diff options
Diffstat (limited to 'src/tpm12/tpm_constants.h')
| -rw-r--r-- | src/tpm12/tpm_constants.h | 1652 |
1 files changed, 1652 insertions, 0 deletions
diff --git a/src/tpm12/tpm_constants.h b/src/tpm12/tpm_constants.h new file mode 100644 index 0000000..9569e6d --- /dev/null +++ b/src/tpm12/tpm_constants.h @@ -0,0 +1,1652 @@ +/********************************************************************************/ +/* */ +/* TPM Constants */ +/* Written by Ken Goldman */ +/* IBM Thomas J. Watson Research Center */ +/* $Id: tpm_constants.h 4603 2011-08-16 20:40:26Z kgoldman $ */ +/* */ +/* (c) Copyright IBM Corporation 2006, 2010. */ +/* */ +/* All rights reserved. */ +/* */ +/* Redistribution and use in source and binary forms, with or without */ +/* modification, are permitted provided that the following conditions are */ +/* met: */ +/* */ +/* Redistributions of source code must retain the above copyright notice, */ +/* this list of conditions and the following disclaimer. */ +/* */ +/* Redistributions in binary form must reproduce the above copyright */ +/* notice, this list of conditions and the following disclaimer in the */ +/* documentation and/or other materials provided with the distribution. */ +/* */ +/* Neither the names of the IBM Corporation nor the names of its */ +/* contributors may be used to endorse or promote products derived from */ +/* this software without specific prior written permission. */ +/* */ +/* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS */ +/* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT */ +/* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR */ +/* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT */ +/* HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, */ +/* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT */ +/* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, */ +/* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY */ +/* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT */ +/* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE */ +/* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ +/********************************************************************************/ + +#ifndef TPM_CONSTANTS_H +#define TPM_CONSTANTS_H + +#include <stdint.h> + +#include <tpm_library_intern.h> + +/* + NOTE implementation Specific +*/ + +/* + version, revision, specLevel, errataRev +*/ + +/* current for released specification revision 103 */ + +#define TPM_REVISION_MAX 9999 +#ifndef TPM_REVISION +#define TPM_REVISION TPM_REVISION_MAX +#endif + +#if (TPM_REVISION >= 116) + +#define TPM_SPEC_LEVEL 0x0002 /* uint16_t The level of ordinals supported */ +#define TPM_ERRATA_REV 0x03 /* specification errata level */ + +#elif (TPM_REVISION >= 103) + +#define TPM_SPEC_LEVEL 0x0002 /* uint16_t The level of ordinals supported */ +#define TPM_ERRATA_REV 0x02 /* specification errata level */ + +#elif (TPM_REVISION >= 94) + +#define TPM_SPEC_LEVEL 0x0002 /* uint16_t The level of ordinals supported */ +#define TPM_ERRATA_REV 0x01 /* specification errata level */ + +#elif (TPM_REVISION >= 85) + +#define TPM_SPEC_LEVEL 0x0002 /* uint16_t The level of ordinals supported */ +#define TPM_ERRATA_REV 0x00 /* specification errata level */ + +#else + +#define TPM_SPEC_LEVEL 0x0001 /* uint16_t The level of ordinals supported */ +#define TPM_ERRATA_REV 0x00 /* specification errata level */ + +#endif + +/* IBM specific */ + +#if 0 /* at one time vendorID was the PCI vendor ID, this is the IBM code */ +#define TPM_VENDOR_ID "\x00\x00\x10\x14" /* BYTE[4], the vendor ID, obtained from the TCG, + typically PCI vendor ID */ +#endif + + + +#define TPM_VENDOR_ID "IBM" /* 4 bytes, as of rev 99 vendorID and TPM_CAP_PROP_MANUFACTURER + return the same value */ +#define TPM_MANUFACTURER "IBM" /* 4 characters, assigned by TCG, typically stock ticker symbol */ + + +/* Timeouts in microseconds. These are for the platform specific interface (e.g. the LPC bus + registers in the PC Client TPM). They are most likely not applicable to a software TPM. */ +#define TPM_TIMEOUT_A 1000000 +#define TPM_TIMEOUT_B 1000000 +#define TPM_TIMEOUT_C 1000000 +#define TPM_TIMEOUT_D 1000000 + +/* dictionary attack mitigation */ + +#define TPM_LOCKOUT_THRESHOLD 5 /* successive failures to trigger lockout, must be greater + than 0 */ + +/* Denotes the duration value in microseconds of the duration of the three classes of commands: + Small, Medium and Long. The command types are in the Part 2 Ordinal Table. Essentially: + + Long - creating an RSA key pair + Medium - using an RSA key + Short - anything else +*/ + +#ifndef TPM_SMALL_DURATION +#define TPM_SMALL_DURATION 2000000 +#endif + +#ifndef TPM_MEDIUM_DURATION +#define TPM_MEDIUM_DURATION 5000000 +#endif + +#ifndef TPM_LONG_DURATION +#define TPM_LONG_DURATION 60000000 +#endif + +/* startup effects */ + +#define TPM_STARTUP_EFFECTS_VALUE \ +(TPM_STARTUP_EFFECTS_ST_ANY_RT_KEY | /* key resources init by TPM_Startup(ST_ANY) */ \ + TPM_STARTUP_EFFECTS_ST_STATE_RT_HASH | /* hash resources are init by TPM_Startup(ST_STATE) */ \ + TPM_STARTUP_EFFECTS_ST_CLEAR_AUDITDIGEST) /* auditDigest nulled on TPM_Startup(ST_CLEAR) */ + +/* + TPM buffer limits +*/ + +/* This is the increment by which the TPM_STORE_BUFFER grows. A larger number saves realloc's. A + smaller number saves memory. + + TPM_ALLOC_MAX must be a multiple of this value. +*/ + +#define TPM_STORE_BUFFER_INCREMENT (TPM_ALLOC_MAX / 64) + +/* This is the maximum value of the TPM input and output packet buffer. It should be large enough + to accommodate the largest TPM command or response, currently about 1200 bytes. It should be + small enough to accommodate whatever software is driving the TPM. + + NOTE: Some commands are somewhat open ended, and related to this parmater. E.g., The input size + for the TPM_SHA1Init. The output size for TPM_GetRandom. + + It is returned by TPM_GetCapability -> TPM_CAP_PROP_INPUT_BUFFER +*/ + +#ifndef TPM_BUFFER_MAX +#define TPM_BUFFER_MAX 0x1000 /* 4k bytes */ +#endif + +#ifndef TPM_BUFFER_MIN +#define TPM_BUFFER_MIN 0x0c00 /* 3k bytes */ +#endif + +/* Random number generator */ + +/* maximum bytes in one TPM_GetRandom() call + + Use maximum input buffer size minus tag, paramSize, returnCode, randomBytesSize. +*/ + +#define TPM_RANDOM_MAX (TPM12_GetBufferSize() \ + - sizeof(TPM_TAG) - sizeof(uint32_t) \ + - sizeof(TPM_RESULT) - sizeof(uint32_t)) + +/* Maximum number of bytes that can be sent to TPM_SHA1Update. Must be a multiple of 64 bytes. + + Use maximum input buffer size minus tag, paramSize, ordinal, numBytes. +*/ + +#define TPM_SHA1_MAXNUMBYTES (TPM12_GetBufferSize() - 64) + +/* extra audit status bits for TSC commands outside the normal ordinal range */ +#define TSC_PHYS_PRES_AUDIT 0x01 +#define TSC_RESET_ESTAB_AUDIT 0x02 + + +/* TPM_CAP_MFR capabilities */ +#define TPM_CAP_PROCESS_ID 0x00000020 + + +/* define a value for an illegal instance handle */ + +#define TPM_ILLEGAL_INSTANCE_HANDLE 0xffffffff + +/* + NOTE End Implementation Specific +*/ + +/* 3. Structure Tags rev 105 + + There have been some indications that knowing what structure is in use would be valuable + information in each structure. This new tag will be in each new structure that the TPM defines. + + The upper nibble of the value designates the purview of the structure tag. 0 is used for TPM + structures, 1 for platforms, and 2-F are reserved. +*/ + +/* 3.1 TPM_STRUCTURE_TAG */ + +/* Structure */ +#define TPM_TAG_CONTEXTBLOB 0x0001 /* TPM_CONTEXT_BLOB */ +#define TPM_TAG_CONTEXT_SENSITIVE 0x0002 /* TPM_CONTEXT_SENSITIVE */ +#define TPM_TAG_CONTEXTPOINTER 0x0003 /* TPM_CONTEXT_POINTER */ +#define TPM_TAG_CONTEXTLIST 0x0004 /* TPM_CONTEXT_LIST */ +#define TPM_TAG_SIGNINFO 0x0005 /* TPM_SIGN_INFO */ +#define TPM_TAG_PCR_INFO_LONG 0x0006 /* TPM_PCR_INFO_LONG */ +#define TPM_TAG_PERSISTENT_FLAGS 0x0007 /* TPM_PERSISTENT_FLAGS (deprecated 1.1 struct) */ +#define TPM_TAG_VOLATILE_FLAGS 0x0008 /* TPM_VOLATILE_FLAGS (deprecated 1.1 struct) */ +#define TPM_TAG_PERSISTENT_DATA 0x0009 /* TPM_PERSISTENT_DATA (deprecated 1.1 struct) */ +#define TPM_TAG_VOLATILE_DATA 0x000A /* TPM_VOLATILE_DATA (deprecated 1.1 struct) */ +#define TPM_TAG_SV_DATA 0x000B /* TPM_SV_DATA */ +#define TPM_TAG_EK_BLOB 0x000C /* TPM_EK_BLOB */ +#define TPM_TAG_EK_BLOB_AUTH 0x000D /* TPM_EK_BLOB_AUTH */ +#define TPM_TAG_COUNTER_VALUE 0x000E /* TPM_COUNTER_VALUE */ +#define TPM_TAG_TRANSPORT_INTERNAL 0x000F /* TPM_TRANSPORT_INTERNAL */ +#define TPM_TAG_TRANSPORT_LOG_IN 0x0010 /* TPM_TRANSPORT_LOG_IN */ +#define TPM_TAG_TRANSPORT_LOG_OUT 0x0011 /* TPM_TRANSPORT_LOG_OUT */ +#define TPM_TAG_AUDIT_EVENT_IN 0x0012 /* TPM_AUDIT_EVENT_IN */ +#define TPM_TAG_AUDIT_EVENT_OUT 0X0013 /* TPM_AUDIT_EVENT_OUT */ +#define TPM_TAG_CURRENT_TICKS 0x0014 /* TPM_CURRENT_TICKS */ +#define TPM_TAG_KEY 0x0015 /* TPM_KEY */ +#define TPM_TAG_STORED_DATA12 0x0016 /* TPM_STORED_DATA12 */ +#define TPM_TAG_NV_ATTRIBUTES 0x0017 /* TPM_NV_ATTRIBUTES */ +#define TPM_TAG_NV_DATA_PUBLIC 0x0018 /* TPM_NV_DATA_PUBLIC */ +#define TPM_TAG_NV_DATA_SENSITIVE 0x0019 /* TPM_NV_DATA_SENSITIVE */ +#define TPM_TAG_DELEGATIONS 0x001A /* TPM DELEGATIONS */ +#define TPM_TAG_DELEGATE_PUBLIC 0x001B /* TPM_DELEGATE_PUBLIC */ +#define TPM_TAG_DELEGATE_TABLE_ROW 0x001C /* TPM_DELEGATE_TABLE_ROW */ +#define TPM_TAG_TRANSPORT_AUTH 0x001D /* TPM_TRANSPORT_AUTH */ +#define TPM_TAG_TRANSPORT_PUBLIC 0X001E /* TPM_TRANSPORT_PUBLIC */ +#define TPM_TAG_PERMANENT_FLAGS 0X001F /* TPM_PERMANENT_FLAGS */ +#define TPM_TAG_STCLEAR_FLAGS 0X0020 /* TPM_STCLEAR_FLAGS */ +#define TPM_TAG_STANY_FLAGS 0X0021 /* TPM_STANY_FLAGS */ +#define TPM_TAG_PERMANENT_DATA 0X0022 /* TPM_PERMANENT_DATA */ +#define TPM_TAG_STCLEAR_DATA 0X0023 /* TPM_STCLEAR_DATA */ +#define TPM_TAG_STANY_DATA 0X0024 /* TPM_STANY_DATA */ +#define TPM_TAG_FAMILY_TABLE_ENTRY 0X0025 /* TPM_FAMILY_TABLE_ENTRY */ +#define TPM_TAG_DELEGATE_SENSITIVE 0X0026 /* TPM_DELEGATE_SENSITIVE */ +#define TPM_TAG_DELG_KEY_BLOB 0X0027 /* TPM_DELG_KEY_BLOB */ +#define TPM_TAG_KEY12 0x0028 /* TPM_KEY12 */ +#define TPM_TAG_CERTIFY_INFO2 0X0029 /* TPM_CERTIFY_INFO2 */ +#define TPM_TAG_DELEGATE_OWNER_BLOB 0X002A /* TPM_DELEGATE_OWNER_BLOB */ +#define TPM_TAG_EK_BLOB_ACTIVATE 0X002B /* TPM_EK_BLOB_ACTIVATE */ +#define TPM_TAG_DAA_BLOB 0X002C /* TPM_DAA_BLOB */ +#define TPM_TAG_DAA_CONTEXT 0X002D /* TPM_DAA_CONTEXT */ +#define TPM_TAG_DAA_ENFORCE 0X002E /* TPM_DAA_ENFORCE */ +#define TPM_TAG_DAA_ISSUER 0X002F /* TPM_DAA_ISSUER */ +#define TPM_TAG_CAP_VERSION_INFO 0X0030 /* TPM_CAP_VERSION_INFO */ +#define TPM_TAG_DAA_SENSITIVE 0X0031 /* TPM_DAA_SENSITIVE */ +#define TPM_TAG_DAA_TPM 0X0032 /* TPM_DAA_TPM */ +#define TPM_TAG_CMK_MIGAUTH 0X0033 /* TPM_CMK_MIGAUTH */ +#define TPM_TAG_CMK_SIGTICKET 0X0034 /* TPM_CMK_SIGTICKET */ +#define TPM_TAG_CMK_MA_APPROVAL 0X0035 /* TPM_CMK_MA_APPROVAL */ +#define TPM_TAG_QUOTE_INFO2 0X0036 /* TPM_QUOTE_INFO2 */ +#define TPM_TAG_DA_INFO 0x0037 /* TPM_DA_INFO */ +#define TPM_TAG_DA_INFO_LIMITED 0x0038 /* TPM_DA_INFO_LIMITED */ +#define TPM_TAG_DA_ACTION_TYPE 0x0039 /* TPM_DA_ACTION_TYPE */ + +/* + SW TPM Tags +*/ + +/* + These tags are used to describe the format of serialized TPM non-volatile state +*/ + +/* These describe the overall format */ + +/* V1 state is the sequence permanent data, permanent flags, owner evict keys, NV defined space */ + +#define TPM_TAG_NVSTATE_V1 0x0001 /* svn revision 4078 */ + +/* These tags describe the TPM_PERMANENT_DATA format */ + +/* For the first release, use the standard TPM_TAG_PERMANENT_DATA tag. Since this tag is never + visible outside the TPM, the tag value can be changed if the format changes. +*/ + +/* These tags describe the TPM_PERMANENT_FLAGS format */ + +/* The TPM_PERMANENT_FLAGS structure changed from rev 94 to 103. Unfortunately, the standard TPM + tag did not change. Define distinguishing values here. +*/ + +#define TPM_TAG_NVSTATE_PF94 0x0001 +#define TPM_TAG_NVSTATE_PF103 0x0002 + +/* This tag describes the owner evict key format */ + +#define TPM_TAG_NVSTATE_OE_V1 0x0001 + +/* This tag describes the NV defined space format */ + +#define TPM_TAG_NVSTATE_NV_V1 0x0001 + +/* V2 added the NV public optimization */ + +#define TPM_TAG_NVSTATE_NV_V2 0x0002 + +/* + These tags are used to describe the format of serialized TPM volatile state +*/ + +/* These describe the overall format */ + +/* V1 state is the sequence TPM Parameters, TPM_STCLEAR_FLAGS, TPM_STANY_FLAGS, TPM_STCLEAR_DATA, + TPM_STANY_DATA, TPM_KEY_HANDLE_ENTRY, SHA1 context(s), TPM_TRANSHANDLE, testState, NV volatile + flags */ + +#define TPM_TAG_VSTATE_V1 0x0001 + +/* This tag defines the TPM Parameters format */ + +#define TPM_TAG_TPM_PARAMETERS_V1 0x0001 + +/* This tag defines the TPM_STCLEAR_FLAGS format */ + +/* V1 is the TCG standard returned by the getcap. It's unlikely that this will change */ + +#define TPM_TAG_STCLEAR_FLAGS_V1 0x0001 + +/* These tags describe the TPM_STANY_FLAGS format */ + +/* For the first release, use the standard TPM_TAG_STANY_FLAGS tag. Since this tag is never visible + outside the TPM, the tag value can be changed if the format changes. +*/ + +/* This tag defines the TPM_STCLEAR_DATA format */ + +/* V2 deleted the ordinalResponse, responseCount */ + +#define TPM_TAG_STCLEAR_DATA_V2 0X0024 + +/* These tags describe the TPM_STANY_DATA format */ + +/* For the first release, use the standard TPM_TAG_STANY_DATA tag. Since this tag is never visible + outside the TPM, the tag value can be changed if the format changes. +*/ + +/* This tag defines the key handle entries format */ + +#define TPM_TAG_KEY_HANDLE_ENTRIES_V1 0x0001 + +/* This tag defines the SHA-1 context format */ + +#define TPM_TAG_SHA1CONTEXT_OSSL_V1 0x0001 /* for openssl */ + +#define TPM_TAG_SHA1CONTEXT_FREEBL_V1 0x0101 /* for freebl */ + +/* This tag defines the NV index entries volatile format */ + +#define TPM_TAG_NV_INDEX_ENTRIES_VOLATILE_V1 0x0001 + +/* 4. Types + */ + +/* 4.1 TPM_RESOURCE_TYPE rev 87 */ + +#define TPM_RT_KEY 0x00000001 /* The handle is a key handle and is the result of a LoadKey + type operation */ + +#define TPM_RT_AUTH 0x00000002 /* The handle is an authorization handle. Auth handles come from + TPM_OIAP, TPM_OSAP and TPM_DSAP */ + +#define TPM_RT_HASH 0X00000003 /* Reserved for hashes */ + +#define TPM_RT_TRANS 0x00000004 /* The handle is for a transport session. Transport handles come + from TPM_EstablishTransport */ + +#define TPM_RT_CONTEXT 0x00000005 /* Resource wrapped and held outside the TPM using the context + save/restore commands */ + +#define TPM_RT_COUNTER 0x00000006 /* Reserved for counters */ + +#define TPM_RT_DELEGATE 0x00000007 /* The handle is for a delegate row. These are the internal rows + held in NV storage by the TPM */ + +#define TPM_RT_DAA_TPM 0x00000008 /* The value is a DAA TPM specific blob */ + +#define TPM_RT_DAA_V0 0x00000009 /* The value is a DAA V0 parameter */ + +#define TPM_RT_DAA_V1 0x0000000A /* The value is a DAA V1 parameter */ + +/* 4.2 TPM_PAYLOAD_TYPE rev 87 + + This structure specifies the type of payload in various messages. +*/ + +#define TPM_PT_ASYM 0x01 /* The entity is an asymmetric key */ +#define TPM_PT_BIND 0x02 /* The entity is bound data */ +#define TPM_PT_MIGRATE 0x03 /* The entity is a migration blob */ +#define TPM_PT_MAINT 0x04 /* The entity is a maintenance blob */ +#define TPM_PT_SEAL 0x05 /* The entity is sealed data */ +#define TPM_PT_MIGRATE_RESTRICTED 0x06 /* The entity is a restricted-migration asymmetric key */ +#define TPM_PT_MIGRATE_EXTERNAL 0x07 /* The entity is a external migratable key */ +#define TPM_PT_CMK_MIGRATE 0x08 /* The entity is a CMK migratable blob */ +/* 0x09 - 0x7F Reserved for future use by TPM */ +/* 0x80 - 0xFF Vendor specific payloads */ + +/* 4.3 TPM_ENTITY_TYPE rev 100 + + This specifies the types of entity that are supported by the TPM. + + The LSB is used to indicate the entity type. The MSB is used to indicate the ADIP + encryption scheme when applicable. + + For compatibility with TPM 1.1, this mapping is maintained: + + 0x0001 specifies a keyHandle entity with XOR encryption + 0x0002 specifies an owner entity with XOR encryption + 0x0003 specifies some data entity with XOR encryption + 0x0004 specifies the SRK entity with XOR encryption + 0x0005 specifies a key entity with XOR encryption + + When the entity is not being used for ADIP encryption, the MSB MUST be 0x00. +*/ + +/* TPM_ENTITY_TYPE LSB Values (entity type) */ + +#define TPM_ET_KEYHANDLE 0x01 /* The entity is a keyHandle or key */ +#define TPM_ET_OWNER 0x02 /*0x40000001 The entity is the TPM Owner */ +#define TPM_ET_DATA 0x03 /* The entity is some data */ +#define TPM_ET_SRK 0x04 /*0x40000000 The entity is the SRK */ +#define TPM_ET_KEY 0x05 /* The entity is a key or keyHandle */ +#define TPM_ET_REVOKE 0x06 /*0x40000002 The entity is the RevokeTrust value */ +#define TPM_ET_DEL_OWNER_BLOB 0x07 /* The entity is a delegate owner blob */ +#define TPM_ET_DEL_ROW 0x08 /* The entity is a delegate row */ +#define TPM_ET_DEL_KEY_BLOB 0x09 /* The entity is a delegate key blob */ +#define TPM_ET_COUNTER 0x0A /* The entity is a counter */ +#define TPM_ET_NV 0x0B /* The entity is a NV index */ +#define TPM_ET_OPERATOR 0x0C /* The entity is the operator */ +#define TPM_ET_RESERVED_HANDLE 0x40 /* Reserved. This value avoids collisions with the handle + MSB setting.