From da76459dc21b5af2449af2d36eb95226cb186ce2 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 28 Apr 2024 11:35:11 +0200 Subject: Adding upstream version 2.6.12. Signed-off-by: Daniel Baumann --- doc/proxy-protocol.txt | 1051 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 1051 insertions(+) create mode 100644 doc/proxy-protocol.txt (limited to 'doc/proxy-protocol.txt') diff --git a/doc/proxy-protocol.txt b/doc/proxy-protocol.txt new file mode 100644 index 0000000..fac0331 --- /dev/null +++ b/doc/proxy-protocol.txt @@ -0,0 +1,1051 @@ +2020/03/05 Willy Tarreau + HAProxy Technologies + The PROXY protocol + Versions 1 & 2 + +Abstract + + The PROXY protocol provides a convenient way to safely transport connection + information such as a client's address across multiple layers of NAT or TCP + proxies. It is designed to require little changes to existing components and + to limit the performance impact caused by the processing of the transported + information. + + +Revision history + + 2010/10/29 - first version + 2011/03/20 - update: implementation and security considerations + 2012/06/21 - add support for binary format + 2012/11/19 - final review and fixes + 2014/05/18 - modify and extend PROXY protocol version 2 + 2014/06/11 - fix example code to consider ver+cmd merge + 2014/06/14 - fix v2 header check in example code, and update Forwarded spec + 2014/07/12 - update list of implementations (add Squid) + 2015/05/02 - update list of implementations and format of the TLV add-ons + 2017/03/10 - added the checksum, noop and more SSL-related TLV types, + reserved TLV type ranges, added TLV documentation, clarified + string encoding. With contributions from Andriy Palamarchuk + (Amazon.com). + 2020/03/05 - added the unique ID TLV type (Tim Düsterhus) + + +1. Background + +Relaying TCP connections through proxies generally involves a loss of the +original TCP connection parameters such as source and destination addresses, +ports, and so on. Some protocols make it a little bit easier to transfer such +information. For SMTP, Postfix authors have proposed the XCLIENT protocol [1] +which received broad adoption and is particularly suited to mail exchanges. +For HTTP, there is the "Forwarded" extension [2], which aims at replacing the +omnipresent "X-Forwarded-For" header which carries information about the +original source address, and the less common X-Original-To which carries +information about the destination address. + +However, both mechanisms require a knowledge of the underlying protocol to be +implemented in intermediaries. + +Then comes a new class of products which we'll call "dumb proxies", not because +they don't do anything, but because they're processing protocol-agnostic data. +Both Stunnel[3] and Stud[4] are examples of such "dumb proxies". They talk raw +TCP on one side, and raw SSL on the other one, and do that reliably, without +any knowledge of what protocol is transported on top of the connection. HAProxy +running in pure TCP mode obviously falls into that category as well. + +The problem with such a proxy when it is combined with another one such as +haproxy, is to adapt it to talk the higher level protocol. A patch is available +for Stunnel to make it capable of inserting an X-Forwarded-For header in the +first HTTP request of each incoming connection. HAProxy is able not to add +another one when the connection comes from Stunnel, so that it's possible to +hide it from the servers. + +The typical architecture becomes the following one : + + + +--------+ HTTP :80 +----------+ + | client | --------------------------------> | | + | | | haproxy, | + +--------+ +---------+ | 1 or 2 | + / / HTTPS | stunnel | HTTP :81 | listening| + <________/ ---------> | (server | ---------> | ports | + | mode) | | | + +---------+ +----------+ + + +The problem appears when haproxy runs with keep-alive on the side towards the +client. The Stunnel patch will only add the X-Forwarded-For header to the first +request of each connection and all subsequent requests will not have it. One +solution could be to improve the patch to make it support keep-alive and parse +all forwarded data, whether they're announced with a Content-Length or with a +Transfer-Encoding, taking care of special methods such as HEAD which announce +data without transferring them, etc... In fact, it would require implementing a +full HTTP stack in Stunnel. It would then become a lot more complex, a lot less +reliable and would not anymore be the "dumb proxy" that fits every purposes. + +In practice, we don't need to add a header for each request because we'll emit +the exact same information every time : the information related to the client +side connection. We could then cache that information in haproxy and use it for +every other request. But that becomes dangerous and is still limited to HTTP +only. + +Another approach consists in prepending each connection with a header reporting +the characteristics of the other side's connection. This method is simpler to +implement, does not require any protocol-specific knowledge on either side, and +completely fits the purpose since what is desired precisely is to know the +other side's connection endpoints. It is easy to perform for the sender (just +send a short header once the connection is established) and to parse for the +receiver (simply perform one read() on the incoming connection to fill in +addresses after an accept). The protocol used to carry connection information +across proxies was thus called the PROXY protocol. + + +2. The PROXY protocol header + +This document uses a few terms that are worth explaining here : + - "connection initiator" is the party requesting a new connection + - "connection target" is the party accepting a connection request + - "client" is the party for which a connection was requested + - "server" is the party to which the client desired to connect + - "proxy" is the party intercepting and relaying the