBSOLETE_LINKER USE_EVPORTS USE_CLOSEFROM) + TARGET_CFLAGS = -DFD_SETSIZE=65536 -D_REENTRANT -D_XOPEN_SOURCE=600 -D__EXTENSIONS__ + TARGET_LDFLAGS = -lnsl -lsocket +endif + +# FreeBSD 10 and above +ifeq ($(TARGET),freebsd) + set_target_defaults = $(call default_opts, \ + USE_POLL USE_TPROXY USE_LIBCRYPT USE_THREAD USE_CPU_AFFINITY USE_KQUEUE \ + USE_ACCEPT4 USE_CLOSEFROM USE_GETADDRINFO USE_PROCCTL) +endif + +# kFreeBSD glibc +ifeq ($(TARGET),freebsd-glibc) + set_target_defaults = $(call default_opts, \ + USE_POLL USE_TPROXY USE_LIBCRYPT USE_THREAD USE_CPU_AFFINITY USE_KQUEUE \ + USE_ACCEPT4 USE_GETADDRINFO USE_CRYPT_H USE_DL) +endif + +# DragonFlyBSD 4.3 and above +ifeq ($(TARGET),dragonfly) + set_target_defaults = $(call default_opts, \ + USE_POLL USE_TPROXY USE_LIBCRYPT USE_THREAD USE_CPU_AFFINITY USE_KQUEUE \ + USE_ACCEPT4 USE_CLOSEFROM USE_GETADDRINFO) +endif + +# Mac OS/X +ifeq ($(TARGET),osx) + set_target_defaults = $(call default_opts, \ + USE_POLL USE_TPROXY USE_LIBCRYPT USE_THREAD USE_CPU_AFFINITY USE_KQUEUE \ + USE_GETADDRINFO) + EXPORT_SYMBOL = -export_dynamic +endif + +# OpenBSD 6.3 and above +ifeq ($(TARGET),openbsd) + set_target_defaults = $(call default_opts, \ + USE_POLL USE_TPROXY USE_LIBCRYPT USE_THREAD USE_KQUEUE USE_ACCEPT4 \ + USE_CLOSEFROM USE_GETADDRINFO) +endif + +# NetBSD 8 and above +ifeq ($(TARGET),netbsd) + set_target_defaults = $(call default_opts, \ + USE_POLL USE_TPROXY USE_LIBCRYPT USE_THREAD USE_KQUEUE USE_ACCEPT4 \ + USE_CLOSEFROM USE_GETADDRINFO) +endif + +# AIX 5.1 only +ifeq ($(TARGET),aix51) + set_target_defaults = $(call default_opts, \ + USE_POLL USE_LIBCRYPT USE_OBSOLETE_LINKER) + TARGET_CFLAGS = -Dss_family=__ss_family -Dip6_hdr=ip6hdr -DSTEVENS_API -D_LINUX_SOURCE_COMPAT -Dunsetenv=my_unsetenv + DEBUG_CFLAGS = +endif + +# AIX 5.2 +ifeq ($(TARGET),aix52) + set_target_defaults = $(call default_opts, \ + USE_POLL USE_LIBCRYPT USE_OBSOLETE_LINKER) + TARGET_CFLAGS = -D_MSGQSUPPORT + DEBUG_CFLAGS = +endif + +# AIX 7.2 and above +ifeq ($(TARGET),aix72-gcc) + set_target_defaults = $(call default_opts, \ + USE_POLL USE_THREAD USE_LIBCRYPT USE_OBSOLETE_LINKER USE_GETADDRINFO) + TARGET_CFLAGS = -D_H_XMEM -D_H_VAR + TARGET_LDFLAGS = -latomic +endif + +# Cygwin +ifeq ($(TARGET),cygwin) + set_target_defaults = $(call default_opts, \ + USE_POLL USE_TPROXY USE_OBSOLETE_LINKER) + # Cygwin adds IPv6 support only in version 1.7 (in beta right now). + TARGET_CFLAGS = $(if $(filter 1.5.%, $(shell uname -r)), -DUSE_IPV6 -DAF_INET6=23 -DINET6_ADDRSTRLEN=46, ) +endif + +# set the default settings according to the target above +$(set_target_defaults) + +# Some architectures require to link with libatomic for atomics of certain +# sizes. These ones are reported as value 1 in the *_LOCK_FREE macros. Value +# 2 indicates that the builtin is native thus doesn't require libatomic. Hence +# any occurrence of 1 indicates libatomic is necessary. It's better to avoid +# linking with it by default as it's not always available nor deployed +# (especially on archs which do not need it). +ifneq ($(USE_THREAD),) +ifneq ($(shell $(CC) $(CFLAGS) -dM -E -xc - </dev/null 2>/dev/null | grep -c 'LOCK_FREE.*1'),0) + USE_LIBATOMIC=1 +endif +endif + +#### Determine version, sub-version and release date. +# If GIT is found, and IGNOREGIT is not set, VERSION, SUBVERS and VERDATE are +# extracted from the last commit. Otherwise, use the contents of the files +# holding the same names in the current directory. + +ifeq ($(IGNOREGIT),) +VERSION := $(shell [ -d .git/. ] && (git describe --tags --match 'v*' --abbrev=0 | cut -c 2-) 2>/dev/null) +ifneq ($(VERSION),) +# OK git is there and works. +SUBVERS := $(shell comms=`git log --format=oneline --no-merges v$(VERSION).. 