From da76459dc21b5af2449af2d36eb95226cb186ce2 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 28 Apr 2024 11:35:11 +0200 Subject: Adding upstream version 2.6.12. Signed-off-by: Daniel Baumann --- doc/SPOE.txt | 1255 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 1255 insertions(+) create mode 100644 doc/SPOE.txt (limited to 'doc/SPOE.txt') diff --git a/doc/SPOE.txt b/doc/SPOE.txt new file mode 100644 index 0000000..9a4cc4b --- /dev/null +++ b/doc/SPOE.txt @@ -0,0 +1,1255 @@ + ----------------------------------------------- + Stream Processing Offload Engine (SPOE) + Version 1.2 + ( Last update: 2020-06-13 ) + ----------------------------------------------- + Author : Christopher Faulet + Contact : cfaulet at haproxy dot com + + +SUMMARY +-------- + + 0. Terms + 1. Introduction + 2. SPOE configuration + 2.1. SPOE scope + 2.2. "spoe-agent" section + 2.3. "spoe-message" section + 2.4. "spoe-group" section + 2.5. Example + 3. SPOP specification + 3.1. Data types + 3.2. Frames + 3.2.1. Frame capabilities + 3.2.2. Frame types overview + 3.2.3. Workflow + 3.2.4. Frame: HAPROXY-HELLO + 3.2.5. Frame: AGENT-HELLO + 3.2.6. Frame: NOTIFY + 3.2.7. Frame: ACK + 3.2.8. Frame: HAPROXY-DISCONNECT + 3.2.9. Frame: AGENT-DISCONNECT + 3.3. Events & messages + 3.4. Actions + 3.5. Errors & timeouts + 4. Logging + + +0. Terms +--------- + +* SPOE : Stream Processing Offload Engine. + + A SPOE is a filter talking to servers managed by a SPOA to offload the + stream processing. An engine is attached to a proxy. A proxy can have + several engines. Each engine is linked to an agent and only one. + +* SPOA : Stream Processing Offload Agent. + + A SPOA is a service that will receive info from a SPOE to offload the + stream processing. An agent manages several servers. It uses a backend to + reference all of them. By extension, these servers can also be called + agents. + +* SPOP : Stream Processing Offload Protocol, used by SPOEs to talk to SPOA + servers. + + This protocol is used by engines to talk to agents. It is an in-house + binary protocol described in this documentation. + + +1. Introduction +---------------- + +SPOE is a feature introduced in HAProxy 1.7. It makes possible the +communication with external components to retrieve some info. The idea started +with the problems caused by most ldap libs not working fine in event-driven +systems (often at least the connect() is blocking). So, it is hard to properly +implement Single Sign On solution (SSO) in HAProxy. The SPOE will ease this +kind of processing, or we hope so. + +Now, the aim of SPOE is to allow any kind of offloading on the streams. First +releases won't do lot of things. As we will see, there are few handled events +and even less actions supported. Actually, for now, the SPOE can offload the +processing before "tcp-request content", "tcp-response content", "http-request" +and "http-response" rules. And it only supports variables definition. But, in +spite of these limited features, we can easily imagine to implement SSO +solution, ip reputation or ip geolocation services. + +Some example implementations in various languages are linked to from the +HAProxy Wiki page dedicated to this mechanism: + + https://github.com/haproxy/wiki/wiki/SPOE:-Stream-Processing-Offloading-Engine + +2. SPOE configuration +---------------------- + +Because SPOE is implemented as a filter, To use it, you must declare a "filter +spoe" line in a proxy section (frontend/backend/listen) : + + frontend my-front + ... + filter spoe [engine ] config + ... + +The "config" parameter is mandatory. It specififies the SPOE configuration +file. The engine name is optional. It can be set to declare the scope to use in +the SPOE configuration. So it is possible to use the same SPOE configuration +for several engines. If no name is provided, the SPOE configuration must not +contain any scope directive. + +We use a separate configuration file on purpose. By commenting SPOE filter +line, you completely disable the feature, including the parsing of sections +reserved to SPOE. This is also a way to keep the HAProxy configuration clean. + +A SPOE configuration file must contains, at least, the SPOA configuration +("spoe-agent" section) and SPOE messages/groups ("spoe-message" or "spoe-group" +sections) attached to this agent. + +IMPORTANT : The configuration of a SPOE filter must be located in a dedicated +file. But the backend used by a SPOA must be declared in HAProxy configuration +file. + +2.1. SPOE scope +------------------------- + +If you specify an engine name on the SPOE filter line, then you need to define +scope in the SPOE configuration with the same name. You can have several SPOE +scope in the same file. In each scope, you must define one and only one +"spoe-agent" section to configure the SPOA linked to your SPOE and several +"spoe-message" and "spoe-group" sections to describe, respectively, messages and +group of messages sent to servers mananged by your SPOA. + +A SPOE scope starts with this kind of line : + + [] + +where is the same engine name specified on the SPOE filter line. The +scope ends when the file ends or when another scope