Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1238 insertions, 0 deletions

diff --git a/Documentation/RCU/whatisRCU.rst b/Documentation/RCU/whatisRCU.rst
new file mode 100644
index 000000000..1c747ac3f
--- /dev/null
+++ b/Documentation/RCU/whatisRCU.rst
@@ -0,0 +1,1238 @@
+.. _whatisrcu_doc:
+
+What is RCU?  --  "Read, Copy, Update"
+======================================
+
+Please note that the "What is RCU?" LWN series is an excellent place
+to start learning about RCU:
+
+| 1.	What is RCU, Fundamentally?  https://lwn.net/Articles/262464/
+| 2.	What is RCU? Part 2: Usage   https://lwn.net/Articles/263130/
+| 3.	RCU part 3: the RCU API      https://lwn.net/Articles/264090/
+| 4.	The RCU API, 2010 Edition    https://lwn.net/Articles/418853/
+| 	2010 Big API Table           https://lwn.net/Articles/419086/
+| 5.	The RCU API, 2014 Edition    https://lwn.net/Articles/609904/
+|	2014 Big API Table           https://lwn.net/Articles/609973/
+| 6.	The RCU API, 2019 Edition    https://lwn.net/Articles/777036/
+|	2019 Big API Table           https://lwn.net/Articles/777165/
+
+
+What is RCU?
+
+RCU is a synchronization mechanism that was added to the Linux kernel
+during the 2.5 development effort that is optimized for read-mostly
+situations.  Although RCU is actually quite simple once you understand it,
+getting there can sometimes be a challenge.  Part of the problem is that
+most of the past descriptions of RCU have been written with the mistaken
+assumption that there is "one true way" to describe RCU.  Instead,
+the experience has been that different people must take different paths
+to arrive at an understanding of RCU.  This document provides several
+different paths, as follows:
+
+:ref:`1.	RCU OVERVIEW <1_whatisRCU>`
+
+:ref:`2.	WHAT IS RCU'S CORE API? <2_whatisRCU>`
+
+:ref:`3.	WHAT ARE SOME EXAMPLE USES OF CORE RCU API? <3_whatisRCU>`
+
+:ref:`4.	WHAT IF MY UPDATING THREAD CANNOT BLOCK? <4_whatisRCU>`
+
+:ref:`5.	WHAT ARE SOME SIMPLE IMPLEMENTATIONS OF RCU? <5_whatisRCU>`
+
+:ref:`6.	ANALOGY WITH READER-WRITER LOCKING <6_whatisRCU>`
+
+:ref:`7.	ANALOGY WITH REFERENCE COUNTING <7_whatisRCU>`
+
+:ref:`8.	FULL LIST OF RCU APIs <8_whatisRCU>`
+
+:ref:`9.	ANSWERS TO QUICK QUIZZES <9_whatisRCU>`
+
+People who prefer starting with a conceptual overview should focus on
+Section 1, though most readers will profit by reading this section at
+some point.  People who prefer to start with an API that they can then
+experiment with should focus on Section 2.  People who prefer to start
+with example uses should focus on Sections 3 and 4.  People who need to
+understand the RCU implementation should focus on Section 5, then dive
+into the kernel source code.  People who reason best by analogy should
+focus on Section 6.  Section 7 serves as an index to the docbook API
+documentation, and Section 8 is the traditional answer key.
+
+So, start with the section that makes the most sense to you and your
+preferred method of learning.  If you need to know everything about
+everything, feel free to read the whole thing -- but if you are really
+that type of person, you have perused the source code and will therefore
+never need this document anyway.  ;-)
+
+.. _1_whatisRCU:
+
+1.  RCU OVERVIEW
+----------------
+
+The basic idea behind RCU is to split updates into "removal" and
+"reclamation" phases.  The removal phase removes references to data items
+within a data structure (possibly by replacing them with references to
+new versions of these data items), and can run concurrently with readers.
+The reason that it is safe to run the removal phase concurrently with
+readers is the semantics of modern CPUs guarantee that readers will see
+either the old or the new version of the data structure rather than a
+partially updated reference.  The reclamation phase does the work of reclaiming
+(e.g., freeing) the data items removed from the data structure during the
+removal phase.  Because reclaiming data items can disrupt any readers
+concurrently referencing those data items, the reclamation phase must
+not start until readers no longer hold references to those data items.
+
+Splitting the update into removal and reclamation phases permits the
+updater to perform the removal phase immediately, and to defer the
+reclamation phase until all readers active during the removal phase have
+completed, either by blocking until they finish or by registering a
+callback that is invoked after they finish.  Only readers that are active
+during the removal phase need be considered, because any reader starting
+after the removal phase will be unable to gain a reference to the removed
+data items, and therefore cannot be disrupted by the reclamation phase.
+
+So the typical RCU update sequence goes something like the following:
+
+a.	Remove pointers to a data structure, so that subsequent
+	readers cannot gain a reference to it.
+
+b.	Wait for all previous readers to complete their RCU read-side
+	critical sections.
+
+c.	At this point, there cannot be any readers who hold references
+	to the data structure, so it now may safely be reclaimed
+	(e.g., kfree()d).
+
+Step (b) above is the key idea underlying RCU's deferred destruction.
+The ability to wait until all readers are done allows RCU readers to
+use much lighter-weight synchronization, in some cases, absolutely no
+synchronization at all.  In contrast, in more conventional lock-based
+schemes, readers must use heavy-weight synchronization in order to
+prevent an updater from deleting the data structure out from under them.
+This is because lock-based updaters typically update data items in place,
+and must therefore exclude readers.  In contrast, RCU-based updaters
+typically take advantage of the fact that writes to single aligned
+pointers are atomic on modern CPUs, allowing atomic insertion, removal,
+and replacement of data items in a linked structure without disrupting
+readers.  Concurrent RCU readers can then continue accessing the old
+versions, and can dispense with the atomic operations, memory barriers,
+and communications cache misses that are so expensive on present-day
+SMP computer systems, even in absence of lock contention.
+
+In the three-step procedure shown above, the updater is performing both
+the removal and the reclamation step, but it is often helpful for an
+entirely different thread to do the reclamation, as is in fact the case
+in the Linux kernel's directory-entry cache (dcache).  Even if the same
+thread performs both the update step (step (a) above) and the reclamation
+step (step (c) above), it is often helpful to think of them separately.
