diff options
Diffstat (limited to '')
| -rw-r--r-- | tests/modules/yang/iana-if-type@2014-05-08.yang | 1547 | ||||
| -rw-r--r-- | tests/modules/yang/ietf-interfaces@2014-05-08.yang | 725 | ||||
| -rw-r--r-- | tests/modules/yang/ietf-ip@2014-06-16.yang | 758 | ||||
| -rw-r--r-- | tests/modules/yang/ietf-netconf-acm@2018-02-14.yang | 464 | ||||
| -rw-r--r-- | tests/modules/yang/ietf-netconf-nmda@2019-01-07.yang | 385 | ||||
| -rw-r--r-- | tests/modules/yang/ietf-netconf-with-defaults@2011-06-01.yang | 140 | ||||
| -rw-r--r-- | tests/modules/yang/ietf-netconf@2011-06-01.yang | 934 | ||||
| -rw-r--r-- | tests/modules/yang/ietf-origin@2018-02-14.yang | 147 | ||||
| -rw-r--r-- | tests/modules/yang/ietf-restconf@2017-01-26.yang | 278 | ||||
| -rw-r--r-- | tests/modules/yang/notifications@2008-07-14.yang | 95 | ||||
| -rw-r--r-- | tests/modules/yang/sm-extension.yang | 17 | ||||
| -rw-r--r-- | tests/modules/yang/sm-mod.yang | 9 | ||||
| -rw-r--r-- | tests/modules/yang/sm-modp.yang | 24 | ||||
| -rw-r--r-- | tests/modules/yang/sm-rpcnotif.yang | 25 | ||||
| -rw-r--r-- | tests/modules/yang/sm.yang | 39 |
15 files changed, 5587 insertions, 0 deletions
diff --git a/tests/modules/yang/iana-if-type@2014-05-08.yang b/tests/modules/yang/iana-if-type@2014-05-08.yang new file mode 100644 index 0000000..5dd8219 --- /dev/null +++ b/tests/modules/yang/iana-if-type@2014-05-08.yang @@ -0,0 +1,1547 @@ +module iana-if-type { + namespace "urn:ietf:params:xml:ns:yang:iana-if-type"; + prefix ianaift; + + import ietf-interfaces { + prefix if; + } + + organization "IANA"; + contact + " Internet Assigned Numbers Authority + + Postal: ICANN + 4676 Admiralty Way, Suite 330 + Marina del Rey, CA 90292 + + Tel: +1 310 823 9358 + <mailto:iana@iana.org>"; + description + "This YANG module defines YANG identities for IANA-registered + interface types. + + This YANG module is maintained by IANA and reflects the + 'ifType definitions' registry. + + The latest revision of this YANG module can be obtained from + the IANA web site. + + Requests for new values should be made to IANA via + email (iana@iana.org). + + Copyright (c) 2014 IETF Trust and the persons identified as + authors of the code. All rights reserved. + + Redistribution and use in source and binary forms, with or + without modification, is permitted pursuant to, and subject + to the license terms contained in, the Simplified BSD License + set forth in Section 4.c of the IETF Trust's Legal Provisions + Relating to IETF Documents + (http://trustee.ietf.org/license-info). + + The initial version of this YANG module is part of RFC 7224; + see the RFC itself for full legal notices."; + reference + "IANA 'ifType definitions' registry. + <http://www.iana.org/assignments/smi-numbers>"; + + revision 2014-05-08 { + description + "Initial revision."; + reference + "RFC 7224: IANA Interface Type YANG Module"; + } + + identity iana-interface-type { + base if:interface-type; + description + "This identity is used as a base for all interface types + defined in the 'ifType definitions' registry."; + } + + + + + + + identity other { + base iana-interface-type; + } + identity regular1822 { + base iana-interface-type; + } + identity hdh1822 { + base iana-interface-type; + } + identity ddnX25 { + base iana-interface-type; + } + identity rfc877x25 { + base iana-interface-type; + reference + "RFC 1382 - SNMP MIB Extension for the X.25 Packet Layer"; + } + identity ethernetCsmacd { + base iana-interface-type; + description + "For all Ethernet-like interfaces, regardless of speed, + as per RFC 3635."; + reference + "RFC 3635 - Definitions of Managed Objects for the + Ethernet-like Interface Types"; + } + identity iso88023Csmacd { + base iana-interface-type; + status deprecated; + description + "Deprecated via RFC 3635. + Use ethernetCsmacd(6) instead."; + reference + "RFC 3635 - Definitions of Managed Objects for the + Ethernet-like Interface Types"; + } + identity iso88024TokenBus { + base iana-interface-type; + } + identity iso88025TokenRing { + base iana-interface-type; + } + identity iso88026Man { + base iana-interface-type; + } + identity starLan { + base iana-interface-type; + status deprecated; + description + "Deprecated via RFC 3635. + Use ethernetCsmacd(6) instead."; + reference + "RFC 3635 - Definitions of Managed Objects for the + Ethernet-like Interface Types"; + } + identity proteon10Mbit { + base iana-interface-type; + } + identity proteon80Mbit { + base iana-interface-type; + } + identity hyperchannel { + base iana-interface-type; + } + identity fddi { + base iana-interface-type; + reference + "RFC 1512 - FDDI Management Information Base"; + } + identity lapb { + base iana-interface-type; + reference + "RFC 1381 - SNMP MIB Extension for X.25 LAPB"; + } + identity sdlc { + base iana-interface-type; + } + identity ds1 { + base iana-interface-type; + description + "DS1-MIB."; + reference + "RFC 4805 - Definitions of Managed Objects for the + DS1, J1, E1, DS2, and E2 Interface Types"; + } + identity e1 { + base iana-interface-type; + status obsolete; + description + "Obsolete; see DS1-MIB."; + reference + "RFC 4805 - Definitions of Managed Objects for the + DS1, J1, E1, DS2, and E2 Interface Types"; + } + + + identity basicISDN { + base iana-interface-type; + description + "No longer used. See also RFC 2127."; + } + identity primaryISDN { + base iana-interface-type; + description + "No longer used. See also RFC 2127."; + } + identity propPointToPointSerial { + base iana-interface-type; + description + "Proprietary serial."; + } + identity ppp { + base iana-interface-type; + } + identity softwareLoopback { + base iana-interface-type; + } + identity eon { + base iana-interface-type; + description + "CLNP over IP."; + } + identity ethernet3Mbit { + base iana-interface-type; + } + identity nsip { + base iana-interface-type; + description + "XNS over IP."; + } + identity slip { + base iana-interface-type; + description + "Generic SLIP."; + } + identity ultra { + base iana-interface-type; + description + "Ultra Technologies."; + } + identity ds3 { + base iana-interface-type; + description + "DS3-MIB."; + reference + "RFC 3896 - Definitions of Managed Objects for the + DS3/E3 Interface Type"; + } + identity sip { + base iana-interface-type; + description + "SMDS, coffee."; + reference + "RFC 1694 - Definitions of Managed Objects for SMDS + Interfaces using SMIv2"; + } + identity frameRelay { + base iana-interface-type; + description + "DTE only."; + reference + "RFC 2115 - Management Information Base for Frame Relay + DTEs Using SMIv2"; + } + identity rs232 { + base iana-interface-type; + reference + "RFC 1659 - Definitions of Managed Objects for RS-232-like + Hardware Devices using SMIv2"; + } + identity para { + base iana-interface-type; + description + "Parallel-port."; + reference + "RFC 1660 - Definitions of Managed Objects for + Parallel-printer-like Hardware Devices using + SMIv2"; + } + identity arcnet { + base iana-interface-type; + description + "ARCnet."; + } + identity arcnetPlus { + base iana-interface-type; + description + "ARCnet Plus."; + } + + + + identity atm { + base iana-interface-type; + description + "ATM cells."; + } + identity miox25 { + base iana-interface-type; + reference + "RFC 1461 - SNMP MIB extension for Multiprotocol + Interconnect over X.25"; + } + identity sonet { + base iana-interface-type; + description + "SONET or SDH."; + } + identity x25ple { + base iana-interface-type; + reference + "RFC 2127 - ISDN Management Information Base using SMIv2"; + } + identity iso88022llc { + base iana-interface-type; + } + identity localTalk { + base iana-interface-type; + } + identity smdsDxi { + base iana-interface-type; + } + identity frameRelayService { + base iana-interface-type; + description + "FRNETSERV-MIB."; + reference + "RFC 2954 - Definitions of Managed Objects for Frame + Relay Service"; + } + identity v35 { + base iana-interface-type; + } + identity hssi { + base iana-interface-type; + } + identity hippi { + base iana-interface-type; + } + + identity modem { + base iana-interface-type; + description + "Generic modem."; + } + identity aal5 { + base iana-interface-type; + description + "AAL5 over ATM."; + } + identity sonetPath { + base iana-interface-type; + } + identity sonetVT { + base iana-interface-type; + } + identity smdsIcip { + base iana-interface-type; + description + "SMDS InterCarrier Interface."; + } + identity propVirtual { + base iana-interface-type; + description + "Proprietary virtual/internal."; + reference + "RFC 2863 - The Interfaces Group MIB"; + } + identity propMultiplexor { + base iana-interface-type; + description + "Proprietary multiplexing."; + reference + "RFC 2863 - The Interfaces Group MIB"; + } + identity ieee80212 { + base iana-interface-type; + description + "100BaseVG."; + } + identity fibreChannel { + base iana-interface-type; + description + "Fibre Channel."; + } + + + + identity hippiInterface { + base iana-interface-type; + description + "HIPPI interfaces."; + } + identity frameRelayInterconnect { + base iana-interface-type; + status obsolete; + description + "Obsolete; use either + frameRelay(32) or frameRelayService(44)."; + } + identity aflane8023 { + base iana-interface-type; + description + "ATM Emulated LAN for 802.3."; + } + identity aflane8025 { + base iana-interface-type; + description + "ATM Emulated LAN for 802.5."; + } + identity cctEmul { + base iana-interface-type; + description + "ATM Emulated circuit."; + } + identity fastEther { + base iana-interface-type; + status deprecated; + description + "Obsoleted via RFC 3635. + ethernetCsmacd(6) should be used instead."; + reference + "RFC 3635 - Definitions of Managed Objects for the + Ethernet-like Interface Types"; + } + identity isdn { + base iana-interface-type; + description + "ISDN and X.25."; + reference + "RFC 1356 - Multiprotocol Interconnect on X.25 and ISDN + in the Packet Mode"; + } + + + + identity v11 { + base iana-interface-type; + description + "CCITT V.11/X.21."; + } + identity v36 { + base iana-interface-type; + description + "CCITT V.36."; + } + identity g703at64k { + base iana-interface-type; + description + "CCITT G703 at 64Kbps."; + } + identity g703at2mb { + base iana-interface-type; + status obsolete; + description + "Obsolete; see DS1-MIB."; + } + identity qllc { + base iana-interface-type; + description + "SNA QLLC."; + } + identity fastEtherFX { + base iana-interface-type; + status deprecated; + description + "Obsoleted via RFC 3635. + ethernetCsmacd(6) should be used instead."; + reference + "RFC 3635 - Definitions of Managed Objects for the + Ethernet-like Interface Types"; + } + identity channel { + base iana-interface-type; + description + "Channel."; + } + identity ieee80211 { + base iana-interface-type; + description + "Radio spread spectrum."; + } + identity ibm370parChan { + base iana-interface-type; + description + "IBM System 360/370 OEMI Channel."; + } + identity escon { + base iana-interface-type; + description + "IBM Enterprise Systems Connection."; + } + identity dlsw { + base iana-interface-type; + description + "Data Link Switching."; + } + identity isdns { + base iana-interface-type; + description + "ISDN S/T interface."; + } + identity isdnu { + base iana-interface-type; + description + "ISDN U interface."; + } + identity lapd { + base iana-interface-type; + description + "Link Access Protocol D."; + } + identity ipSwitch { + base iana-interface-type; + description + "IP Switching Objects."; + } + identity rsrb { + base iana-interface-type; + description + "Remote Source Route Bridging."; + } + identity atmLogical { + base iana-interface-type; + description + "ATM Logical Port."; + reference + "RFC 3606 - Definitions of Supplemental Managed Objects + for ATM Interface"; + } + identity ds0 { + base iana-interface-type; + description + "Digital Signal Level 0."; + reference + "RFC 2494 - Definitions of Managed Objects for the DS0 + and DS0 Bundle Interface Type"; + } + identity ds0Bundle { + base iana-interface-type; + description + "Group of ds0s on the same ds1."; + reference + "RFC 2494 - Definitions of Managed Objects for the DS0 + and DS0 Bundle Interface Type"; + } + identity bsc { + base iana-interface-type; + description + "Bisynchronous Protocol."; + } + identity async { + base iana-interface-type; + description + "Asynchronous Protocol."; + } + identity cnr { + base iana-interface-type; + description + "Combat Net Radio."; + } + identity iso88025Dtr { + base iana-interface-type; + description + "ISO 802.5r DTR."; + } + identity eplrs { + base iana-interface-type; + description + "Ext Pos Loc Report Sys."; + } + identity arap { + base iana-interface-type; + description + "Appletalk Remote Access Protocol."; + } + identity propCnls { + base iana-interface-type; + description + "Proprietary Connectionless Protocol."; + } + identity hostPad { + base iana-interface-type; + description + "CCITT-ITU X.29 PAD Protocol."; + } + identity termPad { + base iana-interface-type; + description + "CCITT-ITU X.3 PAD Facility."; + } + identity frameRelayMPI { + base iana-interface-type; + description + "Multiproto Interconnect over FR."; + } + identity x213 { + base iana-interface-type; + description + "CCITT-ITU X213."; + } + identity adsl { + base iana-interface-type; + description + "Asymmetric Digital Subscriber Loop."; + } + identity radsl { + base iana-interface-type; + description + "Rate-Adapt. Digital Subscriber Loop."; + } + identity sdsl { + base iana-interface-type; + description + "Symmetric Digital Subscriber Loop."; + } + identity vdsl { + base iana-interface-type; + description + "Very H-Speed Digital Subscrib. Loop."; + } + identity iso88025CRFPInt { + base iana-interface-type; + description + "ISO 802.5 CRFP."; + } + identity myrinet { + base iana-interface-type; + description + "Myricom Myrinet."; + } + identity voiceEM { + base iana-interface-type; + description + "Voice recEive and transMit."; + } + identity voiceFXO { + base iana-interface-type; + description + "Voice Foreign Exchange Office."; + } + identity voiceFXS { + base iana-interface-type; + description + "Voice Foreign Exchange Station."; + } + identity voiceEncap { + base iana-interface-type; + description + "Voice encapsulation."; + } + identity voiceOverIp { + base iana-interface-type; + description + "Voice over IP encapsulation."; + } + identity atmDxi { + base iana-interface-type; + description + "ATM DXI."; + } + identity atmFuni { + base iana-interface-type; + description + "ATM FUNI."; + } + identity atmIma { + base iana-interface-type; + description + "ATM IMA."; + } + identity pppMultilinkBundle { + base iana-interface-type; + description + "PPP Multilink Bundle."; + } + identity ipOverCdlc { + base iana-interface-type; + description + "IBM ipOverCdlc."; + } + identity ipOverClaw { + base iana-interface-type; + description + "IBM Common Link Access to Workstn."; + } + identity stackToStack { + base iana-interface-type; + description + "IBM stackToStack."; + } + identity virtualIpAddress { + base iana-interface-type; + description + "IBM VIPA."; + } + identity mpc { + base iana-interface-type; + description + "IBM multi-protocol channel support."; + } + identity ipOverAtm { + base iana-interface-type; + description + "IBM ipOverAtm."; + reference + "RFC 2320 - Definitions of Managed Objects for Classical IP + and ARP Over ATM Using SMIv2 (IPOA-MIB)"; + } + identity iso88025Fiber { + base iana-interface-type; + description + "ISO 802.5j Fiber Token Ring."; + } + identity tdlc { + base iana-interface-type; + description + "IBM twinaxial data link control."; + } + identity gigabitEthernet { + base iana-interface-type; + status deprecated; + + + description + "Obsoleted via RFC 3635. + ethernetCsmacd(6) should be used instead."; + reference + "RFC 3635 - Definitions of Managed Objects for the + Ethernet-like Interface Types"; + } + identity hdlc { + base iana-interface-type; + description + "HDLC."; + } + identity lapf { + base iana-interface-type; + description + "LAP F."; + } + identity v37 { + base iana-interface-type; + description + "V.37."; + } + identity x25mlp { + base iana-interface-type; + description + "Multi-Link Protocol."; + } + identity x25huntGroup { + base iana-interface-type; + description + "X25 Hunt Group."; + } + identity transpHdlc { + base iana-interface-type; + description + "Transp HDLC."; + } + identity interleave { + base iana-interface-type; + description + "Interleave channel."; + } + identity fast { + base iana-interface-type; + description + "Fast channel."; + } + + identity ip { + base iana-interface-type; + description + "IP (for APPN HPR in IP networks)."; + } + identity docsCableMaclayer { + base iana-interface-type; + description + "CATV Mac