# Copyright (C) 2012-2022 Internet Systems Consortium, Inc. ("ISC") # # This Source Code Form is subject to the terms of the Mozilla Public # License, v. 2.0. If a copy of the MPL was not distributed with this # file, You can obtain one at http://mozilla.org/MPL/2.0/. $NAMESPACE isc::dhcp % DHCPSRV_CFGMGR_ADD_IFACE listening on interface %1 An info message issued when a new interface is being added to the collection of interfaces on which the server listens to DHCP messages. % DHCPSRV_CFGMGR_ADD_SUBNET4 adding subnet %1 A debug message reported when the DHCP configuration manager is adding the specified IPv4 subnet to its database. % DHCPSRV_CFGMGR_ADD_SUBNET6 adding subnet %1 A debug message reported when the DHCP configuration manager is adding the specified IPv6 subnet to its database. % DHCPSRV_CFGMGR_ALL_IFACES_ACTIVE enabling listening on all interfaces A debug message issued when the server is being configured to listen on all interfaces. % DHCPSRV_CFGMGR_CFG_DHCP_DDNS Setting DHCP-DDNS configuration to: %1 A debug message issued when the server's DHCP-DDNS settings are changed. % DHCPSRV_CFGMGR_CLEAR_ACTIVE_IFACES stop listening on all interfaces A debug message issued when configuration manager clears the internal list of active interfaces. This doesn't prevent the server from listening to the DHCP traffic through open sockets, but will rather be used by Interface Manager to select active interfaces when sockets are re-opened. % DHCPSRV_CFGMGR_CONFIG4_MERGED Configuration backend data has been merged. This is an informational message emitted when the DHCPv4 server has successfully merged configuration data retrieved from its configuration backends into the current configuration. % DHCPSRV_CFGMGR_CONFIG6_MERGED Configuration backend data has been merged. This is an informational message emitted when the DHCPv6 server has successfully merged configuration data retrieved from its configuration backends into the current configuration. % DHCPSRV_CFGMGR_CONFIGURE_SERVERID server configuration includes specification of a server identifier This warning message is issued when the server specified configuration of a server identifier. If this new configuration overrides an existing server identifier, this will affect existing bindings of the clients. Clients will use old server identifier when they renew their bindings. The server will not respond to those renews, and the clients will eventually transition to rebinding state. The server should reassign existing bindings and the clients will subsequently use new server identifier. It is recommended to not modify the server identifier, unless there is a good reason for it, to avoid increased number of renewals and a need for rebinding (increase of multicast traffic, which may be received by multiple servers). % DHCPSRV_CFGMGR_DDNS_PARAMETER_IGNORED dhcp-ddns:%1 is deprecated, using existing global:%2 This is an informational message issued during configuration parsing when the server detects that a deprecated parameter has been specified in the "dhcp-ddns" element which conflicts with its corresponding global parameter. When this occurs the server simply ignores the value from dhcp-ddns. The log message shows be the deprecated and the supported parameter names. Note the configuration change only affects the in-memory configuration. Modify the configuration to comply with the supported parameters. % DHCPSRV_CFGMGR_DDNS_PARAMETER_MOVED dhcp-ddns:%1 is deprecated, moving it to global:%2 This is an informational message issued during configuration parsing when the server detects that a deprecated parameter has been specified in the "dhcp-ddns" element for which no corresponding global value exists. When this occurs, the server removes the parameter from dhcp-ddns and inserts the parameter into the global scope. The log message shows the deprecated and the supported parameter names. Note the configuration change only affects the in-memory configuration. Modify the configuration to comply with the supported parameters. % DHCPSRV_CFGMGR_DEL_SUBNET4 IPv4 subnet %1 removed This debug message is issued when a subnet is successfully removed from the server configuration. The argument identifies the removed subnet. % DHCPSRV_CFGMGR_DEL_SUBNET6 IPv6 subnet %1 removed This debug message is issued when a subnet is successfully removed from the server configuration. The argument identifies the removed subnet. % DHCPSRV_CFGMGR_IPV4_RESERVATIONS_NON_UNIQUE_IGNORED ignoring "ip-reservations-unique" setting because at least one of the host database backends does not support non-unique IP reservations in a subnet This warning message is issued when the server failed to use the new setting of the ip-reservations-unique global parameter configured via the configuration backend. Some host database backends used apparently do not support specifying several reservations for the same IP address in a subnet. The administrator should either stop using the backend that does not support this setting or set the value of the ip-reservations-unique to true to resolve the configuration issue. % DHCPSRV_CFGMGR_IPV6_RESERVATIONS_NON_UNIQUE_IGNORED ignoring "ip-reservations-unique" setting because at least one of the host database backends does not support non unique IP reservations in a subnet This warning message is issued when the server failed to use the new setting of the ip-reservations-unique global parameter configured via the configuration backend. Some host database backends used apparently do not support specifying several reservations for the same IP address or delegated prefix in a subnet. The administrator should either stop using the backend that does not support this setting or set the value of the ip-reservations-unique to true to resolve the configuration issue. % DHCPSRV_CFGMGR_IP_RESERVATIONS_UNIQUE_DUPLICATES_POSSIBLE setting "ip-reservations-unique" from false to true poses a risk that some host backends may still contain multiple reservations for the same IP address This warning message is issued when the DHCP server is configured to not allow multiple reservations for the same IP address. However, the host database backends may still contain multiple reservations for the same IP addresses causing problems with lease allocation for certain addresses. Please ensure that all such duplicates are removed. % DHCPSRV_CFGMGR_NEW_SUBNET4 a new subnet has been added to configuration: %1 This is an informational message reporting that the configuration has been extended to include the specified IPv4 subnet. % DHCPSRV_CFGMGR_NEW_SUBNET6 a new subnet has been added to configuration: %1 This is an informational message reporting that the configuration has been extended to include the specified subnet. % DHCPSRV_CFGMGR_NO_SUBNET4 no suitable subnet is defined for address hint %1 This debug message is output when the DHCP configuration manager has received a request for an IPv4 subnet for the specified address, but no such subnet exists. % DHCPSRV_CFGMGR_NO_SUBNET6 no suitable subnet is defined for address hint %1 This debug message is output when the DHCP configuration manager has received a request for an IPv6 subnet for the specified address, but no such subnet exists. % DHCPSRV_CFGMGR_ONLY_SUBNET4 retrieved subnet %1 for address hint %2 This is a debug message reporting that the DHCP configuration manager has returned the specified IPv4 subnet when given the address hint specified because it is the only subnet defined. % DHCPSRV_CFGMGR_ONLY_SUBNET6 retrieved subnet %1 for address hint %2 This is a debug message reporting that the DHCP configuration manager has returned the specified IPv6 subnet when given the address hint specified because it is the only subnet defined. % DHCPSRV_CFGMGR_OPTION_DUPLICATE multiple options with the code: %1 added to the subnet: %2 This warning message is issued on an attempt to configure multiple options with the same option code for the particular subnet. Adding multiple options is uncommon for DHCPv6, but