+For example, RCU readers and updaters need not communicate at all,
+but RCU provides implicit low-overhead communication between readers
+and reclaimers, namely, in step (b) above.
+
+So how the heck can a reclaimer tell when a reader is done, given
+that readers are not doing any sort of synchronization operations???
+Read on to learn about how RCU's API makes this easy.
+
+.. _2_whatisRCU:
+
+2.  WHAT IS RCU'S CORE API?
+---------------------------
+
+The core RCU API is quite small:
+
+a.	rcu_read_lock()
+b.	rcu_read_unlock()
+c.	synchronize_rcu() / call_rcu()
+d.	rcu_assign_pointer()
+e.	rcu_dereference()
+
+There are many other members of the RCU API, but the rest can be
+expressed in terms of these five, though most implementations instead
+express synchronize_rcu() in terms of the call_rcu() callback API.
+
+The five core RCU APIs are described below, the other 18 will be enumerated
+later.  See the kernel docbook documentation for more info, or look directly
+at the function header comments.
+
+rcu_read_lock()
+^^^^^^^^^^^^^^^
+	void rcu_read_lock(void);
+
+	Used by a reader to inform the reclaimer that the reader is
+	entering an RCU read-side critical section.  It is illegal
+	to block while in an RCU read-side critical section, though
+	kernels built with CONFIG_PREEMPT_RCU can preempt RCU
+	read-side critical sections.  Any RCU-protected data structure
+	accessed during an RCU read-side critical section is guaranteed to
+	remain unreclaimed for the full duration of that critical section.
+	Reference counts may be used in conjunction with RCU to maintain
+	longer-term references to data structures.
+
+rcu_read_unlock()
+^^^^^^^^^^^^^^^^^
+	void rcu_read_unlock(void);
+
+	Used by a reader to inform the reclaimer that the reader is
+	exiting an RCU read-side critical section.  Note that RCU
+	read-side critical sections may be nested and/or overlapping.
+
+synchronize_rcu()
+^^^^^^^^^^^^^^^^^
+	void synchronize_rcu(void);
+
+	Marks the end of updater code and the beginning of reclaimer
+	code.  It does this by blocking until all pre-existing RCU
+	read-side critical sections on all CPUs have completed.
+	Note that synchronize_rcu() will **not** necessarily wait for
+	any subsequent RCU read-side critical sections to complete.
+	For example, consider the following sequence of events::
+
+	         CPU 0                  CPU 1                 CPU 2
+	     ----------------- ------------------------- ---------------
+	 1.  rcu_read_lock()
+	 2.                    enters synchronize_rcu()
+	 3.                                               rcu_read_lock()
+	 4.  rcu_read_unlock()
+	 5.                     exits synchronize_rcu()
+	 6.                                              rcu_read_unlock()
+
+	To reiterate, synchronize_rcu() waits only for ongoing RCU
+	read-side critical sections to complete, not necessarily for
+	any that begin after synchronize_rcu() is invoked.
+
+	Of course, synchronize_rcu() does not necessarily return
+	**immediately** after the last pre-existing RCU read-side critical
+	section completes.  For one thing, there might well be scheduling
+	delays.  For another thing, many RCU implementations process
+	requests in batches in order to improve efficiencies, which can
+	further delay synchronize_rcu().
+
+	Since synchronize_rcu() is the API that must figure out when
+	readers are done, its implementation is key to RCU.  For RCU
+	to be useful in all but the most read-intensive situations,
+	synchronize_rcu()'s overhead must also be quite small.
+
+	The call_rcu() API is a callback form of synchronize_rcu(),
+	and is described in more detail in a later section.  Instead of
+	blocking, it registers a function and argument which are invoked
+	after all ongoing RCU read-side critical sections have completed.
+	This callback variant is particularly useful in situations where
+	it is illegal to block or where update-side performance is
+	critically important.
+
+	However, the call_rcu() API should not be used lightly, as use
+	of the synchronize_rcu() API generally results in simpler code.
+	In addition, the synchronize_rcu() API has the nice property
+	of automatically limiting update rate should grace periods
+	be delayed.  This property results in system resilience in face
+	of denial-of-service attacks.  Code using call_rcu() should limit
+	update rate in order to gain this same sort of resilience.  See
+	checklist.rst for some approaches to limiting the update rate.
+
+rcu_assign_pointer()
+^^^^^^^^^^^^^^^^^^^^
+	void rcu_assign_pointer(p, typeof(p) v);
+
+	Yes, rcu_assign_pointer() **is** implemented as a macro, though it
+	would be cool to be able to declare a function in this manner.
+	(Compiler experts will no doubt disagree.)
+
+	The updater uses this function to assign a new value to an
+	RCU-protected pointer, in order to safely communicate the change
+	in value from the updater to the reader.  This macro does not
+	evaluate to an rvalue, but it does execute any memory-barrier
+	instructions required for a given CPU architecture.
+
+	Perhaps just as important, it serves to document (1) which
+	pointers are protected by RCU and (2) the point at which a
+	given structure becomes accessible to other CPUs.  That said,
+	rcu_assign_pointer() is most frequently used indirectly, via
+	the _rcu list-manipulation primitives such as list_add_rcu().
+
+rcu_dereference()
+^^^^^^^^^^^^^^^^^
+	typeof(p) rcu_dereference(p);
+
+	Like rcu_assign_pointer(), rcu_dereference() must be implemented
+	as a macro.
+
+	The reader uses rcu_dereference() to fetch an RCU-protected
+	pointer, which returns a value that may then be safely
+	dereferenced.  Note that rcu_dereference() does not actually
+	dereference the pointer, instead, it protects the pointer for
+	later dereferencing.  It also executes any needed memory-barrier
+	instructions for a given CPU architecture.  Currently, only Alpha
+	needs memory barriers within rcu_dereference() -- on other CPUs,
+	it compiles to nothing, not even a compiler directive.
