diff options
Diffstat (limited to 'doc/examples/template-power-user-home/kea-dhcp4-2.conf')
| -rw-r--r-- | doc/examples/template-power-user-home/kea-dhcp4-2.conf | 223 |
1 files changed, 223 insertions, 0 deletions
diff --git a/doc/examples/template-power-user-home/kea-dhcp4-2.conf b/doc/examples/template-power-user-home/kea-dhcp4-2.conf new file mode 100644 index 0000000..059a895 --- /dev/null +++ b/doc/examples/template-power-user-home/kea-dhcp4-2.conf @@ -0,0 +1,223 @@ +// This is an example configuration of the Kea DHCPv4 server 2: +// +// - uses High Availability hooks library and Lease Commands hooks library +// to enable High Availability function for the DHCP server. This config +// file is for the primary (the active) server. +// - uses memfile, which stores lease data in a local CSV file +// - it assumes a single /24 addressing over a link that is directly reachable +// (no DHCP relays) +// - there is a handful of IP reservations +// +// It is expected to run with a primary (the active) server, which has a very similar +// configuration. The only difference is that "this-server-name" must be set to "server2" on the +// other server. Also, the interface configuration depends on the network settings of the +// particular machine. + +{ + +"Dhcp4": { + + // Add names of your network interfaces to listen on. + "interfaces-config": { + // The DHCPv4 server listens on this interface. When changing this to + // the actual name of your interface, make sure to also update the + // interface parameter in the subnet definition below. + "interfaces": [ "enp0s8" ] + }, + + // Control socket is required for communication between the Control + // Agent and the DHCP server. High Availability requires Control Agent + // to be running because lease updates are sent over the RESTful + // API between the HA peers. + "control-socket": { + "socket-type": "unix", + "socket-name": "/tmp/kea4-ctrl-socket" + }, + + // Use Memfile lease database backend to store leases in a CSV file. + // Depending on how Kea was compiled, it may also support SQL databases + // (MySQL and/or PostgreSQL). Those database backends require more + // parameters, like name, host and possibly user and password. + // There are dedicated examples for each backend. See Section 7.2.2 "Lease + // Storage" for details. + "lease-database": { + // Memfile is the simplest and easiest backend to use. It's an in-memory + // database with data being written to a CSV file. It is very similar to + // what ISC DHCP does. + "type": "memfile" + }, + + // Let's configure some global parameters. The home network is not very dynamic + // and there's no shortage of addresses, so no need to recycle aggressively. + "valid-lifetime": 43200, // leases will be valid for 12h + "renew-timer": 21600, // clients should renew every 6h + "rebind-timer": 32400, // clients should start looking for other servers after 9h + + // Kea will clean up its database of expired leases once per hour. However, it + // will keep the leases in expired state for 2 days. This greatly increases the + // chances for returning devices to get the same address again. To guarantee that, + // use host reservation. + "expired-leases-processing": { + "reclaim-timer-wait-time": 3600, + "hold-reclaimed-time": 172800, + "max-reclaim-leases": 0, + "max-reclaim-time": 0 + }, + + // HA requires two hooks libraries to be loaded: libdhcp_lease_cmds.so and + // libdhcp_ha.so. The former handles incoming lease updates from the HA peers. + // The latter implements high availability feature for Kea. Note the library name + // should be the same, but the path is OS specific. + "hooks-libraries": [ + // The lease_cmds library must be loaded because HA makes use of it to + // deliver lease updates to the server as well as synchronize the + // lease database after failure. + { + "library": "/usr/lib/x86_64-linux-gnu/kea/hooks/libdhcp_lease_cmds.so" + }, + + { + // The HA hooks library should be loaded. + "library": "/usr/lib/x86_64-linux-gnu/kea/hooks/libdhcp_ha.so", + "parameters": { + // Each server should have the same HA configuration, except for the + // "this-server-name" parameter. + "high-availability": [ { + // This parameter points to this server instance. The respective + // HA peers must have this parameter set to their own names. + "this-server-name": "server2", + // The HA mode is set to hot-standby. In this mode, the active server handles + // all the traffic. The standby takes over if the primary becomes unavailable. + "mode": "hot-standby", + // Heartbeat is to be sent every 10 seconds if no other control + // commands