Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 143 insertions, 0 deletions

diff --git a/arch/arm/boot/compressed/vmlinux.lds.S b/arch/arm/boot/compressed/vmlinux.lds.S
new file mode 100644
index 000000000..3fcb3e62d
--- /dev/null
+++ b/arch/arm/boot/compressed/vmlinux.lds.S
@@ -0,0 +1,143 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ *  Copyright (C) 2000 Russell King
+ */
+#include <asm/vmlinux.lds.h>
+
+#ifdef CONFIG_CPU_ENDIAN_BE8
+#define ZIMAGE_MAGIC(x) ( (((x) >> 24) & 0x000000ff) | \
+			  (((x) >>  8) & 0x0000ff00) | \
+			  (((x) <<  8) & 0x00ff0000) | \
+			  (((x) << 24) & 0xff000000) )
+#else
+#define ZIMAGE_MAGIC(x) (x)
+#endif
+
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+  /DISCARD/ : {
+    COMMON_DISCARDS
+    *(.ARM.exidx*)
+    *(.ARM.extab*)
+    *(.note.*)
+    *(.rel.*)
+    *(.printk_index)
+    /*
+     * Discard any r/w data - this produces a link error if we have any,
+     * which is required for PIC decompression.  Local data generates
+     * GOTOFF relocations, which prevents it being relocated independently
+     * of the text/got segments.
+     */
+    *(.data)
+  }
+
+  . = TEXT_START;
+  _text = .;
+
+  .text : {
+    _start = .;
+    *(.start)
+    *(.text)
+    *(.text.*)
+    ARM_STUBS_TEXT
+  }
+  .table : ALIGN(4) {
+    _table_start = .;
+    LONG(ZIMAGE_MAGIC(6))
+    LONG(ZIMAGE_MAGIC(0x5a534c4b))
+    LONG(ZIMAGE_MAGIC(__piggy_size_addr - _start))
+    LONG(ZIMAGE_MAGIC(_kernel_bss_size))
+    LONG(ZIMAGE_MAGIC(TEXT_OFFSET))
+    LONG(ZIMAGE_MAGIC(MALLOC_SIZE))
+    LONG(0)
+    _table_end = .;
+  }
+  .rodata : {
+    *(.rodata)
+    *(.rodata.*)
+    *(.data.rel.ro)
+    *(.data.rel.ro.*)
+  }
+  .piggydata : {
+    *(.piggydata)
+    __piggy_size_addr = . - 4;
+  }
+
+  . = ALIGN(4);
+  _etext = .;
+
+  .got.plt		: { *(.got.plt) }
+#ifndef CONFIG_EFI_STUB
+  _got_start = .;
+  .got			: { *(.got) }
+  _got_end = .;
+#endif
+
+  /* ensure the zImage file size is always a multiple of 64 bits */
+  /* (without a dummy byte, ld just ignores the empty section) */
+  .pad			: { BYTE(0); . = ALIGN(8); }
+
+#ifdef CONFIG_EFI_STUB
+  .data : ALIGN(4096) {
+    __pecoff_data_start = .;
+    _got_start = .;
+    *(.got)
+    _got_end = .;
+    /*
+     * The EFI stub always executes from RAM, and runs strictly before the
+     * decompressor, so we can make an exception for its r/w data, and keep it
+     */
+    *(.data.efistub .bss.efistub)
+    __pecoff_data_end = .;
+
+    /*
+     * PE/COFF mandates a file size which is a multiple of 512 bytes if the
+     * section size equals or exceeds 4 KB
+     */
+    . = ALIGN(512);
+  }
+  __pecoff_data_rawsize = . - ADDR(.data);
+#endif
+
+  _edata = .;
+
+  /*
+   * The image_end section appears after any additional loadable sections
+   * that the linker may decide to insert in the binary image.  Having
+   * this symbol allows further debug in the near future.
+   */
+  .image_end (NOLOAD) : {
+    /*
+     * EFI requires that the image is aligned to 512 bytes, and appended
+     * DTB requires that we know where the end of the image is.  Ensure
+     * that both are satisfied by ensuring that there are no additional
+     * sections emitted into the decompressor image.
+     */
+    _edata_real = .;
+  }
+
+  _magic_sig = ZIMAGE_MAGIC(0x016f2818);
+  _magic_start = ZIMAGE_MAGIC(_start);
+  _magic_end = ZIMAGE_MAGIC(_edata);
+  _magic_table = ZIMAGE_MAGIC(_table_start - _start);
+
+  . = BSS_START;
+  __bss_start = .;
+  .bss			: { *(.bss) }
+  _end = .;
+
+  . = ALIGN(8);		/* the stack must be 64-bit aligned */
+  .stack		: { *(.stack) }
+
+  PROVIDE(__pecoff_data_size = ALIGN(512) - ADDR(.data));
+  PROVIDE(__pecoff_end = ALIGN(512));
+
+  STABS_DEBUG
+  DWARF_DEBUG
+  ARM_DETAILS
+
+  ARM_ASSERTS
+}
+ASSERT(_edata_real == _edata, "error: zImage file size is incorrect");