Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 676 insertions, 0 deletions

diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
new file mode 100644
index 000000000..d95d82abd
--- /dev/null
+++ b/arch/alpha/Kconfig
@@ -0,0 +1,676 @@
+# SPDX-License-Identifier: GPL-2.0
+config ALPHA
+	bool
+	default y
+	select ARCH_32BIT_USTAT_F_TINODE
+	select ARCH_MIGHT_HAVE_PC_PARPORT
+	select ARCH_MIGHT_HAVE_PC_SERIO
+	select ARCH_NO_PREEMPT
+	select ARCH_NO_SG_CHAIN
+	select ARCH_USE_CMPXCHG_LOCKREF
+	select DMA_OPS if PCI
+	select FORCE_PCI if !ALPHA_JENSEN
+	select PCI_DOMAINS if PCI
+	select PCI_SYSCALL if PCI
+	select HAVE_ASM_MODVERSIONS
+	select HAVE_PCSPKR_PLATFORM
+	select HAVE_PERF_EVENTS
+	select NEED_DMA_MAP_STATE
+	select NEED_SG_DMA_LENGTH
+	select GENERIC_IRQ_PROBE
+	select GENERIC_PCI_IOMAP
+	select AUTO_IRQ_AFFINITY if SMP
+	select GENERIC_IRQ_SHOW
+	select ARCH_WANT_IPC_PARSE_VERSION
+	select ARCH_HAVE_NMI_SAFE_CMPXCHG
+	select AUDIT_ARCH
+	select GENERIC_CPU_VULNERABILITIES
+	select GENERIC_SMP_IDLE_THREAD
+	select HAVE_ARCH_AUDITSYSCALL
+	select HAVE_MOD_ARCH_SPECIFIC
+	select LOCK_MM_AND_FIND_VMA
+	select MODULES_USE_ELF_RELA
+	select ODD_RT_SIGACTION
+	select OLD_SIGSUSPEND
+	select CPU_NO_EFFICIENT_FFS if !ALPHA_EV67
+	select MMU_GATHER_NO_RANGE
+	select SPARSEMEM_EXTREME if SPARSEMEM
+	select ZONE_DMA
+	help
+	  The Alpha is a 64-bit general-purpose processor designed and
+	  marketed by the Digital Equipment Corporation of blessed memory,
+	  now Hewlett-Packard.  The Alpha Linux project has a home page at
+	  <http://www.alphalinux.org/>.
+
+config 64BIT
+	def_bool y
+
+config MMU
+	bool
+	default y
+
+config ARCH_HAS_ILOG2_U32
+	bool
+	default n
+
+config ARCH_HAS_ILOG2_U64
+	bool
+	default n
+
+config GENERIC_CALIBRATE_DELAY
+	bool
+	default y
+
+config GENERIC_ISA_DMA
+	bool
+	default y
+
+config PGTABLE_LEVELS
+	int
+	default 3
+
+config AUDIT_ARCH
+	bool
+
+menu "System setup"
+
+choice
+	prompt "Alpha system type"
+	default ALPHA_GENERIC
+	help
+	  This is the system type of your hardware.  A "generic" kernel will
+	  run on any supported Alpha system. However, if you configure a
+	  kernel for your specific system, it will be faster and smaller.
