// This is an example configuration file for the DHCPv4 server in Kea.
// The purpose of this example is to showcase how configure
// Vendor Specific Information (code 43) RFC 2132 section 8.4
{
    "Dhcp4": {
        "option-def": [
            {
// Two options that we are planning to include in option 43 as suboptions
// should be defined on global level
                "array": false,
                "code": 2,
                "name": "vlanid",
// suboptions should have space configured and it can't start with 'vendor-'
// otherwise those will be included in 125 option not 43
                "space": "339",
                "type": "uint32"
            },
            {
                "array": false,
                "code": 3,
                "name": "dls",
                "space": "339",
                "type": "string"
            }
        ],
        "client-classes": [
            {

// Kea needs classification based on option 60, you can either use name:
// VENDOR_CLASS_ + option 60 content (test parameter is not required than)
// or use any name and add "test" parameter accordingly e.g.
// "test": "substring(option[60].hex,0,9) == 'partial-content-of-option-60'"
                "name": "VENDOR_CLASS_339",
                "option-def": [
                    {
// Vendor-specific option has to be defined on the class level, if we're planning
// to send a single value, then define its type accordingly. If this option
// should encapsulate other suboptions, the "space" parameter should be the same
// as included suboptions and "type" set to empty
                        "code": 43,
// Using the "encapsulate" direction, Kea is told to include options from
// the "339" namespace. We have defined several such options earlier.
// This way, the sub-options are "glued" to this option 43.
                        "encapsulate": "339",
                        "name": "vendor-encapsulated-options",
                        "type": "empty"
                    }
                ],
                "option-data": [
                    {
// vendor-encapsulated-options and defined option on global level should
// be also configured  with proper "data" parameters in "option-data" list.
// Because Kea will send only option that client ask for, and there is no way
// to ask for suboptions, parameter "always-send" with value set
// to true has also be included in all custom suboptions
                        "name": "vendor-encapsulated-options"
                    },
                    {
                        "always-send": true,
                        "data": "123",
                        "name": "vlanid",
                        "space": "339"
                    },
                    {
                        "always-send": true,
                        "data": "sdlp://192.0.2.11:18443",
                        "name": "dls",
                        "space": "339"
                    }
                ]
            }
        ],
// Kea is told to listen on eth0 interface only.
        "interfaces-config": {
            "interfaces": ["eth0"]
        },
// We need to specify the database used to store leases.
        "lease-database": {
            "type": "memfile"
        },
// The following list defines subnets. We have only one subnet
// here. We tell Kea that it is directly available over local interface.
        "subnet4": [
            {
                "interface": "eth0",
                "pools": [
                    {
                        "pool": "192.0.2.50-192.0.2.50"
                    }
                ],
                "subnet": "192.0.2.0/24"
            }
        ]
    }
}