Layer."; + } + identity docsCableDownstream { + base iana-interface-type; + description + "CATV Downstream interface."; + } + identity docsCableUpstream { + base iana-interface-type; + description + "CATV Upstream interface."; + } + identity a12MppSwitch { + base iana-interface-type; + description + "Avalon Parallel Processor."; + } + identity tunnel { + base iana-interface-type; + description + "Encapsulation interface."; + } + identity coffee { + base iana-interface-type; + description + "Coffee pot."; + reference + "RFC 2325 - Coffee MIB"; + } + identity ces { + base iana-interface-type; + description + "Circuit Emulation Service."; + } + identity atmSubInterface { + base iana-interface-type; + description + "ATM Sub Interface."; + } + + identity l2vlan { + base iana-interface-type; + description + "Layer 2 Virtual LAN using 802.1Q."; + } + identity l3ipvlan { + base iana-interface-type; + description + "Layer 3 Virtual LAN using IP."; + } + identity l3ipxvlan { + base iana-interface-type; + description + "Layer 3 Virtual LAN using IPX."; + } + identity digitalPowerline { + base iana-interface-type; + description + "IP over Power Lines."; + } + identity mediaMailOverIp { + base iana-interface-type; + description + "Multimedia Mail over IP."; + } + identity dtm { + base iana-interface-type; + description + "Dynamic synchronous Transfer Mode."; + } + identity dcn { + base iana-interface-type; + description + "Data Communications Network."; + } + identity ipForward { + base iana-interface-type; + description + "IP Forwarding Interface."; + } + identity msdsl { + base iana-interface-type; + description + "Multi-rate Symmetric DSL."; + } + identity ieee1394 { + base iana-interface-type; + + description + "IEEE1394 High Performance Serial Bus."; + } + identity if-gsn { + base iana-interface-type; + description + "HIPPI-6400."; + } + identity dvbRccMacLayer { + base iana-interface-type; + description + "DVB-RCC MAC Layer."; + } + identity dvbRccDownstream { + base iana-interface-type; + description + "DVB-RCC Downstream Channel."; + } + identity dvbRccUpstream { + base iana-interface-type; + description + "DVB-RCC Upstream Channel."; + } + identity atmVirtual { + base iana-interface-type; + description + "ATM Virtual Interface."; + } + identity mplsTunnel { + base iana-interface-type; + description + "MPLS Tunnel Virtual Interface."; + } + identity srp { + base iana-interface-type; + description + "Spatial Reuse Protocol."; + } + identity voiceOverAtm { + base iana-interface-type; + description + "Voice over ATM."; + } + identity voiceOverFrameRelay { + base iana-interface-type; + description + "Voice Over Frame Relay."; + } + identity idsl { + base iana-interface-type; + description + "Digital Subscriber Loop over ISDN."; + } + identity compositeLink { + base iana-interface-type; + description + "Avici Composite Link Interface."; + } + identity ss7SigLink { + base iana-interface-type; + description + "SS7 Signaling Link."; + } + identity propWirelessP2P { + base iana-interface-type; + description + "Prop. P2P wireless interface."; + } + identity frForward { + base iana-interface-type; + description + "Frame Forward Interface."; + } + identity rfc1483 { + base iana-interface-type; + description + "Multiprotocol over ATM AAL5."; + reference + "RFC 1483 - Multiprotocol Encapsulation over ATM + Adaptation Layer 5"; + } + identity usb { + base iana-interface-type; + description + "USB Interface."; + } + identity ieee8023adLag { + base iana-interface-type; + description + "IEEE 802.3ad Link Aggregate."; + } + identity bgppolicyaccounting { + base iana-interface-type; + description + "BGP Policy Accounting."; + } + identity frf16MfrBundle { + base iana-interface-type; + description + "FRF.16 Multilink Frame Relay."; + } + identity h323Gatekeeper { + base iana-interface-type; + description + "H323 Gatekeeper."; + } + identity h323Proxy { + base iana-interface-type; + description + "H323 Voice and Video Proxy."; + } + identity mpls { + base iana-interface-type; + description + "MPLS."; + } + identity mfSigLink { + base iana-interface-type; + description + "Multi-frequency signaling link."; + } + identity hdsl2 { + base iana-interface-type; + description + "High Bit-Rate DSL - 2nd generation."; + } + identity shdsl { + base iana-interface-type; + description + "Multirate HDSL2."; + } + identity ds1FDL { + base iana-interface-type; + description + "Facility Data Link (4Kbps) on a DS1."; + } + identity pos { + base iana-interface-type; + description + "Packet over SONET/SDH Interface."; + } + + + + identity dvbAsiIn { + base iana-interface-type; + description + "DVB-ASI Input."; + } + identity dvbAsiOut { + base iana-interface-type; + description + "DVB-ASI Output."; + } + identity plc { + base iana-interface-type; + description + "Power Line Communications."; + } + identity nfas { + base iana-interface-type; + description + "Non-Facility Associated Signaling."; + } + identity tr008 { + base iana-interface-type; + description + "TR008."; + } + identity gr303RDT { + base iana-interface-type; + description + "Remote Digital Terminal."; + } + identity gr303IDT { + base iana-interface-type; + description + "Integrated Digital Terminal."; + } + identity isup { + base iana-interface-type; + description + "ISUP."; + } + identity propDocsWirelessMaclayer { + base iana-interface-type; + description + "Cisco proprietary Maclayer."; + } + + + + identity propDocsWirelessDownstream { + base iana-interface-type; + description + "Cisco proprietary Downstream."; + } + identity propDocsWirelessUpstream { + base iana-interface-type; + description + "Cisco proprietary Upstream."; + } + identity hiperlan2 { + base iana-interface-type; + description + "HIPERLAN Type 2 Radio Interface."; + } + identity propBWAp2Mp { + base iana-interface-type; + description + "PropBroadbandWirelessAccesspt2Multipt (use of this value + for IEEE 802.16 WMAN interfaces as per IEEE Std 802.16f + is deprecated, and ieee80216WMAN(237) should be used + instead)."; + } + identity sonetOverheadChannel { + base iana-interface-type; + description + "SONET Overhead Channel."; + } + identity digitalWrapperOverheadChannel { + base iana-interface-type; + description + "Digital Wrapper."; + } + identity aal2 { + base iana-interface-type; + description + "ATM adaptation layer 2."; + } + identity radioMAC { + base iana-interface-type; + description + "MAC layer over radio links."; + } + identity atmRadio { + base iana-interface-type; + description + "ATM over radio links."; + } + identity imt { + base iana-interface-type; + description + "Inter-Machine Trunks."; + } + identity mvl { + base iana-interface-type; + description + "Multiple Virtual Lines DSL."; + } + identity reachDSL { + base iana-interface-type; + description + "Long Reach DSL."; + } + identity frDlciEndPt { + base iana-interface-type; + description + "Frame Relay DLCI End Point."; + } + identity atmVciEndPt { + base iana-interface-type; + description + "ATM VCI End Point."; + } + identity opticalChannel { + base iana-interface-type; + description + "Optical Channel."; + } + identity opticalTransport { + base iana-interface-type; + description + "Optical Transport."; + } + identity propAtm { + base iana-interface-type; + description + "Proprietary ATM."; + } + identity voiceOverCable { + base iana-interface-type; + description + "Voice Over Cable Interface."; + } + + + + identity infiniband { + base iana-interface-type; + description + "Infiniband."; + } + identity teLink { + base iana-interface-type; + description + "TE Link."; + } + identity q2931 { + base iana-interface-type; + description + "Q.2931."; + } + identity virtualTg { + base iana-interface-type; + description + "Virtual Trunk Group."; + } + identity sipTg { + base iana-interface-type; + description + "SIP Trunk Group."; + } + identity sipSig { + base iana-interface-type; + description + "SIP Signaling."; + } + identity docsCableUpstreamChannel { + base iana-interface-type; + description + "CATV Upstream Channel."; + } + identity econet { + base iana-interface-type; + description + "Acorn Econet."; + } + identity pon155 { + base iana-interface-type; + description + "FSAN 155Mb Symetrical PON interface."; + } + + + + identity pon622 { + base iana-interface-type; + description + "FSAN 622Mb Symetrical PON interface."; + } + identity bridge { + base iana-interface-type; + description + "Transparent bridge interface."; + } + identity linegroup { + base iana-interface-type; + description + "Interface common to multiple lines."; + } + identity voiceEMFGD { + base iana-interface-type; + description + "Voice E&M Feature Group D."; + } + identity voiceFGDEANA { + base iana-interface-type; + description + "Voice FGD Exchange Access North American."; + } + identity voiceDID { + base iana-interface-type; + description + "Voice Direct Inward Dialing."; + } + identity mpegTransport { + base iana-interface-type; + description + "MPEG transport interface."; + } + identity sixToFour { + base iana-interface-type; + status deprecated; + description + "6to4 interface (DEPRECATED)."; + reference + "RFC 4087 - IP Tunnel MIB"; + } + identity gtp { + base iana-interface-type; + description + "GTP (GPRS Tunneling Protocol)."; + } + identity pdnEtherLoop1 { + base iana-interface-type; + description + "Paradyne EtherLoop 1."; + } + identity pdnEtherLoop2 { + base iana-interface-type; + description + "Paradyne EtherLoop 2."; + } + identity opticalChannelGroup { + base iana-interface-type; + description + "Optical Channel Group."; + } + identity homepna { + base iana-interface-type; + description + "HomePNA ITU-T G.989."; + } + identity gfp { + base iana-interface-type; + description + "Generic Framing Procedure (GFP)."; + } + identity ciscoISLvlan { + base iana-interface-type; + description + "Layer 2 Virtual LAN using Cisco ISL."; + } + identity actelisMetaLOOP { + base iana-interface-type; + description + "Acteleis proprietary MetaLOOP High Speed Link."; + } + identity fcipLink { + base iana-interface-type; + description + "FCIP Link."; + } + identity rpr { + base iana-interface-type; + description + "Resilient Packet Ring Interface Type."; + } + + + + identity qam { + base iana-interface-type; + description + "RF Qam Interface."; + } + identity lmp { + base iana-interface-type; + description + "Link Management Protocol."; + reference + "RFC 4327 - Link Management Protocol (LMP) Management + Information Base (MIB)"; + } + identity cblVectaStar { + base iana-interface-type; + description + "Cambridge Broadband Networks Limited VectaStar."; + } + identity docsCableMCmtsDownstream { + base iana-interface-type; + description + "CATV Modular CMTS Downstream Interface."; + } + identity adsl2 { + base iana-interface-type; + status deprecated; + description + "Asymmetric Digital Subscriber Loop Version 2 + (DEPRECATED/OBSOLETED - please use adsl2plus(238) + instead)."; + reference + "RFC 4706 - Definitions of Managed Objects for Asymmetric + Digital Subscriber Line 2 (ADSL2)"; + } + identity macSecControlledIF { + base iana-interface-type; + description + "MACSecControlled."; + } + identity macSecUncontrolledIF { + base iana-interface-type; + description + "MACSecUncontrolled."; + } + identity aviciOpticalEther { + base iana-interface-type; + description + "Avici Optical Ethernet Aggregate."; + } + identity atmbond { + base iana-interface-type; + description + "atmbond."; + } + identity voiceFGDOS { + base iana-interface-type; + description + "Voice FGD Operator Services."; + } + identity mocaVersion1 { + base iana-interface-type; + description + "MultiMedia over Coax Alliance (MoCA) Interface + as documented in information provided privately to IANA."; + } + identity ieee80216WMAN { + base iana-interface-type; + description + "IEEE 802.16 WMAN interface."; + } + identity adsl2plus { + base iana-interface-type; + description + "Asymmetric Digital Subscriber Loop Version 2 - + Version 2 Plus and all variants."; + } + identity dvbRcsMacLayer { + base iana-interface-type; + description + "DVB-RCS MAC Layer."; + reference + "RFC 5728 - The SatLabs Group DVB-RCS MIB"; + } + identity dvbTdm { + base iana-interface-type; + description + "DVB Satellite TDM."; + reference + "RFC 5728 - The SatLabs Group DVB-RCS MIB"; + } + identity dvbRcsTdma { + base iana-interface-type; + description + "DVB-RCS TDMA."; + reference + "RFC 5728 - The SatLabs Group DVB-RCS MIB"; + } + identity x86Laps { + base iana-interface-type; + description + "LAPS based on ITU-T X.86/Y.1323."; + } + identity wwanPP { + base iana-interface-type; + description + "3GPP WWAN."; + } + identity wwanPP2 { + base iana-interface-type; + description + "3GPP2 WWAN."; + } + identity voiceEBS { + base iana-interface-type; + description + "Voice P-phone EBS physical interface."; + } + identity ifPwType { + base iana-interface-type; + description + "Pseudowire interface type."; + reference + "RFC 5601 - Pseudowire (PW) Management Information Base (MIB)"; + } + identity ilan { + base iana-interface-type; + description + "Internal LAN on a bridge per IEEE 802.1ap."; + } + identity pip { + base iana-interface-type; + description + "Provider Instance Port on a bridge per IEEE 802.1ah PBB."; + } + identity aluELP { + base iana-interface-type; + description + "Alcatel-Lucent Ethernet Link Protection."; + } + identity gpon { + base iana-interface-type; + description + "Gigabit-capable passive optical networks (G-PON) as per + ITU-T G.948."; + } + identity vdsl2 { + base iana-interface-type; + description + "Very high speed digital subscriber line Version 2 + (as per ITU-T Recommendation G.993.2)."; + reference + "RFC 5650 - Definitions of Managed Objects for Very High + Speed Digital Subscriber Line 2 (VDSL2)"; + } + identity capwapDot11Profile { + base iana-interface-type; + description + "WLAN Profile Interface."; + reference + "RFC 5834 - Control and Provisioning of Wireless Access + Points (CAPWAP) Protocol Binding MIB for + IEEE 802.11"; + } + identity capwapDot11Bss { + base iana-interface-type; + description + "WLAN BSS Interface."; + reference + "RFC 5834 - Control and Provisioning of Wireless Access + Points (CAPWAP) Protocol Binding MIB for + IEEE 802.11"; + } + identity capwapWtpVirtualRadio { + base iana-interface-type; + description + "WTP Virtual Radio Interface."; + reference + "RFC 5833 - Control and Provisioning of Wireless Access + Points (CAPWAP) Protocol Base MIB"; + } + identity bits { + base iana-interface-type; + description + "bitsport."; + } + identity docsCableUpstreamRfPort { + base iana-interface-type; + description + "DOCSIS CATV Upstream RF Port."; + } + + + identity cableDownstreamRfPort { + base iana-interface-type; + description + "CATV downstream RF Port."; + } + identity vmwareVirtualNic { + base iana-interface-type; + description + "VMware Virtual Network Interface."; + } + identity ieee802154 { + base iana-interface-type; + description + "IEEE 802.15.4 WPAN interface."; + reference + "IEEE 802.15.4-2006"; + } + identity otnOdu { + base iana-interface-type; + description + "OTN Optical Data Unit."; + } + identity otnOtu { + base iana-interface-type; + description + "OTN Optical channel Transport Unit."; + } + identity ifVfiType { + base iana-interface-type; + description + "VPLS Forwarding Instance Interface Type."; + } + identity g9981 { + base iana-interface-type; + description + "G.998.1 bonded interface."; + } + identity g9982 { + base iana-interface-type; + description + "G.998.2 bonded interface."; + } + identity g9983 { + base iana-interface-type; + description + "G.998.3 bonded interface."; + } + + identity aluEpon { + base iana-interface-type; + description + "Ethernet Passive Optical Networks (E-PON)."; + } + identity aluEponOnu { + base iana-interface-type; + description + "EPON Optical Network Unit."; + } + identity aluEponPhysicalUni { + base iana-interface-type; + description + "EPON physical User to Network interface."; + } + identity aluEponLogicalLink { + base iana-interface-type; + description + "The emulation of a point-to-point link over the EPON + layer."; + } + identity aluGponOnu { + base iana-interface-type; + description + "GPON Optical Network Unit."; + reference + "ITU-T G.984.2"; + } + identity aluGponPhysicalUni { + base iana-interface-type; + description + "GPON physical User to Network interface."; + reference + "ITU-T G.984.2"; + } + identity vmwareNicTeam { + base iana-interface-type; + description + "VMware NIC Team."; + } +} diff --git a/tests/modules/yang/ietf-interfaces@2014-05-08.yang b/tests/modules/yang/ietf-interfaces@2014-05-08.yang new file mode 100644 index 0000000..ad64425 --- /dev/null +++ b/tests/modules/yang/ietf-interfaces@2014-05-08.yang @@ -0,0 +1,725 @@ +module ietf-interfaces { + + namespace "urn:ietf:params:xml:ns:yang:ietf-interfaces"; + prefix if; + + import ietf-yang-types { + prefix yang; + } + + organization + "IETF NETMOD (NETCONF Data Modeling Language) Working Group"; + + contact + "WG Web: <http://tools.ietf.org/wg/netmod/> + WG List: <mailto:netmod@ietf.org> + + WG Chair: Thomas Nadeau + <mailto:tnadeau@lucidvision.com> + + WG Chair: Juergen Schoenwaelder + <mailto:j.schoenwaelder@jacobs-university.de> + + Editor: Martin Bjorklund + <mailto:mbj@tail-f.com>"; + + description + "This module contains a collection of YANG definitions for + managing network interfaces. + + Copyright (c) 2014 IETF Trust and the persons identified as + authors of the code. All rights reserved. + + Redistribution and use in source and binary forms, with or + without modification, is permitted pursuant to, and subject + to the license terms contained in, the Simplified BSD License + set forth in Section 4.c of the IETF Trust's Legal Provisions + Relating to IETF Documents + (http://trustee.ietf.org/license-info). + + This version of this YANG module is part of RFC 7223; see + the RFC itself for full legal notices."; + + revision 2014-05-08 { + description + "Initial revision."; + reference + "RFC 7223: A YANG Data Model for Interface Management"; + } + + /* + * Typedefs + */ + + typedef interface-ref { + type leafref { + path "/if:interfaces/if:interface/if:name"; + } + description + "This type is used by data models that need to reference + configured interfaces."; + } + + typedef interface-state-ref { + type leafref { + path "/if:interfaces-state/if:interface/if:name"; + } + description + "This type is used by data models that need to reference + the operationally present interfaces."; + } + + /* + * Identities + */ + + identity interface-type { + description + "Base identity from which specific interface types are + derived."; + } + + /* + * Features + */ + + feature arbitrary-names { + description + "This feature indicates that the device allows user-controlled + interfaces to be named arbitrarily."; + } + feature pre-provisioning { + description + "This feature indicates that the device supports + pre-provisioning of interface configuration, i.e., it is + possible to configure an interface whose physical interface + hardware is not present on the device."; + } + + feature if-mib { + description + "This feature indicates that the device implements + the IF-MIB."; + reference + "RFC 2863: The Interfaces Group MIB"; + } + + /* + * Configuration data nodes + */ + + container interfaces { + description + "Interface configuration parameters."; + + list interface { + key "name"; + + description + "The list of configured interfaces on the device. + + The operational state of an interface is available in the + /interfaces-state/interface list. If the configuration of a + system-controlled interface cannot be used by the system + (e.g., the interface hardware present does not match the + interface type), then the configuration is not applied to + the system-controlled interface shown in the + /interfaces-state/interface list. If the configuration + of a user-controlled interface cannot be used by the system, + the configured interface is not instantiated in the + /interfaces-state/interface list."; + + leaf name { + type string; + description + "The name of the interface. + + A device MAY restrict the allowed values for this leaf, + possibly depending on the type of the interface. + For system-controlled interfaces, this leaf is the + device-specific name of the interface. The 'config false' + list /interfaces-state/interface contains the currently + existing interfaces on the device. + + If a client tries to create configuration for a + system-controlled interface that is not present in the + /interfaces-state/interface list, the server MAY reject + the request if the implementation does not support + pre-provisioning of interfaces or if the name refers to + an interface that can never exist in the system. A + NETCONF server MUST reply with an rpc-error with the + error-tag 'invalid-value' in this case. + + If the device supports pre-provisioning of interface + configuration, the 'pre-provisioning' feature is + advertised. + + If the device allows arbitrarily named user-controlled + interfaces, the 'arbitrary-names' feature is advertised. + + When a configured user-controlled interface is created by + the system, it is instantiated with the same name in the + /interface-state/interface list."; + } + + leaf description { + type string; + description + "A textual description of the interface. + + A server implementation MAY map this leaf to the ifAlias + MIB object. Such an implementation needs to use some + mechanism to handle the differences in size and characters + allowed between this leaf and ifAlias. The definition of + such a mechanism is outside the scope of this document. + + Since ifAlias is defined to be stored in non-volatile + storage, the MIB implementation MUST map ifAlias to the + value of 'description' in the persistently stored + datastore. + + Specifically, if the device supports ':startup', when + ifAlias is read the device MUST return the value of + 'description' in the 'startup' datastore, and when it is + written, it MUST be written to the 'running' and 'startup' + datastores. Note that it is up to the implementation to + + decide whether to modify this single leaf in 'startup' or + perform an implicit copy-config from 'running' to + 'startup'. + + If the device does not support ':startup', ifAlias MUST + be mapped to the 'description' leaf in the 'running' + datastore."; + reference + "RFC 2863: The Interfaces Group MIB - ifAlias"; + } + + leaf type { + type identityref { + base interface-type; + } + mandatory true; + description + "The type of the interface. + + When an interface entry is created, a server MAY + initialize the type leaf with a valid value, e.g., if it + is possible to derive the type from the name of the + interface. + + If a client tries to set the type of an interface to a + value that can never be used by the system, e.g., if the + type is not supported or if the type does not match the + name of the interface, the server MUST reject the request. + A NETCONF server MUST reply with an rpc-error with the + error-tag 'invalid-value' in this case."; + reference + "RFC 2863: The Interfaces Group MIB - ifType"; + } + + leaf enabled { + type boolean; + default "true"; + description + "This leaf contains the configured, desired state of the + interface. + + Systems that implement the IF-MIB use the value of this + leaf in the 'running' datastore to set + IF-MIB.ifAdminStatus to 'up' or 'down' after an ifEntry + has been initialized, as described in RFC 2863. + + + + Changes in this leaf in the 'running' datastore are + reflected in ifAdminStatus, but if ifAdminStatus is + changed over SNMP, this leaf is not affected."; + reference + "RFC 2863: The Interfaces Group MIB - ifAdminStatus"; + } + + leaf link-up-down-trap-enable { + if-feature if-mib; + type enumeration { + enum enabled { + value 1; + } + enum disabled { + value 2; + } + } + description + "Controls whether linkUp/linkDown SNMP notifications + should be generated for this interface. + + If this node is not configured, the value 'enabled' is + operationally used by the server for interfaces that do + not operate on top of any other interface (i.e., there are + no 'lower-layer-if' entries), and 'disabled' otherwise."; + reference + "RFC 2863: The Interfaces Group MIB - + ifLinkUpDownTrapEnable"; + } + } + } + + /* + * Operational state data nodes + */ + + container interfaces-state { + config false; + description + "Data nodes for the operational state of interfaces."; + + list interface { + key "name"; + + + + + + description + "The list of interfaces on the device. + + System-controlled interfaces created by the system are + always present in this list, whether they are configured or + not."; + + leaf name { + type string; + description + "The name of the interface. + + A server implementation MAY map this leaf to the ifName + MIB object. Such an implementation needs to use some + mechanism to handle the differences in size and characters + allowed between this leaf and ifName. The definition of + such a mechanism is outside the scope of this document."; + reference + "RFC 2863: The Interfaces Group MIB - ifName"; + } + + leaf type { + type identityref { + base interface-type; + } + mandatory true; + description + "The type of the interface."; + reference + "RFC 2863: The Interfaces Group MIB - ifType"; + } + + leaf admin-status { + if-feature if-mib; + type enumeration { + enum up { + value 1; + description + "Ready to pass packets."; + } + enum down { + value 2; + description + "Not ready to pass packets and not in some test mode."; + } + + + + enum testing { + value 3; + description + "In some test mode."; + } + } + mandatory true; + description + "The desired state of the interface. + + This leaf has the same read semantics as ifAdminStatus."; + reference + "RFC 2863: The Interfaces Group MIB - ifAdminStatus"; + } + + leaf oper-status { + type enumeration { + enum up { + value 1; + description + "Ready to pass packets."; + } + enum down { + value 2; + description + "The interface does not pass any packets."; + } + enum testing { + value 3; + description + "In some test mode. No operational packets can + be passed."; + } + enum unknown { + value 4; + description + "Status cannot be determined for some reason."; + } + enum dormant { + value 5; + description + "Waiting for some external event."; + } + enum not-present { + value 6; + description + "Some component (typically hardware) is missing."; + } + enum lower-layer-down { + value 7; + description + "Down due to state of lower-layer interface(s)."; + } + } + mandatory true; + description + "The current operational state of the interface. + + This leaf has the same semantics as ifOperStatus."; + reference + "RFC 2863: The Interfaces Group MIB - ifOperStatus"; + } + + leaf last-change { + type yang:date-and-time; + description + "The time the interface entered its current operational + state. If the current state was entered prior to the + last re-initialization of the local network management + subsystem, then this node is not present."; + reference + "RFC 2863: The Interfaces Group MIB - ifLastChange"; + } + + leaf if-index { + if-feature if-mib; + type int32 { + range "1..2147483647"; + } + mandatory true; + description + "The ifIndex value for the ifEntry represented by this + interface."; + reference + "RFC 2863: The Interfaces Group MIB - ifIndex"; + } + + leaf phys-address { + type yang:phys-address; + description + "The interface's address at its protocol sub-layer. For + example, for an 802.x interface, this object normally + contains a Media Access Control (MAC) address. The + interface's media-specific modules must define the bit + + + and byte ordering and the format of the value of this + object. For interfaces that do not have such an address + (e.g., a serial line), this node is not present."; + reference + "RFC 2863: The Interfaces Group MIB - ifPhysAddress"; + } + + leaf-list higher-layer-if { + type interface-state-ref; + description + "A list of references to interfaces layered on top of this + interface."; + reference + "RFC 2863: The Interfaces Group MIB - ifStackTable"; + } + + leaf-list lower-layer-if { + type interface-state-ref; + description + "A list of references to interfaces layered underneath this + interface."; + reference + "RFC 2863: The Interfaces Group MIB - ifStackTable"; + } + + leaf speed { + type yang:gauge64; + units "bits/second"; + description + "An estimate of the interface's current bandwidth in bits + per second. For interfaces that do not vary in + bandwidth or for those where no accurate estimation can + be made, this node should contain the nominal bandwidth. + For interfaces that have no concept of bandwidth, this + node is not present."; + reference + "RFC 2863: The Interfaces Group MIB - + ifSpeed, ifHighSpeed"; + } + + + + + + + + + + container statistics { + description + "A collection of interface-related statistics objects."; + + leaf discontinuity-time { + type yang:date-and-time; + mandatory true; + description + "The time on the most recent occasion at which any one or + more of this interface's counters suffered a + discontinuity. If no such discontinuities have occurred + since the last re-initialization of the local management + subsystem, then this node contains the time the local + management subsystem re-initialized itself."; + } + + leaf in-octets { + type yang:counter64; + description + "The total number of octets received on the interface, + including framing characters. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system, and at + other times as indicated by the value of + 'discontinuity-time'."; + reference + "RFC 2863: The Interfaces Group MIB - ifHCInOctets"; + } + + leaf in-unicast-pkts { + type yang:counter64; + description + "The number of packets, delivered by this sub-layer to a + higher (sub-)layer, that were not addressed to a + multicast or broadcast address at this sub-layer. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system, and at + other times as indicated by the value of + 'discontinuity-time'."; + reference + "RFC 2863: The Interfaces Group MIB - ifHCInUcastPkts"; + } + + + + + leaf in-broadcast-pkts { + type yang:counter64; + description + "The number of packets, delivered by this sub-layer to a + higher (sub-)layer, that were addressed to a broadcast + address at this sub-layer. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system, and at + other times as indicated by the value of + 'discontinuity-time'."; + reference + "RFC 2863: The Interfaces Group MIB - + ifHCInBroadcastPkts"; + } + + leaf in-multicast-pkts { + type yang:counter64; + description + "The number of packets, delivered by this sub-layer to a + higher (sub-)layer, that were addressed to a multicast + address at this sub-layer. For a MAC-layer protocol, + this includes both Group and Functional addresses. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system, and at + other times as indicated by the value of + 'discontinuity-time'."; + reference + "RFC 2863: The Interfaces Group MIB - + ifHCInMulticastPkts"; + } + + leaf in-discards { + type yang:counter32; + description + "The number of inbound packets that were chosen to be + discarded even though no errors had been detected to + prevent their being deliverable to a higher-layer + protocol. One possible reason for discarding such a + packet could be to free up buffer space. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system, and at + other times as indicated by the value of + 'discontinuity-time'."; + + + reference + "RFC 2863: The Interfaces Group MIB - ifInDiscards"; + } + + leaf in-errors { + type yang:counter32; + description + "For packet-oriented interfaces, the number of inbound + packets that contained errors preventing them from being + deliverable to a higher-layer protocol. For character- + oriented or fixed-length interfaces, the number of + inbound transmission units that contained errors + preventing them from being deliverable to a higher-layer + protocol. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system, and at + other times as indicated by the value of + 'discontinuity-time'."; + reference + "RFC 2863: The Interfaces Group MIB - ifInErrors"; + } + + leaf in-unknown-protos { + type yang:counter32; + description + "For packet-oriented interfaces, the number of packets + received via the interface that were discarded because + of an unknown or unsupported protocol. For + character-oriented or fixed-length interfaces that + support protocol multiplexing, the number of + transmission units received via the interface that were + discarded because of an unknown or unsupported protocol. + For any interface that does not support protocol + multiplexing, this counter is not present. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system, and at + other times as indicated by the value of + 'discontinuity-time'."; + reference + "RFC 2863: The Interfaces Group MIB - ifInUnknownProtos"; + } + + + + + + leaf out-octets { + type yang:counter64; + description + "The total number of octets transmitted out of the + interface, including framing characters. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system, and at + other times as indicated by the value of + 'discontinuity-time'."; + reference + "RFC 2863: The Interfaces Group MIB - ifHCOutOctets"; + } + + leaf out-unicast-pkts { + type yang:counter64; + description + "The total number of packets that higher-level protocols + requested be transmitted, and that were not addressed + to a multicast or broadcast address at this sub-layer, + including those that were discarded or not sent. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system, and at + other times as indicated by the value of + 'discontinuity-time'."; + reference + "RFC 2863: The Interfaces Group MIB - ifHCOutUcastPkts"; + } + + leaf out-broadcast-pkts { + type yang:counter64; + description + "The total number of packets that higher-level protocols + requested be transmitted, and that were addressed to a + broadcast address at this sub-layer, including those + that were discarded or not sent. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system, and at + other times as indicated by the value of + 'discontinuity-time'."; + reference + "RFC 2863: The Interfaces Group MIB - + ifHCOutBroadcastPkts"; + } + + + leaf out-multicast-pkts { + type yang:counter64; + description + "The total number of packets that higher-level protocols + requested be transmitted, and that were addressed to a + multicast address at this sub-layer, including those + that were discarded or not sent. For a MAC-layer + protocol, this includes both Group and Functional + addresses. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system, and at + other times as indicated by the value of + 'discontinuity-time'."; + reference + "RFC 2863: The Interfaces Group MIB - + ifHCOutMulticastPkts"; + } + + leaf out-discards { + type yang:counter32; + description + "The number of outbound packets that were chosen to be + discarded even though no errors had been detected to + prevent their being transmitted. One possible reason + for discarding such a packet could be to free up buffer + space. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system, and at + other times as indicated by the value of + 'discontinuity-time'."; + reference + "RFC 2863: The Interfaces Group MIB - ifOutDiscards"; + } + + leaf out-errors { + type yang:counter32; + description + "For packet-oriented interfaces, the number of outbound + packets that could not be transmitted because of errors. + For character-oriented or fixed-length interfaces, the + number of outbound transmission units that could not be + transmitted because of errors. + + + + + Discontinuities in the value of this counter can occur + at re-initialization of the management system, and at + other times as indicated by the value of + 'discontinuity-time'."; + reference + "RFC 2863: The Interfaces Group MIB - ifOutErrors"; + } + } + } + } +} diff --git a/tests/modules/yang/ietf-ip@2014-06-16.yang b/tests/modules/yang/ietf-ip@2014-06-16.yang new file mode 100644 index 0000000..1499120 --- /dev/null +++ b/tests/modules/yang/ietf-ip@2014-06-16.yang @@ -0,0 +1,758 @@ +module ietf-ip { + + namespace "urn:ietf:params:xml:ns:yang:ietf-ip"; + prefix ip; + + import ietf-interfaces { + prefix if; + } + import ietf-inet-types { + prefix inet; + } + import ietf-yang-types { + prefix yang; + } + + organization + "IETF NETMOD (NETCONF Data Modeling Language) Working Group"; + + contact + "WG Web: <http://tools.ietf.org/wg/netmod/> + WG List: <mailto:netmod@ietf.org> + + WG Chair: Thomas Nadeau + <mailto:tnadeau@lucidvision.com> + + WG Chair: Juergen Schoenwaelder + <mailto:j.schoenwaelder@jacobs-university.de> + + Editor: Martin Bjorklund + <mailto:mbj@tail-f.com>"; + + + + + + + + + + + description + "This module contains a collection of YANG definitions for + configuring IP implementations. + + Copyright (c) 2014 IETF Trust and the persons identified as + authors of the code. All rights reserved. + + Redistribution and use in source and binary forms, with or + without modification, is permitted pursuant to, and subject + to the license terms contained in, the Simplified BSD License + set forth in Section 4.c of the IETF Trust's Legal Provisions + Relating to IETF Documents + (http://trustee.ietf.org/license-info). + + This version of this YANG module is part of RFC 7277; see + the RFC itself for full legal notices."; + + revision 2014-06-16 { + description + "Initial revision."; + reference + "RFC 7277: A YANG Data Model for IP Management"; + } + + /* + + * Features + */ + + feature ipv4-non-contiguous-netmasks { + description + "Indicates support for configuring non-contiguous + subnet masks."; + } + + feature ipv6-privacy-autoconf { + description + "Indicates support for Privacy Extensions for Stateless Address + Autoconfiguration in IPv6."; + reference + "RFC 4941: Privacy Extensions for Stateless Address + Autoconfiguration in IPv6"; + } + + + + + + /* + * Typedefs + */ + + typedef ip-address-origin { + type enumeration { + enum other { + description + "None of the following."; + } + enum static { + description + "Indicates that the address has been statically + configured - for example, using NETCONF or a Command Line + Interface."; + } + enum dhcp { + description + "Indicates an address that has been assigned to this + system by a DHCP server."; + } + enum link-layer { + description + "Indicates an address created by IPv6 stateless + autoconfiguration that embeds a link-layer address in its + interface identifier."; + } + enum random { + description + "Indicates an address chosen by the system at + + random, e.g., an IPv4 address within 169.254/16, an + RFC 4941 temporary address, or an RFC 7217 semantically + opaque address."; + reference + "RFC 4941: Privacy Extensions for Stateless Address + Autoconfiguration in IPv6 + RFC 7217: A Method for Generating Semantically Opaque + Interface Identifiers with IPv6 Stateless + Address Autoconfiguration (SLAAC)"; + } + } + description + "The origin of an address."; + } + + + + typedef neighbor-origin { + type enumeration { + enum other { + description + "None of the following."; + } + enum static { + description + "Indicates that the mapping has been statically + configured - for example, using NETCONF or a Command Line + Interface."; + } + enum dynamic { + description + "Indicates that the mapping has been dynamically resolved + using, e.g., IPv4 ARP or the IPv6 Neighbor Discovery + protocol."; + } + } + description + "The origin of a neighbor entry."; + } + + /* + * Configuration data nodes + */ + + augment "/if:interfaces/if:interface" { + description + "Parameters for configuring IP on interfaces. + + If an interface is not capable of running IP, the server + must not allow the client to configure these parameters."; + + container ipv4 { + presence + "Enables IPv4 unless the 'enabled' leaf + (which defaults to 'true') is set to 'false'"; + description + "Parameters for the IPv4 address family."; + + + + + + + + + leaf enabled { + type boolean; + default true; + description + "Controls whether IPv4 is enabled or disabled on this + interface. When IPv4 is enabled, this interface is + connected to an IPv4 stack, and the interface can send + and receive IPv4 packets."; + } + leaf forwarding { + type boolean; + default false; + description + "Controls IPv4 packet forwarding of datagrams received by, + but not addressed to, this interface. IPv4 routers + forward datagrams. IPv4 hosts do not (except those + source-routed via the host)."; + } + leaf mtu { + type uint16 { + range "68..max"; + } + units octets; + description + "The size, in octets, of the largest IPv4 packet that the + interface will send and receive. + + The server may restrict the allowed values for this leaf, + depending on the interface's type. + + If this leaf is not configured, the operationally used MTU + depends on the interface's type."; + reference + "RFC 791: Internet Protocol"; + } + list address { + key "ip"; + description + "The list of configured IPv4 addresses on the interface."; + + leaf ip { + type inet:ipv4-address-no-zone; + description + "The IPv4 address on the interface."; + } + + + + choice subnet { + mandatory true; + description + "The subnet can be specified as a prefix-length, or, + if the server supports non-contiguous netmasks, as + a netmask."; + leaf prefix-length { + type uint8 { + range "0..32"; + } + description + "The length of the subnet prefix."; + } + leaf netmask { + if-feature ipv4-non-contiguous-netmasks; + type yang:dotted-quad; + description + "The subnet specified as a netmask."; + } + } + } + list neighbor { + key "ip"; + description + "A list of mappings from IPv4 addresses to + link-layer addresses. + + Entries in this list are used as static entries in the + ARP Cache."; + reference + "RFC 826: An Ethernet Address Resolution Protocol"; + + leaf ip { + type inet:ipv4-address-no-zone; + description + "The IPv4 address of the neighbor node."; + } + leaf link-layer-address { + type yang:phys-address; + mandatory true; + description + "The link-layer address of the neighbor node."; + } + } + + } + + + container ipv6 { + presence + "Enables IPv6 unless the 'enabled' leaf + (which defaults to 'true') is set to 'false'"; + description + "Parameters for the IPv6 address family."; + + leaf enabled { + type boolean; + default true; + description + "Controls whether IPv6 is enabled or disabled on this + interface. When IPv6 is enabled, this interface is + connected to an IPv6 stack, and the interface can send + and receive IPv6 packets."; + } + leaf forwarding { + type boolean; + default false; + description + "Controls IPv6 packet forwarding of datagrams received by, + but not addressed to, this interface. IPv6 routers + forward datagrams. IPv6 hosts do not (except those + source-routed via the host)."; + reference + "RFC 4861: Neighbor Discovery for IP version 6 (IPv6) + Section 6.2.1, IsRouter"; + } + leaf mtu { + type uint32 { + range "1280..max"; + } + units octets; + description + "The size, in octets, of the largest IPv6 packet that the + interface will send and receive. + + The server may restrict the allowed values for this leaf, + depending on the interface's type. + + If this leaf is not configured, the operationally used MTU + depends on the interface's type."; + reference + "RFC 2460: Internet Protocol, Version 6 (IPv6) Specification + Section 5"; + } + + + list address { + key "ip"; + description + "The list of configured IPv6 addresses on the interface."; + + leaf ip { + type inet:ipv6-address-no-zone; + description + "The IPv6 address on the interface."; + } + leaf prefix-length { + type uint8 { + range "0..128"; + } + mandatory true; + description + "The length of the subnet prefix."; + } + } + list neighbor { + key "ip"; + description + "A list of mappings from IPv6 addresses to + link-layer addresses. + + Entries in this list are used as static entries in the + Neighbor Cache."; + reference + "RFC 4861: Neighbor Discovery for IP version 6 (IPv6)"; + + leaf ip { + type inet:ipv6-address-no-zone; + description + "The IPv6 address of the neighbor node."; + } + leaf link-layer-address { + type yang:phys-address; + mandatory true; + description + "The link-layer address of the neighbor node."; + } + } + + + + + + + leaf dup-addr-detect-transmits { + type uint32; + default 1; + description + "The number of consecutive Neighbor Solicitation messages + sent while performing Duplicate Address Detection on a + tentative address. A value of zero indicates that + Duplicate Address Detection is not performed on + tentative addresses. A value of one indicates a single + transmission with no follow-up retransmissions."; + reference + "RFC 4862: IPv6 Stateless Address Autoconfiguration"; + } + container autoconf { + description + "Parameters to control the autoconfiguration of IPv6 + addresses, as described in RFC 4862."; + reference + "RFC 4862: IPv6 Stateless Address Autoconfiguration"; + + leaf create-global-addresses { + type boolean; + default true; + description + "If enabled, the host creates global addresses as + described in RFC 4862."; + reference + "RFC 4862: IPv6 Stateless Address Autoconfiguration + Section 5.5"; + } + leaf create-temporary-addresses { + if-feature ipv6-privacy-autoconf; + type boolean; + default false; + description + "If enabled, the host creates temporary addresses as + described in RFC 4941."; + reference + "RFC 4941: Privacy Extensions for Stateless Address + Autoconfiguration in IPv6"; + } + + + + + + + + leaf temporary-valid-lifetime { + if-feature ipv6-privacy-autoconf; + type uint32; + units "seconds"; + default 604800; + description + "The time period during which the temporary address + is valid."; + reference + "RFC 4941: Privacy Extensions for Stateless Address + Autoconfiguration in IPv6 + - TEMP_VALID_LIFETIME"; + } + leaf temporary-preferred-lifetime { + if-feature ipv6-privacy-autoconf; + type uint32; + units "seconds"; + default 86400; + description + "The time period during which the temporary address is + preferred."; + reference + "RFC 4941: Privacy Extensions for Stateless Address + Autoconfiguration in IPv6 + - TEMP_PREFERRED_LIFETIME"; + } + } + } + } + + /* + * Operational state data nodes + */ + + augment "/if:interfaces-state/if:interface" { + description + "Data nodes for the operational state of IP on interfaces."; + + container ipv4 { + presence "Present if IPv4 is enabled on this interface"; + config false; + description + "Interface-specific parameters for the IPv4 address family."; + + + + + + leaf forwarding { + type boolean; + description + "Indicates whether IPv4 packet forwarding is enabled or + disabled on this interface."; + } + leaf mtu { + type uint16 { + range "68..max"; + } + units octets; + description + "The size, in octets, of the largest IPv4 packet that the + interface will send and receive."; + reference + "RFC 791: Internet Protocol"; + } + list address { + key "ip"; + description + "The list of IPv4 addresses on the interface."; + + leaf ip { + type inet:ipv4-address-no-zone; + description + "The IPv4 address on the interface."; + } + choice subnet { + description + "The subnet can be specified as a prefix-length, or, + if the server supports non-contiguous netmasks, as + a netmask."; + leaf prefix-length { + type uint8 { + range "0..32"; + } + description + "The length of the subnet prefix."; + } + leaf netmask { + if-feature ipv4-non-contiguous-netmasks; + type yang:dotted-quad; + description + "The subnet specified as a netmask."; + } + } + + + leaf origin { + type ip-address-origin; + description + "The origin of this address."; + } + } + list neighbor { + key "ip"; + description + "A list of mappings from IPv4 addresses to + link-layer addresses. + + This list represents the ARP Cache."; + reference + "RFC 826: An Ethernet Address Resolution Protocol"; + + leaf ip { + type inet:ipv4-address-no-zone; + description + "The IPv4 address of the neighbor node."; + } + leaf link-layer-address { + type yang:phys-address; + description + "The link-layer address of the neighbor node."; + } + leaf origin { + type neighbor-origin; + description + "The origin of this neighbor entry."; + } + } + + } + + container ipv6 { + presence "Present if IPv6 is enabled on this interface"; + config false; + description + "Parameters for the IPv6 address family."; + + + + + + + + + leaf forwarding { + type boolean; + default false; + description + "Indicates whether IPv6 packet forwarding is enabled or + disabled on this interface."; + reference + "RFC 4861: Neighbor Discovery for IP version 6 (IPv6) + Section 6.2.1, IsRouter"; + } + leaf mtu { + type uint32 { + range "1280..max"; + } + units octets; + description + "The size, in octets, of the largest IPv6 packet that the + interface will send and receive."; + reference + "RFC 2460: Internet Protocol, Version 6 (IPv6) Specification + Section 5"; + } + list address { + key "ip"; + description + "The list of IPv6 addresses on the interface."; + + leaf ip { + type inet:ipv6-address-no-zone; + description + "The IPv6 address on the interface."; + } + leaf prefix-length { + type uint8 { + range "0..128"; + } + mandatory true; + description + "The length of the subnet prefix."; + } + leaf origin { + type ip-address-origin; + description + "The origin of this address."; + } + + + + leaf status { + type enumeration { + enum preferred { + description + "This is a valid address that can appear as the + destination or source address of a packet."; + } + enum deprecated { + description + "This is a valid but deprecated address that should + no longer be used as a source address in new + communications, but packets addressed to such an + address are processed as expected."; + } + enum invalid { + description + "This isn't a valid address, and it shouldn't appear + as the destination or source address of a packet."; + } + enum inaccessible { + description + "The address is not accessible because the interface + to which this address is assigned is not + operational."; + } + enum unknown { + description + "The status cannot be determined for some reason."; + } + enum tentative { + description + "The uniqueness of the address