Adding upstream version 0.8.0.upstream/0.8.0upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 296 insertions, 0 deletions

diff --git a/third-party/tommyds/tommyhashdyn.h b/third-party/tommyds/tommyhashdyn.h
new file mode 100644
index 0000000..ed4a607
--- /dev/null
+++ b/third-party/tommyds/tommyhashdyn.h
@@ -0,0 +1,296 @@
+/*
+ * Copyright (c) 2010, Andrea Mazzoleni. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/** \file
+ * Dynamic chained hashtable.
+ *
+ * This hashtable resizes dynamically. It starts with the minimal size of 16 buckets, it doubles
+ * the size then it reaches a load factor greater than 0.5 and it halves the size with a load
+ * factor lower than 0.125.
+ *
+ * All the elements are reallocated in a single resize operation done inside
+ * tommy_hashdyn_insert() or tommy_hashdyn_remove().
+ *
+ * Note that the resize operation takes approximatively 100 [ms] with 1 million of elements,
+ * and 1 [second] with 10 millions. This could be a problem in real-time applications.
+ *
+ * The resize also fragment the heap, as it involves allocating a double-sized table, copy elements,
+ * and deallocating the older table. Leaving a big hole in the heap.
+ *
+ * The ::tommy_hashlin hashtable fixes both problems.
+ *
+ * To initialize the hashtable you have to call tommy_hashdyn_init().
+ *
+ * \code
+ * tommy_hashslin hashdyn;
+ *
+ * tommy_hashdyn_init(&hashdyn);
+ * \endcode
+ *
+ * To insert elements in the hashtable you have to call tommy_hashdyn_insert() for
+ * each element.
+ * In the insertion call you have to specify the address of the node, the
+ * address of the object, and the hash value of the key to use.
+ * The address of the object is used to initialize the tommy_node::data field
+ * of the node, and the hash to initialize the tommy_node::key field.
+ *
+ * \code
+ * struct object {
+ *     int value;
+ *     // other fields
+ *     tommy_node node;
+ * };
+ *
+ * struct object* obj = malloc(sizeof(struct object)); // creates the object
+ *
+ * obj->value = ...; // initializes the object
+ *
+ * tommy_hashdyn_insert(&hashdyn, &obj->node, obj, tommy_inthash_u32(obj->value)); // inserts the object
+ * \endcode
+ *
+ * To find and element in the hashtable you have to call tommy_hashtable_search()
+ * providing a comparison function, its argument, and the hash of the key to search.
+ *
+ * \code
+ * int compare(const void* arg, const void* obj)
+ * {
+ *     return *(const int*)arg != ((const struct object*)obj)->value;
+ * }
+ *
+ * int value_to_find = 1;
+ * struct object* obj = tommy_hashdyn_search(&hashdyn, compare, &value_to_find, tommy_inthash_u32(value_to_find));
+ * if (!obj) {
+ *     // not found
+ * } else {
+ *     // found
+ * }
+ * \endcode
+ *
+ * To iterate over all the elements in the hashtable with the same key, you have to
+ * use tommy_hashdyn_bucket() and follow the tommy_node::next pointer until NULL.
+ * You have also to check explicitely for the key, as the bucket may contains
+ * different keys.
+ *
+ * \code
+ * int value_to_find = 1;
+ * tommy_node* i = tommy_hashdyn_bucket(&hashdyn, tommy_inthash_u32(value_to_find));
+ * while (i) {
+ *     struct object* obj = i->data; // gets the object pointer
+ *
+ *     if (obj->value == value_to_find) {
+ *         printf("%d\n", obj->value); // process the object
+ *     }
+ *
+ *     i = i->next; // goes to the next element
+ * }
+ * \endcode
+ *
+ * To remove an element from the hashtable you have to call tommy_hashdyn_remove()
+ * providing a comparison function, its argument, and the hash of the key to search
+ * and remove.
+ *
+ * \code
+ * struct object* obj = tommy_hashdyn_remove(&hashdyn, compare, &value_to_remove, tommy_inthash_u32(value_to_remove));
+ * if (obj) {
+ *     free(obj); // frees the object allocated memory
+ * }
+ * \endcode
+ *
+ * To destroy the hashtable you have to remove all the elements, and deinitialize
+ * the hashtable calling tommy_hashdyn_done().
+ *
+ * \code
+ * tommy_hashdyn_done(&hashdyn);
+ * \endcode
+ *
+ * If you need to iterate over all the elements in the hashtable, you can use
+ * tommy_hashdyn_foreach() or tommy_hashdyn_foreach_arg().
+ * If you need a more precise control with a real iteration, you have to insert
+ * all the elements also in a ::tommy_list, and use the list to iterate.
+ * See the \ref multiindex example for more detail.
+ */
+
+#ifndef __TOMMYHASHDYN_H
+#define __TOMMYHASHDYN_H
+
+#include "tommyhash.h"
+
+/******************************************************************************/
+/* hashdyn */
+
+/** \internal
+ * Initial and minimal size of the hashtable expressed as a power of 2.
+ * The initial size is 2^TOMMY_HASHDYN_BIT.
+ */
+#define TOMMY_HASHDYN_BIT 4
+
+/**
+ * Hashtable node.
+ * This is the node that you have to include inside your objects.
+ */
+typedef tommy_node tommy_hashdyn_node;
+
+/**
+ * Hashtable container type.
+ * \note Don't use internal fields directly, but access the container only using functions.