+
+	Common coding practice uses rcu_dereference() to copy an
+	RCU-protected pointer to a local variable, then dereferences
+	this local variable, for example as follows::
+
+		p = rcu_dereference(head.next);
+		return p->data;
+
+	However, in this case, one could just as easily combine these
+	into one statement::
+
+		return rcu_dereference(head.next)->data;
+
+	If you are going to be fetching multiple fields from the
+	RCU-protected structure, using the local variable is of
+	course preferred.  Repeated rcu_dereference() calls look
+	ugly, do not guarantee that the same pointer will be returned
+	if an update happened while in the critical section, and incur
+	unnecessary overhead on Alpha CPUs.
+
+	Note that the value returned by rcu_dereference() is valid
+	only within the enclosing RCU read-side critical section [1]_.
+	For example, the following is **not** legal::
+
+		rcu_read_lock();
+		p = rcu_dereference(head.next);
+		rcu_read_unlock();
+		x = p->address;	/* BUG!!! */
+		rcu_read_lock();
+		y = p->data;	/* BUG!!! */
+		rcu_read_unlock();
+
+	Holding a reference from one RCU read-side critical section
+	to another is just as illegal as holding a reference from
+	one lock-based critical section to another!  Similarly,
+	using a reference outside of the critical section in which
+	it was acquired is just as illegal as doing so with normal
+	locking.
+
+	As with rcu_assign_pointer(), an important function of
+	rcu_dereference() is to document which pointers are protected by
+	RCU, in particular, flagging a pointer that is subject to changing
+	at any time, including immediately after the rcu_dereference().
+	And, again like rcu_assign_pointer(), rcu_dereference() is
+	typically used indirectly, via the _rcu list-manipulation
+	primitives, such as list_for_each_entry_rcu() [2]_.
+
+.. 	[1] The variant rcu_dereference_protected() can be used outside
+	of an RCU read-side critical section as long as the usage is
+	protected by locks acquired by the update-side code.  This variant
+	avoids the lockdep warning that would happen when using (for
+	example) rcu_dereference() without rcu_read_lock() protection.
+	Using rcu_dereference_protected() also has the advantage
+	of permitting compiler optimizations that rcu_dereference()
+	must prohibit.	The rcu_dereference_protected() variant takes
+	a lockdep expression to indicate which locks must be acquired
+	by the caller. If the indicated protection is not provided,
+	a lockdep splat is emitted.  See Design/Requirements/Requirements.rst
+	and the API's code comments for more details and example usage.
+
+.. 	[2] If the list_for_each_entry_rcu() instance might be used by
+	update-side code as well as by RCU readers, then an additional
+	lockdep expression can be added to its list of arguments.
+	For example, given an additional "lock_is_held(&mylock)" argument,
+	the RCU lockdep code would complain only if this instance was
+	invoked outside of an RCU read-side critical section and without
+	the protection of mylock.
+
+The following diagram shows how each API communicates among the
+reader, updater, and reclaimer.
+::
+
+
+	    rcu_assign_pointer()
+	                            +--------+
+	    +---------------------->| reader |---------+
+	    |                       +--------+         |
+	    |                           |              |
+	    |                           |              | Protect:
+	    |                           |              | rcu_read_lock()
+	    |                           |              | rcu_read_unlock()
+	    |        rcu_dereference()  |              |
+	    +---------+                 |              |
+	    | updater |<----------------+              |
+	    +---------+                                V
+	    |                                    +-----------+
+	    +----------------------------------->| reclaimer |
+	                                         +-----------+
+	      Defer:
+	      synchronize_rcu() & call_rcu()
+
+
+The RCU infrastructure observes the time sequence of rcu_read_lock(),
+rcu_read_unlock(), synchronize_rcu(), and call_rcu() invocations in
+order to determine when (1) synchronize_rcu() invocations may return
+to their callers and (2) call_rcu() callbacks may be invoked.  Efficient
+implementations of the RCU infrastructure make heavy use of batching in
+order to amortize their overhead over many uses of the corresponding APIs.
+
+There are at least three flavors of RCU usage in the Linux kernel. The diagram
+above shows the most common one. On the updater side, the rcu_assign_pointer(),
+synchronize_rcu() and call_rcu() primitives used are the same for all three
+flavors. However for protection (on the reader side), the primitives used vary
+depending on the flavor:
+
+a.	rcu_read_lock() / rcu_read_unlock()
+	rcu_dereference()
+
+b.	rcu_read_lock_bh() / rcu_read_unlock_bh()
+	local_bh_disable() / local_bh_enable()
+	rcu_dereference_bh()
+
+c.	rcu_read_lock_sched() / rcu_read_unlock_sched()
+	preempt_disable() / preempt_enable()
+	local_irq_save() / local_irq_restore()
+	hardirq enter / hardirq exit
+	NMI enter / NMI exit
+	rcu_dereference_sched()
+
+These three flavors are used as follows:
+
+a.	RCU applied to normal data structures.
+
+b.	RCU applied to networking data structures that may be subjected
+	to remote denial-of-service attacks.
+
+c.	RCU applied to scheduler and interrupt/NMI-handler tasks.
+
+Again, most uses will be of (a).  The (b) and (c) cases are important
+for specialized uses, but are relatively uncommon.
+
+.. _3_whatisRCU:
+
+3.  WHAT ARE SOME EXAMPLE USES OF CORE RCU API?
+-----------------------------------------------
+
+This section shows a simple use of the core RCU API to protect a
+global pointer to a dynamically allocated structure.  More-typical
+uses of RCU may be found in listRCU.rst, arrayRCU.rst, and NMI-RCU.rst.
+::
+
+	struct foo {
+		int a;
+		char b;
+		long c;
+	};
+	DEFINE_SPINLOCK(foo_mutex);
+
+	struct foo __rcu *gbl_foo;
+
+	/*
+	 * Create a new struct foo that is the same as the one currently
+	 * pointed to by gbl_foo, except that field "a" is replaced
+	 * with "new_a".  Points gbl_foo to the new structure, and
+	 * frees up the old structure after a grace period.
+	 *
+	 * Uses rcu_assign_pointer() to ensure that concurrent readers
+	 * see the initialized version of the new structure.
+	 *
+	 * Uses synchronize_rcu() to ensure that any readers that might
+	 * have references to the old structure complete before freeing
+	 * the old structure.