+
+	  To find out what type of Alpha system you have, you may want to
+	  check out the Linux/Alpha FAQ, accessible on the WWW from
+	  <http://www.alphalinux.org/>. In summary:
+
+	  Alcor/Alpha-XLT     AS 600, AS 500, XL-300, XL-366
+	  Alpha-XL            XL-233, XL-266
+	  AlphaBook1          Alpha laptop
+	  Avanti              AS 200, AS 205, AS 250, AS 255, AS 300, AS 400
+	  Cabriolet           AlphaPC64, AlphaPCI64
+	  DP264               DP264 / DS20 / ES40 / DS10 / DS10L
+	  EB164               EB164 21164 evaluation board
+	  EB64+               EB64+ 21064 evaluation board
+	  EB66                EB66 21066 evaluation board
+	  EB66+               EB66+ 21066 evaluation board
+	  Jensen              DECpc 150, DEC 2000 models 300, 500
+	  LX164               AlphaPC164-LX
+	  Lynx                AS 2100A
+	  Miata               Personal Workstation 433/500/600 a/au
+	  Marvel              AlphaServer ES47 / ES80 / GS1280
+	  Mikasa              AS 1000
+	  Noname              AXPpci33, UDB (Multia)
+	  Noritake            AS 1000A, AS 600A, AS 800
+	  PC164               AlphaPC164
+	  Rawhide             AS 1200, AS 4000, AS 4100
+	  Ruffian             RPX164-2, AlphaPC164-UX, AlphaPC164-BX
+	  SX164               AlphaPC164-SX
+	  Sable               AS 2000, AS 2100
+	  Shark               DS 20L
+	  Takara              Takara (OEM)
+	  Titan               AlphaServer ES45 / DS25 / DS15
+	  Wildfire            AlphaServer GS 40/80/160/320
+
+	  If you don't know what to do, choose "generic".
+
+config ALPHA_GENERIC
+	bool "Generic"
+	depends on TTY
+	select HAVE_EISA
+	help
+	  A generic kernel will run on all supported Alpha hardware.
+
+config ALPHA_ALCOR
+	bool "Alcor/Alpha-XLT"
+	select HAVE_EISA
+	help
+	  For systems using the Digital ALCOR chipset: 5 chips (4, 64-bit data
+	  slices (Data Switch, DSW) - 208-pin PQFP and 1 control (Control, I/O
+	  Address, CIA) - a 383 pin plastic PGA).  It provides a DRAM
+	  controller (256-bit memory bus) and a PCI interface.  It also does
+	  all the work required to support an external Bcache and to maintain
+	  memory coherence when a PCI device DMAs into (or out of) memory.
+
+config ALPHA_XL
+	bool "Alpha-XL"
+	help
+	  XL-233 and XL-266-based Alpha systems.
+
+config ALPHA_BOOK1
+	bool "AlphaBook1"
+	help
+	  Dec AlphaBook1/Burns Alpha-based laptops.
+
+config ALPHA_AVANTI_CH
+	bool "Avanti"
+
+config ALPHA_CABRIOLET
+	bool "Cabriolet"
+	help
+	  Cabriolet AlphaPC64, AlphaPCI64 systems.  Derived from EB64+ but now
+	  baby-AT with Flash boot ROM, no on-board SCSI or Ethernet. 3 ISA
+	  slots, 4 PCI slots (one pair are on a shared slot), uses plug-in
+	  Bcache SIMMs.  Requires power supply with 3.3V output.
+
+config ALPHA_DP264
+	bool "DP264"
+	help
+	  Various 21264 systems with the tsunami core logic chipset.
+	  API Networks: 264DP, UP2000(+), CS20;
+	  Compaq: DS10(E,L), XP900, XP1000, DS20(E), ES40.
+
+config ALPHA_EB164
+	bool "EB164"
+	help
+	  EB164 21164 evaluation board from DEC.  Uses 21164 and ALCOR.  Has
+	  ISA and PCI expansion (3 ISA slots, 2 64-bit PCI slots (one is
+	  shared with an ISA slot) and 2 32-bit PCI slots.  Uses plus-in
+	  Bcache SIMMs. I/O sub-system provides SuperI/O (2S, 1P, FD), KBD,
+	  MOUSE (PS2 style), RTC/NVRAM.  Boot ROM is Flash.  PC-AT-sized
+	  motherboard.  Requires power supply with 3.3V output.
+
+config ALPHA_EB64P_CH
+	bool "EB64+"
+
+config ALPHA_EB66
+	bool "EB66"
+	help
+	  A Digital DS group board.  Uses 21066 or 21066A.  I/O sub-system is
+	  identical to EB64+.  Baby PC-AT size.  Runs from standard PC power
+	  supply.  The EB66 schematic was published as a marketing poster
+	  advertising the 21066 as "the first microprocessor in the world with
+	  embedded PCI".