+ */
+typedef struct tommy_hashdyn_struct {
+	tommy_hashdyn_node** bucket; /**< Hash buckets. One list for each hash modulus. */
+	tommy_uint_t bucket_bit; /**< Bits used in the bit mask. */
+	tommy_count_t bucket_max; /**< Number of buckets. */
+	tommy_count_t bucket_mask; /**< Bit mask to access the buckets. */
+	tommy_count_t count; /**< Number of elements. */
+} tommy_hashdyn;
+
+/**
+ * Initializes the hashtable.
+ */
+void tommy_hashdyn_init(tommy_hashdyn* hashdyn);
+
+/**
+ * Deinitializes the hashtable.
+ *
+ * You can call this function with elements still contained,
+ * but such elements are not going to be freed by this call.
+ */
+void tommy_hashdyn_done(tommy_hashdyn* hashdyn);
+
+/**
+ * Inserts an element in the hashtable.
+ */
+void tommy_hashdyn_insert(tommy_hashdyn* hashdyn, tommy_hashdyn_node* node, void* data, tommy_hash_t hash);
+
+/**
+ * Searches and removes an element from the hashtable.
+ * You have to provide a compare function and the hash of the element you want to remove.
+ * If the element is not found, 0 is returned.
+ * If more equal elements are present, the first one is removed.
+ * \param cmp Compare function called with cmp_arg as first argument and with the element to compare as a second one.
+ * The function should return 0 for equal elements, anything other for different elements.
+ * \param cmp_arg Compare argument passed as first argument of the compare function.
+ * \param hash Hash of the element to find and remove.
+ * \return The removed element, or 0 if not found.
+ */
+void* tommy_hashdyn_remove(tommy_hashdyn* hashdyn, tommy_search_func* cmp, const void* cmp_arg, tommy_hash_t hash);
+
+/**
+ * Gets the bucket of the specified hash.
+ * The bucket is guaranteed to contain ALL the elements with the specified hash,
+ * but it can contain also others.
+ * You can access elements in the bucket following the ::next pointer until 0.
+ * \param hash Hash of the element to find.
+ * \return The head of the bucket, or 0 if empty.
+ */
+tommy_inline tommy_hashdyn_node* tommy_hashdyn_bucket(tommy_hashdyn* hashdyn, tommy_hash_t hash)
+{
+	return hashdyn->bucket[hash & hashdyn->bucket_mask];
+}
+
+/**
+ * Searches an element in the hashtable.
+ * You have to provide a compare function and the hash of the element you want to find.
+ * If more equal elements are present, the first one is returned.
+ * \param cmp Compare function called with cmp_arg as first argument and with the element to compare as a second one.
+ * The function should return 0 for equal elements, anything other for different elements.
+ * \param cmp_arg Compare argument passed as first argument of the compare function.
+ * \param hash Hash of the element to find.
+ * \return The first element found, or 0 if none.
+ */
+tommy_inline void* tommy_hashdyn_search(tommy_hashdyn* hashdyn, tommy_search_func* cmp, const void* cmp_arg, tommy_hash_t hash)
+{
+	tommy_hashdyn_node* i = tommy_hashdyn_bucket(hashdyn, hash);
+
+	while (i) {
+		/* we first check if the hash matches, as in the same bucket we may have multiples hash values */
+		if (i->key == hash && cmp(cmp_arg, i->data) == 0)
+			return i->data;
+		i = i->next;
+	}
+	return 0;
+}
+
+/**
+ * Removes an element from the hashtable.
+ * You must already have the address of the element to remove.
+ * \return The tommy_node::data field of the node removed.
+ */
+void* tommy_hashdyn_remove_existing(tommy_hashdyn* hashdyn, tommy_hashdyn_node* node);
+
+/**
+ * Calls the specified function for each element in the hashtable.
+ *
+ * You cannot add or remove elements from the inside of the callback,
+ * but can use it to deallocate them.
+ *
+ * \code
+ * tommy_hashdyn hashdyn;
+ *
+ * // initializes the hashtable
+ * tommy_hashdyn_init(&hashdyn);
+ *
+ * ...
+ *
+ * // creates an object
+ * struct object* obj = malloc(sizeof(struct object));
+ *
+ * ...
+ *
+ * // insert it in the hashtable
+ * tommy_hashdyn_insert(&hashdyn, &obj->node, obj, tommy_inthash_u32(obj->value));
+ *
+ * ...
+ *
+ * // deallocates all the objects iterating the hashtable
+ * tommy_hashdyn_foreach(&hashdyn, free);
+ *
+ * // deallocates the hashtable
+ * tommy_hashdyn_done(&hashdyn);
+ * \endcode
+ */
+void tommy_hashdyn_foreach(tommy_hashdyn* hashdyn, tommy_foreach_func* func);
+
+/**
+ * Calls the specified function with an argument for each element in the hashtable.
+ */
+void tommy_hashdyn_foreach_arg(tommy_hashdyn* hashdyn, tommy_foreach_arg_func* func, void* arg);
+
+/**
+ * Gets the number of elements.
+ */
+tommy_inline tommy_count_t tommy_hashdyn_count(tommy_hashdyn* hashdyn)
+{
+	return hashdyn->count;
+}
+
+/**
+ * Gets the size of allocated memory.
+ * It includes the size of the ::tommy_hashdyn_node of the stored elements.
+ */
+tommy_size_t tommy_hashdyn_memory_usage(tommy_hashdyn* hashdyn);
+
+#endif
+