2>/dev/null | wc -l | tr -d '[:space:]'`; commit=`(git log -1 --pretty=%h --abbrev=6) 2>/dev/null`; [ $$comms -gt 0 ] && echo "-$$commit-$$comms") +VERDATE := $(shell git log -1 --pretty=format:%ci | cut -f1 -d' ' | tr '-' '/') +endif +endif + +# Last commit version not found, take it from the files. +ifeq ($(VERSION),) +VERSION := $(shell cat VERSION 2>/dev/null || touch VERSION) +endif +ifeq ($(SUBVERS),) +SUBVERS := $(shell (grep -v '\$$Format' SUBVERS 2>/dev/null || touch SUBVERS) | head -n 1) +endif +ifeq ($(VERDATE),) +VERDATE := $(shell (grep -v '^\$$Format' VERDATE 2>/dev/null || touch VERDATE) | head -n 1 | cut -f1 -d' ' | tr '-' '/') +endif + +# this one is always empty by default and appended verbatim +EXTRAVERSION = + +#### Build options +# Do not change these ones, enable USE_* variables instead. +OPTIONS_CFLAGS = +OPTIONS_LDFLAGS = +OPTIONS_OBJS = + +#### Extra objects to be built and integrated (used only for development) +EXTRA_OBJS = + +# Return USE_xxx=$(USE_xxx) if the variable was set from the environment or the +# command line. +# Usage: +# BUILD_OPTIONS += $(call ignore_implicit,USE_xxx) +ignore_implicit = $(if $(subst environment,,$(origin $(1))), \ + $(if $(subst command line,,$(origin $(1))),, \ + $(1)=$($(1))), \ + $(1)=$($(1))) \ + +# This variable collects all USE_* values except those set to "implicit". This +# is used to report a list of all flags which were used to build this version. +# Do not assign anything to it. +BUILD_OPTIONS := $(foreach opt,$(use_opts),$(call ignore_implicit,$(opt))) + +# Make a list of all known features with +/- prepended depending on their +# activation status. Must be a macro so that dynamically enabled ones are +# evaluated with their current status. +BUILD_FEATURES = $(foreach opt,$(patsubst USE_%,%,$(sort $(use_opts))),$(if $(USE_$(opt)),+$(opt),-$(opt))) + +# All USE_* options have their equivalent macro defined in the code (some might +# possibly be unused though) +OPTIONS_CFLAGS += $(foreach opt,$(use_opts),$(if $($(opt)),-D$(opt),)) + +ifneq ($(USE_LIBCRYPT),) +ifneq ($(TARGET),openbsd) +ifneq ($(TARGET),osx) +OPTIONS_LDFLAGS += -lcrypt +endif +endif +endif + +ifneq ($(USE_ZLIB),) +# Use ZLIB_INC and ZLIB_LIB to force path to zlib.h and libz.{a,so} if needed. +ZLIB_INC = +ZLIB_LIB = +OPTIONS_CFLAGS += $(if $(ZLIB_INC),-I$(ZLIB_INC)) +OPTIONS_LDFLAGS += $(if $(ZLIB_LIB),-L$(ZLIB_LIB)) -lz +endif + +ifneq ($(USE_SLZ),) +OPTIONS_OBJS += src/slz.o +endif + +ifneq ($(USE_POLL),) +OPTIONS_OBJS += src/ev_poll.o +endif + +ifneq ($(USE_EPOLL),) +OPTIONS_OBJS += src/ev_epoll.o +endif + +ifneq ($(USE_KQUEUE),) +OPTIONS_OBJS += src/ev_kqueue.o +endif + +ifneq ($(USE_EVPORTS),) +OPTIONS_OBJS += src/ev_evports.o +endif + +ifneq ($(USE_DL),) +OPTIONS_LDFLAGS += -ldl +endif + +ifneq ($(USE_RT),) +OPTIONS_LDFLAGS += -lrt +endif + +ifneq ($(USE_THREAD),) +OPTIONS_LDFLAGS += -lpthread +endif + +ifneq ($(USE_BACKTRACE),) +OPTIONS_LDFLAGS += -Wl,$(if $(EXPORT_SYMBOL),$(EXPORT_SYMBOL),--export-dynamic) +endif + +ifneq ($(USE_CPU_AFFINITY),) +OPTIONS_OBJS += src/cpuset.o +endif + +ifneq ($(USE_OPENSSL),) +SSL_INC = +SSL_LIB = +# OpenSSL is packaged in various forms and with various dependencies. +# In general -lssl is enough, but on some platforms, -lcrypto may be needed, +# reason why it's added by default. Some even need -lz, then you'll need to +# pass it in the "ADDLIB" variable if needed. If your SSL libraries are