*/ + +/* TPM_ENTITY_TYPE MSB Values (ADIP encryption scheme) */ + +#define TPM_ET_XOR 0x00 /* XOR */ +#define TPM_ET_AES128_CTR 0x06 /* AES 128 bits in CTR mode */ + +/* 4.4 Handles rev 88 + + Handles provides pointers to TPM internal resources. Handles should provide the ability to locate + a value without collision. + + 1. The TPM MAY order and set a handle to any value the TPM determines is appropriate + + 2. The handle value SHALL provide assurance that collisions SHOULD not occur in 2^24 handles + + 4.4.1 Reserved Key Handles + + The reserved key handles. These values specify specific keys or specific actions for the TPM. +*/ + +/* 4.4.1 Reserved Key Handles rev 87 + + The reserved key handles. These values specify specific keys or specific actions for the TPM. + + TPM_KH_TRANSPORT indicates to TPM_EstablishTransport that there is no encryption key, and that + the "secret" wrapped parameters are actually passed unencrypted. +*/ + +#define TPM_KH_SRK 0x40000000 /* The handle points to the SRK */ +#define TPM_KH_OWNER 0x40000001 /* The handle points to the TPM Owner */ +#define TPM_KH_REVOKE 0x40000002 /* The handle points to the RevokeTrust value */ +#define TPM_KH_TRANSPORT 0x40000003 /* The handle points to the TPM_EstablishTransport static + authorization */ +#define TPM_KH_OPERATOR 0x40000004 /* The handle points to the Operator auth */ +#define TPM_KH_ADMIN 0x40000005 /* The handle points to the delegation administration + auth */ +#define TPM_KH_EK 0x40000006 /* The handle points to the PUBEK, only usable with + TPM_OwnerReadInternalPub */ + +/* 4.5 TPM_STARTUP_TYPE rev 87 + + To specify what type of startup is occurring. +*/ + +#define TPM_ST_CLEAR 0x0001 /* The TPM is starting up from a clean state */ +#define TPM_ST_STATE 0x0002 /* The TPM is starting up from a saved state */ +#define TPM_ST_DEACTIVATED 0x0003 /* The TPM is to startup and set the deactivated flag to + TRUE */ + +/* 4.6 TPM_STARTUP_EFFECTS rev 101 + + This structure lists for the various resources and sessions on a TPM the affect that TPM_Startup + has on the values. + + There are three ST_STATE options for keys (restore all, restore non-volatile, or restore none) + and two ST_CLEAR options (restore non-volatile or restore none). As bit 4 was insufficient to + describe the possibilities, it is deprecated. Software should use TPM_CAP_KEY_HANDLE to + determine which keys are loaded after TPM_Startup. + + 31-9 No information and MUST be FALSE + + 8 TPM_RT_DAA_TPM resources are initialized by TPM_Startup(ST_STATE) + 7 TPM_Startup has no effect on auditDigest + 6 auditDigest is set to all zeros on TPM_Startup(ST_CLEAR) but not on other types of TPM_Startup + 5 auditDigest is set to all zeros on TPM_Startup(any) + 4 TPM_RT_KEY Deprecated, as the meaning was subject to interpretation. (Was:TPM_RT_KEY resources + are initialized by TPM_Startup(ST_ANY)) + 3 TPM_RT_AUTH resources are initialized by TPM_Startup(ST_STATE) + 2 TPM_RT_HASH resources are initialized by TPM_Startup(ST_STATE) + 1 TPM_RT_TRANS resources are initialized by TPM_Startup(ST_STATE) + 0 TPM_RT_CONTEXT session (but not key) resources are initialized by TPM_Startup(ST_STATE) +*/ + + +#define TPM_STARTUP_EFFECTS_ST_STATE_RT_DAA 0x00000100 /* bit 8 */ +#define TPM_STARTUP_EFFECTS_STARTUP_NO_AUDITDIGEST 0x00000080 /* bit 7 */ +#define TPM_STARTUP_EFFECTS_ST_CLEAR_AUDITDIGEST 0x00000040 /* bit 6 */ +#define TPM_STARTUP_EFFECTS_STARTUP_AUDITDIGEST 0x00000020 /* bit 5 */ +#define TPM_STARTUP_EFFECTS_ST_ANY_RT_KEY 0x00000010 /* bit 4 */ +#define TPM_STARTUP_EFFECTS_ST_STATE_RT_AUTH 0x00000008 /* bit 3 */ +#define TPM_STARTUP_EFFECTS_ST_STATE_RT_HASH 0x00000004 /* bit 2 */ +#define TPM_STARTUP_EFFECTS_ST_STATE_RT_TRANS 0x00000002 /* bit 1 */ +#define TPM_STARTUP_EFFECTS_ST_STATE_RT_CONTEXT 0x00000001 /* bit 0 */ + +/* 4.7 TPM_PROTOCOL_ID rev 87 + + This value identifies the protocol in use. +*/ + +#define TPM_PID_NONE 0x0000 /* kgold - added */ +#define TPM_PID_OIAP 0x0001 /* The OIAP protocol. */ +#define TPM_PID_OSAP 0x0002 /* The OSAP protocol. */ +#define TPM_PID_ADIP 0x0003 /* The ADIP protocol. */ +#define TPM_PID_ADCP 0X0004 /* The ADCP protocol. */ +#define TPM_PID_OWNER 0X0005 /* The protocol for taking ownership of a TPM. */ +#define TPM_PID_DSAP 0x0006 /* The DSAP protocol */ +#define TPM_PID_TRANSPORT 0x0007 /*The transport protocol */ + +/* 4.8 TPM_ALGORITHM_ID rev 99 + + This table defines the types of algorithms that may be supported by the TPM. + + The TPM MUST support the algorithms TPM_ALG_RSA, TPM_ALG_SHA, TPM_ALG_HMAC, and TPM_ALG_MGF1 +*/ + +#define TPM_ALG_RSA 0x00000001 /* The RSA algorithm. */ +/* #define TPM_ALG_DES 0x00000002 (was the DES algorithm) */ +/* #define TPM_ALG_3DES 0X00000003 (was the 3DES algorithm in EDE mode) */ +#define TPM_ALG_SHA 0x00000004 /* The SHA1 algorithm */ +#define TPM_ALG_HMAC 0x00000005 /* The RFC 2104 HMAC algorithm */ +#define TPM_ALG_AES128 0x00000006 /* The AES algorithm, key size 128 */ +#define TPM_ALG_MGF1 0x00000007 /* The XOR algorithm using MGF1 to create a string the size + of the encrypted block */ +#define TPM_ALG_AES192 0x00000008 /* AES, key size 192 */ +#define TPM_ALG_AES256 0x00000009 /* AES, key size 256 */ +#define TPM_ALG_XOR 0x0000000A /* XOR using the rolling nonces */ + +/* 4.9 TPM_PHYSICAL_PRESENCE rev 87 + +*/ + +#define TPM_PHYSICAL_PRESENCE_HW_DISABLE 0x0200 /* Sets the physicalPresenceHWEnable to FALSE + */ +#define TPM_PHYSICAL_PRESENCE_CMD_DISABLE 0x0100 /* Sets the physicalPresenceCMDEnable to + FALSE */ +#define TPM_PHYSICAL_PRESENCE_LIFETIME_LOCK 0x0080 /* Sets the physicalPresenceLifetimeLock to + TRUE */ +#define TPM_PHYSICAL_PRESENCE_HW_ENABLE 0x0040 /* Sets the physicalPresenceHWEnable to TRUE + */ +#define TPM_PHYSICAL_PRESENCE_CMD_ENABLE 0x0020 /* Sets the physicalPresenceCMDEnable to TRUE + */ +#define TPM_PHYSICAL_PRESENCE_NOTPRESENT 0x0010 /* Sets PhysicalPresence = FALSE */ +#define TPM_PHYSICAL_PRESENCE_PRESENT 0x0008 /* Sets PhysicalPresence = TRUE */ +#define TPM_PHYSICAL_PRESENCE_LOCK 0x0004 /* Sets PhysicalPresenceLock = TRUE */ + +#define TPM_PHYSICAL_PRESENCE_MASK 0xfc03 /* ~ OR of all above bits */ + +/* 4.10 TPM_MIGRATE_SCHEME rev 103 + + The scheme indicates how the StartMigrate command should handle the migration of the encrypted + blob. +*/ + +#define TPM_MS_MIGRATE 0x0001 /* A public key that can be used with all TPM + migration commands other than 'ReWrap' mode. */ +#define TPM_MS_REWRAP 0x0002 /* A public key that can be used for the ReWrap mode + of TPM_CreateMigrationBlob. */ +#define TPM_MS_MAINT 0x0003 /* A public key that can be used for the Maintenance + commands */ +#define TPM_MS_RESTRICT_MIGRATE 0x0004 /* The key is to be migrated to a Migration + Authority. */ +#define TPM_MS_RESTRICT_APPROVE 0x0005 /* The key is to be migrated to an entity approved by + a Migration Authority using double wrapping */ + +/* 4.11 TPM_EK_TYPE rev 87 + + This structure indicates what type of information that the EK is dealing with. +*/ + +#define TPM_EK_TYPE_ACTIVATE 0x0001 /* The blob MUST be TPM_EK_BLOB_ACTIVATE */ +#define TPM_EK_TYPE_AUTH 0x0002 /* The blob MUST be TPM_EK_BLOB_AUTH */ + +/* 4.12 TPM_PLATFORM_SPECIFIC rev 87 + + This enumerated type indicates the platform specific spec that the information relates to. +*/ + +#define TPM_PS_PC_11 0x0001 /* PC Specific version 1.1 */ +#define TPM_PS_PC_12 0x0002 /* PC Specific version 1.2 */ +#define TPM_PS_PDA_12 0x0003 /* PDA Specific version 1.2 */ +#define TPM_PS_Server_12 0x0004 /* Server Specific version 1.2 */ +#define TPM_PS_Mobile_12 0x0005 /* Mobil Specific version 1.2 */ + +/* 5.8 TPM_KEY_USAGE rev 101 + + This table defines the types of keys that are possible. Each value defines for what operation + the key can be used. Most key usages can be CMKs. See 4.2, TPM_PAYLOAD_TYPE. + + Each key has a setting defining the encryption and signature scheme to use. The selection of a + key usage value limits the choices of encryption and signature schemes. +*/ + +#define TPM_KEY_UNINITIALIZED 0x0000 /* NOTE: Added. This