connection + from the client to the server. + - "sender" is the party sending data over a connection. + - "receiver" is the party receiving data from the sender. + - "header" or "PROXY protocol header" is the block of connection information + the connection initiator prepends at the beginning of a connection, which + makes it the sender from the protocol point of view. + +The PROXY protocol's goal is to fill the server's internal structures with the +information collected by the proxy that the server would have been able to get +by itself if the client was connecting directly to the server instead of via a +proxy. The information carried by the protocol are the ones the server would +get using getsockname() and getpeername() : + - address family (AF_INET for IPv4, AF_INET6 for IPv6, AF_UNIX) + - socket protocol (SOCK_STREAM for TCP, SOCK_DGRAM for UDP) + - layer 3 source and destination addresses + - layer 4 source and destination ports if any + +Unlike the XCLIENT protocol, the PROXY protocol was designed with limited +extensibility in order to help the receiver parse it very fast. Version 1 was +focused on keeping it human-readable for better debugging possibilities, which +is always desirable for early adoption when few implementations exist. Version +2 adds support for a binary encoding of the header which is much more efficient +to produce and to parse, especially when dealing with IPv6 addresses that are +expensive to emit in ASCII form and to parse. + +In both cases, the protocol simply consists in an easily parsable header placed +by the connection initiator at the beginning of each connection. The protocol +is intentionally stateless in that it does not expect the sender to wait for +the receiver before sending the header, nor the receiver to send anything back. + +This specification supports two header formats, a human-readable format which +is the only format supported in version 1 of the protocol, and a binary format +which is only supported in version 2. Both formats were designed to ensure that +the header cannot be confused with common higher level protocols such as HTTP, +SSL/TLS, FTP or SMTP, and that both formats are easily distinguishable one from +each other for the receiver. + +Version 1 senders MAY only produce the human-readable header format. Version 2 +senders MAY only produce the binary header format. Version 1 receivers MUST at +least implement the human-readable header format. Version 2 receivers MUST at +least implement the binary header format, and it is recommended that they also +implement the human-readable header format for better interoperability and ease +of upgrade when facing version 1 senders. + +Both formats are designed to fit in the smallest TCP segment that any TCP/IP +host is required to support (576 - 40 = 536 bytes). This ensures that the whole +header will always be delivered at once when the socket buffers are still empty +at the beginning of a connection. The sender must always ensure that the header +is sent at once, so that the transport layer maintains atomicity along the path +to the receiver. The receiver may be tolerant to partial headers or may simply +drop the connection when receiving a partial header. Recommendation is to be +tolerant, but implementation constraints may not always easily permit this. It +is important to note that nothing forces any intermediary to forward the whole +header at once, because TCP is a streaming protocol which may be processed one +byte at a time if desired, causing the header to be fragmented when reaching +the receiver. But due to the places where such a protocol is used, the above +simplification generally is acceptable because the risk of crossing such a +device handling one byte at a time is close to zero. + +The receiver MUST NOT start processing the connection before it receives a +complete and valid PROXY protocol header. This is particularly important for +protocols where the receiver is expected to speak first (eg: SMTP, FTP or SSH). +The receiver may apply a short timeout and decide to abort the connection if +the protocol header is not seen within a few seconds (at least 3 seconds to +cover a TCP retransmit). + +The receiver MUST be configured to only receive the protocol described in this +specification and MUST not try to guess whether the protocol header is present +or not. This means that the protocol explicitly prevents port sharing between +public and private access. Otherwise it would open a major security breach by +allowing untrusted parties to spoof their connection addresses. The receiver +SHOULD ensure proper access filtering so that only trusted proxies are allowed +to use this protocol. + +Some proxies are smart enough to understand transported protocols and to reuse +idle server connections for multiple messages. This typically happens in HTTP +where requests from multiple clients may be sent over the same connection. Such +proxies MUST NOT implement this protocol on multiplexed connections because the +receiver would use the address advertised in the PROXY header as the address of +all forwarded requests's senders. In fact, such proxies are not dumb proxies, +and since they do have a complete understanding of the transported protocol, +they MUST use the facilities provided by this protocol to present the client's +address. + + +2.1. Human-readable header format (Version 1) + +This is the format specified in version 1 of the protocol. It consists in one +line of US-ASCII text matching exactly the following block, sent immediately +and at once upon the connection establishment and prepended before any data +flowing from the sender to the receiver : + + - a string identifying the protocol : "PROXY" ( \x50 \x52 \x4F \x58 \x59 ) + Seeing this string indicates that this is version 1 of the protocol. + + - exactly one space : " " ( \x20 ) + + - a string indicating the proxied INET protocol and family. As of version 1, + only "TCP4" ( \x54 \x43 \x50 \x34 ) for TCP over IPv4, and "TCP6" + ( \x54 \x43 \x50 \x36 ) for TCP over IPv6 are allowed. Other, unsupported, + or unknown protocols must be reported with the name "UNKNOWN" ( \x55 \x4E + \x4B \x4E \x4F \x57 \x4E ). For "UNKNOWN", the rest of the line before the + CRLF may be omitted by the sender, and the receiver must ignore anything + presented before the CRLF is found. Note that an earlier version of this + specification suggested to use this when sending health checks, but this + causes issues with servers that reject the "UNKNOWN" keyword. Thus is it + now recommended not to send "UNKNOWN" when the connection is expected to + be accepted, but only when it is not possible to correctly fill the PROXY + line. + + - exactly one space : " " ( \x20 ) + + - the layer 3 source address in its canonical format. IPv4 addresses must be + indicated as a series of exactly 4 integers in the range [0..255] inclusive + written in decimal representation separated by exactly one dot between each + other. Heading zeroes are not permitted in front of numbers in order to + avoid any possible confusion with octal numbers. IPv6 addresses must be + indicated as series of sets of 4 hexadecimal digits (upper or lower case) + delimited by colons between each other, with the acceptance of one double + colon sequence to replace the largest acceptable range of consecutive + zeroes. The total number of decoded bits must exactly be 128. The + advertised protocol family dictates what format to use. + + - exactly one space : " " ( \x20 ) + + - the layer 3 destination address in its canonical format. It is the same + format as the layer 3 source address and matches the same family. + + - exactly one space : " " ( \x20 ) + + - the TCP source port represented as a decimal integer in the range + [0..65535] inclusive. Heading zeroes are not permitted in front of numbers + in order to avoid any possible confusion with octal numbers. + + - exactly one space : " " ( \x20 ) + + - the TCP destination port represented as a decimal integer in the range + [0..65535] inclusive. Heading zeroes are not permitted in front of numbers + in order to avoid any possible confusion with octal numbers. + + - the CRLF sequence ( \x0D \x0A ) + + +The maximum line lengths the receiver must support including the CRLF are : + - TCP/IPv4 : + "PROXY TCP4 255.255.255.255 255.255.255.255 65535 65535\r\n" + => 5 + 1 + 4 + 1 + 15 + 1 + 15 + 1 + 5 + 1 + 5 + 2 = 56 chars + + - TCP/IPv6 : + "PROXY TCP6 ffff:f...f:ffff ffff:f...f:ffff 65535 65535\r\n" + => 5 + 1 + 4 + 1 + 39 + 1 + 39 + 1 + 5 + 1 + 5 + 2 = 104 chars + + - unknown connection (short form) : + "PROXY UNKNOWN\r\n" + => 5 + 1 + 7 + 2 = 15 chars + + - worst case (optional fields set to 0xff) : + "PROXY UNKNOWN ffff:f...f:ffff ffff:f...f:ffff 65535 65535\r\n" + => 5 + 1 + 7 + 1 + 39 + 1 + 39 + 1 + 5 + 1 + 5 + 2 = 107 chars + +So a 108-byte buffer is always enough to store all the line and a trailing zero +for string processing. + +The receiver must wait for the CRLF sequence before starting to decode the +addresses in order to ensure they are complete and properly parsed. If the CRLF +sequence is not found in the first 107 characters, the receiver should declare +the line invalid. A receiver may reject an incomplete line which does not +contain the CRLF sequence in the first atomic read operation. The receiver must +not tolerate a single CR or LF character to end the line when a complete CRLF +sequence is expected. + +Any sequence which does not exactly match the protocol must be discarded and +cause the receiver to abort the connection. It is recommended to abort the +connection as soon as possible so that the sender gets a chance to notice the +anomaly and log it. + +If the announced transport protocol is "UNKNOWN", then the receiver knows that +the sender speaks the correct PROXY protocol with the appropriate version, and +SHOULD accept the connection and use the real connection's parameters as if +there were no PROXY protocol header on the wire. However, senders SHOULD not +use the "UNKNOWN" protocol when they are the initiators of outgoing connections +because some receivers may reject them. When a load balancing proxy has to send +health checks to a server, it SHOULD build a valid PROXY line which it will +fill with a getsockname()/getpeername() pair indicating the addresses used. It +is important to understand that doing so is not appropriate when some source +address translation is performed between the sender and the receiver. + +An example of such a line before an HTTP request would look like this (CR +marked as "\r" and LF marked as "\n") : + + PROXY TCP4 192.168.0.1 192.168.0.11 56324 443\r\n + GET / HTTP/1.1\r\n + Host: 192.168.0.11\r\n + \r\n + +For the sender, the header line is easy to put into the output buffers once the +connection is established. Note that since the line is always shorter than an +MSS, the sender is guaranteed to always be able to emit it at once and should +not even bother handling partial sends. For the receiver, once the header is +parsed, it is easy to skip it from the input buffers. Please consult section 9 +for implementation suggestions. + + +2.2. Binary header format (version 2) + +Producing human-readable IPv6 addresses and parsing them is very inefficient, +due to the multiple possible representation formats and the handling of compact +address format. It was also not possible to specify address families outside +IPv4/IPv6 nor non-TCP protocols. Another drawback of the human-readable format +is the fact that implementations need to parse all characters to find the +trailing CRLF, which makes it harder to read only the exact bytes count. Last, +the UNKNOWN address type has not always been accepted by servers as a valid +protocol because of its imprecise meaning. + +Version 2 of the protocol thus introduces a new binary format which remains +distinguishable from version 1 and from other commonly used protocols. It