is found. + + Example : + [my-first-engine] + spoe-agent my-agent + ... + spoe-message msg1 + ... + spoe-message msg2 + ... + spoe-group grp1 + ... + spoe-group grp2 + ... + + [my-second-engine] + ... + +If no engine name is provided on the SPOE filter line, no SPOE scope must be +found in the SPOE configuration file. All the file is considered to be in the +same anonymous and implicit scope. + +The engine name must be uniq for a proxy. If no engine name is provided on the +SPOE filter line, the SPOE agent name is used by default. + +2.2. "spoe-agent" section +-------------------------- + +For each engine, you must define one and only one "spoe-agent" section. In this +section, you will declare SPOE messages and the backend you will use. You will +also set timeouts and options to customize your agent's behaviour. + + +spoe-agent + Create a new SPOA with the name . It must have one and only one + "spoe-agent" definition by SPOE scope. + + Arguments : + is the name of the agent section. + + following keywords are supported : + - groups + - log + - maxconnrate + - maxerrrate + - max-frame-size + - max-waiting-frames + - messages + - [no] option async + - [no] option dontlog-normal + - [no] option pipelining + - [no] option send-frag-payload + - option continue-on-error + - option force-set-var + - option set-on-error + - option set-process-time + - option set-total-time + - option var-prefix + - register-var-names + - timeout hello|idle|processing + - use-backend + + +groups ... + Declare the list of SPOE groups that an agent will handle. + + Arguments : + is the name of a SPOE group. + + Groups declared here must be found in the same engine scope, else an error is + triggered during the configuration parsing. You can have many "groups" lines. + + See also: "spoe-group" section. + + +log global +log
[len ] [format ] [ []] +no log + Enable per-instance logging of events and traffic. + + Prefix : + no should be used when the logger list must be flushed. + + See the HAProxy Configuration Manual for details about this option. + +maxconnrate + Set the maximum number of connections per second to . The SPOE will + stop to open new connections if the maximum is reached and will wait to + acquire an existing one. So it is important to set "timeout hello" to a + relatively small value. + + +maxerrrate + Set the maximum number of errors per second to . The SPOE will stop + its processing if the maximum is reached. + + +max-frame-size + Set the maximum allowed size for frames exchanged between HAProxy and SPOA. + It must be in the range [256, tune.bufsize-4] (4 bytes are reserved for the + frame length). By default, it is set to (tune.bufsize-4). + +max-waiting-frames + Set the maximum number of frames waiting for an acknowledgement on the same + connection. This value is only used when the pipelinied or asynchronus + exchanges between HAProxy and SPOA are enabled. By default, it is set to 20. + +messages ... + Declare the list of SPOE messages that an agent will handle. + + Arguments : + is the name of a SPOE message. + + Messages declared here must be found in the same engine scope, else an error + is triggered during the configuration parsing. You can have many "messages" + lines. + + See also: "spoe-message" section. + + +option async +no option async + Enable or disable the support of asynchronus exchanges between HAProxy and + SPOA. By default, this option is enabled. + + +option continue-on-error + Do not stop the events processing when an error occurred on a stream. + + By default, for a specific stream, when an abnormal/unexpected error occurs, + the SPOE is disabled for all the transaction. So if you have several events + configured, such error on an event will disabled all following. For TCP + streams, this will disable the SPOE for the whole session. For HTTP streams, + this will disable it for the transaction (request and response). + + When set, this option bypass this behaviour and only the current event will + be ignored. + + +option dontlog-normal +no option dontlog-normal + Enable or disable logging of normal, successful processing. + + Arguments : none + + See also: "log" and section 4 about logging. + + +option force-set-var + By default, SPOE filter only register already known variables (mainly from + parsing of the configuration), and process-wide variables (those of scope + "proc") cannot be created. If you want that haproxy trusts the agent and + registers all variables (ex: can be useful for LUA workload), activate this + option. + + Caution : this option opens to a variety of attacks such as a rogue SPOA that + asks to register too many variables. + + +option pipelining +no option pipelining + Enable or disable the support of pipelined exchanges between HAProxy and + SPOA. By default, this option is enabled. + + +option send-frag-payload +no option send-frag-payload + Enable or disable the sending of fragmented payload to SPOA. By default, this + option is enabled. + + +option set-on-error + Define the variable to set when an error occurred during an event processing. + + Arguments : + + is the variable name, without the scope. The name may only + contain