+	 */
+	void foo_update_a(int new_a)
+	{
+		struct foo *new_fp;
+		struct foo *old_fp;
+
+		new_fp = kmalloc(sizeof(*new_fp), GFP_KERNEL);
+		spin_lock(&foo_mutex);
+		old_fp = rcu_dereference_protected(gbl_foo, lockdep_is_held(&foo_mutex));
+		*new_fp = *old_fp;
+		new_fp->a = new_a;
+		rcu_assign_pointer(gbl_foo, new_fp);
+		spin_unlock(&foo_mutex);
+		synchronize_rcu();
+		kfree(old_fp);
+	}
+
+	/*
+	 * Return the value of field "a" of the current gbl_foo
+	 * structure.  Use rcu_read_lock() and rcu_read_unlock()
+	 * to ensure that the structure does not get deleted out
+	 * from under us, and use rcu_dereference() to ensure that
+	 * we see the initialized version of the structure (important
+	 * for DEC Alpha and for people reading the code).
+	 */
+	int foo_get_a(void)
+	{
+		int retval;
+
+		rcu_read_lock();
+		retval = rcu_dereference(gbl_foo)->a;
+		rcu_read_unlock();
+		return retval;
+	}
+
+So, to sum up:
+
+-	Use rcu_read_lock() and rcu_read_unlock() to guard RCU
+	read-side critical sections.
+
+-	Within an RCU read-side critical section, use rcu_dereference()
+	to dereference RCU-protected pointers.
+
+-	Use some solid scheme (such as locks or semaphores) to
+	keep concurrent updates from interfering with each other.
+
+-	Use rcu_assign_pointer() to update an RCU-protected pointer.
+	This primitive protects concurrent readers from the updater,
+	**not** concurrent updates from each other!  You therefore still
+	need to use locking (or something similar) to keep concurrent
+	rcu_assign_pointer() primitives from interfering with each other.
+
+-	Use synchronize_rcu() **after** removing a data element from an
+	RCU-protected data structure, but **before** reclaiming/freeing
+	the data element, in order to wait for the completion of all
+	RCU read-side critical sections that might be referencing that
+	data item.
+
+See checklist.rst for additional rules to follow when using RCU.
+And again, more-typical uses of RCU may be found in listRCU.rst,
+arrayRCU.rst, and NMI-RCU.rst.
+
+.. _4_whatisRCU:
+
+4.  WHAT IF MY UPDATING THREAD CANNOT BLOCK?
+--------------------------------------------
+
+In the example above, foo_update_a() blocks until a grace period elapses.
+This is quite simple, but in some cases one cannot afford to wait so
+long -- there might be other high-priority work to be done.
+
+In such cases, one uses call_rcu() rather than synchronize_rcu().
+The call_rcu() API is as follows::
+
+	void call_rcu(struct rcu_head *head, rcu_callback_t func);
+
+This function invokes func(head) after a grace period has elapsed.
+This invocation might happen from either softirq or process context,
+so the function is not permitted to block.  The foo struct needs to
+have an rcu_head structure added, perhaps as follows::
+
+	struct foo {
+		int a;
+		char b;
+		long c;
+		struct rcu_head rcu;
+	};
+
+The foo_update_a() function might then be written as follows::
+
+	/*
+	 * Create a new struct foo that is the same as the one currently
+	 * pointed to by gbl_foo, except that field "a" is replaced
+	 * with "new_a".  Points gbl_foo to the new structure, and
+	 * frees up the old structure after a grace period.
+	 *
+	 * Uses rcu_assign_pointer() to ensure that concurrent readers
+	 * see the initialized version of the new structure.
+	 *
+	 * Uses call_rcu() to ensure that any readers that might have
+	 * references to the old structure complete before freeing the
+	 * old structure.
+	 */
+	void foo_update_a(int new_a)
+	{
+		struct foo *new_fp;
+		struct foo *old_fp;
+
+		new_fp = kmalloc(sizeof(*new_fp), GFP_KERNEL);
+		spin_lock(&foo_mutex);
+		old_fp = rcu_dereference_protected(gbl_foo, lockdep_is_held(&foo_mutex));
+		*new_fp = *old_fp;
+		new_fp->a = new_a;
+		rcu_assign_pointer(gbl_foo, new_fp);
+		spin_unlock(&foo_mutex);
+		call_rcu(&old_fp->rcu, foo_reclaim);
+	}
+
+The foo_reclaim() function might appear as follows::
+
+	void foo_reclaim(struct rcu_head *rp)
+	{
+		struct foo *fp = container_of(rp, struct foo, rcu);
+
+		foo_cleanup(fp->a);
+
+		kfree(fp);
+	}
+
+The container_of() primitive is a macro that, given a pointer into a
+struct, the type of the struct, and the pointed-to field within the
+struct, returns a pointer to the beginning of the struct.
+
+The use of call_rcu() permits the caller of foo_update_a() to
+immediately regain control, without needing to worry further about the
+old version of the newly updated element.  It also clearly shows the
+RCU distinction between updater, namely foo_update_a(), and reclaimer,
+namely foo_reclaim().
+
+The summary of advice is the same as for the previous section, except
+that we are now using call_rcu() rather than synchronize_rcu():
+
+-	Use call_rcu() **after** removing a data element from an
+	RCU-protected data structure in order to register a callback
+	function that will be invoked after the completion of all RCU
+	read-side critical sections that might be referencing that
+	data item.
+
+If the callback for call_rcu() is not doing anything more than calling
+kfree() on the structure, you can use kfree_rcu() instead of call_rcu()
+to avoid having to write your own callback::
+
+	kfree_rcu(old_fp, rcu);
+
+Again, see checklist.rst for additional rules governing the use of RCU.
+
+.. _5_whatisRCU:
+
+5.  WHAT ARE SOME SIMPLE IMPLEMENTATIONS OF RCU?
+------------------------------------------------
+
+One of the nice things about RCU is that it has extremely simple "toy"
+implementations that are a good first step towards understanding the
+production-quality implementations in the Linux kernel.  This section
+presents two such "toy" implementations of RCU, one that is implemented
+in terms of familiar locking primitives, and another that more closely
+resembles "classic" RCU.  Both are way too simple for real-world use,
+lacking both functionality and performance.  However, they are useful
+in getting a feel for how RCU works.  See kernel/rcu/update.c for a
+production-quality implementation, and see:
+
+	http://www.rdrop.com/users/paulmck/RCU
+
+for papers describing the Linux kernel RCU implementation.  The OLS'01
+and OLS'02 papers are a good introduction, and the dissertation provides
+more details on the current implementation as of early 2004.
