From da76459dc21b5af2449af2d36eb95226cb186ce2 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 28 Apr 2024 11:35:11 +0200 Subject: Adding upstream version 2.6.12. Signed-off-by: Daniel Baumann --- BRANCHES | 239 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 239 insertions(+) create mode 100644 BRANCHES (limited to 'BRANCHES') diff --git a/BRANCHES b/BRANCHES new file mode 100644 index 0000000..53b2ee9 --- /dev/null +++ b/BRANCHES @@ -0,0 +1,239 @@ +HAProxy branches and life cycle +=============================== + +The HAProxy project evolves quickly to stay up to date with modern features +found in web environments but also takes a great care of addressing bugs which +may affect deployed versions without forcing such users to upgrade when not +needed. For this reason the project is developed in branches. + +A branch is designated as two numbers separated by a dot, for example "1.8". +This numbering is historical. Each new development cycle increases the second +digit by one, and after it reaches '9' it goes back to zero and the first digit +increases by one. It effectively grows as a decimal number increased by 0.1 per +version. + +The complete version is made of the branch suffixed with "-dev" followed by a +sequence number during development, then by "." followed by a number when the +development of that branch is finished and the branch enters a maintenance +phase. The first release of a branch starts at ".0". Immediately after ".0" is +issued, the next branch is created as "-dev0" as an exact copy of the previous +branch's ".0" version. Thus we observe the following development sequence: + + ... 1.9-dev10 -> 1.9-dev11 -> 1.9.0 -> 2.0-dev0 -> 2.0-dev1 ... 2.0 -> ... + +Occasionally a series of "-rc" versions may be emitted between the latest -dev +and the release to mark the end of development and start of stabilizing, though +it's mostly a signal send to users that the release is approaching rather than +a change in the cycle as it is always hard to categorize patches. + +Very often the terms "branch" and "version" will be used interchangeably with +only the first two digits to designate "the latest version of that branch". So +when someone asks you "Could you please try the same on 1.8", it means "1.8.X" +with X as high as possible, thus for example 1.8.20 if this one is available at +this moment. + +During the maintenance phase, a maintenance branch is created for the just +released version. The development version remains in the development branch +called "master", or sometimes "-dev". If branches are represented vertically +and time horizontally, this will look like this: + + versions branch + 1.9-dev10 1.9-dev11 1.9.0 2.0-dev0 2.0-dev1 2.0-dev2 + ----+--------+---------+-------+---------+---------+----------> master + \ + \ 1.9.1 1.9.2 + `-----------+-------------+---------> 1.9 + +Each released version (e.g. 1.9.0 above) appears once in the master branch so +that it is easy to list history of changes between versions. + +Before version 1.4, development and maintenance were inter-mixed in the same +branch, which resulted in latest maintenance branches becoming unstable after +some point. This is why versions 1.3.14 and 1.3.15 became maintenance branches +on their own while the development pursued on 1.3 to stabilize again in the +latest versions. + +Starting with version 1.4.0, a rule has been set not to create new features +into a maintenance branch. It was not well respected and still created trouble +with certain 1.4 versions causing regressions and confusing users. + +Since 1.5.0 this "no new feature" rule has become strict and maintenance +versions only contain bug fixes that are necessary in this branch. This means +that any version X.Y.Z is necessarily more stable than X.Y.W with W master + 1.9.4 \ 1.9.5 1.9.6 1.9.7 + --+------------o-------+---------+-------------+------> 1.9 + 1.8.18 \ 1.8.19 1.8.20 + -----+-----------o------------+-------------+---------> 1.8 + +This principle ensures that you will always have a safe upgrade path from an +older branch to a newer: under no circumstances a bug that was already fixed +in an older branch will still be present in a newer one. In the diagram above, +a bug reported for 1.8.18 would be fixed between 2.0-dev4 and 2.0-dev5. The +fix will be backported into 1.9 and from there into 1.8. 1.9.5 will be issued +with the fix before 1.8.19 will be issued. This guarantees that for any version +1.8 having the fix, there always exists a version 1.9 with it as well. So if +you would upgrade to 1.8.19 to benefit from the fix and the next day decide +that for whatever new feature you need to upgrade to 1.9, you'll have 1.9.5 +available with the same set of fixes so you will not reintroduce a previously +fixed problem. + +In practice, it takes longer to release older versions than newer ones. There +are two reasons to this. One is technical: the fixes often require some +adaptations to be done for older versions. The other reason is stability: in +spite of the great care and the tests, there is always a faint risk that a fix +introduces a regression. By leaving fixes exposed in more recent versions +before appearing in older ones, there is a much smaller probability that such a +regression remains undetected when the next version of the older branch is +issued. + +So the rule for the best stability is very simple: + + STICK TO THE BRANCH THAT SUITS YOUR NEEDS AND APPLY ALL UPDATES. + +With other projects, some people developed a culture of backporting only a +selection of fixes into their own maintenance branch. Usually they consider +these fixes are critical, or security-related only. THIS IS TERRIBLY WRONG. +It is already very difficult for the developers who made the initial patch to +figure if and how it must be backported to an older branch, what extra patches +it depends on to be safe, as you can imagine it is impossible for anyone else +to make a safe guess about what to pick. + + A VERSION WHICH ONLY CONTAINS A SELECTION OF FIXES IS WAY MORE + DANGEROUS AND LESS STABLE THAN ONE WITHOUT ANY OF THESE FIXES. + +Branches up to 1.8 are all designated as "long-term