was +specially designed in order to be incompatible with a wide range of protocols +and to be rejected by a number of common implementations of these protocols +when unexpectedly presented (please see section 7). Also for better processing +efficiency, IPv4 and IPv6 addresses are respectively aligned on 4 and 16 bytes +boundaries. + +The binary header format starts with a constant 12 bytes block containing the +protocol signature : + + \x0D \x0A \x0D \x0A \x00 \x0D \x0A \x51 \x55 \x49 \x54 \x0A + +Note that this block contains a null byte at the 5th position, so it must not +be handled as a null-terminated string. + +The next byte (the 13th one) is the protocol version and command. + +The highest four bits contains the version. As of this specification, it must +always be sent as \x2 and the receiver must only accept this value. + +The lowest four bits represents the command : + - \x0 : LOCAL : the connection was established on purpose by the proxy + without being relayed. The connection endpoints are the sender and the + receiver. Such connections exist when the proxy sends health-checks to the + server. The receiver must accept this connection as valid and must use the + real connection endpoints and discard the protocol block including the + family which is ignored. + + - \x1 : PROXY : the connection was established on behalf of another node, + and reflects the original connection endpoints. The receiver must then use + the information provided in the protocol block to get original the address. + + - other values are unassigned and must not be emitted by senders. Receivers + must drop connections presenting unexpected values here. + +The 14th byte contains the transport protocol and address family. The highest 4 +bits contain the address family, the lowest 4 bits contain the protocol. + +The address family maps to the original socket family without necessarily +matching the values internally used by the system. It may be one of : + + - 0x0 : AF_UNSPEC : the connection is forwarded for an unknown, unspecified + or unsupported protocol. The sender should use this family when sending + LOCAL commands or when dealing with unsupported protocol families. The + receiver is free to accept the connection anyway and use the real endpoint + addresses or to reject it. The receiver should ignore address information. + + - 0x1 : AF_INET : the forwarded connection uses the AF_INET address family + (IPv4). The addresses are exactly 4 bytes each in network byte order, + followed by transport protocol information (typically ports). + + - 0x2 : AF_INET6 : the forwarded connection uses the AF_INET6 address family + (IPv6). The addresses are exactly 16 bytes each in network byte order, + followed by transport protocol information (typically ports). + + - 0x3 : AF_UNIX : the forwarded connection uses the AF_UNIX address family + (UNIX). The addresses are exactly 108 bytes each. + + - other values are unspecified and must not be emitted in version 2 of this + protocol and must be rejected as invalid by receivers. + +The transport protocol is specified in the lowest 4 bits of the 14th byte : + + - 0x0 : UNSPEC : the connection is forwarded for an unknown, unspecified + or unsupported protocol. The sender should use this family when sending + LOCAL commands or when dealing with unsupported protocol families. The + receiver is free to accept the connection anyway and use the real endpoint + addresses or to reject it. The receiver should ignore address information. + + - 0x1 : STREAM : the forwarded connection uses a SOCK_STREAM protocol (eg: + TCP or UNIX_STREAM). When used with AF_INET/AF_INET6 (TCP), the addresses + are followed by the source and destination ports represented on 2 bytes + each in network byte order. + + - 0x2 : DGRAM : the forwarded connection uses a SOCK_DGRAM protocol (eg: + UDP or UNIX_DGRAM). When used with AF_INET/AF_INET6 (UDP), the addresses + are followed by the source and destination ports represented on 2 bytes + each in network byte order. + + - other values are unspecified and must not be emitted in version 2 of this + protocol and must be rejected as invalid by receivers. + +In practice, the following protocol bytes are expected : + + - \x00 : UNSPEC : the connection is forwarded for an unknown, unspecified + or unsupported protocol. The sender should use this family when sending + LOCAL commands or when dealing with unsupported protocol families. When + used with a LOCAL command, the receiver must accept the connection and + ignore any address information. For other commands, the receiver is free + to accept the connection anyway and use the real endpoints addresses or to + reject the connection. The receiver should ignore address information. + + - \x11 : TCP over IPv4 : the forwarded connection uses TCP over the AF_INET + protocol family. Address length is 2*4 + 2*2 = 12 bytes. + + - \x12 : UDP over IPv4 : the forwarded connection uses UDP over the AF_INET + protocol family. Address length is 2*4 + 2*2 = 12 bytes. + + - \x21 : TCP over IPv6 : the forwarded connection uses TCP over the AF_INET6 + protocol family. Address length is 2*16 + 2*2 = 36 bytes. + + - \x22 : UDP over IPv6 : the forwarded connection uses UDP over the AF_INET6 + protocol family. Address length is 2*16 + 2*2 = 36 bytes. + + - \x31 : UNIX stream : the forwarded connection uses SOCK_STREAM over the + AF_UNIX protocol family. Address length is 2*108 = 216 bytes. + + - \x32 : UNIX datagram : the forwarded connection uses SOCK_DGRAM over the + AF_UNIX protocol family. Address length is 2*108 = 216 bytes. + + +Only the UNSPEC protocol byte (\x00) is mandatory to implement on the receiver. +A receiver is not required to implement other ones, provided that it +automatically falls back to the UNSPEC mode for the valid combinations above +that it does not support. + +The 15th and 16th bytes is the address length in bytes in network endian order. +It is used so that the