characters 'a-z', 'A-Z', '0-9', '.' and '_'. + + This variable will only be set when an error occurred in the scope of the + transaction. As for all other variables define by the SPOE, it will be + prefixed. So, if your variable name is "error" and your prefix is + "my_spoe_pfx", the variable will be "txn.my_spoe_pfx.error". + + When set, the variable is an integer representing the error reason. For values + under 256, it represents an error coming from the engine. Below 256, it + reports a SPOP error. In this case, to retrieve the right SPOP status code, + you must remove 256 to this value. Here are possible values: + + * 1 a timeout occurred during the event processing. + + * 2 an error was triggered during the resources allocation. + + * 3 the frame payload exceeds the frame size and it cannot be + fragmented. + + * 4 the fragmentation of a payload is aborted. + + * 5 The frame processing has been interrupted by HAProxy. + + * 255 an unknown error occurred during the event processing. + + * 256+N a SPOP error occurred during the event processing (see section + "Errors & timeouts"). + + Note that if "option continue-on-error" is set, the variable is not + automatically removed between events processing. + + See also: "option continue-on-error", "option var-prefix". + + +option set-process-time + Define the variable to set to report the processing time of the last event or + group. + + Arguments : + + is the variable name, without the scope. The name may only + contain characters 'a-z', 'A-Z', '0-9', '.' and '_'. + + This variable will be set in the scope of the transaction. As for all other + variables define by the SPOE, it will be prefixed. So, if your variable name + is "process_time" and your prefix is "my_spoe_pfx", the variable will be + "txn.my_spoe_pfx.process_time". + + When set, the variable is an integer representing the delay to process the + event or the group, in milliseconds. From the stream point of view, it is the + latency added by the SPOE processing for the last handled event or group. + + If several events or groups are processed for the same stream, this value + will be overrideen. + + See also: "option set-total-time". + + +option set-total-time + Define the variable to set to report the total processing time SPOE for a + stream. + + Arguments : + + is the variable name, without the scope. The name may only + contain characters 'a-z', 'A-Z', '0-9', '.' and '_'. + + This variable will be set in the scope of the transaction. As for all other + variables define by the SPOE, it will be prefixed. So, if your variable name + is "total_time" and your prefix is "my_spoe_pfx", the variable will be + "txn.my_spoe_pfx.total_time". + + When set, the variable is an integer representing the sum of processing times + for a stream, in milliseconds. From the stream point of view, it is the + latency added by the SPOE processing. + + If several events or groups are processed for the same stream, this value + will be updated. + + See also: "option set-process-time". + + +option var-prefix + Define the prefix used when variables are set by an agent. + + Arguments : + + is the prefix used to limit the scope of variables set by an + agent. + + To avoid conflict with other variables defined by HAProxy, all variables + names will be prefixed. By default, the "spoe-agent" name is used. This + option can be used to customize it. + + The prefix will be added between the variable scope and its name, separated + by a '.'. It may only contain characters 'a-z', 'A-Z', '0-9', '.' and '_', as + for variables name. In HAProxy configuration, you need to use this prefix as + a part of the variables name. For example, if an agent define the variable + "myvar" in the "txn" scope, with the prefix "my_spoe_pfx", then you should + use "txn.my_spoe_pfx.myvar" name in your HAProxy configuration. + + By default, an agent will never set new variables at runtime: It can only set + new value for existing ones. If you want a different behaviour, see + force-set-var option and register-var-names directive. + +register-var-names ... + Register some variable names. By default, an agent will not be allowed to set + new variables at runtime. This rule can be totally relaxed by setting the + option "force-set-var". If you know all the variables you will need, this + directive is a good way to register them without letting an agent doing what + it want. This is only required if these variables are not referenced anywhere + in the HAProxy configuration or the SPOE one. + + Arguments: + is a variable name without the scope. The name may only + contain characters 'a-z', 'A-Z', '0-9', '.' and '_'. + + The prefix will be automatically added during the registration. You can have + many "register-var-names" lines. + + See also: "option force-set-var", "option var-prefix". + +timeout hello + Set the maximum time to wait for an agent to receive the AGENT-HELLO frame. + It is applied on the stream that handle the connection with the agent. + + Arguments : + is the timeout value specified in milliseconds by default, but + can be in any other unit if the number is suffixed by the unit, + as explained at