+
+config ALPHA_EB66P
+	bool "EB66+"
+	help
+	  Later variant of the EB66 board.
+
+config ALPHA_EIGER
+	bool "Eiger"
+	help
+	  Apparently an obscure OEM single-board computer based on the
+	  Typhoon/Tsunami chipset family. Information on it is scanty.
+
+config ALPHA_JENSEN
+	bool "Jensen"
+	select HAVE_EISA
+	help
+	  DEC PC 150 AXP (aka Jensen): This is a very old Digital system - one
+	  of the first-generation Alpha systems. A number of these systems
+	  seem to be available on the second- hand market. The Jensen is a
+	  floor-standing tower system which originally used a 150MHz 21064 It
+	  used programmable logic to interface a 486 EISA I/O bridge to the
+	  CPU.
+
+config ALPHA_LX164
+	bool "LX164"
+	help
+	  A technical overview of this board is available at
+	  <http://www.unix-ag.org/Linux-Alpha/Architectures/LX164.html>.
+
+config ALPHA_LYNX
+	bool "Lynx"
+	select HAVE_EISA
+	help
+	  AlphaServer 2100A-based systems.
+
+config ALPHA_MARVEL
+	bool "Marvel"
+	help
+	  AlphaServer ES47 / ES80 / GS1280 based on EV7.
+
+config ALPHA_MIATA
+	bool "Miata"
+	select HAVE_EISA
+	help
+	  The Digital PersonalWorkStation (PWS 433a, 433au, 500a, 500au, 600a,
+	  or 600au).
+
+config ALPHA_MIKASA
+	bool "Mikasa"
+	help
+	  AlphaServer 1000-based Alpha systems.
+
+config ALPHA_NAUTILUS
+	bool "Nautilus"
+	help
+	  Alpha systems based on the AMD 751 & ALI 1543C chipsets.
+
+config ALPHA_NONAME_CH
+	bool "Noname"
+
+config ALPHA_NORITAKE
+	bool "Noritake"
+	select HAVE_EISA
+	help
+	  AlphaServer 1000A, AlphaServer 600A, and AlphaServer 800-based
+	  systems.
+
+config ALPHA_PC164
+	bool "PC164"
+
+config ALPHA_P2K
+	bool "Platform2000"
+
+config ALPHA_RAWHIDE
+	bool "Rawhide"
+	select HAVE_EISA
+	help
+	  AlphaServer 1200, AlphaServer 4000 and AlphaServer 4100 machines.
+	  See HOWTO at
+	  <http://www.alphalinux.org/docs/rawhide/4100_install.shtml>.
+
+config ALPHA_RUFFIAN
+	bool "Ruffian"
+	help
+	  Samsung APC164UX.  There is a page on known problems and workarounds
+	  at <http://www.alphalinux.org/faq/FAQ-11.html>.
+
+config ALPHA_RX164
+	bool "RX164"
+
+config ALPHA_SX164
+	bool "SX164"
+
+config ALPHA_SABLE
+	bool "Sable"
+	select HAVE_EISA
+	help
+	  Digital AlphaServer 2000 and 2100-based systems.
+
+config ALPHA_SHARK
+	bool "Shark"
+
+config ALPHA_TAKARA
+	bool "Takara"
+	help
+	  Alpha 11164-based OEM single-board computer.
+
+config ALPHA_TITAN
+	bool "Titan"
+	help
+	  AlphaServer ES45/DS25 SMP based on EV68 and Titan chipset.
+
+config ALPHA_WILDFIRE
+	bool "Wildfire"
+	help
+	  AlphaServer GS 40/80/160/320 SMP based on the EV67 core.
+
+endchoice
+
+# clear all implied options (don't want default values for those):
+# Most of these machines have ISA slots; not exactly sure which don't,
+# and this doesn't activate hordes of code, so do it always.
