Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 186 insertions, 0 deletions

diff --git a/Documentation/ABI/obsolete/sysfs-bus-iio b/Documentation/ABI/obsolete/sysfs-bus-iio
new file mode 100644
index 000000000..b64394b0b
--- /dev/null
+++ b/Documentation/ABI/obsolete/sysfs-bus-iio
@@ -0,0 +1,186 @@
+What:		/sys/bus/iio/devices/iio:deviceX/buffer/length
+KernelVersion:	2.6.35
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Number of scans contained by the buffer.
+
+		Since Kernel 5.11, multiple buffers are supported.
+		so, it is better to use, instead:
+
+			/sys/bus/iio/devices/iio:deviceX/bufferY/length
+
+What:		/sys/bus/iio/devices/iio:deviceX/buffer/enable
+KernelVersion:	2.6.35
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Actually start the buffer capture up.  Will start trigger
+		if first device and appropriate.
+
+		Since Kernel 5.11, multiple buffers are supported.
+		so, it is better to use, instead:
+
+			/sys/bus/iio/devices/iio:deviceX/bufferY/enable
+
+What:		/sys/bus/iio/devices/iio:deviceX/scan_elements
+KernelVersion:	2.6.37
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Directory containing interfaces for elements that will be
+		captured for a single triggered sample set in the buffer.
+
+		Since kernel 5.11 the scan_elements attributes are merged into
+		the bufferY directory, to be configurable per buffer.
+
+What:		/sys/.../iio:deviceX/scan_elements/in_accel_x_en
+What:		/sys/.../iio:deviceX/scan_elements/in_accel_y_en
+What:		/sys/.../iio:deviceX/scan_elements/in_accel_z_en
+What:		/sys/.../iio:deviceX/scan_elements/in_anglvel_x_en
+What:		/sys/.../iio:deviceX/scan_elements/in_anglvel_y_en
+What:		/sys/.../iio:deviceX/scan_elements/in_anglvel_z_en
+What:		/sys/.../iio:deviceX/scan_elements/in_magn_x_en
+What:		/sys/.../iio:deviceX/scan_elements/in_magn_y_en
+What:		/sys/.../iio:deviceX/scan_elements/in_magn_z_en
+What:		/sys/.../iio:deviceX/scan_elements/in_rot_from_north_magnetic_en
+What:		/sys/.../iio:deviceX/scan_elements/in_rot_from_north_true_en
+What:		/sys/.../iio:deviceX/scan_elements/in_rot_from_north_magnetic_tilt_comp_en
+What:		/sys/.../iio:deviceX/scan_elements/in_rot_from_north_true_tilt_comp_en
+What:		/sys/.../iio:deviceX/scan_elements/in_timestamp_en
+What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_supply_en
+What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_en
+What:		/sys/.../iio:deviceX/scan_elements/in_voltageY-voltageZ_en
+What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_i_en
+What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_q_en
+What:		/sys/.../iio:deviceX/scan_elements/in_voltage_i_en
+What:		/sys/.../iio:deviceX/scan_elements/in_voltage_q_en
+What:		/sys/.../iio:deviceX/scan_elements/in_incli_x_en
+What:		/sys/.../iio:deviceX/scan_elements/in_incli_y_en
+What:		/sys/.../iio:deviceX/scan_elements/in_pressureY_en
+What:		/sys/.../iio:deviceX/scan_elements/in_pressure_en
+What:		/sys/.../iio:deviceX/scan_elements/in_rot_quaternion_en
+What:		/sys/.../iio:deviceX/scan_elements/in_proximity_en
+KernelVersion:	2.6.37
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Scan element control for triggered data capture.
+
+		Since kernel 5.11 the scan_elements attributes are merged into
+		the bufferY directory, to be configurable per buffer.
+
+What:		/sys/.../iio:deviceX/scan_elements/in_accel_type
+What:		/sys/.../iio:deviceX/scan_elements/in_anglvel_type
+What:		/sys/.../iio:deviceX/scan_elements/in_magn_type
+What:		/sys/.../iio:deviceX/scan_elements/in_incli_type
+What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_type
+What:		/sys/.../iio:deviceX/scan_elements/in_voltage_type
+What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_supply_type
+What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_i_type
+What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_q_type
+What:		/sys/.../iio:deviceX/scan_elements/in_voltage_i_type
+What:		/sys/.../iio:deviceX/scan_elements/in_voltage_q_type
+What:		/sys/.../iio:deviceX/scan_elements/in_timestamp_type
+What:		/sys/.../iio:deviceX/scan_elements/in_pressureY_type
+What:		/sys/.../iio:deviceX/scan_elements/in_pressure_type
+What:		/sys/.../iio:deviceX/scan_elements/in_rot_quaternion_type
+What:		/sys/.../iio:deviceX/scan_elements/in_proximity_type
+KernelVersion:	2.6.37
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Description of the scan element data storage within the buffer
+		and hence the form in which it is read from user-space.
