Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

3 files changed, 298 insertions, 0 deletions

diff --git a/Documentation/filesystems/cifs/cifsroot.rst b/Documentation/filesystems/cifs/cifsroot.rst
new file mode 100644
index 000000000..4930bb443
--- /dev/null
+++ b/Documentation/filesystems/cifs/cifsroot.rst
@@ -0,0 +1,105 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===========================================
+Mounting root file system via SMB (cifs.ko)
+===========================================
+
+Written 2019 by Paulo Alcantara <palcantara@suse.de>
+
+Written 2019 by Aurelien Aptel <aaptel@suse.com>
+
+The CONFIG_CIFS_ROOT option enables experimental root file system
+support over the SMB protocol via cifs.ko.
+
+It introduces a new kernel command-line option called 'cifsroot='
+which will tell the kernel to mount the root file system over the
+network by utilizing SMB or CIFS protocol.
+
+In order to mount, the network stack will also need to be set up by
+using 'ip=' config option. For more details, see
+Documentation/admin-guide/nfs/nfsroot.rst.
+
+A CIFS root mount currently requires the use of SMB1+UNIX Extensions
+which is only supported by the Samba server. SMB1 is the older
+deprecated version of the protocol but it has been extended to support
+POSIX features (See [1]). The equivalent extensions for the newer
+recommended version of the protocol (SMB3) have not been fully
+implemented yet which means SMB3 doesn't support some required POSIX
+file system objects (e.g. block devices, pipes, sockets).
+
+As a result, a CIFS root will default to SMB1 for now but the version
+to use can nonetheless be changed via the 'vers=' mount option.  This
+default will change once the SMB3 POSIX extensions are fully
+implemented.
+
+Server configuration
+====================
+
+To enable SMB1+UNIX extensions you will need to set these global
+settings in Samba smb.conf::
+
+    [global]
+    server min protocol = NT1
+    unix extension = yes        # default
+
+Kernel command line
+===================
+
+::
+
+    root=/dev/cifs
+
+This is just a virtual device that basically tells the kernel to mount
+the root file system via SMB protocol.
+
+::
+
+    cifsroot=//<server-ip>/<share>[,options]
+
+Enables the kernel to mount the root file system via SMB that are
+located in the <server-ip> and <share> specified in this option.
+
+The default mount options are set in fs/cifs/cifsroot.c.
+
+server-ip
+	IPv4 address of the server.
+
+share
+	Path to SMB share (rootfs).
+
+options
+	Optional mount options. For more information, see mount.cifs(8).
+
+Examples
+========
+
+Export root file system as a Samba share in smb.conf file::
+
+    ...
+    [linux]
+	    path = /path/to/rootfs
+	    read only = no
+	    guest ok = yes
+	    force user = root
+	    force group = root
+	    browseable = yes
+	    writeable = yes
+	    admin users = root
+	    public = yes
+	    create mask = 0777
+	    directory mask = 0777
+    ...
+
+Restart smb service::
+
+    # systemctl restart smb
+
+Test it under QEMU on a kernel built with CONFIG_CIFS_ROOT and
+CONFIG_IP_PNP options enabled::
+
+    # qemu-system-x86_64 -enable-kvm -cpu host -m 1024 \
+    -kernel /path/to/linux/arch/x86/boot/bzImage -nographic \
+    -append "root=/dev/cifs rw ip=dhcp cifsroot=//10.0.2.2/linux,username=foo,password=bar console=ttyS0 3"
+
+
+1: https://wiki.samba.org/index.php/UNIX_Extensions
diff --git a/Documentation/filesystems/cifs/index.rst b/Documentation/filesystems/cifs/index.rst
new file mode 100644
index 000000000..1c8597a67
--- /dev/null
+++ b/Documentation/filesystems/cifs/index.rst
@@ -0,0 +1,10 @@
+===============================
+CIFS
+===============================
+
+
+.. toctree::
+   :maxdepth: 1
+
+   ksmbd
+   cifsroot
diff --git a/Documentation/filesystems/cifs/ksmbd.rst b/Documentation/filesystems/cifs/ksmbd.rst
new file mode 100644
index 000000000..7bed96d79
--- /dev/null
+++ b/Documentation/filesystems/cifs/ksmbd.rst
@@ -0,0 +1,183 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+==========================
+KSMBD - SMB3 Kernel Server
+==========================
+
+KSMBD is a linux kernel server which implements SMB3 protocol in kernel space
+for sharing files over network.