+config ISA
+	bool
+	default y
+	help
+	  Find out whether you have ISA slots on your motherboard.  ISA is the
+	  name of a bus system, i.e. the way the CPU talks to the other stuff
+	  inside your box.  Other bus systems are PCI, EISA, MicroChannel
+	  (MCA) or VESA.  ISA is an older system, now being displaced by PCI;
+	  newer boards don't support it.  If you have ISA, say Y, otherwise N.
+
+config ISA_DMA_API
+	bool
+	default y
+
+config ALPHA_NONAME
+	bool
+	depends on ALPHA_BOOK1 || ALPHA_NONAME_CH
+	default y
+	help
+	  The AXPpci33 (aka NoName), is based on the EB66 (includes the Multia
+	  UDB).  This design was produced by Digital's Technical OEM (TOEM)
+	  group. It uses the 21066 processor running at 166MHz or 233MHz. It
+	  is a baby-AT size, and runs from a standard PC power supply. It has
+	  5 ISA slots and 3 PCI slots (one pair are a shared slot). There are
+	  2 versions, with either PS/2 or large DIN connectors for the
+	  keyboard.
+
+config ALPHA_EV4
+	bool
+	depends on ALPHA_JENSEN || (ALPHA_SABLE && !ALPHA_GAMMA) || ALPHA_LYNX || ALPHA_NORITAKE && !ALPHA_PRIMO || ALPHA_MIKASA && !ALPHA_PRIMO || ALPHA_CABRIOLET || ALPHA_AVANTI_CH || ALPHA_EB64P_CH || ALPHA_XL || ALPHA_NONAME || ALPHA_EB66 || ALPHA_EB66P || ALPHA_P2K
+	default y if !ALPHA_LYNX
+
+config ALPHA_LCA
+	bool
+	depends on ALPHA_NONAME || ALPHA_EB66 || ALPHA_EB66P || ALPHA_P2K
+	default y
+
+config ALPHA_APECS
+	bool
+	depends on !ALPHA_PRIMO && (ALPHA_NORITAKE || ALPHA_MIKASA) || ALPHA_CABRIOLET || ALPHA_AVANTI_CH || ALPHA_EB64P_CH || ALPHA_XL
+	default y
+
+config ALPHA_EB64P
+	bool
+	depends on ALPHA_CABRIOLET || ALPHA_EB64P_CH
+	default y
+	help
+	  Uses 21064 or 21064A and APECs.  Has ISA and PCI expansion (3 ISA,
+	  2 PCI, one pair are on a shared slot). Supports 36-bit DRAM SIMs.
+	  ISA bus generated by Intel SaturnI/O PCI-ISA bridge. On-board SCSI
+	  (NCR 810 on PCI) Ethernet (Digital 21040), KBD, MOUSE (PS2 style),
+	  SuperI/O (2S, 1P, FD), RTC/NVRAM. Boot ROM is EPROM.  PC-AT size.
+	  Runs from standard PC power supply.
+
+config ALPHA_EV5
+	bool "EV5 CPU(s) (model 5/xxx)?" if ALPHA_LYNX
+	default y if ALPHA_RX164 || ALPHA_RAWHIDE || ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_RUFFIAN || ALPHA_SABLE && ALPHA_GAMMA || ALPHA_NORITAKE && ALPHA_PRIMO || ALPHA_MIKASA && ALPHA_PRIMO || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_EB164 || ALPHA_ALCOR
+
+config ALPHA_EV4
+	bool
+	default y if ALPHA_LYNX && !ALPHA_EV5
+
+config ALPHA_CIA
+	bool
+	depends on ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_RUFFIAN || ALPHA_NORITAKE && ALPHA_PRIMO || ALPHA_MIKASA && ALPHA_PRIMO || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_EB164 || ALPHA_ALCOR
+	default y
+
+config ALPHA_EV56
+	bool "EV56 CPU (speed >= 366MHz)?" if ALPHA_ALCOR
+	default y if ALPHA_RX164 || ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_RUFFIAN || ALPHA_PC164 || ALPHA_TAKARA
+
+config ALPHA_EV56
+	prompt "EV56 CPU (speed >= 333MHz)?"