+		Form is [be|le]:[s|u]bits/storagebits[>>shift].
+		be or le specifies big or little endian. s or u specifies if
+		signed (2's complement) or unsigned. bits is the number of bits
+		of data and storagebits is the space (after padding) that it
+		occupies in the buffer. shift if specified, is the shift that
+		needs to be applied prior to masking out unused bits. Some
+		devices put their data in the middle of the transferred elements
+		with additional information on both sides.  Note that some
+		devices will have additional information in the unused bits
+		so to get a clean value, the bits value must be used to mask
+		the buffer output value appropriately.  The storagebits value
+		also specifies the data alignment.  So s48/64>>2 will be a
+		signed 48 bit integer stored in a 64 bit location aligned to
+		a 64 bit boundary. To obtain the clean value, shift right 2
+		and apply a mask to zero the top 16 bits of the result.
+		For other storage combinations this attribute will be extended
+		appropriately.
+
+		Since kernel 5.11 the scan_elements attributes are merged into
+		the bufferY directory, to be configurable per buffer.
+
+What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_index
+What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_supply_index
+What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_i_index
+What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_q_index
+What:		/sys/.../iio:deviceX/scan_elements/in_voltage_i_index
+What:		/sys/.../iio:deviceX/scan_elements/in_voltage_q_index
+What:		/sys/.../iio:deviceX/scan_elements/in_accel_x_index
+What:		/sys/.../iio:deviceX/scan_elements/in_accel_y_index
+What:		/sys/.../iio:deviceX/scan_elements/in_accel_z_index
+What:		/sys/.../iio:deviceX/scan_elements/in_anglvel_x_index
+What:		/sys/.../iio:deviceX/scan_elements/in_anglvel_y_index
+What:		/sys/.../iio:deviceX/scan_elements/in_anglvel_z_index
+What:		/sys/.../iio:deviceX/scan_elements/in_magn_x_index
+What:		/sys/.../iio:deviceX/scan_elements/in_magn_y_index
+What:		/sys/.../iio:deviceX/scan_elements/in_magn_z_index
+What:		/sys/.../iio:deviceX/scan_elements/in_rot_from_north_magnetic_index
+What:		/sys/.../iio:deviceX/scan_elements/in_rot_from_north_true_index
+What:		/sys/.../iio:deviceX/scan_elements/in_rot_from_north_magnetic_tilt_comp_index
+What:		/sys/.../iio:deviceX/scan_elements/in_rot_from_north_true_tilt_comp_index
+What:		/sys/.../iio:deviceX/scan_elements/in_incli_x_index
+What:		/sys/.../iio:deviceX/scan_elements/in_incli_y_index
+What:		/sys/.../iio:deviceX/scan_elements/in_timestamp_index
+What:		/sys/.../iio:deviceX/scan_elements/in_pressureY_index
+What:		/sys/.../iio:deviceX/scan_elements/in_pressure_index
+What:		/sys/.../iio:deviceX/scan_elements/in_rot_quaternion_index
+What:		/sys/.../iio:deviceX/scan_elements/in_proximity_index
+KernelVersion:	2.6.37
+Description:
+		A single positive integer specifying the position of this
+		scan element in the buffer. Note these are not dependent on
+		what is enabled and may not be contiguous. Thus for user-space
+		to establish the full layout these must be used in conjunction
+		with all _en attributes to establish which channels are present,
+		and the relevant _type attributes to establish the data storage
+		format.
+
+		Since kernel 5.11 the scan_elements attributes are merged into
+		the bufferY directory, to be configurable per buffer.
+
+What:		/sys/bus/iio/devices/iio:deviceX/buffer/watermark
+KernelVersion:	4.2
+Contact:	linux-iio@vger.kernel.org
+Description:
+		A single positive integer specifying the maximum number of scan
+		elements to wait for.
+
+		Poll will block until the watermark is reached.
+
+		Blocking read will wait until the minimum between the requested
+		read amount or the low water mark is available.
+
+		Non-blocking read will retrieve the available samples from the
+		buffer even if there are less samples then watermark level. This
+		allows the application to block on poll with a timeout and read
+		the available samples after the timeout expires and thus have a
+		maximum delay guarantee.
+
+		Since Kernel 5.11, multiple buffers are supported.
+		so, it is better to use, instead:
+
+			/sys/bus/iio/devices/iio:deviceX/bufferY/watermark
+
+What:		/sys/bus/iio/devices/iio:deviceX/buffer/data_available
+KernelVersion: 4.16
+Contact:	linux-iio@vger.kernel.org
+Description:
+		A read-only value indicating the bytes of data available in the
+		buffer. In the case of an output buffer, this indicates the
+		amount of empty space available to write data to. In the case of
+		an input buffer, this indicates the amount of data available for
+		reading.
+
+		Since Kernel 5.11, multiple buffers are supported.
+		so, it is better to use, instead:
+
+			/sys/bus/iio/devices/iio:deviceX/bufferY/data_available