it is not prohibited. % DHCPSRV_CFGMGR_RELAY_IP_ADDRESS_DEPRECATED "relay" uses "ip-address", which has been deprecated, please use "ip-addresses": %1 This is debug message issued when the "relay" element being parse contains "ip-address" rather than its replacement, "ip-addresses". The server will still honor the value but users are encouraged to move to the new list parameter. % DHCPSRV_CFGMGR_SOCKET_RAW_UNSUPPORTED use of raw sockets is unsupported on this OS, UDP sockets will be used This warning message is logged when the user specified that the DHCPv4 server should use the raw sockets to receive the DHCP messages and respond to the clients, but the use of raw sockets is not supported on the particular environment. The raw sockets are useful when the server must respond to the directly connected clients which don't have an address yet. If the raw sockets are not supported by Kea on the particular platform, Kea will fall back to use of the IP/UDP sockets. The responses to the directly connected clients will be broadcast. The responses to relayed clients will be unicast as usual. % DHCPSRV_CFGMGR_SOCKET_TYPE_DEFAULT "dhcp-socket-type" not specified , using default socket type %1 This informational message is logged when the administrator hasn't specified the "dhcp-socket-type" parameter in configuration for interfaces. In such case, the default socket type will be used. % DHCPSRV_CFGMGR_SOCKET_TYPE_SELECT using socket type %1 This informational message is logged when the DHCPv4 server selects the socket type to be used for all sockets that will be opened on the interfaces. Typically, the socket type is specified by the server administrator. If the socket type hasn't been specified, the raw socket will be selected. If the raw socket has been selected but Kea doesn't support the use of raw sockets on the particular OS, it will use an UDP socket instead. % DHCPSRV_CFGMGR_SUBNET4 retrieved subnet %1 for address hint %2 This is a debug message reporting that the DHCP configuration manager has returned the specified IPv4 subnet when given the address hint specified as the address is within the subnet. % DHCPSRV_CFGMGR_SUBNET4_ADDR selected subnet %1 for packet received by matching address %2 This is a debug message reporting that the DHCP configuration manager has returned the specified IPv4 subnet for a received packet. This particular subnet was selected, because an IPv4 address was matched which belonged to that subnet. % DHCPSRV_CFGMGR_SUBNET4_IFACE selected subnet %1 for packet received over interface %2 This is a debug message reporting that the DHCP configuration manager has returned the specified IPv4 subnet for a packet received over the given interface. This particular subnet was selected, because it was specified as being directly reachable over the given interface. (see 'interface' parameter in the subnet4 definition). % DHCPSRV_CFGMGR_SUBNET4_RELAY selected subnet %1, because of matching relay addr %2 This is a debug message reporting that the DHCP configuration manager has returned the specified IPv4 subnet, because detected relay agent address matches value specified for this subnet. % DHCPSRV_CFGMGR_SUBNET6 retrieved subnet %1 for address hint %2 This is a debug message reporting that the DHCP configuration manager has returned the specified IPv6 subnet when given the address hint specified as the address is within the subnet. % DHCPSRV_CFGMGR_SUBNET6_IFACE selected subnet %1 for packet received over interface %2 This is a debug message reporting that the DHCP configuration manager has returned the specified IPv6 subnet for a packet received over given interface. This particular subnet was selected, because it was specified as being directly reachable over given interface. (see 'interface' parameter in the subnet6 definition). % DHCPSRV_CFGMGR_SUBNET6_IFACE_ID selected subnet %1 (interface-id match) for incoming packet This is a debug message reporting that the DHCP configuration manager has returned the specified IPv6 subnet for a received packet. This particular subnet was selected, because value of interface-id option matched what was configured in the server's interface-id option for that selected subnet6. (see 'interface-id' parameter in the subnet6 definition). % DHCPSRV_CFGMGR_SUBNET6_RELAY selected subnet %1, because of matching relay addr %2 This is a debug message reporting that the DHCP configuration manager has returned the specified IPv6 subnet, because detected relay agent address matches value specified for this subnet. % DHCPSRV_CFGMGR_UNICAST_LINK_LOCAL specified link local address %1 for unicast traffic on interface %2 This warning message is logged when user specified a link-local address to receive unicast traffic. The warning message is issued because it is an uncommon use. % DHCPSRV_CFGMGR_UPDATE_SUBNET4 updating subnet %1 (result %2) A debug message reported when the DHCP configuration manager is updating the specified IPv4 subnet in its current configuration. Subnet ID and result (expected to be true) are displayed. % DHCPSRV_CFGMGR_UPDATE_SUBNET6 updating subnet %1 (result %2) A debug message reported when the DHCP configuration manager is replacing the specified IPv6 subnet in its current configuration. Subnet ID and result (expected to be true) are displayed. % DHCPSRV_CFGMGR_USE_ADDRESS listening on address %1, on interface %2 A message issued when the server is configured to listen on the explicitly specified IP address on the given interface. % DHCPSRV_CFGMGR_USE_UNICAST listening on unicast address %1, on interface %2 An info message issued when configuring the DHCP server to listen on the unicast address on the specific interface. % DHCPSRV_CLOSE_DB closing currently open %1 database This is a debug message, issued when the DHCP server closes the currently open lease database. It is issued at program shutdown and whenever the database access parameters are changed: in the latter case, the server closes the currently open database, and opens a database using the new parameters. % DHCPSRV_DEPRECATED This configuration is using a deprecated feature: %1 This warning is printed every time a deprecated feature (identified by the parameter) is used. A deprecated feature is functional now, but there will be a future Kea release where it will be completely removed. If you see this message it's not a reason for panic, but you should consider your long term strategy to eventually stop using the deprecated feature. % DHCPSRV_DHCP4O6_RECEIVED_BAD_PACKET received bad DHCPv4o6 packet: %1 A bad DHCPv4o6 packet was received. % DHCPSRV_DHCP_DDNS_ERROR_EXCEPTION error handler for DHCP_DDNS IO generated an expected exception: %1 This is an error message that occurs when an attempt to send a request to kea-dhcp-ddns fails there registered error handler threw an uncaught exception. This is a programmatic error which should not occur. By convention, the error handler should not propagate exceptions. Please report this error. % DHCPSRV_DHCP_DDNS_HANDLER_NULL error handler for DHCP_DDNS IO is not set. This is an error message that occurs when an attempt to send a request to kea-dhcp-ddns fails and there is no registered error handler. This is a programmatic error which should never occur and should be reported. % DHCPSRV_DHCP_DDNS_NCR_REJECTED NameChangeRequest rejected by the sender: %1, ncr: %2 This is an error message indicating that NameChangeSender used to deliver DDNS update requests to kea-dhcp-ddns rejected the request. This most likely cause is the sender's queue has reached maximum capacity. This would imply that requests are being generated faster than they can be delivered. % DHCPSRV_DHCP_DDNS_NCR_SENT NameChangeRequest sent to kea-dhcp-ddns: %1 A debug message issued when a NameChangeRequest has been successfully sent to kea-dhcp-ddns. % DHCPSRV_DHCP_DDNS_SENDER_STARTED NameChangeRequest sender has been started: %1 An informational message issued when a communication with kea-dhcp-ddns has been successfully