+	depends on ALPHA_NORITAKE || ALPHA_PRIMO
+
+config ALPHA_EV56
+	prompt "EV56 CPU (speed >= 400MHz)?"
+	depends on ALPHA_RAWHIDE
+
+config ALPHA_PRIMO
+	bool "EV5 CPU daughtercard (model 5/xxx)?"
+	depends on ALPHA_NORITAKE || ALPHA_MIKASA
+	help
+	  Say Y if you have an AS 1000 5/xxx or an AS 1000A 5/xxx.
+
+config ALPHA_GAMMA
+	bool "EV5 CPU(s) (model 5/xxx)?"
+	depends on ALPHA_SABLE
+	help
+	  Say Y if you have an AS 2000 5/xxx or an AS 2100 5/xxx.
+
+config ALPHA_GAMMA
+	bool
+	depends on ALPHA_LYNX
+	default y
+
+config ALPHA_T2
+	bool
+	depends on ALPHA_SABLE || ALPHA_LYNX
+	default y
+
+config ALPHA_PYXIS
+	bool
+	depends on ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_RUFFIAN
+	default y
+
+config ALPHA_EV6
+	bool
+	depends on ALPHA_NAUTILUS || ALPHA_WILDFIRE || ALPHA_TITAN || ALPHA_SHARK || ALPHA_DP264 || ALPHA_EIGER || ALPHA_MARVEL
+	default y
+
+config ALPHA_TSUNAMI
+	bool
+	depends on ALPHA_SHARK || ALPHA_DP264 || ALPHA_EIGER
+	default y
+
+config ALPHA_EV67
+	bool "EV67 (or later) CPU (speed > 600MHz)?" if ALPHA_DP264 || ALPHA_EIGER
+	default y if ALPHA_NAUTILUS || ALPHA_WILDFIRE || ALPHA_TITAN || ALPHA_SHARK || ALPHA_MARVEL
+	help
+	  Is this a machine based on the EV67 core?  If in doubt, select N here
+	  and the machine will be treated as an EV6.
+
+config ALPHA_MCPCIA
+	bool
+	depends on ALPHA_RAWHIDE
+	default y
+
+config ALPHA_POLARIS
+	bool
+	depends on ALPHA_RX164
+	default y
+
+config ALPHA_IRONGATE
+	bool
+	depends on ALPHA_NAUTILUS
+	default y
+
+config GENERIC_HWEIGHT
+	bool
+	default y if !ALPHA_EV67
+
+config ALPHA_AVANTI
+	bool
+	depends on ALPHA_XL || ALPHA_AVANTI_CH
+	default y
+	help
+	  Avanti AS 200, AS 205, AS 250, AS 255, AS 300, and AS 400-based
+	  Alphas. Info at
+	  <http://www.unix-ag.org/Linux-Alpha/Architectures/Avanti.html>.
+
+config ALPHA_BROKEN_IRQ_MASK
+	bool
+	depends on ALPHA_GENERIC || ALPHA_PC164
+	default y
+
+config VGA_HOSE
+	bool
+	depends on VGA_CONSOLE && (ALPHA_GENERIC || ALPHA_TITAN || ALPHA_MARVEL || ALPHA_TSUNAMI)
+	default y
+	help
+	  Support VGA on an arbitrary hose; needed for several platforms
+	  which always have multiple hoses, and whose consoles support it.
+
+
+config ALPHA_QEMU
+	bool "Run under QEMU emulation"
+	depends on !ALPHA_GENERIC
+	help
+	  Assume the presence of special features supported by QEMU PALcode
+	  that reduce the overhead of system emulation.
+
+	  Generic kernels will auto-detect QEMU.  But when building a
+	  system-specific kernel, the assumption is that we want to
+	  eliminate as many runtime tests as possible.
+
+	  If unsure, say N.