supported" ("LTS" for +short), which means that they are maintained for several years after the +release. These branches were emitted at a pace of one per year since 1.5 in +2014. As of 2019, 1.5 is still supported and widely used, even though it very +rarely receives updates. After a few years these LTS branches enter a +"critical fixes only" status, which means that they will rarely receive a fix +but if that a critital issue affects them, a release will be made, with or +without any other fix. Once a version is not supported anymore, it will not +receive any fix at all and it will really be time for you to upgrade to a more +recent branch. Please note that even when an upgrade is needed, a great care is +given to backwards compatibility so that most configs written for version 1.1 +still work with little to no modification 16 years later on version 2.0. + +Since 1.9, the release pacing has increased to match faster moving feature sets +and a faster stabilization of the technical foundations. The principle is now +the following: + - one release is emitted between October and December, with an odd version + number (such as "1.9"). This version heavily focuses on risky changes that + are considered necessary to develop new features. It can for example bring + nice performance improvements as well as invisible changes that will serve + later ; these versions will only be emitted for developers and highly + skilled users. They will not be maintained for a long time, they will + receive updates for 12 to 18 months only after which they will be marked + End-Of-Life ("EOL" for short). They may receive delicate fixes during their + maintenance cycle so users have to be prepared to see some breakage once in + a while as fixes are stabilizing. THESE VERSIONS MUST ABSOLUTELY NOT BE + PACKAGED BY OPERATING SYSTEM VENDORS. + + - one release is emitted between May and June, with an even version number + (such as "2.0"). This version mostly relies on the technical foundations + brought by the previous release and tries hard not to apply risky changes. + Instead it will bring new user-visible features. Such versions will be + long-term supported and may be packaged by operating system vendors. + +This development model provides better stability for end users and better +feedback for developers: + - regular users stick to LTS versions which rely on the same foundations + as the previous releases that had 6 months to stabilize. In terms of + stability it really means that the point zero version already accumulated + 6 months of fixes and that it is much safer to use even just after it is + released. + + - for developers, given that the odd versions are solely used by highly + skilled users, it's easier to get advanced traces and captures, and there + is less pressure during bug reports because there is no doubt the user is + autonomous and knows how to work around the issue or roll back to the last + working version. + +Thus the release cycle from 1.8 to 2.2 should look like this: + + 1.8.0 1.9.0 2.0.0 2.1.0 2.2.0 + --+---------------+---------------+--------------+--------------+----> master + \ \ \ \ \ + \ \ \ \ `--> 2.2 LTS + \ \ \ `--+--+--+---+---> 2.1 + \ \ `----+-----+------+-------+----> 2.0 LTS + \ `--+-+-+--+---+------+--------+-----| EOL 1.9 + `---+---+---+-----+-------+-----------+---------------+------> 1.8 LTS + +In short the non-LTS odd releases can be seen as technological previews of the +next feature release, and will be terminated much earlier. The plan is to barely +let them overlap with the next non-LTS release, allowing advanced users to +always have the choice between the last two major releases. + +With all this in mind, what version should you use ? It's quite simple: + - if you're a first-time HAProxy user, just use the version provided by your + operating system. Just take a look at the "known bugs" section on the + haproxy.org web site to verify that it's not affected by bugs that could + have an impact for you. + + - if you don't want or cannot use the version shipped with your operating + system, it is possible that other people (including the package maintainer) + provide alternate versions. This is the case for Debian and Ubuntu for + example, where you can choose your distribution and pick the branch you + need here: https://haproxy.debian.net/ + + - if you want to build with specific options, apply some patches, you'll + have to build from sources. If you have little experience or are not + certain to devote regular time to perform this task, take an "old" branch + (i.e. 1-2 years old max, for example 1.8 when 2.0 is emitted). You'll avoid + most bugs and will not have to work too often to update your local version. + + - if you need a fresh version for application development, or to benefit from + latest improvements, take the most recent version of the most recent branch + and keep it up to date. You may even want to use the Git version or nightly + snapshots. + + - if you want to develop on HAProxy, use the master from the Git tree. + + - if you want to follow HAProxy's development by doing some tests without + the burden of entering too much into the development process, just use the + -dev versions of the master branch. At some point you'll feel the urge to + switch to the Git version anyway as it will ultimately simplify your work. + + - if you're installing it on unmanaged servers with little to no hostile + exposure, or your home router, you should pick the latest version in one + of the oldest supported branches. While it doesn't guarantee that you will + never have to upgrade it, at least as long as you don't use too complex a + setup, it's unlikely that you will need to update it often. + +And as a general rule, do not put a non-LTS version on a server unless you are +absolutely certain you are going to keep it up to date yourself and already +plan to replace it once the following LTS version is issued. If you are not +going to manage updates yourself, use pre-packaged versions exclusively and do +not expect someone else to have to deal with the burden of building from +sources. -- cgit v1.2.3