the top of this document. + + This timeout is an applicative timeout. It differ from "timeout connect" + defined on backends. + + +timeout idle + Set the maximum time to wait for an agent to close an idle connection. It is + applied on the stream that handle the connection with the agent. + + Arguments : + is the timeout value specified in milliseconds by default, but + can be in any other unit if the number is suffixed by the unit, + as explained at the top of this document. + + +timeout processing + Set the maximum time to wait for a stream to process an event, i.e to acquire + a stream to talk with an agent, to encode all messages, to send the NOTIFY + frame, to receive the corresponding acknowledgement and to process all + actions. It is applied on the stream that handle the client and the server + sessions. + + Arguments : + is the timeout value specified in milliseconds by default, but + can be in any other unit if the number is suffixed by the unit, + as explained at the top of this document. + + +use-backend + Specify the backend to use. It must be defined. + + Arguments : + is the name of a valid "backend" section. + + +2.3. "spoe-message" section +---------------------------- + +To offload the stream processing, SPOE will send messages with specific +information at a specific moment in the stream life and will wait for +corresponding replies to know what to do. + + +spoe-message + Create a new SPOE message with the name . + + Arguments : + is the name of the SPOE message. + + Here you define a message that can be referenced in a "spoe-agent" + section. Following keywords are supported : + - acl + - args + - event + + See also: "spoe-agent" section. + + +acl [flags] [operator] ... + Declare or complete an access list. + + See section 7 about ACL usage in the HAProxy Configuration Manual. + + +args [name=] ... + Define arguments passed into the SPOE message. + + Arguments : + is a sample expression. + + When the message is processed, if a sample expression is not available, it is + set to NULL. Arguments are processed in their declaration order and added in + the message in that order. It is possible to declare named arguments. + + For example: + args frontend=fe_id src dst + + +event [ { if | unless } ] + Set the event that triggers sending of the message. It may optionally be + followed by an ACL-based condition, in which case it will only be evaluated + if the condition is true. A SPOE message can only be sent on one event. If + several events are defined, only the last one is considered. + + ACL-based conditions are executed in the context of the stream that handle + the client and the server connections. + + Arguments : + is the event name. + is a standard ACL-based condition. + + Supported events are: + - on-client-session + - on-server-session + - on-frontend-tcp-request + - on-backend-tcp-request + - on-tcp-response + - on-frontend-http-request + - on-backend-http-request + - on-http-response + + See section "Events & Messages" for more details about supported events. + See section 7 about ACL usage in the HAProxy Configuration Manual. + +2.4. "spoe-group" section +-------------------------- + +This section can be used to declare a group of SPOE messages. Unlike messages +referenced in a "spoe-agent" section, messages inside a group are not sent on a +specific event. The sending must be triggered by TCP or HTTP rules, from the +HAProxy configuration. + + +spoe-group + Create a new SPOE group with the name . + + Arguments : + is the name of the SPOE group. + + Here you define a group of SPOE messages that can be referenced in a + "spoe-agent" section. Following keywords are supported : + - messages + + See also: "spoe-agent" and "spoe-message" sections. + + +messages ... + Declare the list of SPOE messages belonging to the group. + + Arguments : + is the name of a SPOE message. + + Messages declared here must be found in the same engine scope, else an error + is triggered during the configuration parsing. Furthermore, a message belongs + at most to a group. You can have many "messages" lines. + + See also: "spoe-message" section. + + +2.5. Example +------------- + +Here is a simple but complete example that sends client-ip address to a ip +reputation service. This service can set the variable "ip_score" which is an +integer between 0 and 100, indicating its reputation (100 means totally safe +and 0 a blacklisted IP with no doubt). + + ### + ### HAProxy configuration + frontend www + mode http + bind *:80 + + filter spoe engine ip-reputation config spoe-ip-reputation.conf + + # Reject connection if the IP reputation is under 20 + tcp-request content reject if { var(sess.iprep.ip_score) -m int lt 20 } + + default_backend http-servers + + backend http-servers + mode http + server http A.B.C.D:80 + + backend iprep-servers + mode tcp + balance roundrobin + + timeout connect 5s # greater than hello timeout + timeout server 3m # greater than idle timeout + + server iprep1 A1.B1.C1.D1:12345 + server iprep2 A2.B2.C2.D2:12345 + + #### + ### spoe-ip-reputation.conf + [ip-reputation] + + spoe-agent iprep-agent + messages get-ip-reputation + + option var-prefix