// This is an example configuration file for DHCPv6 server in Kea.
// It demonstrates an advanced feature called shared network. Typically, for
// each physical link there is one IPv6 subnet that the server is expected
// to manage. However, in some cases there is a need to configure more subnets
// in the same physical location. This may sound odd, as IPv6 is not expected
// to run out of addresses. However, due to vast address space some deployments
// experiment with various addressing schemes and later find out that the
// initial proposal was not best and way to migrate to something else.
{
    "Dhcp6": {
        // Kea is told to listen on eth0 interface only.
        "interfaces-config": {
            "interfaces": [ "eth0" ]
        },

        // You also need to tell where to store lease information.
        // memfile is the backend that is easiest to set up.
        "lease-database": {
            "type": "memfile",
            "lfc-interval": 3600
        },

        // It is likely that in your network you'll have a mix of regular,
        // "plain" subnets and shared networks. It is perfectly valid to mix
        // them in the same config file.
        //
        // This is regular subnet. It's not part of any shared-network.
        "subnet6": [
            {
                "pools": [ { "pool": "2001:db8:2::/80" } ],
                "subnet": "2001:db8:2::/64",
                "interface": "eth0"
            }
        ],

        // Hhe shared networks definition starts here. shared-networks can
        // contain a list of shared networks. There are many parameters
        // that can be specified here, so this example may be overwhelming
        // at first, but the only mandatory parameter for each shared
        // network is name. It must be unique. Typically, each shared
        // network also needs to have at least two subnets to be functional,
        // but if you really want to, you can define a degraded shared
        // network that has 1 or even 0 subnets. This may come in handy
        // when migrating between regular subnets and shared networks
        // or when debugging a problem. It is not recommended to use
        // 1 subnet per shared network, as there is extra processing
        // overhead for shared networks.
        "shared-networks": [
        {
            "interface": "eth1",

            // Similar to regular subnets, it is forbidden to define both
            // interface and interface-id at the same time. That's because
            // interface parameter expresses physical network interface
            // for links available locally and interface-id identifies
            // values inserted by relays, which are only used for
            // remote traffic. A shared network cannot be both direct
            // and relayed.
            //"interface-id": "content of the option",

            // Other parameters defined here will be inherited by the
            // subnets.
            "name": "frog",
            "option-data": [ ],
            "preferred-lifetime": 200,
            "rapid-commit": true,
            "rebind-timer": 150,
            "relay": {
                "ip-address": "2001:db8::1"
            },
            "renew-timer": 100,

            // "reservation-mode": "all",
            // It is replaced by the "reservations-global",
            // "reservations-in-subnet" and "reservations-out-of-pool"
            // parameters.

            // Specify if server should lookup global reservations.
            "reservations-global": false,

            // Specify if server should lookup in-subnet reservations.
            "reservations-in-subnet": true,

            // Specify if server can assume that all reserved addresses
            // are out-of-pool.
            // Ignored when reservations-in-subnet is false.
            // If specified, it is inherited by "subnet6" levels.
            "reservations-out-of-pool": false,

            // List of subnets belonging to this particular shared-network
            // start here.
            "subnet6": [

                // This is the first subnet.
                {
                    "preferred-lifetime": 30,
                    "rapid-commit": false,
                    "rebind-timer": 20,
                    // It is possible to override some values here.
                    "relay": {
                        "ip-address": "2001:db8:1::123"
                    },
                    "renew-timer": 10,
                    // "reservation-mode": "all",
                    // It is replaced by the "reservations-global",
                    // "reservations-in-subnet" and "reservations-out-of-pool"
                    // parameters.
                    // Specify if server should lookup global reservations.
                    "reservations-global": false,
                    // Specify if server should lookup in-subnet reservations.
                    "reservations-in-subnet": true,
                    // Specify if server can assume that all reserved addresses
                    // are out-of-pool.
                    // Ignored when reservations-in-subnet is false.
                    "reservations-out-of-pool": false,
                    "subnet": "2001:db8:1::/64",
                    "pools": [ { "pool": "2001:db8:1:0:abcd::/80" } ],
                    "valid-lifetime": 40
                },

                // This is the second subnet.
                {
                    "preferred-lifetime": 30,
                    "pools": [ { "pool": "3000:db8::/64" } ],
                    "rapid-commit": false,
                    "rebind-timer": 20,
                    "relay": {
                        "ip-address": "3000::1"
                    },
                    "renew-timer": 10,
                    // "reservation-mode": "all",
                    // It is replaced by the "reservations-global",
                    // "reservations-in-subnet" and "reservations-out-of-pool"
                    // parameters.
                    // Specify if server should lookup global reservations.
                    "reservations-global": false,
                    // Specify if server should lookup in-subnet reservations.
                    "reservations-in-subnet": true,
                    // Specify if server can assume that all reserved addresses
                    // are out-of-pool.
                    // Ignored when reservations-in-subnet is false.
                    "reservations-out-of-pool": false,
                    "subnet": "3000::/16",
                    "valid-lifetime": 40
                }
            ],
            "valid-lifetime": 300
        } ]
    }
}