on the link is being + verified. Addresses in this state should not be + used for general communication and should only be + used to determine the uniqueness of the address."; + } + enum duplicate { + description + "The address has been determined to be non-unique on + the link and so must not be used."; + } + + + + + + + + enum optimistic { + description + "The address is available for use, subject to + restrictions, while its uniqueness on a link is + being verified."; + } + } + description + "The status of an address. Most of the states correspond + to states from the IPv6 Stateless Address + Autoconfiguration protocol."; + reference + "RFC 4293: Management Information Base for the + Internet Protocol (IP) + - IpAddressStatusTC + RFC 4862: IPv6 Stateless Address Autoconfiguration"; + } + } + list neighbor { + key "ip"; + description + "A list of mappings from IPv6 addresses to + link-layer addresses. + + This list represents the Neighbor Cache."; + reference + "RFC 4861: Neighbor Discovery for IP version 6 (IPv6)"; + + leaf ip { + type inet:ipv6-address-no-zone; + description + "The IPv6 address of the neighbor node."; + } + leaf link-layer-address { + type yang:phys-address; + description + "The link-layer address of the neighbor node."; + } + leaf origin { + type neighbor-origin; + description + "The origin of this neighbor entry."; + } + leaf is-router { + type empty; + description + "Indicates that the neighbor node acts as a router."; + } + leaf state { + type enumeration { + enum incomplete { + description + "Address resolution is in progress, and the link-layer + address of the neighbor has not yet been + determined."; + } + enum reachable { + description + "Roughly speaking, the neighbor is known to have been + reachable recently (within tens of seconds ago)."; + } + enum stale { + description + "The neighbor is no longer known to be reachable, but + until traffic is sent to the neighbor no attempt + should be made to verify its reachability."; + } + enum delay { + description + "The neighbor is no longer known to be reachable, and + traffic has recently been sent to the neighbor. + Rather than probe the neighbor immediately, however, + delay sending probes for a short while in order to + give upper-layer protocols a chance to provide + reachability confirmation."; + } + enum probe { + description + "The neighbor is no longer known to be reachable, and + unicast Neighbor Solicitation probes are being sent + to verify reachability."; + } + } + description + "The Neighbor Unreachability Detection state of this + entry."; + reference + "RFC 4861: Neighbor Discovery for IP version 6 (IPv6) + Section 7.3.2"; + } + } + } + } +} diff --git a/tests/modules/yang/ietf-netconf-acm@2018-02-14.yang b/tests/modules/yang/ietf-netconf-acm@2018-02-14.yang new file mode 100644 index 0000000..bf4855f --- /dev/null +++ b/tests/modules/yang/ietf-netconf-acm@2018-02-14.yang @@ -0,0 +1,464 @@ +module ietf-netconf-acm { + + namespace "urn:ietf:params:xml:ns:yang:ietf-netconf-acm"; + + prefix nacm; + + import ietf-yang-types { + prefix yang; + } + + organization + "IETF NETCONF (Network Configuration) Working Group"; + + contact + "WG Web: <https://datatracker.ietf.org/wg/netconf/> + WG List: <mailto:netconf@ietf.org> + + Author: Andy Bierman + <mailto:andy@yumaworks.com> + + Author: Martin Bjorklund + <mailto:mbj@tail-f.com>"; + + description + "Network Configuration Access Control Model. + + Copyright (c) 2012 - 2018 IETF Trust and the persons + identified as authors of the code. All rights reserved. + + Redistribution and use in source and binary forms, with or + without modification, is permitted pursuant to, and subject + to the license terms contained in, the Simplified BSD + License set forth in Section 4.c of the IETF Trust's + Legal Provisions Relating to IETF Documents + (https://trustee.ietf.org/license-info). + + This version of this YANG module is part of RFC 8341; see + the RFC itself for full legal notices."; + + revision "2018-02-14" { + description + "Added support for YANG 1.1 actions and notifications tied to + data nodes. Clarified how NACM extensions can be used by + other data models."; + reference + "RFC 8341: Network Configuration Access Control Model"; + } + + revision "2012-02-22" { + description + "Initial version."; + reference + "RFC 6536: Network Configuration Protocol (NETCONF) + Access Control Model"; + } + + /* + * Extension statements + */ + + extension default-deny-write { + description + "Used to indicate that the data model node + represents a sensitive security system parameter. + + If present, the NETCONF server will only allow the designated + 'recovery session' to have write access to the node. An + explicit access control rule is required for all other users. + + If the NACM module is used, then it must be enabled (i.e., + /nacm/enable-nacm object equals 'true'), or this extension + is ignored. + + The 'default-deny-write' extension MAY appear within a data + definition statement. It is ignored otherwise."; + } + + extension default-deny-all { + description + "Used to indicate that the data model node + controls a very sensitive security system parameter. + + If present, the NETCONF server will only allow the designated + 'recovery session' to have read, write, or execute access to + the node. An explicit access control rule is required for all + other users. + + If the NACM module is used, then it must be enabled (i.e., + /nacm/enable-nacm object equals 'true'), or this extension + is ignored. + + The 'default-deny-all' extension MAY appear within a data + definition statement, 'rpc' statement, or 'notification' + statement. It is ignored otherwise."; + } + + /* + * Derived types + */ + + typedef user-name-type { + type string { + length "1..max"; + } + description + "General-purpose username string."; + } + + typedef matchall-string-type { + type string { + pattern '\*'; + } + description + "The string containing a single asterisk '*' is used + to conceptually represent all possible values + for the particular leaf using this data type."; + } + + typedef access-operations-type { + type bits { + bit create { + description + "Any protocol operation that creates a + new data node."; + } + bit read { + description + "Any protocol operation or notification that + returns the value of a data node."; + } + bit update { + description + "Any protocol operation that alters an existing + data node."; + } + bit delete { + description + "Any protocol operation that removes a data node."; + } + bit exec { + description + "Execution access to the specified protocol operation."; + } + } + description + "Access operation."; + } + + typedef group-name-type { + type string { + length "1..max"; + pattern '[^\*].*'; + } + description + "Name of administrative group to which + users can be assigned."; + } + + typedef action-type { + type enumeration { + enum permit { + description + "Requested action is permitted."; + } + enum deny { + description + "Requested action is denied."; + } + } + description + "Action taken by the server when a particular + rule matches."; + } + + typedef node-instance-identifier { + type yang:xpath1.0; + description + "Path expression used to represent a special + data node, action, or notification instance-identifier + string. + + A node-instance-identifier value is an + unrestricted YANG instance-identifier expression. + All the same rules as an instance-identifier apply, + except that predicates for keys are optional. If a key + predicate is missing, then the node-instance-identifier + represents all possible server instances for that key. + + This XML Path Language (XPath) expression is evaluated in the + following context: + + o The set of namespace declarations are those in scope on + the leaf element where this type is used. + + o The set of variable bindings contains one variable, + 'USER', which contains the name of the user of the + current session. + + o The function library is the core function library, but + note that due to the syntax restrictions of an + instance-identifier, no functions are allowed. + + o The context node is the root node in the data tree. + + The accessible tree includes actions and notifications tied + to data nodes."; + } + + /* + * Data definition statements + */ + + container nacm { + nacm:default-deny-all; + + description + "Parameters for NETCONF access control model."; + + leaf enable-nacm { + type boolean; + default "true"; + description + "Enables or disables all NETCONF access control + enforcement. If 'true', then enforcement + is enabled. If 'false', then enforcement + is disabled."; + } + + leaf read-default { + type action-type; + default "permit"; + description + "Controls whether read access is granted if + no appropriate rule is found for a + particular read request."; + } + + leaf write-default { + type action-type; + default "deny"; + description + "Controls whether create, update, or delete access + is granted if no appropriate rule is found for a + particular write request."; + } + + leaf exec-default { + type action-type; + default "permit"; + description + "Controls whether exec access is granted if no appropriate + rule is found for a particular protocol operation request."; + } + + leaf enable-external-groups { + type boolean; + default "true"; + description + "Controls whether the server uses the groups reported by the + NETCONF transport layer when it assigns the user to a set of + NACM groups. If this leaf has the value 'false', any group + names reported by the transport layer are ignored by the + server."; + } + + leaf denied-operations { + type yang:zero-based-counter32; + config false; + mandatory true; + description + "Number of times since the server last restarted that a + protocol operation request was denied."; + } + + leaf denied-data-writes { + type yang:zero-based-counter32; + config false; + mandatory true; + description + "Number of times since the server last restarted that a + protocol operation request to alter + a configuration datastore was denied."; + } + + leaf denied-notifications { + type yang:zero-based-counter32; + config false; + mandatory true; + description + "Number of times since the server last restarted that + a notification was dropped for a subscription because + access to the event type was denied."; + } + + container groups { + description + "NETCONF access control groups."; + + list group { + key name; + + description + "One NACM group entry. This list will only contain + configured entries, not any entries learned from + any transport protocols."; + + leaf name { + type group-name-type; + description + "Group name associated with this entry."; + } + + leaf-list user-name { + type user-name-type; + description + "Each entry identifies the username of + a member of the group associated with + this entry."; + } + } + } + + list rule-list { + key name; + ordered-by user; + description + "An ordered collection of access control rules."; + + leaf name { + type string { + length "1..max"; + } + description + "Arbitrary name assigned to the rule-list."; + } + leaf-list group { + type union { + type matchall-string-type; + type group-name-type; + } + description + "List of administrative groups that will be + assigned the associated access rights + defined by the 'rule' list. + + The string '*' indicates that all groups apply to the + entry."; + } + + list rule { + key name; + ordered-by user; + description + "One access control rule. + + Rules are processed in user-defined order until a match is + found. A rule matches if 'module-name', 'rule-type', and + 'access-operations' match the request. If a rule + matches, the 'action' leaf determines whether or not + access is granted."; + + leaf name { + type string { + length "1..max"; + } + description + "Arbitrary name assigned to the rule."; + } + + leaf module-name { + type union { + type matchall-string-type; + type string; + } + default "*"; + description + "Name of the module associated with this rule. + + This leaf matches if it has the value '*' or if the + object being accessed is defined in the module with the + specified module name."; + } + choice rule-type { + description + "This choice matches if all leafs present in the rule + match the request. If no leafs are present, the + choice matches all requests."; + case protocol-operation { + leaf rpc-name { + type union { + type matchall-string-type; + type string; + } + description + "This leaf matches if it has the value '*' or if + its value equals the requested protocol operation + name."; + } + } + case notification { + leaf notification-name { + type union { + type matchall-string-type; + type string; + } + description + "This leaf matches if it has the value '*' or if its + value equals the requested notification name."; + } + } + + case data-node { + leaf path { + type node-instance-identifier; + mandatory true; + description + "Data node instance-identifier associated with the + data node, action, or notification controlled by + this rule. + + Configuration data or state data + instance-identifiers start with a top-level + data node. A complete instance-identifier is + required for this type of path value. + + The special value '/' refers to all possible + datastore contents."; + } + } + } + + leaf access-operations { + type union { + type matchall-string-type; + type access-operations-type; + } + default "*"; + description + "Access operations associated with this rule. + + This leaf matches if it has the value '*' or if the + bit corresponding to the requested operation is set."; + } + + leaf action { + type action-type; + mandatory true; + description + "The access control action associated with the + rule. If a rule has been determined to match a + particular request, then this object is used + to determine whether to permit or deny the + request."; + } + + leaf comment { + type string; + description + "A textual description of the access rule."; + } + } + } + } +} diff --git a/tests/modules/yang/ietf-netconf-nmda@2019-01-07.yang b/tests/modules/yang/ietf-netconf-nmda@2019-01-07.yang new file mode 100644 index 0000000..31dce50 --- /dev/null +++ b/tests/modules/yang/ietf-netconf-nmda@2019-01-07.yang @@ -0,0 +1,385 @@ + module ietf-netconf-nmda { + yang-version 1.1; + namespace "urn:ietf:params:xml:ns:yang:ietf-netconf-nmda"; + prefix ncds; + + import ietf-yang-types { + prefix yang; + reference + "RFC 6991: Common YANG Data Types"; + } + import ietf-inet-types { + prefix inet; + reference + "RFC 6991: Common YANG Data Types"; + } + import ietf-datastores { + prefix ds; + reference + "RFC 8342: Network Management Datastore Architecture + (NMDA)"; + } + import ietf-origin { + prefix or; + reference + "RFC 8342: Network Management Datastore Architecture + (NMDA)"; + } + import ietf-netconf { + prefix nc; + reference + "RFC 6241: Network Configuration Protocol (NETCONF)"; + } + import ietf-netconf-with-defaults { + prefix ncwd; + reference + "RFC 6243: With-defaults Capability for NETCONF"; + } + + organization + "IETF NETCONF Working Group"; + + contact + "WG Web: <https://datatracker.ietf.org/wg/netconf/> + + WG List: <mailto:netconf@ietf.org> + + Author: Martin Bjorklund + <mailto:mbj@tail-f.com> + + Author: Juergen Schoenwaelder + <mailto:j.schoenwaelder@jacobs-university.de> + + Author: Phil Shafer + <mailto:phil@juniper.net> + + Author: Kent Watsen + <mailto:kent+ietf@watsen.net> + + Author: Robert Wilton + <mailto:rwilton@cisco.com>"; + description + "This YANG module defines a set of NETCONF operations to support + the Network Management Datastore Architecture (NMDA). + + The key words 'MUST', 'MUST NOT', 'REQUIRED', 'SHALL', 'SHALL + NOT', 'SHOULD', 'SHOULD NOT', 'RECOMMENDED', 'NOT RECOMMENDED', + 'MAY', and 'OPTIONAL' in this document are to be interpreted as + described in BCP 14 (RFC 2119) (RFC 8174) when, and only when, + they appear in all capitals, as shown here. + + Copyright (c) 2019 IETF Trust and the persons identified as + authors of the code. All rights reserved. + + Redistribution and use in source and binary forms, with or + without modification, is permitted pursuant to, and subject to + the license terms contained in, the Simplified BSD License set + forth in Section 4.c of the IETF Trust's Legal Provisions + Relating to IETF Documents + (https://trustee.ietf.org/license-info). + + This version of this YANG module is part of RFC 8526; see + the RFC itself for full legal notices."; + + revision 2019-01-07 { + description + "Initial revision."; + reference + "RFC 8526: NETCONF Extensions to Support the Network Management + Datastore Architecture"; + } + + feature origin { + description + "Indicates that the server supports the 'origin' annotation."; + reference + "RFC 8342: Network Management Datastore Architecture (NMDA)"; + } + + feature with-defaults { + description + "NETCONF :with-defaults capability. If the server advertises + the :with-defaults capability for a session, then this + feature must also be enabled for that session. Otherwise, + this feature must not be enabled."; + reference + "RFC 6243: With-defaults Capability for NETCONF, Section 4; and + RFC 8526: NETCONF Extensions to Support the Network Management + Datastore Architecture, Section 3.1.1.2"; + } + + rpc get-data { + description + "Retrieve data from an NMDA datastore. The content returned + by get-data must satisfy all filters, i.e., the filter + criteria are logically ANDed. + + Any ancestor nodes (including list keys) of nodes selected by + the filters are included in the response. + + The 'with-origin' parameter is only valid for an operational + datastore. If 'with-origin' is used with an invalid + datastore, then the server MUST return an <rpc-error> element + with an <error-tag> value of 'invalid-value'. + + The 'with-defaults' parameter only applies to the operational + datastore if the NETCONF :with-defaults and + :with-operational-defaults capabilities are both advertised. + If the 'with-defaults' parameter is present in a request for + which it is not supported, then the server MUST return an + <rpc-error> element with an <error-tag> value of + 'invalid-value'."; + input { + leaf datastore { + type ds:datastore-ref; + mandatory true; + description + "Datastore from which to retrieve data. + + If the datastore is not supported by the server, then the + server MUST return an <rpc-error> element with an + <error-tag> value of 'invalid-value'."; + } + choice filter-spec { + description + "The content filter specification for this request."; + anydata subtree-filter { + description + "This parameter identifies the portions of the + target datastore to retrieve."; + reference + "RFC 6241: Network Configuration Protocol (NETCONF), + Section 6"; + } + leaf xpath-filter { + if-feature "nc:xpath"; + type yang:xpath1.0; + description + "This parameter contains an XPath expression identifying + the portions of the target datastore to retrieve. + + If the expression returns a node-set, all nodes in the + node-set are selected by the filter. Otherwise, if the + expression does not return a node-set, then the + <get-data> operation fails. + + The expression is evaluated in the following XPath + context: + + o The set of namespace declarations are those in + scope on the 'xpath-filter' leaf element. + + o The set of variable bindings is empty. + + o The function library is the core function library, + and the XPath functions are defined in Section 10 + of RFC 7950. + + o The context node is the root node of the target + datastore."; + } + } + leaf config-filter { + type boolean; + description + "Filter for nodes with the given value for their 'config' + property. When this leaf is set to 'true', only 'config + true' nodes are selected, and when set to 'false', only + 'config false' nodes are selected. If this leaf is not + present, no nodes are filtered."; + } + choice origin-filters { + when 'derived-from-or-self(datastore, "ds:operational")'; + if-feature "origin"; + description + "Filters configuration nodes based on the 'origin' + annotation. Configuration nodes that do not have an + 'origin' annotation are treated as if they have the + 'origin' annotation 'or:unknown'. + + System state nodes are not affected by origin-filters and + thus not filtered. Note that system state nodes can be + filtered with the 'config-filter' leaf."; + + leaf-list origin-filter { + type or:origin-ref; + description + "Filter based on the 'origin' annotation. A + configuration node matches the filter if its 'origin' + annotation is derived from or equal to any of the given + filter values."; + } + leaf-list negated-origin-filter { + type or:origin-ref; + description + "Filter based on the 'origin' annotation. A + configuration node matches the filter if its 'origin' + annotation is neither derived from nor equal to any of + the given filter values."; + } + } + leaf max-depth { + type union { + type uint16 { + range "1..65535"; + } + type enumeration { + enum unbounded { + description + "All descendant nodes are included."; + } + } + } + default "unbounded"; + description + "For each node selected by the filters, this parameter + selects how many conceptual subtree levels should be + returned in the reply. If the depth is 1, the reply + includes just the selected nodes but no children. If the + depth is 'unbounded', all descendant nodes are included."; + } + leaf with-origin { + when 'derived-from-or-self(../datastore, "ds:operational")'; + if-feature "origin"; + type empty; + description + "If this parameter is present, the server will return + the 'origin' annotation for the nodes that have one."; + } + uses ncwd:with-defaults-parameters { + if-feature "with-defaults"; + } + } + output { + anydata data { + description + "Copy of the source datastore subset that matched + the filter criteria (if any). An empty data + container indicates that the request did not + produce any results."; + } + } + } + + rpc edit-data { + description + "Edit data in an NMDA datastore. + + If an error condition occurs such that an error severity + <rpc-error> element is generated, the server will stop + processing the <edit-data> operation and restore the + specified configuration to its complete state at + the start of this <edit-data> operation."; + input { + leaf datastore { + type ds:datastore-ref; + mandatory true; + description + "Datastore that is the target of the <edit-data> operation. + + If the target datastore is not writable, or is not + supported by the server, then the server MUST return an + <rpc-error> element with an <error-tag> value of + 'invalid-value'."; + } + leaf default-operation { + type enumeration { + enum merge { + description + "The default operation is merge."; + } + enum replace { + description + "The default operation is replace."; + } + enum none { + description + "There is no default operation."; + } + } + default "merge"; + description + "The default operation to use."; + } + choice edit-content { + mandatory true; + description + "The content for the edit operation."; + anydata config { + description + "Inline config content."; + } + leaf url { + if-feature "nc:url"; + type inet:uri; + description + "URL-based config content."; + } + } + } + } + + /* + * Augment the <lock> and <unlock> operations with a + * "datastore" parameter. + */ + + augment "/nc:lock/nc:input/nc:target/nc:config-target" { + description + "Add NMDA datastore as target."; + leaf datastore { + type ds:datastore-ref; + description + "Datastore to lock. + + The <lock> operation is only supported on writable + datastores. + + If the <lock> operation is not supported by the server on + the specified target datastore, then the server MUST return + an <rpc-error> element with an <error-tag> value of + 'invalid-value'."; + } + } + + augment "/nc:unlock/nc:input/nc:target/nc:config-target" { + description + "Add NMDA datastore as target."; + leaf datastore { + type ds:datastore-ref; + description + "Datastore to unlock. + + The <unlock> operation is only supported on writable + datastores. + + If the <unlock> operation is not supported by the server on + the specified target datastore, then the server MUST return + an <rpc-error> element with an <error-tag> value of + 'invalid-value'."; + } + } + + /* + * Augment the <validate> operation with a + * "datastore" parameter. + */ + + augment "/nc:validate/nc:input/nc:source/nc:config-source" { + description + "Add NMDA datastore as source."; + leaf datastore { + type ds:datastore-ref; + description + "Datastore to validate. + + The <validate> operation is supported only on configuration + datastores. + + If the <validate> operation is not supported by the server + on the specified target datastore, then the server MUST + return an <rpc-error> element with an <error-tag> value of + 'invalid-value'."; + } + } + } diff --git a/tests/modules/yang/ietf-netconf-with-defaults@2011-06-01.yang b/tests/modules/yang/ietf-netconf-with-defaults@2011-06-01.yang new file mode 100644 index 0000000..e19d2b3 --- /dev/null +++ b/tests/modules/yang/ietf-netconf-with-defaults@2011-06-01.yang @@ -0,0 +1,140 @@ +module ietf-netconf-with-defaults { + + namespace "urn:ietf:params:xml:ns:yang:ietf-netconf-with-defaults"; + + prefix ncwd; + + import ietf-netconf { prefix nc; } + + organization + "IETF NETCONF (Network Configuration Protocol) Working Group"; + + contact + "WG Web: <http://tools.ietf.org/wg/netconf/> + + WG List: <netconf@ietf.org> + + WG Chair: Bert Wijnen + <bertietf@bwijnen.net> + + WG Chair: Mehmet Ersue + <mehmet.ersue@nsn.com> + + Editor: Andy Bierman + <andy.bierman@brocade.com> + + Editor: Balazs Lengyel + <balazs.lengyel@ericsson.com>"; + + description + "This module defines an extension to the NETCONF protocol + that allows the NETCONF client to control how default + values are handled by the server in particular NETCONF + operations. + + Copyright (c) 2011 IETF Trust and the persons identified as + the document authors. All rights reserved. + + Redistribution and use in source and binary forms, with or + without modification, is permitted pursuant to, and subject + to the license terms contained in, the Simplified BSD License + set forth in Section 4.c of the IETF Trust's Legal Provisions + Relating to IETF Documents + (http://trustee.ietf.org/license-info). + + This version of this YANG module is part of RFC 6243; see + the RFC itself for full legal notices."; + + revision 2011-06-01 { + description + "Initial version."; + reference + "RFC 6243: With-defaults Capability for NETCONF"; + } + + typedef with-defaults-mode { + description + "Possible modes to report default data."; + reference + "RFC 6243; Section 3."; + type enumeration { + enum report-all { + description + "All default data is reported."; + reference + "RFC 6243; Section 3.1"; + } + enum report-all-tagged { + description + "All default data is reported. + Any nodes considered to be default data + will contain a 'default' XML attribute, + set to 'true' or '1'."; + reference + "RFC 6243; Section 3.4"; + } + enum trim { + description + "Values are not reported if they contain the default."; + reference + "RFC 6243; Section 3.2"; + } + enum explicit { + description + "Report values that contain the definition of + explicitly set data."; + reference + "RFC 6243; Section 3.3"; + } + } + } + + grouping with-defaults-parameters { + description + "Contains the <with-defaults> parameter for control + of defaults in NETCONF retrieval operations."; + + leaf with-defaults { + description + "The explicit defaults processing mode requested."; + reference + "RFC 6243; Section 4.5.1"; + + type with-defaults-mode; + } + } + + // extending the get-config operation + augment /nc:get-config/nc:input { + description + "Adds the <with-defaults> parameter to the + input of the NETCONF <get-config> operation."; + reference + "RFC 6243; Section 4.5.1"; + + uses with-defaults-parameters; + } + + // extending the get operation + augment /nc:get/nc:input { + description + "Adds the <with-defaults> parameter to + the input of the NETCONF <get> operation."; + reference + "RFC 6243; Section 4.5.1"; + + uses with-defaults-parameters; + } + + // extending the copy-config operation + augment /nc:copy-config/nc:input { + description + "Adds the <with-defaults> parameter to + the input of the NETCONF <copy-config> operation."; + reference + "RFC 6243; Section 4.5.1"; + + uses with-defaults-parameters; + } + +} diff --git a/tests/modules/yang/ietf-netconf@2011-06-01.yang b/tests/modules/yang/ietf-netconf@2011-06-01.yang new file mode 100644 index 0000000..6449421 --- /dev/null +++ b/tests/modules/yang/ietf-netconf@2011-06-01.yang @@ -0,0 +1,934 @@ +module ietf-netconf { + + // the namespace for NETCONF XML definitions is unchanged + // from RFC 4741, which this document replaces + namespace "urn:ietf:params:xml:ns:netconf:base:1.0"; + + prefix nc; + + import ietf-inet-types { + prefix inet; + } + + import ietf-netconf-acm { prefix nacm; } + + organization + "IETF NETCONF (Network Configuration) Working Group"; + + contact + "WG Web: <http://tools.ietf.org/wg/netconf/> + WG List: <netconf@ietf.org> + + WG Chair: Bert Wijnen + <bertietf@bwijnen.net> + + WG Chair: Mehmet Ersue + <mehmet.ersue@nsn.com> + + Editor: Martin Bjorklund + <mbj@tail-f.com> + + Editor: Juergen Schoenwaelder + <j.schoenwaelder@jacobs-university.de> + + Editor: Andy Bierman + <andy.bierman@brocade.com>"; + description + "NETCONF Protocol Data Types and Protocol Operations. + + Copyright (c) 2011 IETF Trust and the persons identified as + the document authors. All rights reserved. + + Redistribution and use in source and binary forms, with or + without modification, is permitted pursuant to, and subject + to the license terms contained in, the Simplified BSD License + set forth in Section 4.c of the IETF Trust's Legal Provisions + Relating to IETF Documents + (http://trustee.ietf.org/license-info). + + This version of this YANG module is part of RFC 6241; see + the RFC itself for full legal notices."; + + revision 2011-06-01 { + description + "Initial revision; + 2013-09-29: Updated to include NACM attributes, + as specified in RFC 6536: sec 3.2.5 and 3.2.8"; + reference + "RFC 6241: Network Configuration Protocol"; + } + + extension get-filter-element-attributes { + description + "If this extension is present within an 'anyxml' + statement named 'filter', which must be conceptually + defined within the RPC input section for the <get> + and <get-config> protocol operations, then the + following unqualified XML attribute is supported + within the <filter> element, within a <get> or + <get-config> protocol operation: + + type : optional attribute with allowed + value strings 'subtree' and 'xpath'. + If missing, the default value is 'subtree'. + + If the 'xpath' feature is supported, then the + following unqualified XML attribute is + also supported: + + select: optional attribute containing a + string representing an XPath expression. + The 'type' attribute must be equal to 'xpath' + if this attribute is present."; + } + + // NETCONF capabilities defined as features + feature writable-running { + description + "NETCONF :writable-running capability; + If the server advertises the :writable-running + capability for a session, then this feature must + also be enabled for that session. Otherwise, + this feature must not be enabled."; + reference "RFC 6241, Section 8.2"; + } + + feature candidate { + description + "NETCONF :candidate capability; + If the server advertises the :candidate + capability for a session, then this feature must + also be enabled for that session. Otherwise, + this feature must not be enabled."; + reference "RFC 6241, Section 8.3"; + } + + feature confirmed-commit { + if-feature candidate; + description + "NETCONF :confirmed-commit:1.1 capability; + If the server advertises the :confirmed-commit:1.1 + capability for a session, then this feature must + also be enabled for that session. Otherwise, + this feature must not be enabled."; + + reference "RFC 6241, Section 8.4"; + } + + feature rollback-on-error { + description + "NETCONF :rollback-on-error capability; + If the server advertises the :rollback-on-error + capability for a session, then this feature must + also be enabled for that session. Otherwise, + this feature must not be enabled."; + reference "RFC 6241, Section 8.5"; + } + + feature validate { + description + "NETCONF :validate:1.1 capability; + If the server advertises the :validate:1.1 + capability for a session, then this feature must + also be enabled for that session. Otherwise, + this feature must not be enabled."; + reference "RFC 6241, Section 8.6"; + } + + feature startup { + description + "NETCONF :startup capability; + If the server advertises the :startup + capability for a session, then this feature must + also be enabled for that session. Otherwise, + this feature must not be enabled."; + reference "RFC 6241, Section 8.7"; + } + + feature url { + description + "NETCONF :url capability; + If the server advertises the :url + capability for a session, then this feature must + also be enabled for that session. Otherwise, + this feature must not be enabled."; + reference "RFC 6241, Section 8.8"; + } + + feature xpath { + description + "NETCONF :xpath capability; + If the server advertises the :xpath + capability for a session, then this feature must + also be enabled for that session. Otherwise, + this feature must not be enabled."; + reference "RFC 6241, Section 8.9"; + } + + // NETCONF Simple