+
+
+5A.  "TOY" IMPLEMENTATION #1: LOCKING
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+This section presents a "toy" RCU implementation that is based on
+familiar locking primitives.  Its overhead makes it a non-starter for
+real-life use, as does its lack of scalability.  It is also unsuitable
+for realtime use, since it allows scheduling latency to "bleed" from
+one read-side critical section to another.  It also assumes recursive
+reader-writer locks:  If you try this with non-recursive locks, and
+you allow nested rcu_read_lock() calls, you can deadlock.
+
+However, it is probably the easiest implementation to relate to, so is
+a good starting point.
+
+It is extremely simple::
+
+	static DEFINE_RWLOCK(rcu_gp_mutex);
+
+	void rcu_read_lock(void)
+	{
+		read_lock(&rcu_gp_mutex);
+	}
+
+	void rcu_read_unlock(void)
+	{
+		read_unlock(&rcu_gp_mutex);
+	}
+
+	void synchronize_rcu(void)
+	{
+		write_lock(&rcu_gp_mutex);
+		smp_mb__after_spinlock();
+		write_unlock(&rcu_gp_mutex);
+	}
+
+[You can ignore rcu_assign_pointer() and rcu_dereference() without missing
+much.  But here are simplified versions anyway.  And whatever you do,
+don't forget about them when submitting patches making use of RCU!]::
+
+	#define rcu_assign_pointer(p, v) \
+	({ \
+		smp_store_release(&(p), (v)); \
+	})
+
+	#define rcu_dereference(p) \
+	({ \
+		typeof(p) _________p1 = READ_ONCE(p); \
+		(_________p1); \
+	})
+
+
+The rcu_read_lock() and rcu_read_unlock() primitive read-acquire
+and release a global reader-writer lock.  The synchronize_rcu()
+primitive write-acquires this same lock, then releases it.  This means
+that once synchronize_rcu() exits, all RCU read-side critical sections
+that were in progress before synchronize_rcu() was called are guaranteed
+to have completed -- there is no way that synchronize_rcu() would have
+been able to write-acquire the lock otherwise.  The smp_mb__after_spinlock()
+promotes synchronize_rcu() to a full memory barrier in compliance with
+the "Memory-Barrier Guarantees" listed in:
+
+	Design/Requirements/Requirements.rst
+
+It is possible to nest rcu_read_lock(), since reader-writer locks may
+be recursively acquired.  Note also that rcu_read_lock() is immune
+from deadlock (an important property of RCU).  The reason for this is
+that the only thing that can block rcu_read_lock() is a synchronize_rcu().
+But synchronize_rcu() does not acquire any locks while holding rcu_gp_mutex,
+so there can be no deadlock cycle.
+
+.. _quiz_1:
+
+Quick Quiz #1:
+		Why is this argument naive?  How could a deadlock
+		occur when using this algorithm in a real-world Linux
+		kernel?  How could this deadlock be avoided?
+
+:ref:`Answers to Quick Quiz <9_whatisRCU>`
+
+5B.  "TOY" EXAMPLE #2: CLASSIC RCU
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+This section presents a "toy" RCU implementation that is based on
+"classic RCU".  It is also short on performance (but only for updates) and
+on features such as hotplug CPU and the ability to run in CONFIG_PREEMPTION
+kernels.  The definitions of rcu_dereference() and rcu_assign_pointer()
+are the same as those shown in the preceding section, so they are omitted.
+::
+
+	void rcu_read_lock(void) { }
+
+	void rcu_read_unlock(void) { }
+
+	void synchronize_rcu(void)
+	{
+		int cpu;
+
+		for_each_possible_cpu(cpu)
+			run_on(cpu);
+	}
+
+Note that rcu_read_lock() and rcu_read_unlock() do absolutely nothing.
+This is the great strength of classic RCU in a non-preemptive kernel:
+read-side overhead is precisely zero, at least on non-Alpha CPUs.
+And there is absolutely no way that rcu_read_lock() can possibly
+participate in a deadlock cycle!
+
+The implementation of synchronize_rcu() simply schedules itself on each
+CPU in turn.  The run_on() primitive can be implemented straightforwardly
+in terms of the sched_setaffinity() primitive.  Of course, a somewhat less
+"toy" implementation would restore the affinity upon completion rather
+than just leaving all tasks running on the last CPU, but when I said
+"toy", I meant **toy**!
+
+So how the heck is this supposed to work???
+
+Remember that it is illegal to block while in an RCU read-side critical
+section.  Therefore, if a given CPU executes a context switch, we know
+that it must have completed all preceding RCU read-side critical sections.
+Once **all** CPUs have executed a context switch, then **all** preceding
+RCU read-side critical sections will have completed.
+
+So, suppose that we remove a data item from its structure and then invoke
+synchronize_rcu().  Once synchronize_rcu() returns, we are guaranteed
+that there are no RCU read-side critical sections holding a reference
+to that data item, so we can safely reclaim it.
+
+.. _quiz_2:
+
+Quick Quiz #2:
+		Give an example where Classic RCU's read-side
+		overhead is **negative**.
+
+:ref:`Answers to Quick Quiz <9_whatisRCU>`
+
+.. _quiz_3:
+
+Quick Quiz #3:
+		If it is illegal to block in an RCU read-side
+		critical section, what the heck do you do in
+		CONFIG_PREEMPT_RT, where normal spinlocks can block???
+
+:ref:`Answers to Quick Quiz <9_whatisRCU>`
+
+.. _6_whatisRCU:
+
+6.  ANALOGY WITH READER-WRITER LOCKING
+--------------------------------------
+
+Although RCU can be used in many different ways, a very common use of
+RCU is analogous to reader-writer locking.  The following unified
+diff shows how closely related RCU and reader-writer locking can be.