seems like a good place to indicate + that a TPM_KEY structure has not been initialized */ + +#define TPM_KEY_SIGNING 0x0010 /* This SHALL indicate a signing key. The [private] key + SHALL be used for signing operations, only. This means + that it MUST be a leaf of the Protected Storage key + hierarchy. */ + +#define TPM_KEY_STORAGE 0x0011 /* This SHALL indicate a storage key. The key SHALL be used + to wrap and unwrap other keys in the Protected Storage + hierarchy */ + +#define TPM_KEY_IDENTITY 0x0012 /* This SHALL indicate an identity key. The key SHALL be + used for operations that require a TPM identity, only. */ + +#define TPM_KEY_AUTHCHANGE 0X0013 /* This SHALL indicate an ephemeral key that is in use + during the ChangeAuthAsym process, only. */ + +#define TPM_KEY_BIND 0x0014 /* This SHALL indicate a key that can be used for TPM_Bind + and TPM_Unbind operations only. */ + +#define TPM_KEY_LEGACY 0x0015 /* This SHALL indicate a key that can perform signing and + binding operations. The key MAY be used for both signing + and binding operations. The TPM_KEY_LEGACY key type is to + allow for use by applications where both signing and + encryption operations occur with the same key. */ + +#define TPM_KEY_MIGRATE 0x0016 /* This SHALL indicate a key in use for TPM_MigrateKey */ + +/* 5.8.1 TPM_ENC_SCHEME Mandatory Key Usage Schemes rev 99 + + The TPM MUST check that the encryption scheme defined for use with the key is a valid scheme for + the key type, as follows: +*/ + +#define TPM_ES_NONE 0x0001 +#define TPM_ES_RSAESPKCSv15 0x0002 +#define TPM_ES_RSAESOAEP_SHA1_MGF1 0x0003 +#define TPM_ES_SYM_CTR 0x0004 +#define TPM_ES_SYM_OFB 0x0005 + +/* 5.8.1 TPM_SIG_SCHEME Mandatory Key Usage Schemes rev 99 + + The TPM MUST check that the signature scheme defined for use with the key is a valid scheme for + the key type, as follows: +*/ + +#define TPM_SS_NONE 0x0001 +#define TPM_SS_RSASSAPKCS1v15_SHA1 0x0002 +#define TPM_SS_RSASSAPKCS1v15_DER 0x0003 +#define TPM_SS_RSASSAPKCS1v15_INFO 0x0004 + +/* 5.9 TPM_AUTH_DATA_USAGE rev 110 + + The indication to the TPM when authorization sessions for an entity are required. Future + versions may allow for more complex decisions regarding AuthData checking. +*/ + +#define TPM_AUTH_NEVER 0x00 /* This SHALL indicate that usage of the key without + authorization is permitted. */ + +#define TPM_AUTH_ALWAYS 0x01 /* This SHALL indicate that on each usage of the key the + authorization MUST be performed. */ + +#define TPM_NO_READ_PUBKEY_AUTH 0x03 /* This SHALL indicate that on commands that require the TPM to + use the the key, the authorization MUST be performed. For + commands that cause the TPM to read the public portion of the + key, but not to use the key (e.g. TPM_GetPubKey), the + authorization may be omitted. */ + +/* 5.10 TPM_KEY_FLAGS rev 110 + + This table defines the meanings of the bits in a TPM_KEY_FLAGS structure, used in + TPM_STORE_ASYMKEY and TPM_CERTIFY_INFO. + + The value of TPM_KEY_FLAGS MUST be decomposed into individual mask values. The presence of a mask + value SHALL have the effect described in the above table + + On input, all undefined bits MUST be zero. The TPM MUST return an error if any undefined bit is + set. On output, the TPM MUST set all undefined bits to zero. +*/ + +#ifdef TPM_V12 +#define TPM_KEY_FLAGS_MASK 0x0000001f +#else +#define TPM_KEY_FLAGS_MASK 0x00000007 +#endif + +#define TPM_REDIRECTION 0x00000001 /* This mask value SHALL indicate the use of redirected + output. */ + +#define TPM_MIGRATABLE 0x00000002 /* This mask value SHALL indicate that the key is + migratable. */ + +#define TPM_ISVOLATILE 0x00000004 /* This mask value SHALL indicate that the key MUST be + unloaded upon execution of the + TPM_Startup(ST_Clear). This does not indicate that a + non-volatile key will remain loaded across + TPM_Startup(ST_Clear) events. */ + +#define TPM_PCRIGNOREDONREAD 0x00000008 /* When TRUE the TPM MUST NOT check digestAtRelease or + localityAtRelease for commands that read the public + portion of the key (e.g., TPM_GetPubKey) and MAY NOT + check digestAtRelease or localityAtRelease for + commands that use the public portion of the key + (e.g. TPM_Seal) + + When FALSE the TPM MUST check digestAtRelease and + localityAtRelease for commands that read or use the + public portion of the key */ + +#define TPM_MIGRATEAUTHORITY 0x00000010 /* When set indicates that the key is under control of a + migration authority. The TPM MUST only allow the + creation of a key with this flag in + TPM_MA_CreateKey */ + +/* 5.17 TPM_CMK_DELEGATE values rev 89 + + The bits of TPM_CMK_DELEGATE are flags that determine how the TPM responds to delegated requests + to manipulate a certified-migration-key, a loaded key with payload type TPM_PT_MIGRATE_RESTRICTED + or TPM_PT_MIGRATE_EXTERNAL.. + + 26:0 reserved MUST be 0 + + The default value of TPM_CMK_Delegate is zero (0) +*/ + +#define TPM_CMK_DELEGATE_SIGNING 0x80000000 /* When set to 1, this bit SHALL indicate that a + delegated command may manipulate a CMK of + TPM_KEY_USAGE == TPM_KEY_SIGNING */ +#define TPM_CMK_DELEGATE_STORAGE 0x40000000 /* When set to 1, this bit SHALL indicate that a + delegated command may manipulate a CMK of + TPM_KEY_USAGE == TPM_KEY_STORAGE */ +#define TPM_CMK_DELEGATE_BIND 0x20000000 /* When set to 1, this bit SHALL indicate that a + delegated command may manipulate a CMK of + TPM_KEY_USAGE == TPM_KEY_BIND */ +#define TPM_CMK_DELEGATE_LEGACY 0x10000000 /* When set to 1, this bit SHALL indicate that a + delegated command may manipulate a CMK of + TPM_KEY_USAGE == TPM_KEY_LEGACY */ +#define TPM_CMK_DELEGATE_MIGRATE 0x08000000 /* When set to 1, this bit SHALL indicate that a + delegated command may manipulate a CMK of + TPM_KEY_USAGE == TPM_KEY_MIGRATE */ + +/* 6. TPM_TAG (Command and Response Tags) rev 100 + + These tags indicate to the TPM the construction of the command either as input or as output. The + AUTH indicates that there are one or more AuthData values that follow the command + parameters. +*/ + +#define TPM_TAG_RQU_COMMAND 0x00C1 /* A command with no authentication. */ +#define TPM_TAG_RQU_AUTH1_COMMAND 0x00C2 /* An authenticated command with one authentication + handle */ +#define TPM_TAG_RQU_AUTH2_COMMAND 0x00C3 /* An authenticated command with two authentication + handles */ +#define TPM_TAG_RSP_COMMAND 0x00C4 /* A response from a command with no authentication + */ +#define TPM_TAG_RSP_AUTH1_COMMAND 0x00C5 /* An authenticated response with one authentication + handle */ +#define TPM_TAG_RSP_AUTH2_COMMAND 0x00C6 /* An authenticated response with two authentication + handles */ + +/* TIS 7.2 PCR Attributes + +*/ + +#define TPM_DEBUG_PCR 16 +#define TPM_LOCALITY_4_PCR 17 +#define TPM_LOCALITY_3_PCR 18 +#define TPM_LOCALITY_2_PCR 19 +#define TPM_LOCALITY_1_PCR 20 + +/* 10.9 TPM_KEY_CONTROL rev 87 + + Attributes that can control various aspects of key usage and manipulation. + + Allows for controlling of the key when loaded and how to handle TPM_Startup issues. +*/ + +#define TPM_KEY_CONTROL_OWNER_EVICT 0x00000001 /* Owner controls when the key is evicted + from the TPM. When set the TPM MUST + preserve key the key across all TPM_Init + invocations. */ + +/* 13.1.1 TPM_TRANSPORT_ATTRIBUTES Definitions */ + +#define TPM_TRANSPORT_ENCRYPT 0x00000001 /* The session will provide encryption using + the internal encryption algorithm */ +#define TPM_TRANSPORT_LOG 0x00000002 /* The session will provide a log of all + operations that occur in the session */ +#define TPM_TRANSPORT_EXCLUSIVE 0X00000004 /* The transport session is exclusive and + any command executed outside the + transport session causes the invalidation + of the session */ + +/* 21.1 TPM_CAPABILITY_AREA rev 115 + + To identify a capability to be queried. +*/ + +#define TPM_CAP_ORD 0x00000001 /* Boolean value. TRUE indicates that the TPM supports + the ordinal. FALSE indicates that the TPM does not + support the ordinal. Unimplemented optional ordinals + and unused (unassigned) ordinals return FALSE. */ +#define TPM_CAP_ALG 0x00000002 /* Boolean value. TRUE means that the TPM supports the + asymmetric algorithm for TPM_Sign, TPM_Seal, + TPM_UnSeal and TPM_UnBind and related commands. FALSE + indicates that the asymmetric algorithm is not + supported for these types of commands. The TPM MAY + return TRUE or FALSE for other than asymmetric + algorithms that it supports. Unassigned and + unsupported algorithm IDs return FALSE.