not +# in the usual path, use SSL_INC=/path/to/inc and SSL_LIB=/path/to/lib. +OPTIONS_CFLAGS += $(if $(SSL_INC),-I$(SSL_INC)) +OPTIONS_LDFLAGS += $(if $(SSL_LIB),-L$(SSL_LIB)) -lssl -lcrypto +ifneq ($(USE_DL),) +OPTIONS_LDFLAGS += -ldl +endif +OPTIONS_OBJS += src/ssl_sample.o src/ssl_sock.o src/ssl_crtlist.o src/ssl_ckch.o src/ssl_utils.o src/cfgparse-ssl.o src/jwt.o +endif + +ifneq ($(USE_ENGINE),) +# OpenSSL 3.0 emits loud deprecation warnings by default when building with +# engine support, and this option is made to silence them. Better use it +# only when absolutely necessary, until there's a viable alternative to the +# engine API. +OPTIONS_CFLAGS += -DOPENSSL_SUPPRESS_DEPRECATED +endif + +ifneq ($(USE_QUIC),) +OPTIONS_OBJS += src/quic_sock.o src/proto_quic.o src/xprt_quic.o src/quic_tls.o \ + src/quic_frame.o src/quic_cc.o src/quic_cc_newreno.o src/mux_quic.o \ + src/cbuf.o src/qpack-dec.o src/qpack-tbl.o src/h3.o src/qpack-enc.o \ + src/hq_interop.o src/cfgparse-quic.o src/quic_loss.o \ + src/quic_tp.o src/quic_stream.o src/quic_stats.o src/h3_stats.o \ + src/quic_cc_cubic.o src/qmux_trace.o src/qmux_http.o \ + src/quic_conn.o +endif + +ifneq ($(USE_LUA),) +check_lua_lib = $(shell echo "int main(){}" | $(CC) -o /dev/null -x c - $(2) -l$(1) 2>/dev/null && echo $(1)) +check_lua_inc = $(shell if [ -d $(2)$(1) ]; then echo $(2)$(1); fi;) + +OPTIONS_CFLAGS += $(if $(LUA_INC),-I$(LUA_INC)) +LUA_LD_FLAGS := -Wl,$(if $(EXPORT_SYMBOL),$(EXPORT_SYMBOL),--export-dynamic) $(if $(LUA_LIB),-L$(LUA_LIB)) +ifeq ($(LUA_LIB_NAME),) +# Try to automatically detect the Lua library +LUA_LIB_NAME := $(firstword $(foreach lib,lua5.4 lua54 lua5.3 lua53 lua,$(call check_lua_lib,$(lib),$(LUA_LD_FLAGS)))) +ifeq ($(LUA_LIB_NAME),) +$(error unable to automatically detect the Lua library name, you can enforce its name with LUA_LIB_NAME=<name> (where <name> can be lua5.4, lua54, lua, ...)) +endif +LUA_INC := $(firstword $(foreach lib,lua5.4 lua54 lua5.3 lua53 lua,$(call check_lua_inc,$(lib),"/usr/include/"))) +ifneq ($(LUA_INC),) +OPTIONS_CFLAGS += -I$(LUA_INC) +endif +ifneq ($(HLUA_PREPEND_PATH),) +OPTIONS_CFLAGS += -DHLUA_PREPEND_PATH=$(HLUA_PREPEND_PATH) +BUILD_OPTIONS += HLUA_PREPEND_PATH=$(HLUA_PREPEND_PATH) +endif +ifneq ($(HLUA_PREPEND_CPATH),) +OPTIONS_CFLAGS += -DHLUA_PREPEND_CPATH=$(HLUA_PREPEND_CPATH) +BUILD_OPTIONS += HLUA_PREPEND_CPATH=$(HLUA_PREPEND_CPATH) +endif +endif + +OPTIONS_LDFLAGS += $(LUA_LD_FLAGS) -l$(LUA_LIB_NAME) -lm +ifneq ($(USE_DL),) +OPTIONS_LDFLAGS += -ldl +endif +OPTIONS_OBJS += src/hlua.o src/hlua_fcn.o +endif + +ifneq ($(USE_PROMEX),) +OPTIONS_OBJS += addons/promex/service-prometheus.o +endif + +ifneq ($(USE_DEVICEATLAS),) +# Use DEVICEATLAS_SRC and possibly DEVICEATLAS_INC and DEVICEATLAS_LIB to force path +# to DeviceAtlas headers and libraries if needed. +DEVICEATLAS_SRC = +DEVICEATLAS_INC = $(DEVICEATLAS_SRC) +DEVICEATLAS_LIB = $(DEVICEATLAS_SRC) +ifeq ($(DEVICEATLAS_SRC),) +OPTIONS_LDFLAGS += -lda +else +ifeq ($(USE_PCRE),) +ifeq ($(USE_PCRE2),) +$(error the DeviceAtlas module needs the PCRE or the PCRE2 library in order to compile) +endif +endif +ifneq ($(USE_PCRE2),) +OPTIONS_CFLAGS += -DDA_REGEX_HDR=\"dac_pcre2.c\" -DDA_REGEX_TAG=2 +endif +OPTIONS_OBJS += $(DEVICEATLAS_LIB)/Os/daunix.o +OPTIONS_OBJS += $(DEVICEATLAS_LIB)/dadwcom.o +OPTIONS_OBJS += $(DEVICEATLAS_LIB)/dasch.o +OPTIONS_OBJS += $(DEVICEATLAS_LIB)/json.o +OPTIONS_OBJS += $(DEVICEATLAS_LIB)/dac.o +endif +OPTIONS_OBJS += addons/deviceatlas/da.o +OPTIONS_CFLAGS += $(if $(DEVICEATLAS_INC),-I$(DEVICEATLAS_INC)) +endif + +ifneq ($(USE_51DEGREES),) +# Use 51DEGREES_SRC and possibly 51DEGREES_INC and 51DEGREES_LIB to force path +# to 51degrees headers and libraries if needed. +51DEGREES_SRC = +51DEGREES_INC = $(51DEGREES_SRC) +51DEGREES_LIB = $(51DEGREES_SRC) +OPTIONS_OBJS += $(51DEGREES_LIB)/../cityhash/city.o +OPTIONS_OBJS += $(51DEGREES_LIB)/51Degrees.o +OPTIONS_OBJS += addons/51degrees/51d.o +OPTIONS_CFLAGS += $(if $(51DEGREES_INC),-I$(51DEGREES_INC)) +ifeq ($(USE_THREAD),) +OPTIONS_CFLAGS += -DFIFTYONEDEGREES_NO_THREADING +else +OPTIONS_OBJS += $(51DEGREES_LIB)/../threading.o +endif + +OPTIONS_LDFLAGS += $(if $(51DEGREES_LIB),-L$(51DEGREES_LIB)) -lm +endif + +ifneq ($(USE_WURFL),) +# Use WURFL_SRC and possibly WURFL_INC and WURFL_LIB to force path +# to WURFL headers and libraries if needed. +WURFL_SRC = +WURFL_INC = $(WURFL_SRC) +WURFL_LIB = $(WURFL_SRC) +OPTIONS_OBJS += addons/wurfl/wurfl.o +OPTIONS_CFLAGS += $(if $(WURFL_INC),-I$(WURFL_INC)) +ifneq ($(WURFL_DEBUG),) +OPTIONS_CFLAGS += -DWURFL_DEBUG +endif +ifneq ($(WURFL_HEADER_WITH_DETAILS),) +OPTIONS_CFLAGS += -DWURFL_HEADER_WITH_DETAILS +endif +OPTIONS_LDFLAGS += $(if $(WURFL_LIB),-L$(WURFL_LIB)) -lwurfl +endif + +ifneq ($(USE_SYSTEMD),) +OPTIONS_LDFLAGS += -lsystemd +endif + +ifneq ($(USE_PCRE)$(USE_STATIC_PCRE)$(USE_PCRE_JIT),) +ifneq ($(USE_PCRE2)$(USE_STATIC_PCRE2)$(USE_PCRE2_JIT),) +$(error cannot compile both PCRE and PCRE2 support) +endif +# PCREDIR is used to automatically construct the PCRE_INC and PCRE_LIB paths, +# by appending /include and /lib respectively. If your system does not use the +# same sub-directories, simply force these variables instead of PCREDIR. It is +# automatically detected but can be forced if required (for cross-compiling). +# Forcing PCREDIR to an empty string will let the compiler use the default +# locations. + +PCRE_CONFIG := pcre-config +PCREDIR := $(shell $(PCRE_CONFIG) --prefix 2>/dev/null || echo /usr/local) +ifneq ($(PCREDIR),) +PCRE_INC := $(PCREDIR)/include +PCRE_LIB := $(PCREDIR)/lib +endif + +ifeq ($(USE_STATIC_PCRE),) +# dynamic PCRE +OPTIONS_CFLAGS += -DUSE_PCRE $(if $(PCRE_INC),-I$(PCRE_INC)) +OPTIONS_LDFLAGS += $(if $(PCRE_LIB),-L$(PCRE_LIB)) -lpcreposix -lpcre +else +# static PCRE +OPTIONS_CFLAGS += -DUSE_PCRE $(if $(PCRE_INC),-I$(PCRE_INC)) +OPTIONS_LDFLAGS += $(if $(PCRE_LIB),-L$(PCRE_LIB)) -Wl,-Bstatic -lpcreposix -lpcre -Wl,-Bdynamic +endif +endif + +ifneq ($(USE_PCRE2)$(USE_STATIC_PCRE2)$(USE_PCRE2_JIT),) +PCRE2_CONFIG := pcre2-config +PCRE2DIR := $(shell $(PCRE2_CONFIG) --prefix 2>/dev/null || echo /usr/local) +ifneq ($(PCRE2DIR),) +PCRE2_INC := $(PCRE2DIR)/include +PCRE2_LIB := $(PCRE2DIR)/lib + +ifeq ($(PCRE2_WIDTH),) +PCRE2_WIDTH = 8 +endif + +ifneq ($(PCRE2_WIDTH),8) +ifneq ($(PCRE2_WIDTH),16) +ifneq ($(PCRE2_WIDTH),32) +$(error PCRE2_WIDTH needs to be set to either 8,16 or 32) +endif +endif +endif + + +PCRE2_LDFLAGS := $(shell $(PCRE2_CONFIG) --libs$(PCRE2_WIDTH) 2>/dev/null || echo -L/usr/local/lib -lpcre2-$(PCRE2_WIDTH)) + +ifeq ($(PCRE2_LDFLAGS),) +$(error libpcre2-$(PCRE2_WIDTH) not found) +else +ifeq ($(PCRE2_WIDTH),8) +PCRE2_LDFLAGS += -lpcre2-posix +endif +endif + +OPTIONS_CFLAGS += -DUSE_PCRE2 -DPCRE2_CODE_UNIT_WIDTH=$(PCRE2_WIDTH) +OPTIONS_CFLAGS += $(if $(PCRE2_INC), -I$(PCRE2_INC)) + +ifneq ($(USE_STATIC_PCRE2),) +OPTIONS_LDFLAGS += $(if $(PCRE2_LIB),-L$(PCRE2_LIB)) -Wl,-Bstatic -L$(PCRE2_LIB) $(PCRE2_LDFLAGS) -Wl,-Bdynamic +else +OPTIONS_LDFLAGS += $(if $(PCRE2_LIB),-L$(PCRE2_LIB)) -L$(PCRE2_LIB) $(PCRE2_LDFLAGS) +endif + +endif +endif + +#### Global compile options +VERBOSE_CFLAGS = $(CFLAGS) $(TARGET_CFLAGS) $(SMALL_OPTS) $(DEFINE) +COPTS = -Iinclude + +COPTS += $(CFLAGS) $(TARGET_CFLAGS) $(SMALL_OPTS) $(DEFINE) $(SILENT_DEFINE) +COPTS += $(DEBUG) $(OPTIONS_CFLAGS) $(ADDINC) + +ifneq ($(VERSION)$(SUBVERS)$(EXTRAVERSION),) +COPTS += -DCONFIG_HAPROXY_VERSION=\"$(VERSION)$(SUBVERS)$(EXTRAVERSION)\" +endif + +ifneq ($(VERDATE),) +COPTS += -DCONFIG_HAPROXY_DATE=\"$(VERDATE)\" +endif + +ifneq ($(TRACE),) +# if tracing is enabled, we want it to be as fast as possible +TRACE_COPTS := $(filter-out -O0 -O1 -O2 -pg -finstrument-functions,$(COPTS)) -O3 -fomit-frame-pointer +COPTS += -finstrument-functions +endif + +ifneq ($(USE_NS),) +OPTIONS_OBJS += src/namespace.o +endif + +ifneq ($(USE_OT),) +include addons/ot/Makefile +endif + +ifneq ($(USE_LIBATOMIC),) + TARGET_LDFLAGS += -latomic +endif + +#### Global link options +# These options are added at the end of the "ld" command line. Use LDFLAGS to +# add options at the beginning of the "ld" command line if needed. +LDOPTS = $(TARGET_LDFLAGS) $(OPTIONS_LDFLAGS) $(ADDLIB) + +ifeq ($V,1) +cmd_CC = $(CC) +cmd_LD = $(LD) +cmd_AR = $(AR) +else +ifeq (3.81,$(firstword $(sort $(MAKE_VERSION) 3.81))) +# 3.81 or above +cmd_CC = $(info $ CC $@) $(Q)$(CC) +cmd_LD = $(info $ LD $@) $(Q)$(LD) +cmd_AR = $(info $ AR $@) $(Q)$(AR) +else +# 3.80 or older +cmd_CC = $(Q)echo " CC $@";$(CC) +cmd_LD = $(Q)echo " LD $@";$(LD) +cmd_AR = $(Q)echo " AR $@";$(AR) +endif +endif + +ifeq ($(TARGET),) +all: + @echo "Building HAProxy without specifying a TARGET is not supported." + @echo + @echo "Usage:" + @echo + @echo " $ make help # To print a full explanation." + @echo " $ make TARGET=xxx USE_<feature>=1 # To build HAProxy." + @echo + @echo "The most commonly used targets are:" + @echo + @echo " linux-glibc - Modern Linux with glibc" + @echo " linux-musl - Modern Linux with musl" + @echo " freebsd - FreeBSD" + @echo " openbsd - OpenBSD" + @echo " netbsd - NetBSD" + @echo " osx - macOS" + @echo " solaris - Solaris" + @echo + @echo "Choose the target which matches your OS the most in order to" + @echo "gain the maximum performance out of it." + @echo + @echo "Common features you might want to include in your build are:" + @echo + @echo " USE_OPENSSL=1 - Support for TLS encrypted connections" + @echo " USE_ZLIB=1 - Support for HTTP response compression" + @echo " USE_PCRE=1 - Support for PCRE regular expressions" + @echo " USE_LUA=1 - Support for dynamic processing using Lua" + @echo + @echo "Use 'make help' to print a full explanation of supported targets" + @echo "and features." + @echo + @exit 1 +else +ifneq ($(filter $(TARGET), linux linux22 linux24 linux24e linux26 linux2628),) +all: + @echo + @echo "Target '$(TARGET)' was removed from HAProxy 2.0 due to being irrelevant and" + @echo "often wrong. Please use 'linux-glibc' instead or define your custom target" + @echo "by checking available options using 'make help TARGET=<your-target>'." + @echo + @exit 1 +else +all: haproxy dev/flags/flags $(EXTRA) +endif +endif + +OBJS = + +ifneq ($(EXTRA_OBJS),) +OBJS += $(EXTRA_OBJS) +endif + +OBJS += src/mux_h2.o src/mux_fcgi.o src/mux_h1.o src/tcpcheck.o \ + src/stream.o src/stats.o src/http_ana.o src/server.o \ + src/stick_table.o src/sample.o src/flt_spoe.o src/tools.o \ + src/log.o src/cfgparse.o src/peers.o src/backend.o src/resolvers.o \ + src/cli.o src/connection.o src/proxy.o src/http_htx.o \ + src/cfgparse-listen.o src/pattern.o src/check.o src/haproxy.o \ + src/cache.o src/stconn.o src/http_act.o src/http_fetch.o \ + src/http_client.o src/listener.o src/dns.o src/vars.o src/debug.o \ + src/tcp_rules.o