started. % DHCPSRV_DHCP_DDNS_SENDER_STOPPED NameChangeRequest sender has been stopped. An informational message issued when a communication with kea-dhcp-ddns has been stopped. This normally occurs during reconfiguration and as part of normal shutdown. It may occur if kea-dhcp-ddns communications break down. % DHCPSRV_DHCP_DDNS_SUSPEND_UPDATES DHCP_DDNS updates are being suspended. This is a warning message indicating the DHCP_DDNS updates have been turned off. This should only occur if IO errors communicating with kea-dhcp-ddns have been experienced. Any such errors should have preceding entries in the log with details. No further attempts to communicate with kea-dhcp-ddns will be made without intervention. % DHCPSRV_HOOK_LEASE4_RECOVER_SKIP DHCPv4 lease %1 was not recovered from the declined state because a callout set the skip status. This debug message is printed when a callout installed on lease4_recover hook point set the next step status to SKIP. For this particular hook point, this indicates that the server should not recover the lease from declined state. The server will leave the lease as it is, in the declined state. The server will attempt to recover it the next time decline recovery procedure takes place. % DHCPSRV_HOOK_LEASE4_RENEW_SKIP DHCPv4 lease was not renewed because a callout set the skip flag. This debug message is printed when a callout installed on lease4_renew hook point set the skip flag. For this particular hook point, the setting of the flag by a callout instructs the server to not renew a lease. The server will use existing lease as it is, without extending its lifetime. % DHCPSRV_HOOK_LEASE4_SELECT_SKIP Lease4 creation was skipped, because of callout skip flag. This debug message is printed when a callout installed on lease4_select hook point sets the skip flag. It means that the server was told that no lease4 should be assigned. The server will not put that lease in its database and the client will get a NAK packet. % DHCPSRV_HOOK_LEASE6_EXTEND_SKIP DHCPv6 lease lifetime was not extended because a callout set the skip flag for message %1 This debug message is printed when a callout installed on lease6_renew or the lease6_rebind hook point set the skip flag. For this particular hook point, the setting of the flag by a callout instructs the server to not extend the lifetime for a lease. If the client requested renewal of multiple leases (by sending multiple IA options), the server will skip the renewal of the one in question and will proceed with other renewals as usual. % DHCPSRV_HOOK_LEASE6_RECOVER_SKIP DHCPv6 lease %1 was not recovered from declined state because a callout set the skip status. This debug message is printed when a callout installed on lease6_recover hook point set the next step status to SKIP. For this particular hook point, this indicates that the server should not recover the lease from declined state. The server will leave the lease as it is, in the declined state. The server will attempt to recover it the next time decline recovery procedure takes place. % DHCPSRV_HOOK_LEASE6_SELECT_SKIP Lease6 (non-temporary) creation was skipped, because of callout skip flag. This debug message is printed when a callout installed on lease6_select hook point sets the skip flag. It means that the server was told that no lease6 should be assigned. The server will not put that lease in its database and the client will get a NoAddrsAvail for that IA_NA option. % DHCPSRV_INVALID_ACCESS invalid database access string: %1 This is logged when an attempt has been made to parse a database access string and the attempt ended in error. The access string in question - which should be of the form 'keyword=value keyword=value...' is included in the message. % DHCPSRV_LEASE_SANITY_FAIL The lease %1 with subnet-id %2 failed subnet-id checks (%3). This warning message is printed when the lease being loaded does not match the configuration. Due to lease-checks value, the lease will be loaded, but it will most likely be unused by Kea, as there is no subnet that matches the IP address associated with the lease. % DHCPSRV_LEASE_SANITY_FAIL_DISCARD The lease %1 with subnet-id %2 failed subnet-id checks (%3) and was dropped. This warning message is printed when a lease was loaded, but Kea was told (by setting lease-checks parameter) to discard leases with inconsistent data. The lease was discarded, because either there is no subnet configured with matching subnet-id or the address of the lease does not belong to the subnet. % DHCPSRV_LEASE_SANITY_FIXED The lease %1 with subnet-id %2 failed subnet-id checks, but was corrected to subnet-id %3. This informational message is printed when a lease was loaded, but had incorrect subnet-id value. The lease-checks parameter was set to a value that told Kea to try to correct the problem. There is a matching subnet, so Kea updated subnet-id and loaded the lease successfully. % DHCPSRV_MEMFILE_ADD_ADDR4 adding IPv4 lease with address %1 A debug message issued when the server is about to add an IPv4 lease with the specified address to the memory file backend database. % DHCPSRV_MEMFILE_ADD_ADDR6 adding IPv6 lease with address %1 A debug message issued when the server is about to add an IPv6 lease with the specified address to the memory file backend database. % DHCPSRV_MEMFILE_BEGIN_TRANSACTION committing to memory file database The code has issued a begin transaction call. For the memory file database, this is a no-op. % DHCPSRV_MEMFILE_COMMIT committing to memory file database The code has issued a commit call. For the memory file database, this is a no-op. % DHCPSRV_MEMFILE_CONVERTING_LEASE_FILES running LFC now to convert lease files to the current schema: %1.%2 A warning message issued when the server has detected lease files that need to be either upgraded or downgraded to match the server's schema, and that the server is automatically running the LFC process to perform the conversion. This should only occur the first time the server is launched following a Kea installation upgrade (or downgrade). % DHCPSRV_MEMFILE_DB opening memory file lease database: %1 This informational message is logged when a DHCP server (either V4 or V6) is about to open a memory file lease database. The parameters of the connection including database name and username needed to access it (but not the password if any) are logged. % DHCPSRV_MEMFILE_DELETE_ADDR deleting lease for address %1 A debug message issued when the server is attempting to delete a lease for the specified address from the memory file database for the specified address. % DHCPSRV_MEMFILE_DELETE_EXPIRED_RECLAIMED4 deleting reclaimed IPv4 leases that expired more than %1 seconds ago A debug message issued when the server is removing reclaimed DHCPv4 leases which have expired longer than a specified period of time. The argument is the amount of time Kea waits after a reclaimed lease expires before considering its removal. % DHCPSRV_MEMFILE_DELETE_EXPIRED_RECLAIMED6 deleting reclaimed IPv6 leases that expired more than %1 seconds ago A debug message issued when the server is removing reclaimed DHCPv6 leases which have expired longer than a specified period of time. The argument is the amount of time Kea waits after a reclaimed lease expires before considering its removal. % DHCPSRV_MEMFILE_DELETE_EXPIRED_RECLAIMED_START starting deletion of %1 expired-reclaimed leases A debug message issued when the server has found expired-reclaimed leases to be removed. The number of leases to be removed is logged in the message. % DHCPSRV_MEMFILE_GET4 obtaining all IPv4 leases A debug message issued when the server is attempting to obtain all IPv4 leases from the memory file database. % DHCPSRV_MEMFILE_GET6 obtaining all IPv6 leases A debug message issued when the server is attempting to obtain all IPv6 leases from the memory file database. % DHCPSRV_MEMFILE_GET6_DUID obtaining IPv6 leases for DUID %1 A debug message issued when the server is attempting to obtain IPv6 leases from the memory file database