// This is an example configuration file for the DHCPv6 server in Kea.
// It demonstrates how global host reservations can be configured.
// The global reservations are not associated with any subnet. They
// are assigned regardless of the subnet to which the DHCP client belongs.
// Global reservations are assigned to the DHCP clients using the
// same host identifier types as subnet specific reservations. This file
// contains multiple examples of host reservations using different
// identifier types, e.g. DUID, MAC address etc.
{ "Dhcp6":

{
// Kea is told to listen on eth0 interface only.
  "interfaces-config": {
    "interfaces": [ "eth0" ]
  },

// We need to specify the database used to store leases. As of
// June 2022, three database backends are supported: MySQL,
// PostgreSQL and the in-memory database, Memfile.
// We'll use memfile  because it doesn't require any prior set up.
  "lease-database": {
      "type": "memfile",
      "lfc-interval": 3600
  },

// This is pretty basic stuff, it has nothing to do with reservations.
  "preferred-lifetime": 3000,
  "valid-lifetime": 4000,
  "renew-timer": 1000,
  "rebind-timer": 2000,

// Kea supports three types of identifiers in DHCPv6: hw-address (hardware/MAC
// address of the client), duid (DUID inserted by the client) and flex-id
// (flexible identifier available when flex_id hook library is loaded) When told
// to do so, Kea can check for each of these identifier types, but it takes a
// costly database lookup to do so. It is therefore useful from a performance
// perspective to use only the reservation types that are actually used in a
// given network.
  "host-reservation-identifiers": [ "duid", "hw-address", "flex-id" ],

// This directive tells Kea that reservations are global. Note that this
// can also be specified at shared network and/or subnet level.
// "reservation-mode": "global",
// It is replaced by the "reservations-global", "reservations-in-subnet" and
// "reservations-out-of-pool" parameters.

// Specify if server should lookup global reservations.
  "reservations-global": true,

// Specify if server should lookup in-subnet reservations.
  "reservations-in-subnet": false,

// Specify if server can assume that all reserved addresses
// are out-of-pool.
// Ignored when reservations-in-subnet is false.
// If specified, it is inherited by "shared-networks" and "subnet6" levels.
  "reservations-out-of-pool": false,

// Define several global host reservations.
  "reservations": [

// This is a simple host reservation. The host with DUID matching
// the specified value will get an address of 2001:db8:1::100.
// Note it is not recommended but still allowed to reverse addresses at
// the global scope: as it breaks the link between the reservation and
// the subnet it can lead to a client localized in another subnet than
// its address belongs to.
      {
          "duid": "01:02:03:04:05:0A:0B:0C:0D:0E",
          "ip-addresses": [ "2001:db8:1::100" ]
      },

// This is similar to the previous one, but this time the reservation
// is done based on hardware/MAC address. The server will do its best to
// extract the hardware/MAC address from received packets (see
// 'mac-sources' directive for details). This particular reservation
// also specifies two extra options to be available for this client. If
// there are options with the same code specified in a global, subnet or
// class scope, the values defined at host level take precedence for
// this particular DHCP client.
      {
          "hw-address": "00:01:02:03:04:05",
          "ip-addresses": [ "2001:db8:1::101" ],
          "option-data": [
              {
                  "name": "dns-servers",
                  "data": "3000:1::234"
              },
              {
                  "name": "nis-servers",
                  "data": "3000:1::234"
              }
          ],
          "client-classes": [ "special_snowflake", "office" ]
      },

// This is a bit more advanced reservation. The client with the specified
// DUID will get a reserved address, a reserved prefix and a hostname.
// At least one of the three must be specified in a reservation.
// Finally, this reservation features vendor specific options for CableLabs,
// which happen to use enterprise-id 4491. Those particular values will
// be returned only to the client that has a DUID matching this reservation.
      {
          "duid": "01:02:03:04:05:06:07:08:09:0A",
          "ip-addresses": [ "2001:db8:1:cafe::1" ],
          "prefixes": [ "2001:db8:2:abcd::/64" ],
          "hostname": "foo.example.com",
          "option-data": [
              {
                  "name": "vendor-opts",
                  "data": "4491"
              },
              {
                  "name": "tftp-servers",
                  "space": "vendor-4491",
                  "data": "3000:1::234"
              }
          ]
      },

// This reservation is using flexible identifier. Instead of relying
// on specific field, sysadmin can define an expression similar to what
// is used for client classification,
// e.g. substring(relay[0].option[17],0,6). Then, based on the value of
// that expression for incoming packet, the reservation is matched.
// Expression can be specified either as hex or plain text using single
// quotes.
// Note: flexible identifier requires flex_id hook library to be
// loaded to work.
      {
          "flex-id": "'somevalue'",
          "ip-addresses": [ "2001:db8:1:cafe::2" ]
      }
  ],

// The following list defines subnets. Subnet, pools and interface definitions
// are the same as in the regular scenario.
    "subnet6": [
        {
            "subnet": "2001:db8::/47",

            "pools": [ { "pool": "2001:db8::/64" } ],

            "pd-pools": [
                {
                    "prefix": "2001:db8:1:8000::",
                    "prefix-len": 56,
                    "delegated-len": 64
                }
            ],
            "interface": "eth0"
        }
    ],

// The following configures logging. It assumes that messages with at
// least informational level (info, warn, error and fatal) should be
// logged to stdout.
    "loggers": [
        {
            "name": "kea-dhcp6",
            "output_options": [
                {
                    "output": "stdout"
                }
            ],
            "debuglevel": 0,
            "severity": "INFO"
        }
    ]
}

}