+
+
+config ALPHA_SRM
+	bool "Use SRM as bootloader" if ALPHA_CABRIOLET || ALPHA_AVANTI_CH || ALPHA_EB64P || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_EB164 || ALPHA_ALCOR || ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_NAUTILUS || ALPHA_NONAME
+	depends on TTY
+	default y if ALPHA_JENSEN || ALPHA_MIKASA || ALPHA_SABLE || ALPHA_LYNX || ALPHA_NORITAKE || ALPHA_DP264 || ALPHA_RAWHIDE || ALPHA_EIGER || ALPHA_WILDFIRE || ALPHA_TITAN || ALPHA_SHARK || ALPHA_MARVEL
+	help
+	  There are two different types of booting firmware on Alphas: SRM,
+	  which is command line driven, and ARC, which uses menus and arrow
+	  keys. Details about the Linux/Alpha booting process are contained in
+	  the Linux/Alpha FAQ, accessible on the WWW from
+	  <http://www.alphalinux.org/>.
+
+	  The usual way to load Linux on an Alpha machine is to use MILO
+	  (a bootloader that lets you pass command line parameters to the
+	  kernel just like lilo does for the x86 architecture) which can be
+	  loaded either from ARC or can be installed directly as a permanent
+	  firmware replacement from floppy (which requires changing a certain
+	  jumper on the motherboard). If you want to do either of these, say N
+	  here. If MILO doesn't work on your system (true for Jensen
+	  motherboards), you can bypass it altogether and boot Linux directly
+	  from an SRM console; say Y here in order to do that. Note that you
+	  won't be able to boot from an IDE disk using SRM.
+
+	  If unsure, say N.
+
+config ARCH_MAY_HAVE_PC_FDC
+	def_bool y
+
+config SMP
+	bool "Symmetric multi-processing support"
+	depends on ALPHA_SABLE || ALPHA_LYNX || ALPHA_RAWHIDE || ALPHA_DP264 || ALPHA_WILDFIRE || ALPHA_TITAN || ALPHA_GENERIC || ALPHA_SHARK || ALPHA_MARVEL
+	help
+	  This enables support for systems with more than one CPU. If you have
+	  a system with only one CPU, say N. If you have a system with more
+	  than one CPU, say Y.
+
+	  If you say N here, the kernel will run on uni- and multiprocessor
+	  machines, but will use only one CPU of a multiprocessor machine. If
+	  you say Y here, the kernel will run on many, but not all,
+	  uniprocessor machines. On a uniprocessor machine, the kernel
+	  will run faster if you say N here.
+
+	  See also the SMP-HOWTO available at
+	  <https://www.tldp.org/docs.html#howto>.
+
+	  If you don't know what to do here, say N.
+
+config NR_CPUS
+	int "Maximum number of CPUs (2-32)"
+	range 2 32
+	depends on SMP
+	default "32" if ALPHA_GENERIC || ALPHA_MARVEL
+	default "4" if !ALPHA_GENERIC && !ALPHA_MARVEL
+	help
+	  MARVEL support can handle a maximum of 32 CPUs, all the others
+	  with working support have a maximum of 4 CPUs.
+
+config ARCH_SPARSEMEM_ENABLE
+	bool "Sparse Memory Support"
+	help
+	  Say Y to support efficient handling of discontiguous physical memory,
+	  for systems that have huge holes in the physical address space.
+
+config ALPHA_WTINT
+	bool "Use WTINT" if ALPHA_SRM || ALPHA_GENERIC
+	default y if ALPHA_QEMU
+	default n if ALPHA_EV5 || ALPHA_EV56 || (ALPHA_EV4 && !ALPHA_LCA)
+	default n if !ALPHA_SRM && !ALPHA_GENERIC
+	default y if SMP
+	help
+	  The Wait for Interrupt (WTINT) PALcall attempts to place the CPU
+	  to sleep until the next interrupt.  This may reduce the power
+	  consumed, and the heat produced by the computer.  However, it has
+	  the side effect of making the cycle counter unreliable as a timing
+	  device across the sleep.
+
+	  For emulation under QEMU, definitely say Y here, as we have other
+	  mechanisms for measuring time than the cycle counter.
