Adding upstream version 6.1.0.upstream/6.1.0upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 290 insertions, 0 deletions

diff --git a/include/uapi/linux/can.h b/include/uapi/linux/can.h
new file mode 100644
index 0000000..892c53b
--- /dev/null
+++ b/include/uapi/linux/can.h
@@ -0,0 +1,290 @@
+/* SPDX-License-Identifier: ((GPL-2.0-only WITH Linux-syscall-note) OR BSD-3-Clause) */
+/*
+ * linux/can.h
+ *
+ * Definitions for CAN network layer (socket addr / CAN frame / CAN filter)
+ *
+ * Authors: Oliver Hartkopp <oliver.hartkopp@volkswagen.de>
+ *          Urs Thuermann   <urs.thuermann@volkswagen.de>
+ * Copyright (c) 2002-2007 Volkswagen Group Electronic Research
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of Volkswagen nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * Alternatively, provided that this notice is retained in full, this
+ * software may be distributed under the terms of the GNU General
+ * Public License ("GPL") version 2, in which case the provisions of the
+ * GPL apply INSTEAD OF those given above.
+ *
+ * The provided data structures and external interfaces from this code
+ * are not restricted to be used by modules with a GPL compatible license.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+ * DAMAGE.
+ */
+
+#ifndef _CAN_H
+#define _CAN_H
+
+#include <linux/types.h>
+#include <linux/socket.h>
+#include <linux/stddef.h> /* for offsetof */
+
+/* controller area network (CAN) kernel definitions */
+
+/* special address description flags for the CAN_ID */
+#define CAN_EFF_FLAG 0x80000000U /* EFF/SFF is set in the MSB */
+#define CAN_RTR_FLAG 0x40000000U /* remote transmission request */
+#define CAN_ERR_FLAG 0x20000000U /* error message frame */
+
+/* valid bits in CAN ID for frame formats */
+#define CAN_SFF_MASK 0x000007FFU /* standard frame format (SFF) */
+#define CAN_EFF_MASK 0x1FFFFFFFU /* extended frame format (EFF) */
+#define CAN_ERR_MASK 0x1FFFFFFFU /* omit EFF, RTR, ERR flags */
+#define CANXL_PRIO_MASK CAN_SFF_MASK /* 11 bit priority mask */
+
+/*
+ * Controller Area Network Identifier structure
+ *
+ * bit 0-28	: CAN identifier (11/29 bit)
+ * bit 29	: error message frame flag (0 = data frame, 1 = error message)
+ * bit 30	: remote transmission request flag (1 = rtr frame)
+ * bit 31	: frame format flag (0 = standard 11 bit, 1 = extended 29 bit)
+ */
+typedef __u32 canid_t;
+
+#define CAN_SFF_ID_BITS		11
+#define CAN_EFF_ID_BITS		29
+#define CANXL_PRIO_BITS		CAN_SFF_ID_BITS
+
+/*
+ * Controller Area Network Error Message Frame Mask structure
+ *
+ * bit 0-28	: error class mask (see include/uapi/linux/can/error.h)
+ * bit 29-31	: set to zero
+ */
+typedef __u32 can_err_mask_t;
+
+/* CAN payload length and DLC definitions according to ISO 11898-1 */
+#define CAN_MAX_DLC 8
+#define CAN_MAX_RAW_DLC 15
+#define CAN_MAX_DLEN 8
+
+/* CAN FD payload length and DLC definitions according to ISO 11898-7 */
+#define CANFD_MAX_DLC 15
+#define CANFD_MAX_DLEN 64
+
+/*
+ * CAN XL payload length and DLC definitions according to ISO 11898-1
+ * CAN XL DLC ranges from 0 .. 2047 => data length from 1 .. 2048 byte
+ */
+#define CANXL_MIN_DLC 0
+#define CANXL_MAX_DLC 2047
+#define CANXL_MAX_DLC_MASK 0x07FF
+#define CANXL_MIN_DLEN 1
+#define CANXL_MAX_DLEN 2048
+
+/**
+ * struct can_frame - Classical CAN frame structure (aka CAN 2.0B)
+ * @can_id:   CAN ID of the frame and CAN_*_FLAG flags, see canid_t definition
+ * @len:      CAN frame payload length in byte (0 .. 8)
+ * @can_dlc:  deprecated name for CAN frame payload length in byte (0 .. 8)
+ * @__pad:    padding
+ * @__res0:   reserved / padding
+ * @len8_dlc: optional DLC value (9 .. 15) at 8 byte payload length
+ *            len8_dlc contains values from 9 .. 15 when the payload length is
+ *            8 bytes but the DLC value (see ISO 11898-1) is greater then 8.