+
+KSMBD architecture
+==================
+
+The subset of performance related operations belong in kernelspace and
+the other subset which belong to operations which are not really related with
+performance in userspace. So, DCE/RPC management that has historically resulted
+into number of buffer overflow issues and dangerous security bugs and user
+account management are implemented in user space as ksmbd.mountd.
+File operations that are related with performance (open/read/write/close etc.)
+in kernel space (ksmbd). This also allows for easier integration with VFS
+interface for all file operations.
+
+ksmbd (kernel daemon)
+---------------------
+
+When the server daemon is started, It starts up a forker thread
+(ksmbd/interface name) at initialization time and open a dedicated port 445
+for listening to SMB requests. Whenever new clients make request, Forker
+thread will accept the client connection and fork a new thread for dedicated
+communication channel between the client and the server. It allows for parallel
+processing of SMB requests(commands) from clients as well as allowing for new
+clients to make new connections. Each instance is named ksmbd/1~n(port number)
+to indicate connected clients. Depending on the SMB request types, each new
+thread can decide to pass through the commands to the user space (ksmbd.mountd),
+currently DCE/RPC commands are identified to be handled through the user space.
+To further utilize the linux kernel, it has been chosen to process the commands
+as workitems and to be executed in the handlers of the ksmbd-io kworker threads.
+It allows for multiplexing of the handlers as the kernel take care of initiating
+extra worker threads if the load is increased and vice versa, if the load is
+decreased it destroys the extra worker threads. So, after connection is
+established with client. Dedicated ksmbd/1..n(port number) takes complete
+ownership of receiving/parsing of SMB commands. Each received command is worked
+in parallel i.e., There can be multiple clients commands which are worked in
+parallel. After receiving each command a separated kernel workitem is prepared
+for each command which is further queued to be handled by ksmbd-io kworkers.
+So, each SMB workitem is queued to the kworkers. This allows the benefit of load
+sharing to be managed optimally by the default kernel and optimizing client
+performance by handling client commands in parallel.
+
+ksmbd.mountd (user space daemon)
+--------------------------------
+
+ksmbd.mountd is userspace process to, transfer user account and password that
+are registered using ksmbd.adduser (part of utils for user space). Further it
+allows sharing information parameters that parsed from smb.conf to ksmbd in
+kernel. For the execution part it has a daemon which is continuously running
+and connected to the kernel interface using netlink socket, it waits for the
+requests (dcerpc and share/user info). It handles RPC calls (at a minimum few
+dozen) that are most important for file server from NetShareEnum and
+NetServerGetInfo. Complete DCE/RPC response is prepared from the user space
+and passed over to the associated kernel thread for the client.
+
+
+KSMBD Feature Status
+====================
+
+============================== =================================================
+Feature name                   Status
+============================== =================================================
+Dialects                       Supported. SMB2.1 SMB3.0, SMB3.1.1 dialects
+                               (intentionally excludes security vulnerable SMB1
+                               dialect).
+Auto Negotiation               Supported.
+Compound Request               Supported.
+Oplock Cache Mechanism         Supported.
+SMB2 leases(v1 lease)          Supported.
+Directory leases(v2 lease)     Planned for future.
+Multi-credits                  Supported.
+NTLM/NTLMv2                    Supported.
+HMAC-SHA256 Signing            Supported.
+Secure negotiate               Supported.