src/sink.o src/h1_htx.o src/task.o src/mjson.o \ + src/h2.o src/filters.o src/server_state.o src/payload.o \ + src/fcgi-app.o src/map.o src/htx.o src/h1.o src/pool.o \ + src/cfgparse-global.o src/trace.o src/tcp_sample.o \ + src/flt_http_comp.o src/mux_pt.o src/flt_trace.o src/mqtt.o \ + src/acl.o src/sock.o src/mworker.o src/tcp_act.o src/ring.o \ + src/session.o src/proto_tcp.o src/fd.o src/channel.o src/activity.o \ + src/queue.o src/lb_fas.o src/http_rules.o src/extcheck.o \ + src/thread.o src/http.o src/lb_chash.o src/applet.o \ + src/compression.o src/raw_sock.o src/ncbuf.o src/frontend.o \ + src/errors.o src/uri_normalizer.o src/http_conv.o src/lb_fwrr.o \ + src/sha1.o src/proto_sockpair.o src/mailers.o src/lb_fwlc.o \ + src/ebmbtree.o src/cfgcond.o src/action.o src/xprt_handshake.o \ + src/protocol.o src/proto_uxst.o src/proto_udp.o src/lb_map.o \ + src/fix.o src/ev_select.o src/arg.o src/sock_inet.o \ + src/mworker-prog.o src/hpack-dec.o src/cfgparse-tcp.o \ + src/sock_unix.o src/shctx.o src/proto_uxdg.o src/fcgi.o \ + src/eb64tree.o src/clock.o src/chunk.o src/cfgdiag.o src/signal.o \ + src/regex.o src/lru.o src/eb32tree.o src/eb32sctree.o \ + src/cfgparse-unix.o src/hpack-tbl.o src/ebsttree.o src/ebimtree.o \ + src/base64.o src/auth.o src/uri_auth.o src/time.o src/ebistree.o \ + src/dynbuf.o src/wdt.o src/pipe.o src/init.o src/http_acl.o \ + src/hpack-huff.o src/hpack-enc.o src/dict.o src/freq_ctr.o \ + src/ebtree.o src/hash.o src/dgram.o src/version.o + +ifneq ($(TRACE),) +OBJS += src/calltrace.o +endif + +# Used only for forced dependency checking. May be cleared during development. +INCLUDES = $(wildcard include/*/*.h) +DEP = $(INCLUDES) .build_opts + +help: + @sed -ne "/^[^#]*$$/q;s/^# \{0,1\}\(.*\)/\1/;p" Makefile + @echo; \ + if [ -n "$(TARGET)" ]; then \ + if [ -n "$(set_target_defaults)" ]; then \ + echo "Current TARGET: $(TARGET)"; \ + else \ + echo "Current TARGET: $(TARGET) (custom target)"; \ + fi; \ + else \ + echo "TARGET not set, you may pass 'TARGET=xxx' to set one among :";\ + echo " linux-glibc, linux-glibc-legacy, solaris, freebsd, dragonfly, netbsd,"; \ + echo " osx, openbsd, aix51, aix52, aix72-gcc, cygwin, haiku, generic,"; \ + echo " custom"; \ + fi + @echo;echo "Enabled features for TARGET '$(TARGET)' (disable with 'USE_xxx=') :" + @set -- $(foreach opt,$(patsubst USE_%,%,$(use_opts)),$(if $(USE_$(opt)),$(opt),)); echo " $$*" | (fmt || cat) 2>/dev/null + @echo;echo "Disabled features for TARGET '$(TARGET)' (enable with 'USE_xxx=1') :" + @set -- $(foreach opt,$(patsubst USE_%,%,$(use_opts)),$(if $(USE_$(opt)),,$(opt))); echo " $$*" | (fmt || cat) 2>/dev/null + +# Used only to force a rebuild if some build options change, but we don't do +# it for certain targets which take no build options +ifneq (reg-tests, $(firstword $(MAKECMDGOALS))) +build_opts = $(shell rm -f .build_opts.new; echo \'$(TARGET) $(BUILD_OPTIONS) $(VERBOSE_CFLAGS) $(DEBUG)\' > .build_opts.new; if cmp -s .build_opts .build_opts.new; then rm -f .build_opts.new; else mv -f .build_opts.new .build_opts; fi) +.build_opts: $(build_opts) +else +.build_opts: +endif + +haproxy: $(OPTIONS_OBJS) $(OBJS) + $(cmd_LD) $(LDFLAGS) -o $@ $^ $(LDOPTS) + +objsize: haproxy + $(Q)objdump -t $^|grep ' g '|grep -F '.text'|awk '{print $$5 FS $$6}'|sort + +%.o: %.c $(DEP) + $(cmd_CC) $(COPTS) -c -o $@ $< + +admin/halog/halog: admin/halog/halog.o admin/halog/fgets2.o src/ebtree.o src/eb32tree.o src/eb64tree.o src/ebmbtree.o src/ebsttree.o src/ebistree.o src/ebimtree.o + $(cmd_LD) $(LDFLAGS) -o $@ $^ $(LDOPTS) + +admin/dyncookie/dyncookie: admin/dyncookie/dyncookie.o + $(cmd_LD) $(LDFLAGS) -o $@ $^ $(LDOPTS) + +dev/flags/flags: dev/flags/flags.o + $(cmd_LD) $(LDFLAGS) -o $@ $^ $(LDOPTS) + +dev/haring/haring: dev/haring/haring.o + $(cmd_LD) $(LDFLAGS) -o $@ $^ $(LDOPTS) + +dev/hpack/%: dev/hpack/%.o + $(cmd_LD) $(LDFLAGS) -o $@ $^ $(LDOPTS) + +dev/poll/poll: + $(Q)$(MAKE) -C dev/poll poll CC='$(cmd_CC)' OPTIMIZE='$(COPTS)' + +dev/tcploop/tcploop: + $(Q)$(MAKE) -C dev/tcploop tcploop CC='$(cmd_CC)' OPTIMIZE='$(COPTS)' + +# rebuild it every time +.PHONY: src/version.c + +src/calltrace.o: src/calltrace.c $(DEP) + $(cmd_CC) $(TRACE_COPTS) -c -o $@ $< + +src/haproxy.o: src/haproxy.c $(DEP) + $(cmd_CC) $(COPTS) \ + -DBUILD_TARGET='"$(strip $(TARGET))"' \ + -DBUILD_ARCH='"$(strip $(ARCH))"' \ + -DBUILD_CPU='"$(strip $(CPU))"' \ + -DBUILD_CC='"$(strip $(CC))"' \ + -DBUILD_CFLAGS='"$(strip $(VERBOSE_CFLAGS))"' \ + -DBUILD_OPTIONS='"$(strip $(BUILD_OPTIONS))"' \ + -DBUILD_DEBUG='"$(strip $(DEBUG))"' \ + -DBUILD_FEATURES='"$(strip $(BUILD_FEATURES))"' \ + -c -o $@ $< + +install-man: + $(Q)$(INSTALL) -d "$(DESTDIR)$(MANDIR)"/man1 + $(Q)$(INSTALL) -m 644 doc/haproxy.1 "$(DESTDIR)$(MANDIR)"/man1 + +EXCLUDE_DOCUMENTATION = lgpl gpl coding-style +DOCUMENTATION = $(filter-out $(EXCLUDE_DOCUMENTATION),$(patsubst doc/%.txt,%,$(wildcard doc/*.txt))) + +install-doc: + $(Q)$(INSTALL) -d "$(DESTDIR)$(DOCDIR)" + $(Q)for x in $(DOCUMENTATION); do \ + $(INSTALL) -m 644 doc/$$x.txt "$(DESTDIR)$(DOCDIR)" ; \ + done + +install-bin: + $(Q)for i in haproxy $(EXTRA); do \ + if ! [ -e "$$i" ]; then \ + echo "Please run 'make' before 'make install'."; \ + exit 1; \ + fi; \ + done + $(Q)$(INSTALL) -d "$(DESTDIR)$(SBINDIR)" + $(Q)$(INSTALL) haproxy $(EXTRA) "$(DESTDIR)$(SBINDIR)" + +install: install-bin install-man install-doc + +uninstall: + $(Q)rm -f "$(DESTDIR)$(MANDIR)"/man1/haproxy.1 + $(Q)for x in $(DOCUMENTATION); do \ + rm -f "$(DESTDIR)$(DOCDIR)"/$$x.txt ; \ + done + $(Q)-rmdir "$(DESTDIR)$(DOCDIR)" + $(Q)rm -f "$(DESTDIR)$(SBINDIR)"/haproxy + +clean: + $(Q)rm -f *.[oas] src/*.[oas] haproxy test .build_opts .build_opts.new + $(Q)for dir in . src dev/* admin/* addons/* include/* doc; do rm -f $$dir/*~ $$dir/*.rej $$dir/core; done + $(Q)rm -f haproxy-$(VERSION).tar.gz haproxy-$(VERSION)$(SUBVERS)$(EXTRAVERSION).tar.gz + $(Q)rm -f haproxy-$(VERSION) haproxy-$(VERSION)$(SUBVERS)$(EXTRAVERSION) nohup.out gmon.out + $(Q)rm -f addons/promex/*.[oas] + $(Q)rm -f addons/51degrees/*.[oas] addons/51degrees/dummy/*.[oas] addons/51degrees/dummy/*/*.[oas] + $(Q)rm -f addons/deviceatlas/*.[oas] addons/deviceatlas/dummy/*.[oas] addons/deviceatlas/dummy/*.o + $(Q)rm -f addons/deviceatlas/dummy/Os/*.o + $(Q)rm -f addons/ot/src/*.[oas] + $(Q)rm -f addons/wurfl/*.[oas] addons/wurfl/dummy/*.[oas] + $(Q)rm -f admin/*/*.[oas] admin/*/*/*.[oas] + $(Q)rm -f admin/iprange/iprange admin/iprange/ip6range admin/halog/halog + $(Q)rm -f admin/dyncookie/dyncookie + $(Q)rm -f dev/*/*.[oas] + $(Q)rm -f dev/flags/flags dev/haring/haring dev/poll/poll dev/tcploop/tcploop + $(Q)rm -f dev/hpack/decode dev/hpack/gen-enc dev/hpack/gen-rht + +tags: + $(Q)find src include \( -name '*.c' -o -name '*.h' \) -print0 | \ + xargs -0 etags --declarations --members + +cscope: + $(Q)find src include -name "*.