+ *            CAN_CTRLMODE_CC_LEN8_DLC flag has to be enabled in CAN driver.
+ * @data:     CAN frame payload (up to 8 byte)
+ */
+struct can_frame {
+	canid_t can_id;  /* 32 bit CAN_ID + EFF/RTR/ERR flags */
+	union {
+		/* CAN frame payload length in byte (0 .. CAN_MAX_DLEN)
+		 * was previously named can_dlc so we need to carry that
+		 * name for legacy support
+		 */
+		__u8 len;
+		__u8 can_dlc; /* deprecated */
+	} __attribute__((packed)); /* disable padding added in some ABIs */
+	__u8 __pad; /* padding */
+	__u8 __res0; /* reserved / padding */
+	__u8 len8_dlc; /* optional DLC for 8 byte payload length (9 .. 15) */
+	__u8 data[CAN_MAX_DLEN] __attribute__((aligned(8)));
+};
+
+/*
+ * defined bits for canfd_frame.flags
+ *
+ * The use of struct canfd_frame implies the FD Frame (FDF) bit to
+ * be set in the CAN frame bitstream on the wire. The FDF bit switch turns
+ * the CAN controllers bitstream processor into the CAN FD mode which creates
+ * two new options within the CAN FD frame specification:
+ *
+ * Bit Rate Switch - to indicate a second bitrate is/was used for the payload
+ * Error State Indicator - represents the error state of the transmitting node
+ *
+ * As the CANFD_ESI bit is internally generated by the transmitting CAN
+ * controller only the CANFD_BRS bit is relevant for real CAN controllers when
+ * building a CAN FD frame for transmission. Setting the CANFD_ESI bit can make
+ * sense for virtual CAN interfaces to test applications with echoed frames.
+ *
+ * The struct can_frame and struct canfd_frame intentionally share the same
+ * layout to be able to write CAN frame content into a CAN FD frame structure.
+ * When this is done the former differentiation via CAN_MTU / CANFD_MTU gets
+ * lost. CANFD_FDF allows programmers to mark CAN FD frames in the case of
+ * using struct canfd_frame for mixed CAN / CAN FD content (dual use).
+ * Since the introduction of CAN XL the CANFD_FDF flag is set in all CAN FD
+ * frame structures provided by the CAN subsystem of the Linux kernel.
+ */
+#define CANFD_BRS 0x01 /* bit rate switch (second bitrate for payload data) */
+#define CANFD_ESI 0x02 /* error state indicator of the transmitting node */
+#define CANFD_FDF 0x04 /* mark CAN FD for dual use of struct canfd_frame */
+
+/**
+ * struct canfd_frame - CAN flexible data rate frame structure
+ * @can_id: CAN ID of the frame and CAN_*_FLAG flags, see canid_t definition
+ * @len:    frame payload length in byte (0 .. CANFD_MAX_DLEN)
+ * @flags:  additional flags for CAN FD
+ * @__res0: reserved / padding
+ * @__res1: reserved / padding
+ * @data:   CAN FD frame payload (up to CANFD_MAX_DLEN byte)
+ */
+struct canfd_frame {
+	canid_t can_id;  /* 32 bit CAN_ID + EFF/RTR/ERR flags */
+	__u8    len;     /* frame payload length in byte */
+	__u8    flags;   /* additional flags for CAN FD */
+	__u8    __res0;  /* reserved / padding */
+	__u8    __res1;  /* reserved / padding */
+	__u8    data[CANFD_MAX_DLEN] __attribute__((aligned(8)));
+};
+
+/*
+ * defined bits for canxl_frame.flags
+ *
+ * The canxl_frame.flags element contains two bits CANXL_XLF and CANXL_SEC
+ * and shares the relative position of the struct can[fd]_frame.len element.
+ * The CANXL_XLF bit ALWAYS needs to be set to indicate a valid CAN XL frame.
+ * As a side effect setting this bit intentionally breaks the length checks
+ * for Classical CAN and CAN FD frames.