Types + + typedef session-id-type { + type uint32 { + range "1..max"; + } + description + "NETCONF Session Id"; + } + + typedef session-id-or-zero-type { + type uint32; + description + "NETCONF Session Id or Zero to indicate none"; + } + typedef error-tag-type { + type enumeration { + enum in-use { + description + "The request requires a resource that + already is in use."; + } + enum invalid-value { + description + "The request specifies an unacceptable value for one + or more parameters."; + } + enum too-big { + description + "The request or response (that would be generated) is + too large for the implementation to handle."; + } + enum missing-attribute { + description + "An expected attribute is missing."; + } + enum bad-attribute { + description + "An attribute value is not correct; e.g., wrong type, + out of range, pattern mismatch."; + } + enum unknown-attribute { + description + "An unexpected attribute is present."; + } + enum missing-element { + description + "An expected element is missing."; + } + enum bad-element { + description + "An element value is not correct; e.g., wrong type, + out of range, pattern mismatch."; + } + enum unknown-element { + description + "An unexpected element is present."; + } + enum unknown-namespace { + description + "An unexpected namespace is present."; + } + enum access-denied { + description + "Access to the requested protocol operation or + data model is denied because authorization failed."; + } + enum lock-denied { + description + "Access to the requested lock is denied because the + lock is currently held by another entity."; + } + enum resource-denied { + description + "Request could not be completed because of + insufficient resources."; + } + enum rollback-failed { + description + "Request to roll back some configuration change (via + rollback-on-error or <discard-changes> operations) + was not completed for some reason."; + + } + enum data-exists { + description + "Request could not be completed because the relevant + data model content already exists. For example, + a 'create' operation was attempted on data that + already exists."; + } + enum data-missing { + description + "Request could not be completed because the relevant + data model content does not exist. For example, + a 'delete' operation was attempted on + data that does not exist."; + } + enum operation-not-supported { + description + "Request could not be completed because the requested + operation is not supported by this implementation."; + } + enum operation-failed { + description + "Request could not be completed because the requested + operation failed for some reason not covered by + any other error condition."; + } + enum partial-operation { + description + "This error-tag is obsolete, and SHOULD NOT be sent + by servers conforming to this document."; + } + enum malformed-message { + description + "A message could not be handled because it failed to + be parsed correctly. For example, the message is not + well-formed XML or it uses an invalid character set."; + } + } + description "NETCONF Error Tag"; + reference "RFC 6241, Appendix A"; + } + + typedef error-severity-type { + type enumeration { + enum error { + description "Error severity"; + } + enum warning { + description "Warning severity"; + } + } + description "NETCONF Error Severity"; + reference "RFC 6241, Section 4.3"; + } + + typedef edit-operation-type { + type enumeration { + enum merge { + description + "The configuration data identified by the + element containing this attribute is merged + with the configuration at the corresponding + level in the configuration datastore identified + by the target parameter."; + } + enum replace { + description + "The configuration data identified by the element + containing this attribute replaces any related + configuration in the configuration datastore + identified by the target parameter. If no such + configuration data exists in the configuration + datastore, it is created. Unlike a + <copy-config> operation, which replaces the + entire target configuration, only the configuration + actually present in the config parameter is affected."; + } + enum create { + description + "The configuration data identified by the element + containing this attribute is added to the + configuration if and only if the configuration + data does not already exist in the configuration + datastore. If the configuration data exists, an + <rpc-error> element is returned with an + <error-tag> value of 'data-exists'."; + } + enum delete { + description + "The configuration data identified by the element + containing this attribute is deleted from the + configuration if and only if the configuration + data currently exists in the configuration + datastore. If the configuration data does not + exist, an <rpc-error> element is returned with + an <error-tag> value of 'data-missing'."; + } + enum remove { + description + "The configuration data identified by the element + containing this attribute is deleted from the + configuration if the configuration + data currently exists in the configuration + datastore. If the configuration data does not + exist, the 'remove' operation is silently ignored + by the server."; + } + } + default "merge"; + description "NETCONF 'operation' attribute values"; + reference "RFC 6241, Section 7.2"; + } + + // NETCONF Standard Protocol Operations + + rpc get-config { + description + "Retrieve all or part of a specified configuration."; + + reference "RFC 6241, Section 7.1"; + + input { + container source { + description + "Particular configuration to retrieve."; + + choice config-source { + mandatory true; + description + "The configuration to retrieve."; + leaf candidate { + if-feature candidate; + type empty; + description + "The candidate configuration is the config source."; + } + leaf running { + type empty; + description + "The running configuration is the config source."; + } + leaf startup { + if-feature startup; + type empty; + description + "The startup configuration is the config source. + This is optional-to-implement on the server because + not all servers will support filtering for this + datastore."; + } + } + } + + anyxml filter { + description + "Subtree or XPath filter to use."; + nc:get-filter-element-attributes; + } + } + + output { + anyxml data { + description + "Copy of the source datastore subset that matched + the filter criteria (if any). An empty data container + indicates that the request did not produce any results."; + } + } + } + + rpc edit-config { + description + "The <edit-config> operation loads all or part of a specified + configuration to the specified target configuration."; + + reference "RFC 6241, Section 7.2"; + + input { + container target { + description + "Particular configuration to edit."; + + choice config-target { + mandatory true; + description + "The configuration target."; + + leaf candidate { + if-feature candidate; + type empty; + description + "The candidate configuration is the config target."; + } + leaf running { + if-feature writable-running; + type empty; + description + "The running configuration is the config source."; + } + } + } + + leaf default-operation { + type enumeration { + enum merge { + description + "The default operation is merge."; + } + enum replace { + description + "The default operation is replace."; + } + enum none { + description + "There is no default operation."; + } + } + default "merge"; + description + "The default operation to use."; + } + + leaf test-option { + if-feature validate; + type enumeration { + enum test-then-set { + description + "The server will test and then set if no errors."; + } + enum set { + description + "The server will set without a test first."; + } + + enum test-only { + description + "The server will only test and not set, even + if there are no errors."; + } + } + default "test-then-set"; + description + "The test option to use."; + } + + leaf error-option { + type enumeration { + enum stop-on-error { + description + "The server will stop on errors."; + } + enum continue-on-error { + description + "The server may continue on errors."; + } + enum rollback-on-error { + description + "The server will roll back on errors. + This value can only be used if the 'rollback-on-error' + feature is supported."; + } + } + default "stop-on-error"; + description + "The error option to use."; + } + + choice edit-content { + mandatory true; + description + "The content for the edit operation."; + + anyxml config { + description + "Inline Config content."; + } + leaf url { + if-feature url; + type inet:uri; + description + "URL-based config content."; + } + } + } + } + + rpc copy-config { + description + "Create or replace an entire configuration datastore with the + contents of another complete configuration datastore."; + + reference "RFC 6241, Section 7.3"; + + input { + container target { + description + "Particular configuration to copy to."; + + choice config-target { + mandatory true; + description + "The configuration target of the copy operation."; + + leaf candidate { + if-feature candidate; + type empty; + description + "The candidate configuration is the config target."; + } + leaf running { + if-feature writable-running; + type empty; + description + "The running configuration is the config target. + This is optional-to-implement on the server."; + } + leaf startup { + if-feature startup; + type empty; + description + "The startup configuration is the config target."; + } + leaf url { + if-feature url; + type inet:uri; + description + "The URL-based configuration is the config target."; + } + } + } + + container source { + description + "Particular configuration to copy from."; + + choice config-source { + mandatory true; + description + "The configuration source for the copy operation."; + + leaf candidate { + if-feature candidate; + type empty; + description + "The candidate configuration is the config source."; + } + leaf running { + type empty; + description + "The running configuration is the config source."; + } + leaf startup { + if-feature startup; + type empty; + description + "The startup configuration is the config source."; + } + leaf url { + if-feature url; + type inet:uri; + description + "The URL-based configuration is the config source."; + } + anyxml config { + description + "Inline Config content: <config> element. Represents + an entire configuration datastore, not + a subset of the running datastore."; + } + } + } + } + } + + rpc delete-config { + nacm:default-deny-all; + description + "Delete a configuration datastore."; + + reference "RFC 6241, Section 7.4"; + + input { + container target { + description + "Particular configuration to delete."; + + choice config-target { + mandatory true; + description + "The configuration target to delete."; + + leaf startup { + if-feature startup; + type empty; + description + "The startup configuration is the config target."; + } + leaf url { + if-feature url; + type inet:uri; + description + "The URL-based configuration is the config target."; + } + } + } + } + } + + rpc lock { + description + "The lock operation allows the client to lock the configuration + system of a device."; + + reference "RFC 6241, Section 7.5"; + + input { + container target { + description + "Particular configuration to lock."; + + choice config-target { + mandatory true; + description + "The configuration target to lock."; + + leaf candidate { + if-feature candidate; + type empty; + description + "The candidate configuration is the config target."; + } + leaf running { + type empty; + description + "The running configuration is the config target."; + } + leaf startup { + if-feature startup; + type empty; + description + "The startup configuration is the config target."; + } + } + } + } + } + + rpc unlock { + description + "The unlock operation is used to release a configuration lock, + previously obtained with the 'lock' operation."; + + reference "RFC 6241, Section 7.6"; + + input { + container target { + description + "Particular configuration to unlock."; + + choice config-target { + mandatory true; + description + "The configuration target to unlock."; + + leaf candidate { + if-feature candidate; + type empty; + description + "The candidate configuration is the config target."; + } + leaf running { + type empty; + description + "The running configuration is the config target."; + } + leaf startup { + if-feature startup; + type empty; + description + "The startup configuration is the config target."; + } + } + } + } + } + + rpc get { + description + "Retrieve running configuration and device state information."; + + reference "RFC 6241, Section 7.7"; + + input { + anyxml filter { + description + "This parameter specifies the portion of the system + configuration and state data to retrieve."; + nc:get-filter-element-attributes; + } + } + + output { + anyxml data { + description + "Copy of the running datastore subset and/or state + data that matched the filter criteria (if any). + An empty data container indicates that the request did not + produce any results."; + } + } + } + + rpc close-session { + description + "Request graceful termination of a NETCONF session."; + + reference "RFC 6241, Section 7.8"; + } + + rpc kill-session { + nacm:default-deny-all; + description + "Force the termination of a NETCONF session."; + + reference "RFC 6241, Section 7.9"; + + input { + leaf session-id { + type session-id-type; + mandatory true; + description + "Particular session to kill."; + } + } + } + + rpc commit { + if-feature candidate; + + description + "Commit the candidate configuration as the device's new + current configuration."; + + reference "RFC 6241, Section 8.3.4.1"; + + input { + leaf confirmed { + if-feature confirmed-commit; + type empty; + description + "Requests a confirmed commit."; + reference "RFC 6241, Section 8.3.4.1"; + } + + leaf confirm-timeout { + if-feature confirmed-commit; + type uint32 { + range "1..max"; + } + units "seconds"; + default "600"; // 10 minutes + description + "The timeout interval for a confirmed commit."; + reference "RFC 6241, Section 8.3.4.1"; + } + + leaf persist { + if-feature confirmed-commit; + type string; + description + "This parameter is used to make a confirmed commit + persistent. A persistent confirmed commit is not aborted + if the NETCONF session terminates. The only way to abort + a persistent confirmed commit is to let the timer expire, + or to use the <cancel-commit> operation. + + The value of this parameter is a token that must be given + in the 'persist-id' parameter of <commit> or + <cancel-commit> operations in order to confirm or cancel + the persistent confirmed commit. + + The token should be a random string."; + reference "RFC 6241, Section 8.3.4.1"; + } + + leaf persist-id { + if-feature confirmed-commit; + type string; + description + "This parameter is given in order to commit a persistent + confirmed commit. The value must be equal to the value + given in the 'persist' parameter to the <commit> operation. + If it does not match, the operation fails with an + 'invalid-value' error."; + reference "RFC 6241, Section 8.3.4.1"; + } + + } + } + + rpc discard-changes { + if-feature candidate; + + description + "Revert the candidate configuration to the current + running configuration."; + reference "RFC 6241, Section 8.3.4.2"; + } + + rpc cancel-commit { + if-feature confirmed-commit; + description + "This operation is used to cancel an ongoing confirmed commit. + If the confirmed commit is persistent, the parameter + 'persist-id' must be given, and it must match the value of the + 'persist' parameter."; + reference "RFC 6241, Section 8.4.4.1"; + + input { + leaf persist-id { + type string; + description + "This parameter is given in order to cancel a persistent + confirmed commit. The value must be equal to the value + given in the 'persist' parameter to the <commit> operation. + If it does not match, the operation fails with an + 'invalid-value' error."; + } + } + } + + rpc validate { + if-feature validate; + + description + "Validates the contents of the specified configuration."; + + reference "RFC 6241, Section 8.6.4.1"; + + input { + container source { + description + "Particular configuration to validate."; + + choice config-source { + mandatory true; + description + "The configuration source to validate."; + + leaf candidate { + if-feature candidate; + type empty; + description + "The candidate configuration is the config source."; + } + leaf running { + type empty; + description + "The running configuration is the config source."; + } + leaf startup { + if-feature startup; + type empty; + description + "The startup configuration is the config source."; + } + leaf url { + if-feature url; + type