for the DUID. % DHCPSRV_MEMFILE_GET_ADDR4 obtaining IPv4 lease for address %1 A debug message issued when the server is attempting to obtain an IPv4 lease from the memory file database for the specified address. % DHCPSRV_MEMFILE_GET_ADDR6 obtaining IPv6 lease for address %1 and lease type %2 A debug message issued when the server is attempting to obtain an IPv6 lease from the memory file database for the specified address. % DHCPSRV_MEMFILE_GET_CLIENTID obtaining IPv4 leases for client ID %1 A debug message issued when the server is attempting to obtain a set of IPv4 leases from the memory file database for a client with the specified client identification. % DHCPSRV_MEMFILE_GET_EXPIRED4 obtaining maximum %1 of expired IPv4 leases A debug message issued when the server is attempting to obtain expired IPv4 leases to reclaim them. The maximum number of leases to be retrieved is logged in the message. % DHCPSRV_MEMFILE_GET_EXPIRED6 obtaining maximum %1 of expired IPv6 leases A debug message issued when the server is attempting to obtain expired IPv6 leases to reclaim them. The maximum number of leases to be retrieved is logged in the message. % DHCPSRV_MEMFILE_GET_HOSTNAME4 obtaining IPv4 leases for hostname %1 A debug message issued when the server is attempting to obtain a set of IPv4 leases from the memory file database for a client with the specified hostname. % DHCPSRV_MEMFILE_GET_HOSTNAME6 obtaining IPv6 leases for hostname %1 A debug message issued when the server is attempting to obtain a set of IPv6 leases from the memory file database for a client with the specified hostname. % DHCPSRV_MEMFILE_GET_HWADDR obtaining IPv4 leases for hardware address %1 A debug message issued when the server is attempting to obtain a set of IPv4 leases from the memory file database for a client with the specified hardware address. % DHCPSRV_MEMFILE_GET_IAID_DUID obtaining IPv6 leases for IAID %1 and DUID %2 and lease type %3 A debug message issued when the server is attempting to obtain a set of IPv6 leases from the memory file database for a client with the specified IAID (Identity Association ID) and DUID (DHCP Unique Identifier). % DHCPSRV_MEMFILE_GET_IAID_SUBID_DUID obtaining IPv6 leases for IAID %1, Subnet ID %2, DUID %3 and lease type %4 A debug message issued when the server is attempting to obtain an IPv6 lease from the memory file database for a client with the specified IAID (Identity Association ID), Subnet ID and DUID (DHCP Unique Identifier). % DHCPSRV_MEMFILE_GET_PAGE4 obtaining at most %1 IPv4 leases starting from address %2 A debug message issued when the server is attempting to obtain a page of leases beginning with the specified address. % DHCPSRV_MEMFILE_GET_PAGE6 obtaining at most %1 IPv6 leases starting from address %2 A debug message issued when the server is attempting to obtain a page of leases beginning with the specified address. % DHCPSRV_MEMFILE_GET_SUBID4 obtaining IPv4 leases for subnet ID %1 A debug message issued when the server is attempting to obtain all IPv4 leases for a given subnet identifier from the memory file database. % DHCPSRV_MEMFILE_GET_SUBID6 obtaining IPv6 leases for subnet ID %1 A debug message issued when the server is attempting to obtain all IPv6 leases for a given subnet identifier from the memory file database. % DHCPSRV_MEMFILE_GET_SUBID_CLIENTID obtaining IPv4 lease for subnet ID %1 and client ID %2 A debug message issued when the server is attempting to obtain an IPv4 lease from the memory file database for a client with the specified subnet ID and client ID. % DHCPSRV_MEMFILE_GET_SUBID_HWADDR obtaining IPv4 lease for subnet ID %1 and hardware address %2 A debug message issued when the server is attempting to obtain an IPv4 lease from the memory file database for a client with the specified subnet ID and hardware address. % DHCPSRV_MEMFILE_GET_VERSION obtaining schema version information A debug message issued when the server is about to obtain schema version information from the memory file database. % DHCPSRV_MEMFILE_LEASE_FILE_LOAD loading leases from file %1 An info message issued when the server is about to start reading DHCP leases from the lease file. All leases currently held in the memory will be replaced by those read from the file. % DHCPSRV_MEMFILE_LEASE_LOAD loading lease %1 A debug message issued when DHCP lease is being loaded from the file to memory. % DHCPSRV_MEMFILE_LEASE_LOAD_ROW_ERROR discarding row %1, error: %2 An error message issued if the DHCP lease being loaded from the given row of the lease file fails. The log message should contain the specific reason the row was discarded. The server continues loading the remaining data. This may indicate a corrupt lease file. % DHCPSRV_MEMFILE_LFC_EXECUTE executing Lease File Cleanup using: %1 An informational message issued when the memfile lease database backend starts a new process to perform Lease File Cleanup. % DHCPSRV_MEMFILE_LFC_LEASE_FILE_RENAME_FAIL failed to rename the current lease file %1 to %2, reason: %3 An error message logged when the memfile lease database backend fails to move the current lease file to a new file on which the cleanup should be performed. This effectively means that the lease file cleanup does not take place. % DHCPSRV_MEMFILE_LFC_LEASE_FILE_REOPEN_FAIL failed to reopen lease file %1 after preparing input file for lease file cleanup, reason: %2, new leases will not persist! An error message logged when the memfile lease database backend failed to re-open or re-create the lease file after renaming the lease file for lease file cleanup. The server continues to operate but leases do not persist to disk. % DHCPSRV_MEMFILE_LFC_SETUP setting up the Lease File Cleanup interval to %1 sec An informational message logged when the memfile lease database backend configures the LFC to be executed periodically. The argument holds the interval in seconds in which the LFC will be executed. % DHCPSRV_MEMFILE_LFC_SPAWN_FAIL lease file cleanup failed to run because kea-lfc process couldn't be spawned This error message is logged when the Kea server fails to run kea-lfc, the program that cleans up the lease file. The server will try again the next time a lease file cleanup is scheduled. Although this message should not appear and the reason why it did investigated, the occasional failure to start the lease file cleanup will not impact operations. Should the failure persist however, the size of the lease file will increase without bound. % DHCPSRV_MEMFILE_LFC_START starting Lease File Cleanup An informational message issued when the Memfile lease database backend starts the periodic Lease File Cleanup. % DHCPSRV_MEMFILE_LFC_UNREGISTER_TIMER_FAILED failed to unregister timer 'memfile-lfc': %1 This debug message is logged when Memfile backend fails to unregister timer used for lease file cleanup scheduling. There are several reasons why this could occur, although the most likely cause is that the system is being shut down and some other component has unregistered the timer. The message includes the reason for this error. % DHCPSRV_MEMFILE_NEEDS_DOWNGRADING version of lease file: %1 schema is later than version %2 A warning message issued when the schema of the lease file loaded by the server is newer than the memfile schema of the server. The server converts the lease data from newer schemas to its schema as it is read, therefore the lease information in use by the server will be correct. Note though, that any data stored in newer schema fields will be dropped. What remains is for the file itself to be rewritten using the current schema. % DHCPSRV_MEMFILE_NEEDS_UPGRADING version of lease file: %1 schema is earlier than version %2 A warning message issued when the schema of the lease file loaded by the server pre-dates the memfile schema of the server. Note that the server converts the lease data from older schemas to the current schema as it is read, therefore the lease information in use by the server will be correct. What remains is for