+ *
+ * Undefined bits in canxl_frame.flags are reserved and shall be set to zero.
+ */
+#define CANXL_XLF 0x80 /* mandatory CAN XL frame flag (must always be set!) */
+#define CANXL_SEC 0x01 /* Simple Extended Content (security/segmentation) */
+
+/**
+ * struct canxl_frame - CAN with e'X'tended frame 'L'ength frame structure
+ * @prio:  11 bit arbitration priority with zero'ed CAN_*_FLAG flags
+ * @flags: additional flags for CAN XL
+ * @sdt:   SDU (service data unit) type
+ * @len:   frame payload length in byte (CANXL_MIN_DLEN .. CANXL_MAX_DLEN)
+ * @af:    acceptance field
+ * @data:  CAN XL frame payload (CANXL_MIN_DLEN .. CANXL_MAX_DLEN byte)
+ *
+ * @prio shares the same position as @can_id from struct can[fd]_frame.
+ */
+struct canxl_frame {
+	canid_t prio;  /* 11 bit priority for arbitration (canid_t) */
+	__u8    flags; /* additional flags for CAN XL */
+	__u8    sdt;   /* SDU (service data unit) type */
+	__u16   len;   /* frame payload length in byte */
+	__u32   af;    /* acceptance field */
+	__u8    data[CANXL_MAX_DLEN];
+};
+
+#define CAN_MTU		(sizeof(struct can_frame))
+#define CANFD_MTU	(sizeof(struct canfd_frame))
+#define CANXL_MTU	(sizeof(struct canxl_frame))
+#define CANXL_HDR_SIZE	(offsetof(struct canxl_frame, data))
+#define CANXL_MIN_MTU	(CANXL_HDR_SIZE + 64)
+#define CANXL_MAX_MTU	CANXL_MTU
+
+/* particular protocols of the protocol family PF_CAN */
+#define CAN_RAW		1 /* RAW sockets */
+#define CAN_BCM		2 /* Broadcast Manager */
+#define CAN_TP16	3 /* VAG Transport Protocol v1.6 */
+#define CAN_TP20	4 /* VAG Transport Protocol v2.0 */
+#define CAN_MCNET	5 /* Bosch MCNet */
+#define CAN_ISOTP	6 /* ISO 15765-2 Transport Protocol */
+#define CAN_J1939	7 /* SAE J1939 */
+#define CAN_NPROTO	8
+
+#define SOL_CAN_BASE 100
+
+/**
+ * struct sockaddr_can - the sockaddr structure for CAN sockets
+ * @can_family:  address family number AF_CAN.
+ * @can_ifindex: CAN network interface index.
+ * @can_addr:    protocol specific address information
+ */
+struct sockaddr_can {
+	__kernel_sa_family_t can_family;
+	int         can_ifindex;
+	union {
+		/* transport protocol class address information (e.g. ISOTP) */
+		struct { canid_t rx_id, tx_id; } tp;
+
+		/* J1939 address information */
+		struct {
+			/* 8 byte name when using dynamic addressing */
+			__u64 name;
+
+			/* pgn:
+			 * 8 bit: PS in PDU2 case, else 0
+			 * 8 bit: PF
+			 * 1 bit: DP
+			 * 1 bit: reserved
+			 */
+			__u32 pgn;
+
+			/* 1 byte address */
+			__u8 addr;
+		} j1939;
+
+		/* reserved for future CAN protocols address information */
+	} can_addr;
+};
+
+/**
+ * struct can_filter - CAN ID based filter in can_register().
+ * @can_id:   relevant bits of CAN ID which are not masked out.
+ * @can_mask: CAN mask (see description)
+ *
+ * Description:
+ * A filter matches, when
+ *
+ *          <received_can_id> & mask == can_id & mask
+ *
+ * The filter can be inverted (CAN_INV_FILTER bit set in can_id) or it can
+ * filter for error message frames (CAN_ERR_FLAG bit set in mask).
+ */
+struct can_filter {
+	canid_t can_id;
+	canid_t can_mask;
+};
+
+#define CAN_INV_FILTER 0x20000000U /* to be set in can_filter.can_id */
+#define CAN_RAW_FILTER_MAX 512 /* maximum number of can_filter set via setsockopt() */
+
+#endif /* !_UAPI_CAN_H */