receiver knows how many address bytes to skip even when +it does not implement the presented protocol. Thus the length of the protocol +header in bytes is always exactly 16 + this value. When a sender presents a +LOCAL connection, it should not present any address so it sets this field to +zero. Receivers MUST always consider this field to skip the appropriate number +of bytes and must not assume zero is presented for LOCAL connections. When a +receiver accepts an incoming connection showing an UNSPEC address family or +protocol, it may or may not decide to log the address information if present. + +So the 16-byte version 2 header can be described this way : + + struct proxy_hdr_v2 { + uint8_t sig[12]; /* hex 0D 0A 0D 0A 00 0D 0A 51 55 49 54 0A */ + uint8_t ver_cmd; /* protocol version and command */ + uint8_t fam; /* protocol family and address */ + uint16_t len; /* number of following bytes part of the header */ + }; + +Starting from the 17th byte, addresses are presented in network byte order. +The address order is always the same : + - source layer 3 address in network byte order + - destination layer 3 address in network byte order + - source layer 4 address if any, in network byte order (port) + - destination layer 4 address if any, in network byte order (port) + +The address block may directly be sent from or received into the following +union which makes it easy to cast from/to the relevant socket native structs +depending on the address type : + + union proxy_addr { + struct { /* for TCP/UDP over IPv4, len = 12 */ + uint32_t src_addr; + uint32_t dst_addr; + uint16_t src_port; + uint16_t dst_port; + } ipv4_addr; + struct { /* for TCP/UDP over IPv6, len = 36 */ + uint8_t src_addr[16]; + uint8_t dst_addr[16]; + uint16_t src_port; + uint16_t dst_port; + } ipv6_addr; + struct { /* for AF_UNIX sockets, len = 216 */ + uint8_t src_addr[108]; + uint8_t dst_addr[108]; + } unix_addr; + }; + +The sender must ensure that all the protocol header is sent at once. This block +is always smaller than an MSS, so there is no reason for it to be segmented at +the beginning of the connection. The receiver should also process the header +at once. The receiver must not start to parse an address before the whole +address block is received. The receiver must also reject incoming connections +containing partial protocol headers. + +A receiver may be configured to support both version 1 and version 2 of the +protocol. Identifying the protocol version is easy : + + - if the incoming byte count is 16 or above and the 13 first bytes match + the protocol signature block followed by the protocol version 2 : + + \x0D\x0A\x0D\x0A\x00\x0D\x0A\x51\x55\x49\x54\x0A\x20 + + - otherwise, if the incoming byte count is 8 or above, and the 5 first + characters match the US-ASCII representation of "PROXY" then the protocol + must be parsed as version 1 : + + \x50\x52\x4F\x58\x59 + + - otherwise the protocol is not covered by this specification and the + connection must be dropped. + +If the length specified in the PROXY protocol header indicates that additional +bytes are part of the header beyond the address information, a receiver may +choose to skip over and ignore those bytes, or attempt to interpret those +bytes. + +The information in those bytes will be arranged in Type-Length-Value (TLV +vectors) in the following format. The first byte is the Type of the vector. +The second two bytes represent the length in bytes of the value (not included +the Type and Length bytes), and following the length field is the number of +bytes specified by the length. + + struct pp2_tlv { + uint8_t type; + uint8_t length_hi; + uint8_t length_lo; + uint8_t value[0]; + }; + +A receiver may choose to skip over and ignore the TLVs it is not interested in +or it does not understand. Senders can generate the TLVs only for +the information they choose to publish. + +The following types have already been registered for the field : + + #define PP2_TYPE_ALPN 0x01 + #define PP2_TYPE_AUTHORITY 0x02 + #define PP2_TYPE_CRC32C 0x03 + #define PP2_TYPE_NOOP 0x04 + #define PP2_TYPE_UNIQUE_ID 0x05 + #define PP2_TYPE_SSL 0x20 + #define PP2_SUBTYPE_SSL_VERSION 0x21 + #define PP2_SUBTYPE_SSL_CN 0x22 + #define PP2_SUBTYPE_SSL_CIPHER 0x23 + #define PP2_SUBTYPE_SSL_SIG_ALG 0x24 + #define PP2_SUBTYPE_SSL_KEY_ALG 0x25 + #define PP2_TYPE_NETNS 0x30 + + +2.2.1 PP2_TYPE_ALPN + +Application-Layer Protocol Negotiation (ALPN). It is a byte sequence defining +the upper layer protocol in use over the connection. The most common use case +will be to pass the exact copy of the ALPN extension of the Transport Layer +Security (TLS) protocol as defined by RFC7301 [9]. + + +2.2.2 PP2_TYPE_AUTHORITY + +Contains the host name value passed by the client, as an UTF8-encoded string. +In case of TLS being used on the client connection, this is the exact copy of +the "server_name" extension as defined by RFC3546 [10], section 3.1, often +referred to as "SNI". There are probably other situations where an authority +can be mentioned on a connection without TLS being involved at all. + + +2.2.3. PP2_TYPE_CRC32C + +The value of the type PP2_TYPE_CRC32C is a 32-bit number storing the CRC32c +checksum of the PROXY protocol header. + +When the checksum is supported by the sender after constructing the header +the sender MUST: + + - initialize the checksum field to '0's. + + - calculate the CRC32c checksum of the PROXY header as described in RFC4960, + Appendix B [8]. + + - put the resultant value into the checksum field, and leave the rest of + the bits unchanged. + +If the checksum is provided as part of the PROXY header and the checksum +functionality is supported by the receiver, the receiver MUST: + + - store the received CRC32c checksum value aside. + + - replace the 32 bits of the checksum field in the received PROXY header with + all '0's and calculate a CRC32c checksum value of the whole PROXY header. + + - verify that the calculated CRC32c checksum