+Signing Update                 Supported.
+Pre-authentication integrity   Supported.
+SMB3 encryption(CCM, GCM)      Supported. (CCM and GCM128 supported, GCM256 in
+                               progress)
+SMB direct(RDMA)               Supported.
+SMB3 Multi-channel             Partially Supported. Planned to implement
+                               replay/retry mechanisms for future.
+Receive Side Scaling mode      Supported.
+SMB3.1.1 POSIX extension       Supported.
+ACLs                           Partially Supported. only DACLs available, SACLs
+                               (auditing) is planned for the future. For
+                               ownership (SIDs) ksmbd generates random subauth
+                               values(then store it to disk) and use uid/gid
+                               get from inode as RID for local domain SID.
+                               The current acl implementation is limited to
+                               standalone server, not a domain member.
+                               Integration with Samba tools is being worked on
+                               to allow future support for running as a domain
+                               member.
+Kerberos                       Supported.
+Durable handle v1,v2           Planned for future.
+Persistent handle              Planned for future.
+SMB2 notify                    Planned for future.
+Sparse file support            Supported.
+DCE/RPC support                Partially Supported. a few calls(NetShareEnumAll,
+                               NetServerGetInfo, SAMR, LSARPC) that are needed
+                               for file server handled via netlink interface
+                               from ksmbd.mountd. Additional integration with
+                               Samba tools and libraries via upcall is being
+                               investigated to allow support for additional
+                               DCE/RPC management calls (and future support
+                               for Witness protocol e.g.)
+ksmbd/nfsd interoperability    Planned for future. The features that ksmbd
+                               support are Leases, Notify, ACLs and Share modes.
+============================== =================================================
+
+
+How to run
+==========
+
+1. Download ksmbd-tools(https://github.com/cifsd-team/ksmbd-tools/releases) and
+   compile them.
+
+   - Refer README(https://github.com/cifsd-team/ksmbd-tools/blob/master/README.md)
+     to know how to use ksmbd.mountd/adduser/addshare/control utils
+
+     $ ./autogen.sh
+     $ ./configure --with-rundir=/run
+     $ make && sudo make install
+
+2. Create /usr/local/etc/ksmbd/ksmbd.conf file, add SMB share in ksmbd.conf file.
+
+   - Refer ksmbd.conf.example in ksmbd-utils, See ksmbd.conf manpage
+     for details to configure shares.
+
+        $ man ksmbd.conf
+
+3. Create user/password for SMB share.
+
+   - See ksmbd.adduser manpage.
+
+     $ man ksmbd.adduser
+     $ sudo ksmbd.adduser -a <Enter USERNAME for SMB share access>
+
+4. Insert ksmbd.ko module after build your kernel. No need to load module
+   if ksmbd is built into the kernel.
+
+   - Set ksmbd in menuconfig(e.g. $ make menuconfig)
+       [*] Network File Systems  --->
+           <M> SMB3 server support (EXPERIMENTAL)
+
+	$ sudo modprobe ksmbd.ko
+
+5. Start ksmbd user space daemon
+
+	$ sudo ksmbd.mountd
+
+6. Access share from Windows or Linux using SMB3 client (cifs.ko or smbclient of samba)
+
+Shutdown KSMBD
+==============
+
+1. kill user and kernel space daemon
+	# sudo ksmbd.control -s
+
+How to turn debug print on
+==========================
+
+Each layer
+/sys/class/ksmbd-control/debug
+
+1. Enable all component prints
+	# sudo ksmbd.control -d "all"
+
+2. Enable one of components (smb, auth, vfs, oplock, ipc, conn, rdma)
+	# sudo ksmbd.control -d "smb"
+
+3. Show what prints are enabled.
+	# cat /sys/class/ksmbd-control/debug
+	  [smb] auth vfs oplock ipc conn [rdma]
+
+4. Disable prints:
+	If you try the selected component once more, It is disabled without brackets.