*/ + +#define TPM_CAP_PID 0x00000003 /* Boolean value. TRUE indicates that the TPM supports + the protocol, FALSE indicates that the TPM does not + support the protocol. */ +#define TPM_CAP_FLAG 0x00000004 /* Return the TPM_PERMANENT_FLAGS structure or Return the + TPM_STCLEAR_FLAGS structure */ +#define TPM_CAP_PROPERTY 0x00000005 /* See following table for the subcaps */ +#define TPM_CAP_VERSION 0x00000006 /* TPM_STRUCT_VER structure. The Major and Minor must + indicate 1.1. The firmware revision MUST indicate + 0.0 */ +#define TPM_CAP_KEY_HANDLE 0x00000007 /* A TPM_KEY_HANDLE_LIST structure that enumerates all + key handles loaded on the TPM. */ +#define TPM_CAP_CHECK_LOADED 0x00000008 /* A Boolean value. TRUE indicates that the TPM has + enough memory available to load a key of the type + specified by TPM_KEY_PARMS. FALSE indicates that the + TPM does not have enough memory. */ +#define TPM_CAP_SYM_MODE 0x00000009 /* Subcap TPM_SYM_MODE + A Boolean value. TRUE indicates that the TPM supports + the TPM_SYM_MODE, FALSE indicates the TPM does not + support the mode. */ +#define TPM_CAP_KEY_STATUS 0x0000000C /* Boolean value of ownerEvict. The handle MUST point to + a valid key handle.*/ +#define TPM_CAP_NV_LIST 0x0000000D /* A list of TPM_NV_INDEX values that are currently + allocated NV storage through TPM_NV_DefineSpace. */ +#define TPM_CAP_MFR 0x00000010 /* Manufacturer specific. The manufacturer may provide + any additional information regarding the TPM and the + TPM state but MUST not expose any sensitive + information. */ +#define TPM_CAP_NV_INDEX 0x00000011 /* A TPM_NV_DATA_PUBLIC structure that indicates the + values for the TPM_NV_INDEX. Returns TPM_BADINDEX if + the index is not in the TPM_CAP_NV_LIST list. */ +#define TPM_CAP_TRANS_ALG 0x00000012 /* Boolean value. TRUE means that the TPM supports the + algorithm for TPM_EstablishTransport, + TPM_ExecuteTransport and + TPM_ReleaseTransportSigned. FALSE indicates that for + these three commands the algorithm is not supported." + */ +#define TPM_CAP_HANDLE 0x00000014 /* A TPM_KEY_HANDLE_LIST structure that enumerates all + handles currently loaded in the TPM for the given + resource type. */ +#define TPM_CAP_TRANS_ES 0x00000015 /* Boolean value. TRUE means the TPM supports the + encryption scheme in a transport session for at least + one algorithm.. */ +#define TPM_CAP_AUTH_ENCRYPT 0x00000017 /* Boolean value. TRUE indicates that the TPM supports + the encryption algorithm in OSAP encryption of + AuthData values */ +#define TPM_CAP_SELECT_SIZE 0x00000018 /* Boolean value. TRUE indicates that the TPM supports + the size for the given version. For instance a request + could ask for version 1.1 size 2 and the TPM would + indicate TRUE. For 1.1 size 3 the TPM would indicate + FALSE. For 1.2 size 3 the TPM would indicate TRUE. */ +#define TPM_CAP_DA_LOGIC 0x00000019 /* (OPTIONAL) + A TPM_DA_INFO or TPM_DA_INFO_LIMITED structure that + returns data according to the selected entity type + (e.g., TPM_ET_KEYHANDLE, TPM_ET_OWNER, TPM_ET_SRK, + TPM_ET_COUNTER, TPM_ET_OPERATOR, etc.). If the + implemented dictionary attack logic does not support + different secret types, the entity type can be + ignored. */ +#define TPM_CAP_VERSION_VAL 0x0000001A /* TPM_CAP_VERSION_INFO structure. The TPM fills in the + structure and returns the information indicating what + the TPM currently supports. */ + +#define TPM_CAP_FLAG_PERMANENT 0x00000108 /* Return the TPM_PERMANENT_FLAGS structure */ +#define TPM_CAP_FLAG_VOLATILE 0x00000109 /* Return the TPM_STCLEAR_FLAGS structure */ + +/* 21.2 CAP_PROPERTY Subcap values for CAP_PROPERTY rev 105 + + The TPM_CAP_PROPERTY capability has numerous subcap values. The definition for all subcap values + occurs in this table. + + TPM_CAP_PROP_MANUFACTURER returns a vendor ID unique to each manufacturer. The same value is + returned as the TPM_CAP_VERSION_INFO -> tpmVendorID. A company abbreviation such as a null + terminated stock ticker is a typical choice. However, there is no requirement that the value + contain printable characters. The document "TCG Vendor Naming" lists the vendor ID values. + + TPM_CAP_PROP_MAX_xxxSESS is a constant. At TPM_Startup(ST_CLEAR) TPM_CAP_PROP_xxxSESS == + TPM_CAP_PROP_MAX_xxxSESS. As sessions are created on the TPM, TPM_CAP_PROP_xxxSESS decreases + toward zero. As sessions are terminated, TPM_CAP_PROP_xxxSESS increases toward + TPM_CAP_PROP_MAX_xxxSESS. + + There is a similar relationship between the constants TPM_CAP_PROP_MAX_COUNTERS and + TPM_CAP_PROP_MAX_CONTEXT and the varying TPM_CAP_PROP_COUNTERS and TPM_CAP_PROP_CONTEXT. + + In one typical implementation where authorization and transport sessions reside in separate + pools, TPM_CAP_PROP_SESSIONS will be the sum of TPM_CAP_PROP_AUTHSESS and TPM_CAP_PROP_TRANSESS. + In another typical implementation where authorization and transport sessions share the same pool, + TPM_CAP_PROP_SESSIONS, TPM_CAP_PROP_AUTHSESS, and TPM_CAP_PROP_TRANSESS will all be equal. +*/ + +#define TPM_CAP_PROP_PCR 0x00000101 /* uint32_t value. Returns the number of PCR + registers supported by the TPM */ +#define TPM_CAP_PROP_DIR 0x00000102 /* uint32_t. Deprecated. Returns the number of + DIR, which is now fixed at 1 */ +#define TPM_CAP_PROP_MANUFACTURER 0x00000103 /* uint32_t value. Returns the vendor ID + unique to each TPM manufacturer. */ +#define TPM_CAP_PROP_KEYS 0x00000104 /* uint32_t value. Returns the number of 2048- + bit RSA keys that can be loaded. This may + vary with time and circumstances. */ +#define TPM_CAP_PROP_MIN_COUNTER 0x00000107 /* uint32_t. The minimum amount of time in + 10ths of a second that must pass between + invocations of incrementing the monotonic + counter. */ +#define TPM_CAP_PROP_AUTHSESS 0x0000010A /* uint32_t. The number of available + authorization sessions. This may vary with + time and circumstances. */ +#define TPM_CAP_PROP_TRANSESS 0x0000010B /* uint32_t. The number of available transport + sessions. This may vary with time and + circumstances. */ +#define TPM_CAP_PROP_COUNTERS 0x0000010C /* uint32_t. The number of available monotonic + counters. This may vary with time and + circumstances. */ +#define TPM_CAP_PROP_MAX_AUTHSESS 0x0000010D /* uint32_t. The maximum number of loaded + authorization sessions the TPM supports */ +#define TPM_CAP_PROP_MAX_TRANSESS 0x0000010E /* uint32_t. The maximum number of loaded + transport sessions the TPM supports. */ +#define TPM_CAP_PROP_MAX_COUNTERS 0x0000010F /* uint32_t. The maximum number of monotonic + counters under control of TPM_CreateCounter + */ +#define TPM_CAP_PROP_MAX_KEYS 0x00000110 /* uint32_t. The maximum number of 2048 RSA + keys that the TPM can support. The number + does not include the EK or SRK. */ +#define TPM_CAP_PROP_OWNER 0x00000111 /* BOOL. A value of TRUE indicates that the + TPM has successfully installed an owner. */ +#define TPM_CAP_PROP_CONTEXT 0x00000112 /* uint32_t. The number of available saved + session slots. This may vary with time and + circumstances. */ +#define TPM_CAP_PROP_MAX_CONTEXT 0x00000113 /* uint32_t. The maximum number of saved + session slots. */ +#define TPM_CAP_PROP_FAMILYROWS 0x00000114 /* uint32_t. The maximum number of rows in the + family table */ +#define TPM_CAP_PROP_TIS_TIMEOUT 0x00000115 /* A 4 element array of uint32_t values each + denoting the timeout value in microseconds + for the following in this order: + + TIMEOUT_A, TIMEOUT_B, TIMEOUT_C, TIMEOUT_D + + Where these timeouts are to be used is + determined by the platform specific TPM + Interface Specification. */ +#define TPM_CAP_PROP_STARTUP_EFFECT 0x00000116 /* The TPM_STARTUP_EFFECTS structure */ +#define TPM_CAP_PROP_DELEGATE_ROW 0x00000117 /* uint32_t. The maximum size of the delegate + table in rows. */ +#define TPM_CAP_PROP_MAX_DAASESS 0x00000119 /* uint32_t. The maximum number of loaded DAA + sessions (join or sign) that the TPM + supports */ +#define TPM_CAP_PROP_DAASESS 0x0000011A /* uint32_t. The number of available DAA + sessions. This may vary with time and + circumstances */ +#define TPM_CAP_PROP_CONTEXT_DIST 0x0000011B /* uint32_t. The maximum distance between + context count values. This MUST be at least + 2^16-1. */ +#define TPM_CAP_PROP_DAA_INTERRUPT 0x0000011C /* BOOL. A value of TRUE indicates that the + TPM will accept ANY command while executing + a DAA Join or Sign. + + A value of FALSE indicates that the TPM + will invalidate the DAA Join or Sign upon + the receipt of any command other than the + next join/sign in the session or a + TPM_SaveContext */ +#define TPM_CAP_PROP_SESSIONS 0X0000011D /* uint32_t. The number of available sessions + from the pool. This MAY vary with time and + circumstances. Pool sessions include + authorization and transport sessions. */ +#define TPM_CAP_PROP_MAX_SESSIONS 0x0000011E /* uint32_t. The maximum number of sessions + the TPM supports. */ +#define TPM_CAP_PROP_CMK_RESTRICTION 0x0000011F /* uint32_t TPM_Permanent_Data -> + restrictDelegate + */ +#define TPM_CAP_PROP_DURATION 0x00000120 /* A 3 element array of uint32_t values each + denoting the duration value in microseconds + of the duration of the three classes of + commands: Small, Medium and Long in the + following in this order: SMALL_DURATION, + MEDIUM_DURATION, LONG_DURATION */ +#define TPM_CAP_PROP_ACTIVE_COUNTER 0x00000122 /* TPM_COUNT_ID. The id of the current + counter. 