is the same as the received + CRC32c checksum. If it is not, the receiver MUST treat the TCP connection + providing the header as invalid. + +The default procedure for handling an invalid TCP connection is to abort it. + + +2.2.4. PP2_TYPE_NOOP + +The TLV of this type should be ignored when parsed. The value is zero or more +bytes. Can be used for data padding or alignment. Note that it can be used +to align only by 3 or more bytes because a TLV can not be smaller than that. + + +2.2.5. PP2_TYPE_UNIQUE_ID + +The value of the type PP2_TYPE_UNIQUE_ID is an opaque byte sequence of up to +128 bytes generated by the upstream proxy that uniquely identifies the +connection. + +The unique ID can be used to easily correlate connections across multiple +layers of proxies, without needing to look up IP addresses and port numbers. + + +2.2.6. The PP2_TYPE_SSL type and subtypes + +For the type PP2_TYPE_SSL, the value is itself a defined like this : + + struct pp2_tlv_ssl { + uint8_t client; + uint32_t verify; + struct pp2_tlv sub_tlv[0]; + }; + +The field will be zero if the client presented a certificate +and it was successfully verified, and non-zero otherwise. + +The field is made of a bit field from the following values, +indicating which element is present : + + #define PP2_CLIENT_SSL 0x01 + #define PP2_CLIENT_CERT_CONN 0x02 + #define PP2_CLIENT_CERT_SESS 0x04 + +Note, that each of these elements may lead to extra data being appended to +this TLV using a second level of TLV encapsulation. It is thus possible to +find multiple TLV values after this field. The total length of the pp2_tlv_ssl +TLV will reflect this. + +The PP2_CLIENT_SSL flag indicates that the client connected over SSL/TLS. When +this field is present, the US-ASCII string representation of the TLS version is +appended at the end of the field in the TLV format using the type +PP2_SUBTYPE_SSL_VERSION. + +PP2_CLIENT_CERT_CONN indicates that the client provided a certificate over the +current connection. PP2_CLIENT_CERT_SESS indicates that the client provided a +certificate at least once over the TLS session this connection belongs to. + +The second level TLV PP2_SUBTYPE_SSL_CIPHER provides the US-ASCII string name +of the used cipher, for example "ECDHE-RSA-AES128-GCM-SHA256". + +The second level TLV PP2_SUBTYPE_SSL_SIG_ALG provides the US-ASCII string name +of the algorithm used to sign the certificate presented by the frontend when +the incoming connection was made over an SSL/TLS transport layer, for example +"SHA256". + +The second level TLV PP2_SUBTYPE_SSL_KEY_ALG provides the US-ASCII string name +of the algorithm used to generate the key of the certificate presented by the +frontend when the incoming connection was made over an SSL/TLS transport layer, +for example "RSA2048". + +In all cases, the string representation (in UTF8) of the Common Name field +(OID: 2.5.4.3) of the client certificate's Distinguished Name, is appended +using the TLV format and the type PP2_SUBTYPE_SSL_CN. E.g. "example.com". + + +2.2.7. The PP2_TYPE_NETNS type + +The type PP2_TYPE_NETNS defines the value as the US-ASCII string representation +of the namespace's name. + + +2.2.8. Reserved type ranges + +The following range of 16 type values is reserved for application-specific +data and will be never used by the PROXY Protocol. If you need more values +consider extending the range with a type field in your TLVs. + + #define PP2_TYPE_MIN_CUSTOM 0xE0 + #define PP2_TYPE_MAX_CUSTOM 0xEF + +This range of 8 values is reserved for temporary experimental use by +application developers and protocol designers. The values from the range will +never be used by the PROXY protocol and should not be used by production +functionality. + + #define PP2_TYPE_MIN_EXPERIMENT 0xF0 + #define PP2_TYPE_MAX_EXPERIMENT 0xF7 + +The following range of 8 values is reserved for future use, potentially to +extend the protocol with multibyte type values. + + #define PP2_TYPE_MIN_FUTURE 0xF8 + #define PP2_TYPE_MAX_FUTURE 0xFF + + +3. Implementations + +HAProxy 1.5 implements version 1 of the PROXY protocol on both sides : + - the listening sockets accept the protocol when the "accept-proxy" setting + is passed to the "bind" keyword. Connections accepted on such listeners + will behave just as if the source really was the one advertised in the + protocol. This is true for logging, ACLs, content filtering, transparent + proxying, etc... + + - the protocol may be used to connect to servers if the "send-proxy" setting + is present on the "server" line. It is enabled on a per-server basis, so it + is possible to have it enabled for remote servers only and still have local + ones behave differently. If the incoming connection was accepted with the + "accept-proxy", then the relayed information is the one advertised in this + connection's PROXY line. + + - HAProxy 1.5 also implements version 2 of the PROXY protocol as a sender. In + addition, a TLV with limited, optional, SSL information has been added. + +Stunnel added support for version 1 of the protocol for outgoing connections in +version 4.45. + +Stud added support for version 1 of the protocol for outgoing connections on +2011/06/29. + +Postfix added support for version 1 of the protocol for incoming connections +in smtpd and postscreen in version 2.10. + +A patch is available for Stud[5] to implement version 1 of the protocol on +incoming connections. + +Support for versions 1 and 2 of the protocol was added to Varnish 4.1 [6]. + +Exim added support for version 1 and version 2 of the protocol for incoming +connections on 2014/05/13, and will be released as part of version 4.83. + +Squid added support for versions 1 and 2 of the protocol in version 3.5 [7]. + +Jetty 9.3.0 supports protocol version 1. + +lighttpd added support for versions 1 and 2 of the protocol for incoming +connections in version 1.4.46 [11]. + +The protocol is simple enough that it is expected that other implementations +will