are transmitted. + "heartbeat-delay": 10000, + // Maximum time for partner's response to a heartbeat, after which + // failure detection is started. This is specified in milliseconds. + // If we don't hear from the partner in 60 seconds, it's time to + // start worrying. + "max-response-delay": 60000, + // The following parameters control how the server detects the + // partner's failure. The ACK delay sets the threshold for the + // 'secs' field of the received discovers. This is specified in + // milliseconds. + "max-ack-delay": 5000, + // This specifies the number of clients which send messages to + // the partner but appear to not receive any response. + "max-unacked-clients": 5, + // This specifies the maximum timeout (in milliseconds) for the server + // to complete sync. If you have a large deployment (high tens or + // hundreds of thousands of clients), you may need to increase it + // further. The default value is 60000ms (60 seconds). + "sync-timeout": 60000, + "peers": [ + // This is the configuration of this server instance. + { + "name": "server1", + // This specifies the URL of the partner's server instance. The + // Control Agent must run along with partner DHCPv4 server + // instance and the "http-host" and "http-port" must be + // set to the corresponding values. + "url": "http://192.168.1.2:8000/", + // That server is primary. Our server must be + // standby. + "role": "primary" + }, + // This is our (server2) configuration. + { + "name": "server2", + // Specifies the URL on which the control agent for this server + // can be reached. The Control Agent is required + // to run on this machine with "http-host" and + // "http-port" values set to the corresponding values. + "url": "http://192.168.1.3:8000/", + // Our server is standby. The other server is primary. + "role": "standby" + } + ] + } ] + } + } + ], + + // This example contains a single subnet declaration. + "subnet4": [ + { + // Subnet prefix. + "subnet": "192.168.1.0/24", + + // There are no relays in this network, so we need to tell Kea that this subnet + // is reachable directly via the ethX interface. + "interface": "enp0s8", + + // Specify a dynamic address pool. + "pools": [ + { + "pool": "192.168.1.100-192.168.1.199" + } + ], + + // These are options that are subnet specific. In most cases, you need to define at + // least routers option, as without this option your clients will not be able to reach + // their default gateway and will not have Internet connectivity. If you have many + // subnets and they share the same options (e.g. DNS servers typically is the same + // everywhere), you may define options at the global scope, so you don't repeat them + // for every network. + "option-data": [ + { + // For each IPv4 subnet you typically need to specify at least one router. + "name": "routers", + "data": "192.168.1.1" + }, + { + // Using cloudflare or Quad9 is a reasonable option. Change this + // to your own DNS servers is you have them. Another popular + // choice is 8.8.8.8, owned by Google. Using third party DNS + // service raises some privacy concerns. + "name": "domain-name-servers", + "data": "1.1.1.1,9.9.9.9" + } + ], + + // Some devices should get a static address. Since the .100 - .199 range is dynamic, + // let's use the lower address space for this. There are many ways how reservation + // can be defined, but using MAC address (hw-address) is by far the most popular one. + // You can use client-id, duid and even custom defined flex-id that may use whatever + // parts of the packet you want to use as identifiers. Also, there are many more things + // you can specify in addition to just an IP address: extra options, next-server, hostname, + // assign device to client classes etc. See the Kea ARM, Section 8.3 for details. + // The reservations are subnet specific. + "reservations": [ + { + "hw-address": "1a:1b:1c:1d:1e:1f", + "ip-address": "192.168.1.10" + }, + { + "client-id": "01:11:22:33:44:55:66", + "ip-address": "192.168.1.11" + } + ] + } + ], + + // Logging configuration starts here. + "loggers": [ + { + // This section affects kea-dhcp4, which is the base logger for DHCPv4 component. It tells + // DHCPv4 server to write all log messages (on severity INFO or higher) to a file. The file + // will be rotated once it grows to 2MB and up to 4 files will be kept. The debuglevel + // (range 0 to 99) is used only when logging on DEBUG level. + "name": "kea-dhcp4", + "output_options": [ + { + "output": "/var/log/kea-dhcp4.log", + "maxsize": 2048000, + "maxver": 4 + } + ], + "severity": "INFO", + "debuglevel": 0 + } + ] +} +} |