[ch]" -print | cscope -q -b -i - + +tar: clean + $(Q)ln -s . haproxy-$(VERSION)$(SUBVERS)$(EXTRAVERSION) + $(Q)tar --exclude=haproxy-$(VERSION)$(SUBVERS)$(EXTRAVERSION)/.git \ + --exclude=haproxy-$(VERSION)$(SUBVERS)$(EXTRAVERSION)/haproxy-$(VERSION)$(SUBVERS)$(EXTRAVERSION) \ + --exclude=haproxy-$(VERSION)$(SUBVERS)$(EXTRAVERSION)/haproxy-$(VERSION)$(SUBVERS)$(EXTRAVERSION).tar.gz \ + -cf - haproxy-$(VERSION)$(SUBVERS)$(EXTRAVERSION)/* | gzip -c9 >haproxy-$(VERSION)$(SUBVERS)$(EXTRAVERSION).tar.gz + $(Q)echo haproxy-$(VERSION)$(SUBVERS)$(EXTRAVERSION).tar.gz + $(Q)rm -f haproxy-$(VERSION)$(SUBVERS)$(EXTRAVERSION) + +git-tar: + $(Q)git archive --format=tar --prefix="haproxy-$(VERSION)$(SUBVERS)$(EXTRAVERSION)/" HEAD | gzip -9 > haproxy-$(VERSION)$(SUBVERS)$(EXTRAVERSION).tar.gz + $(Q)echo haproxy-$(VERSION)$(SUBVERS)$(EXTRAVERSION).tar.gz + +version: + @echo "VERSION: $(VERSION)" + @echo "SUBVERS: $(SUBVERS)" + @echo "VERDATE: $(VERDATE)" + +# never use this one if you don't know what it is used for. +update-version: + @echo "Ready to update the following versions :" + @echo "VERSION: $(VERSION)" + @echo "SUBVERS: $(SUBVERS)" + @echo "VERDATE: $(VERDATE)" + @echo "Press [ENTER] to continue or Ctrl-C to abort now.";read + echo "$(VERSION)" > VERSION + echo "$(SUBVERS)" > SUBVERS + echo "$(VERDATE)" > VERDATE + +# just display the build options +opts: + @echo -n 'Using: ' + @echo -n 'TARGET="$(strip $(TARGET))" ' + @echo -n 'ARCH="$(strip $(ARCH))" ' + @echo -n 'CPU="$(strip $(CPU))" ' + @echo -n 'CC="$(strip $(CC))" ' + @echo -n 'ARCH_FLAGS="$(strip $(ARCH_FLAGS))" ' + @echo -n 'CPU_CFLAGS="$(strip $(CPU_CFLAGS))" ' + @echo -n 'DEBUG_CFLAGS="$(strip $(DEBUG_CFLAGS))" ' + @echo "$(strip $(BUILD_OPTIONS))" + @echo 'COPTS="$(strip $(COPTS))"' + @echo 'LDFLAGS="$(strip $(LDFLAGS))"' + @echo 'LDOPTS="$(strip $(LDOPTS))"' + @echo 'OPTIONS_OBJS="$(strip $(OPTIONS_OBJS))"' + @echo 'OBJS="$(strip $(OBJS))"' + +ifeq (reg-tests, $(firstword $(MAKECMDGOALS))) + REGTEST_ARGS := $(wordlist 2, $(words $(MAKECMDGOALS)), $(MAKECMDGOALS)) + $(eval $(REGTEST_ARGS):;@true) +endif + +# Target to run the regression testing script files. +reg-tests: + $(Q)$(REG_TEST_SCRIPT) --type "$(REGTESTS_TYPES)" $(REGTEST_ARGS) $(REG_TEST_FILES) +.PHONY: $(REGTEST_ARGS) + +reg-tests-help: + @echo + @echo "To launch the reg tests for haproxy, first export to your environment " + @echo "VTEST_PROGRAM variable to point to your vtest program:" + @echo " $$ export VTEST_PROGRAM=/opt/local/bin/vtest" + @echo "or" + @echo " $$ setenv VTEST_PROGRAM /opt/local/bin/vtest" + @echo + @echo "The same thing may be done to set your haproxy program with HAPROXY_PROGRAM " + @echo "but with ./haproxy as default value." + @echo + @echo "To run all the tests:" + @echo " $$ make reg-tests" + @echo + @echo "You can also set the programs to be used on the command line:" + @echo " $$ VTEST_PROGRAM=<...> HAPROXY_PROGRAM=<...> make reg-tests" + @echo + @echo "To run tests with specific types:" + @echo " $$ REGTESTS_TYPES=slow,default make reg-tests" + @echo + @echo "with 'default,bug,devel,slow' as default value for REGTESTS_TYPES variable." + @echo + @echo "About the reg test types:" + @echo " any : all the tests without distinction (this is the default" + @echo " value of REGTESTS_TYPES." + @echo " default : dedicated to pure haproxy compliance tests." + @echo " slow : scripts which take non negligible time to run." + @echo " bug : scripts in relation with bugs they help to reproduce." + @echo " broken : scripts triggering known broken behaviors for which" + @echo " there is still no fix." + @echo " experimental: for scripts which are experimental, typically used to" + @echo " develop new scripts." + @echo + @echo "Note that 'reg-tests' target run '"$(REG_TEST_SCRIPT)"' script" + @echo "(see --help option of this script for more information)." + +.PHONY: reg-tests reg-tests-help |