iprep + + timeout hello 2s + timeout idle 2m + timeout processing 10ms + + use-backend iprep-servers + + spoe-message get-ip-reputation + args ip=src + event on-client-session if ! { src -f /etc/haproxy/whitelist.lst } + + +3. SPOP specification +---------------------- + +3.1. Data types +---------------- + +Here is the bytewise representation of typed data: + + TYPED-DATA : + +Supported types and their representation are: + + TYPE | ID | DESCRIPTION + -----------------------------+-----+---------------------------------- + NULL | 0 | NULL : <0> + Boolean | 1 | BOOL : <1+FLAG> + 32bits signed integer | 2 | INT32 : <2> + 32bits unsigned integer | 3 | UINT32 : <3> + 64bits signed integer | 4 | INT64 : <4> + 32bits unsigned integer | 5 | UNIT64 : <5> + IPV4 | 6 | IPV4 : <6> + IPV6 | 7 | IPV6 : <7> + String | 8 | STRING : <8> + Binary | 9 | BINARY : <9> + 10 -> 15 unused/reserved | - | - + -----------------------------+-----+---------------------------------- + +Variable-length integer (varint) are encoded using Peers encoding: + + + 0 <= X < 240 : 1 byte (7.875 bits) [ XXXX XXXX ] + 240 <= X < 2288 : 2 bytes (11 bits) [ 1111 XXXX ] [ 0XXX XXXX ] + 2288 <= X < 264432 : 3 bytes (18 bits) [ 1111 XXXX ] [ 1XXX XXXX ] [ 0XXX XXXX ] + 264432 <= X < 33818864 : 4 bytes (25 bits) [ 1111 XXXX ] [ 1XXX XXXX ]*2 [ 0XXX XXXX ] + 33818864 <= X < 4328786160 : 5 bytes (32 bits) [ 1111 XXXX ] [ 1XXX XXXX ]*3 [ 0XXX XXXX ] + ... + +For booleans, the value (true or false) is the first bit in the FLAGS +bitfield. if this bit is set to 0, then the boolean is evaluated as false, +otherwise, the boolean is evaluated as true. + +3.2. Frames +------------ + +Exchange between HAProxy and agents are made using FRAME packets. All frames +must be prefixed with their size encoded on 4 bytes in network byte order: + + + +A frame always starts with its type, on one byte, followed by metadata +containing flags, on 4 bytes and a two variable-length integer representing the +stream identifier and the frame identifier inside the stream: + + FRAME : + METADATA : + +Then comes the frame payload. Depending on the frame type, the payload can be +of three types: a simple key/value list, a list of messages or a list of +actions. + + FRAME-PAYLOAD : | | + + LIST-OF-MESSAGES : [ ... ] + MESSAGE-NAME : + + LIST-OF-ACTIONS : [ ... ] + ACTION-ARGS : [ ... ] + + KV-LIST : [ ... ] + KV-NAME : + KV-VALUE : + + FLAGS : + + Flags are a 32 bits field. They are encoded on 4 bytes in network byte + order, where the bit 0 is the LSB. + + 0 1 2-31 + +---+---+----------+ + | | A | | + | F | B | | + | I | O | RESERVED | + | N | R | | + | | T | | + +---+---+----------+ + + FIN: Indicates that this is the final payload fragment. The first fragment + may also be the final fragment. + + ABORT: Indicates that the processing of the current frame must be + cancelled. This bit should be set on frames with a fragmented + payload. It can be ignore for frames with an unfragemnted + payload. When it is set, the FIN bit must also be set. + + +Frames cannot exceed a maximum size negotiated between HAProxy and agents +during the HELLO handshake. Most of time, payload will be small enough to send +it in one frame. But when supported by the peer, it will be possible to +fragment huge payload on many frames. This ability is announced during the +HELLO handshake and it can be asynmetric (supported by agents but not by +HAProxy or the opposite). The following rules apply to fragmentation: + + * An unfragemnted payload consists of a single frame with the FIN bit set. + + * A fragemented payload consists of several frames with the FIN bit clear and + terminated by a single frame with the FIN bit set. All these frames must + share the same STREAM-ID and FRAME-ID. The first frame must set the right + FRAME-TYPE (e.g, NOTIFY). The following frames must have an unset type (0). + +Beside the support of fragmented payload by a peer, some payload must not be +fragmented. See below for details. + +IMPORTANT : The maximum size supported by peers for a frame must be greater +than or equal to 256 bytes. + +3.2.1. Frame capabilities +-------------------------- + +Here are the list of official capabilities that HAProxy and agents can support: + + * fragmentation: This is the ability for a peer to support fragmented + payload in received frames. This is an asymmectical + capability, it only concerns the peer that announces + it. This is the responsibility to the other peer to use it + or not. + + * pipelining: This is the ability for a peer to decouple NOTIFY and ACK + frames. This is a symmectical capability. To be used, it must + be supported by HAProxy and agents. Unlike HTTP pipelining, the + ACK frames can be send in any order, but always on the same TCP + connection used for the corresponding NOTIFY frame. + + * async: This ability is similar to the pipelining, but here any TCP + connection established between HAProxy and the agent can be used to + send ACK frames. if an agent accepts connections from multiple + HAProxy, it can use the "engine-id" value to group TCP + connections. See details about HAPROXY-HELLO frame. + +Unsupported or unknown capabilities