+
+	  For EV4 (but not LCA), EV5 and EV56 systems, or for systems running
+	  MILO, sleep mode is not supported so you might as well say N here.
+
+	  For SMP systems we cannot use the cycle counter for timing anyway,
+	  so you might as well say Y here.
+
+	  If unsure, say N.
+
+# LARGE_VMALLOC is racy, if you *really* need it then fix it first
+config ALPHA_LARGE_VMALLOC
+	bool
+	help
+	  Process creation and other aspects of virtual memory management can
+	  be streamlined if we restrict the kernel to one PGD for all vmalloc
+	  allocations.  This equates to about 8GB.
+
+	  Under normal circumstances, this is so far and above what is needed
+	  as to be laughable.  However, there are certain applications (such
+	  as benchmark-grade in-kernel web serving) that can make use of as
+	  much vmalloc space as is available.
+
+	  Say N unless you know you need gobs and gobs of vmalloc space.
+
+config VERBOSE_MCHECK
+	bool "Verbose Machine Checks"
+
+config VERBOSE_MCHECK_ON
+	int "Verbose Printing Mode (0=off, 1=on, 2=all)"
+	depends on VERBOSE_MCHECK
+	default 1
+	help
+	  This option allows the default printing mode to be set, and then
+	  possibly overridden by a boot command argument.
+
+	  For example, if one wanted the option of printing verbose
+	  machine checks, but wanted the default to be as if verbose
+	  machine check printing was turned off, then one would choose
+	  the printing mode to be 0. Then, upon reboot, one could add
+	  the boot command line "verbose_mcheck=1" to get the normal
+	  verbose machine check printing, or "verbose_mcheck=2" to get
+	  the maximum information available.
+
+	  Take the default (1) unless you want more control or more info.
+
+choice
+	prompt "Timer interrupt frequency (HZ)?"
+	default HZ_128 if ALPHA_QEMU
+	default HZ_1200 if ALPHA_RAWHIDE
+	default HZ_1024
+	help
+	  The frequency at which timer interrupts occur.  A high frequency
+	  minimizes latency, whereas a low frequency minimizes overhead of
+	  process accounting.  The later effect is especially significant
+	  when being run under QEMU.
+
+	  Note that some Alpha hardware cannot change the interrupt frequency
+	  of the timer.  If unsure, say 1024 (or 1200 for Rawhide).
+
+	config HZ_32
+		bool "32 Hz"
+	config HZ_64
+		bool "64 Hz"
+	config HZ_128
+		bool "128 Hz"
+	config HZ_256
+		bool "256 Hz"
+	config HZ_1024
+		bool "1024 Hz"
+	config HZ_1200
+		bool "1200 Hz"
+endchoice
+
+config HZ
+	int
+	default 32 if HZ_32
+	default 64 if HZ_64
+	default 128 if HZ_128
+	default 256 if HZ_256
+	default 1200 if HZ_1200
+	default 1024
+
+config SRM_ENV
+	tristate "SRM environment through procfs"
+	depends on PROC_FS
+	help
+	  If you enable this option, a subdirectory inside /proc called
+	  /proc/srm_environment will give you access to the all important
+	  SRM environment variables (those which have a name) and also
+	  to all others (by their internal number).
+
+	  SRM is something like a BIOS for Alpha machines. There are some
+	  other such BIOSes, like AlphaBIOS, which this driver cannot
+	  support (hey, that's not SRM!).
+
+	  Despite the fact that this driver doesn't work on all Alphas (but
+	  only on those which have SRM as their firmware), it's save to
+	  build it even if your particular machine doesn't know about SRM
+	  (or if you intend to compile a generic kernel). It will simply
+	  not create those subdirectory in /proc (and give you some warning,
+	  of course).
+
+	  This driver is also available as a module and will be called
+	  srm_env then.
+
+endmenu
+
+# DUMMY_CONSOLE may be defined in drivers/video/console/Kconfig
+# but we also need it if VGA_HOSE is set
+config DUMMY_CONSOLE
+	bool
+	depends on VGA_HOSE
+	default y