0xff..ff if no counter is active + */ +#define TPM_CAP_PROP_MAX_NV_AVAILABLE 0x00000123 /*uint32_t. Deprecated. The maximum number + of NV space that can be allocated, MAY + vary with time and circumstances. This + capability was not implemented + consistently, and is replaced by + TPM_NV_INDEX_TRIAL. */ +#define TPM_CAP_PROP_INPUT_BUFFER 0x00000124 /* uint32_t. The maximum size of the TPM + input buffer or output buffer in + bytes. */ + +/* 21.4 Set_Capability Values rev 107 + */ + +#define TPM_SET_PERM_FLAGS 0x00000001 /* The ability to set a value is field specific and + a review of the structure will disclose the + ability and requirements to set a value */ +#define TPM_SET_PERM_DATA 0x00000002 /* The ability to set a value is field specific and + a review of the structure will disclose the + ability and requirements to set a value */ +#define TPM_SET_STCLEAR_FLAGS 0x00000003 /* The ability to set a value is field specific and + a review of the structure will disclose the + ability and requirements to set a value */ +#define TPM_SET_STCLEAR_DATA 0x00000004 /* The ability to set a value is field specific and + a review of the structure will disclose the + ability and requirements to set a value */ +#define TPM_SET_STANY_FLAGS 0x00000005 /* The ability to set a value is field specific and + a review of the structure will disclose the + ability and requirements to set a value */ +#define TPM_SET_STANY_DATA 0x00000006 /* The ability to set a value is field specific and + a review of the structure will disclose the + ability and requirements to set a value */ +#define TPM_SET_VENDOR 0x00000007 /* This area allows the vendor to set specific areas + in the TPM according to the normal shielded + location requirements */ + +/* Set Capability sub caps */ + +/* TPM_PERMANENT_FLAGS */ + +#define TPM_PF_DISABLE 1 +#define TPM_PF_OWNERSHIP 2 +#define TPM_PF_DEACTIVATED 3 +#define TPM_PF_READPUBEK 4 +#define TPM_PF_DISABLEOWNERCLEAR 5 +#define TPM_PF_ALLOWMAINTENANCE 6 +#define TPM_PF_PHYSICALPRESENCELIFETIMELOCK 7 +#define TPM_PF_PHYSICALPRESENCEHWENABLE 8 +#define TPM_PF_PHYSICALPRESENCECMDENABLE 9 +#define TPM_PF_CEKPUSED 10 +#define TPM_PF_TPMPOST 11 +#define TPM_PF_TPMPOSTLOCK 12 +#define TPM_PF_FIPS 13 +#define TPM_PF_OPERATOR 14 +#define TPM_PF_ENABLEREVOKEEK 15 +#define TPM_PF_NV_LOCKED 16 +#define TPM_PF_READSRKPUB 17 +#define TPM_PF_TPMESTABLISHED 18 +#define TPM_PF_MAINTENANCEDONE 19 +#define TPM_PF_DISABLEFULLDALOGICINFO 20 + +/* TPM_STCLEAR_FLAGS */ + +#define TPM_SF_DEACTIVATED 1 +#define TPM_SF_DISABLEFORCECLEAR 2 +#define TPM_SF_PHYSICALPRESENCE 3 +#define TPM_SF_PHYSICALPRESENCELOCK 4 +#define TPM_SF_BGLOBALLOCK 5 + +/* TPM_STANY_FLAGS */ + +#define TPM_AF_POSTINITIALISE 1 +#define TPM_AF_LOCALITYMODIFIER 2 +#define TPM_AF_TRANSPORTEXCLUSIVE 3 +#define TPM_AF_TOSPRESENT 4 + +/* TPM_PERMANENT_DATA */ + +#define TPM_PD_REVMAJOR 1 +#define TPM_PD_REVMINOR 2 +#define TPM_PD_TPMPROOF 3 +#define TPM_PD_OWNERAUTH 4 +#define TPM_PD_OPERATORAUTH 5 +#define TPM_PD_MANUMAINTPUB 6 +#define TPM_PD_ENDORSEMENTKEY 7 +#define TPM_PD_SRK 8 +#define TPM_PD_DELEGATEKEY 9 +#define TPM_PD_CONTEXTKEY 10 +#define TPM_PD_AUDITMONOTONICCOUNTER 11 +#define TPM_PD_MONOTONICCOUNTER 12 +#define TPM_PD_PCRATTRIB 13 +#define TPM_PD_ORDINALAUDITSTATUS 14 +#define TPM_PD_AUTHDIR 15 +#define TPM_PD_RNGSTATE 16 +#define TPM_PD_FAMILYTABLE 17 +#define TPM_DELEGATETABLE 18 +#define TPM_PD_EKRESET 19 +#define TPM_PD_LASTFAMILYID 21 +#define TPM_PD_NOOWNERNVWRITE 22 +#define TPM_PD_RESTRICTDELEGATE 23 +#define TPM_PD_TPMDAASEED 24 +#define TPM_PD_DAAPROOF 25 + +/* TPM_STCLEAR_DATA */ + +#define TPM_SD_CONTEXTNONCEKEY 1 +#define TPM_SD_COUNTID 2 +#define TPM_SD_OWNERREFERENCE 3 +#define TPM_SD_DISABLERESETLOCK 4 +#define TPM_SD_PCR 5 +#define TPM_SD_DEFERREDPHYSICALPRESENCE 6 + +/* TPM_STCLEAR_DATA -> deferredPhysicalPresence bits */ + +#define TPM_DPP_UNOWNED_FIELD_UPGRADE 0x00000001 /* bit 0 TPM_FieldUpgrade */ + +/* TPM_STANY_DATA */ + +#define TPM_AD_CONTEXTNONCESESSION 1 +#define TPM_AD_AUDITDIGEST 2 +#define TPM_AD_CURRENTTICKS 3 +#define TPM_AD_CONTEXTCOUNT 4 +#define TPM_AD_CONTEXTLIST 5 +#define TPM_AD_SESSIONS 6 + +/* 17. Ordinals rev 110 + + Ordinals are 32 bit values of type TPM_COMMAND_CODE. The upper byte contains values that serve + as flag indicators, the next byte contains values indicating what committee designated the + ordinal, and the final two bytes contain the Command Ordinal Index. + + 3 2 1 + 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 + +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + |P|C|V| Reserved| Purview | Command Ordinal Index | + +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + + Where: + + P is Protected/Unprotected command. When 0 the command is a Protected command, when 1 the + command is an Unprotected command. + + C is Non-Connection/Connection related command. When 0 this command passes through to either the + protected (TPM) or unprotected (TSS) components. + + V is TPM/Vendor command. When 0 the command is TPM defined, when 1 the command is vendor + defined. + + All reserved area bits are set to 0. +*/ + +/* The following masks are created to allow for the quick definition of the commands */ + +#define TPM_PROTECTED_COMMAND 0x00000000 /* TPM protected command, specified in main specification + */ +#define TPM_UNPROTECTED_COMMAND 0x80000000 /* TSS command, specified in the TSS specification */ +#define TPM_CONNECTION_COMMAND 0x40000000 /* TSC command, protected connection commands are + specified in the main specification Unprotected + connection commands are specified in the TSS */ +#define TPM_VENDOR_COMMAND 0x20000000 /* Command that is vendor specific for a given TPM or + TSS. */ + + +/* The following Purviews have been defined: */ + +#define TPM_MAIN 0x00 /* Command is from the main specification */ +#define TPM_PC 0x01 /* Command is specific to the PC */ +#define TPM_PDA 0x02 /* Command is specific to a PDA */ +#define TPM_CELL_PHONE 0x03 /* Command is specific to a cell phone */ +#define TPM_SERVER 0x04 /* Command is specific to servers */ +#define TPM_PERIPHERAL 0x05 /* Command is specific to peripherals */ +#define TPM_TSS 0x06 /* Command is specific to TSS */ + +/* Combinations for the main specification would be: */ + +#define TPM_PROTECTED_ORDINAL (TPM_PROTECTED_COMMAND | TPM_MAIN) +#define TPM_UNPROTECTED_ORDINAL (TPM_UNPROTECTED_COMMAND | TPM_MAIN) +#define TPM_CONNECTION_ORDINAL (TPM_CONNECTION_COMMAND | TPM_MAIN) + +/* Command ordinals */ + +#define TPM_ORD_ActivateIdentity 0x0000007A +#define TPM_ORD_AuthorizeMigrationKey 0x0000002B +#define TPM_ORD_CertifyKey 0x00000032 +#define TPM_ORD_CertifyKey2 0x00000033 +#define TPM_ORD_CertifySelfTest 0x00000052 +#define TPM_ORD_ChangeAuth 0x0000000C +#define TPM_ORD_ChangeAuthAsymFinish 0x0000000F +#define TPM_ORD_ChangeAuthAsymStart 0x0000000E +#define TPM_ORD_ChangeAuthOwner 0x00000010 +#define TPM_ORD_CMK_ApproveMA 0x0000001D +#define TPM_ORD_CMK_ConvertMigration 0x00000024 +#define TPM_ORD_CMK_CreateBlob 0x0000001B +#define TPM_ORD_CMK_CreateKey 0x00000013 +#define TPM_ORD_CMK_CreateTicket 0x00000012 +#define TPM_ORD_CMK_SetRestrictions 0x0000001C +#define TPM_ORD_ContinueSelfTest 0x00000053 +#define TPM_ORD_ConvertMigrationBlob 0x0000002A +#define TPM_ORD_CreateCounter 0x000000DC +#define TPM_ORD_CreateEndorsementKeyPair 0x00000078 +#define TPM_ORD_CreateMaintenanceArchive 0x0000002C +#define TPM_ORD_CreateMigrationBlob 0x00000028 +#define TPM_ORD_CreateRevocableEK 0x0000007F +#define TPM_ORD_CreateWrapKey 