are silently ignored, when possible. + +NOTE: HAProxy does not support the fragmentation for now. This means it is not + able to handle fragmented frames. However, if an agent announces the + fragmentation support, HAProxy may choose to send fragemented frames. + +3.2.2. Frame types overview +---------------------------- + +Here are types of frame supported by SPOE. Frames sent by HAProxy come first, +then frames sent by agents : + + TYPE | ID | DESCRIPTION + -----------------------------+-----+------------------------------------- + UNSET | 0 | Used for all frames but the first when a + | | payload is fragmented. + -----------------------------+-----+------------------------------------- + HAPROXY-HELLO | 1 | Sent by HAProxy when it opens a + | | connection on an agent. + | | + HAPROXY-DISCONNECT | 2 | Sent by HAProxy when it want to close + | | the connection or in reply to an + | | AGENT-DISCONNECT frame + | | + NOTIFY | 3 | Sent by HAProxy to pass information + | | to an agent + -----------------------------+-----+------------------------------------- + AGENT-HELLO | 101 | Reply to a HAPROXY-HELLO frame, when + | | the connection is established + | | + AGENT-DISCONNECT | 102 | Sent by an agent just before closing + | | the connection + | | + ACK | 103 | Sent to acknowledge a NOTIFY frame + -----------------------------+-----+------------------------------------- + +Unknown frames may be silently skipped. + +3.2.3. Workflow +---------------- + + * Successful HELLO handshake: + + HAPROXY AGENT SRV + | HAPROXY-HELLO | + | (healthcheck: false) | + | --------------------------> | + | | + | AGENT-HELLO | + | <-------------------------- | + | | + + * Successful HELLO healthcheck: + + HAPROXY AGENT SRV + | HAPROXY-HELLO | + | (healthcheck: true) | + | --------------------------> | + | | + | AGENT-HELLO + close() | + | <-------------------------- | + | | + + + * Error encountered by agent during the HELLO handshake: + + HAPROXY AGENT SRV + | HAPROXY-HELLO | + | --------------------------> | + | | + | DISCONNECT + close() | + | <-------------------------- | + | | + + * Error encountered by HAProxy during the HELLO handshake: + + HAPROXY AGENT SRV + | HAPROXY-HELLO | + | --------------------------> | + | | + | AGENT-HELLO | + | <-------------------------- | + | | + | DISCONNECT | + | --------------------------> | + | | + | DISCONNECT + close() | + | <-------------------------- | + | | + + * Notify / Ack exchange (unfragmented payload): + + HAPROXY AGENT SRV + | NOTIFY | + | --------------------------> | + | | + | ACK | + | <-------------------------- | + | | + + * Notify / Ack exchange (fragmented payload): + + HAPROXY AGENT SRV + | NOTIFY (frag 1) | + | --------------------------> | + | | + | UNSET (frag 2) | + | --------------------------> | + | ... | + | UNSET (frag N) | + | --------------------------> | + | | + | ACK | + | <-------------------------- | + | | + + * Aborted fragmentation of a NOTIFY frame: + + HAPROXY AGENT SRV + | ... | + | UNSET (frag X) | + | --------------------------> | + | | + | ACK/ABORT | + | <-------------------------- | + | | + | UNSET (frag X+1) | + | -----------X | + | | + | | + + * Connection closed by haproxy: + + HAPROXY AGENT SRV + | DISCONNECT | + | --------------------------> | + | | + | DISCONNECT + close() | + | <-------------------------- | + | | + + * Connection closed by agent: + + HAPROXY AGENT SRV + | DISCONNECT + close() | + | <-------------------------- | + | | + +3.2.4. Frame: HAPROXY-HELLO +---------------------------- + +This frame is the first one exchanged between HAProxy and an agent, when the +connection is established. The payload of this frame is a KV-LIST. It cannot be +fragmented. STREAM-ID and FRAME-ID are must be set 0. + +Following items are mandatory in the KV-LIST: + + * "supported-versions" + + Last SPOP major versions supported by HAProxy. It is a comma-separated list + of versions, following the format "Major.Minor". Spaces must be ignored, if + any. When a major version is announced by HAProxy, it means it also support + all previous minor versions. + + Example: "2.0, 1.5" means HAProxy supports SPOP 2.0 and 1.0 to 1.5 + + * "max-frame-size" + + This is the maximum size allowed for a frame. The HAPROXY-HELLO frame must + be lower or equal to this value. + + * "capabilities" + + This a comma-separated list of capabilities supported by HAProxy. Spaces + must be ignored, if any. + +Following optional items can be added in the KV-LIST: + + * "healthcheck" + + If this item is set to TRUE, then the HAPROXY-HELLO frame is sent during a + SPOE health check. When set to FALSE, this item can be ignored. + + * "engine-id" + + This is a uniq string that identify a SPOE engine. + +To finish the HELLO handshake, the agent must return an AGENT-HELLO frame with +its supported SPOP version, the lower value between its maximum size allowed +for a frame and the HAProxy one and capabilities it supports. If an error +occurs or if an incompatibility is detected with the agent configuration, an +AGENT-DISCONNECT frame must be returned. + +3.2.5. Frame: AGENT-HELLO +-------------------------- + +This frame is sent in reply