+::
+
+	@@ -5,5 +5,5 @@ struct el {
+	 	int data;
+	 	/* Other data fields */
+	 };
+	-rwlock_t listmutex;
+	+spinlock_t listmutex;
+	 struct el head;
+
+	@@ -13,15 +14,15 @@
+		struct list_head *lp;
+		struct el *p;
+
+	-	read_lock(&listmutex);
+	-	list_for_each_entry(p, head, lp) {
+	+	rcu_read_lock();
+	+	list_for_each_entry_rcu(p, head, lp) {
+			if (p->key == key) {
+				*result = p->data;
+	-			read_unlock(&listmutex);
+	+			rcu_read_unlock();
+				return 1;
+			}
+		}
+	-	read_unlock(&listmutex);
+	+	rcu_read_unlock();
+		return 0;
+	 }
+
+	@@ -29,15 +30,16 @@
+	 {
+		struct el *p;
+
+	-	write_lock(&listmutex);
+	+	spin_lock(&listmutex);
+		list_for_each_entry(p, head, lp) {
+			if (p->key == key) {
+	-			list_del(&p->list);
+	-			write_unlock(&listmutex);
+	+			list_del_rcu(&p->list);
+	+			spin_unlock(&listmutex);
+	+			synchronize_rcu();
+				kfree(p);
+				return 1;
+			}
+		}
+	-	write_unlock(&listmutex);
+	+	spin_unlock(&listmutex);
+		return 0;
+	 }
+
+Or, for those who prefer a side-by-side listing::
+
+ 1 struct el {                          1 struct el {
+ 2   struct list_head list;             2   struct list_head list;
+ 3   long key;                          3   long key;
+ 4   spinlock_t mutex;                  4   spinlock_t mutex;
+ 5   int data;                          5   int data;
+ 6   /* Other data fields */            6   /* Other data fields */
+ 7 };                                   7 };
+ 8 rwlock_t listmutex;                  8 spinlock_t listmutex;
+ 9 struct el head;                      9 struct el head;
+
+::
+
+  1 int search(long key, int *result)    1 int search(long key, int *result)
+  2 {                                    2 {
+  3   struct list_head *lp;              3   struct list_head *lp;
+  4   struct el *p;                      4   struct el *p;
+  5                                      5
+  6   read_lock(&listmutex);             6   rcu_read_lock();
+  7   list_for_each_entry(p, head, lp) { 7   list_for_each_entry_rcu(p, head, lp) {
+  8     if (p->key == key) {             8     if (p->key == key) {
+  9       *result = p->data;             9       *result = p->data;
+ 10       read_unlock(&listmutex);      10       rcu_read_unlock();
+ 11       return 1;                     11       return 1;
+ 12     }                               12     }
+ 13   }                                 13   }
+ 14   read_unlock(&listmutex);          14   rcu_read_unlock();
+ 15   return 0;                         15   return 0;
+ 16 }                                   16 }
+
+::
+
+  1 int delete(long key)                 1 int delete(long key)
+  2 {                                    2 {
+  3   struct el *p;                      3   struct el *p;
+  4                                      4
+  5   write_lock(&listmutex);            5   spin_lock(&listmutex);
+  6   list_for_each_entry(p, head, lp) { 6   list_for_each_entry(p, head, lp) {
+  7     if (p->key == key) {             7     if (p->key == key) {
+  8       list_del(&p->list);            8       list_del_rcu(&p->list);
+  9       write_unlock(&listmutex);      9       spin_unlock(&listmutex);
+                                        10       synchronize_rcu();
+ 10       kfree(p);                     11       kfree(p);
+ 11       return 1;                     12       return 1;
+ 12     }                               13     }
+ 13   }                                 14   }
+ 14   write_unlock(&listmutex);         15   spin_unlock(&listmutex);
+ 15   return 0;                         16   return 0;
+ 16 }                                   17 }
+
+Either way, the differences are quite small.  Read-side locking moves
+to rcu_read_lock() and rcu_read_unlock, update-side locking moves from
+a reader-writer lock to a simple spinlock, and a synchronize_rcu()
+precedes the kfree().
+
+However, there is one potential catch: the read-side and update-side
+critical sections can now run concurrently.  In many cases, this will
+not be a problem, but it is necessary to check carefully regardless.
+For example, if multiple independent list updates must be seen as
+a single atomic update, converting to RCU will require special care.
+
+Also, the presence of synchronize_rcu() means that the RCU version of
+delete() can now block.  If this is a problem, there is a callback-based
+mechanism that never blocks, namely call_rcu() or kfree_rcu(), that can
+be used in place of synchronize_rcu().
+
+.. _7_whatisRCU:
+
+7.  ANALOGY WITH REFERENCE COUNTING
+-----------------------------------
+
+The reader-writer analogy (illustrated by the previous section) is not
+always the best way to think about using RCU.  Another helpful analogy
+considers RCU an effective reference count on everything which is
+protected by RCU.
+
+A reference count typically does not prevent the referenced object's
+values from changing, but does prevent changes to type -- particularly the
+gross change of type that happens when that object's memory is freed and
+re-allocated for some other purpose.  Once a type-safe reference to the
+object is obtained, some other mechanism is needed to ensure consistent
+access to the data in the object.  This could involve taking a spinlock,
+but with RCU the typical approach is to perform reads with SMP-aware
+operations such as smp_load_acquire(), to perform updates with atomic
+read-modify-write operations, and to provide the necessary ordering.
+RCU provides a number of support functions that embed the required
+operations and ordering, such as the list_for_each_entry_rcu() macro
+used in the previous section.
+
+A more focused view of the reference counting behavior is that,
+between rcu_read_lock() and rcu_read_unlock(), any reference taken with
+rcu_dereference() on a pointer marked as ``__rcu`` can be treated as
+though a reference-count on that object has been temporarily increased.
+This prevents the object from changing type.  Exactly what this means
+will depend on normal expectations of objects of that type, but it
+typically includes that spinlocks can still be safely locked, normal
+reference counters can be safely manipulated, and ``__rcu`` pointers
+can be safely dereferenced.
+
+Some operations that one might expect to see on an object for
+which an RCU reference is held include:
+
+ - Copying out data that is guaranteed to be stable by the object's type.
+ - Using kref_get_unless_zero() or similar to get a longer-term
+   reference.  This may fail of course.
+ - Acquiring a spinlock in the object, and checking if the object still
+   is the expected object and if so, manipulating it freely.