inet:uri; + description + "The URL-based configuration is the config source."; + } + anyxml config { + description + "Inline Config content: <config> element. Represents + an entire configuration datastore, not + a subset of the running datastore."; + } + } + } + } + } + +} diff --git a/tests/modules/yang/ietf-origin@2018-02-14.yang b/tests/modules/yang/ietf-origin@2018-02-14.yang new file mode 100644 index 0000000..3080c91 --- /dev/null +++ b/tests/modules/yang/ietf-origin@2018-02-14.yang @@ -0,0 +1,147 @@ +module ietf-origin { + yang-version 1.1; + namespace "urn:ietf:params:xml:ns:yang:ietf-origin"; + prefix or; + + import ietf-yang-metadata { + prefix md; + } + + organization + "IETF Network Modeling (NETMOD) Working Group"; + + contact + "WG Web: <https://datatracker.ietf.org/wg/netmod/> + + WG List: <mailto:netmod@ietf.org> + + Author: Martin Bjorklund + <mailto:mbj@tail-f.com> + + Author: Juergen Schoenwaelder + <mailto:j.schoenwaelder@jacobs-university.de> + + Author: Phil Shafer + <mailto:phil@juniper.net> + + Author: Kent Watsen + <mailto:kwatsen@juniper.net> + + Author: Rob Wilton + <rwilton@cisco.com>"; + + description + "This YANG module defines an 'origin' metadata annotation and a + set of identities for the origin value. + + Copyright (c) 2018 IETF Trust and the persons identified as + authors of the code. All rights reserved. + + Redistribution and use in source and binary forms, with or + without modification, is permitted pursuant to, and subject to + the license terms contained in, the Simplified BSD License set + forth in Section 4.c of the IETF Trust's Legal Provisions + Relating to IETF Documents + (https://trustee.ietf.org/license-info). + + This version of this YANG module is part of RFC 8342 + (https://www.rfc-editor.org/info/rfc8342); see the RFC itself + for full legal notices."; + + revision 2018-02-14 { + description + "Initial revision."; + reference + "RFC 8342: Network Management Datastore Architecture (NMDA)"; + } + + /* + * Identities + */ + + identity origin { + description + "Abstract base identity for the origin annotation."; + } + + identity intended { + base origin; + description + "Denotes configuration from the intended configuration + datastore."; + } + + identity dynamic { + base origin; + description + "Denotes configuration from a dynamic configuration + datastore."; + } + + identity system { + base origin; + description + "Denotes configuration originated by the system itself. + + Examples of system configuration include applied configuration + for an always-existing loopback interface, or interface + configuration that is auto-created due to the hardware + currently present in the device."; + } + + identity learned { + base origin; + description + "Denotes configuration learned from protocol interactions with + other devices, instead of via either the intended + configuration datastore or any dynamic configuration + datastore. + + Examples of protocols that provide learned configuration + include link-layer negotiations, routing protocols, and + DHCP."; + } + + identity default { + base origin; + description + "Denotes configuration that does not have a configured or + learned value but has a default value in use. Covers both + values defined in a 'default' statement and values defined + via an explanation in a 'description' statement."; + } + + identity unknown { + base origin; + description + "Denotes configuration for which the system cannot identify the + origin."; + } + + /* + * Type definitions + */ + + typedef origin-ref { + type identityref { + base origin; + } + description + "An origin identity reference."; + } + + /* + * Metadata annotations + */ + + md:annotation origin { + type origin-ref; + description + "The 'origin' annotation can be present on any configuration + data node in the operational state datastore. It specifies + from where the node originated. If not specified for a given + configuration data node, then the origin is the same as the + origin of its parent node in the data tree. The origin for + any top-level configuration data nodes must be specified."; + } +} diff --git a/tests/modules/yang/ietf-restconf@2017-01-26.yang b/tests/modules/yang/ietf-restconf@2017-01-26.yang new file mode 100644 index 0000000..b47455b --- /dev/null +++ b/tests/modules/yang/ietf-restconf@2017-01-26.yang @@ -0,0 +1,278 @@ +module ietf-restconf { + yang-version 1.1; + namespace "urn:ietf:params:xml:ns:yang:ietf-restconf"; + prefix "rc"; + + organization + "IETF NETCONF (Network Configuration) Working Group"; + + contact + "WG Web: <https://datatracker.ietf.org/wg/netconf/> + WG List: <mailto:netconf@ietf.org> + + Author: Andy Bierman + <mailto:andy@yumaworks.com> + + Author: Martin Bjorklund + <mailto:mbj@tail-f.com> + + Author: Kent Watsen + <mailto:kwatsen@juniper.net>"; + + description + "This module contains conceptual YANG specifications + for basic RESTCONF media type definitions used in + RESTCONF protocol messages. + + Note that the YANG definitions within this module do not + represent configuration data of any kind. + The 'restconf-media-type' YANG extension statement + provides a normative syntax for XML and JSON + message-encoding purposes. + + Copyright (c) 2017 IETF Trust and the persons identified as + authors of the code. All rights reserved. + + Redistribution and use in source and binary forms, with or + without modification, is permitted pursuant to, and subject + to the license terms contained in, the Simplified BSD License + set forth in Section 4.c of the IETF Trust's Legal Provisions + Relating to IETF Documents + (http://trustee.ietf.org/license-info). + + This version of this YANG module is part of RFC 8040; see + the RFC itself for full legal notices."; + + revision 2017-01-26 { + description + "Initial revision."; + reference + "RFC 8040: RESTCONF Protocol."; + } + + extension yang-data { + argument name { + yin-element true; + } + description + "This extension is used to specify a YANG data template that + represents conceptual data defined in YANG. It is + intended to describe hierarchical data independent of + protocol context or specific message-encoding format. + Data definition statements within a yang-data extension + specify the generic syntax for the specific YANG data + template, whose name is the argument of the 'yang-data' + extension statement. + + Note that this extension does not define a media type. + A specification using this extension MUST specify the + message-encoding rules, including the content media type. + + The mandatory 'name' parameter value identifies the YANG + data template that is being defined. It contains the + template name. + + This extension is ignored unless it appears as a top-level + statement. It MUST contain data definition statements + that result in exactly one container data node definition. + An instance of a YANG data template can thus be translated + into an XML instance document, whose top-level element + corresponds to the top-level container. + The module name and namespace values for the YANG module using + the extension statement are assigned to instance document data + conforming to the data definition statements within + this extension. + + The substatements of this extension MUST follow the + 'data-def-stmt' rule in the YANG ABNF. + + The XPath document root is the extension statement itself, + such that the child nodes of the document root are + represented by the data-def-stmt substatements within + this extension. This conceptual document is the context + for the following YANG statements: + + - must-stmt + - when-stmt + - path-stmt + - min-elements-stmt + - max-elements-stmt + - mandatory-stmt + - unique-stmt + - ordered-by + - instance-identifier data type + + The following data-def-stmt substatements are constrained + when used within a 'yang-data' extension statement. + + - The list-stmt is not required to have a key-stmt defined. + - The if-feature-stmt is ignored if present. + - The config-stmt is ignored if present. + - The available identity values for any 'identityref' + leaf or leaf-list nodes are limited to the module + containing this extension statement and the modules + imported into that module. + "; + } + + rc:yang-data yang-errors { + uses errors; + } + + rc:yang-data yang-api { + uses restconf; + } + + grouping errors { + description + "A grouping that contains a YANG container + representing the syntax and semantics of a + YANG Patch error report within a response message."; + + container errors { + description + "Represents an error report returned by the server if + a request results in an error."; + + list error { + description + "An entry containing information about one + specific error that occurred while processing + a RESTCONF request."; + reference + "RFC 6241, Section 4.3."; + + leaf error-type { + type enumeration { + enum transport { + description + "The transport layer."; + } + enum rpc { + description + "The rpc or notification layer."; + } + enum protocol { + description + "The protocol operation layer."; + } + enum application { + description + "The server application layer."; + } + } + mandatory true; + description + "The protocol layer where the error occurred."; + } + + leaf error-tag { + type string; + mandatory true; + description + "The enumerated error-tag."; + } + + leaf error-app-tag { + type string; + description + "The application-specific error-tag."; + } + + leaf error-path { + type instance-identifier; + description + "The YANG instance identifier associated + with the error node."; + } + + leaf error-message { + type string; + description + "A message describing the error."; + } + + anydata error-info { + description + "This anydata value MUST represent a container with + zero or more data nodes representing additional + error information."; + } + } + } + } + + grouping restconf { + description + "Conceptual grouping representing the RESTCONF + root resource."; + + container restconf { + description + "Conceptual container representing the RESTCONF + root resource."; + + container data { + description + "Container representing the datastore resource. + Represents the conceptual root of all state data + and configuration data supported by the server. + The child nodes of this container can be any data + resources that are defined as top-level data nodes + from the YANG modules advertised by the server in + the 'ietf-yang-library' module."; + } + + container operations { + description + "Container for all operation resources. + + Each resource is represented as an empty leaf with the + name of the RPC operation from the YANG 'rpc' statement. + + For example, the 'system-restart' RPC operation defined + in the 'ietf-system' module would be represented as + an empty leaf in the 'ietf-system' namespace. This is + a conceptual leaf and will not actually be found in + the module: + + module ietf-system { + leaf system-reset { + type empty; + } + } + + To invoke the 'system-restart' RPC operation: + + POST /restconf/operations/ietf-system:system-restart + + To discover the RPC operations supported by the server: + + GET /restconf/operations + + In XML, the YANG module namespace identifies the module: + + <system-restart + xmlns='urn:ietf:params:xml:ns:yang:ietf-system'/> + + In JSON, the YANG module name identifies the module: + + { 'ietf-system:system-restart' : [null] } + "; + } + leaf yang-library-version { + type string { + pattern '\d{4}-\d{2}-\d{2}'; + } + config false; + mandatory true; + description + "Identifies the revision date of the 'ietf-yang-library' + module that is implemented by this RESTCONF server. + Indicates the year, month, and day in YYYY-MM-DD + numeric format."; + } + } + } + +} diff --git a/tests/modules/yang/notifications@2008-07-14.yang b/tests/modules/yang/notifications@2008-07-14.yang new file mode 100644 index 0000000..b696f39 --- /dev/null +++ b/tests/modules/yang/notifications@2008-07-14.yang @@ -0,0 +1,95 @@ +module notifications { + + namespace "urn:ietf:params:xml:ns:netconf:notification:1.0"; + prefix "ncEvent"; + + import ietf-yang-types { prefix yang; } + + organization + "IETF NETCONF WG"; + + contact + "netconf@ops.ietf.org"; + + description + "Conversion of the 'ncEvent' XSD in the + NETCONF Notifications RFC."; + + reference + "RFC 5277."; + + revision 2008-07-14 { + description "RFC 5277 version."; + } + + typedef streamNameType { + description + "The name of an event stream."; + type string; + } + + rpc create-subscription { + description + "The command to create a notification subscription. It + takes as argument the name of the notification stream + and filter. Both of those options limit the content of + the subscription. In addition, there are two time-related + parameters, startTime and stopTime, which can be used to + select the time interval of interest to the notification + replay feature."; + + input { + leaf stream { + description + "An optional parameter that indicates which stream of events + is of interest. If not present, then events in the default + NETCONF stream will be sent."; + type streamNameType; + default "NETCONF"; + } + + anyxml filter { + description + "An optional parameter that indicates which subset of all + possible events is of interest. The format of this + parameter is the same as that of the filter parameter + in the NETCONF protocol operations. If not present, + all events not precluded by other parameters will + be sent."; + } + + leaf startTime { + description + "A parameter used to trigger the replay feature and + indicates that the replay should start at the time + specified. If start time is not present, this is not a + replay subscription."; + type yang:date-and-time; + } + + leaf stopTime { + // must ". >= ../startTime"; + description + "An optional parameter used with the optional replay + feature to indicate the newest notifications of + interest. If stop time is not present, the notifications + will continue until the subscription is terminated. + Must be used with startTime."; + type yang:date-and-time; + } + } + } + + /*container notification { + description "internal struct to start a notification"; + config false; + + leaf eventTime { + mandatory true; + type yang:date-and-time; + } + + // eventType and any data content goes here + }*/ +} + diff --git a/tests/modules/yang/sm-extension.yang b/tests/modules/yang/sm-extension.yang new file mode 100644 index 0000000..63d164a --- /dev/null +++ b/tests/modules/yang/sm-extension.yang @@ -0,0 +1,17 @@ +module sm-extension { + yang-version 1.1; + namespace "urn:sm-ext"; + prefix "sm-ext"; + + list tlist { + key "name"; + leaf name { + type uint32; + } + } + container tcont { + leaf tleaf { + type uint32; + } + } +} diff --git a/tests/modules/yang/sm-mod.yang b/tests/modules/yang/sm-mod.yang new file mode 100644 index 0000000..8ac834e --- /dev/null +++ b/tests/modules/yang/sm-mod.yang @@ -0,0 +1,9 @@ +module sm-mod { + yang-version 1.1; + namespace "urn:sm-mod"; + prefix "sm-mod"; + + import sm-modp { + prefix smp; + } +} diff --git a/tests/modules/yang/sm-modp.yang b/tests/modules/yang/sm-modp.yang new file mode 100644 index 0000000..33f45b4 --- /dev/null +++ b/tests/modules/yang/sm-modp.yang @@ -0,0 +1,24 @@ +module sm-modp { + yang-version 1.1; + namespace "urn:sm-modp"; + prefix "sm-modp"; + + import ietf-yang-schema-mount { + prefix yangmnt; + } + + revision 2017-01-26; + + container ncmp { + yangmnt:mount-point "root"; + } + + container not-compiled { + leaf first { + type string; + } + leaf second { + type string; + } + } +} diff --git a/tests/modules/yang/sm-rpcnotif.yang b/tests/modules/yang/sm-rpcnotif.yang new file mode 100644 index 0000000..fda5442 --- /dev/null +++ b/tests/modules/yang/sm-rpcnotif.yang @@ -0,0 +1,25 @@ +module sm-rpcnotif { + yang-version 1.1; + namespace "urn:rpcnotif"; + prefix "smrn"; + + container cont { + notification cn; + action cr { + input { + leaf in { + type string; + } + } + output { + leaf out { + type string; + } + } + } + } + rpc r1; + rpc r2; + notification n1; + notification n2; +} diff --git a/tests/modules/yang/sm.yang b/tests/modules/yang/sm.yang new file mode 100644 index 0000000..3da9c9a --- /dev/null +++ b/tests/modules/yang/sm.yang @@ -0,0 +1,39 @@ +module sm { + yang-version 1.1; + namespace "urn:sm"; + prefix "sm"; + + import ietf-yang-schema-mount { + prefix yangmnt; + } + import ietf-interfaces { + prefix if; + } + + container root { + yangmnt:mount-point "root"; + } + container root2 { + yangmnt:mount-point "root"; + } + container root3 { + list ls { + key name; + leaf name { + type string; + } + yangmnt:mount-point "mnt-root"; + } + } + leaf target { + type string; + } + + augment /if:interfaces/if:interface { + leaf sm-name { + type leafref { + path "/sm:target"; + } + } + } +} |