Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 216 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/kirkwood-topkick.dts b/arch/arm/boot/dts/kirkwood-topkick.dts
new file mode 100644
index 000000000..a5b51e29f
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-topkick.dts
@@ -0,0 +1,216 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+
+/ {
+	model = "Universal Scientific Industrial Co. Topkick-1281P2";
+	compatible = "usi,topkick-1281P2", "usi,topkick", "marvell,kirkwood-88f6282", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			/*
+			 * Switch positions
+			 *
+			 *     /-SW_LEFT(2)
+			 *     |
+			 *     |   /-SW_IDLE
+			 *     |   |
+			 *     |   |   /-SW_RIGHT
+			 *     |   |   |
+			 * PS [L] [I] [R] LEDS
+			 */
+			pinctrl-0 = <&pmx_sw_left &pmx_sw_right
+				     &pmx_sw_idle &pmx_sw_left2>;
+			pinctrl-names = "default";
+
+			pmx_led_disk_yellow: pmx-led-disk-yellow {
+				marvell,pins = "mpp21";
+				marvell,function = "gpio";
+			};
+
+			pmx_sata0_pwr_enable: pmx-sata0-pwr-enable {
+				marvell,pins = "mpp36";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_sys_red: pmx-led-sys-red {
+				marvell,pins = "mpp37";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_sys_blue: pmx-led-sys-blue {
+				marvell,pins = "mpp38";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_wifi_green: pmx-led-wifi-green {
+				marvell,pins = "mpp39";
+				marvell,function = "gpio";
+			};
+
+			pmx_sw_left: pmx-sw-left {
+				marvell,pins = "mpp43";
+				marvell,function = "gpio";
+			};
+
+			pmx_sw_right: pmx-sw-right {
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+
+			pmx_sw_idle: pmx-sw-idle {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+
+			pmx_sw_left2: pmx-sw-left2 {
+				marvell,pins = "mpp46";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_wifi_yellow: pmx-led-wifi-yellow {
+				marvell,pins = "mpp48";
+				marvell,function = "gpio";
+			};
+		};
+
+		serial@12000 {
+			status = "okay";
+		};
+
+		sata@80000 {
+			status = "okay";
+			nr-ports = <1>;
+		};
+
+		i2c@11000 {
+			status = "okay";
+		};
+
+		mvsdio@90000 {
+			pinctrl-0 = <&pmx_sdio>;
+			pinctrl-names = "default";
+			status = "okay";
+			/* No CD or WP GPIOs */
+			broken-cd;
+		};
+	};
+
+	gpio-leds {
+		/*
+		 * GPIO LED layout
+		 *
+		 *       /-SYS_LED(2)
+		 *       |
+		 *       |   /-DISK_LED
+		 *       |   |
+		 *       |   |   /-WLAN_LED(2)
+		 *       |   |   |
+		 * [SW] [*] [*] [*]
+		 */
+
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_led_disk_yellow &pmx_led_sys_red
+			     &pmx_led_sys_blue &pmx_led_wifi_green
+			     &pmx_led_wifi_yellow>;
+		pinctrl-names = "default";
+
+		disk {
+			label = "topkick:yellow:disk";
+			gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "disk-activity";
+		};
+		system2 {
+			label = "topkick:red:system";
+			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+		};
+		system {
+			label = "topkick:blue:system";
+			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+		wifi {
+			label = "topkick:green:wifi";
+			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+		};
+		wifi2 {
+			label = "topkick:yellow:wifi";
+			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
+		};
+	};
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_sata0_pwr_enable>;
+		pinctrl-names = "default";
+
+		sata0_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "SATA0 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 4 0>;
+		};
+	};
+};
+
+&nand {
+	status = "okay";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0000000 0x180000>;
+	};
+
+	partition@180000 {
+		label = "u-boot env";
+		reg = <0x0180000 0x20000>;
+	};
+
+	partition@200000 {
+		label = "uImage";
+		reg = <0x0200000 0x600000>;
+	};
+
+	partition@800000 {
+		label = "uInitrd";
+		reg = <0x0800000 0x1000000>;
+	};
+
+	partition@1800000 {
+		label = "rootfs";
+		reg = <0x1800000 0xe800000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};