+
+The understanding that RCU provides a reference that only prevents a
+change of type is particularly visible with objects allocated from a
+slab cache marked ``SLAB_TYPESAFE_BY_RCU``.  RCU operations may yield a
+reference to an object from such a cache that has been concurrently freed
+and the memory reallocated to a completely different object, though of
+the same type.  In this case RCU doesn't even protect the identity of the
+object from changing, only its type.  So the object found may not be the
+one expected, but it will be one where it is safe to take a reference
+(and then potentially acquiring a spinlock), allowing subsequent code
+to check whether the identity matches expectations.  It is tempting
+to simply acquire the spinlock without first taking the reference, but
+unfortunately any spinlock in a ``SLAB_TYPESAFE_BY_RCU`` object must be
+initialized after each and every call to kmem_cache_alloc(), which renders
+reference-free spinlock acquisition completely unsafe.  Therefore, when
+using ``SLAB_TYPESAFE_BY_RCU``, make proper use of a reference counter.
+
+With traditional reference counting -- such as that implemented by the
+kref library in Linux -- there is typically code that runs when the last
+reference to an object is dropped.  With kref, this is the function
+passed to kref_put().  When RCU is being used, such finalization code
+must not be run until all ``__rcu`` pointers referencing the object have
+been updated, and then a grace period has passed.  Every remaining
+globally visible pointer to the object must be considered to be a
+potential counted reference, and the finalization code is typically run
+using call_rcu() only after all those pointers have been changed.
+
+To see how to choose between these two analogies -- of RCU as a
+reader-writer lock and RCU as a reference counting system -- it is useful
+to reflect on the scale of the thing being protected.  The reader-writer
+lock analogy looks at larger multi-part objects such as a linked list
+and shows how RCU can facilitate concurrency while elements are added
+to, and removed from, the list.  The reference-count analogy looks at
+the individual objects and looks at how they can be accessed safely
+within whatever whole they are a part of.
+
+.. _8_whatisRCU:
+
+8.  FULL LIST OF RCU APIs
+-------------------------
+
+The RCU APIs are documented in docbook-format header comments in the
+Linux-kernel source code, but it helps to have a full list of the
+APIs, since there does not appear to be a way to categorize them
+in docbook.  Here is the list, by category.
+
+RCU list traversal::
+
+	list_entry_rcu
+	list_entry_lockless
+	list_first_entry_rcu
+	list_next_rcu
+	list_for_each_entry_rcu
+	list_for_each_entry_continue_rcu
+	list_for_each_entry_from_rcu
+	list_first_or_null_rcu
+	list_next_or_null_rcu
+	hlist_first_rcu
+	hlist_next_rcu
+	hlist_pprev_rcu
+	hlist_for_each_entry_rcu
+	hlist_for_each_entry_rcu_bh
+	hlist_for_each_entry_from_rcu
+	hlist_for_each_entry_continue_rcu
+	hlist_for_each_entry_continue_rcu_bh
+	hlist_nulls_first_rcu
+	hlist_nulls_for_each_entry_rcu
+	hlist_bl_first_rcu
+	hlist_bl_for_each_entry_rcu
+
+RCU pointer/list update::
+
+	rcu_assign_pointer
+	list_add_rcu
+	list_add_tail_rcu
+	list_del_rcu
+	list_replace_rcu
+	hlist_add_behind_rcu
+	hlist_add_before_rcu
+	hlist_add_head_rcu
+	hlist_add_tail_rcu
+	hlist_del_rcu
+	hlist_del_init_rcu
+	hlist_replace_rcu
+	list_splice_init_rcu
+	list_splice_tail_init_rcu
+	hlist_nulls_del_init_rcu
+	hlist_nulls_del_rcu
+	hlist_nulls_add_head_rcu
+	hlist_bl_add_head_rcu
+	hlist_bl_del_init_rcu
+	hlist_bl_del_rcu
+	hlist_bl_set_first_rcu
+
+RCU::
+
+	Critical sections	Grace period		Barrier
+
+	rcu_read_lock		synchronize_net		rcu_barrier
+	rcu_read_unlock		synchronize_rcu
+	rcu_dereference		synchronize_rcu_expedited
+	rcu_read_lock_held	call_rcu
+	rcu_dereference_check	kfree_rcu
+	rcu_dereference_protected
+
+bh::
+
+	Critical sections	Grace period		Barrier
+
+	rcu_read_lock_bh	call_rcu		rcu_barrier
+	rcu_read_unlock_bh	synchronize_rcu
+	[local_bh_disable]	synchronize_rcu_expedited
+	[and friends]
+	rcu_dereference_bh
+	rcu_dereference_bh_check
+	rcu_dereference_bh_protected
+	rcu_read_lock_bh_held
+
+sched::
+
+	Critical sections	Grace period		Barrier
+
+	rcu_read_lock_sched	call_rcu		rcu_barrier
+	rcu_read_unlock_sched	synchronize_rcu
+	[preempt_disable]	synchronize_rcu_expedited
+	[and friends]
+	rcu_read_lock_sched_notrace
+	rcu_read_unlock_sched_notrace
+	rcu_dereference_sched
+	rcu_dereference_sched_check
+	rcu_dereference_sched_protected
+	rcu_read_lock_sched_held
+
+
+SRCU::
+
+	Critical sections	Grace period		Barrier
+
+	srcu_read_lock		call_srcu		srcu_barrier
+	srcu_read_unlock	synchronize_srcu
+	srcu_dereference	synchronize_srcu_expedited
+	srcu_dereference_check
+	srcu_read_lock_held
+
+SRCU: Initialization/cleanup::
+
+	DEFINE_SRCU
+	DEFINE_STATIC_SRCU
+	init_srcu_struct
+	cleanup_srcu_struct
+
+All: lockdep-checked RCU utility APIs::
+
+	RCU_LOCKDEP_WARN
+	rcu_sleep_check
+	RCU_NONIDLE
+
+All: Unchecked RCU-protected pointer access::
+
+	rcu_dereference_raw
+
+All: Unchecked RCU-protected pointer access with dereferencing prohibited::
+
+	rcu_access_pointer
+
+See the comment headers in the source code (or the docbook generated
+from them) for more information.