to a HAPROXY-HELLO frame to finish a HELLO +handshake. As for HAPROXY-HELLO frame, STREAM-ID and FRAME-ID are also set +0. The payload of this frame is a KV-LIST and it cannot be fragmented. + +Following items are mandatory in the KV-LIST: + + * "version" + + This is the SPOP version the agent supports. It must follow the format + "Major.Minor" and it must be lower or equal than one of major versions + announced by HAProxy. + + * "max-frame-size" + + This is the maximum size allowed for a frame. It must be lower or equal to + the value in the HAPROXY-HELLO frame. This value will be used for all + subsequent frames. + + * "capabilities" + + This a comma-separated list of capabilities supported by agent. Spaces must + be ignored, if any. + +At this time, if everything is ok for HAProxy (supported version and valid +max-frame-size value), the HELLO handshake is successfully completed. Else, +HAProxy sends a HAPROXY-DISCONNECT frame with the corresponding error. + +If "healthcheck" item was set to TRUE in the HAPROXY-HELLO frame, the agent can +safely close the connection without DISCONNECT frame. In all cases, HAProxy +will close the connection at the end of the health check. + +3.2.6. Frame: NOTIFY +--------------------- + +Information are sent to the agents inside NOTIFY frames. These frames are +attached to a stream, so STREAM-ID and FRAME-ID must be set. The payload of +NOTIFY frames is a LIST-OF-MESSAGES and, if supported by agents, it can be +fragmented. + +NOTIFY frames must be acknowledge by agents sending an ACK frame, repeating +right STREAM-ID and FRAME-ID. + +3.2.7. Frame: ACK +------------------ + +ACK frames must be sent by agents to reply to NOTIFY frames. STREAM-ID and +FRAME-ID found in a NOTIFY frame must be reuse in the corresponding ACK +frame. The payload of ACK frames is a LIST-OF-ACTIONS and, if supported by +HAProxy, it can be fragmented. + +3.2.8. Frame: HAPROXY-DISCONNECT +--------------------------------- + +If an error occurs, at anytime, from the HAProxy side, a HAPROXY-DISCONNECT +frame is sent with information describing the error. HAProxy will wait an +AGENT-DISCONNECT frame in reply. All other frames will be ignored. The agent +must then close the socket. + +The payload of this frame is a KV-LIST. It cannot be fragmented. STREAM-ID and +FRAME-ID are must be set 0. + +Following items are mandatory in the KV-LIST: + + * "status-code" + + This is the code corresponding to the error. + + * "message" + + This is a textual message describing the error. + +For more information about known errors, see section "Errors & timeouts" + +3.2.9. Frame: AGENT-DISCONNECT +------------------------------- + +If an error occurs, at anytime, from the agent size, a AGENT-DISCONNECT frame +is sent, with information describing the error. such frame is also sent in reply +to a HAPROXY-DISCONNECT. The agent must close the socket just after sending +this frame. + +The payload of this frame is a KV-LIST. It cannot be fragmented. STREAM-ID and +FRAME-ID are must be set 0. + +Following items are mandatory in the KV-LIST: + + * "status-code" + + This is the code corresponding to the error. + + * "message" + + This is a textual message describing the error. + +For more information about known errors, see section "Errors & timeouts" + +3.3. Events & Messages +----------------------- + +Information about streams are sent in NOTIFY frames. You can specify which kind +of information to send by defining "spoe-message" sections in your SPOE +configuration file. for each "spoe-message" there will be a message in a NOTIFY +frame when the right event is triggered. + +A NOTIFY frame is sent for an specific event when there is at least one +"spoe-message" attached to this event. All messages for an event will be added +in the same NOTIFY frame. + +Here is the list of supported events: + + * on-client-session is triggered when a new client session is created. + This event is only available for SPOE filters + declared in a frontend or a listen section. + + * on-frontend-tcp-request is triggered just before the evaluation of + "tcp-request content" rules on the frontend side. + This event is only available for SPOE filters + declared in a frontend or a listen section. + + * on-backend-tcp-request is triggered just before the evaluation of + "tcp-request content" rules on the backend side. + This event is skipped for SPOE filters declared + in a listen section. + + * on-frontend-http-request is triggered just before the evaluation of + "http-request" rules on the frontend side. This + event is only available for SPOE filters declared + in a frontend or a listen section. + + * on-backend-http-request is triggered just before the evaluation of + "http-request" rules on the backend side. This + event is skipped for SPOE filters declared in a + listen section. + + * on-server-session is triggered when the session with the server is + established. + + * on-tcp-response is triggered just before the evaluation of + "tcp-response content" rules. + + * on-http-response is triggered just before the evaluation of + "http-response" rules. + + +The stream processing will loop on these events, when triggered, waiting the +agent reply. + +3.4. Actions +------------- + +An agent must acknowledge each NOTIFY frame by sending the corresponding ACK +frame. Actions can be added in these frames to dynamically take action on the +processing of a stream. + +Here is the list of supported actions: + + * set-var set the value for an existing variable. 