// This is an example configuration file for the DHCPv4 server in Kea
// illustrating the configuration of the RADIUS and Host Cache hooks libraries.
//
// It is not intended to be used as is. It tries to showcase some of the
// parameters available.
//
// To use this configuration file, you need to have both RADIUS and
// Host Cache hooks. These are currently available to support customers only.
//
// clients get a wine name (option AOP code 250) divided into red and white.
// Expensive brands have a host entry, i.e. a reserved address.
//
// Names
//
// brouilly (red)
// chablis (white)
// chambertin (red, expensive)
// chinon (red)
// chiroubles (red)
// condrieu (white)
// cornas (red)
// corton (red)
// fleurie (red)
// givry (red)
// margaux (red, expensive)
// meursault (white)
// montrachet (white, expensive)
// morgon (red)
// muscadet (white)
// petrus (red, expensive)
// riesling (white)
// romanee (red, expensive)
// sylvaner (white)
// yquem (white, expensive)
//
// Address space is 192.0.2.0/24 with 10-99 for reds and 110-199 for whites.
//
// Reservations are given here in Kea/JSON style but they must be
// in the RADIUS server configuration:
//
//       {
//          "flex-id": "'chambertin'",
//          "ip-address": "192.0.2.10"
//       },
//       {
//          "flex-id": "'margaux'",
//          "ip-address": "192.0.2.11"
//       },
//       {
//          "flex-id": "'petrus'",
//          "ip-address": "192.0.2.12"
//       },
//       {
//          "flex-id": "'romanee'",
//          "ip-address": "192.0.2.13"
//       },
//       {
//          "flex-id": "'montrachet'",
//          "ip-address": "192.0.2.110"
//       },
//       {
//          "flex-id": "'yquem'",
//          "ip-address": "192.0.2.111"
//       }
//

{"Dhcp4":

{
  // Kea is told to listen on specific interfaces only.
  "interfaces-config": {
    // You should probably list your network interfaces here (e.g. "eth1961")
    "interfaces": [ "eth1961" ]
  },

  // Set up the storage for leases.
  "lease-database": {
    "type": "memfile"
  },

  // Note there is hosts-database defined. RADIUS and Host Cache libraries
  // will create them dynamically.

  // RADIUS uses flex-id reservations, so restrict Kea to use flex-id only.
  "host-reservation-identifiers": [ "flex-id" ],

  // Define the AOP option.
  "option-def": [ {
      "name": "AOP",
      "code": 250,
      "type": "string" } ],

  // Define red and white client classes.
  // If they are not defined we can get spurious warnings.
  "client-classes": [
      { "name": "red" },
      { "name": "white" } ],

  // Define a subnet.
  "subnet4": [ {
      // Set the subnet ID (aka RADIUS NAS port).
      "id": 14,
      "subnet": "192.0.2.0/24",
      "interface": "eth1961",
      "pools": [
         {
            // Red pool (10-19 are for reservations)
            "pool": "192.0.2.20-192.0.2.99",
            "client-class": "red"
         },
         {
            // White pool (110-119 are for reservations)
            "pool": "192.0.2.120-192.0.2.199",
            "client-class": "white"
         }

          // Note there are not pools available to anyone. This is
          // important to note. This means that to get an address, the
          // client needs to belong to red class, to white class or
          // have an address reserved.
      ]
    } ],

  // Set up the hooks libraries.
  "hooks-libraries": [
     {
        // Load the flex-id hook library.
        "library": "/usr/local/lib/kea/hooks/libdhcp_flex_id.so",

        "parameters": {
            // Take the ID from the AOP option.
            "identifier-expression": "option[250].text",

            // Replace the client ID in queries by the flex-id.
            // Currently required by access code.
            // Required for accounting as it will become the lease ID too.
            "replace-client-id": true
        }
     },
     {
         // Load the host cache hook library. It is needed by the RADIUS
         // library to keep the attributes from authorization to later user
         // for accounting.
         "library": "/usr/local/lib/kea/hooks/libdhcp_host_cache.so"
     },
     {
         // Load the RADIUS hook library.
         "library": "/usr/local/lib/kea/hooks/libdhcp_radius.so",

         "parameters": {
             // If do not use RFC 4361
             // "extract-duid": false,

             // If have conflicting subnets
             // "reselect-subnet-pool": true,

             // Strip the 0 type added by flex-id
             "client-id-pop0": true,

             // flex Id is printable (far easier for the RADIUS server config)
             // Without this it will be in hexadecimal...
             "client-id-printable": true,

             // Use the flex-id.
             "identifier-type4": "flex-id",

             // Configure an access (aka authentication/authorization) server.
             "access": {

                 // This starts the list of access servers
                 "servers": [
                     {
                         // These are parameters for the first (and only) access server
                         "name": "127.0.0.1",
                         "port": 1812,
                         "secret": "secret"
                     }
                     // Additional access servers could be specified here
                 ],

                 // This define a list of additional attributes Kea will send to each
                 // access server in Access-Request.
                 "attributes": [
                 {
                     // This attribute is identified by name (must be present in the
                     // dictionary) and has static value (i.e. the same value will be
                     // sent to every server for every packet)
                     "name": "Password",
                     "data": "mysecretpassword"
                 },
                 {
                     // It's also possible to specify an attribute using its type,
                     // rather than a name. 77 is Connect-Info. The value is specified
                     // using hex. Again, this is a static value. It will be sent the
                     // same for every packet and to every server.
                     "type": 77,
                     "raw": "65666a6a71"
                 },
                 {
                     // This example shows how an expression can be used to send dynamic
                     // value. The expression (see Section 13) may take any value from
                     // the incoming packet or even its metadata (e.g. the interface
                     // it was received over from)
                     "name": "Configuration-Token",
                     "expr": "pkt.iface"
                 }
                 ] // End of attributes
              },

             // Configure an accounting server.
             "accounting": {
                 "servers": [ {
                         "name": "127.0.0.1",
                         "port": 1813,
                         "secret": "secret"
                     }
                ]
             }
         }
     }
     ]
}

}