+
+However, given that there are no fewer than four families of RCU APIs
+in the Linux kernel, how do you choose which one to use?  The following
+list can be helpful:
+
+a.	Will readers need to block?  If so, you need SRCU.
+
+b.	What about the -rt patchset?  If readers would need to block
+	in an non-rt kernel, you need SRCU.  If readers would block
+	in a -rt kernel, but not in a non-rt kernel, SRCU is not
+	necessary.  (The -rt patchset turns spinlocks into sleeplocks,
+	hence this distinction.)
+
+c.	Do you need to treat NMI handlers, hardirq handlers,
+	and code segments with preemption disabled (whether
+	via preempt_disable(), local_irq_save(), local_bh_disable(),
+	or some other mechanism) as if they were explicit RCU readers?
+	If so, RCU-sched is the only choice that will work for you.
+
+d.	Do you need RCU grace periods to complete even in the face
+	of softirq monopolization of one or more of the CPUs?  For
+	example, is your code subject to network-based denial-of-service
+	attacks?  If so, you should disable softirq across your readers,
+	for example, by using rcu_read_lock_bh().
+
+e.	Is your workload too update-intensive for normal use of
+	RCU, but inappropriate for other synchronization mechanisms?
+	If so, consider SLAB_TYPESAFE_BY_RCU (which was originally
+	named SLAB_DESTROY_BY_RCU).  But please be careful!
+
+f.	Do you need read-side critical sections that are respected
+	even though they are in the middle of the idle loop, during
+	user-mode execution, or on an offlined CPU?  If so, SRCU is the
+	only choice that will work for you.
+
+g.	Otherwise, use RCU.
+
+Of course, this all assumes that you have determined that RCU is in fact
+the right tool for your job.
+
+.. _9_whatisRCU:
+
+9.  ANSWERS TO QUICK QUIZZES
+----------------------------
+
+Quick Quiz #1:
+		Why is this argument naive?  How could a deadlock
+		occur when using this algorithm in a real-world Linux
+		kernel?  [Referring to the lock-based "toy" RCU
+		algorithm.]
+
+Answer:
+		Consider the following sequence of events:
+
+		1.	CPU 0 acquires some unrelated lock, call it
+			"problematic_lock", disabling irq via
+			spin_lock_irqsave().
+
+		2.	CPU 1 enters synchronize_rcu(), write-acquiring
+			rcu_gp_mutex.
+
+		3.	CPU 0 enters rcu_read_lock(), but must wait
+			because CPU 1 holds rcu_gp_mutex.
+
+		4.	CPU 1 is interrupted, and the irq handler
+			attempts to acquire problematic_lock.
+
+		The system is now deadlocked.
+
+		One way to avoid this deadlock is to use an approach like
+		that of CONFIG_PREEMPT_RT, where all normal spinlocks
+		become blocking locks, and all irq handlers execute in
+		the context of special tasks.  In this case, in step 4
+		above, the irq handler would block, allowing CPU 1 to
+		release rcu_gp_mutex, avoiding the deadlock.
+
+		Even in the absence of deadlock, this RCU implementation
+		allows latency to "bleed" from readers to other
+		readers through synchronize_rcu().  To see this,
+		consider task A in an RCU read-side critical section
+		(thus read-holding rcu_gp_mutex), task B blocked
+		attempting to write-acquire rcu_gp_mutex, and
+		task C blocked in rcu_read_lock() attempting to
+		read_acquire rcu_gp_mutex.  Task A's RCU read-side
+		latency is holding up task C, albeit indirectly via
+		task B.
+
+		Realtime RCU implementations therefore use a counter-based
+		approach where tasks in RCU read-side critical sections
+		cannot be blocked by tasks executing synchronize_rcu().
+
+:ref:`Back to Quick Quiz #1 <quiz_1>`
+
+Quick Quiz #2:
+		Give an example where Classic RCU's read-side
+		overhead is **negative**.
+
+Answer:
+		Imagine a single-CPU system with a non-CONFIG_PREEMPTION
+		kernel where a routing table is used by process-context
+		code, but can be updated by irq-context code (for example,
+		by an "ICMP REDIRECT" packet).	The usual way of handling
+		this would be to have the process-context code disable
+		interrupts while searching the routing table.  Use of
+		RCU allows such interrupt-disabling to be dispensed with.
+		Thus, without RCU, you pay the cost of disabling interrupts,
+		and with RCU you don't.
+
+		One can argue that the overhead of RCU in this
+		case is negative with respect to the single-CPU
+		interrupt-disabling approach.  Others might argue that
+		the overhead of RCU is merely zero, and that replacing
+		the positive overhead of the interrupt-disabling scheme
+		with the zero-overhead RCU scheme does not constitute
+		negative overhead.
+
+		In real life, of course, things are more complex.  But
+		even the theoretical possibility of negative overhead for
+		a synchronization primitive is a bit unexpected.  ;-)
+
+:ref:`Back to Quick Quiz #2 <quiz_2>`
+
+Quick Quiz #3:
+		If it is illegal to block in an RCU read-side
+		critical section, what the heck do you do in
+		CONFIG_PREEMPT_RT, where normal spinlocks can block???
+
+Answer:
+		Just as CONFIG_PREEMPT_RT permits preemption of spinlock
+		critical sections, it permits preemption of RCU
+		read-side critical sections.  It also permits
+		spinlocks blocking while in RCU read-side critical
+		sections.
+
+		Why the apparent inconsistency?  Because it is
+		possible to use priority boosting to keep the RCU
+		grace periods short if need be (for example, if running
+		short of memory).  In contrast, if blocking waiting
+		for (say) network reception, there is no way to know
+		what should be boosted.  Especially given that the
+		process we need to boost might well be a human being
+		who just went out for a pizza or something.  And although
+		a computer-operated cattle prod might arouse serious
+		interest, it might also provoke serious objections.
+		Besides, how does the computer know what pizza parlor
+		the human being went to???
+
+:ref:`Back to Quick Quiz #3 <quiz_3>`
+
+ACKNOWLEDGEMENTS
+
+My thanks to the people who helped make this human-readable, including
+Jon Walpole, Josh Triplett, Serge Hallyn, Suzanne Wood, and Alan Stern.
+
+
+For more information, see http://www.rdrop.com/users/paulmck/RCU.