the file itself to be rewritten using the current schema. % DHCPSRV_MEMFILE_NO_STORAGE running in non-persistent mode, leases will be lost after restart A warning message issued when writes of leases to disk have been disabled in the configuration. This mode is useful for some kinds of performance testing but should not be enabled in normal circumstances. Non-persistence mode is enabled when 'persist4=no persist6=no' parameters are specified in the database access string. % DHCPSRV_MEMFILE_READ_HWADDR_FAIL failed to read hardware address from lease file: %1 A warning message issued when read attempt of the hardware address stored in a disk file failed. The parameter should provide the exact nature of the failure. The database read will continue, but that particular lease will no longer have hardware address associated with it. % DHCPSRV_MEMFILE_ROLLBACK rolling back memory file database The code has issued a rollback call. For the memory file database, this is a no-op. % DHCPSRV_MEMFILE_UPDATE_ADDR4 updating IPv4 lease for address %1 A debug message issued when the server is attempting to update IPv4 lease from the memory file database for the specified address. % DHCPSRV_MEMFILE_UPDATE_ADDR6 updating IPv6 lease for address %1 A debug message issued when the server is attempting to update IPv6 lease from the memory file database for the specified address. % DHCPSRV_MEMFILE_WIPE_LEASES4 removing all IPv4 leases from subnet %1 This informational message is printed when removal of all leases from specified IPv4 subnet is commencing. This is a result of receiving administrative command. % DHCPSRV_MEMFILE_WIPE_LEASES4_FINISHED removing all IPv4 leases from subnet %1 finished, removed %2 leases This informational message is printed when removal of all leases from a specified IPv4 subnet has finished. The number of removed leases is printed. % DHCPSRV_MEMFILE_WIPE_LEASES6 removing all IPv6 leases from subnet %1 This informational message is printed when removal of all leases from specified IPv6 subnet is commencing. This is a result of receiving administrative command. % DHCPSRV_MEMFILE_WIPE_LEASES6_FINISHED removing all IPv6 leases from subnet %1 finished, removed %2 leases This informational message is printed when removal of all leases from a specified IPv6 subnet has finished. The number of removed leases is printed. % DHCPSRV_MULTIPLE_RAW_SOCKETS_PER_IFACE current configuration will result in opening multiple broadcast capable sockets on some interfaces and some DHCP messages may be duplicated A warning message issued when the current configuration indicates that multiple sockets, capable of receiving broadcast traffic, will be opened on some of the interfaces. It must be noted that this may lead to receiving and processing the same DHCP message multiple times, as it will be received by each socket individually. % DHCPSRV_MYSQL_ADD_ADDR4 adding IPv4 lease with address %1 A debug message issued when the server is about to add an IPv4 lease with the specified address to the MySQL backend database. % DHCPSRV_MYSQL_ADD_ADDR6 adding IPv6 lease with address %1, lease type %2 A debug message issued when the server is about to add an IPv6 lease with the specified address to the MySQL backend database. % DHCPSRV_MYSQL_BEGIN_TRANSACTION committing to MySQL database The code has issued a begin transaction call. % DHCPSRV_MYSQL_COMMIT committing to MySQL database The code has issued a commit call. All outstanding transactions will be committed to the database. Note that depending on the MySQL settings, the commit may not include a write to disk. % DHCPSRV_MYSQL_DB opening MySQL lease database: %1 This informational message is logged when a DHCP server (either V4 or V6) is about to open a MySQL lease database. The parameters of the connection including database name and username needed to access it (but not the password if any) are logged. % DHCPSRV_MYSQL_DELETED_EXPIRED_RECLAIMED deleted %1 reclaimed leases from the database A debug message issued when the server has removed a number of reclaimed leases from the database. The number of removed leases is included in the message. % DHCPSRV_MYSQL_DELETE_ADDR deleting lease for address %1 A debug message issued when the server is attempting to delete a lease for the specified address from the MySQL database for the specified address. % DHCPSRV_MYSQL_DELETE_EXPIRED_RECLAIMED4 deleting reclaimed IPv4 leases that expired more than %1 seconds ago A debug message issued when the server is removing reclaimed DHCPv4 leases which have expired longer than a specified period of time. The argument is the amount of time Kea waits after a reclaimed lease expires before considering its removal. % DHCPSRV_MYSQL_DELETE_EXPIRED_RECLAIMED6 deleting reclaimed IPv6 leases that expired more than %1 seconds ago A debug message issued when the server is removing reclaimed DHCPv6 leases which have expired longer than a specified period of time. The argument is the amount of time Kea waits after a reclaimed lease expires before considering its removal. % DHCPSRV_MYSQL_FATAL_ERROR Unrecoverable MySQL error occurred: %1 for <%2>, reason: %3 (error code: %4). An error message indicating that communication with the MySQL database server has been lost. If automatic recovery has been enabled, then the server will attempt to recover the connectivity. If not the server will exit with a non-zero exit code. The cause of such an error is most likely a network issue or the MySQL server has gone down. % DHCPSRV_MYSQL_GET4 obtaining all IPv4 leases A debug message issued when the server is attempting to obtain all IPv4 leases from the MySQL database. % DHCPSRV_MYSQL_GET6 obtaining all IPv6 leases A debug message issued when the server is attempting to obtain all IPv6 leases from the MySQL database. % DHCPSRV_MYSQL_GET_ADDR4 obtaining IPv4 lease for address %1 A debug message issued when the server is attempting to obtain an IPv4 lease from the MySQL database for the specified address. % DHCPSRV_MYSQL_GET_ADDR6 obtaining IPv6 lease for address %1, lease type %2 A debug message issued when the server is attempting to obtain an IPv6 lease from the MySQL database for the specified address. % DHCPSRV_MYSQL_GET_CLIENTID obtaining IPv4 leases for client ID %1 A debug message issued when the server is attempting to obtain a set of IPv4 leases from the MySQL database for a client with the specified client identification. % DHCPSRV_MYSQL_GET_DUID obtaining IPv6 lease for duid %1, A debug message issued when the server is attempting to obtain an IPv6 lease from the MySQL database for the specified duid. % DHCPSRV_MYSQL_GET_EXPIRED4 obtaining maximum %1 of expired IPv4 leases A debug message issued when the server is attempting to obtain expired IPv4 leases to reclaim them. The maximum number of leases to be retrieved is logged in the message. % DHCPSRV_MYSQL_GET_EXPIRED6 obtaining maximum %1 of expired IPv6 leases A debug message issued when the server is attempting to obtain expired IPv6 leases to reclaim them. The maximum number of leases to be retrieved is logged in the message. % DHCPSRV_MYSQL_GET_HOSTNAME4 obtaining IPv4 leases for hostname %1 A debug message issued when the server is attempting to obtain a set of IPv4 leases from the MySQL database for a client with the specified hostname. % DHCPSRV_MYSQL_GET_HOSTNAME6 obtaining IPv6 leases for hostname %1 A debug message issued when the server is attempting to obtain a set of IPv6 leases from the MySQL database for a client with the specified hostname. % DHCPSRV_MYSQL_GET_HWADDR obtaining IPv4 leases for hardware address %1 A debug message issued when the server is attempting to obtain a set of IPv4 leases from the MySQL database for a client with the specified hardware address. % DHCPSRV_MYSQL_GET_IAID_DUID obtaining IPv6 leases for IAID %1, DUID %2, lease type %3 A debug message issued when the server is attempting to obtain a set of IPv6 leases from the MySQL database for a client with the specified IAID (Identity