appear, especially in environments such as SMTP, IMAP, FTP, RDP where the +client's address is an important piece of information for the server and some +intermediaries. In fact, several proprietary deployments have already done so +on FTP and SMTP servers. + +Proxy developers are encouraged to implement this protocol, because it will +make their products much more transparent in complex infrastructures, and will +get rid of a number of issues related to logging and access control. + + +4. Architectural benefits +4.1. Multiple layers + +Using the PROXY protocol instead of transparent proxy provides several benefits +in multiple-layer infrastructures. The first immediate benefit is that it +becomes possible to chain multiple layers of proxies and always present the +original IP address. for instance, let's consider the following 2-layer proxy +architecture : + + Internet + ,---. | client to PX1: + ( X ) | native protocol + `---' | + | V + +--+--+ +-----+ + | FW1 |------| PX1 | + +--+--+ +-----+ | PX1 to PX2: PROXY + native + | V + +--+--+ +-----+ + | FW2 |------| PX2 | + +--+--+ +-----+ | PX2 to SRV: PROXY + native + | V + +--+--+ + | SRV | + +-----+ + +Firewall FW1 receives traffic from internet-based clients and forwards it to +reverse-proxy PX1. PX1 adds a PROXY header then forwards to PX2 via FW2. PX2 +is configured to read the PROXY header and to emit it on output. It then joins +the origin server SRV and presents the original client's address there. Since +all TCP connections endpoints are real machines and are not spoofed, there is +no issue for the return traffic to pass via the firewalls and reverse proxies. +Using transparent proxy, this would be quite difficult because the firewalls +would have to deal with the client's address coming from the proxies in the DMZ +and would have to correctly route the return traffic there instead of using the +default route. + + +4.2. IPv4 and IPv6 integration + +The protocol also eases IPv4 and IPv6 integration : if only the first layer +(FW1 and PX1) is IPv6-capable, it is still possible to present the original +client's IPv6 address to the target server even though the whole chain is only +connected via IPv4. + + +4.3. Multiple return paths + +When transparent proxy is used, it is not possible to run multiple proxies +because the return traffic would follow the default route instead of finding +the proper proxy. Some tricks are sometimes possible using multiple server +addresses and policy routing but these are very limited. + +Using the PROXY protocol, this problem disappears as the servers don't need +to route to the client, just to the proxy that forwarded the connection. So +it is perfectly possible to run a proxy farm in front of a very large server +farm and have it working effortless, even when dealing with multiple sites. + +This is particularly important in Cloud-like environments where there is little +choice of binding to random addresses and where the lower processing power per +node generally requires multiple front nodes. + +The example below illustrates the following case : virtualized infrastructures +are deployed in 3 datacenters (DC1..DC3). Each DC uses its own VIP which is +handled by the hosting provider's layer 3 load balancer. This load balancer +routes the traffic to a farm of layer 7 SSL/cache offloaders which load balance +among their local servers. The VIPs are advertised by geolocalised DNS so that +clients generally stick to a given DC. Since clients are not guaranteed to +stick to one DC, the L7 load balancing proxies have to know the other DCs' +servers that may be reached via the hosting provider's LAN or via the internet. +The L7 proxies use the PROXY protocol to join the servers behind them, so that +even inter-DC traffic can forward the original client's address and the return +path is unambiguous. This would not be possible using transparent proxy because +most often the L7 proxies would not be able to spoof an address, and this would +never work between datacenters. + + Internet + + DC1 DC2 DC3 + ,---. ,---. ,---. + ( X ) ( X ) ( X ) + `---' `---' `---' + | +-------+ | +-------+ | +-------+ + +----| L3 LB | +----| L3 LB | +----| L3 LB | + | +-------+ | +-------+ | +-------+ + ------+------- ~ ~ ~ ------+------- ~ ~ ~ ------+------- + ||||| |||| ||||| |||| ||||| |||| + 50 SRV 4 PX 50 SRV 4 PX 50 SRV 4 PX + + +5. Security considerations + +Version 1 of the protocol header (the human-readable format) was designed so as +to be distinguishable from HTTP. It will not parse as a valid HTTP request and +an HTTP request will not parse as a valid proxy request. Version 2 add to use a +non-parsable binary signature to make many products fail on this block. The +signature was designed to cause immediate failure on HTTP, SSL/TLS, SMTP, FTP, +and POP. It also causes aborts on LDAP and RDP servers (see section 6). That +makes it easier to enforce its use under certain connections and at the same +time, it ensures that improperly configured servers are quickly detected. + +Implementers should be very careful about not trying to automatically detect +whether they have to decode the header or not, but rather they must only rely +on a configuration parameter. Indeed, if the opportunity is left to a normal +client to use the protocol, it will be able to hide its activities or make them +appear as coming from somewhere else. However, accepting the header only from a +number of known sources should be safe. + + +6. Validation + +The version 2 protocol signature has been sent to a wide variety of protocols +and implementations including old ones. The following protocol and products +have been tested to ensure the best possible behavior when the signature was +presented, even with minimal implementations : + + - HTTP : + - Apache 1.3.33 : connection abort => pass/optimal + - Nginx 0.7.69 : 400 Bad Request + abort => pass/optimal + - lighttpd 1.4.20 : 400 Bad Request + abort => pass/optimal + - thttpd 