0x0000001F +#define TPM_ORD_DAA_Join 0x00000029 +#define TPM_ORD_DAA_Sign 0x00000031 +#define TPM_ORD_Delegate_CreateKeyDelegation 0x000000D4 +#define TPM_ORD_Delegate_CreateOwnerDelegation 0x000000D5 +#define TPM_ORD_Delegate_LoadOwnerDelegation 0x000000D8 +#define TPM_ORD_Delegate_Manage 0x000000D2 +#define TPM_ORD_Delegate_ReadTable 0x000000DB +#define TPM_ORD_Delegate_UpdateVerification 0x000000D1 +#define TPM_ORD_Delegate_VerifyDelegation 0x000000D6 +#define TPM_ORD_DirRead 0x0000001A +#define TPM_ORD_DirWriteAuth 0x00000019 +#define TPM_ORD_DisableForceClear 0x0000005E +#define TPM_ORD_DisableOwnerClear 0x0000005C +#define TPM_ORD_DisablePubekRead 0x0000007E +#define TPM_ORD_DSAP 0x00000011 +#define TPM_ORD_EstablishTransport 0x000000E6 +#define TPM_ORD_EvictKey 0x00000022 +#define TPM_ORD_ExecuteTransport 0x000000E7 +#define TPM_ORD_Extend 0x00000014 +#define TPM_ORD_FieldUpgrade 0x000000AA +#define TPM_ORD_FlushSpecific 0x000000BA +#define TPM_ORD_ForceClear 0x0000005D +#define TPM_ORD_GetAuditDigest 0x00000085 +#define TPM_ORD_GetAuditDigestSigned 0x00000086 +#define TPM_ORD_GetAuditEvent 0x00000082 +#define TPM_ORD_GetAuditEventSigned 0x00000083 +#define TPM_ORD_GetCapability 0x00000065 +#define TPM_ORD_GetCapabilityOwner 0x00000066 +#define TPM_ORD_GetCapabilitySigned 0x00000064 +#define TPM_ORD_GetOrdinalAuditStatus 0x0000008C +#define TPM_ORD_GetPubKey 0x00000021 +#define TPM_ORD_GetRandom 0x00000046 +#define TPM_ORD_GetTestResult 0x00000054 +#define TPM_ORD_GetTicks 0x000000F1 +#define TPM_ORD_IncrementCounter 0x000000DD +#define TPM_ORD_Init 0x00000097 +#define TPM_ORD_KeyControlOwner 0x00000023 +#define TPM_ORD_KillMaintenanceFeature 0x0000002E +#define TPM_ORD_LoadAuthContext 0x000000B7 +#define TPM_ORD_LoadContext 0x000000B9 +#define TPM_ORD_LoadKey 0x00000020 +#define TPM_ORD_LoadKey2 0x00000041 +#define TPM_ORD_LoadKeyContext 0x000000B5 +#define TPM_ORD_LoadMaintenanceArchive 0x0000002D +#define TPM_ORD_LoadManuMaintPub 0x0000002F +#define TPM_ORD_MakeIdentity 0x00000079 +#define TPM_ORD_MigrateKey 0x00000025 +#define TPM_ORD_NV_DefineSpace 0x000000CC +#define TPM_ORD_NV_ReadValue 0x000000CF +#define TPM_ORD_NV_ReadValueAuth 0x000000D0 +#define TPM_ORD_NV_WriteValue 0x000000CD +#define TPM_ORD_NV_WriteValueAuth 0x000000CE +#define TPM_ORD_OIAP 0x0000000A +#define TPM_ORD_OSAP 0x0000000B +#define TPM_ORD_OwnerClear 0x0000005B +#define TPM_ORD_OwnerReadInternalPub 0x00000081 +#define TPM_ORD_OwnerReadPubek 0x0000007D +#define TPM_ORD_OwnerSetDisable 0x0000006E +#define TPM_ORD_PCR_Reset 0x000000C8 +#define TPM_ORD_PcrRead 0x00000015 +#define TPM_ORD_PhysicalDisable 0x00000070 +#define TPM_ORD_PhysicalEnable 0x0000006F +#define TPM_ORD_PhysicalSetDeactivated 0x00000072 +#define TPM_ORD_Quote 0x00000016 +#define TPM_ORD_Quote2 0x0000003E +#define TPM_ORD_ReadCounter 0x000000DE +#define TPM_ORD_ReadManuMaintPub 0x00000030 +#define TPM_ORD_ReadPubek 0x0000007C +#define TPM_ORD_ReleaseCounter 0x000000DF +#define TPM_ORD_ReleaseCounterOwner 0x000000E0 +#define TPM_ORD_ReleaseTransportSigned 0x000000E8 +#define TPM_ORD_Reset 0x0000005A +#define TPM_ORD_ResetLockValue 0x00000040 +#define TPM_ORD_RevokeTrust 0x00000080 +#define TPM_ORD_SaveAuthContext 0x000000B6 +#define TPM_ORD_SaveContext 0x000000B8 +#define TPM_ORD_SaveKeyContext 0x000000B4 +#define TPM_ORD_SaveState 0x00000098 +#define TPM_ORD_Seal 0x00000017 +#define TPM_ORD_Sealx 0x0000003D +#define TPM_ORD_SelfTestFull 0x00000050 +#define TPM_ORD_SetCapability 0x0000003F +#define TPM_ORD_SetOperatorAuth 0x00000074 +#define TPM_ORD_SetOrdinalAuditStatus 0x0000008D +#define TPM_ORD_SetOwnerInstall 0x00000071 +#define TPM_ORD_SetOwnerPointer 0x00000075 +#define TPM_ORD_SetRedirection 0x0000009A +#define TPM_ORD_SetTempDeactivated 0x00000073 +#define TPM_ORD_SHA1Complete 0x000000A2 +#define TPM_ORD_SHA1CompleteExtend 0x000000A3 +#define TPM_ORD_SHA1Start 0x000000A0 +#define TPM_ORD_SHA1Update 0x000000A1 +#define TPM_ORD_Sign 0x0000003C +#define TPM_ORD_Startup 0x00000099 +#define TPM_ORD_StirRandom 0x00000047 +#define TPM_ORD_TakeOwnership 0x0000000D +#define TPM_ORD_Terminate_Handle 0x00000096 +#define TPM_ORD_TickStampBlob 0x000000F2 +#define TPM_ORD_UnBind 0x0000001E +#define TPM_ORD_Unseal 0x00000018 + +#define TSC_ORD_PhysicalPresence 0x4000000A +#define TSC_ORD_ResetEstablishmentBit 0x4000000B + +/* 19. NV storage structures */ + +/* 19.1 TPM_NV_INDEX rev 110 + + The index provides the handle to identify the area of storage. The reserved bits allow for a + segregation of the index name space to avoid name collisions. + + The TPM may check the resvd bits for zero. Thus, applications should set the bits to zero. + + The TCG defines the space where the high order bits (T, P, U) are 0. The other spaces are + controlled by the indicated entity. + + T is the TPM manufacturer reserved bit. 0 indicates a TCG defined value. 1 indicates a TPM + manufacturer specific value. + + P is the platform manufacturer reserved bit. 0 indicates a TCG defined value. 1 indicates that + the index is controlled by the platform manufacturer. + + U is for the platform user. 0 indicates a TCG defined value. 1 indicates that the index is + controlled by the platform user. + + The TPM_NV_INDEX is a 32-bit value. + 3 2 1 + 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 + +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + |T|P|U|D| resvd | Purview | Index | + +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + + Where: + + 1. The TPM MAY return an error if the reserved area bits are not set to 0. + + 2. The TPM MUST accept all values for T, P, and U + + 3. D indicates defined. 1 indicates that the index is permanently defined and that any + TPM_NV_DefineSpace operation will fail after nvLocked is set TRUE. + + a. TCG reserved areas MAY have D set to 0 or 1 + + 4. Purview is the value used to indicate the platform specific area. This value is the + same as used for command ordinals. + + a. The TPM MUST reject purview values that the TPM cannot support. This means that an + index value for a PDA MUST be rejected by a TPM designed to work only on the PC Client. +*/ + +#define TPM_NV_INDEX_T_BIT 0x80000000 +#define TPM_NV_INDEX_P_BIT 0x40000000 +#define TPM_NV_INDEX_U_BIT 0x20000000 +#define TPM_NV_INDEX_D_BIT 0x10000000 +/* added kgold */ +#define TPM_NV_INDEX_RESVD 0x0f000000 +#define TPM_NV_INDEX_PURVIEW_BIT 16 +#define TPM_NV_INDEX_PURVIEW_MASK 0x00ff0000 + +/* 19.1.1 Required TPM_NV_INDEX values rev 97 + + The required index values must be found on each TPM regardless of platform. These areas are + always present and do not require a TPM_DefineSpace command to allocate. + + A platform specific specification may add additional required index values for the platform. + + The TPM MUST reserve the space as indicated for the required index values +*/ + +#define TPM_NV_INDEX_LOCK 0xFFFFFFFF /* This value turns on the NV authorization + protections. Once executed all NV areas use the + protections as defined. This value never resets. + + Attempting to execute TPM_NV_DefineSpace on this value + with non-zero size MAY result in a TPM_BADINDEX + response. + */ + +#define TPM_NV_INDEX0 0x00000000 /* This value allows for the setting of the bGlobalLock + flag, which is only reset on TPM_Startup(ST_Clear) + + Attempting to execute TPM_NV_WriteValue with a size other + than zero MAY result in the TPM_BADINDEX error code. + */ + +#define TPM_NV_INDEX_DIR 0x10000001 /* Size MUST be 20. This index points to the deprecated DIR + command area from 1.1. The TPM MUST map this reserved + space to be the area operated on by the 1.1 DIR commands. + */ + +/* 19.1.2 Reserved Index values rev 116 + + The reserved values are defined to avoid index collisions. These values are not in each and every + TPM. + + 1. The reserved index values are to avoid index value collisions. + 2. These index values require a TPM_DefineSpace to have the area for the index allocated + 3. A platform specific specification MAY indicate that reserved values are required. + 4. The reserved index values MAY have their D bit set by the TPM vendor to permanently +*/ + +#define TPM_NV_INDEX_TPM 0x0000Fxxx /* Reserved for TPM use */ +#define TPM_NV_INDEX_EKCert 0x0000F000 /* The Endorsement credential */ + +#define TPM_NV_INDEX_TPM_CC 0x0000F001 /* The TPM Conformance credential */ +#define TPM_NV_INDEX_PlatformCert 0x0000F002 /* The platform credential */ +#define TPM_NV_INDEX_Platform_CC 0x0000F003 /* The