Association ID) and DUID (DHCP Unique Identifier). % DHCPSRV_MYSQL_GET_IAID_SUBID_DUID obtaining IPv6 leases for IAID %1, Subnet ID %2, DUID %3, lease type %4 A debug message issued when the server is attempting to obtain an IPv6 lease from the MySQL database for a client with the specified IAID (Identity Association ID), Subnet ID and DUID (DHCP Unique Identifier). % DHCPSRV_MYSQL_GET_PAGE4 obtaining at most %1 IPv4 leases starting from address %2 A debug message issued when the server is attempting to obtain a page of leases beginning with the specified address. % DHCPSRV_MYSQL_GET_PAGE6 obtaining at most %1 IPv6 leases starting from address %2 A debug message issued when the server is attempting to obtain a page of leases beginning with the specified address. % DHCPSRV_MYSQL_GET_SUBID4 obtaining IPv4 leases for subnet ID %1 A debug message issued when the server is attempting to obtain all IPv4 leases for a given subnet identifier from the MySQL database. % DHCPSRV_MYSQL_GET_SUBID6 obtaining IPv6 leases for subnet ID %1 A debug message issued when the server is attempting to obtain all IPv6 leases for a given subnet identifier from the MySQL database. % DHCPSRV_MYSQL_GET_SUBID_CLIENTID obtaining IPv4 lease for subnet ID %1 and client ID %2 A debug message issued when the server is attempting to obtain an IPv4 lease from the MySQL database for a client with the specified subnet ID and client ID. % DHCPSRV_MYSQL_GET_SUBID_HWADDR obtaining IPv4 lease for subnet ID %1 and hardware address %2 A debug message issued when the server is attempting to obtain an IPv4 lease from the MySQL database for a client with the specified subnet ID and hardware address. % DHCPSRV_MYSQL_GET_VERSION obtaining schema version information A debug message issued when the server is about to obtain schema version information from the MySQL database. % DHCPSRV_MYSQL_HOST_DB opening MySQL hosts database: %1 This informational message is logged when a DHCP server (either V4 or V6) is about to open a MySQL hosts database. The parameters of the connection including database name and username needed to access it (but not the password if any) are logged. % DHCPSRV_MYSQL_HOST_DB_GET_VERSION obtaining schema version information for the MySQL hosts database A debug message issued when the server is about to obtain schema version information from the MySQL hosts database. % DHCPSRV_MYSQL_HOST_DB_READONLY MySQL host database opened for read access only This informational message is issued when the user has configured the MySQL database in read-only mode. Kea will not be able to insert or modify host reservations but will be able to retrieve existing ones and assign them to the clients communicating with the server. % DHCPSRV_MYSQL_HOST_DB_RECONNECT_ATTEMPT_FAILED database reconnect failed: %1 An error message issued when an attempt to reconnect has failed. % DHCPSRV_MYSQL_HOST_DB_RECONNECT_ATTEMPT_SCHEDULE scheduling attempt %1 of %2 in %3 milliseconds An info message issued when the server is scheduling the next attempt to reconnect to the database. This occurs when the server has lost database connectivity and is attempting to reconnect automatically. % DHCPSRV_MYSQL_HOST_DB_RECONNECT_FAILED maximum number of database reconnect attempts: %1, has been exhausted without success An error message issued when the server failed to reconnect. Loss of connectivity is typically a network or database server issue. % DHCPSRV_MYSQL_LEASE_DB_RECONNECT_ATTEMPT_FAILED database reconnect failed: %1 An error message issued when an attempt to reconnect has failed. % DHCPSRV_MYSQL_LEASE_DB_RECONNECT_ATTEMPT_SCHEDULE scheduling attempt %1 of %2 in %3 milliseconds An info message issued when the server is scheduling the next attempt to reconnect to the database. This occurs when the server has lost database connectivity and is attempting to reconnect automatically. % DHCPSRV_MYSQL_LEASE_DB_RECONNECT_FAILED maximum number of database reconnect attempts: %1, has been exhausted without success An error message issued when the server failed to reconnect. Loss of connectivity is typically a network or database server issue. % DHCPSRV_MYSQL_NEGATIVE_LEASES_STAT recount of leases returned a negative value This warning message is issued when the recount of leases using counters in the MySQL database returned a negative value. This shows a problem which can be fixed only by an offline direct recount on the database. This message is issued only once. % DHCPSRV_MYSQL_NO_TLS TLS was required but is not used This error message is issued when TLS for the connection was required but TLS is not used. % DHCPSRV_MYSQL_ROLLBACK rolling back MySQL database The code has issued a rollback call. All outstanding transaction will be rolled back and not committed to the database. % DHCPSRV_MYSQL_START_TRANSACTION starting new MySQL transaction A debug message issued when a new MySQL transaction is being started. This message is typically not issued when inserting data into a single table because the server doesn't explicitly start transactions in this case. This message is issued when data is inserted into multiple tables with multiple INSERT statements and there may be a need to rollback the whole transaction if any of these INSERT statements fail. % DHCPSRV_MYSQL_TLS_CIPHER TLS cipher: %1 A debug message issued when a new MySQL connected is created with TLS. The TLS cipher name is logged. % DHCPSRV_MYSQL_UPDATE_ADDR4 updating IPv4 lease for address %1 A debug message issued when the server is attempting to update IPv4 lease from the MySQL database for the specified address. % DHCPSRV_MYSQL_UPDATE_ADDR6 updating IPv6 lease for address %1, lease type %2 A debug message issued when the server is attempting to update IPv6 lease from the MySQL database for the specified address. % DHCPSRV_NOTYPE_DB no 'type' keyword to determine database backend: %1 This is an error message, logged when an attempt has been made to access a database backend, but where no 'type' keyword has been included in the access string. The access string (less any passwords) is included in the message. % DHCPSRV_NO_SOCKETS_OPEN no interface configured to listen to DHCP traffic This warning message is issued when the current server configuration specifies no interfaces that the server should listen on, or when the specified interfaces are not configured to receive the traffic. % DHCPSRV_OPEN_SOCKET_FAIL failed to open socket: %1 A warning message issued when IfaceMgr fails to open and bind a socket. The reason for the failure is appended as an argument of the log message. % DHCPSRV_PGSQL_ADD_ADDR4 adding IPv4 lease with address %1 A debug message issued when the server is about to add an IPv4 lease with the specified address to the PostgreSQL backend database. % DHCPSRV_PGSQL_ADD_ADDR6 adding IPv6 lease with address %1, lease type %2 A debug message issued when the server is about to add an IPv6 lease with the specified address to the PostgreSQL backend database. % DHCPSRV_PGSQL_BEGIN_TRANSACTION committing to PostgreSQL database The code has issued a begin transaction call. % DHCPSRV_PGSQL_COMMIT committing to PostgreSQL database The code has issued a commit call. All outstanding transactions will be committed to the database. Note that depending on the PostgreSQL settings, the commit may not include a write to disk. % DHCPSRV_PGSQL_DB opening PostgreSQL lease database: %1 This informational message is logged when a DHCP server (either V4 or V6) is about to open a PostgreSQL lease database. The parameters of the connection including database name and username needed to access it (but not the password if any) are logged. % DHCPSRV_PGSQL_DEALLOC_ERROR An error occurred deallocating SQL statements while closing the PostgreSQL lease database: %1 This is an error message issued when a DHCP server (either V4 or V6) experienced and error freeing database SQL resources as part of closing its connection to the PostgreSQL database. The connection is closed as part of normal server