2.20c : 400 Bad Request + abort => pass/optimal + - mini-httpd-1.19 : 400 Bad Request + abort => pass/optimal + - haproxy 1.4.21 : 400 Bad Request + abort => pass/optimal + - Squid 3 : 400 Bad Request + abort => pass/optimal + - SSL : + - stud 0.3.47 : connection abort => pass/optimal + - stunnel 4.45 : connection abort => pass/optimal + - nginx 0.7.69 : 400 Bad Request + abort => pass/optimal + - FTP : + - Pure-ftpd 1.0.20 : 3*500 then 221 Goodbye => pass/optimal + - vsftpd 2.0.1 : 3*530 then 221 Goodbye => pass/optimal + - SMTP : + - postfix 2.3 : 3*500 + 221 Bye => pass/optimal + - exim 4.69 : 554 + connection abort => pass/optimal + - POP : + - dovecot 1.0.10 : 3*ERR + Logout => pass/optimal + - IMAP : + - dovecot 1.0.10 : 5*ERR + hang => pass/non-optimal + - LDAP : + - openldap 2.3 : abort => pass/optimal + - SSH : + - openssh 3.9p1 : abort => pass/optimal + - RDP : + - Windows XP SP3 : abort => pass/optimal + +This means that most protocols and implementations will not be confused by an +incoming connection exhibiting the protocol signature, which avoids issues when +facing misconfigurations. + + +7. Future developments + +It is possible that the protocol may slightly evolve to present other +information such as the incoming network interface, or the origin addresses in +case of network address translation happening before the first proxy, but this +is not identified as a requirement right now. Some deep thinking has been spent +on this and it appears that trying to add a few more information open a Pandora +box with many information from MAC addresses to SSL client certificates, which +would make the protocol much more complex. So at this point it is not planned. +Suggestions on improvements are welcome. + + +8. Contacts and links + +Please use w@1wt.eu to send any comments to the author. + +The following links were referenced in the document. + +[1] http://www.postfix.org/XCLIENT_README.html +[2] http://tools.ietf.org/html/rfc7239 +[3] http://www.stunnel.org/ +[4] https://github.com/bumptech/stud +[5] https://github.com/bumptech/stud/pull/81 +[6] https://www.varnish-cache.org/docs/trunk/phk/ssl_again.html +[7] http://wiki.squid-cache.org/Squid-3.5 +[8] https://tools.ietf.org/html/rfc4960#appendix-B +[9] https://tools.ietf.org/rfc/rfc7301.txt +[10] https://www.ietf.org/rfc/rfc3546.txt +[11] https://redmine.lighttpd.net/issues/2804 + +9. Sample code + +The code below is an example of how a receiver may deal with both versions of +the protocol header for TCP over IPv4 or IPv6. The function is supposed to be +called upon a read event. Addresses may be directly copied into their final +memory location since they're transported in network byte order. The sending +side is even simpler and can easily be deduced from this sample code. + + struct sockaddr_storage from; /* already filled by accept() */ + struct sockaddr_storage to; /* already filled by getsockname() */ + const char v2sig[12] = "\x0D\x0A\x0D\x0A\x00\x0D\x0A\x51\x55\x49\x54\x0A"; + + /* returns 0 if needs to poll, <0 upon error or >0 if it did the job */ + int read_evt(int fd) + { + union { + struct { + char line[108]; + } v1; + struct { + uint8_t sig[12]; + uint8_t ver_cmd; + uint8_t fam; + uint16_t len; + union { + struct { /* for TCP/UDP over IPv4, len = 12 */ + uint32_t src_addr; + uint32_t dst_addr; + uint16_t src_port; + uint16_t dst_port; + } ip4; + struct { /* for TCP/UDP over IPv6, len = 36 */ + uint8_t src_addr[16]; + uint8_t dst_addr[16]; + uint16_t src_port; + uint16_t dst_port; + } ip6; + struct { /* for AF_UNIX sockets, len = 216 */ + uint8_t src_addr[108]; + uint8_t dst_addr[108]; + } unx; + } addr; + } v2; + } hdr; + + int size, ret; + + do { + ret = recv(fd, &hdr, sizeof(hdr), MSG_PEEK); + } while (ret == -1 && errno == EINTR); + + if (ret == -1) + return (errno == EAGAIN) ? 0 : -1; + + if (ret >= 16 && memcmp(&hdr.v2, v2sig, 12) == 0 && + (hdr.v2.ver_cmd & 0xF0) == 0x20) { + size = 16 + ntohs(hdr.v2.len); + if (ret < size) + return -1; /* truncated or too large header */ + + switch (hdr.v2.ver_cmd & 0xF) { + case 0x01: /* PROXY command */ + switch (hdr.v2.fam) { + case 0x11: /* TCPv4 */ + ((struct sockaddr_in *)&from)->sin_family = AF_INET; + ((struct sockaddr_in *)&from)->sin_addr.s_addr = + hdr.v2.addr.ip4.src_addr; + ((struct sockaddr_in *)&from)->sin_port = + hdr.v2.addr.ip4.src_port; + ((struct sockaddr_in *)&to)->sin_family = AF_INET; + ((struct sockaddr_in *)&to)->sin_addr.s_addr = + hdr.v2.addr.ip4.dst_addr; + ((struct sockaddr_in *)&to)->sin_port = + hdr.v2.addr.ip4.dst_port; + goto done; + case 0x21: /* TCPv6 */ + ((struct sockaddr_in6 *)&from)->sin6_family = AF_INET6; + memcpy(&((struct sockaddr_in6 *)&from)->sin6_addr, + hdr.v2.addr.ip6.src_addr, 16); + ((struct sockaddr_in6 *)&from)->sin6_port = + hdr.v2.addr.ip6.src_port; + ((struct sockaddr_in6 *)&to)->sin6_family = AF_INET6; + memcpy(&((struct sockaddr_in6 *)&to)->sin6_addr, + hdr.v2.addr.ip6.dst_addr, 16); + ((struct sockaddr_in6 *)&to)->sin6_port = + hdr.v2.addr.ip6.dst_port; + goto done; + } + /* unsupported protocol, keep local connection address */ + break; + case 0x00: /* LOCAL command */ + /* keep local connection address for LOCAL */ + break; + default: + return -1; /* not a supported command */ + } + } + else if (ret >= 8 && memcmp(hdr.v1.line, "PROXY", 5) == 0) { + char *end = memchr(hdr.v1.line, '\r', ret - 1); + if (!end || end[1] != '\n') + return -1; /* partial or invalid header */ + *end = '\0'; /* terminate the string to ease parsing */ + size = end + 2 - hdr.v1.line; /* skip header + CRLF */ + /* parse the V1 header using favorite address parsers like inet_pton. + * return -1 upon error, or simply fall through to accept. + */ + } + else { + /* Wrong protocol */ + return -1; + } + + done: + /* we need to consume the appropriate amount of data from the socket */ + do { + ret = recv(fd, &hdr, size, 0); + } while (ret == -1 && errno == EINTR); + return (ret >= 0) ? 1 : -1; + } -- cgit v1.2.3