3 arguments must be + attached to this action: the variable scope (proc, sess, txn, + req or res), the variable name (a string) and its value. + + ACTION-SET-VAR : + + SET-VAR : <1> + NB-ARGS : <3> + VAR-SCOPE : | | | | + VAR-NAME : + VAR-VALUE : + + PROCESS : <0> + SESSION : <1> + TRANSACTION : <2> + REQUEST : <3> + RESPONSE : <4> + + * unset-var unset the value for an existing variable. 2 arguments must be + attached to this action: the variable scope (proc, sess, txn, + req or res) and the variable name (a string). + + ACTION-UNSET-VAR : + + UNSET-VAR : <2> + NB-ARGS : <2> + VAR-SCOPE : | | | | + VAR-NAME : + + PROCESS : <0> + SESSION : <1> + TRANSACTION : <2> + REQUEST : <3> + RESPONSE : <4> + + +NOTE: Name of the variables will be automatically prefixed by HAProxy to avoid + name clashes with other variables used in HAProxy. Moreover, unknown + variable will be silently ignored. + +3.5. Errors & timeouts +---------------------- + +Here is the list of all known errors: + + STATUS CODE | DESCRIPTION + ----------------+-------------------------------------------------------- + 0 | normal (no error occurred) + 1 | I/O error + 2 | A timeout occurred + 3 | frame is too big + 4 | invalid frame received + 5 | version value not found + 6 | max-frame-size value not found + 7 | capabilities value not found + 8 | unsupported version + 9 | max-frame-size too big or too small + 10 | payload fragmentation is not supported + 11 | invalid interlaced frames + 12 | frame-id not found (it does not match any referenced frame) + 13 | resource allocation error + 99 | an unknown error occurrde + ----------------+-------------------------------------------------------- + +An agent can define its own errors using a not yet assigned status code. + +IMPORTANT NOTE: By default, for a specific stream, when an abnormal/unexpected + error occurs, the SPOE is disabled for all the transaction. So + if you have several events configured, such error on an event + will disabled all following. For TCP streams, this will + disable the SPOE for the whole session. For HTTP streams, this + will disable it for the transaction (request and response). + See 'option continue-on-error' to bypass this limitation. + +To avoid a stream to wait undefinetly, you must carefully choose the +acknowledgement timeout. In most of cases, it will be quiet low. But it depends +on the responsivness of your service. + +You must also choose idle timeout carefully. Because connection with your +service depends on the backend configuration used by the SPOA, it is important +to use a lower value for idle timeout than the server timeout. Else the +connection will be closed by HAProxy. The same is true for hello timeout. You +should choose a lower value than the connect timeout. + +4. Logging +----------- + +Activity of an SPOE is logged using HAProxy's logger. The messages are logged +in the context of the streams that handle the client and the server +connections. A message is emitted for each event or group handled by an +SPOE. Depending on the status code, the log level will be different. In the +normal case, when no error occurred, the message is logged with the level +LOG_NOTICE. Otherwise, the message is logged with the level LOG_WARNING. + +The messages are logged using the agent's logger, if defined, and use the +following format: + + SPOE: [AGENT] sid=STREAM-ID st=STATUS-CODE reqT/qT/wT/resT/pT \ + / / / + + AGENT is the agent name + TYPE is EVENT of GROUP + NAME is the event or the group name + STREAM-ID is an integer, the unique id of the stream + STATUS_CODE is the processing's status code + reqT/qT/wT/resT/pT are the following time events: + + * reqT : the encoding time. It includes ACLs processing, if any. For + fragmented frames, it is the sum of all fragments. + * qT : the delay before the request gets out the sending queue. For + fragmented frames, it is the sum of all fragments. + * wT : the delay before the response is received. No fragmentation + supported here. + * resT : the delay to process the response. No fragmentation supported + here. + * pT : the delay to process the event or the group. From the stream + point of view, it is the latency added by the SPOE processing. + It is more or less the sum of values above. + + is the numbers of idle SPOE applets + is the numbers of SPOE applets + is the numbers of streams waiting to send data + is the numbers of streams waiting for a ack + is the numbers of processing errors + is the numbers of events/groups processed + + +For all these time events, -1 means the processing was interrupted before the +end. So -1 for the queue time means the request was never dequeued. For +fragmented frames it is harder to know when the interruption happened. + +/* + * Local variables: + * fill-column: 79 + * End: + */ -- cgit v1.2.3