shutdown. This error is most likely a programmatic issue that is highly unlikely to occur or negatively impact server operation. % DHCPSRV_PGSQL_DELETE_ADDR deleting lease for address %1 A debug message issued when the server is attempting to delete a lease for the specified address from the PostgreSQL database for the specified address. % DHCPSRV_PGSQL_DELETE_EXPIRED_RECLAIMED4 deleting reclaimed IPv4 leases that expired more than %1 seconds ago A debug message issued when the server is removing reclaimed DHCPv4 leases which have expired longer than a specified period of time. The argument is the amount of time Kea waits after a reclaimed lease expires before considering its removal. % DHCPSRV_PGSQL_DELETE_EXPIRED_RECLAIMED6 deleting reclaimed IPv6 leases that expired more than %1 seconds ago A debug message issued when the server is removing reclaimed DHCPv6 leases which have expired longer than a specified period of time. The argument is the amount of time Kea waits after a reclaimed lease expires before considering its removal. % DHCPSRV_PGSQL_FATAL_ERROR Unrecoverable PostgreSQL error occurred: Statement: <%1>, reason: %2 (error code: %3). An error message indicating that communication with the PostgreSQL database server has been lost. If automatic recovery has been enabled, then the server will attempt to recover the connectivity. If not the server will exit with a non-zero exit code. The cause of such an error is most likely a network issue or the PostgreSQL server has gone down. % DHCPSRV_PGSQL_GET4 obtaining all IPv4 leases A debug message issued when the server is attempting to obtain all IPv4 leases from the PostgreSQL database. % DHCPSRV_PGSQL_GET6 obtaining all IPv6 leases A debug message issued when the server is attempting to obtain all IPv6 leases from the PostgreSQL database. % DHCPSRV_PGSQL_GET_ADDR4 obtaining IPv4 lease for address %1 A debug message issued when the server is attempting to obtain an IPv4 lease from the PostgreSQL database for the specified address. % DHCPSRV_PGSQL_GET_ADDR6 obtaining IPv6 lease for address %1 (lease type %2) A debug message issued when the server is attempting to obtain an IPv6 lease from the PostgreSQL database for the specified address. % DHCPSRV_PGSQL_GET_CLIENTID obtaining IPv4 leases for client ID %1 A debug message issued when the server is attempting to obtain a set of IPv4 leases from the PostgreSQL database for a client with the specified client identification. % DHCPSRV_PGSQL_GET_DUID obtaining IPv6 leases for DUID %1, A debug message issued when the server is attempting to obtain a set of IPv6 leases from the PostgreSQL database for a client with the specified DUID (DHCP Unique Identifier). % DHCPSRV_PGSQL_GET_EXPIRED4 obtaining maximum %1 of expired IPv4 leases A debug message issued when the server is attempting to obtain expired IPv4 leases to reclaim them. The maximum number of leases to be retrieved is logged in the message. % DHCPSRV_PGSQL_GET_EXPIRED6 obtaining maximum %1 of expired IPv6 leases A debug message issued when the server is attempting to obtain expired IPv6 leases to reclaim them. The maximum number of leases to be retrieved is logged in the message. % DHCPSRV_PGSQL_GET_HOSTNAME4 obtaining IPv4 leases for hostname %1 A debug message issued when the server is attempting to obtain a set of IPv4 leases from the PostgreSQL database for a client with the specified hostname. % DHCPSRV_PGSQL_GET_HOSTNAME6 obtaining IPv6 leases for hostname %1 A debug message issued when the server is attempting to obtain a set of IPv6 leases from the PostgreSQL database for a client with the specified hostname. % DHCPSRV_PGSQL_GET_HWADDR obtaining IPv4 leases for hardware address %1 A debug message issued when the server is attempting to obtain a set of IPv4 leases from the PostgreSQL database for a client with the specified hardware address. % DHCPSRV_PGSQL_GET_IAID_DUID obtaining IPv4 leases for IAID %1 and DUID %2, lease type %3 A debug message issued when the server is attempting to obtain a set of IPv6 leases from the PostgreSQL database for a client with the specified IAID (Identity Association ID) and DUID (DHCP Unique Identifier). % DHCPSRV_PGSQL_GET_IAID_SUBID_DUID obtaining IPv4 leases for IAID %1, Subnet ID %2, DUID %3, and lease type %4 A debug message issued when the server is attempting to obtain an IPv6 lease from the PostgreSQL database for a client with the specified IAID (Identity Association ID), Subnet ID and DUID (DHCP Unique Identifier). % DHCPSRV_PGSQL_GET_PAGE4 obtaining at most %1 IPv4 leases starting from address %2 A debug message issued when the server is attempting to obtain a page of leases beginning with the specified address. % DHCPSRV_PGSQL_GET_PAGE6 obtaining at most %1 IPv6 leases starting from address %2 A debug message issued when the server is attempting to obtain a page of leases beginning with the specified address. % DHCPSRV_PGSQL_GET_SUBID4 obtaining IPv4 leases for subnet ID %1 A debug message issued when the server is attempting to obtain all IPv4 leases for a given subnet identifier from the PostgreSQL database. % DHCPSRV_PGSQL_GET_SUBID6 obtaining IPv6 leases for subnet ID %1 A debug message issued when the server is attempting to obtain all IPv6 leases for a given subnet identifier from the PostgreSQL database. % DHCPSRV_PGSQL_GET_SUBID_CLIENTID obtaining IPv4 lease for subnet ID %1 and client ID %2 A debug message issued when the server is attempting to obtain an IPv4 lease from the PostgreSQL database for a client with the specified subnet ID and client ID. % DHCPSRV_PGSQL_GET_SUBID_HWADDR obtaining IPv4 lease for subnet ID %1 and hardware address %2 A debug message issued when the server is attempting to obtain an IPv4 lease from the PostgreSQL database for a client with the specified subnet ID and hardware address. % DHCPSRV_PGSQL_GET_VERSION obtaining schema version information A debug message issued when the server is about to obtain schema version information from the PostgreSQL database. % DHCPSRV_PGSQL_HOST_DB opening PostgreSQL hosts database: %1 This informational message is logged when a DHCP server (either V4 or V6) is about to open a PostgreSQL hosts database. The parameters of the connection including database name and username needed to access it (but not the password if any) are logged. % DHCPSRV_PGSQL_HOST_DB_GET_VERSION obtaining schema version information for the PostgreSQL hosts database A debug message issued when the server is about to obtain schema version information from the PostgreSQL hosts database. % DHCPSRV_PGSQL_HOST_DB_READONLY PostgreSQL host database opened for read access only This informational message is issued when the user has configured the PostgreSQL database in read-only mode. Kea will not be able to insert or modify host reservations but will be able to retrieve existing ones and assign them to the clients communicating with the server. % DHCPSRV_PGSQL_HOST_DB_RECONNECT_ATTEMPT_FAILED database reconnect failed: %1 An error message issued when an attempt to reconnect has failed. % DHCPSRV_PGSQL_HOST_DB_RECONNECT_ATTEMPT_SCHEDULE scheduling attempt %1 of %2 in %3 milliseconds An info message issued when the server is scheduling the next attempt to reconnect to the database. This occurs when the server has lost database connectivity and is attempting to reconnect automatically. % DHCPSRV_PGSQL_HOST_DB_RECONNECT_FAILED maximum number of database reconnect attempts: %1, has been exhausted without success An error message issued when the server failed to reconnect. Loss of connectivity is typically a network or database server issue. % DHCPSRV_PGSQL_LEASE_DB_RECONNECT_ATTEMPT_FAILED database reconnect failed: %1 An error message issued when an attempt to reconnect has failed. % DHCPSRV_PGSQL_LEASE_DB_RECONNECT_ATTEMPT_SCHEDULE scheduling attempt %1 of %2 in %3 milliseconds An info message issued when the server is scheduling the next attempt to reconnect to the database. This occurs when the server has lost database connectivity