Platform conformance credential */ +#define TPM_NV_INDEX_TRIAL 0x0000F004 /* To try TPM_NV_DefineSpace without + actually allocating NV space */ + +#if 0 +#define TPM_NV_INDEX_PC 0x0001xxxx /* Reserved for PC Client use */ +#define TPM_NV_INDEX_GPIO_xx 0x000116xx /* Reserved for GPIO pins */ +#define TPM_NV_INDEX_PDA 0x0002xxxx /* Reserved for PDA use */ +#define TPM_NV_INDEX_MOBILE 0x0003xxxx /* Reserved for mobile use */ +#define TPM_NV_INDEX_SERVER 0x0004xxxx /* Reserved for Server use */ +#define TPM_NV_INDEX_PERIPHERAL 0x0005xxxx /* Reserved for peripheral use */ +#define TPM_NV_INDEX_TSS 0x0006xxxx /* Reserved for TSS use */ +#define TPM_NV_INDEX_GROUP_RESV 0x00xxxxxx /* Reserved for TCG WG use */ +#endif + +#define TPM_NV_INDEX_GPIO_00 0x00011600 /* GPIO-Express-00 */ + +#define TPM_NV_INDEX_GPIO_START 0x00011600 /* Reserved for GPIO pins */ +#define TPM_NV_INDEX_GPIO_END 0x000116ff /* Reserved for GPIO pins */ + +/* 19.2 TPM_NV_ATTRIBUTES rev 99 + + The attributes TPM_NV_PER_AUTHREAD and TPM_NV_PER_OWNERREAD cannot both be set to TRUE. + Similarly, the attributes TPM_NV_PER_AUTHWRITE and TPM_NV_PER_OWNERWRITE cannot both be set to + TRUE. +*/ + +#define TPM_NV_PER_READ_STCLEAR 0x80000000 /* 31: The value can be read until locked by a + read with a data size of 0. It can only be + unlocked by TPM_Startup(ST_Clear) or a + successful write. Lock held for each area in + bReadSTClear. */ +/* #define 30:19 Reserved */ +#define TPM_NV_PER_AUTHREAD 0x00040000 /* 18: The value requires authorization to read + */ +#define TPM_NV_PER_OWNERREAD 0x00020000 /* 17: The value requires TPM Owner authorization + to read. */ +#define TPM_NV_PER_PPREAD 0x00010000 /* 16: The value requires physical presence to + read */ +#define TPM_NV_PER_GLOBALLOCK 0x00008000 /* 15: The value is writable until a write to + index 0 is successful. The lock of this + attribute is reset by + TPM_Startup(ST_CLEAR). Lock held by SF -> + bGlobalLock */ +#define TPM_NV_PER_WRITE_STCLEAR 0x00004000 /* 14: The value is writable until a write to + the specified index with a datasize of 0 is + successful. The lock of this attribute is + reset by TPM_Startup(ST_CLEAR). Lock held for + each area in bWriteSTClear. */ +#define TPM_NV_PER_WRITEDEFINE 0x00002000 /* 13: Lock set by writing to the index with a + datasize of 0. Lock held for each area in + bWriteDefine. This is a persistent lock. */ +#define TPM_NV_PER_WRITEALL 0x00001000 /* 12: The value must be written in a single + operation */ +/* #define 11:3 Reserved for write additions */ +#define TPM_NV_PER_AUTHWRITE 0x00000004 /* 2: The value requires authorization to write + */ +#define TPM_NV_PER_OWNERWRITE 0x00000002 /* 1: The value requires TPM Owner authorization + to write */ +#define TPM_NV_PER_PPWRITE 0x00000001 /* 0: The value requires physical presence to + write */ + +/* 20.2.1 Owner Permission Settings rev 87 */ + +/* Per1 bits */ + +#define TPM_DELEGATE_PER1_MASK 0xffffffff /* mask of legal bits */ +#define TPM_DELEGATE_KeyControlOwner 31 +#define TPM_DELEGATE_SetOrdinalAuditStatus 30 +#define TPM_DELEGATE_DirWriteAuth 29 +#define TPM_DELEGATE_CMK_ApproveMA 28 +#define TPM_DELEGATE_NV_WriteValue 27 +#define TPM_DELEGATE_CMK_CreateTicket 26 +#define TPM_DELEGATE_NV_ReadValue 25 +#define TPM_DELEGATE_Delegate_LoadOwnerDelegation 24 +#define TPM_DELEGATE_DAA_Join 23 +#define TPM_DELEGATE_AuthorizeMigrationKey 22 +#define TPM_DELEGATE_CreateMaintenanceArchive 21 +#define TPM_DELEGATE_LoadMaintenanceArchive 20 +#define TPM_DELEGATE_KillMaintenanceFeature 19 +#define TPM_DELEGATE_OwnerReadInternalPub 18 +#define TPM_DELEGATE_ResetLockValue 17 +#define TPM_DELEGATE_OwnerClear 16 +#define TPM_DELEGATE_DisableOwnerClear 15 +#define TPM_DELEGATE_NV_DefineSpace 14 +#define TPM_DELEGATE_OwnerSetDisable 13 +#define TPM_DELEGATE_SetCapability 12 +#define TPM_DELEGATE_MakeIdentity 11 +#define TPM_DELEGATE_ActivateIdentity 10 +#define TPM_DELEGATE_OwnerReadPubek 9 +#define TPM_DELEGATE_DisablePubekRead 8 +#define TPM_DELEGATE_SetRedirection 7 +#define TPM_DELEGATE_FieldUpgrade 6 +#define TPM_DELEGATE_Delegate_UpdateVerification 5 +#define TPM_DELEGATE_CreateCounter 4 +#define TPM_DELEGATE_ReleaseCounterOwner 3 +#define TPM_DELEGATE_Delegate_Manage 2 +#define TPM_DELEGATE_Delegate_CreateOwnerDelegation 1 +#define TPM_DELEGATE_DAA_Sign 0 + +/* Per2 bits */ +#define TPM_DELEGATE_PER2_MASK 0x00000000 /* mask of legal bits */ +/* All reserved */ + +/* 20.2.3 Key Permission settings rev 85 */ + +/* Per1 bits */ + +#define TPM_KEY_DELEGATE_PER1_MASK 0x1fffffff /* mask of legal bits */ +#define TPM_KEY_DELEGATE_CMK_ConvertMigration 28 +#define TPM_KEY_DELEGATE_TickStampBlob 27 +#define TPM_KEY_DELEGATE_ChangeAuthAsymStart 26 +#define TPM_KEY_DELEGATE_ChangeAuthAsymFinish 25 +#define TPM_KEY_DELEGATE_CMK_CreateKey 24 +#define TPM_KEY_DELEGATE_MigrateKey 23 +#define TPM_KEY_DELEGATE_LoadKey2 22 +#define TPM_KEY_DELEGATE_EstablishTransport 21 +#define TPM_KEY_DELEGATE_ReleaseTransportSigned 20 +#define TPM_KEY_DELEGATE_Quote2 19 +#define TPM_KEY_DELEGATE_Sealx 18 +#define TPM_KEY_DELEGATE_MakeIdentity 17 +#define TPM_KEY_DELEGATE_ActivateIdentity 16 +#define TPM_KEY_DELEGATE_GetAuditDigestSigned 15 +#define TPM_KEY_DELEGATE_Sign 14 +#define TPM_KEY_DELEGATE_CertifyKey2 13 +#define TPM_KEY_DELEGATE_CertifyKey 12 +#define TPM_KEY_DELEGATE_CreateWrapKey 11 +#define TPM_KEY_DELEGATE_CMK_CreateBlob 10 +#define TPM_KEY_DELEGATE_CreateMigrationBlob 9 +#define TPM_KEY_DELEGATE_ConvertMigrationBlob 8 +#define TPM_KEY_DELEGATE_Delegate_CreateKeyDelegation 7 +#define TPM_KEY_DELEGATE_ChangeAuth 6 +#define TPM_KEY_DELEGATE_GetPubKey 5 +#define TPM_KEY_DELEGATE_UnBind 4 +#define TPM_KEY_DELEGATE_Quote 3 +#define TPM_KEY_DELEGATE_Unseal 2 +#define TPM_KEY_DELEGATE_Seal 1 +#define TPM_KEY_DELEGATE_LoadKey 0 + +/* Per2 bits */ +#define TPM_KEY_DELEGATE_PER2_MASK 0x00000000 /* mask of legal bits */ +/* All reserved */ + +/* 20.3 TPM_FAMILY_FLAGS rev 87 + + These flags indicate the operational state of the delegation and family table. These flags + are additions to TPM_PERMANENT_FLAGS and are not stand alone values. +*/ + +#define TPM_DELEGATE_ADMIN_LOCK 0x00000002 /* TRUE: Some TPM_Delegate_XXX commands are locked and + return TPM_DELEGATE_LOCK + + FALSE: TPM_Delegate_XXX commands are available + + Default is FALSE */ +#define TPM_FAMFLAG_ENABLED 0x00000001 /* When TRUE the table is enabled. The default value is + FALSE. */ + +/* 20.14 TPM_FAMILY_OPERATION Values rev 87 + + These are the opFlag values used by TPM_Delegate_Manage. +*/ + +#define TPM_FAMILY_CREATE 0x00000001 /* Create a new family */ +#define TPM_FAMILY_ENABLE 0x00000002 /* Set or reset the enable flag for this family. */ +#define TPM_FAMILY_ADMIN 0x00000003 /* Prevent administration of this family. */ +#define TPM_FAMILY_INVALIDATE 0x00000004 /* Invalidate a specific family row. */ + +/* 21.9 TPM_DA_STATE rev 100 + + TPM_DA_STATE enumerates the possible states of the dictionary attack mitigation logic. +*/ + +#define TPM_DA_STATE_INACTIVE 0x00 /* The dictionary attack mitigation logic is currently + inactive */ +#define TPM_DA_STATE_ACTIVE 0x01 /* The dictionary attack mitigation logic is + active. TPM_DA_ACTION_TYPE (21.10) is in progress. */ + +/* 21.10 TPM_DA_ACTION_TYPE rev 100 + */ + +/* 31-4 Reserved No information and MUST be FALSE */ + +#define TPM_DA_ACTION_FAILURE_MODE 0x00000008 /* bit 3: The TPM is in failure mode. */ +#define TPM_DA_ACTION_DEACTIVATE 0x00000004 /* bit 2: The TPM is in the deactivated state. */ +#define TPM_DA_ACTION_DISABLE 0x00000002 /* bit 1: The TPM is in the disabled state. */ +#define TPM_DA_ACTION_TIMEOUT 0x00000001 /* bit 0: The TPM will be in a locked state for + TPM_DA_INFO -> actionDependValue seconds. This + value is dynamic, depending on the time the + lock has been active. */ + +/* 22. DAA Structures rev 91 + + All byte and bit areas are byte arrays treated as large integers +*/ + +#define DAA_SIZE_r0 43 +#define DAA_SIZE_r1 43 +#define DAA_SIZE_r2 128 +#define DAA_SIZE_r3 168 +#define DAA_SIZE_r4 219 +#define DAA_SIZE_NT 20 +#define DAA_SIZE_v0 128 +#define DAA_SIZE_v1 192 +#define DAA_SIZE_NE 256 +#define DAA_SIZE_w 256 +#define DAA_SIZE_issuerModulus 256 + +/* check that DAA_SIZE_issuerModulus will fit in DAA_scratch */ +#if (DAA_SIZE_issuerModulus != 256) +#error "DAA_SIZE_issuerModulus must be 256" +#endif + +/* 22.2 Constant definitions rev 91 */ + +#define DAA_power0 104 +#define DAA_power1 1024 + +#endif |