Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 97 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/s3c6410-smdk6410.dts b/arch/arm/boot/dts/s3c6410-smdk6410.dts
new file mode 100644
index 000000000..581309e7f
--- /dev/null
+++ b/arch/arm/boot/dts/s3c6410-smdk6410.dts
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung S3C6410 based SMDK6410 board device tree source.
+ *
+ * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com>
+ *
+ * Device tree source file for Samsung SMDK6410 board which is based on
+ * Samsung's S3C6410 SoC.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+#include "s3c6410.dtsi"
+
+/ {
+	model = "Samsung SMDK6410 board based on S3C6410";
+	compatible = "samsung,smdk6410", "samsung,s3c6410";
+
+	memory@50000000 {
+		device_type = "memory";
+		reg = <0x50000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttySAC0,115200n8 earlyprintk rootwait root=/dev/mmcblk0p1";
+	};
+
+	fin_pll: oscillator-0 {
+		compatible = "fixed-clock";
+		clock-frequency = <12000000>;
+		clock-output-names = "fin_pll";
+		#clock-cells = <0>;
+	};
+
+	xusbxti: oscillator-1 {
+		compatible = "fixed-clock";
+		clock-output-names = "xusbxti";
+		clock-frequency = <48000000>;
+		#clock-cells = <0>;
+	};
+
+	srom-cs1-bus@18000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x18000000 0x8000000>;
+		ranges;
+
+		ethernet@18000000 {
+			compatible = "smsc,lan9115";
+			reg = <0x18000000 0x10000>;
+			interrupt-parent = <&gpn>;
+			interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+			phy-mode = "mii";
+			reg-io-width = <4>;
+			smsc,force-internal-phy;
+		};
+	};
+};
+
+&clocks {
+	clocks = <&fin_pll>;
+};
+
+&sdhci0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_data>, <&uart0_fctl>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_data>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_data>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_data>;
+	status = "okay";
+};