and is attempting to reconnect automatically. % DHCPSRV_PGSQL_LEASE_DB_RECONNECT_FAILED maximum number of database reconnect attempts: %1, has been exhausted without success An error message issued when the server failed to reconnect. Loss of connectivity is typically a network or database server issue. % DHCPSRV_PGSQL_NEGATIVE_LEASES_STAT recount of leases returned a negative value This warning message is issued when the recount of leases using counters in the PostgreSQL database returned a negative value. This shows a problem which can be fixed only by an offline direct recount on the database. This message is issued only once. % DHCPSRV_PGSQL_NO_TLS_SUPPORT Attempt to configure TLS (unsupported for PostgreSQL): %1 This error message is printed when TLS support was required in the Kea configuration: Kea was built with this feature disabled for PostgreSQL. The parameters of the connection are logged. % DHCPSRV_PGSQL_ROLLBACK rolling back PostgreSQL database The code has issued a rollback call. All outstanding transaction will be rolled back and not committed to the database. % DHCPSRV_PGSQL_START_TRANSACTION starting a new PostgreSQL transaction A debug message issued when a new PostgreSQL transaction is being started. This message is typically not issued when inserting data into a single table because the server doesn't explicitly start transactions in this case. This message is issued when data is inserted into multiple tables with multiple INSERT statements and there may be a need to rollback the whole transaction if any of these INSERT statements fail. % DHCPSRV_PGSQL_TLS_SUPPORT Attempt to configure TLS: %1 This informational message is printed when TLS support was required in the Kea configuration: The TLS support in PostgreSQL will be initialized but its configuration is fully managed outside the C API. The parameters of the connection are logged. % DHCPSRV_PGSQL_UPDATE_ADDR4 updating IPv4 lease for address %1 A debug message issued when the server is attempting to update IPv4 lease from the PostgreSQL database for the specified address. % DHCPSRV_PGSQL_UPDATE_ADDR6 updating IPv6 lease for address %1, lease type %2 A debug message issued when the server is attempting to update IPv6 lease from the PostgreSQL database for the specified address. % DHCPSRV_QUEUE_NCR %1: Name change request to %2 DNS entry queued: %3 A debug message which is logged when the NameChangeRequest to add or remove a DNS entries for a particular lease has been queued. The first argument includes the client identification information. The second argument indicates whether the DNS entry is to be added or removed. The third argument carries the details of the NameChangeRequest. % DHCPSRV_QUEUE_NCR_FAILED %1: queuing %2 name change request failed for lease %3: %4 This error message is logged when sending a NameChangeRequest to DHCP DDNS failed. The first argument includes the client identification information. The second argument indicates whether the DNS entry is to be added or removed. The third argument specifies the leased address. The last argument provides the reason for failure. % DHCPSRV_QUEUE_NCR_SKIP %1: skip queuing name change request for lease: %2 This debug message is issued when the server decides to not queue the name change request because the lease doesn't include the FQDN, the forward and reverse update is disabled for this lease or the DNS updates are disabled in the configuration. The first argument includes the client identification information. The second argument includes the leased address. % DHCPSRV_SUBNET4O6_SELECT_FAILED Failed to select any subnet for the DHCPv4o6 packet A debug message issued when the server was unable to select any subnet for the DHCPv4o6 packet. % DHCPSRV_SUBNET4_SELECT_BY_ADDRESS_NO_MATCH No subnet matches address: %1 A debug message issued when the server was unable to select a subnet using the specified address. % DHCPSRV_SUBNET4_SELECT_BY_INTERFACE_NO_MATCH No subnet matches interface: %1 A debug message issued when the server was unable to select a subnet using the specified interface name. % DHCPSRV_SUBNET4_SELECT_BY_RELAY_ADDRESS_NO_MATCH No subnet matches relay address: %1 A debug message issued when the server was unable to select a subnet using the specified relay address. % DHCPSRV_SUBNET4_SELECT_NO_RAI_OPTIONS No RAI options found to use for subnet selection. A debug message issued by the server when the client query does not include RAI options suitable for use with subnet selection. % DHCPSRV_SUBNET4_SELECT_NO_RELAY_ADDRESS Relay address (giaddr) in client packet is empty. A debug message issued when no relay address was specified to use for subnet selection. % DHCPSRV_SUBNET4_SELECT_NO_USABLE_ADDRESS No subnet selected because no suitable address to use for subnet selection was found. A debug message issued when the server was find a suitable address to use for subnet selection. % DHCPSRV_SUBNET6_SELECT_BY_ADDRESS_NO_MATCH No subnet matches address: %1 A debug message issued when the server was unable to select a subnet using the specified address. % DHCPSRV_SUBNET6_SELECT_BY_INTERFACE_ID_NO_MATCH No subnet matches interface id: %1 A debug message issued when the server was unable to select a subnet using the specified interface id. % DHCPSRV_SUBNET6_SELECT_BY_INTERFACE_NO_MATCH No subnet matches interface: %1 A debug message issued when the server was unable to select a subnet using the specified interface name. % DHCPSRV_TIMERMGR_CALLBACK_FAILED running handler for timer %1 caused exception: %2 This error message is emitted when the timer elapsed and the operation associated with this timer has thrown an exception. The timer name and the reason for exception is logged. % DHCPSRV_TIMERMGR_REGISTER_TIMER registering timer: %1, using interval: %2 ms A debug message issued when the new interval timer is registered in the Timer Manager. This timer will have a callback function associated with it, and this function will be executed according to the interval specified. The unique name of the timer and the interval at which the callback function will be executed is included in the message. % DHCPSRV_TIMERMGR_RUN_TIMER_OPERATION running operation for timer: %1 A debug message issued when the Timer Manager is about to run a periodic operation associated with the given timer. An example of such operation is a periodic cleanup of expired leases. The name of the timer is included in the message. % DHCPSRV_TIMERMGR_START_TIMER starting timer: %1 A debug message issued when the registered interval timer is being started. If this operation is successful the timer will periodically execute the operation associated with it. The name of the started timer is included in the message. % DHCPSRV_TIMERMGR_STOP_TIMER stopping timer: %1 A debug message issued when the registered interval timer is being stopped. The timer remains registered and can be restarted if necessary. The name of the timer is included in the message. % DHCPSRV_TIMERMGR_UNREGISTER_ALL_TIMERS unregistering all timers A debug message issued when all registered interval timers are being unregistered from the Timer Manager. % DHCPSRV_TIMERMGR_UNREGISTER_TIMER unregistering timer: %1 A debug message issued when one of the registered interval timers is unregistered from the Timer Manager. The name of the timer is included in the message. % DHCPSRV_UNEXPECTED_NAME database access parameters passed through '%1', expected 'lease-database' The parameters for access the lease database were passed to the server through the named configuration parameter, but the code was expecting them to be passed via the parameter named "lease-database". If the database opens successfully, there is no impact on server operation. However, as this does indicate an error in the source code, please submit a bug report. % DHCPSRV_UNKNOWN_DB unknown database type: %1 The database access string specified a database type (given in the message) that is unknown to the software. This is a configuration error.